July Hot Tools - WendellPeters.com
Transcription
July Hot Tools - WendellPeters.com
HOT TOOLS New Products Page 4 Shop & Tech Page 10 THE PRODUCTS, IDEAS AND DEALS YOU NEED TO BE YOUR BEST. 3/8" Drive Breaker Bars Page 4 JUL '16 HOT TOOLS // FEATURED PRODUCT Here’s your chance to stock up on two sets each (shallow and deep) of 1/2" drive 6-point metric impact sockets and 3/8" drive 6-point metric impact sockets — plus four 3/8" drive extensions, three 1/2" drive extensions and two universal joints! For premium performance, reach for premium tools: • Manufactured from special alloy steel and heat treated for optimum strength and durability • Industrial finish protects against corrosion for longer tool life • Flank Drive® wrenching system delivers up to 15–20% more turning power, with less risk of damage to fasteners and tools • Chamfered drive ends for easy engagement and more confidence on every job 62 pc 3/8" & 1/2" Drive 6-Point Metric Impact Socket & Extension Set • ( 10) 1/2" Drive 6-Point Metric Shallow Impact Sockets 10–19 mm (IMM100A–IMM190) • ( 15) 1/2" Drive 6-Point Metric Deep Impact Sockets 10–24 mm (SIMM100A–SIMM240) • ( 14) 3/8" Drive 6-Point Metric Shallow Impact Sockets 8–19, 21, 24 mm (IMFM8A–IMFM19, IMFM21, IMFM24) • ( 14) 3/8" Drive 6-Point Metric Deep Impact Sockets 8–19, 21, 24 mm (SIMFM8A–SIMFM19, SIMFM21, SIMFM24) • (3) 1/2" Drive Impact Extensions 3" (IMX32B), 5-3/32" (IMX52) and 11-1/4" (IMX112) • (4) 3/8" Drive Impact Extensions 1-3/4" (IMX11), 3" (IMX31), 6" (IMX61) and 11" (IMX111) • (1) 1/2" Drive Swivel Impact Universal Joint (IP80D) • (1) 3/8" Drive Swivel Impact Universal Joint (IPF800B) 2016PRESHOW2 $1,470.70 Talk to your Snap-on® Franchisee or other sales representative for details on this limited-time offer. 2 www.snapon.com JUL 2016 // FEATURED PRODUCT HOT TOOLS // FEATURED PRODUCT JUL 2016 // FEATURED PRODUCT www.snapon.com 3 NEW PRODUCTS // INNOVATION SHOWCASE PRODUCTS INNOVATED TO MAKE YOU FASTER, SMARTER AND MORE PRODUCTIVE. 7 pc 12-Point SAE Ratcheting Box/Open End Combination Wrench Set • P atented ratcheting gear design delivers up to 20% more ultimate torque and 95% additional cycle life •0 ° offset, uni-directional design utilizes innovative Snap-on® technology, to deliver more power in less lateral space, helping to access and remove the most stubborn fasteners in tight spaces • 80-tooth ratcheting gear minimizes swing arc needed to move fasteners in restricted spaces • Set contains (7) wrenches, 3/8–3/4" OXR707 $343.95 12 V Li-Ion Compact Engine Starter/ USB Charger and Light 3-Pin Brake Piston Tool • I deal for personal use emergency jumps, yet powerful enough for the shop • For use on vehicles that have a disc brake caliper equipped with a singular piston and the emergency/parking brake system is incorporated within this brake caliper housing •U SB port 5 VDC, 2 A for charging devices like a phone •C harge internal battery with AC from wall or DC from vehicle • Pins fully adjust and mate up to bores on brake piston surface EEJP200M $279.95 BTPUCK3 $55.60 Snap-on® Breaker Bars • E xtra long handle for increased reach and improved leverage •M anufactured from special alloy steel, precision forged, and heat treated for optimum strength and durability •N ickel Chrome finish helps protect against corrosion and makes it easy to wipe clean 3/8" Drive Breaker Bar with Extra Long Handle F18LA • Manufactured from special alloy steel $85.95 • Precision machined and heat treated for optimum strength and durability 3/8" Drive Soft Grip Breaker Bar with Extra Long Handle FHBB18A 1/4" Drive 3/16" Stubby Flex Hex Bit Socket • Nickel chrome finish helps protect against corrosion and makes it easy to wipe clean TUA6E $46.65 $96.95 18 V Cordless Grease Gun Kit • T wo-speed, hi-torque 18 V DC motor delivers outstanding flow and pressure •D ual motor protection includes self-resetting thermocouple •M achined and hardened piston with plated steel barrel and premium grease follower CGG8850 4 $608.95 www.snapon.com JULY 2016 // NEW PRODUCTS NEW PRODUCTS // INNOVATION SHOWCASE 4 pc Flank Drive® Plus Adjustable Wrench Set • A djustable jaws feature the Flank Drive Plus; wrenching system that “bites” into the fastener for more turning power with less risk of tool or fastener damage ® Digital Contact/ Non-Contact Laser Tachometer • Obtains RPM readings up to 25 feet away from its target •Q uick reference SAE and metric sizing FADH704B $345.80 • Non-contact laser mode works great in tight areas, keeping user away from moving parts • Memory recall brings back the last measurement on the display before powering off 8 pc T-Handle Tamper Proof TORX® Set •D elivers superior turning power, and allows maximum pressure to be applied when loosening difficult fasteners with both T and L applications •B lades constructed from high-strength steel, hardened for durability and use on tamper-proof fasteners • I deal for use on fan or serpentine belts, industrial equipment, racecars, marine, motor sports, ATV, big rig engines and more • Uses a standard 9 V battery EEDMTACH1A $402.95 •C olor-coded handles identify drive configuration at a glance AWSGTPT800 $107.95 6" Long Mini Diagonal Cutter • Ergonomic contour cushion grip handle provides up to 22% increased cutting leverage • Tightly toleranced, induction hardened, parallel cutting edges engineered to provide repeated cuts of hard wire, soft wire, spring steel, and cable ties at all locations along the blades • Differential heat treatment produces strength and toughness 808CF $73.45 Rechargeable Shop Light • 8 4 high-output SMD LEDs produce approximately 550 lumens • 4 ,400 mAh lithium ion rechargeable battery •B right spotlight on top 14.4–18 V Multi-Bay Charger ECFLED84 $156.95 • Simultaneously charges three batteries • 1 A USB charger • 500 W output Industrial Hand Rivet Tool Kit (Blue-Point ) ® CTC123 $369.95 • A nti-wear design with high strength alloy body and steel insert • S pecial shock absorber on alloy body • Extra long 10-1/4” handles to increase leverage • Four interchangeable nose pieces for setting multiple rivet sizes HR-26PKC $134.95 10” Plier Organizer • Non-slip rubber base is gentle on surfaces and keeps tools in place • Holds 10 tools per organizer KAPL10 JULY 2016 // NEW PRODUCTS www.snapon.com $17.50 5 LIMITED TIME DEALS // DON’T WAIT GET A FOLDING CHAIR WHEN YOU PURCHASE ANY OF THESE WRENCH SETS.* 10 pc 12-Point Flank Drive® Plus Standard Metric Combination Wrench Set 10 pc 12-Point Flank Drive® Plus Metric Ratcheting Box/Open End Combination Wrench Set • Set contains SOEXM10–SOEXM19 (10 pc) (10–19 mm) in storage tray • Set contains SOEXRM10–SOEXRM19 (10 pc) (10–19mm) in storage tray SOEXM710 $414.95 SOEXRM710 $459.95 10 pc 12-Point Metric Combination Wrench Set (not shown) 10 pc 12-Point Ratcheting Box/Speed Open End Combination Wrench Set (not shown) • S et contains OEXM100B–OEXM190B (10 pc) (10–19 mm) in storage tray • Set contains SRXRM10–SRXRM19 (10 pc) (10–19 mm) OEXM710B $377.95 SRXRM710 $459.95 6 pc 12-Point 0° Offset Metric Box Wrench Set • Set contains XDHFM1011, XDHFM1213, XDHFM1415, XDHFM1516, XDHFM1719 and XDHFM1820 (6 pc) (10–20 mm) XDHFM606 $329.20 5 pc 12-Point 0° Offset Box Wrench Set (not shown) • Set contains XDHF810–XDHF2226 (5 pc) (1/4–13/16") XDHF605 $257.70 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks are not available for chair, but Franchisee or other sales representative may substitute a different product. Offer cannot be combined with another trade-in or discount. 6 www.snapon.com JULY 2016 // RAD02C LIMITED TIME DEALS // UP NEXT GET A MINIMUM OF $35 OFF WHEN YOU TRADE IN FOR THESE 3/8" DRIVE IMPACT WRENCHES. * 3/8" Drive Impact Wrench • 325 ft-lb maximum torque; 10,700 RPM free speed; 1,400 blows per minute • One-piece magnesium housing for precise internal component alignment to reduce vibration • Twin-hammer impact mechanism delivers hard-hitting blows with fewer moving parts to quickly remove stubborn fasteners • Eight-vane motor delivers maximum speed and torque • Lightweight, balanced design distributes weight evenly to reduce user fatigue • Comfort cushion trigger button allows the user to work comfortably with less finger stress MG325 $469.95 3/8" Drive Impact Wrench (Blue-Point®) • Built-in five-position adjustable air regulator plus a variable-speed trigger for maximum user control • Tapered nose increases accessibility to confined areas • Twin-hammer impact mechanism designed to hit hard yet offer tool longevity • One-year limited warranty AT380A *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. $257.95 4 pc 3/8" Drive Snap Ring Impact Extension • Set contains (4) extensions (IMX11–IMX111) 1-3/4, 3, 6 and 11" in storage tray 3 pc 3/8" Drive Lug Nut Socket Set • Includes FLSM1719 (17/19 mm) and FLSM2122 (21/22 mm) Metric Flip Lug Nut Sockets plus IMX31 Impact Extension 203FLSM $95.55 204IMXA $103.95 2 pc 3/8" Drive Impact Swivel Extension Set • Laser welded pivot pin for smooth, full 30° swivel action for efficient power transfer • Includes IPFX6 and IPFX9 (2 pc) (6 and 9") 202IPFX JUL 2016 // RAD20C $168.65 www.snapon.com 7 LIMITED TIME DEALS // COMING SOON GET ESSENTIAL SAVINGS ON THESE SELECT CORDLESS TOOLS AND ACCESSORIES.* Rechargeable 14.4 V MicroLithium Cordless Work Light • 200 lumens output 1/4" Hex Drive MicroLithium Cordless Screwdriver Kit • 120° rotating head • 100 in-lb (11.3 N·m) of torque output • Eight-hour run time with low battery indicator • Digital variable-speed toggle style trigger for precise control • Tempered glass lens • Quick 55-minute battery charge for less down time • Aluminum head • Resists automotive fluids • 9-position clutch allows you to dial in the proper torque • Battery (CTB8172) and charger (CTC772) not included • Built-in light displays the battery charge state CTL761 $73.95 SALE $66.50 CTS725 $324.95 SALE $292.45 Digital Display Circuit Tester • Used to detect voltage, power, ground and circuit integrity • Provides one-handed operation of CT and DV Voltage digital display of a multimeter • Surge protected circuitry displays 3–19.99 V DC (+/- 0.3 V accuracy) Power Bit Set (Blue-Point®) • Seven six-lobe star (tamper proof) insert bits EECT400 $97.95 SALE $87.95 • Three square insert bits • Four PHILLIPS® insert bits • Four slotted insert bits • Two clutch insert bits • Three square power bits 7 pc Hex Shank Drill Bit Set 14 pc 6" Power Bit Set (Blue-Point®) • Includes DBH1/16B–DBH1/4BB (1/16–1/4") in DBH7B-1 kit bag • T8, T10, T15, T20, T25, T27, T30 DBH7B $68.20 SALE $61.35 YA52PBSQC $83.95 SALE $75.50 • PHILLIPS® #1, #2, #3 Square #1, #2 • 6" stainless adaptor with magnet retention CTS561BITXL $58.75 SALE $52.85 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. 8 www.snapon.com JUL 2016 // RAD14C LIMITED TIME DEALS // DON’T WAIT BUY THIS BALL JOINT MASTER SET AND GET THIS 36" PRYBAR. * Master Ball Joint/Universal Joint Press Set •M aster ball joint press set covers the majority of US SUVs, light trucks and passenger cars • Installs and removes ball joints with pre-fitted straight grease fittings • Press frame features large throat for increased ball joint applications and vise mount capability for U-joint applications BJP1 $749.95 36" Striking Prybar •B lade features a precision-ground edge, with angled design for maximum leverage while lifting and pulling on bar • F lared end of handle offers protection from off-center handle strikes •B lade extends through the handle and contacts the metal end cap to provide a continuous, solid, striking force $141.95 SPBS36A 5 pc Ball Joint Adaptor Set • S pecial application set for removal and installation of upper and lower ball joints • Includes BJP1-22A, BJP1-24A, BJP1-25A, BJP1-26A and BJP1-27A Ball Joint Adaptors in storage tray BJP1OPT $313.40 *Limited quantities. Participating Franchisees or other sales representatives only. Promotions are weekly and dates may vary by Franchisee or other sales representative. Rain checks may be available, but product may not be available for immediate delivery. Offer cannot be combined with another trade-in or discount. You must purchase BJP1 Master Set to receive SPBS36A Prybar. JUL 2016 // RAD34C www.snapon.com 9 PRODUCTIVITY SHOWCASE // THE RIGHT TOOLS, RIGHT NOW KEEP YOURSELF SAFE SO YOU CAN KEEP DOING WHAT YOU LOVE. SAVE NOW ON SAFETY EQUIPMENT. Technicians SuperCuff® Gloves Safety Glasses • S uperCuff design provides a super comfortable, snug and secure fit without restricting wrist and hand movement • Complies with ANZl® Z87.1-2003 and provides 99.9% UV protection ® •H eavy Lycra® panels between fingers allow for greater comfort and fit • Soft nose pad and soft temple tips provide comfort for long-time wearing • Anti-fog lens coating with anti-scratch protection • Sizes M, L, XL GLOVE500BLB $36.95 SALE $33.25 Original Mechanics Gloves • L ong-lasting two-layer thumb panel GLASS30BK $12.95 SALE $11.65 GLASS30R $12.95 SALE $11.65 GLASS31BK $12.95 SALE $11.65 GLASS31R $12.95 SALE $11.65 •M achine washable; will not shrink or fade •D urable abrasion-resistant synthetic palm • Sizes M, L, XL GLOVE600L $29.95 SALE $26.95 Mossy Oak® Mechanic Gloves • L ong lasting two-layer thumb panel •M achine washable; will not shrink or fade •M oisture-wicking trek dry material • Sizes M, L, XL GLOVE601L $31.95 SALE $28.75 Face Shield (Blue-Point®) • Adjustable, cushioned headband is removable • Includes visor (GA225-1) with PETG (impact resistance preferred) • Optional visor (GA225-2) with PC (high temperature resistance) is available GA225 $30.95 SALE $27.85 Headphone-Style Ear Protectors (Blue-Point®) • 2 5 dB noise reduction rating • A djust at each earpiece for proper alignment • A BS plastic domes with PVC-covered ear cushions GA3000B $40.75 SALE $36.65 Nitrile Technician’s Gloves Gel Cushioned Kneepads • Wide neoprene rear lower flap reduces chafing • Gel cushioned for maximum comfort • 1 00 pairs of gloves • Velcro® straps for easy on/off, secure fit and comfort • Sizes M, L, XL • Hinged pad extensions for a comfortable fit GLOVE8LA $24.95 SALE $22.50 10 KNEEPAD3 $86.05 SALE $77.45 www.snapon.com JUL 2016 // STRA6C SHOP SOLUTIONS // TIRE CHANGERS PROFIT CENTER. Tilt-back design— Reduces set up time and allows for a 15" rim width clearance. IT’S NOT JUST A PREMIUM TILT-BACK TIRE CHANGER. IT’S YOUR NEW BUSINESS PARTNER. High-torque 1 HP turntable motor—Minimizes turntable stalling. Dual clamping cylinders provide even clamping force on jaws to reduce wheel slippage. Clamping capacity—Clamps wheels up to 28" on the outside. Surge tank— Delivers additional air volume during the bead seating process. Bead seating jets—Are integrated into clamping jaws and force additional air into tire during inflation. Three-position bead breaker— Tilt-Back Tire Changer EEWH311B Covers multiple applications such as SUVs and light trucks with taller sidewalls. 52.65 $ $11,795.00 * PER WEEK • 260 WEEKS EC TERMS With $2,948.75 trade-in Pneumatic Bead Assist Provides users with additional capability when servicing low profile tires with stiff sidewalls. Pneumatic cylinder raises and lowers each of the specialized tools into place. Bead depressor—Pushes tire sidewall into the drop center and follows the tire as the turntable rotates for easier mounting. Top roller also helps keep the bead in dead center. Top roller—Allows user to lubricate top bead prior to dismounting tire. Wheel depressor—Applies downward pressure during initial clamping. Power lifting disc—Lifts tire off the lower bead rim to aid user during the dismount process. *Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated next to the payment example with the stated number of payments to be made, and example time price differential charge of 18.9%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. PPSA costs extra. See important credit notice on back cover. JULY 2016 // SHOP SOLUTIONS www.snapon.com 11 TOOL STORAGE // MASTERS SERIES YOU MASTERED THE SKILLS. WE MASTERED TOOL STORAGE. Double Bank Roll Cab • E xtended cab system provides two extra-wide drawers for extra storage capabilities • L ock'n Roll® system prevents drawers from drifting open during unit movement • 2" inch mounting centers provide maximum drawer arrangement flexibility • Ball bearing drawer slides with 227 lb capacity per drawer • Double wall construction and corner gussets for extra strength and rigidity • Superior structural foundation, from reinforced 14-gauge bottom channels • 54-1/4" W x 29-1/8" D • 8,341 square inches and 32,160 cubic inches of storage • 6,800 lb load capacity $8,025.00 KRL7022CPJK With $2,006.25 down payment or trade-in 35.85 $ * PER WEEK • 260 WEEKS EC TERMS *Extended Credit (EC) payment example is based on: the purchase price less a trade-in or cash down payment in the amount stated next to the payment example with the stated number of payments to be made, and example time price differential charge of 18.9%/yr (may be higher or lower based on credit approval and/or state). Weekly payments are subject to business credit approval. Taxes and costs of financing, e.g. PPSA costs extra. See important credit notice below for additional terms and conditions. **Flat Black Roll Cab comes with Black trim. Red PBO Gloss Black PC Royal Blue PCM Extreme Green PJJ Electric Orange PJK Flat Black** POT Add suffix to base stock number to choose color. While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Limited quantities. Participating Representatives only. All offers expire July 31, 2016. Offers cannot be combined with any other trade-in or discount. Snap-on and Blue-Point are trade marks, registered in the United States and other countries, of Snap-on Incorporated. ©Snap-on Incorporated 2016. All rights reserved. All other marks are trade marks of their respective holders. Important Credit Notice: Please be aware that the weekly payment is an estimate only and may not apply to you. Your actual payment may be different than the estimated financing payment shown. All credit sale contracts are subject to approved credit and the terms of the standard Snap-on Credit credit sales contract form. Not all applicants will qualify. Taxes, installation and costs of financing, such as charges for filing PPSA statements, are extra. Finance charges begin accruing at contract inception. Weekly payments shown are based on suggested list prices and your price may vary. Terms and finance charge rates may vary and such terms are subject to change without notice. In the event you fail to make payments when due, the terms of the contract will apply and late charges may be due. Please contact us regarding finance terms and restrictions. HTJULY16CNE Printed In U.S.A. Talk to us and others www.facebook.com/SnaponTools
Similar documents
SNAP-UP
applications in need of picking up dust, metal shavings or broken glass Lightweight ergonomic handle design AV1000A
More information