combination wrench sets

Transcription

CLASS # 52
COMBINATION WRENCH SETS
These combination wrenches are boxed on one end and open on the other.
They are drop forged, machined, heat treated, triple chrome plated and held
to tight tolerances so there is no ‘sloppy’ fit on the bolt or nut.
These wrenches have raised panels for strength and the sets come inside a
roll up pouch with grommets on the corners for hanging.
5 PC. SAE COMBO WRENCH SET:
Sizes:
3/8” - 7/16” - 1/2” - 9/16” - 5/8”
ITEM#: N799
Sizes:
3/8” - 7/16” - 1/2” - 9/16” - 5/8” - 11/16”
3/4” - 13/16” - 7/8” - 15/16” - 1”
ITEM#: 810
11 PC. METRIC COMBO WRENCH SET:
Sizes:
6mm - 7mm - 8mm - 10mm - 11mm - 12mm
13mm - 14mm - 15mm - 17mm - 19mm
ITEM#: 811
Sizes:
3/8” - 7/16” - 1/2” - 9/16” - 5/8” - 11/16”
3/4” - 13/16” - 7/8” - 15/16” - 1” - 1-1/16”
1-1/8” - 1-1/4”
ITEM#: 14PC
14 PC. METRIC COMBO WRENCH SET:
Sizes:
9mm - 11mm - 13mm - 14mm - 15mm
17mm - 19mm - 21mm - 23mm - 24mm
25mm - 27mm - 30mm - 32mm
ITEM#: 813
CLASS # 52
22 PC. SAE & METRIC COMBO SET
Highly polished, chrome vanadium steel wrenches in both SAE and metric
in an organized, vinyl pouch. These wrenches are heat treated and tempered
for strength and feature the raised panel design.
The set includes 11 SAE sizes from 1/4” to 7/8” and 11 metric sizes from
7mm to 19mm. The boxed ends are 12 point and this set is manufactured to
rigid standards to assure a lifetime of use. Import.
ITEM#:
24PC
DESCRIPTION:
22 PC. COMBO WRENCH SET SAE & METRIC
CLASS # 52
CONTINUOUS COMBO WRENCHES
METRIC
This is the ‘Cadillac’ of metric box & open end wrench sets. Drop forged,
specially hardened and triple chrome plated, but the best feature of this set is
that they do not skip a size like other sets.
They are 12 point boxed on one end and open on the other with rich, hand
polished, smooth handles. Both versions of this set are exceptional quality at
an incredible price. Imported.
ITEM#: 808 - 11 PC. METRIC WRENCH SET
SIZES: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, & 19mm
ITEM#: 809 - 13 PC. METRIC WRENCH SET
SIZES: 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, & 32mm
ITEM#:
DESCRIPTION:
808
11 PC. METRIC WRENCH SET - 9mm-19mm
809
13 PC. METRIC WRENCH SET - 20mm-32mm
CLASS # 52
LARGE COMBO WRENCH SETS
These larger combination wrench sets are made of chrome vanadium steel
with a black oxide finish and raised panel for extra strength. They feature 12
point, chamfered boxed ends and a 15° offset on the open end.
Each set comes in a roll up, vinyl pouch with a Velcro fastener and a carry
handle for convenience. Import.
6 PC. JUMBO WRENCH SET
SAE
6 PC. JUMBO WRENCH SET
METRIC
Sizes:
1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”,
1-7/8”, & 2”
Sizes:
35mm, 38mm, 41mm, 44mm,
48mm, & 50mm
ITEM#: 815
ITEM#: 819
11 PC. COMBO WRENCH SET
METRIC
Sizes:
34mm, 35mm, 36mm, 38mm,
40mm, 41mm, 42mm, 44mm,
46mm, 48mm & 50mm
ITEM#: 814M
SAE
4 PC. SUPER JUMBO WRENCH
SET - SAE
Sizes:
1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”,
1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”,
1-7/8” & 2”
Sizes:
2-1/8”, 2-1/4”, 2-3/8”, 2-1/2”,
ITEM#: 814
ITEM#: 816
CLASS # 52
ANGLE WRENCHES
Both ends of these wrenches are open for easy placement on hidden nuts
or bolts. One end is offset 15° and the other end is offset 60° allowing better
leverage and a longer turn on fasteners in a confined space or hidden behind
a larger object.
Made of chrome vanadium steel and triple chrome plated and polished to
resist corrosion and wear. Sets come in a roll up, vinyl pouch. Import.
11 PC. ANGLE WRENCH SET
SAE
SAE - JUMBO
Sizes:
3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
11/16”, 3/4”, 13/16”, 7/8”, 15/16”,
& 1”
Sizes:
1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”,
1-7/8”, & 2”
ITEM#: 807
ITEM#: 821
SAE
METRIC
Sizes:
3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
11/16”, 3/4”, 13/16”, 7/8”, 15/16”,
1”, 1-1/16”, 1-1/8”, 1-1/4”
Sizes:
10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm,
18mm, 19mm
ITEM#: ANGLE
ITEM#: ANGLEM
CLASS # 52
‘S’ SHAPED BOX WRENCHES
These wrenches have 12 point box ends on each side and feature 90° offset
heads. The lazy ‘S’ design allows them to fit easily into hard to reach places
while still providing a good grip and better leverage for the user.
Each wrench is drop forged, machined, heat-treated and polished to last for
years. There are two different sizes on each wrench, so each set has ten sizes
even though there are only five wrenches. Available in both SAE and metric
and includes a vinyl, roll up pouch. Imported.
SAE Sizes:
•
•
•
•
•
3/8” & 7/16”
1/2” & 9/16”
5/8” & 11/16”
3/4” & 13/16”
7/8” & 1”
ITEM#: 822
Metric Sizes:
•
•
•
•
•
10mm & 11mm
12mm & 13mm
14mm & 15mm
16mm & 17mm
18mm & 19mm
ITEM#: 822M
ITEM#:
DESCRIPTION:
822
5 PC. ‘S’ SHAPED BOX WRENCH SET SAE
822M
5 PC. ‘S’ SHAPED BOX WRENCH SET METRIC
CLASS # 52
5 PC. RATCHETING BOX WRENCH SET
These boxed end wrenches have a ratcheting mechanism built right into
each box end of the wrench. No need for changing sockets on a ratchet. Just
grab the ratcheting wrenches and go to work!
These wrenches make great emergency tool kit items because they save
space, and each end is a different size, so you actually get ten sizes with just
five wrenches. They are offset at the heads for easy use in tight spots.
The laminated steel construction adds strength and reduces weight. For
reversing action, simply push the reverse button. Available in both SAE and
metric. Imported.
SAE Sizes: 1/4” x 5/16”, 3/8” x 7/16”, 1/2” x 9/16”,
5/8” x 3/4”, 11/16” x 7/8”
______________
Metric Sizes: 5.5mm x 7mm, 6mm x 8mm,
10mm x 11mm, 12mm x 14mm,
15mm x 17mm
ITEM#:
638
638M
DESCRIPTION:
5 PC. RATCHETING BOX WRENCH SET - SAE
5 PC. RATCHETING BOX WRENCH SET - METRIC
CLASS # 52
6 PC. FLEX COMBO WRENCH SETS
These combo wrench sets have 6 wrenches that have standard open ends
on one side and feature a swivel socket on the other. Not only do you get the
same size socket as the open end size, but the socket can swivel from side to
side, making it very useful in confined spaces.
The socket ends are 12 point for sure grip and they are drop forged, heat
treated, machined, triple chrome plated and polished. They come in a handy
roll up pouch and are available in SAE only. Import.
SAE Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”
ITEM#:
637
DESCRIPTION:
6 PC. FLEX COMBO WRENCH
CLASS # 52
FLEX GEAR WRENCH SETS
These flex gear wrenches are constructed of heat treated chrome vanadium steel
with a highly polished mirror finish. The ratcheting box end flexes 180° to allow
the user to attack a fastener at any angle. Available in SAE and metric and each set
comes in a roll up pouch.
SAE Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4”
Metric Sizes: 10mm, 12mm, 13mm, 14mm, 15mm, 17mm & 18mm
ITEM#:
DESCRIPTION:
828
7 PC. FLEX HEAD GEAR WRENCH SET - SAE
828M
7 PC. FLEX HEAD GEAR WRENCH SET - METRIC
CLASS # 52
CROWFOOT WRENCH SETS
Crowfoot wrenches are open end wrench heads that are used with a 3/8”
drive hand ratchet. They’re made to get into hard to reach areas where there
is limited room for turning a nut or bolt. They work excellent with extension
bars attached to the ratchet and when attached are set at a 90° angle.
These 10 piece sets are available in SAE or in metric sizes and come on
a rail type holder. They’re heat treated and triple chrome plated. Imported.
SAE Sizes:
Metric Sizes:
3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
11/16”, 3/4”, 13/16”,
7/8”, 1”
10mm, 11mm, 13mm, 14mm,
15mm, 17mm, 19mm, 21mm,
22mm, 23mm
ITEM#:
801
801M
DESCRIPTION:
10 PC. CROWFOOT WRENCH SET - SAE
10 PC. CROWFOOT WRENCH SET - METRIC
CLASS # 52
STEEL PIPE WRENCH SET
These are drop forged, cast steel pipe wrenches with hardened steel jaws
and precision milled teeth. They have a smooth spinning thumb dial to adjust
the jaw opening.
The handles are electrostatically powder coated and heat cured which is
a harder and more durable finish than standard enamel paint.
This four piece set includes one each of 8”, 10”, 14” and 18”. Import.
ITEM#:
837
DESCRIPTION:
4 PC. STEEL PIPE WRENCH SET
CLASS # 52
ALUMINUM PIPE WRENCHES
Aluminum pipe wrenches are lightweight, easy to handle, and will do the
same job that steel pipe wrenches do, but with half the effort. They are made
from a special alloy called ‘AMT’ (Aluminum, Magnesium, & Titanium).
They feature heavy duty, tempered steel jaws and though these wrenches
are super lightweight, they’re not easily broken or warped even when using a
‘cheater bar’ for better leverage.
Available in individual sizes or in a 3 piece set which includes each of the
following: 14”, 18”, and 24”. Import.
ITEM#:
831
832
833
834
835
836
DESCRIPTION:
3 PC. ALUMINUM PIPE WRENCH (14”, 18”, 24”)
14” ALUMINUM PIPE WRENCH
CLASS # 52
SELF ADJUSTING PIPE WRENCHES
These self adjusting pipe wrenches automatically grip pipes, tie rods, and
suspension rods and will release quickly, a great function in confined areas.
They have CrV jaws and dual color, malleable cast iron bodies and they are
designed with fewer moving parts.
This 4 piece set includes a 10”, 14”, 18” and 24” wrench and they have
maximum effective gripping ranges of 1-5/8” on the 10”, 2” on the 14”, 23/8” on the 18” and 3” on the 24’. Set weighs 15.5 lbs. Import.
ITEM#:
DESCRIPTION:
N831
4 PC. SELF ADJUSTING PIPE WRENCH SET
CLASS # 52
ADJUSTABLE WRENCHES
These heavy duty, adjustable wrenches have a Rockwell hardness of HRC
60 and are triple chrome plated and polished. They close tight and won’t slip
off of the nut or bolt head because the jaws remain parallel even when under
extreme pressure. Import.
Specifications:
Size:
6”
8”
10”
12”
15”
18”
24”
Capacity:
7/8”
1”
1-3/16”
1-3/8”
1-3/4”
2-1/16”
2-1/2”
ITEM#: SIZE:
AW6
6”
AW8
8”
AW10
10”
AW12
12”
AW15
15”
817
18”
818
24”
Weight:
0.4 oz
0.8 oz
1 lb
1.08 lb
2.10 lb
4.11 lb
8.50 lb
DESCRIPTION:
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
ADJUSTABLE WRENCH
CLASS # 52
6 PC. FLARE NUT WRENCH SET
These are also called ‘line wrenches’.
They’re almost a boxed end but opened
slightly so that they can be slipped over
tubing or hoses to get to a nut or fitting.
They hold on better than an open end
wrench and fit exactly like a boxed end
wrench but slip easily over a connected
line.
Made of chrome vanadium, machined
and hardened steel. Imported.
SAE SIZES
•
•
•
•
•
•
1/4” to 5/16”
3/8” to 7/16”
1/2” to 9/16”
5/8” to 11/16”
3/4” to 13/16”
7/8” to 1”
METRIC SIZES
•
•
•
•
•
•
6mm to 8mm
10mm to 12mm
13mm to 14mm
15mm to 17mm
19mm to 21mm
22mm to 24mm
ITEM#:
DESCRIPTION:
802
6 PC. FLARE NUT WRENCH SET - SAE
802M
6 PC. FLARE NUT WRENCH SET - METRIC
CLASS # 52
6 PC. OFFSET WRENCH SET
These wrenches have 12 point boxed
ends on both sides that are offset 90° to
easily access tight places.
The angle allows the handle to sit up
higher turning freely above an obstacle
that would otherwise be in the way.
They’re drop forged, machined, heat
treated and polished and come in a roll
up canvas and vinyl pouch. Imported.
SAE SIZES
•
•
•
•
•
•
3/8” to 7/16”
1/2” to 9/16”
5/8” to 11/16”
3/4” to 25/32”
13/16” to 7/8”
15/16” to 1”
METRIC SIZES
•
•
•
•
•
•
10mm to 11mm
12mm to 13mm
14mm to 15mm
16mm to 17mm
18mm to 19mm
20mm to 22mm
ITEM#:
DESCRIPTION:
805
6 PC. OFFSET BOX END WRENCH SET - SAE
805M
6 PC. OFFSET BOX END WRENCH SET - METRIC
CLASS # 52
7 PC. PRO GEAR WRENCH SET
Gear wrenches are box & open wrenches with a thin, heavy duty ratchet
system built into the boxed end side of the wrench. This allows for the quick
movement of a 5° rotation over and over until the nut or bolt is off. They are
also very handy in tight spaces.
These wrenches are made of chrome vanadium steel that is drop forged,
heat treated, and polished to a mirror finish. Imported.
SAE Sizes:
3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
11/16” & 3/4”
Metric Sizes:
8mm, 10mm, 12mm, 13mm,
14mm, 15mm & 18mm
ITEM#:
DESCRIPTION:
825
7 PC. PRO GEAR WRENCH SET - SAE
825M
7 PC. PRO GEAR WRENCH SET - METRIC
CLASS # 52
BOX & OPEN END WRENCHES
INDIVIDUAL SIZES
These individual sized box and open end wrenches are made from drop
forged A36 steel that is heat treated, precision ground and then triple chrome
plated and polished for a great look and feel.
They have raised panels for extra strength and are available in all sizes
in metric from 6mm to 65mm or SAE from 1/4” to 2-1/2”. Imported.
Metric Wrench Sizes:
ITEM#:
OB6
OB7
OB8
OB9
OB10
OB11
OB12M
OB13
SIZE:
6 mm
7 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
SAE Wrench Sizes:
ITEM#:
OB14
OB516
OB38
OB716
OB12
OB916
OB58
OB1116
Sizes continue on next page
SIZE:
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
Metric Wrench Sizes:
OB14M
OB15
OB16
OB17
OB18
OB19
OB20
OB21
OB22
OB23
OB24
OB25
OB26
OB27
OB28
OB29
OB30
OB31
OB32
OB33
OB34M
OB35
OB36
OB38M
OB40
OB41
OB42
OB44
OB45
OB46
OB48
OB50
OB55
OB57
OB60
OB65
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
20 mm
21 mm
22 mm
23 mm
24 mm
25 mm
26 mm
27 mm
28 mm
29 mm
30 mm
31 mm
32 mm
33 mm
34 mm
35 mm
36 mm
38 mm
40 mm
41 mm
42 mm
44 mm
45 mm
46 mm
48 mm
50 mm
55 mm
57 mm
60 mm
65 mm
SAE Wrench Sizes:
OB34
OB1316
OB78
OB1516
OB1
OB1&116
OB1&18
OB1&316
OB1&14
OB1&516
OB1&38
OB1&716
OB1&12
OB1&58
OB1&1116
OB1&34
OB1&1316
OB1&78
OB2
OB2&18
OB2&14
OB2&38
OB2&12
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
2”
2-1/8”
2-1/4”
2-3/8”
2-1/2”
CLASS # 52
JUMBO CROWFOOT WRENCHES
Crowfoot wrenches help to speed up installation of hard to reach fasteners
and work where no conventional socket can. They snap onto any 1/2” drive
ratchet and operate just like a socket but with the configuration of an open
end wrench. Each wrench features the size clearly imprinted on it.
These sets are 1/2” drive, available in SAE and Metric and made of black
oxide coated, chrome vanadium steel. Each set comes in a heavy duty, blow
mold carrying case. Ratchet not included. Import.
14 PC. SAE CROWFOOT
WRENCH SET
Sizes:
1-1/16", 1-1/8", 1-3/16", 1-1/4",
1-5/16", 1-3/8", 1-7/16", 1-1/2",
1-5/8", 1-11/16", 1-3/4", 1-13/16",
1-7/8"& 2"
14 PC. METRIC CROWFOOT
WRENCH SET
Sizes:
27mm, 29mm, 30mm, 32mm,
33mm, 34mm, 35mm, 36mm,
38mm, 41mm, 43mm, 46mm,
48mm & 50mm.
ITEM#:
DESCRIPTION:
N803
JUMBO CROWFOOT WRENCH SET - SAE
N803M JUMBO CROWFOOT WRENCH SET - METRIC
CLASS # 52
5 PC. BLACK CR-V ADJUSTABLE
WRENCH SET
This is a top quality, Chrome Vanadium Steel, adjustable wrench set with
the black oxide, industrial finish. The finish on this set will prevent chipping
and flaking and resists rust and corrosion.
The hardened steel jaws provide greater strength and they are tapered to
allow easy access in tight work areas. They have easy to read measurements
in SAE on one side and Metric on the other with an alignment arrow on the
sliding jaw to make adjusting to the correct size of the nut or bolt very easy.
This is a really nice 5 wrench set that anyone would be proud to have in
their shop, truck or toolbox. Includes one each of 4”, 6”, 8”, 10” and 12” and
stores in a heavy duty canvas pouch.
ITEM#:
N158
DESCRIPTION:
5 PC. BLACK CRV ADJUSTABLE WRENCH SET
CLASS # 52
BLACK CR-V ADJUSTABLE WRENCHES
These are top quality, Chrome Vanadium Steel, adjustable wrenches with
These are really nice, heavy duty, individual wrenches that anyone would
be proud to have in their shop, truck or toolbox.
ITEM#:
N159
N160
N161
DESCRIPTION:
15” BLACK CRV ADJUSTABLE WRENCH SET
CLASS # 52
8 PC. BLACK CR-V ADJUSTABLE
WRENCH SET
This is a top quality, Chrome Vanadium Steel, adjustable wrench set with
This is a really nice 8 wrench set that anyone would be proud to have in
their shop, truck or toolbox. Includes one each of 4”, 6”, 8”, 10”, 12”, 15”,
18”, and 24”.
ITEM#:
N162
DESCRIPTION:
8 PC. BLACK CRV ADJUSTABLE WRENCH SET
CLASS # 52
ADJUSTABLE FAS-WRENCHES
This remarkable tool works like a ratchet wrench but with the features of
an adjustable wrench. No more lifting the wrench from the bolt to tighten or
loosen after each movement, simply adjust the jaws to fit and tighten like a
ratchet.
They are made of chrome vanadium steel with a matt finish and have a
rubberized, anti-slip handle which ensures a comfortable grip. They read in
inches on one side of the wrench head and in metric on the other. Available
in 8” and 10”. Import.
ITEM#:
N174
N175
DESCRIPTION:
8” ADJUSTABLE FAS-WRENCH
10” ADJUSTABLE FAS-WRENCH
CLASS # 52
10 PC. JUMBO SAE WRENCH SET
The wrenches in this monster, 10 piece set are between 18” to 24” long
with a capacity from 1-5/16” to 2” between the 10 wrenches. They are made
extra long for maximum grip and leverage.
They have a 12 point box end on one side and the open end on the other
and are made tough from chrome vanadium steel with the black oxide finish
and raised panels along the sides for extra strength. They are corrosion proof
and rust resistant and come with a roll up, vinyl and canvas, hang up pouch.
Sizes:
1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”,
1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”,
1-7/8” & 2”
Imported
ITEM#:
N10PCB
DESCRIPTION:
10 PC. JUMBO COMBO WRENCH SET
CLASS # 52
These are ‘Neiko Tools’, ‘raised panel’ wrenches that are case hardened
from pure alloyed steel, and drop forged in a unique two step process. They
have a black oxide finish for longer durability and corrosion resistance, and
because they are so tough, they carry a Lifetime Guarantee. Imported.
ITEM#: N16PC - 16 PC. SAE SET
ITEM#: N16PCM - 16 PC. METRIC
Sizes:

1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
Sizes:

3/4”
3/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-1/4”

6 mm
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm

15 mm
17 mm
19 mm
21 mm
24 mm
27 mm
30 mm
32 mm
Vinyl carrying pouch included.
ITEM#:
N16PC
N16PCM
DESCRIPTION:
16 PC. COMBO WRENCH SET - SAE
16 PC. COMBO WRENCH SET - METRIC
CLASS # 52
4 PC. ADJUSTABLE WRENCHES
W/ COMFORT GRIP
These Adjustable wrenches are manufactured to precision standards. The
jaws remain tight no matter how far you open them which prevents slipping
as well as scraped and banged knuckles.
The 6” wrench opens to 3/4” and the largest, the 12” wrench, opens to a
maximum 1-3/8” and they feature soft grip, coated handles for comfort. The
jaws are nickel plated to prevent rust and corrosion and a millimeter scale is
imprinted on the jaw opening for accuracy.
This set includes one each of 6”, 8”, 10” and 12” and comes in a handy
rollup, vinyl pouch. Imported.
ITEM#:
N4PCA
DESCRIPTION:
4 PC. COMFORT GRIP WRENCH SET
CLASS # 52
JUMBO GEAR WRENCHES
These gear wrenches are box & open wrenches with a thin, but heavy duty
ratcheting system built into the box end side of the wrench. The gears are 72
tooth precision cut cogs that allow for a quick movement of 5° rotations over
and over until the nut or bolt is off.
They can be used just like regular wrenches but where space is limited and
a turning radius is restricted, the gear end is extremely convenient. Imported.
SAE Sizes: 13/16”, 15/16", 7/8" & 1"
Metric Sizes: 21mm, 22mm, 24mm & 25mm
ITEM#:
DESCRIPTION:
N829
4 PC. JUMBO GEAR WRENCH SET - SAE
N829M 4 PC. JUMBO GEAR WRENCH SET - METRIC
CLASS # 52
DUOMETRIC GEAR WRENCH SETS
These gear wrenches are made of chrome vanadium steel drop forged,
hardened, tempered and then mirror polished with a black nickel finish. The
box end features a 72 teeth gear with ratcheting action and they fit both SAE
and metric sizes.
These sets are beautifully placed in an aluminum carrying case with a
hard foam interior and the sizes for each wrench are boldly marked on both
the carrying case insert and the wrench itself.
12 PC. DUOMETRIC GEAR WRENCH
SET
12 piece set covers 19 sizes: 8mm (5/16”),
3/8”, 10mm (25/64”), 11mm (7/16”),
12mm (15/32”), 13mm, 1/2”, 9/16”,
15mm (19/32”), 16mm (5/8”), 11/16”, &
19mm (3/4”)
ITEM#: DM12PC
13 PC. DUOMETRIC GEAR WRENCH
SET - STUBBY
This set is stubby length for
hard to reach places.
13 piece set covers 20 sizes: 8mm (5/16”),
3/8”, 10mm (25/64”), 11mm (7/16”),
12mm (15/32”), 13mm, 1/2”, 9/16”,
15mm (19/32”), 16mm (5/8”), 11/16”,
18mm & 19mm (3/4”)
ITEM#: DM13PC
CLASS # 52
LONG REACH WRENCH SET
The wrenches in these box and open end sets are just a couple of inches
longer than the average combination wrench, so you get the advantages of a
longer reach and more leverage to get the job done the first time.
They’re beautifully polished, triple chrome plated, and heat treated and
they also have the raised panels for extra strength. They come with a heavy
duty roll up pouch with grommets for hanging if needed. IMPORTED
14 PC. SAE LONG REACH SET
ITEM#: N39
16 PC. METRIC LONG REACH SET
ITEM#: N39M
3/8” - 7/16” - 1/2” - 9/16” - 5/8” - 11/16”
3/4” - 13/16” - 7/8” - 15/16” - 1” - 1 1/16”
1 1/8” - 1 1/4”
10mm - 11mm - 12mm - 13mm - 14mm
15mm - 17mm - 18mm - 19mm - 20mm
21mm - 23mm - 25mm - 28mm - 30mm
32mm
ITEM#:
DESCRIPTION:
N39
14 PC. LONG REACH WRENCH SET - SAE
N39M 16 PC. LONG REACH WRENCH SET - METRIC
CLASS # 52
OFFSET ALUMINUM PIPE WRENCHES
Made with a special alloy called ‘A.M.T.’ (Aluminum, Magnesium, &
Titanium, these pipe wrenches will do everything a steel pipe wrench will do
and more. Because they’re lighter in weight, however, user fatigue is greatly
reduced.
These wrenches have the same quality and specs as standard aluminum
pipe wrenches but the steel heads are offset to a 20° angle allowing the user
to reach into tighter areas including right up next to walls.
They are available individually in 14” and 18” or as a 3 piece set which
includes a 14”, an 18” and the large 24”. (24” wrench is not sold separately.)
ITEM#:
140S
180S
DESCRIPTION:
14” OFFSET ALUMINUM PIPE WRENCH
18” OFFSET ALUMINUM PIPE WRENCH
N3PC-AO
3 PC. OFFSET ALUMINUM PIPE WRENCH SET
CLASS # 52
SOFT GRIP WRENCH SETS
These box and open end wrench sets consist of tool tempered steel cores
that have been heat treated and triple chrome plated to a mirror finish. They
are then form fitted with a bright red, comfort grip sleeve onto the full length
of the handle to provide a cushion that absorbs shock.
The grips are also a non slip material that will prevent the wrench from
slipping if it becomes greasy or oily, and they wipe perfectly clean! The size
of each wrench is also printed clearly on each handle and the set comes in a
sturdy canvas, roll up pouch with grommets for hanging. Imported.
11 PC. SOFT GRIP SET- SAE
14 PC. SOFT GRIP SET - METRIC
Sizes:
Sizes:
1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16’,
5/8”, 11/16”, 3/4”, 13/16, & 7/8”
6mm, 7mm, 8mm, 9mm, 10mm, 11mm,
12mm, 13mm, 14mm, 15mm, 16mm,
17mm, 18mm & 19mm
ITEM#: N11PC
ITEM#: N14PCM
5 PC. SOFT GRIP SET - SAE
JUMBO
8 PC. SOFT GRIP SET - METRIC
JUMBO
Sizes:
Sizes:
15/16”, 1”, 1-1/16”, 1-1/8”, & 1-1/4”
20mm, 21mm, 23mm, 24mm, 27mm,
29mm, 30mm & 32mm
ITEM#: N5PC
ITEM#: N8PCM
CLASS # 52
‘NEIKO PRO’ TORQUE WRENCHES
These torque wrenches can take a beating and will read accurately every
time. They are the ‘click’ type with the twist dial at the bottom of the wrench
and have the soft grip handles.
To operate, simply dial in the torque setting you want, tighten the bolt or
nut, and when desired torque level is reached the wrench will ‘click’, letting
you know you have achieved the correct tightness.
These wrenches are rugged, professional, and precision machined for all
high tech applications. IMPORTED
1/4” Dr. Torque Wrench
Range: 40 – 250 Inch Lbs
Grade: 1 In/Lb
Length: 12”
Range: 15 – 80 Foot Lbs
Grade: .5 Ft/Lb
Length: 15”
Grade: 1 Ft/Lb
Length: 25.5”
Grade: 1 Ft/Lb
Length: 34”
ITEM#:
N114
N115
N116
N117
DESCRIPTION:
1/4” TORQUE WRENCH - NEIKO
CLASS # 52
OCTA-METRIC COMBO WRENCHES
These amazing wrenches eliminate the need for several different types of
other wrenches by combining 6 point SAE and 6 point metric, 12 point SAE
and 12 point metric, spline drive, ‘E’-torque, and square drive into one multi
fit boxed wrench. Will also easily remove nuts and bolts up to 30% damaged
and worn.
Made of chrome vanadium steel and polished to a silver satin finish. This
11 piece set ranges from 8mm to 19mm or 5/16” to 3/4”. Comes in a handy
plastic holder with handle and conforms to ASME B 107-100.2002. Import.
ITEM#:
NOM11
DESCRIPTION:
11 PIECE OCTA-METRIC WRENCH SET
CLASS # 52
RATCHET CHAIN WRENCHES
These ratcheting chain wrenches feature a high carbon drop forged steel
ratcheting mechanism that can grab and turn objects as small as 1/2" up to as
large as a 5" outside diameter on the 12” wrench and 6-1/2” outside diameter
on the 20” wrench. The longer handle on the 20” wrench will give you more
leverage.
They’re simple to use by wrapping the chain around any object and after
a turn, just back the tool up in the opposite direction and it will grab again in
a new position, without removing it from the object.
Works easily on various shaped objects, such as square, round, hexagon,
octagon, oval, and many irregular shapes and they work especially well with
water pipes, filters and holding pulleys.
The handles are made from drop forged, heat treated, alloy steel and the
chain length is 19-1/2" on the 12” wrench and 24-1/2” on the 20”. Both have
a cushioned grip for better grasp and less hand fatigue. Imported.
ITEM#:
N141
N142
DESCRIPTION:
20” RATCHETING CHAIN WRENCH
12” RATCHETING CHAIN WRENCH
CLASS # 52
STUBBY WRENCHES
These stubby wrenches are only 4” to 5” and fit right in the palm of your
hand. They’re boxed on one end and open on the other and made short to fit
into very tight spots while still allowing good leverage.
They’re drop forged, machined, heat treated and triple chrome plated and
are held to tight tolerances so they fit a nut or bolt snuggly without slipping.
SAE Sizes:
7/16”, 1/2”, 9/16”, 5/8”, 11/16”,
3/4”, 15/16” & 1”
Metric Sizes:
8mm, 10mm, 12mm, 14mm, 15mm,
16mm, 17mm & 19mm
ITEM#:
DESCRIPTION:
804
8 PC. STUBBY WRENCH SET - SAE
804M
8 PC. STUBBY WRENCH SET - METRIC
CLASS # 52
STUBBY GEAR WRENCH SET
Gear wrenches are box & open wrenches with a thin, heavy duty ratchet
system built into the boxed end side of the wrench. This allows for the quick
movement of a 5° rotation over and over until the nut or bolt is off.
Because of their stubby length, these wrenches are real easy to get into a
tight spot and fit right in the palm of your hand for a much more comfortable
grip and better leverage than longer wrenches.
These wrenches are made of chrome vanadium steel that is drop forged,
heat treated, and polished to a mirror finish. Imported.
Specifications:
7 PC. SAE Sizes:
3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”
& 3/4”
10 PC. Metric Sizes:
10mm, 11mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm,
18mm, & 19mm
Includes roll-up, canvas pouch
ITEM#:
DESCRIPTION:
826
7 PC. STUBBY GEAR WRENCH SET – SAE
827
10 PC. STUBBY GEAR WRENCH SET – METRIC