Spare parts catalogue with prices

Transcription

0091.000_G
Spare parts catalogue
with prices
TUNZE Aquarientechnik GmbH
Seeshaupter Strasse 68
D-82377 Penzberg - Germany
Tel.: +49 (8856) 2022 - Fax.: +49 (8856) 2021
www.tunze.com
TUNZE UK
5, Apsley Way
Worthing / West Sussex BN13 3RE
Tel.: +44 (1273) 700460 - Fax.: +44 (1273) 701691
www.tunze.com
£
Nominal
charge
£ 1.80
02/2010
Content
Designation
Page
Spare parts illustrations _______________________________________________ 3 - 26
Turbelle ® powerhead / electronic __________________________________________ 3
Turbelle ® Maintenance instructions _______________________________________ 4 - 5
Turbelle ® electronic
< 2000 ____________________________________________ 6
Turbelle ® Maintenance instructions
Turbelle ® stream
< 2000 _______________________________ 7 - 9
old model ___________________________________________ 10
Wavebox _____________________________________________________________ 11
Turbelle ® nanostream® / stream _________________________________________ 12
Turbelle ® classic 2002 / 4002 ____________________________________________ 13
Comline Filter _________________________________________________________ 14
Comline DOC Skimmer _________________________________________________ 15
Classic DOC Skimmer __________________________________________________ 16
Nano DOC Skimmer / Nano cleaner / Nano pump ____________________________ 17
Automatic skimmer
< 2004 _________________________________________ 18 - 19
Comline Automatic skimmer
<2004 __________________________________ 20-21
Comline Calcium Automat ______________________________________________ 22
Osmolator Universal ____________________________________________________ 22
Turbelle ® stream II > 2008 ______________________________________________ 23
TUNZE SYSTEM ____________________________________________________ 24-25
Kogapur______________________________________________________________ 26
Total price list ______________________________________________________ 27- 32
2
powerhead / electronic
for all Turbelle® electronic > 2000
3
Wartungsanleitung • Maintenance Instructions • Notice d’entretien
powerhead 600/2, 1000/2, 1600/2, 3000/2, 800/2, 1200/2, 220.04, 230.04, 3115.04
electronic 7200/2, 7300/2, 7400/2, 7100/2,240.04
Das Zerlegen wird anhand einer Turbelle ® 3000/2 gezeigt. Da alle powerhead den gleichen Aufbau besitzen gilt sie für alle Turbellen
Zerlegen der Pumpe (siehe Bild 1 - 3)
Bild 1 Gehäuseklammern (1), falls vorhanden, mit kräftigem Daumendruck nach außen von Motor- und Kreiselgehäuserand abdrücken.
Bild 2 Kreiselgehäuse (1) im Uhrzeigersinn bis Haltenase (3) drehen, dann vom Motorblock (2) nach unten abnehmen.
Bild 3 Antriebseinheit (1) mit Kreisel (2) im Uhrzeigersinn drehend herausziehen.
Vorsicht Bruchgefahr! Keramik-Magnetrotor ist stoß- und bruchempfindlich und zieht durch seine Magnetwirkung nach innen =
Schnapp-Effekt. Deshalb behutsam herausnehmen.
Zerlegen der Antriebseinheit (siehe Bild 4 -7)
Bild 4 Verriegelungsfeder (1) der Antriebswelle (2) zusammendrücken und gleichzeitig Kreisel (3) anheben und entnehmen. Im Normalfall
genügt ein mehrmaliges Durchspülen unter dem Wasserhahn.
Nur im Reparaturfall (sichtbare Verschleißschäden) auseinander nehmen!
Bild 5 Im Reparaturfall Antriebseinheit zerlegen, dazu Magnetrotor (1) festhalten und Antriebswelle (2) gegen Uhrzeigersinn drehen über
den Widerstand des Rastpunktes, dabei schieben sich die Bremsbacken (4) seitlich aus dem Gehäuse und können so von Hand
herausgezogen werden. Lagerring (3) bei Bedarf mit dem Fingernagel vom Gehäuse der Antriebswelle (2) abziehen.
Bild 6 Inneres Rotorlager (1) im Reparaturfall am besten mit einer Holzschraube 4,5x60mm (2) oder einem Drahthaken herausziehen.
Bild 7 Lagerbuchse (3) im Reparaturfall mit Schraubendreherklinge aushebeln.
Kontrollieren Sie alle Teile auf evtl. Verschleißerscheinungen. Der Austausch eines Teiles für ein paar Mark, kann einen größeren Schaden
an Ihrer Turbelle ® verhindern. Der Zusammenbau erfolgt, soweit nicht anders vermerkt sinngemäß in umgekehrter Reihenfolge.
The disassembly will be demonstrated by means of a Turbelle® 3000.
As all Turbelle® powerhead units have the same construction, these maintenance instructions shall be applicable for all Turbelle®
Dismantling the pump (cf. Figs 1 – 3)
Fig. 1 Press the housing clamps, if fitted, away from motor and housing edge with strong pressure of your thumbs.
Fig. 2 Turn impeller housing clockwise to retaining nose (3), then remove motor block (2) downwards.
Fig. 3 Draw out drive unit (1) with impeller (2) clockwise.
Caution: Danger of breakage ! Ceramic magnetic rotor is sensitive to blows and breakage and through its magnet effect pulls
inwards = snap effect. Therefore, remove carefully.
Dismantling the drive unit (cf. Figs. 4 – 7)
Fig. 4 Press together locking spring (1) of the drive shaft (2) and lift the impeller (3) at the same time. Normally rinsing a few times under
the tap is sufficient.
Dismantle only in the case of repair (visible signs of wear).
Fig. 5 In the case of repair dismantle drive unit: to this end hold magnetic rotor (1) tight and turn drive shaft (2) anticlockwise through the
resistance of the latching point, at the same time the brake shoes (4) slide out of the side of the housing and may be removed by hand. As
and when necessary draw off bearing ring (3) from the housing of the drive shaft (2) with your finger nail.
Fig. 6 Using a wood screw 4.5 x 60 mm (2) or a wire hook, draw out inner rotor bearing (1) in the case of a repair.
Fig. 7 Lift out bearing bush (3) with screwdriver blade in case of repair.
Check all parts for any wear. The replacement of an inexpensive part may prevent a larger damage on your Turbelle ®.If nothing to the
contrary has been indicated, the assembly is carried out in reverse sequence.
Cette opération de démontage est simulée avec une Turbelle 3000. Etant donné que la conception de toutes les pompes Turbelle Powerhead
est similaire, ces indications comptent pour toutes les Turbelle®
Démontage de la pompe (voir vues 1 à 3)
Vue 1 S’ils sont utilisés, détachez les clips de verrouillage (1) par une forte pression des doigts sur les ergots et vers l’extérieur de la chambre
de turbine.
Vue 2 Tournez la chambre de turbine (1) dans le sens horaire jusqu’à l’ergot de maintien (3) puis séparez-là du bloc-moteur (2).
Vue 3 Extrayez l’ensemble mobile (1) et sa turbine (2) en effectuant une légère rotation dans le sens horaire.
Attention, risques de bris ! Le magnéto-rotor en céramique est sensible aux chocs. Sa puissance magnétique développe une forte
attraction vers le bloc-moteur et implique une extraction avec précaution.
Démontage de la partie mobile (voir vues 4 à 7)
Vue 4 En règle générale, un rinçage minutieux à l’eau courante est suffisant. Ne séparez les pièces qu’en cas de nécessité absolue de
réparation (traces d’usure nettement visibles) !
Si nécessaire, appuyez la lame de verrouillage (1) située sur l’arbre d’entraînement (2) tout en saisissant et en détachant la turbine (3).
Vue 5 Si nécessaire, le démontez la partie mobile. Pour cela, maintenez le magnéto-rotor (1) et tournez l’arbre d’entraînement (2) dans
le sens anti-horaire au-delà de son point de résistance : les mâchoires de freinage (4) se présentent hors de leur logement et peuvent en
être extraites. Si nécessaire, détachez le palier (3) du logement de l’arbre d’entraînement (2) à l’aide de l’ongle.
Vue 6 Si nécessaire, extrayez le palier de rotor intérieur (1) par une rotation à l’aide d’une vis à bois de 4,5 X 60 mm (2) ou à l’aide d’une
vrille.
Vue 7 Si nécessaire, démontez le palier principal (3) à l’aide d’un petit tournevis.
Contrôlez attentivement chaque pièce, son degré d’usure et d’encrassement. Pour une somme modique, l’échange éventuel d’une pièce
peut éviter la destruction de votre Turbelle ®. Le remontage de la pompe obéit tout simplement à l’ordre inverse au démontage.
4
Zerlegen der Pumpe • Dismantling the pump • Démontage de la pompe
Zerlegen der Antriebseinheit • Dismantling the drive unit • Démontage de la partie mobile
3000.07
5
powerhead / electronic < 07/2000
240.01
7240.01
7410.12
Turbelle ® powerhead
602
602.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
602.12
700.13
603
602.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
602.12
700.13
3000.78
1002
1002.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1002.12
1500.13
1002.15
3000.78
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
1001.77
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
1003
1002.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1002.12
1500.13
1002.15
1500
1500.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1500.12
1500.13
1501
1500.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1500.12
1500.13
3000
3000.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
3000.12
3000.13
3000.78
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
3001
3000.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
3000.12
3000.13
1200
1200.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
1201.13
1201
1200.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
1201.03
235.02
235.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
235.13
3000.78
1200.15 1200.15
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
802
802.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
1201.13
1200.15
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
Teileliste
803
233.02 Turbelle® powerhead
802.01 233.01 Motorblock 230V-50Hz
3000.02 3000.02 O-Ring
3000.03 3000.03 Kühlkanal
3000.04 3000.04 Lager oben
3000.05 3000.05 Magnetrotor
3000.07 3000.07 Antriebswelle
3000.08 3000.08 Bremsbacken 2 Stück
3000.30 3000.30 SET (3000.07 + 3000.08)
3000.09 3000.09 Lagerschale mit Bremsring
3 0 0 0 . 0 9 2 3 0 0 0 . 0 9 2 Bremsring
3000.10 3000.10 Lagerbuchse V4A
3000.40 3000.40 SET (3000.09 + 3000.10)
3000.11 3000.11 Klemmring
233.12 233.12 Kreisel
1201.03 233.13 Kreiselgehäuse
Adapter
Rohrmuffe
1200.15
Muffe für Schlauchanschluß
Schlitzkörper
Halter
Saughalter mit 3060.42
Sauger 3 Stück
SET (3060.40 + 3060.41)
Rahmenhalterung.
Stömungswinkel
Partslist
Turbelle® powerhead
Engine block 230V-50Hz
O-ring
Coolling duct
Upper bearing
Magnetic rotor
Drive shaft
Breakshoes 2 pcs.
SET (3000.07 + 3000.08)
Breakshell with break ring
Breaik ring
Bearingbush V4A
SET (3000.09 + 3000.10)
Clampring
Impeller
Impeller housing
Adaptor
Connecting sleeve
Sleeve for hose connection
Strainer
Holder
Suction holder with 3060.42
Suction 3 pcs.
SET (3060.40 + 3060.41)
Frame holding device
Folow deflector
Liste de piéce de rec
Turbelle® powerhead
Bloc moteur 230V- 50Hz
bague torique
canal de refroidissement
Palier Supérier
Induit magnétique
Arbremenant
Mâchoires 2 piéc.
SET (3000.07 + 3000.08)
Coquille de coussinet de frein.
Anneau au freiner
Coussinet V4A
SET (3000.09 + 3000.10)
Bague de serrage
Rotor
Carter du rotor
Ajutage
Manchon de tuyau
Manchon pour raccord tuyau
Tube fendu
Fixation
Support a vent. avec 3060.42
Support 3 piéc.
SET (3060.40 + 3060.41)
Fixation du cadre
Cône d’ecoulement
Turbelle ® electronic
7240
7241
7180
7181
240.02
7240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
7410.12
7240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
7410.12
3000.13
7180.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
7410.12
1201.13
3000.13
1200.15
1282.15
240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
3000.13
7180.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
7410.12
1201.13
3000.13
1200.15
1282.15
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
6
235.13
Turbelle ® electronic Pumpe
Motorblock 24V
O-Ring
Kühlkanal
Lager oben
Magnetrotor
Antriebswelle
Bremsbacken 2 Stück
SET (3000.07 + 3000.08)
Lagerschale mit Bremsring
Bremsring
Lagerbuchse V4A
SET (3000.09 + 3000.10)
Klemmring
Kreisel
Kreisel
Kreiselgehäuse
Kreiselgehäuse
Muffe ø 25mm für 1201.13
Muffe ø 25mm für 1282.13
Muffe
Schlitzkörper
Halter
Saughalter
Sauger 3 Stück
SET (3060.40 + 3060.41)
Rahmenhalterung
Stömungswinkel
Turbelle ® electronic pump
Motor block 24V
O-ring seal
Cooling duct
Upper bearing
Magnetic rotor
Drive shaft
Brake shoes (2 items)
SET (3000.07 + 3000.08)
Bearing shell with brake ring
Brake ring
Bearing bush V4A
SET (3000.09 + 3000.10)
Clamping ring
Impeller
Impeller
Impeller housing
Impeller housing
Sleeve ø25mm 1201.13
Sleeve ø25mm 1282.13
Sleeve
Strainer
Holding device
Suction cup unit
Suction cup (3 pcs.)
SET (3060.40 + 3060.41)
Frame holding device
Flow deflector
Turbelle ® electronic pompe
Bloc moteur 24V
Bague torique
Canal de refroidissement
Palier supérieur
Induit magnétique
Arbre d'entraînement
Mâchoires (2 piéces)
SET (3000.07 + 3000.08)
Coquille de coussinet a. baague de r.
Anneau au freiner
Coussinet V4A
SET (3000.09 + 3000.10)
Bague de serrage
Rotor
Rotor
Carter du rotor
Carter du rotor
Manchon ø25mm pour 1201.13
Manchon ø25mm pour 1282.13
Manchon
Tube fendu
Fixation
Support à ventouses
Ventouses (3 pièces)
SET (3060.40 + 3060.41)
Fixation du cadre
Cône d’ecoulement
Wartungsanleitung • Maintenance Instructions • Notice d’entretien
powerhead 602/603, 1002/1003, 1500/1501, 3000/3001, 802/803, 1200/1201, 233.02, 235.02
electronic 7210P/7211P, 7310P/7311P, 7410P/7411P, 7110U/7111U,240.02
Das Zerlegen wird anhand einer Turbelle ® 3000 gezeigt. Da alle powerhead den
gleichen Aufbau besitzen gilt sie für alle Turbelle®
The disassembly will be demonstrated by means of a Turbelle® 3000.
As all Turbelle® powerhead units have the same construction, these maintenance
instructions shall be applicable for all Turbelle®
Cette opération de démontage est simulée avec une Turbelle 3000. Etant donné
que la conception de toutes les pompes Turbelle Powerhead est similaire, ces
indications comptent pour toutes les Turbelle®
Drehen Sie das Kreiselgehäuse soweit gegen den Uhrzeigersinn, bis es sich nach
unten abziehen läßt.
Turn the impeller housing clockwise until it can be pulled off to the bottom.
Tournez la chambre de turbine en sens anti-horaire jusqu’à son détachement de
la pompe.
Nehmen Sie das Kreiselgehäuse vom Pumpenkopf ab.
Remove the impeller housing from the pump head.
Déposez la chambre de turbine.
Drücken Sie die Verriegelungsfeder der Antriebswelle (3000.07) zusammen, und
hebeln Sie den Kreisel ab (Schraubenzieher).
Press the locking spring of the drive shaft (3000.07) together and lift the impeller
off (screw-driver).
Appuyez sur la lame de ressort se situant sur l’arbre d’entraînement (3000.07) et
détachez la turbine en faisant levier avec un petit tournevis.
3000.07
7
Drücken Sie den Klemmring (3000.11) zusammen, und entnehmen Sie ihn aus
seiner Führung.
Press the clamping ring (3000.11) together and remove it from its guideway.
3000.05
Pincez la bague de serrage (3000.11) de manière à pouvoir l’extraire de son
logement.
Ziehen sie die Antriebswelle (3000.07) und Lagerschale (3000.09) aus dem
Pumpenkopf. Achten Sie beim Wiedereinsetzten auf die richtige Position der
Rastnut.
3000.09
3000.07
Pull the drive shaft (3000.07) and the bearing shell (3000.09) out of the pump head.
In assembly, please observe the right position of the snap-in groove.
Tirez l’arbre d’entraînement (3000.07) de manière à sortir l’arbre et l’ensemble
coquille de freinage (3000.09) de la pompe. Lors de la mise en place, veillez à bien
positionner le téton détromper.
Ziehen Sie die Antriebswelle (3000.07) aus der Lagerschale (3000.09).
Pull the drive shaft (3000.07) out of the bearing shell (3000.09).
09
3000.
7
3000.0
Séparez l’arbre d’entraînement (3000.07) de la coquille de freinage (3000.09).
3000.08
Bremsbacken (3000.08) an der schmalen Seite nach außen ziehen und entnehmen (oben). Zum Einsetzen die Bremsbacken mit der breiten Seite einhängen, und
die schmale nach innen einrasten (unten).
Pull the brake shoe (3000.08) to the outside at the narrow part, and remove it
(upwards). For assembly, attach the brake shoe on the broad side and permit the
narrow part to snap in (bottom).
En les saisissant sur leurs parties les plus fines, sortez les mâchoires de freins
(3000.08) (en haut). Pour la remise en place des mâchoires, enclipsez tout d’abord
la partie large puis introduisez la partie la plus fine (en bas).
8
Den Bremsring (3000.092) nur wenn Schäden erkennbar sind, aus der Lagerschale
(3000.09) herausziehen.
3000.09
30
00
.0
92
Pull the brake ring (3000.092) out of the bearing shell (3000.09) only, if damage is
visible.
Seulement s’il possible de constater une détérioration, sortez la garniture de
freinage (3000.092) de la coquille de freinage (3000.09).
Hebeln Sie den Kühlkanal (3000.03) aus dem Pumpenkopf. Ziehen Sie den
Magnetrotor mittels des Kühlkanales vollständig aus seiner Führung.
Prize off the cooling duct (3000.03) from the pump head. Use the cooling duct to
pull the magnetic rotor out of the guideway completely.
3000.03
A l’aide d’un tournevis, extrayez le canal de refroidissement (3000.03) de la pompe.
Saisissez le rotor poussé par la translation du canal.
Nehmen Sie den Magnetrotor (3000.05) vom Kühlkanal (3000.03) und ziehen Sie das
obere Lager (3000.04) aus der Führung.
3000.05
Remove the magnetic rotor (3000.05) from the cooling duct (3000.03), and pull the
upper bearing (3000.04) from the guideway.
3000.04
Déposez le rotor (3000.05) de son canal de refroidissement (3000.03) et sortez le
palier supérieur (3000.04) de son logement.
3000.03
Kontrollieren Sie alle Teile auf evtl. Verschleißerscheinungen. Der Austausch eines
Teiles für ein paar Mark, kann einen größeren Schaden an Ihrer Turbelle ® verhindern.
Der Zusammenbau erfolgt, soweit nicht anders vermerkt sinngemäß in umgekehrter
Reihenfolge.
Check all parts for any wear. The replacement of an inexpensive part may prevent
a larger damage on your Turbelle ®.If nothing to the contrary has been indicated,
the assembly is carried out in reverse sequence.
Contrôlez attentivement chaque pièce, son degré d’usure et d’encrassement. Pour
une somme modique, l’échange éventuel d’une pièce peut éviter la destruction de
votre Turbelle ®. Le remontage de la pompe obéit tout simplement à l’ordre inverse
au démontage.
9
10
stream
old model
11
Wavebox 6212
nanostream®
stream
Turbelle® stream
6200
7240.27
1
2
3
6060
6060
6080
6080
6000
6100.10
7240.27
7210.202
6100
6100.10
7240.27
7410.602
6200
6200.10
7240.27
6200.80
all other parts see Turbelle® stream new model
6200.10
6200.80
12
Turbelle® stream
Pumpe Pump
Pompe
Treiber Driver
Driver
Trafo
Transformer Transformateur
(1)
(1)
Teileliste
4002.06
10
3000.78
1001.80
2002.71
Z11
4002.77
Z5
Z6
Z10
7082
Z4
1001.78
708
Z9
851.41
Z2
Z3
1001.79
102.41
Z1
1001.76
4002.25
21
Z8
141.18
Z7
121.17
19
141.15
20
141.14
16
17
121.16
102.43
15
18
102.40
851.44
13
14
4002.131
4002.202
9b
12a
4002.203
9a
2002.10
4002.20
9
4002.13
4002.07
8
11
4002.12
12
4002.08
6
7
Motor 220V sealed with main cable (with 5a)
Rotor
4002.11 Motor 220V mit Kabel vergossen (mit 5a)
4002.22 Motoranker
2002.11
2002.22
5
5a
Motor bearing (2pcs.)
4002.26 Motorlager (2St.)
4002.26
Liste de pièces
Felt strip
(extra bestellen)
1001.80 T-Stück
3000.78 Rohrmuffe ø25/28
1001.78 Rohrmuffe ø21/25
1001.76 Rohrstück
1652.79 Schlitzkörper
2002.71 Bio-Anschuß
4002.77 Strömungswinkel
7082 powertimer mit Ebbe-Flut Steuerung
708 powertimer
851.41 Halter für TUNZE SYSTEM
102.41 Spannwinkel V4A
Zubehör
4002.25 Reparaturbeutel (1, 12, 16, 17)
141.18 Schraubstutzen
141.17 Kreisel
121.16 Kreiselgehäuse
141.16
141.15 Kreisellager
141.14 Lagerscheibe
102.43 Schraube V4A M6x12
851.44 Scheibe
102.40 Spannhalter V4A
4002.131 Ritzel mit Feder
4002.13 Welle (mit Ritzel 12a)
4002.10 Motorgehäuse
4002.202 Spannring
Mounting clamp V4A
Attache V4A
Manchon de tuyau ø25/28
Branchement en T
T piece
Manchon de tuyau ø21/25
Partie de tuyau
Crépine
Raccord bioZ7
Coue d'écoulem
powertimer av. créer un mouvement de marée
Connecting sleeve ø25/28
Connecting sleeve ø21/25
Tube
Strainer
Bio connection
Flow deflector
powertimer with high and low tide simulation
powertimer
Support pour TUNZE SYSTEM
powertimer
Holder for TUNZE SYSTEM
(commander séparément)
Cornière V4A
Accessoires
Set réparation (1, 12, 16, 17)
Reccord fileté
Rotor
Carter du rotor
Coussinet du rotor
Rondelle
Vis V4A M6x12
Disque
Universal bracket V4A
Accesories
Repair kit (1, 12, 16, 17)
Intake fitting
Impeller
Impeller housing
Impeller bearing
Thrust washer
Screw V4A M6x12
Disc
Roue avec ressort
Axe complet (avec 12a)
Pinion with spring
Boîtier moteur
Shaft set (with 12a)
Screw V2A M4x20
Motor housing
Anneau tendeur
Vis V2A M4x20
Clamping ring
(order separately)
Languette de feutre
Shaft housing (with 9a
10a,/ 19b)
0b)
4002.203 Filzstreifen
Traverse (2pièces
Collone d'axe (avec 19a
0a,/19b)
0b)
Motor bearer (2pcs.)
Rubber mount (4pcs.)
0a,/ 19b)
4002.20 Wellenrohr (mit 1
0b)
9a
Bouchon (10pièces
Pied caoutchouc (4pièces
Retainer (10pcs.)
Induit
Moteur 220V coulé avec câble (avec 5a)
Palier moteur (2pièces)
Ventilateur
Couvercle
Vis V2A M3x10
4002.07 Holm (2St.)
4002.12 Gummifuß (4St.)
4002.08 Knebel (10St.)
Lid
Fan
4
4002.09 Lüfter
2002.02
4002.09
4002.02 Deckel
List of Parts
Screw V2A M3x10
2
4002
3
104.19
2002
1
2002 / 4002
13
14
Filter 3166 / 3167
Bio-Hydro-Reactor 3179
15
DOC Skimmer
16
Classic DOC Skimmer
Nano DOC Skimmer / Nano cleaner / Nano pump
< 2008
< 2008
17
Abschäumer • Skimmer • Ecumeur
240/2*
240/3
233/2*
220/3
* Artikelnummer vom Vorgängermodell
* Order no. for previous model
b
d
c
230/2*
230/3
a
Teileliste • List of Parts • Liste de pieces
220/3
230/3
240/3
Abschäumer
1 220.04 1 230.04 2
240.04 3 Pumpe mit 9
2 233.66
230.66
240.67
Abschäumer-Oberteil
3 230.05
230.05
230.05
Scheibe
4 225.04
225.04
225.04
Unterteil
5 233.14
220.14
245.14
Schaumtopf ohne 6/7
6
245.13
Schaumzylinder
7 214.15
214.15
214.15
Schaumtopfdeckel
8 230.35
230.35
230.35
Düsenrohr
9 233.13
235.13
235.13
Kreiselgeh. mit 9A/9B
9a 233.135
235.135
235.135
Düse (weiß)
9b 233.165
230.165 230.165 Vordüse (braun)
10 230.49
230.49
230.49
Schalld. mit Lufts.
10a 235.484
235.484
235.484
Kappe
10b 230.491
230.491
230.491
Kappe
11 3130.36
3130.36
3130.36
Lufteinstellschraube
12 230.55
230.55
230.55
Konsole
13 230.25 4 230.25 4
230.25 4 2 Halter
13a 2x3000.22 2x3000.22 2x3000.22 Lochschiene
13b 2x3000.24 2x3000.24 2x3000.24 Klemmhalter
13c 2x3000.261 2x3000.261 2x3000.261 Verbindungsstück o. Ge.
13d 230.252
230.252
230.252
2 Schr.+2Mutt.M6x25 sw
13 233.12
235.12
235.12
Kreisel
14
7240.26 5 Treiber
15
7410.602 6 Transformator
18
Skimmer
Pump with 9
Skimmer casing
Disk
Skimmer body lower part
Skimmer cup wihtout 6/7
Cylinder
Skimmer lid
Pressure pipe
Impeller hous.with 9A/9B
Nozzle (white)
Pre-nozzle (brown)
Silencer with air hose
Cup
Cup
Air regulator screw
Pump support
2 Holder
Mounting Bar
Clamp holder
Plate without thread
2 screwM6x25 +2 nuts black
Impeller
Driver
Transformer
Ecumeur
Pompe avec 9
Boîtier
Disque
Partie inférieure
Godet d’ecumage sans 6/7
Cylindre
Couvercle de godet
Lance
Chambre de rotor avec 9A/9B
Buse (blanc)
Pré-buse (brun)
Silencieux av. tuy. souple d’air
Bouchon
Bouchon
Vis réglage d’air
Support de pompe
2 Support
Barre de montage
Attache
Plaque sans filets
2 viss M6x25+ 2 écrou noir
Turbine
Driver
Transformateur
Artikelnummer vom Vorgängermodell:
Order no. for previous model:
1
233.02
2
235.02
3
240.02
4
2x3000.14 + 2x102.45
5
240.24
6
7400.60
SYSTEM Abschäumer • Skimmer • Ecumeur
238/2*
225/3
235/2*
235/3
*Order no. for previous model
245/2*
245/3
{
s. Anleitung • see Instructions • v. mode d’emploi: Turbelle
Teileliste •
225/3
1 220.04 1
2 238.03
3 230.05
4 225.04
5 233.14
6
7 214.15
8 230.35
9 233.13
9a 233.135
9b 233.165
10 230.49
10a 235.484
10b 230.491
11 3130.36
12 230.55
13 233.12
14
15
List of Parts • Liste de pieces
235/3
245/3
Abschäumer
230.04 2 240.04 3 Pumpe mit 9
235.03
245.67
Abschäumer-Oberteil
230.05
230.05
Scheibe
225.04
225.04
Unterteil
220.14
245.14
Schaumtopf ohne 6/7
245.13
Schaumzylinder
214.15
214.15
Schaumtopfdeckel
230.35
230.35
Düsenrohr
235.13
235.13
Kreiselgeh. mit 9A/9B
235.135 235.135 Düse (weiß)
230.165 230.165 Vordüse (braun)
230.49
230.49
Schalld. mit Lufts.
235.484 235.484 Kappe
230.491 230.491 Kappe
3130.36 3130.36 Lufteinstellschraube
230.55
230.55
Konsole
235.12
235.12
Kreisel
7240.26 4 Treiber
7410.6025 Transformator
Skimmer
Pump with 9
Skimmer casing
Disk
Skimmer body lower part
Skimmer cup wihtout 6/7
Cylinder
Skimmer lid
Pressure pipe
Impeller hous.with 9A/9B
Nozzle (white)
Pre-nozzle (brown)
Silencer with air hose
Cup
Cup
Air regulator screw
Pump support
Impeller
Driver
Transformer
Ecumeur
Pompe avec 9
Boîter
Disque
Partie inférieure
Godet d’écumage sans 6/7
Cylindre
Couvercle de godet
Lance
Carter du rotor avec 9A/9B
Buse (blanc)
Pré-buse (brun)
Silencieux av. tuy. souple d’air
Bouchon
Bouchon
Vis réglage d’air
Support de pompe
Turbine
Driver
Transformateur
®
1
233.02
2
235.02
3
240.02
4
240.24
5
7400.60
19
3115*
3115/2
3116/2
3130*
3130/2
3131/2
b
d
c
a
Teileliste
3115/2
1 3115.04 1
2 235.13
2a 235.135
2b 230.165
3 233.12
4 3115.10
5 3130.482
6 3130.36
7 3115.20
8 3166.07
9 233.14
10 214.15
11 3130.25 3
11a 2x3000.22
11b 2x3000.24
11c 3130.251
11d 3130.252
• List of parts
3116/2
3130/2
3115.04 230.04 2
235.13
235.13
235.135 235.135
230.165 230.165
233.12
235.12
3116.10 3130.10
3130.482 3130.482
3130.36 3130.36
3115.20 3115.20
3166.07 3166.07
233.14
220.14
214.15
214.15
3130.25 3130.25
2x3000.22 2x3000.22
2x3000.24 2x3000.24
3130.251 3130.251
3130.252 3130.252
• Liste
3131/2
230.04
235.13
235.135
230.165
235.12
3131.10
3130.482
3130.36
3115.20
3166.07
220.14
214.15
3130.25 3
2x3000.22
2x3000.24
3130.251
3130.252
des pièces
Abschäumer-Automat
Ersatzpumpe mit 2 + 3
Kreiselgehäuse
Düse (weiß)
Vordüse (braun)
Kreisel
Gehäuse
2 Schläuche + Kappe
Deckel für Pumpenhalt.
Sicherungsplatte
Schaumtopf o. Deckel
Schaumtopfdeckel
Halter
Lochschiene
Klemmhalter
Schiebeteil rechts
Schiebeteil links
Automatic Skimmer
Pump with 2 + 3
Impeller housing
Nozzle (white)
Pre-nozzle (brown)
Impeller
Housing
2 hoses + cap
Air regulating screw
Cover for pump
Retaining plate
Skimmer cup without lid
Skimmer cup lid
Holder
Mounting Bar
Clamp holder
Sliding piece l/h
Sliding piece l/h
Ecumeur automat.
Pompe avec 2 + 3
Chambre turbine
Buse (blanc)
Pré-buse (brun)
Turbine
Boîtier
2 tuyaux + bouchon
Vis de réglage d’air
Couvercle de pompe
Plaque de maintien
Godet d’écumage
Couvercle de godet
Support
Barre de montage
Support
Attache droite
Attache gauche
1
3115.03
2
235.02
3
2x3000.14
{
20
®
3140*
3140/2
3160*
3160/2
b
d
c
a
Teileliste •
3140/2
1 240.04 1
2 7240.26 3
3 7410.602 4
4 235.13
4a 235.135
4b 230.165
5 235.12
6 3140.10
7 3130.482
8 3130.36
9 3115.20
10 3166.07
11 245.14
12 214.15
13 245.13
14 3130.25 5
14a 2x3000.22
14b 2x3000.24
14c 3130.251
14d 3130.252
List of parts • Liste des pièces
3160/2
Abschäumer-Automat
2x230.04 2
Ersatzpumpe mit 4 + 5
Treiber
Transformator
2x235.13
Kreiselgehäuse
2x235.135
Düse (weiß)
2x230.165
Vordüse (braun)
2x235.12
Kreisel
3160.10
Gehäuse
3160.48
2 Schläuche + Kappe
3160.36
2x3115.20
Deckel für Pumpenhalterung
2x3166.07
Sicherungsplatte
245.14
Schaumtopf ohne Deckel
214.15
Schaumtopfdeckel
3160.13
Schaumzylinder
3130.25 5
Halter
2x3000.22
Lochschiene
2x3000.24
Klemmhalter
3130.251
Schiebeteil rechts
3130.252
Schiebeteil links
Automatic Skimmer
Pump with 4 + 5
Driver
Transformer
Impeller housing
Nozzle (white)
Pre-nozzle (brown)
Impeller
Housing
2 hoses + cap
Air regulating screw
Cover for pump
Retaining plate
Skimmer cup without lid
Skimmer cup lid
Cylinder
Holder
Mounting Bar
Clamp holder
Sliding piece l/h
Sliding piece l/h
Ecumeur automatique
Pompe avec 4 + 5
Driver
Transformateur
Chambre turbine
Buse (blanc)
Pré-buse (brun)
Turbine
Boîtier
2 tuyaux + bouchon
Vis de réglage d’air
Couvercle de maintien
Plaque
Godet d’écumage sans couv.
Couvercle de godet
Réacteur rehaussé
Support
Barre de montage
Support
Attache droite
Attache gauche
1
240.02
2
235.02
3
7240.25
4
7400.60
5
3000.14
{
®
21
Calcium Automat 3170
Osmolator Universal 3155
22
23
stream II >2008
SYSTEM Schnellwechselfilter • Quick-Change Filters • Filtres à èchange rapide
851 / 852 + 851.76 / 851.76
Turbelle ® powerhead / electronic
Turbelle ® 601/1001 / 2002/4002
851.02.B
851.02.S
851.02.B
851.02.S
878.71
1060.71
3178.71
2002.71
->Catalog
1651 / 1652 + 1651.76
1651.02.B
1651.02.S
853 / 1653
1651.02.B
1651.02.S
852.02.B
852.02.S
(3000.02)
(1590.30)
Schnellwechsel-Filter
Quick-Change Filter
Filtre à échange rapide
Turbelle ®
Turbelle ® powerhead / electronic
Turbelle 2002/4002 + 851.42
-> Catalog
weitere Informationen siehe
other Informations see
d’autres informations voir
24
852/1652
878.71
1060.71
3178.71
2002.71
->Catalog
SYSTEM Bio-Reaktor • Bio-Reactor • Réacteur biologique
Hydorkultur-Reaktor • Hydroponic Reactor • Réacteur a hydroculture
876
1676
851.02.B
851.02.S
1651.02.B
1651.02.S
879
1679
25
KOGAPUR reverse osmosis
S-model
(11)
Reinwasserbehälter
Récipient
d'eau pure
(16)
blau
blue
bleu
Storage
container
(Z1)
(7)
(3)
(5)/(7)
(15)
Wasserabfluß
Drainage
Écoulement
(6)/(7)
(1)
gelb
yellow
jaune
Kaltwasser
3/4" Anschluß
ESO
(9)
Cold water
(4)/(7)
(12)
schwarz
black
noir
8510
(13)
3/4" connection
Eau froide
raccord 3/4"
(11)
(4)/(7)
(6)/(7)
(5)/(7)
M-model
Umrechnungstabelle psi - bar
50 psi - 3,3 bar
60 psi - 4,0 bar
70 psi - 4,6 bar
80 psi - 5,3 bar
90 psi - 6,0 bar
(8)
100 psi- 6,6 bar
L-model
(15) (16) (3)
(13)
(10)
(3)
(16)
(11)
(9)
(17)
(7)
(10)
(15)
(10)
(4)/(7)
8520
8522
(5)/
(7)
(13)
8530
8532
(1)
(4)/
(7)
(6)/(7)
(5)/(7)
(9)
(17)
(2)
(1)
8510
8512.100
8512
8512.100
8520
8522.120
8522
8522.120
8530
8522.120
8532
8522.120
8534
8522.120
Teileliste
Kohle/Sedimentfilter
LIst of parts
Carbonfilter
Liste de piéces
Carbonfilter
8550.500
8552.500
8550.500
8552.500
8522.100
8550.500
8522.100
8552.500
8522.100
8554.500
Feinfilter 1µm
Membrane
Speisewasser (schw.)
Filter 1µm
Membrane
Feed water (black)
Filtre 1µm
Membrane
eau purifée (noir)
pure water (blue)
drain water (yelow)
pressure hose (white)
eau purifée (bleu)
Eau de refus (jaune)
Tuyau pour (blanc)
1/4” transition
1/8” transition”
1/4” elbow”
1/4” transition
1/8” transition
1/4” angle
11 8532.030 8532.030 8532.030 8532.030 8532.030 8532.030 8532.030 Winkel 1/8”
12 8557.000 8557.000 8557.000 8557.000 8557.000 8557.000 8557.000 Verschraubung 3/4”
13 8532.050 8532.050 8532.050 8532.050 8532.050 8532.050 8532.050 Manometer
1/8” elbow”
3/4” nylon nipple
press. gauge
1/8” angle
3/4” nylon nipple
Manomètre
14 8532.060
15 8550.520
16 8532.070
1
2
3
4
5
6
7
8556.000
8556.000
8556.000
8556.000
8556.000
8556.000
8556.000
Reinwasser (blau)
Solewasser (gelb)
Druckschlauch (weiß)
8 8532.010
9 8532.040
10 8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
Übergang 1/4”
Übergang 1/8”
Winkel 1/4”
8532.060
8552.520
8532.070
17
Z1 8540.000
26
(8)
(6)/
(7)
8540.000
8532.060
8550.520
8532.070
8532.060
8552.520
8532.070
8532.060
8550.520
8532.070
8532.060
8552.520
8532.070
8532.060
8554.520
8532.070
Schrauben 3,2x17
Kapilare 25% Rate
O-Ring
Screw 3,2x17
Capilary 25% rate
O-ring
Vis 3,2x17
Capilary 25% rate
O-ring
8532.080
8532.080
8532.080
8532.080
8532.080
8540.000
8540.000
8540.000
8540.000
O-ring
Access. (order sep.)
ESO Water level con.
O-ring
Access. (com. dep.)
8540.000
O-Ring
Zubehör (extra best.)
ESO Wasserst. Kontr.
Total price list with spare parts - Great Britain
The deliveries are made in compliance with our respectively applicable terms of delivery and payment. Prices in £.
Valid as from February 01, 2010. Subject to alterations. Any Exchange Rate fluctuations may cause price differences.
Kit
Art. No.
Designation
TS24
TS48
0015.000
0016.000
0018.000
0018.700
0021.000
0068.000
0075.000
0079.000
Turbelle® stream Kit TS24 _________________ 594.45
Turbelle® stream Kit TS48 ________________ 1013.70
Skimmer Kit 15 ____________________________ 489.74
Compact Kit 16 ____________________________ 676.52
Compact Kit 18 ___________________________ 1122.54
Compact Kit 18.7 _________________________ 1240.41
Compact Kit 21 ____________________________ 472.31
Calcium Dispenser Kit 68 __________________ 210.52
Kit 75 _____________________________________ 650.26
Kit 79 _____________________________________ 472.12
698.50
1191.10
575.40
794.90
1319.00
1457.50
555.00
247.40
764.10
554.70
Information media
0085.000_A Saltwater Aquarium __________________________ 9.69
0090.000
TUNZE catalogue - German / • _______________ 2.31
0090.000_A TUNZE catalogue - English / $US ____________ 2.31
0090.000_C TUNZE catalogue Spanish / • ________________ 2.31
0090.000_E TUNZE catalogue - English ___________________ 2.31
0090.000_F TUNZE catalogue - French / • ________________ 2.31
0090.000_G TUNZE catalogue - English / £ _______________ 2.31
0090.000_H TUNZE catalogue - Hungarian / • _____________ 2.31
0090.000_I
TUNZE catalogue - Italian / • ________________ 2.31
0090.000_O TUNZE catalogue Spanish / • ________________ 2.31
0090.000_R TUNZE catalogue - Russian __________________ 2.31
0090.000_S TUNZE catalogue Spanish / • ________________ 2.31
0091.000
Spare parts catalogue - German / • ___________ 1.54
0091.000_A Spare parts catalogue - English / $US _________ 1.54
0091.000_E Spare parts catalogue - English / • ____________ 1.54
0091.000_F Spare parts catalogue - French / • ____________ 1.54
0091.000_G Spare parts catalogue - UK / £ ________________ 1.54
0097.000
DVD: TUNZE Aquarientechnik GmbH _________ 7.55
0097.500
DVD: TUNZE Introduces (PAL) _______________ 7.55
0097.500_A DVD: TUNZE Introduces NTSC ______________ 7.90
0100/3_A
Aquarium Ecology, English __________________ 13.32
11.40
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
1.80
1.80
1.80
1.80
1.80
8.90
8.90
9.30
15.70
Art.No.
0102.400
0102.404
0102.407
0102.410
0102.430
0102.450
0102.780
0104.150
0104.180
0104.190
0104.241
0104.250
0104.710
0104.720
0104.730
0104.740
0104.790
0106.170
0110.010
0110.030
0110.090
0110.114
0110.130
0110.140
0110.260
0121.130
0121.131
0121.160
0121.170
0141.140
0141.150
0141.160
0141.170
0141.180
0200.000
0210.040
0210.042
0210.044
Price £ VAT 17.5%
Universal clamp V4A ______________________ 10.94
Screw knob _________________________________ 0.83
Disc ________________________________________ 0.92
Mounting bracket ____________________________ 6.23
Screw M6x12 V4A ___________________________ 0.69
Mounting clamp _____________________________ 6.59
Connecting sleeve ___________________________ 1.27
Impeller bearing _____________________________ 1.70
Screw connection ____________________________ 2.06
Screw M3x10 V2A ___________________________ 0.64
Clip _________________________________________ 0.96
Repair kit ___________________________________ 4.66
Tangit, 125 g (4.4 oz.) tube ___________________ 5.97
Silicone, 75 ml (2.5 oz.) ______________________ 5.71
Instant adhesive _____________________________ 4.28
Coral Fix - 112 g (4 oz.) ______________________ 7.61
Strainer, 7cm (2.7 in.) ________________________ 4.82
Impeller _____________________________________ 5.38
Screw M4x6 PA _____________________________ 0.75
Thermostat __________________________________ 5.34
Fan _________________________________________ 1.89
Wire protect.sleeve __________________________ 1.27
Shaft with pinion _____________________________ 4.03
Thrust washer _______________________________ 1.52
Motor bearing _______________________________ 9.87
Shaft with pinion _____________________________ 7.74
Shaft _______________________________________ 3.95
Impeller housing ____________________________ 19.54
Impeller _____________________________________ 6.81
Thrust washer,2 pcs. ________________________ 1.10
Impeller bearing,2pc _________________________ 4.42
Impeller _____________________________________ 8.32
Intake fitting ________________________________ 8.37
Nano Reefpack 200 ________________________ 130.64
Replacement pump _________________________ 29.43
Drive unit for 210.04 _________________________ 5.70
Upper bearing 2pcs. for 210.04 _______________ 1.65
12.90
1.00
1.10
7.30
0.80
7.70
1.50
2.00
2.40
0.80
1.10
5.50
7.00
6.70
5.00
8.90
5.70
6.30
0.90
6.30
2.20
1.50
4.70
1.80
11.60
9.10
4.60
23.00
8.00
1.30
5.20
23.00
9.80
9.80
153.50
34.60
6.70
1.90
Art. No.
Designation
Price £ VAT 17.5%
0210.045
0210.049
0210.165
0210.491
0214.150
0220.015
0220.040
0220.140
0220.400
0220.510
0220.521
0220.522
0220.526
0220.530
0220.540
0220.550
0220.558
0220.560
0220.568
0220.570
0220.571
0220.572
0220.700
0220.701
0220.702
0220.703
0220.704
0220.705
0220.706
0220.707
0220.708
0220.709
0220.710
0220.711
0225.040
0225.390
0225.460
0225.481.S
0230.015
0230.040
0230.050
0230.101
0230.165
0230.250
0230.252
0230.350
0230.490
0230.491
0230.550
0230.660
0231.020
0233.010
0233.120
0233.130
0233.135
0233.140
0233.165
0233.660
0235.010
0235.120
0235.130
0235.135
0235.140
0235.480
0235.481
0235.484
0240.010
0240.015
0240.020
0240.040
0240.484
0245.140
0300.000
0300.020
Impeller housing _____________________________ 5.59
Suction cups 4 pcs. __________________________ 2.65
Pre-nozzle __________________________________ 5.70
Cup with 4,6mm hole ________________________ 1.42
Skimmer cup lid ____________________________ 10.55
Motor block for 220.04 ______________________ 41.75
Pump for skimmer _________________________ 103.00
Skimmer cup _______________________________ 36.10
Aquarium tongs _____________________________ 22.96
Protective gloves ____________________________ 4.42
Rough surface, 77x59 mm (3.0 x 2.3 in.) ______ 1.78
Magnet. f. 220.55/54 _________________________ 9.43
Pile fabric surface, 77x59 mm (3.03 x 2.3 in.) __ 1.23
Power Magnet 220.53 _______________________ 13.03
Power Magnet 220.54 _______________________ 17.40
Power Magnet 220.55 _______________________ 86.17
Felt on the outside, 77x59 mm (3.03 x 2.3 in.) _ 2.83
Power Magnet 220.56 ______________________ 160.95
Fleece for acrylic panes ______________________ 1.05
Power Magnet 220.57 ______________________ 345.10
Rough surface, 115x77 mm (4.5 x 3.0 in.) _____ 4.31
Felt on the outside, 115x77 mm (4.5 x 3.03 in.) 7.10
Cleaning set _______________________________ 37.91
1/8" Brush ___________________________________ 3.49
1/4" Brush ___________________________________ 2.29
3/4" Brush ___________________________________ 2.48
Bottle brush _________________________________ 3.49
Bristle brush ________________________________ 1.65
TUNZE towel _______________________________ 8.35
Pick tool ____________________________________ 2.38
Screwdriver _________________________________ 5.04
Instructional DVD ___________________________ 6.14
Citric acid ___________________________________ 4.31
Squirt applicator _____________________________ 2.57
Skimmer housing.low _______________________ 13.18
Air hose _____________________________________ 1.13
Air pressure pipe ____________________________ 3.34
Cap f. silencer _______________________________ 0.63
Motor block for 230.04 ______________________ 73.79
Turbelle® Powerhead -> 9010.04 ____________ 128.40
Disc ________________________________________ 8.62
Screw M5x6mm, withe _______________________ 1.29
Pre-nozzle __________________________________ 5.70
Skimmer support ____________________________ 9.48
2 screw+2 nuts M6x25mm ___________________ 1.57
Pressure pipe _______________________________ 1.87
Silencer w.air hose __________________________ 7.21
Cup with 6,5mm hole ________________________ 1.42
Pump support ______________________________ 14.21
Skimmer casing ____________________________ 39.37
Return pump _______________________________ 35.57
Motor block for 233.02 ______________________ 46.82
Impeller _____________________________________ 6.55
Nozzle ______________________________________ 4.62
Skimmer cup w. over _______________________ 32.48
Pre-nozzle __________________________________ 5.48
Skimmer casing ____________________________ 32.80
Motor block for 235.02 ______________________ 73.79
HP Impeller _________________________________ 6.55
Nozzle ______________________________________ 4.81
2 clips ______________________________________ 2.63
Silencer _____________________________________ 7.21
Cup H14, ø 26mm ___________________________ 1.01
Cap _________________________________________ 1.01
Motor block for 240.02 ______________________ 59.64
Motor block for 240.04 ______________________ 59.64
Pump for skimmer
->240.04 _____________ 178.04
Pump for skimmer _________________________ 178.04
Reducing adaptor for hose ___________________ 0.80
Skimmer cup w. over _______________________ 57.41
Cartridge filter 300 ___________________________ 8.41
Filter cartridges, 75 mm (2.9 in.), 10 pcs. ____ 11.12
6.60
3.10
6.70
1.70
12.40
49.10
121.00
42.40
27.00
5.20
2.10
11.10
1.40
15.30
20.40
101.20
3.30
189.10
1.20
405.50
5.10
8.30
44.50
4.10
2.70
2.90
4.10
1.90
9.80
2.80
5.90
7.20
5.10
3.00
15.50
1.30
3.90
0.70
86.70
150.90
10.10
1.50
6.70
11.10
1.80
2.20
8.50
1.70
16.70
46.30
41.80
55.00
7.70
31.70
5.40
38.20
6.40
38.50
86.70
7.70
33.40
5.70
3.10
8.50
1.20
1.20
70.10
70.10
209.20
209.20
0.90
67.50
9.90
13.10
27
28
Art. No.
Designation
Price £ VAT 17.5%
0300.060
0305.120
0312.344
0320.000
0320.260
0320.280
0370.000
0390.040
0390.460
0505.000
0505.110
0505.120
0600.015
0602.120
0602.400
0605.000
0700.130
0800.000
0800.010
0800.015
0800.030
0800.040
0800.042
0800.043
0800.047
0800.048
0800.060
0800.070
0800.080
0800.140
0800.220
0802.010
0805.000
0805.015
0805.700
0808.100
0808.150
0820.000
0820.250
0820.260
0820.280
0820.290
0850.100.S
0850.250.S
0850.280.S
0851.020.S
0851.060
0851.100.S
0851.110
0851.180.S
0851.280.S
0851.290.S
0851.300.S
0851.320.S
0851.400.S
0851.440
0851.450.S
0851.760.S
0851.761.S
0870.000
0870.010
0870.020
0870.400.S
0870.900
0870.901
0870.950
0870.960
0871.000
0872.000
0872.010
0872.050
0873.000
0873.010
0875.900
0875.901
Stainer ______________________________________ 2.89
Rotor,shaft+bearing __________________________ 6.33
Glue-in nipple for hose, diam. 9 mm (.35 in.) ___ 0.77
Pot-type filter 320 __________________________ 16.37
Strainer _____________________________________ 2.76
Pot for 320 __________________________________ 8.95
Refillable cartridge 370 ______________________ 10.55
Union for hose, diam. 6x9 mm (.23 x .35 in.) __ 0.66
Y branch ____________________________________ 3.27
Reefpack 505 _____________________________ 397.30
O-ring seal __________________________________ 1.10
Motor block ________________________________ 26.57
Impeller _____________________________________ 4.03
Air draw nozzle ______________________________ 6.33
Riverpack 605. ____________________________ 229.49
Cartridge filter 800 __________________________ 12.96
Filter cartridges,135 mm (5.3 in.), 5 pcs. ______ 7.66
Motor block ________________________________ 36.98
Carbon floss cartridge, 135 mm (5.3 in.), 1 pc. 3.21
Nano pump _________________________________ 29.43
Drive unit for 800.04 (50 Hz) _________________ 5.72
Cover on impeller housing ____________________ 3.74
Outlet pipe, diam. 13 mm (.51in.) _____________ 2.25
Pump cover _________________________________ 3.95
Strainer _____________________________________ 5.48
Screw cap for PAF ___________________________ 2.66
Bracket _____________________________________ 3.05
Foam cartridge ______________________________ 2.57
Cartridge filter mat ___________________________ 1.72
Motor block for 802 _________________________ 46.82
Turbelle® e-jet 805 _________________________ 65.22
Motor block ________________________________ 67.10
Drive unit __________________________________ 18.38
TS mounting bar 97 cm (38.1 in.) ____________ 12.81
TS mounting bars .97 m (38.1 in.) /pack of 5 _ 55.64
Pot-type filter 820 __________________________ 21.98
Cover f. F320/820 ___________________________ 4.94
Strainer _____________________________________ 5.48
Pot for 820 _________________________________ 12.56
Return stop _________________________________ 1.53
TS bell compl. ______________________________ 19.01
Cover f. TS bell _____________________________ 5.03
TS bell _____________________________________ 11.66
TS lid black _________________________________ 9.75
Screw M 6x25 _______________________________ 0.73
TS cover ___________________________________ 29.77
TS-cover with stage ________________________ 12.68
TS screw connector _________________________ 2.40
Overflow grid ________________________________ 1.32
Cap _________________________________________ 1.19
Grid with cap ________________________________ 1.61
Adapter _____________________________________ 1.98
Holder for TS mounting bar ___________________ 7.35
Disc ________________________________________ 0.78
TS heater&electrode holding device ___________ 8.63
Quick-change filter extension ________________ 38.23
TS-Expansion box __________________________ 23.19
Refillable Cartridge 870 _____________________ 14.23
Bio cartidge _________________________________ 8.32
Cover for 870/1670 __________________________ 1.28
Cover with clip ______________________________ 4.68
Filter Carbon _______________________________ 41.59
Filter carbon ________________________________ 4.51
Filter Carbon _______________________________ 26.11
Filter Carbon ______________________________ 163.17
Wadding Refillable Cartridge 871 _____________ 14.20
Micro wadding, 10 x 60 g (2.1 oz.) ___________ 23.00
Micro wadding, 60 g (2.1 oz.) _________________ 2.55
Micro wadding, 5 kg (176 oz.) sack __________ 74.07
Macro wadding, 10 x 250 g (8.8 oz.) _________ 37.39
Macro wadding, 250 g (8.8 oz.) _______________ 4.16
GRANOVIT ________________________________ 17.35
GRANOVIT __________________________________ 2.11
3.40
7.40
0.90
19.20
3.20
10.50
12.40
0.80
3.80
466.80
1.30
7.60
31.20
4.70
7.40
269.70
23.00
15.20
9.00
43.50
3.80
34.60
6.70
4.40
2.60
4.60
6.40
3.10
3.60
3.00
2.00
55.00
76.60
78.80
21.60
15.10
65.40
25.80
5.80
6.40
14.80
1.80
22.30
5.90
13.70
11.50
0.90
35.00
14.90
2.80
1.60
1.40
1.90
2.30
8.60
0.90
10.10
44.90
27.20
16.70
9.80
1.50
5.50
48.90
5.30
30.70
191.70
16.70
27.00
3.00
87.00
43.90
4.90
20.40
2.50
Art. No.
Designation
Price £ VAT 17.5%
0875.950
0875.960
0876.460.S
0878.100.S
0878.280.S
0878.710
0879.710.S
0879.711
0880.900
0880.901
0880.950
0880.960
0910.000
0920.000
0930.000
0940.000
0950.000
1000.015
1001.060
1001.102
1001.150
1001.160
1001.240
1001.250
1001.400
1001.740
1001.741
1001.760
1001.770
1001.780
1001.790
1001.800
1002.120
1002.150
1002.400
1005.000
1005.015
1005.120
1005.700
1073.000
1073.008
1073.020
1073.022
1073.023
1073.024
1073.025
1073.027
1073.040
1073.041
1073.042
1073.043
1073.044
1073.047
1073.082
1073.083
1073.084
1073.085
1073.087
1073.090
1073.091
1073.092
1073.093
1073.094
1073.095
1073.096
1073.142
1073.143
1073.162
1073.163
1073.500
1073.600
1074.100
1074.200
1074/2
1075.050
GRANOVIT ________________________________ 11.12
GRANOVIT ________________________________ 60.08
Branch connec.f.hose ________________________ 2.92
Bio reactor box _____________________________ 20.16
Strainer bottom ______________________________ 4.49
Bio connection for 805 _______________________ 4.06
Bio tube _____________________________________ 1.94
Distribution nozzle ___________________________ 0.60
Calcium carbonate __________________________ 27.13
Calcium carbonate ___________________________ 2.83
Calcium carbonate __________________________ 16.36
Calcium Carbonate _________________________ 72.94
Quickphos 750 ml (25 oz.) __________________ 15.19
Silphos 750 ml (25.4 oz.) ____________________ 24.97
Zeolite 750 ml (25 oz.) ______________________ 10.39
Carbophos 750 ml (25.3 oz.) ________________ 13.69
NanoChem 300 ml (10 oz.) ___________________ 9.81
Motor block ________________________________ 33.31
2 Screw M 3x30 V2A ________________________ 0.77
Clamping ring _______________________________ 3.15
Impeller bearing _____________________________ 3.15
Cable clamp ________________________________ 1.23
Repair kit ___________________________________ 5.70
Air venturi ___________________________________ 5.08
Overflow tube ______________________________ 15.09
Glueing nipple
D=7/11 ____________________ 0.78
Pipe for Turbelle® ___________________________ 3.59
Flow deflector _______________________________ 2.16
Bushing, diam. 21/25 mm (.82/.98 in.) _________ 1.42
Strainer, 12 cm (4.7 in.) ______________________ 6.23
T-piece _____________________________________ 3.82
Impeller _____________________________________ 4.03
Reducer ____________________________________ 1.47
Air draw nozzle ______________________________ 5.08
Turbelle® e-jet 1005 ________________________ 53.10
Motor block ________________________________ 67.10
Drive unit __________________________________ 18.38
Inlet hose and fittings _______________________ 44.64
Recirculation Pump Silence. _________________ 22.77
Cover with O ring seal _______________________ 5.04
Suction housing _____________________________ 6.42
Housing locking bar __________________________ 5.55
4 suction cups + 2 hose supports _____________ 4.26
Drive unit with bearing ______________________ 14.12
Screw cap 3/4 in., 10 bar (145 psi) ____________ 2.81
Drive unit for 1073.03/.04 old ________________ 18.38
Impeller housing for 1073.03/.04 old __________ 20.58
Screwed socket with O ring seal ______________ 3.74
Cover with O ring seal _______________________ 5.72
Suction housing _____________________________ 6.42
Housing locking bar __________________________ 5.55
4 suction cups + 2 hose supports _____________ 4.26
Drive unit with shaft _________________________ 5.72
Master electronic 1073.090 _________________ 242.09
3 O-rings seal Master 1073.09 ________________ 4.68
Drive unit, impeller f. 1073.09 _______________ 34.39
Impeller housing 1073.09 ____________________ 32.74
Ceramic shaft with holder ___________________ 21.35
Hose adapter DN38, 1"1/2G __________________ 4.21
Strainer _____________________________________ 8.02
Drive unit with impeller for 1073.14 __________ 29.93
Drive unit with impeller for 1073.16 __________ 29.93
Hose,diam.25 x200mm ______________________ 2.81
Clamp ______________________________________ 2.43
Housing from 1074 _________________________ 52.96
Cover ______________________________________ 10.09
Overflow Box _______________________________ 83.99
Outlet hose a. clamp 1m/D.40mm ___________ 13.46
13.10
70.60
3.40
23.70
5.30
4.80
2.30
0.70
31.90
3.30
19.20
85.70
17.80
29.30
12.20
16.10
11.50
39.10
0.90
3.70
3.70
17.30
1.40
6.70
6.00
17.70
0.90
4.20
2.50
1.70
7.30
4.50
4.70
1.70
6.00
62.40
78.80
8.10
21.60
52.50
26.80
64.70
5.90
7.50
6.50
5.00
16.60
109.00
3.30
21.60
24.20
4.40
38.10
6.70
7.50
6.50
5.00
6.70
284.50
5.50
40.40
38.50
25.10
4.90
9.40
35.20
38.50
35.20
38.50
3.30
2.90
62.20
11.90
98.70
15.80
Art. No.
Designation
Price £ VAT 17.5%
1075.500
1075/2
1076.150
1076/2
1077.000
1077.100
1200.010
1200.015
1200.150
1201.130
1205.000
1205.015
1205.700
1278.460
1281.313
1282.150
1500.120
1500.130
1560.060
1572.200
1590.300.S
1600.000
1600.010
1600.015
1600.030
1600.060
1605.000
1605.015
1605.700
1651.020.S
1651.761.S
1652.790
1670.000
1674.291
1678.020
1678.370
1678.380
1678.390
1678.400.S
1678.710.S
1691.100
1891.100
2002.000
2002.020
2002.100
2002.110
2002.220
2002.710
3000.010
3000.015
3000.020
3000.030
3000.040
3000.050
3000.070
3000.080
3000.090
3000.092
3000.100
3000.110
3000.120
3000.130
3000.220
3000.225
3000.230
3000.240
3000.243
3000.244
3000.245
3000.250
3000.260
3000.261
3000.264
3000.270
3000.280
Outlet filter _________________________________ 45.49
Outlet hose ________________________________ 26.93
Protective grid _______________________________ 6.47
Wall Overflow ______________________________ 76.11
Central Overflow ____________________________ 76.11
Screw connection, pipe and hose ____________ 40.70
Motor block for 1200 ________________________ 73.79
Motor block ________________________________ 67.10
Bushing, outside diam. 25 mm (.98 in.) ________ 1.85
Turbelle® e-jet 1205 _______________________ 105.28
Motor block ________________________________ 67.10
Drive unit __________________________________ 18.38
Union for hose, diam. 9x12 mm (.35 x .47 in.) _ 5.21
2 screw+2 nuts M6x16mm ___________________ 1.49
Bushing - outside diam. 25 mm (.98 in.) _______ 2.53
Impeller _____________________________________ 4.03
Strainer ____________________________________ 12.73
Bubble counter _____________________________ 10.15
Insulation mat _______________________________ 3.81
Cartridge filter 1600 _________________________ 19.58
Spare filter cartridge, 225 mm (8.8 in.), 5 pcs. 10.60
Motor block ________________________________ 40.50
Carbon floss cartridge, 225 mm (8.8 in.), 1 pc. 5.72
Strainer ____________________________________ 11.17
Turbelle® e-jet 1605 ________________________ 65.30
Motor block ________________________________ 67.10
Drive unit __________________________________ 18.38
TS-Cover double black ______________________ 16.74
TS-Box (empty) ____________________________ 38.54
Strainer, 17 cm (6.6 in.) ______________________ 8.46
Refillable cartridge 1670 _____________________ 24.51
Grid with cap ________________________________ 1.78
Bio filter ring 10p. _____________________________ 2.11
PVC hose diam. .23 x .34 x 78.7 in. __________ 2.47
PVC hose diam. .23 x .34 x 393.6 in. ________ 11.53
PVC hose diam. 23 x .34 x 39.1 in. __________ 1.69
Hose clip ____________________________________ 0.81
Connection for bio ___________________________ 3.70
Glass housing
Kit 16/21 _______________ 159.82
Glass housing
Kit 16/21 _______________ 159.82
Turbelle® classic 2002 _____________________ 169.88
Cover ______________________________________ 13.56
Motor housing ______________________________ 38.05
Motor with cable ____________________________ 69.56
Rotor ______________________________________ 22.07
Bio connection for 2002, 4002 ________________ 8.58
Motor block for 3000 ________________________ 73.79
Motor block ________________________________ 67.10
O-ring seal, 78x2.5mm _______________________ 1.27
Cooling duct ________________________________ 3.00
Upper bearing _______________________________ 1.04
Magnetic rotor ______________________________ 10.82
Drive shaft __________________________________ 6.06
Brake shoes 2 pcs. __________________________ 2.06
Brake shell + ring ____________________________ 6.10
Brake ring ___________________________________ 1.05
Bearing bush ________________________________ 2.95
Clampring ___________________________________ 2.02
Impeller _____________________________________ 4.03
Mounting bar ________________________________ 2.63
Elastic ground, 1 pair ________________________ 0.46
Sliding unit __________________________________ 1.97
Clamp holder ________________________________ 4.28
Screw set ___________________________________ 1.53
Holding device extension _____________________ 2.77
Cable fastener _______________________________ 9.94
Turbelle® holder _____________________________ 6.35
Holding device extension _____________________ 7.88
Plate without thread __________________________ 1.01
2 screws M5x10mm _________________________ 1.40
Adhesive attachment for holder _______________ 2.02
Holding bracket ______________________________ 1.87
53.50
31.60
7.60
89.40
89.40
47.80
86.70
78.80
2.20
22.70
123.70
78.80
21.60
6.10
1.80
3.00
4.70
23.00
15.00
11.90
4.50
23.00
12.50
47.60
6.70
13.10
76.70
78.80
21.60
19.70
45.30
9.90
28.80
2.10
2.50
2.90
13.50
2.00
1.00
4.30
187.80
187.80
199.60
15.90
44.70
81.70
25.90
10.10
86.70
78.80
1.50
3.50
1.20
12.70
7.10
2.40
7.20
1.20
3.50
2.40
4.70
20.60
3.10
0.50
2.30
5.00
1.80
3.30
11.70
7.50
9.30
1.20
1.60
2.40
2.20
Art. No.
Designation
Price £ VAT 17.5%
3000.300
3000.400
3000.500
3000.600
3000.610
3000.612
3000.620
3000.630
3000.640
3000.650
3000.660
3000.780
3001.400
3005.000
3005.015
3005.130
3005.700
3005.740
3060.400
3060.410
3060.420
3060.440
3060.450
3060.460
3060.500
3110.030
3110.141
3110.150
3110.310
3110.480
3110.490
3115.010
3115.015
3115.040
3115.480
3130.020
3130.130
3130.160
3130.250
3130.340
3130.360
3130.482
3150.110
3150.250
3150.300
3150.310
3155.000
3155.100
3155.200
3155.250
3155.500
3155.600
3165.000
3165.080
3165.100
3165.400
3166.000
3166.020
3166.050
3166.060
3166.070
3166.100
3166.200
3166.231
3166.232
3166.250
3166.280
3166.500
3166.760
3167.000
3167.200
3167.500
3170.000
3170.100
3170.134
Set 3000.07+3000.08 ________________________ 7.08
Set 3000.09+3000.10 ________________________ 7.36
Internal parts Turbelle® _____________________ 21.83
Drive unit __________________________________ 18.38
Upper bearing _______________________________ 1.04
O-ring seal, 13x2.5mm _______________________ 1.01
Bearing bush ________________________________ 2.95
Magnetic rotor ______________________________ 10.82
Drive shaft __________________________________ 4.28
Bearing shell ________________________________ 2.95
2 Brake shoes _______________________________ 1.31
Bushing, diam. 25/28 mm (.98 / 1.1 in.) _______ 1.68
Air draw nozzle ______________________________ 6.74
Turbelle® e-jet 3005 ________________________ 91.71
Motor block ________________________________ 67.10
Motor block cover __________________________ 67.10
Drive unit __________________________________ 18.38
Bearing and attenuation disk _________________ 67.10
Bracket _____________________________________ 2.27
Suction cup holder ___________________________ 4.19
Suction bell 3 pcs. ___________________________ 1.23
Suction bell 4 pcs. ___________________________ 1.62
Silencer holder for old Turbelle® _____________ 10.12
Silencer holding device ______________________ 10.12
Set 3060.40+3060.41 ________________________ 5.46
Cover for 3110(/2) ___________________________ 6.09
Skimmer cup 300 ml (10.1 f oz.) ______________ 8.95
Skimmer cup lid _____________________________ 4.94
Cover with slots _____________________________ 5.08
Hose with nipple _____________________________ 1.38
Hose with nipple _____________________________ 1.38
Motor block ________________________________ 42.25
Motor block for 3115.04 _____________________ 41.75
Turbelle® Powerhead ______________________ 103.00
Silencer with hose ___________________________ 7.21
Cover with four slots _________________________ 3.58
Impeller housing w. nozzel f. Comline ________ 28.44
Nozzle ______________________________________ 5.70
Comline skimmer support ___________________ 14.52
Pressure pipe _______________________________ 1.87
M6 air regulating screw ______________________ 1.29
Set: 2 hoses+ cap ___________________________ 7.21
Switched Socket Outlet 3150.11 _____________ 42.36
Support for sensor ___________________________ 7.90
Sensor w.cinch plug ________________________ 21.09
Holder board ________________________________ 1.52
Osmolator Universal _______________________ 129.54
Sliding unit for sensor ________________________ 2.28
Sliding unit for level sensor ___________________ 1.96
Support f. Osmolator ________________________ 17.76
Magnet holder for operating sensor ___________ 17.88
Magnet holder for two sensors _______________ 19.72
Nano Cleaner ______________________________ 50.92
Bottom lid for 3165, 9002 _____________________ 2.53
Nano Cleaner housing _______________________ 27.24
Outlet pipe with flow deflector ________________ 3.31
Comline filter. ______________________________ 64.15
Sliding cover ________________________________ 3.04
Cup H7A, ø 19mm ___________________________ 1.01
Cup black ø 9,5mm __________________________ 1.01
Retaining plate ______________________________ 3.04
Filter housing _______________________________ 39.58
Comline bell compl. _________________________ 19.86
Sliding unit Comline holder right _______________ 1.97
Sliding unit Comline holder left ________________ 1.97
Comline support ____________________________ 10.18
Pot with handle _____________________________ 14.21
Comline filter _______________________________ 99.51
Tube 19x300 ________________________________ 3.59
Comline double filter. ______________________ 122.56
Comline bell complete for 3167 ______________ 19.86
Comline double filter _______________________ 150.31
Comline automatic calcium dispenser _______ 197.99
Housing of Calcium Automat ________________ 32.74
Connecting unit to 800.040 __________________ 11.74
8.30
8.60
25.70
21.60
1.20
1.20
3.50
12.70
5.00
3.50
1.50
2.00
7.90
107.80
78.80
78.80
21.60
78.80
2.70
4.90
1.40
1.90
11.90
11.90
6.40
7.20
10.50
5.80
6.00
1.60
1.60
49.60
49.10
121.00
8.50
4.20
33.40
6.70
17.10
2.20
1.50
8.50
49.80
9.30
24.80
1.80
152.20
2.70
2.30
20.90
21.00
23.20
59.80
3.00
32.00
3.90
75.40
3.60
1.20
1.20
3.60
46.50
23.30
2.30
2.30
12.00
16.70
116.90
4.20
144.00
23.30
176.60
232.60
38.50
13.80
29
30
Art. No.
Designation
Price £ VAT 17.5%
3170.135
3170.200
3170.300
3170.460
3170.500
3174.112
3178.710
3179.000
3179.020
3179.050
3179.100
3200.000
3200.520
4002.000
4002.020
4002.060
4002.070
4002.080
4002.090
4002.100
4002.110
4002.120
4002.130
4002.131
4002.200
4002.202
4002.203
4002.220
4002.250
4002.260
4002.770
5000.020
5000.150.S
5000.240
5000.300
5000.380
5000.390
5000.430.S
5000.440
5000.500
5000.780.S
5001.015
5001.390.S
5002.100
5002.250
5005.000
5005.015
5012.010
5016.000
5016.100
5017.000
5020.250
5020.300
5024.010
5024.020
5024.040
5024.042
5074.000
5074.010
5074.500
6025.000
6025.100
6025.130
6025.200
6025.250
6025.500
6025.510
6025.700
6025.740
6045.000
6045.100
6045.130
6055.000
6055.100
6055.240
Connecting unit to 1073.008 _________________ 11.74
Reactor of Calcium Automat ________________ 94.10
Reducing adapter and T piece ________________ 2.02
Y branch ____________________________________ 3.86
Automatic calcium dispenser extension. ______ 56.96
Screw cap and seal __________________________ 5.08
Bio connection for 3005 ______________________ 7.85
Bio-hydro-reactor ___________________________ 56.96
Sliding cover with cutout _____________________ 3.04
Filter mat ___________________________________ 3.81
Housing ____________________________________ 32.74
Cartridge filter 3200 _________________________ 35.35
Connector __________________________________ 11.57
Turbelle® classic 4002 _____________________ 199.75
Cover ______________________________________ 15.58
Screw M 4x20 V2A __________________________ 0.73
Motor bearer 2 pcs. __________________________ 3.90
Retainer 10 pcs. _____________________________ 4.59
Fan _________________________________________ 4.89
Motor housing ______________________________ 38.01
Motor with cable ____________________________ 85.90
Rubber mount 4 pcs. ________________________ 3.81
Shaft set ____________________________________ 7.74
Pinion with spring ____________________________ 3.81
Shaft housing ______________________________ 11.71
Clamping ring _______________________________ 3.18
Felt strip ____________________________________ 0.96
Rotor ______________________________________ 21.18
Repair kit __________________________________ 11.66
Motor bearings 2pcs. _______________________ 15.58
Flow deflector _______________________________ 3.52
Metering pump _____________________________ 14.47
Protective grid _______________________________ 5.97
Hose clamp _________________________________ 1.15
Sensor w.cinch plug ________________________ 21.09
PVC hose diam. .15 x .27 x 393.6 in. _________ 9.03
Cap _________________________________________ 1.10
Cap _________________________________________ 0.98
Holder for 3 sensors ________________________ 15.40
Plug in connector ____________________________ 1.51
Motor block ________________________________ 94.48
Silocon hose (12,5cm) _______________________ 4.01
Storage container 13 l (3.4 USgal.) ____________ 6.85
Storage container 27 l (7.1 USgal.) ___________ 13.04
Turbelle® e-jet 5005 _______________________ 129.06
Motor block ________________________________ 67.10
Power supply unit 11V _______________________ 12.18
Controller no more available see 5017 ________ 96.40
Velcro® strips 2x5,5cm (2.1 in.) ______________ 0.79
Controller __________________________________ 96.40
Air adjust (chock) ____________________________ 1.23
Sensor w. jack plug _________________________ 21.09
Filter sponge for 5024 ________________________ 2.02
Top cover for 5024,3165 _____________________ 2.53
Universal pump Mini 5024.04 _________________ 9.50
Drive unit for 5024.04 ________________________ 3.22
Calcium dispenser __________________________ 70.70
Non-return valve water _______________________ 2.38
Calcium hydroxide - 250 g (.55 lbs.) ___________ 7.33
Turbelle® nanostream® 6025 ________________ 40.01
Motor block ________________________________ 20.16
Propeller housing ____________________________ 7.48
Protective grating ____________________________ 6.08
Nanostream® Rock _________________________ 30.17
Magnet holder ______________________________ 14.42
Clamp ______________________________________ 5.14
Drive unit ___________________________________ 7.48
Disc for drive ________________________________ 0.94
Turbelle® nanostream® 6045 ________________ 58.03
Motor block ________________________________ 27.83
Propeller housing ____________________________ 8.89
Turbelle® nanostream® 6055 _______________ 147.33
Motor block ________________________________ 79.51
Power supply unit 12-24V DC ________________ 27.13
13.80
110.60
2.40
4.50
66.90
6.00
9.20
66.90
3.60
4.50
38.50
41.50
13.60
234.70
18.30
0.90
4.60
5.40
5.70
44.70
100.90
4.50
9.10
4.50
13.80
3.70
1.10
24.90
13.70
18.30
4.10
17.00
7.00
1.40
24.80
10.60
3.70
1.30
1.20
18.10
1.80
111.00
4.70
8.00
15.30
151.60
78.80
14.30
113.30
0.90
113.30
1.40
24.80
2.40
3.00
11.20
3.80
83.10
2.80
8.60
47.00
23.70
8.80
7.10
35.40
16.90
6.00
8.80
1.10
68.20
32.70
10.40
173.10
93.40
31.90
Art. No.
Designation
Price £ VAT 17.5%
6055.700
6060.015
6060.120
6060.250
6065.000
6065.100
6065.130
6065.500
6065.510
6065.600
6065.700
6065.792
6080.015
6080.120
6080.130
6080.200
6080.230
6080.250
6080.400
6080.500
6080.520
6080.600
6080.640
6080.641
6085.000
6085.100
6085.700
6091.000
6100.015
6100.100
6100.120
6100.600
6100.700
6101.015
6101.240
6101.241
6101.242
6101.243
6101.244
6105.000
6105.100
6105.500
6105.700
6125.000
6125.100
6125.700
6130.015
6200.015
6200.100
6200.120
6200.130
6200.230
6200.250
6200.255
6200.500
6200.509
6200.700
6200.800
6201.015
6205.000
6205.100
6205.130
6205.200
6205.500
6205.600
6205.700
6206.000
6206.100
6206.200
6212.020
6212.070
6212.200
6212.300
6215.000
6215.015
Drive unit for 6055 ___________________________ 7.48
Motor block ________________________________ 41.75
Hydro propeller ______________________________ 7.57
Turbelle® holder _____________________________ 9.58
Turbelle® stream 6065 ______________________ 87.09
Motor block ________________________________ 34.82
Propeller housing ___________________________ 17.54
Magnet holder ______________________________ 26.14
Clamp ______________________________________ 6.98
Magnet Holder Silence ______________________ 29.81
Drive unit __________________________________ 14.34
Disc for drive ________________________________ 0.94
Motor block ________________________________ 73.79
Hydro propeller ______________________________ 7.57
Suction housing ____________________________ 28.55
Sliding piece with hinge ______________________ 3.71
Holder stabilizer _____________________________ 2.86
Swivel arm __________________________________ 2.86
Magnet holder ______________________________ 26.14
Clamp holder ________________________________ 9.17
Drive unit __________________________________ 21.24
Drive shaft __________________________________ 5.24
Screw M4x16 _______________________________ 0.83
Turbelle® stream 6085 _____________________ 114.83
Motor block ________________________________ 59.12
Drive unit __________________________________ 16.65
Wavecontroller _____________________________ 63.33
Motor block for 6100/6100A _________________ 59.64
Turbelle® stream rep. ______________________ 147.55
Hydro propeller _____________________________ 11.45
Drive unit for 6000/6100/6200 _______________ 21.53
Drive unit+ propeller _________________________ 20.86
Motor block _______________________________ 156.22
Power supply unit 12-24V DC ________________ 36.48
15 V jumper for 6101.240 _____________________ 1.38
24 V jumper for 6101.240 _____________________ 1.38
18 V jumper for 6101.240 _____________________ 1.38
12 V jumper for 6101.240 _____________________ 1.38
Turbelle® stream 6105 _____________________ 209.62
Motor block _______________________________ 113.08
Safety Connector ___________________________ 32.74
Drive unit __________________________________ 18.78
Turbelle® stream 6125 _____________________ 152.60
Motor block ________________________________ 77.17
Drive unit __________________________________ 18.78
Motor block ________________________________ 86.57
Motor block for 6200/6200A ________________ 113.55
Turbelle® stream rep. ______________________ 200.70
Hydro propeller _____________________________ 13.84
Suction housing ____________________________ 33.46
Sliding piece + screw ________________________ 3.71
Stream Rock _______________________________ 55.34
Turbelle® holder ____________________________ 11.69
Magnet holder. _____________________________ 37.50
9 elastic pads f. Magnet Holder _______________ 2.02
Drive unit + propeller ________________________ 27.89
Transformer 20V/80VA ______________________ 78.15
Motor block _______________________________ 207.67
Turbelle® stream 6205 _____________________ 333.71
Motor block _______________________________ 165.35
Magnet holder ______________________________ 37.50
Magnet Holder Silence ______________________ 41.17
Drive unit __________________________________ 26.09
Nano Wavebox ____________________________ 217.33
Nano Wavebox housing _____________________ 34.94
Nano Wavebox pump _______________________ 97.86
Cover with twelve slots ______________________ 3.58
Retaining plate _____________________________ 14.14
Sponge-ring _________________________________ 6.99
Wavebox __________________________________ 366.18
Motor block _______________________________ 205.43
8.80
49.10
8.90
11.30
102.30
40.90
20.60
30.70
8.20
35.00
16.80
1.10
86.70
8.90
33.50
8.40
4.40
3.40
3.40
30.70
10.80
25.00
6.20
1.00
134.90
69.50
19.60
74.40
70.10
173.40
13.50
25.30
24.50
183.60
42.90
1.60
1.60
1.60
1.60
246.30
132.90
38.50
22.10
179.30
90.70
22.10
101.70
133.40
235.80
16.30
39.30
4.40
65.00
13.70
44.10
2.40
32.80
91.80
244.00
392.10
194.30
32.80
9.50
44.10
48.40
30.70
255.40
41.10
115.00
4.20
16.60
8.40
8.20
430.30
241.40
Art. No.
Designation
Price £ VAT 17.5%
6215.100
6215.200
6215.300
6215.500
6250.510
6260.015
6260.100
6261.000
6261.015
6300.130
6300.240
6300.700
6301.015
6305.000
6305.100
6305.130
6305.700
7005.140
7008.000
7008.200
7008.400
7008.500
7010.000
7011/2
7012/2
7013.000
7014/2
7015/2
7016.000
7016.500
7017/2
7019/2
7020/2
7028.900
7028.902
7028/3
7028/3_A
7030.140
7032/2
7040.110
7040.115
7040.117
7040.120
7040.130
7040.140
7040.200
7040.400
7055.100
7070.010
7070.012
7070.015
7070.100
7070.110
7070.250
7070/2
7071/2
7072.100
7072.200
7072.300
7073.100
7074.110
7074.400
7074.500
7074/2
7075.120
7075/2
7077.100
7077.110
7077.150
7077.200
7077.210
7077.300
7077.310
7077/3
7079.150
Wavebox housing ___________________________ 50.44
Wavebox pump ____________________________ 220.11
Foam ring ___________________________________ 5.61
Wavebox extension ________________________ 326.30
O-ring seal 50x6 mm __________________________ 4.11
Motor block _______________________________ 106.60
Wavebox pump ____________________________ 186.06
Wavebox pump ____________________________ 222.14
Motor block _______________________________ 168.96
Suction housing ø63mm _____________________ 46.23
Power supply unit 24 VDC _________________ 116.93
Drive unit + propeller ________________________ 35.26
Motor block _______________________________ 318.38
Turbelle® stream 6305 _____________________ 478.59
Motor block _______________________________ 259.03
Drive unit __________________________________ 26.09
Calibration solution 600 µS/cm ________________ 4.89
Reef Excel® Lab Marine Salt, 8kg ___________ 20.21
Reef Excel® Lab Marine Salt, 16 kg __________ 41.96
Reef Excel® lab marine salt, 4 x 8kg ________ 82.19
Reef Excel® lab marine salt, 20kg ___________ 48.61
Quick test for nitrate, 100 strips _____________ 21.31
Nitrate measuring box _______________________ 40.37
Nitrite measuring box _______________________ 66.66
Multistick __________________________________ 33.54
Carbonate hardness measuring box __________ 41.98
Calcium measuring box _____________________ 66.66
Quick test for phosphate ____________________ 36.28
High sensitivity test for phosphate ___________ 83.91
Ammonia measuring box ____________________ 41.25
Iron measuring box _________________________ 39.99
Total hardness measuring box _______________ 25.69
TUNZE® Aquawind _________________________ 48.64
Power supply unit __________________________ 24.03
Temperature controller set °C ______________ 149.40
Temperature controller set °F _______________ 149.40
Calibration solution 50 mS/cm ________________ 4.89
Conductivity meter ________________________ 202.08
pH-buffer, pH 9 ______________________________ 4.98
ph-buffer, pH 5 ______________________________ 5.48
pH-buffer, ph 7 ______________________________ 4.22
Buffer solution for pH 7 and 9 ________________ 7.99
Buffer solution for pH 5 and 7 ________________ 8.15
Buffer set pH 5/7/9 _________________________ 13.48
Cleaning solution ____________________________ 4.89
3 m KCl solution 50ml ________________________ 4.22
mV Electrode ______________________________ 114.15
CO2 non-return valve. ________________________ 8.66
Glue-in nipple for hose, diam.15x.23 in. _______ 0.80
Glue-in nipple 30° for hose, diam.15 x .23 in. __ 0.80
pH Electrode 7070.10 _______________________ 60.76
pH Electrode 7070.11 _______________________ 68.05
Wall holder __________________________________ 3.95
pH controller ______________________________ 205.29
mV controller ______________________________ 233.49
pH-Electrode f.7072 _________________________ 87.03
Silicon hose diam. 15 x.27 x196.8 in. ________ 11.54
Platinum electrode _________________________ 121.06
Valve Set 7074.11 __________________________ 86.25
12V solenoid valve __________________________ 62.82
CO2 diffuser _______________________________ 19.85
pH/CO2 controller set ______________________ 284.64
Switched socket outlet ______________________ 69.71
mV controller set __________________________ 292.81
Press. gauche 7077/2 0-250 bar _____________ 10.33
Press. gauche 7077/3 0-250 bar _____________ 12.40
Seal ring for 7077.100 ________________________ 1.01
Fine adjustment val. 7077/2 _________________ 10.33
Fine adjustment val. 7077/3 _________________ 11.75
Seal ring for 7077/2 __________________________ 2.53
Seal ring for 7077/3 __________________________ 2.53
Pressure reducer ___________________________ 60.36
CO2 cylinder - 1.5 kg (3.3 lbs.) _____________ 107.27
59.30
258.60
6.60
383.40
4.80
125.30
218.60
261.00
198.50
54.30
137.40
41.40
374.10
562.30
304.40
43.50
30.70
5.70
23.70
49.30
96.60
57.10
25.00
47.40
78.30
39.40
49.30
78.30
42.60
98.60
48.50
47.00
30.20
57.20
28.20
175.50
175.50
5.70
237.40
5.90
6.40
5.00
9.40
9.60
15.80
5.70
5.00
134.10
10.20
0.90
0.90
71.40
80.00
4.60
241.20
274.40
102.30
13.60
4.20
142.20
101.30
73.80
23.30
334.50
81.90
344.10
12.10
14.60
1.20
12.10
13.80
3.00
3.00
70.90
126.00
Art. No.
Designation
Price £ VAT 17.5%
7079.200
7080.000
7091.000
7092.300
7092.340
7094.050
7094.400
7095.000
7095.051
7096.000
7180.010
7180.015
7200.200
7200.600
7210.202
7240.000
7240.015
7240.245
7240.256
7240.270
7240/2
7400.610
7410.120
7410.602
7607/2
8001.000
8002.000
8003.000
8004.000
8005.000
8006.000
8007.000
8008.000
8009.000
8016.000
8018.000
8020.000
8040.000
8041.000
8041.100
8042.000
8043.000
8043.070
8043.100
8044.000
8045.000
8045.070
8048.000
8049.000
8051.000
8062.000
8063.000
8065.000
8068.000
8072.000
8073.000
8075.000
8078.000
8101.000
8102.000
8103.000
8104.000
8105.000
8106.000
8107.000
8107.010
8108.000
8108.010
8110.000
8110.010
8111.000
8112.000
8114.000
8159.011
8159.012
CO2 cylinder - 2.0 kg (4.4 lbs.) _____________ 123.30
Theben-Timer 7080 _________________________ 20.30
Singlecontroller _____________________________ 42.87
Cable 1,2m Multicontroller ___________________ 11.55
Y adapter __________________________________ 34.71
Photo-electric cell __________________________ 10.93
Pump adapter ______________________________ 69.33
Multicontroller _____________________________ 175.20
Cable clamp 3mm ___________________________ 1.15
Multicontroller _____________________________ 106.36
Motor block for 7180 ________________________ 58.12
Motor block for 7180/2 ______________________ 58.12
Transformer 12V/20VA ______________________ 27.39
Drive unit __________________________________ 18.74
Transformer 12V/20VA ______________________ 30.26
Turbelle® electronic ________________________ 139.31
Motor block ________________________________ 59.64
Button for driver _____________________________ 0.39
angle AL 80x40x15x2 ________________________ 1.75
Driver ______________________________________ 71.56
Turbelle® electronic ________________________ 139.31
O-ring seal red _______________________________ 1.01
Impeller _____________________________________ 4.03
Transformer (19)20V/65VA __________________ 52.50
Water level alarm __________________________ 125.63
T8 Osram Lumilux 11 - L 44 cm (17.3 in.),15W _ 8.35
T8 Osram Lumilux11 - L 120 cm (47.2 in.),36W 5.59
T8 Osram Lumilux11 - L 150 cm (59 in.), 58 W _ 9.35
T8 Osram blue 67 - L59 cm (23.3 in.), 18 W __ 11.88
T8 Osram blue 67 - L90 cm (35.4 in.), 30 W __ 11.88
T8 Osram blue 67 - L120 cm (47.2 in.), 36 W _ 11.88
T8 Osram blue 67 - L150 cm (59 in.), 58 W ___ 11.88
T12 Philips Aqua Coral,L120cm (47.2 in.),40W 24.29
T12 Philips Aqua Coral,L59cm (23.3 in.),40W _ 27.89
T12 Philips Aqua Coral,L150cm (59 in.),140W 35.11
HQI bulb 70W/D, 5,200 K, RX7s _____________ 37.80
HIT bulb 70W, 10,000 K, RX7s ______________ 75.94
HIT bulb 70W, blue, >15 K, RX7s ____________ 70.91
HQI bulb 150W/D, 5,200 K, RX7s ___________ 41.21
HIT bulb 150W, 10,000 K, RX7s _____________ 45.77
HIT bulb 150W, 14,000 K, RX7s _____________ 83.04
HIT bulb 150W, blue, >15K, RX7s ___________ 70.91
HQI bulb 250W/D, 5,200 K, Fc2/18 __________ 80.92
HIT bulb 250W, 10,000 K, Fc2/18 ___________ 52.52
HIT bulb 250W, 14,000 K, Fc2/18 ___________ 96.51
HQI bulb 250W, 10,000 K, E40 _____________ 101.25
HQI bulb 400W, blue, E40 __________________ 120.51
HIT bulb 400W, 10,000 K, E40 ______________ 140.80
T5 Osram Daylight - L 54.9 cm (21.6 in.),24W _ 7.18
T5 Osram Daylight - L 84.9 cm (33.4 in.),39W _ 7.18
T5 Osram Daylight - L 114.9 cm (45.2 in.),54W 7.54
T5 Osram Daylight - L 144.9 cm (57 in.),80W __ 8.56
T5 Narva blue 2 - L 54.9 cm (21.6 in.),24W ___ 22.93
T5 Narva blue 2 - L 84.9 cm (33.4 in.),39W ___ 25.50
T5 Narva blue 2 - L 114.9 cm (45.2 in.),54W __ 27.03
T5 Narva blue 2 - L 144.9 cm (57 in.),80W ___ 29.60
T8 reflector, tube L 44 cm (17.3 in.),15W ______ 7.69
T8 reflector, tube L 59 cm (23.2 in.),18W ______ 8.82
T12 reflector, tube L 59 cm (23.2 in.),40W ____ 9.85
T8 reflector, tube L 90 cm (35.4 in.),30W _____ 11.12
T8 reflector, tube L 120 cm (47.2 in.),36W ___ 12.44
T12 reflector, tube L 120 cm (47.2 in.),40W __ 14.72
T8 reflector, tube L 150 cm (59.06 in.),58W __ 14.86
2 tube brackets, diam. 26 mm (1.02 in.) _______ 3.20
T12 reflector, tube L 150 cm (59 in.),140W ___ 17.65
2 tube brackets, diam. 38 mm (1.49 in.) _______ 4.41
T5 reflector, tube L 54.9 cm (21.6 in.),24W ___ 10.95
2 tube brackets, diam. 16 mm (.62 in.) ________ 2.86
T5 reflector, tube L 144.9 cm (57.05 in.),80W _ 16.34
Ballast 70W for 140W _______________________ 22.19
Starter for 140 W tubes ______________________ 6.21
144.90
23.90
50.40
13.60
40.80
12.80
81.50
205.90
1.40
125.00
68.30
68.30
32.20
22.00
35.60
163.70
70.10
0.50
2.10
84.10
163.70
1.20
4.70
61.70
147.60
9.80
7.20
10.90
6.60
11.00
14.00
14.00
14.00
14.00
28.50
32.80
41.30
44.40
89.20
83.30
48.40
53.80
97.60
83.30
95.10
61.70
113.40
119.00
141.60
165.40
8.40
8.40
8.90
10.10
26.90
30.00
31.80
34.80
9.00
10.40
11.60
13.10
14.60
17.30
17.50
3.80
20.70
5.20
12.90
3.40
15.00
11.20
19.20
26.10
7.30
31
32
Art. No.
Designation
Price £ VAT 17.5%
8200.000
8201.000
8202.000
8203.000
8204.000
8205.000
8215.000
8218.000
8230.000
8236.000
8258.000
8322.000
8323.000
8325.000
8328.000
8441.100
8441.350
8441.400
8460.000
8465.000
8470.000
8480.000
8480.002
8480.004
8490.000
8512.100
8515.000
8515.070
8515.080
8515.120
8515.500
8515.520
8515.701
8515.702
8522.100
8522.120
8532.010
8532.020
8532.021
8532.030
8532.040
8532.050
8532.060
8532.070
8532.080
8532.090
8533.000
8533.100
8550.000
8550.010
8550.020
8550.090
8550.100
8550.120
8550.501
8550.510
8550.520
8550.530
8550.600
8550.602
8552.500
8552.520
8554.520
8555.000
8555.100
8555.200
8556.000
8557.000
9002.000
9002.030
9002.100
9002.250
9002.400
9005.015
9005.040
Electronic starter 8 - 65 W __________________ 13.08
Screw connection - diam. 26 mm (1.02 in.) ____ 4.01
Screw connection - diam. 38 mm (1.49 in.) ____ 3.27
Screw connection - diam. 16 mm (.62 in.) _____ 3.27
Starter Sti 20W ______________________________ 2.87
Socket f.tube ø26mm ________________________ 6.60
T8 built-in illuminator - (21.2 in.), 2x15 W _____ 66.44
T8 built-in illuminator -(50.3 in.), 2x36 W ____ 100.80
T8-Built-in illuminator - (62.2 in.), 2x58 W _____ 98.94
T5 built-in illuminator - (31.4 in.), 2x24 W ____ 118.17
Canopy black _______________________________ 2.53
Holding dev.f. 8460/-65/-70/-80/-90 ___________ 33.63
Rope for lamp,2m ___________________________ 2.53
Lamp - Design 8460 _______________________ 338.61
Lamp - Design 8465 _______________________ 420.95
Lamp - Design 8470 _______________________ 789.54
Lamp - Extension 8480 _____________________ 777.08
External Controller 250W,230V/50Hz ________ 231.08
External Controller 400W,230V/50Hz ________ 253.24
Lamp - Extension 8490 _____________________ 805.72
Carbon / sediment filter S ___________________ 19.75
Nano RO station ____________________________ 74.67
Preliminary filter with O-ring seal ______________ 9.17
Carbon Block O-ring seal _____________________ 2.29
Carbon Block Filter __________________________ 6.67
Thin-film composite membrane ______________ 43.15
Capillary for 8515 ___________________________ 11.99
Metric adapter _______________________________ 6.57
Angle for RO tube ___________________________ 4.49
Sediment fine filter L ________________________ 10.39
Carbon sediment filter 5µm ___________________ 7.76
1/4" nylon nipple _____________________________ 3.58
1/4 in. elbow for reverse osmosis hose ________ 3.61
Clamp for RO connection ____________________ 1.01
1/8 in. elbow for reverse osmosis hose ________ 4.04
1/8 in. junction for hose 6.3 mm (.24 in.). ______ 4.49
Pressure gauge 1/8" ________________________ 11.19
Screw 3,2x17mm Kogapur ____________________ 0.20
O-ring seal for membrane housing ____________ 2.06
O-ring seal for filter housing __________________ 3.54
1/4" - 1/8" nylon nipple _______________________ 3.17
RO TDS Monitor ____________________________ 58.35
T-piece _____________________________________ 5.78
RO station. _______________________________ 145.73
Wrench for 8550 _____________________________ 4.49
1/4 in. junction for reverse osmosis hose ______ 3.32
1/4" connector with RO pipe __________________ 4.73
Carbon sediment filter .5 µm _________________ 9.38
Sediment filter 20 µm ________________________ 6.65
Mixed Bed Ion Exchanger ___________________ 14.03
Spare membrane for 8550 ___________________ 61.56
Capillary 25% rate 60S/M/L _________________ 7.91
Capillary for 8550 ____________________________ 4.18
RO Ion Exchanger __________________________ 35.13
Clip for 8550.600 ____________________________ 5.25
Membrane Kogapur
90S/M/L ______________ 74.21
Capillary 25% rate 90S/M/L __________________ 7.91
Capillary 25% rate 150/M/L _________________ 7.91
RO water controller ________________________ 128.35
Controller 8555 _____________________________ 59.08
Water valve ________________________________ 54.11
Reverse osmosis pressure hose /1m __________ 2.56
3/4 in. screw connection ____________________ 11.50
DOC Skimmer 9002 _________________________ 98.54
Upper lid ____________________________________ 6.09
Housing for 9002 ___________________________ 34.21
Nano holder _________________________________ 7.77
Outlet pipe with nozzle ______________________ 10.08
Motor block ________________________________ 36.98
Hydrofoamer ______________________________ 103.00
15.40
4.70
3.80
3.80
3.40
7.80
78.10
78.60
99.70
118.40
116.30
138.80
144.80
154.10
232.90
3.00
39.50
3.00
397.90
494.60
927.70
913.10
271.50
297.60
946.70
23.20
87.70
10.80
2.70
7.80
50.70
14.10
7.70
5.30
12.20
9.10
4.20
4.20
1.20
4.70
5.30
13.10
0.20
2.40
4.20
3.70
68.60
6.80
171.20
5.30
3.90
5.60
11.00
7.80
16.50
72.30
9.30
4.90
41.30
6.20
87.20
9.30
9.30
150.80
69.40
63.60
3.00
13.50
115.80
7.20
40.20
9.10
11.80
43.50
121.00
Art. No.
Designation
Price £ VAT 17.5%
9005.140
9005.400
9006.000
9006.015
9006.040
9010.015
9010.040
9010.100
9010.200
9010.300
9010.350
9010.360
9010.400
9010.700
9011.000
9011.015
9011.040
9015.140
9016.000
9020.140
9021.000
9206.000
9211.000
9400.040
9400.041
9400.042
9400.043
9400.046
9400.047
9400.048
9410.000
9410.040
9410.041
9410.047
9410.048
9410.200
9410.241
9410.250
9410.300
9410.400
9410.500
9420.000
9420.040
9420.041
9420.042
9420.043
9420.045
9420.046
9420.047
9420.048
9420.211
9420.231
9420.241
9420.250
9420.260
9420.300
9420.380
9420.400
9440.000
9440.300
9460.000
9460.211
9460.231
9460.241
9460.250
9460.300
9480.000
9480.300
END
Skimmer cup _______________________________ 36.10
DOC skimmer extension set ________________ 33.39
DOC Skimmer 9006. _______________________ 176.49
Motor block ________________________________ 36.98
Hydrofoamer ______________________________ 103.00
Motor block ________________________________ 67.10
Hydrofoamer ______________________________ 128.40
Housing ____________________________________ 79.15
Cover for aspirator ___________________________ 7.26
Cover with sliding cover ______________________ 7.66
Cap with cover ______________________________ 3.35
Air regulator screw M8 _______________________ 1.40
Sleeve below cover __________________________ 7.26
Tube with bushing __________________________ 15.24
DOC Skimmer 9011. _______________________ 225.04
Motor block ________________________________ 67.10
Hydrofoamer e-jet _________________________ 128.40
Skimmer cup _______________________________ 76.62
DOC Skimmer 9016. _______________________ 300.56
Foam extraction unit ________________________ 69.18
DOC Skimmer 9021. _______________________ 377.63
DOC Skimmer 9206. _______________________ 176.49
DOC Skimmer 9211. _______________________ 223.50
Hydrofoamer ______________________________ 185.22
Motor block with O ring seal ________________ 110.05
Cover with O ring seal and nozzle ___________ 11.17
Pump housing ______________________________ 22.22
Ceramic shaft with holder ____________________ 3.82
Complete drive unit with shaft _______________ 26.19
DOC Skimmer 9410 ________________________ 254.50
Hydrofoamer Silence ________________________ 98.64
Motor block with screw _____________________ 60.07
Drive unit with bearing. _____________________ 14.37
Post-filter bag _______________________________ 9.75
Housing ____________________________________ 73.60
Disc ________________________________________ 9.71
Outlet pipe155mm (6.1 in.) ___________________ 3.58
Adapter ring for 9410. ________________________ 2.10
Post-filter __________________________________ 21.27
Master DOC Skimmer 9420.000 ____________ 535.16
Hydrofoamer Silence _______________________ 121.76
Motor block with screw _____________________ 68.78
Cover with O ring seal and nozzle ___________ 11.19
Screw for Motor block ________________________ 0.50
Hose clip ____________________________________ 3.49
Cooling duct ________________________________ 2.66
Skimmer cup _______________________________ 89.64
Skimmer cup lid ____________________________ 55.49
Housing ___________________________________ 147.06
Disc _______________________________________ 13.38
Angle 90 deg. _______________________________ 7.25
Outlet pipe 220 mm (9 in.) ____________________ 3.58
Outlet fleece, 1 ea. __________________________ 2.93
Booster-Ring ________________________________ 2.10
Master DOC Skimmer 9440.000 ____________ 656.92
Outlet pipe 120 mm (4.7 in.) __________________ 3.14
Master DOC Skimmer 9460.000 ___________ 1228.19
Skimmer cup ______________________________ 275.13
Skimmer cup lid ____________________________ 80.59
Housing ___________________________________ 475.58
Disc _______________________________________ 25.70
Outlet pipe 280 mm (11 in.) ___________________ 5.36
Master DOC Skimmer 9480.000 ___________ 1349.95
Outlet pipe 240 mm (9.4 in.) __________________ 3.73
42.40
39.20
207.40
43.50
121.00
78.80
150.90
93.00
8.50
9.00
3.90
1.60
8.50
17.90
264.40
78.80
150.90
90.00
353.20
81.30
443.70
207.40
262.60
217.60
129.30
13.10
26.10
4.50
30.80
8.40
299.00
115.90
70.60
16.90
8.40
11.50
86.50
11.40
4.20
2.50
25.00
628.80
143.10
80.80
13.10
0.60
4.10
3.10
21.20
8.40
105.30
65.20
172.80
15.70
8.50
4.20
3.40
2.50
771.90
3.70
1443.10
323.30
94.70
558.80
30.20
6.30
1586.20
4.40

Spare parts catalogue with prices

Transcription

Similar documents

Spare parts catalog with prices

Seekadett - S.M.S. Hansa

Pot-washing machines

klick