Spare parts catalog with prices

Transcription

0091.000_A
Spare parts catalog
with prices
For USA
TUNZE USA LLC
305 Victor St
Austin TX 78753 - phone (512) 833-7546
fax (512) 832-6082 - www.tunze.com
For Canada
XENIA NORTH AMERICA INC.
6417 Papineau - Montreal
Quebec H26 2X1 - phone (514) 721 7445
fax (514) 722 3679 - www.tunze.com
$
Nominal charge
US $ 2.54
02/2010
Content
Designation
Page
Spare parts illustrations _______________________________________________ 3 - 26
Turbelle ® powerhead / electronic __________________________________________ 3
Turbelle ® Maintenance instructions _______________________________________ 4 - 5
Turbelle ® electronic
< 2000 ____________________________________________ 6
Turbelle ® Maintenance instructions
Turbelle ® stream
< 2000 _______________________________ 7 - 9
old model ___________________________________________ 10
Wavebox _____________________________________________________________ 11
Turbelle ® nanostream® / stream _________________________________________ 12
Turbelle ® classic 2002 / 4002 ____________________________________________ 13
Comline Filter _________________________________________________________ 14
Comline DOC Skimmer _________________________________________________ 15
Classic DOC Skimmer __________________________________________________ 16
Nano DOC Skimmer / Nano cleaner / Nano pump ____________________________ 17
Automatic skimmer
< 2004 _________________________________________ 18 - 19
Comline Automatic skimmer
<2004 __________________________________ 20-21
Comline Calcium Automat ______________________________________________ 22
Osmolator Universal ____________________________________________________ 22
Turbelle ® stream II > 2008 ______________________________________________ 23
TUNZE SYSTEM ____________________________________________________ 24-25
Kogapur______________________________________________________________ 26
Total price list ______________________________________________________ 27- 32
2
powerhead / electronic
for all Turbelle® electronic > 2000
3
Wartungsanleitung • Maintenance Instructions • Notice d’entretien
powerhead 600/2, 1000/2, 1600/2, 3000/2, 800/2, 1200/2, 220.04, 230.04, 3115.04
electronic 7200/2, 7300/2, 7400/2, 7100/2,240.04
Das Zerlegen wird anhand einer Turbelle ® 3000/2 gezeigt. Da alle powerhead den gleichen Aufbau besitzen gilt sie für alle Turbellen
Zerlegen der Pumpe (siehe Bild 1 - 3)
Bild 1 Gehäuseklammern (1), falls vorhanden, mit kräftigem Daumendruck nach außen von Motor- und Kreiselgehäuserand abdrücken.
Bild 2 Kreiselgehäuse (1) im Uhrzeigersinn bis Haltenase (3) drehen, dann vom Motorblock (2) nach unten abnehmen.
Bild 3 Antriebseinheit (1) mit Kreisel (2) im Uhrzeigersinn drehend herausziehen.
Vorsicht Bruchgefahr! Keramik-Magnetrotor ist stoß- und bruchempfindlich und zieht durch seine Magnetwirkung nach innen =
Schnapp-Effekt. Deshalb behutsam herausnehmen.
Zerlegen der Antriebseinheit (siehe Bild 4 -7)
Bild 4 Verriegelungsfeder (1) der Antriebswelle (2) zusammendrücken und gleichzeitig Kreisel (3) anheben und entnehmen. Im Normalfall
genügt ein mehrmaliges Durchspülen unter dem Wasserhahn.
Nur im Reparaturfall (sichtbare Verschleißschäden) auseinander nehmen!
Bild 5 Im Reparaturfall Antriebseinheit zerlegen, dazu Magnetrotor (1) festhalten und Antriebswelle (2) gegen Uhrzeigersinn drehen über
den Widerstand des Rastpunktes, dabei schieben sich die Bremsbacken (4) seitlich aus dem Gehäuse und können so von Hand
herausgezogen werden. Lagerring (3) bei Bedarf mit dem Fingernagel vom Gehäuse der Antriebswelle (2) abziehen.
Bild 6 Inneres Rotorlager (1) im Reparaturfall am besten mit einer Holzschraube 4,5x60mm (2) oder einem Drahthaken herausziehen.
Bild 7 Lagerbuchse (3) im Reparaturfall mit Schraubendreherklinge aushebeln.
Kontrollieren Sie alle Teile auf evtl. Verschleißerscheinungen. Der Austausch eines Teiles für ein paar Mark, kann einen größeren Schaden
an Ihrer Turbelle ® verhindern. Der Zusammenbau erfolgt, soweit nicht anders vermerkt sinngemäß in umgekehrter Reihenfolge.
The disassembly will be demonstrated by means of a Turbelle® 3000.
As all Turbelle® powerhead units have the same construction, these maintenance instructions shall be applicable for all Turbelle®
Dismantling the pump (cf. Figs 1 – 3)
Fig. 1 Press the housing clamps, if fitted, away from motor and housing edge with strong pressure of your thumbs.
Fig. 2 Turn impeller housing clockwise to retaining nose (3), then remove motor block (2) downwards.
Fig. 3 Draw out drive unit (1) with impeller (2) clockwise.
Caution: Danger of breakage ! Ceramic magnetic rotor is sensitive to blows and breakage and through its magnet effect pulls
inwards = snap effect. Therefore, remove carefully.
Dismantling the drive unit (cf. Figs. 4 – 7)
Fig. 4 Press together locking spring (1) of the drive shaft (2) and lift the impeller (3) at the same time. Normally rinsing a few times under
the tap is sufficient.
Dismantle only in the case of repair (visible signs of wear).
Fig. 5 In the case of repair dismantle drive unit: to this end hold magnetic rotor (1) tight and turn drive shaft (2) anticlockwise through the
resistance of the latching point, at the same time the brake shoes (4) slide out of the side of the housing and may be removed by hand. As
and when necessary draw off bearing ring (3) from the housing of the drive shaft (2) with your finger nail.
Fig. 6 Using a wood screw 4.5 x 60 mm (2) or a wire hook, draw out inner rotor bearing (1) in the case of a repair.
Fig. 7 Lift out bearing bush (3) with screwdriver blade in case of repair.
Check all parts for any wear. The replacement of an inexpensive part may prevent a larger damage on your Turbelle ®.If nothing to the
contrary has been indicated, the assembly is carried out in reverse sequence.
Cette opération de démontage est simulée avec une Turbelle 3000. Etant donné que la conception de toutes les pompes Turbelle Powerhead
est similaire, ces indications comptent pour toutes les Turbelle®
Démontage de la pompe (voir vues 1 à 3)
Vue 1 S’ils sont utilisés, détachez les clips de verrouillage (1) par une forte pression des doigts sur les ergots et vers l’extérieur de la chambre
de turbine.
Vue 2 Tournez la chambre de turbine (1) dans le sens horaire jusqu’à l’ergot de maintien (3) puis séparez-là du bloc-moteur (2).
Vue 3 Extrayez l’ensemble mobile (1) et sa turbine (2) en effectuant une légère rotation dans le sens horaire.
Attention, risques de bris ! Le magnéto-rotor en céramique est sensible aux chocs. Sa puissance magnétique développe une forte
attraction vers le bloc-moteur et implique une extraction avec précaution.
Démontage de la partie mobile (voir vues 4 à 7)
Vue 4 En règle générale, un rinçage minutieux à l’eau courante est suffisant. Ne séparez les pièces qu’en cas de nécessité absolue de
réparation (traces d’usure nettement visibles) !
Si nécessaire, appuyez la lame de verrouillage (1) située sur l’arbre d’entraînement (2) tout en saisissant et en détachant la turbine (3).
Vue 5 Si nécessaire, le démontez la partie mobile. Pour cela, maintenez le magnéto-rotor (1) et tournez l’arbre d’entraînement (2) dans
le sens anti-horaire au-delà de son point de résistance : les mâchoires de freinage (4) se présentent hors de leur logement et peuvent en
être extraites. Si nécessaire, détachez le palier (3) du logement de l’arbre d’entraînement (2) à l’aide de l’ongle.
Vue 6 Si nécessaire, extrayez le palier de rotor intérieur (1) par une rotation à l’aide d’une vis à bois de 4,5 X 60 mm (2) ou à l’aide d’une
vrille.
Vue 7 Si nécessaire, démontez le palier principal (3) à l’aide d’un petit tournevis.
Contrôlez attentivement chaque pièce, son degré d’usure et d’encrassement. Pour une somme modique, l’échange éventuel d’une pièce
peut éviter la destruction de votre Turbelle ®. Le remontage de la pompe obéit tout simplement à l’ordre inverse au démontage.
4
Zerlegen der Pumpe • Dismantling the pump • Démontage de la pompe
Zerlegen der Antriebseinheit • Dismantling the drive unit • Démontage de la partie mobile
3000.07
5
powerhead / electronic < 07/2000
240.01
7240.01
7410.12
Turbelle ® powerhead
602
602.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
602.12
700.13
603
602.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
602.12
700.13
3000.78
1002
1002.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1002.12
1500.13
1002.15
3000.78
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
1001.77
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
1003
1002.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1002.12
1500.13
1002.15
1500
1500.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1500.12
1500.13
1501
1500.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
1500.12
1500.13
3000
3000.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
3000.12
3000.13
3000.78
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
3001
3000.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
3000.12
3000.13
1200
1200.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
1201.13
1201
1200.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
1201.03
235.02
235.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
235.12
235.13
3000.78
1200.15 1200.15
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
802
802.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
1201.13
1200.15
104.79
3060.40
3060.41
3060.42
3060.50
3000.14
Teileliste
803
233.02 Turbelle® powerhead
802.01 233.01 Motorblock 230V-50Hz
3000.02 3000.02 O-Ring
3000.03 3000.03 Kühlkanal
3000.04 3000.04 Lager oben
3000.05 3000.05 Magnetrotor
3000.07 3000.07 Antriebswelle
3000.08 3000.08 Bremsbacken 2 Stück
3000.30 3000.30 SET (3000.07 + 3000.08)
3000.09 3000.09 Lagerschale mit Bremsring
3 0 0 0 . 0 9 2 3 0 0 0 . 0 9 2 Bremsring
3000.10 3000.10 Lagerbuchse V4A
3000.40 3000.40 SET (3000.09 + 3000.10)
3000.11 3000.11 Klemmring
233.12 233.12 Kreisel
1201.03 233.13 Kreiselgehäuse
Adapter
Rohrmuffe
1200.15
Muffe für Schlauchanschluß
Schlitzkörper
Halter
Saughalter mit 3060.42
Sauger 3 Stück
SET (3060.40 + 3060.41)
Rahmenhalterung.
Stömungswinkel
Partslist
Turbelle® powerhead
Engine block 230V-50Hz
O-ring
Coolling duct
Upper bearing
Magnetic rotor
Drive shaft
Breakshoes 2 pcs.
SET (3000.07 + 3000.08)
Breakshell with break ring
Breaik ring
Bearingbush V4A
SET (3000.09 + 3000.10)
Clampring
Impeller
Impeller housing
Adaptor
Connecting sleeve
Sleeve for hose connection
Strainer
Holder
Suction holder with 3060.42
Suction 3 pcs.
SET (3060.40 + 3060.41)
Frame holding device
Folow deflector
Liste de piéce de rec
Turbelle® powerhead
Bloc moteur 230V- 50Hz
bague torique
canal de refroidissement
Palier Supérier
Induit magnétique
Arbremenant
Mâchoires 2 piéc.
SET (3000.07 + 3000.08)
Coquille de coussinet de frein.
Anneau au freiner
Coussinet V4A
SET (3000.09 + 3000.10)
Bague de serrage
Rotor
Carter du rotor
Ajutage
Manchon de tuyau
Manchon pour raccord tuyau
Tube fendu
Fixation
Support a vent. avec 3060.42
Support 3 piéc.
SET (3060.40 + 3060.41)
Fixation du cadre
Cône d’ecoulement
Turbelle ® electronic
7240
7241
7180
7181
240.02
7240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
7410.12
7240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
7410.12
3000.13
7180.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
7410.12
1201.13
3000.13
1200.15
1282.15
240.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
3000.13
7180.01
3000.02
3000.03
3000.04
3000.05
3000.07
3000.08
3000.30
3000.09
3000.092
3000.10
3000.40
3000.11
233.12
7410.12
1201.13
3000.13
1200.15
1282.15
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
3000.78
1001.79
3060.40
3060.41
3060.42
3060.50
3000.14
4002.77
6
235.13
Turbelle ® electronic Pumpe
Motorblock 24V
O-Ring
Kühlkanal
Lager oben
Magnetrotor
Antriebswelle
Bremsbacken 2 Stück
SET (3000.07 + 3000.08)
Lagerschale mit Bremsring
Bremsring
Lagerbuchse V4A
SET (3000.09 + 3000.10)
Klemmring
Kreisel
Kreisel
Kreiselgehäuse
Kreiselgehäuse
Muffe ø 25mm für 1201.13
Muffe ø 25mm für 1282.13
Muffe
Schlitzkörper
Halter
Saughalter
Sauger 3 Stück
SET (3060.40 + 3060.41)
Rahmenhalterung
Stömungswinkel
Turbelle ® electronic pump
Motor block 24V
O-ring seal
Cooling duct
Upper bearing
Magnetic rotor
Drive shaft
Brake shoes (2 items)
SET (3000.07 + 3000.08)
Bearing shell with brake ring
Brake ring
Bearing bush V4A
SET (3000.09 + 3000.10)
Clamping ring
Impeller
Impeller
Impeller housing
Impeller housing
Sleeve ø25mm 1201.13
Sleeve ø25mm 1282.13
Sleeve
Strainer
Holding device
Suction cup unit
Suction cup (3 pcs.)
SET (3060.40 + 3060.41)
Frame holding device
Flow deflector
Turbelle ® electronic pompe
Bloc moteur 24V
Bague torique
Canal de refroidissement
Palier supérieur
Induit magnétique
Arbre d'entraînement
Mâchoires (2 piéces)
SET (3000.07 + 3000.08)
Coquille de coussinet a. baague de r.
Anneau au freiner
Coussinet V4A
SET (3000.09 + 3000.10)
Bague de serrage
Rotor
Rotor
Carter du rotor
Carter du rotor
Manchon ø25mm pour 1201.13
Manchon ø25mm pour 1282.13
Manchon
Tube fendu
Fixation
Support à ventouses
Ventouses (3 pièces)
SET (3060.40 + 3060.41)
Fixation du cadre
Cône d’ecoulement
Wartungsanleitung • Maintenance Instructions • Notice d’entretien
powerhead 602/603, 1002/1003, 1500/1501, 3000/3001, 802/803, 1200/1201, 233.02, 235.02
electronic 7210P/7211P, 7310P/7311P, 7410P/7411P, 7110U/7111U,240.02
Das Zerlegen wird anhand einer Turbelle ® 3000 gezeigt. Da alle powerhead den
gleichen Aufbau besitzen gilt sie für alle Turbelle®
The disassembly will be demonstrated by means of a Turbelle® 3000.
As all Turbelle® powerhead units have the same construction, these maintenance
instructions shall be applicable for all Turbelle®
Cette opération de démontage est simulée avec une Turbelle 3000. Etant donné
que la conception de toutes les pompes Turbelle Powerhead est similaire, ces
indications comptent pour toutes les Turbelle®
Drehen Sie das Kreiselgehäuse soweit gegen den Uhrzeigersinn, bis es sich nach
unten abziehen läßt.
Turn the impeller housing clockwise until it can be pulled off to the bottom.
Tournez la chambre de turbine en sens anti-horaire jusqu’à son détachement de
la pompe.
Nehmen Sie das Kreiselgehäuse vom Pumpenkopf ab.
Remove the impeller housing from the pump head.
Déposez la chambre de turbine.
Drücken Sie die Verriegelungsfeder der Antriebswelle (3000.07) zusammen, und
hebeln Sie den Kreisel ab (Schraubenzieher).
Press the locking spring of the drive shaft (3000.07) together and lift the impeller
off (screw-driver).
Appuyez sur la lame de ressort se situant sur l’arbre d’entraînement (3000.07) et
détachez la turbine en faisant levier avec un petit tournevis.
3000.07
7
Drücken Sie den Klemmring (3000.11) zusammen, und entnehmen Sie ihn aus
seiner Führung.
Press the clamping ring (3000.11) together and remove it from its guideway.
3000.05
Pincez la bague de serrage (3000.11) de manière à pouvoir l’extraire de son
logement.
Ziehen sie die Antriebswelle (3000.07) und Lagerschale (3000.09) aus dem
Pumpenkopf. Achten Sie beim Wiedereinsetzten auf die richtige Position der
Rastnut.
3000.09
3000.07
Pull the drive shaft (3000.07) and the bearing shell (3000.09) out of the pump head.
In assembly, please observe the right position of the snap-in groove.
Tirez l’arbre d’entraînement (3000.07) de manière à sortir l’arbre et l’ensemble
coquille de freinage (3000.09) de la pompe. Lors de la mise en place, veillez à bien
positionner le téton détromper.
Ziehen Sie die Antriebswelle (3000.07) aus der Lagerschale (3000.09).
Pull the drive shaft (3000.07) out of the bearing shell (3000.09).
09
3000.
7
3000.0
Séparez l’arbre d’entraînement (3000.07) de la coquille de freinage (3000.09).
3000.08
Bremsbacken (3000.08) an der schmalen Seite nach außen ziehen und entnehmen (oben). Zum Einsetzen die Bremsbacken mit der breiten Seite einhängen, und
die schmale nach innen einrasten (unten).
Pull the brake shoe (3000.08) to the outside at the narrow part, and remove it
(upwards). For assembly, attach the brake shoe on the broad side and permit the
narrow part to snap in (bottom).
En les saisissant sur leurs parties les plus fines, sortez les mâchoires de freins
(3000.08) (en haut). Pour la remise en place des mâchoires, enclipsez tout d’abord
la partie large puis introduisez la partie la plus fine (en bas).
8
Den Bremsring (3000.092) nur wenn Schäden erkennbar sind, aus der Lagerschale
(3000.09) herausziehen.
3000.09
30
00
.0
92
Pull the brake ring (3000.092) out of the bearing shell (3000.09) only, if damage is
visible.
Seulement s’il possible de constater une détérioration, sortez la garniture de
freinage (3000.092) de la coquille de freinage (3000.09).
Hebeln Sie den Kühlkanal (3000.03) aus dem Pumpenkopf. Ziehen Sie den
Magnetrotor mittels des Kühlkanales vollständig aus seiner Führung.
Prize off the cooling duct (3000.03) from the pump head. Use the cooling duct to
pull the magnetic rotor out of the guideway completely.
3000.03
A l’aide d’un tournevis, extrayez le canal de refroidissement (3000.03) de la pompe.
Saisissez le rotor poussé par la translation du canal.
Nehmen Sie den Magnetrotor (3000.05) vom Kühlkanal (3000.03) und ziehen Sie das
obere Lager (3000.04) aus der Führung.
3000.05
Remove the magnetic rotor (3000.05) from the cooling duct (3000.03), and pull the
upper bearing (3000.04) from the guideway.
3000.04
Déposez le rotor (3000.05) de son canal de refroidissement (3000.03) et sortez le
palier supérieur (3000.04) de son logement.
3000.03
Kontrollieren Sie alle Teile auf evtl. Verschleißerscheinungen. Der Austausch eines
Teiles für ein paar Mark, kann einen größeren Schaden an Ihrer Turbelle ® verhindern.
Der Zusammenbau erfolgt, soweit nicht anders vermerkt sinngemäß in umgekehrter
Reihenfolge.
Check all parts for any wear. The replacement of an inexpensive part may prevent
a larger damage on your Turbelle ®.If nothing to the contrary has been indicated,
the assembly is carried out in reverse sequence.
Contrôlez attentivement chaque pièce, son degré d’usure et d’encrassement. Pour
une somme modique, l’échange éventuel d’une pièce peut éviter la destruction de
votre Turbelle ®. Le remontage de la pompe obéit tout simplement à l’ordre inverse
au démontage.
9
10
stream
old model
11
Wavebox 6212
nanostream®
stream
Turbelle® stream
6200
7240.27
1
2
3
6060
6060
6080
6080
6000
6100.10
7240.27
7210.202
6100
6100.10
7240.27
7410.602
6200
6200.10
7240.27
6200.80
all other parts see Turbelle® stream new model
6200.10
6200.80
12
Turbelle® stream
Pumpe Pump
Pompe
Treiber Driver
Driver
Trafo
Transformer Transformateur
(1)
(1)
Teileliste
4002.06
10
3000.78
1001.80
2002.71
Z11
4002.77
Z5
Z6
Z10
7082
Z4
1001.78
708
Z9
851.41
Z2
Z3
1001.79
102.41
Z1
1001.76
4002.25
21
Z8
141.18
Z7
121.17
19
141.15
20
141.14
16
17
121.16
102.43
15
18
102.40
851.44
13
14
4002.131
4002.202
9b
12a
4002.203
9a
2002.10
4002.20
9
4002.13
4002.07
8
11
4002.12
12
4002.08
6
7
Motor 220V sealed with main cable (with 5a)
Rotor
4002.11 Motor 220V mit Kabel vergossen (mit 5a)
4002.22 Motoranker
2002.11
2002.22
5
5a
Motor bearing (2pcs.)
4002.26 Motorlager (2St.)
4002.26
Liste de pièces
Felt strip
(extra bestellen)
1001.80 T-Stück
3000.78 Rohrmuffe ø25/28
1001.78 Rohrmuffe ø21/25
1001.76 Rohrstück
1652.79 Schlitzkörper
2002.71 Bio-Anschuß
4002.77 Strömungswinkel
7082 powertimer mit Ebbe-Flut Steuerung
708 powertimer
851.41 Halter für TUNZE SYSTEM
102.41 Spannwinkel V4A
Zubehör
4002.25 Reparaturbeutel (1, 12, 16, 17)
141.18 Schraubstutzen
141.17 Kreisel
121.16 Kreiselgehäuse
141.16
141.15 Kreisellager
141.14 Lagerscheibe
102.43 Schraube V4A M6x12
851.44 Scheibe
102.40 Spannhalter V4A
4002.131 Ritzel mit Feder
4002.13 Welle (mit Ritzel 12a)
4002.10 Motorgehäuse
4002.202 Spannring
Mounting clamp V4A
Attache V4A
Manchon de tuyau ø25/28
Branchement en T
T piece
Manchon de tuyau ø21/25
Partie de tuyau
Crépine
Raccord bioZ7
Coue d'écoulem
powertimer av. créer un mouvement de marée
Connecting sleeve ø25/28
Connecting sleeve ø21/25
Tube
Strainer
Bio connection
Flow deflector
powertimer with high and low tide simulation
powertimer
Support pour TUNZE SYSTEM
powertimer
Holder for TUNZE SYSTEM
(commander séparément)
Cornière V4A
Accessoires
Set réparation (1, 12, 16, 17)
Reccord fileté
Rotor
Carter du rotor
Coussinet du rotor
Rondelle
Vis V4A M6x12
Disque
Universal bracket V4A
Accesories
Repair kit (1, 12, 16, 17)
Intake fitting
Impeller
Impeller housing
Impeller bearing
Thrust washer
Screw V4A M6x12
Disc
Roue avec ressort
Axe complet (avec 12a)
Pinion with spring
Boîtier moteur
Shaft set (with 12a)
Screw V2A M4x20
Motor housing
Anneau tendeur
Vis V2A M4x20
Clamping ring
(order separately)
Languette de feutre
Shaft housing (with 9a
10a,/ 19b)
0b)
4002.203 Filzstreifen
Traverse (2pièces
Collone d'axe (avec 19a
0a,/19b)
0b)
Motor bearer (2pcs.)
Rubber mount (4pcs.)
0a,/ 19b)
4002.20 Wellenrohr (mit 1
0b)
9a
Bouchon (10pièces
Pied caoutchouc (4pièces
Retainer (10pcs.)
Induit
Moteur 220V coulé avec câble (avec 5a)
Palier moteur (2pièces)
Ventilateur
Couvercle
Vis V2A M3x10
4002.07 Holm (2St.)
4002.12 Gummifuß (4St.)
4002.08 Knebel (10St.)
Lid
Fan
4
4002.09 Lüfter
2002.02
4002.09
4002.02 Deckel
List of Parts
Screw V2A M3x10
2
4002
3
104.19
2002
1
2002 / 4002
13
14
Filter 3166 / 3167
Bio-Hydro-Reactor 3179
15
DOC Skimmer
16
Classic DOC Skimmer
Nano DOC Skimmer / Nano cleaner / Nano pump
< 2008
< 2008
17
Abschäumer • Skimmer • Ecumeur
240/2*
240/3
233/2*
220/3
* Artikelnummer vom Vorgängermodell
* Order no. for previous model
b
d
c
230/2*
230/3
a
Teileliste • List of Parts • Liste de pieces
220/3
230/3
240/3
Abschäumer
1 220.04 1 230.04 2
240.04 3 Pumpe mit 9
2 233.66
230.66
240.67
Abschäumer-Oberteil
3 230.05
230.05
230.05
Scheibe
4 225.04
225.04
225.04
Unterteil
5 233.14
220.14
245.14
Schaumtopf ohne 6/7
6
245.13
Schaumzylinder
7 214.15
214.15
214.15
Schaumtopfdeckel
8 230.35
230.35
230.35
Düsenrohr
9 233.13
235.13
235.13
Kreiselgeh. mit 9A/9B
9a 233.135
235.135
235.135
Düse (weiß)
9b 233.165
230.165 230.165 Vordüse (braun)
10 230.49
230.49
230.49
Schalld. mit Lufts.
10a 235.484
235.484
235.484
Kappe
10b 230.491
230.491
230.491
Kappe
11 3130.36
3130.36
3130.36
Lufteinstellschraube
12 230.55
230.55
230.55
Konsole
13 230.25 4 230.25 4
230.25 4 2 Halter
13a 2x3000.22 2x3000.22 2x3000.22 Lochschiene
13b 2x3000.24 2x3000.24 2x3000.24 Klemmhalter
13c 2x3000.261 2x3000.261 2x3000.261 Verbindungsstück o. Ge.
13d 230.252
230.252
230.252
2 Schr.+2Mutt.M6x25 sw
13 233.12
235.12
235.12
Kreisel
14
7240.26 5 Treiber
15
7410.602 6 Transformator
18
Skimmer
Pump with 9
Skimmer casing
Disk
Skimmer body lower part
Skimmer cup wihtout 6/7
Cylinder
Skimmer lid
Pressure pipe
Impeller hous.with 9A/9B
Nozzle (white)
Pre-nozzle (brown)
Silencer with air hose
Cup
Cup
Air regulator screw
Pump support
2 Holder
Mounting Bar
Clamp holder
Plate without thread
2 screwM6x25 +2 nuts black
Impeller
Driver
Transformer
Ecumeur
Pompe avec 9
Boîtier
Disque
Partie inférieure
Godet d’ecumage sans 6/7
Cylindre
Couvercle de godet
Lance
Chambre de rotor avec 9A/9B
Buse (blanc)
Pré-buse (brun)
Silencieux av. tuy. souple d’air
Bouchon
Bouchon
Vis réglage d’air
Support de pompe
2 Support
Barre de montage
Attache
Plaque sans filets
2 viss M6x25+ 2 écrou noir
Turbine
Driver
Transformateur
Artikelnummer vom Vorgängermodell:
Order no. for previous model:
1
233.02
2
235.02
3
240.02
4
2x3000.14 + 2x102.45
5
240.24
6
7400.60
SYSTEM Abschäumer • Skimmer • Ecumeur
238/2*
225/3
235/2*
235/3
*Order no. for previous model
245/2*
245/3
{
s. Anleitung • see Instructions • v. mode d’emploi: Turbelle
Teileliste •
225/3
1 220.04 1
2 238.03
3 230.05
4 225.04
5 233.14
6
7 214.15
8 230.35
9 233.13
9a 233.135
9b 233.165
10 230.49
10a 235.484
10b 230.491
11 3130.36
12 230.55
13 233.12
14
15
List of Parts • Liste de pieces
235/3
245/3
Abschäumer
230.04 2 240.04 3 Pumpe mit 9
235.03
245.67
Abschäumer-Oberteil
230.05
230.05
Scheibe
225.04
225.04
Unterteil
220.14
245.14
Schaumtopf ohne 6/7
245.13
Schaumzylinder
214.15
214.15
Schaumtopfdeckel
230.35
230.35
Düsenrohr
235.13
235.13
Kreiselgeh. mit 9A/9B
235.135 235.135 Düse (weiß)
230.165 230.165 Vordüse (braun)
230.49
230.49
Schalld. mit Lufts.
235.484 235.484 Kappe
230.491 230.491 Kappe
3130.36 3130.36 Lufteinstellschraube
230.55
230.55
Konsole
235.12
235.12
Kreisel
7240.26 4 Treiber
7410.6025 Transformator
Skimmer
Pump with 9
Skimmer casing
Disk
Skimmer body lower part
Skimmer cup wihtout 6/7
Cylinder
Skimmer lid
Pressure pipe
Impeller hous.with 9A/9B
Nozzle (white)
Pre-nozzle (brown)
Silencer with air hose
Cup
Cup
Air regulator screw
Pump support
Impeller
Driver
Transformer
Ecumeur
Pompe avec 9
Boîter
Disque
Partie inférieure
Godet d’écumage sans 6/7
Cylindre
Couvercle de godet
Lance
Carter du rotor avec 9A/9B
Buse (blanc)
Pré-buse (brun)
Silencieux av. tuy. souple d’air
Bouchon
Bouchon
Vis réglage d’air
Support de pompe
Turbine
Driver
Transformateur
®
1
233.02
2
235.02
3
240.02
4
240.24
5
7400.60
19
3115*
3115/2
3116/2
3130*
3130/2
3131/2
b
d
c
a
Teileliste
3115/2
1 3115.04 1
2 235.13
2a 235.135
2b 230.165
3 233.12
4 3115.10
5 3130.482
6 3130.36
7 3115.20
8 3166.07
9 233.14
10 214.15
11 3130.25 3
11a 2x3000.22
11b 2x3000.24
11c 3130.251
11d 3130.252
• List of parts
3116/2
3130/2
3115.04 230.04 2
235.13
235.13
235.135 235.135
230.165 230.165
233.12
235.12
3116.10 3130.10
3130.482 3130.482
3130.36 3130.36
3115.20 3115.20
3166.07 3166.07
233.14
220.14
214.15
214.15
3130.25 3130.25
2x3000.22 2x3000.22
2x3000.24 2x3000.24
3130.251 3130.251
3130.252 3130.252
• Liste
3131/2
230.04
235.13
235.135
230.165
235.12
3131.10
3130.482
3130.36
3115.20
3166.07
220.14
214.15
3130.25 3
2x3000.22
2x3000.24
3130.251
3130.252
des pièces
Abschäumer-Automat
Ersatzpumpe mit 2 + 3
Kreiselgehäuse
Düse (weiß)
Vordüse (braun)
Kreisel
Gehäuse
2 Schläuche + Kappe
Deckel für Pumpenhalt.
Sicherungsplatte
Schaumtopf o. Deckel
Schaumtopfdeckel
Halter
Lochschiene
Klemmhalter
Schiebeteil rechts
Schiebeteil links
Automatic Skimmer
Pump with 2 + 3
Impeller housing
Nozzle (white)
Pre-nozzle (brown)
Impeller
Housing
2 hoses + cap
Air regulating screw
Cover for pump
Retaining plate
Skimmer cup without lid
Skimmer cup lid
Holder
Mounting Bar
Clamp holder
Sliding piece l/h
Sliding piece l/h
Ecumeur automat.
Pompe avec 2 + 3
Chambre turbine
Buse (blanc)
Pré-buse (brun)
Turbine
Boîtier
2 tuyaux + bouchon
Vis de réglage d’air
Couvercle de pompe
Plaque de maintien
Godet d’écumage
Couvercle de godet
Support
Barre de montage
Support
Attache droite
Attache gauche
1
3115.03
2
235.02
3
2x3000.14
{
20
®
3140*
3140/2
3160*
3160/2
b
d
c
a
Teileliste •
3140/2
1 240.04 1
2 7240.26 3
3 7410.602 4
4 235.13
4a 235.135
4b 230.165
5 235.12
6 3140.10
7 3130.482
8 3130.36
9 3115.20
10 3166.07
11 245.14
12 214.15
13 245.13
14 3130.25 5
14a 2x3000.22
14b 2x3000.24
14c 3130.251
14d 3130.252
List of parts • Liste des pièces
3160/2
Abschäumer-Automat
2x230.04 2
Ersatzpumpe mit 4 + 5
Treiber
Transformator
2x235.13
Kreiselgehäuse
2x235.135
Düse (weiß)
2x230.165
Vordüse (braun)
2x235.12
Kreisel
3160.10
Gehäuse
3160.48
2 Schläuche + Kappe
3160.36
2x3115.20
Deckel für Pumpenhalterung
2x3166.07
Sicherungsplatte
245.14
Schaumtopf ohne Deckel
214.15
Schaumtopfdeckel
3160.13
Schaumzylinder
3130.25 5
Halter
2x3000.22
Lochschiene
2x3000.24
Klemmhalter
3130.251
Schiebeteil rechts
3130.252
Schiebeteil links
Automatic Skimmer
Pump with 4 + 5
Driver
Transformer
Impeller housing
Nozzle (white)
Pre-nozzle (brown)
Impeller
Housing
2 hoses + cap
Air regulating screw
Cover for pump
Retaining plate
Skimmer cup without lid
Skimmer cup lid
Cylinder
Holder
Mounting Bar
Clamp holder
Sliding piece l/h
Sliding piece l/h
Ecumeur automatique
Pompe avec 4 + 5
Driver
Transformateur
Chambre turbine
Buse (blanc)
Pré-buse (brun)
Turbine
Boîtier
2 tuyaux + bouchon
Vis de réglage d’air
Couvercle de maintien
Plaque
Godet d’écumage sans couv.
Couvercle de godet
Réacteur rehaussé
Support
Barre de montage
Support
Attache droite
Attache gauche
1
240.02
2
235.02
3
7240.25
4
7400.60
5
3000.14
{
®
21
Calcium Automat 3170
Osmolator Universal 3155
22
23
stream II >2008
SYSTEM Schnellwechselfilter • Quick-Change Filters • Filtres à èchange rapide
851 / 852 + 851.76 / 851.76
Turbelle ® powerhead / electronic
Turbelle ® 601/1001 / 2002/4002
851.02.B
851.02.S
851.02.B
851.02.S
878.71
1060.71
3178.71
2002.71
->Catalog
1651 / 1652 + 1651.76
1651.02.B
1651.02.S
853 / 1653
1651.02.B
1651.02.S
852.02.B
852.02.S
(3000.02)
(1590.30)
Schnellwechsel-Filter
Quick-Change Filter
Filtre à échange rapide
Turbelle ®
Turbelle ® powerhead / electronic
Turbelle 2002/4002 + 851.42
-> Catalog
weitere Informationen siehe
other Informations see
d’autres informations voir
24
852/1652
878.71
1060.71
3178.71
2002.71
->Catalog
SYSTEM Bio-Reaktor • Bio-Reactor • Réacteur biologique
Hydorkultur-Reaktor • Hydroponic Reactor • Réacteur a hydroculture
876
1676
851.02.B
851.02.S
1651.02.B
1651.02.S
879
1679
25
KOGAPUR reverse osmosis
S-model
(11)
Reinwasserbehälter
Récipient
d'eau pure
(16)
blau
blue
bleu
Storage
container
(Z1)
(7)
(3)
(5)/(7)
(15)
Wasserabfluß
Drainage
Écoulement
(6)/(7)
(1)
gelb
yellow
jaune
Kaltwasser
3/4" Anschluß
ESO
(9)
Cold water
(4)/(7)
(12)
schwarz
black
noir
8510
(13)
3/4" connection
Eau froide
raccord 3/4"
(11)
(4)/(7)
(6)/(7)
(5)/(7)
M-model
Umrechnungstabelle psi - bar
50 psi - 3,3 bar
60 psi - 4,0 bar
70 psi - 4,6 bar
80 psi - 5,3 bar
90 psi - 6,0 bar
(8)
100 psi- 6,6 bar
L-model
(15) (16) (3)
(13)
(10)
(3)
(16)
(11)
(9)
(17)
(7)
(10)
(15)
(10)
(4)/(7)
8520
8522
(5)/
(7)
(13)
8530
8532
(1)
(4)/
(7)
(6)/(7)
(5)/(7)
(9)
(17)
(2)
(1)
8510
8512.100
8512
8512.100
8520
8522.120
8522
8522.120
8530
8522.120
8532
8522.120
8534
8522.120
Teileliste
Kohle/Sedimentfilter
LIst of parts
Carbonfilter
Liste de piéces
Carbonfilter
8550.500
8552.500
8550.500
8552.500
8522.100
8550.500
8522.100
8552.500
8522.100
8554.500
Feinfilter 1µm
Membrane
Speisewasser (schw.)
Filter 1µm
Membrane
Feed water (black)
Filtre 1µm
Membrane
eau purifée (noir)
pure water (blue)
drain water (yelow)
pressure hose (white)
eau purifée (bleu)
Eau de refus (jaune)
Tuyau pour (blanc)
1/4” transition
1/8” transition”
1/4” elbow”
1/4” transition
1/8” transition
1/4” angle
11 8532.030 8532.030 8532.030 8532.030 8532.030 8532.030 8532.030 Winkel 1/8”
12 8557.000 8557.000 8557.000 8557.000 8557.000 8557.000 8557.000 Verschraubung 3/4”
13 8532.050 8532.050 8532.050 8532.050 8532.050 8532.050 8532.050 Manometer
1/8” elbow”
3/4” nylon nipple
press. gauge
1/8” angle
3/4” nylon nipple
Manomètre
14 8532.060
15 8550.520
16 8532.070
1
2
3
4
5
6
7
8556.000
8556.000
8556.000
8556.000
8556.000
8556.000
8556.000
Reinwasser (blau)
Solewasser (gelb)
Druckschlauch (weiß)
8 8532.010
9 8532.040
10 8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
8532.010
8532.040
8532.020
Übergang 1/4”
Übergang 1/8”
Winkel 1/4”
8532.060
8552.520
8532.070
17
Z1 8540.000
26
(8)
(6)/
(7)
8540.000
8532.060
8550.520
8532.070
8532.060
8552.520
8532.070
8532.060
8550.520
8532.070
8532.060
8552.520
8532.070
8532.060
8554.520
8532.070
Schrauben 3,2x17
Kapilare 25% Rate
O-Ring
Screw 3,2x17
Capilary 25% rate
O-ring
Vis 3,2x17
Capilary 25% rate
O-ring
8532.080
8532.080
8532.080
8532.080
8532.080
8540.000
8540.000
8540.000
8540.000
O-ring
Access. (order sep.)
ESO Water level con.
O-ring
Access. (com. dep.)
8540.000
O-Ring
Zubehör (extra best.)
ESO Wasserst. Kontr.
Total price list with spare parts - US $
The deliveries are made in compliance with our respectively applicable terms of delivery and payment. Prices in US $
Valid as from February 01, 2010. Subject to alterations.
Kit
Art. No.
Designation
TS24
TS48
0015.000
0016.000
0018.000
0018.700
0021.000
0068.000
0075.000
0079.000
Turbelle® stream Kit TS24 _______________________ 981.19
Turbelle® stream Kit TS48 ______________________ 1673.20
Skimmer Kit 15 ________________________________ 808.35
Compact Kit 16 ________________________________ 1116.66
Compact Kit 18 _______________________________ 1852.85
Compact Kit 18.7 ______________________________ 2047.40
Compact Kit 21 ________________________________ 779.59
Calcium Dispenser Kit 68 ________________________ 347.49
Kit 75 _______________________________________ 1073.31
Kit 79 ________________________________________ 779.27
Net sales price $
Information media
0085.000_A
Saltwater Aquarium ______________________________ 16.00
0090.000
TUNZE catalogue - German / • ______________________ 3.81
0090.000_A
TUNZE catalogue - English / $US ____________________ 3.81
0090.000_C
TUNZE catalogue Spanish / • ________________________ 3.81
0090.000_E
TUNZE catalogue - English __________________________ 3.81
0090.000_F
TUNZE catalogue - French / • _______________________ 3.81
0090.000_G
TUNZE catalogue - English / £ _______________________ 3.81
0090.000_H
TUNZE catalogue - Hungarian / • ____________________ 3.81
0090.000_I
TUNZE catalogue - Italian / • ________________________ 3.81
0090.000_O
0090.000_R
TUNZE catalogue - Russian _________________________ 3.81
0090.000_S
0091.000
Spare parts catalogue - German / • ___________________ 2.54
0091.000_A
Spare parts catalogue - English / $US _________________ 2.54
0091.000_E
Spare parts catalogue - English / • ____________________ 2.54
0091.000_F
Spare parts catalogue - French / • ____________________ 2.54
0091.000_G
Spare parts catalogue - UK / £ _______________________ 2.54
0097.000
DVD: TUNZE Aquarientechnik GmbH _______________ 12.46
0097.500
DVD: TUNZE Introduces (PAL) _____________________ 12.46
0097.500_A
DVD: TUNZE Introduces NTSC ____________________ 13.03
0100/3_A
Aquarium Ecology, English ________________________ 21.98
Art.No.
0102.400
0102.404
0102.407
0102.410
0102.430
0102.450
0102.780
0104.150
0104.180
0104.190
0104.241
0104.250
0104.710
0104.720
0104.730
0104.740
0104.790
0106.170
0110.010
0110.030
0110.090
0110.114
0110.130
0110.140
0110.260
0121.130
0121.131
0121.160
0121.170
0141.140
0141.150
0141.160
0141.170
0141.180
0200.000
0210.040
0210.042
0210.044
Universal clamp V4A ____________________________ 18.06
Screw knob _______________________________________ 1.36
Disc _____________________________________________ 1.51
Mounting bracket ________________________________ 10.28
Screw M6x12 V4A _________________________________ 1.14
Mounting clamp _________________________________ 10.88
Connecting sleeve _________________________________ 2.10
Impeller bearing ___________________________________ 2.80
Screw connection __________________________________ 3.41
Screw M3x10 V2A _________________________________ 1.06
Clip _____________________________________________ 1.59
Repair kit ________________________________________ 7.69
Tangit, 125 g (4.4 oz.) tube __________________________ 9.85
Silicone, 75 ml (2.5 oz.) _____________________________ 9.43
Instant adhesive ___________________________________ 7.07
Coral Fix - 112 g (4 oz.) ___________________________ 12.56
Strainer, 7cm (2.7 in.) ______________________________ 7.96
Impeller __________________________________________ 8.89
Screw M4x6 PA ___________________________________ 1.24
Thermostat _______________________________________ 8.81
Fan _____________________________________________ 3.12
Wire protect.sleeve ________________________________ 2.09
Shaft with pinion ___________________________________ 6.65
Thrust washer ____________________________________ 2.51
Motor bearing ___________________________________ 16.29
Shaft with pinion _________________________________ 12.78
Shaft ____________________________________________ 6.52
Impeller housing _________________________________ 32.26
Impeller _________________________________________ 11.25
Thrust washer,2 pcs. ______________________________ 1.82
Impeller bearing,2pc _______________________________ 7.30
Impeller ________________________________________ 13.73
Intake fitting ____________________________________ 13.82
Nano Reefpack 200 _____________________________ 215.64
Replacement pump ______________________________ 48.58
Drive unit for 210.04 _______________________________ 9.40
Upper bearing 2pcs. for 210.04 _______________________ 2.72
Art. No.
Designation
Net sales price $
0210.045
0210.049
0210.165
0210.491
0214.150
0220.015
0220.040
0220.140
0220.400
0220.510
0220.521
0220.522
0220.526
0220.530
0220.540
0220.550
0220.558
0220.560
0220.568
0220.570
0220.571
0220.572
0220.700
0220.701
0220.702
0220.703
0220.704
0220.705
0220.706
0220.707
0220.708
0220.709
0220.710
0220.711
0225.040
0225.390
0225.460
0225.481.S
0230.015
0230.040
0230.050
0230.101
0230.165
0230.250
0230.252
0230.350
0230.490
0230.491
0230.550
0230.660
0231.020
0233.010
0233.120
0233.130
0233.135
0233.140
0233.165
0233.660
0235.010
0235.120
0235.130
0235.135
0235.140
0235.480
0235.481
0235.484
0240.010
0240.015
0240.020
0240.040
0240.484
0245.140
0300.000
0300.020
Impeller housing ___________________________________ 9.22
Suction cups 4 pcs. ________________________________ 4.37
Pre-nozzle ________________________________________ 9.40
Cup with 4,6mm hole _______________________________ 2.35
Skimmer cup lid _________________________________ 17.41
Motor block for 220.04 ____________________________ 68.91
Pump for skimmer ______________________________ 170.01
Skimmer cup ___________________________________ 59.58
Aquarium tongs _________________________________ 37.90
Protective gloves __________________________________ 7.30
Rough surface, 77 x 59 mm (3.0 x 2.3 in.) _____________ 2.94
Magnet. f. 220.55/54 _____________________________ 15.56
Pile fabric surface, 77 x 59 mm (3.03 x 2.3 in.) __________ 2.03
Power Magnet 220.53 ____________________________ 21.51
Power Magnet 220.54 ____________________________ 28.72
Power Magnet 220.55 ___________________________ 142.23
Felt on the outside, 77 x 59 mm (3.03 x 2.3 in.) _________ 4.68
Power Magnet 220.56 ___________________________ 265.67
Fleece for acrylic panes ____________________________ 1.74
Power Magnet 220.57 ___________________________ 569.62
Rough surface, 115 x 77 mm (4.5 x 3.0 in.) _____________ 7.11
Felt on the outside, 115 x 77 mm (4.5 x 3.03 in.) _______ 11.72
Cleaning set ____________________________________ 62.58
1/8" Brush ________________________________________ 5.75
1/4" Brush ________________________________________ 3.78
3/4" Brush ________________________________________ 4.09
Bottle brush ______________________________________ 5.75
Bristle brush ______________________________________ 2.72
TUNZE towel ___________________________________ 13.78
Pick tool _________________________________________ 3.94
Screwdriver _______________________________________ 8.33
Instructional DVD ________________________________ 10.14
Citric acid ________________________________________ 7.11
Squirt applicator ___________________________________ 4.24
Skimmer housing.low _____________________________ 21.75
Air hose _________________________________________ 1.86
Air pressure pipe __________________________________ 5.51
Cap f. silencer ____________________________________ 1.04
Motor block for 230.04 ___________________________ 121.80
Turbelle® Powerhead -> 9010.04 ___________________ 211.94
Disc ___________________________________________ 14.23
Screw M5x6mm, withe _____________________________ 2.13
Pre-nozzle ________________________________________ 9.40
Skimmer support ________________________________ 15.65
2 screw+2 nuts M6x25mm __________________________ 2.59
Pressure pipe _____________________________________ 3.09
Silencer w.air hose ________________________________ 11.90
Cup with 6,5mm hole _______________________________ 2.35
Pump support ___________________________________ 23.45
Skimmer casing _________________________________ 64.99
Return pump ____________________________________ 58.72
Motor block for 233.02 ____________________________ 77.28
Impeller ________________________________________ 10.81
Nozzle __________________________________________ 7.63
Skimmer cup w. over _____________________________ 53.62
Pre-nozzle ________________________________________ 9.04
Skimmer casing _________________________________ 54.15
Motor block for 235.02 ___________________________ 121.80
HP Impeller _____________________________________ 10.81
Nozzle __________________________________________ 7.95
2 clips ___________________________________________ 4.34
Silencer _________________________________________ 11.90
Cup H14, ø 26mm _________________________________ 1.67
Cap _____________________________________________ 1.67
Motor block for 240.02 ____________________________ 98.44
Motor block for 240.04 ____________________________ 98.44
Pump for skimmer ->240.04 ____________________ 293.87
Pump for skimmer ______________________________ 293.87
Reducing adaptor for hose __________________________ 1.32
Skimmer cup w. over _____________________________ 94.76
Cartridge filter 300 _______________________________ 13.88
Filter cartridges, 75 mm (2.9 in.), 10 pcs. ____________ 18.36
27
28
Art. No.
Designation
Net sales price $
0300.060
0305.120
0312.344
0320.000
0320.260
0320.280
0370.000
0390.040
0390.460
0505.000
0505.110
0505.120
0600.015
0602.120
0602.400
0605.000
0700.130
0800.000
0800.010
0800.015
0800.030
0800.040
0800.042
0800.043
0800.047
0800.048
0800.060
0800.070
0800.080
0800.140
0800.220
0802.010
0805.000
0805.015
0805.700
0808.100
0808.150
0820.000
0820.250
0820.260
0820.280
0820.290
0850.100.S
0850.250.S
0850.280.S
0851.020.S
0851.060
0851.100.S
0851.110
0851.180.S
0851.280.S
0851.290.S
0851.300.S
0851.320.S
0851.400.S
0851.440
0851.450.S
0851.760.S
0851.761.S
0870.000
0870.010
0870.020
0870.400.S
0870.900
0870.901
0870.950
0870.960
0871.000
0872.000
0872.010
0872.050
0873.000
0873.010
0875.900
0875.901
Stainer __________________________________________ 4.77
Rotor,shaft+bearing ______________________________ 10.45
Glue-in nipple for hose, diam. 9 mm (.35 in.) ____________ 1.27
Pot-type filter 320 ________________________________ 27.02
Strainer __________________________________________ 4.56
Pot for 320 _____________________________________ 14.77
Refillable cartridge 370 ___________________________ 17.41
Union for hose, diam. 6x9 mm (.23 x .35 in.) ___________ 1.09
Y branch _________________________________________ 5.40
Reefpack 505 __________________________________ 655.78
O-ring seal _______________________________________ 1.82
Rotor,shaft+bearing ______________________________ 10.75
Motor block _____________________________________ 43.85
Impeller __________________________________________ 6.65
Air draw nozzle _________________________________ 10.45
Riverpack 605. _________________________________ 378.79
Cartridge filter 800 _______________________________ 21.39
Filter cartridges,135 mm (5.3 in.), 5 pcs. _____________ 12.64
Motor block _____________________________________ 61.04
Carbon floss cartridge, 135 mm (5.3 in.), 1 pc. __________ 5.30
Nano pump _____________________________________ 48.58
Drive unit for 800.04 (50 Hz) _________________________ 9.45
Cover on impeller housing ___________________________ 6.18
Outlet pipe, diam. 13 mm (.51in.) _____________________ 3.71
Pump cover ______________________________________ 6.52
Strainer __________________________________________ 9.04
Screw cap for PAF _________________________________ 4.39
Bracket __________________________________________ 5.04
Foam cartridge ____________________________________ 4.24
Cartridge filter mat _________________________________ 2.85
Motor block for 802 ______________________________ 77.28
Turbelle® e-jet 805 ______________________________ 107.66
Motor block _____________________________________ 110.76
Drive unit ______________________________________ 30.34
TS mounting bar - 97 cm (38.1 in.) __________________ 21.15
TS mounting bars - .97 m (38.1 in.) / pack of 5 ________ 91.84
Pot-type filter 820 ________________________________ 36.29
Cover f. F320/820 _________________________________ 8.16
Strainer __________________________________________ 9.04
Pot for 820 _____________________________________ 20.72
Return stop _______________________________________ 2.53
TS bell compl. __________________________________ 31.38
Cover f. TS bell ___________________________________ 8.31
TS bell ________________________________________ 19.24
TS lid black _____________________________________ 16.09
Screw M 6x25 ____________________________________ 1.21
TS cover _______________________________________ 49.14
TS-cover with stage ______________________________ 20.94
TS screw connector ________________________________ 3.97
Overflow grid _____________________________________ 2.18
Cap _____________________________________________ 1.97
Grid with cap _____________________________________ 2.66
Adapter __________________________________________ 3.27
Holder for TS mounting bar ________________________ 12.13
Disc _____________________________________________ 1.29
TS heater&electrode holding device _________________ 14.24
Quick-change filter extension _______________________ 63.11
TS-Expansion box _______________________________ 38.28
Refillable Cartridge 870 ___________________________ 23.49
Bio cartidge _____________________________________ 13.73
Cover for 870/1670 ________________________________ 2.12
Cover with clip ____________________________________ 7.72
Filter Carbon ___________________________________ 68.65
Filter carbon ______________________________________ 7.45
Filter Carbon ___________________________________ 43.10
Filter Carbon __________________________________ 269.33
Wadding Refillable Cartridge 871 ___________________ 23.43
Micro wadding, 10 x 60 g (2.1 oz.) __________________ 37.97
Micro wadding, 60 g (2.1 oz.) ________________________ 4.21
Micro wadding, 5 kg (176 oz.) sack ________________ 122.27
Macro wadding, 10 x 250 g (8.8 oz.) ________________ 61.72
Macro wadding, 250 g (8.8 oz.) ______________________ 6.87
GRANOVIT _____________________________________ 28.64
GRANOVIT _______________________________________ 3.48
Art. No.
Designation
Net sales price $
0875.950
0875.960
0876.460.S
0878.100.S
0878.280.S
0878.710
0879.710.S
0879.711
0880.900
0880.901
0880.950
0880.960
0910.000
0920.000
0930.000
0940.000
0950.000
1000.015
1001.060
1001.102
1001.150
1001.160
1001.240
1001.250
1001.400
1001.740
1001.741
1001.760
1001.770
1001.780
1001.790
1001.800
1002.120
1002.150
1002.400
1005.000
1005.015
1005.120
1005.700
1073.000
1073.008
1073.020
1073.022
1073.023
1073.024
1073.025
1073.027
1073.040
1073.041
1073.042
1073.043
1073.044
1073.047
1073.082
1073.083
1073.084
1073.085
1073.087
1073.090
1073.091
1073.092
1073.093
1073.094
1073.095
1073.096
1073.142
1073.143
1073.162
1073.163
1073.500
1073.600
1074.100
1074.200
1074/2
1075.050
GRANOVIT _____________________________________ 18.36
GRANOVIT _____________________________________ 99.17
Branch connec.f.hose ______________________________ 4.81
Bio reactor box __________________________________ 33.27
Strainer bottom ___________________________________ 7.42
Bio connection for 805 ______________________________ 6.71
Bio tube _________________________________________ 3.19
Distribution nozzle _________________________________ 0.98
Calcium carbonate _______________________________ 44.78
Calcium carbonate _________________________________ 4.68
Calcium carbonate _______________________________ 27.01
Calcium Carbonate _____________________________ 120.39
Quickphos 750 ml (25 oz.) ________________________ 25.07
Silphos 750 ml (25.4 oz.) __________________________ 41.22
Zeolite 750 ml (25 oz.) ____________________________ 17.15
Carbophos 750 ml (25.3 oz.) _______________________ 22.60
NanoChem 300 ml (10 oz.) ________________________ 16.20
Motor block _____________________________________ 54.98
2 Screw M 3x30 V2A _______________________________ 1.27
Clamping ring _____________________________________ 5.19
Impeller bearing ___________________________________ 5.19
Cable clamp ______________________________________ 2.03
Repair kit ________________________________________ 9.40
Air venturi ________________________________________ 8.39
Overflow tube ___________________________________ 24.90
Glueing nipple
D=7/11 ___________________________ 1.29
Pipe for Turbelle® _________________________________ 5.92
Flow deflector ____________________________________ 3.57
Bushing, diam. 21/25 mm (.82/.98 in.) _________________ 2.35
Strainer, 12 cm (4.7 in.) ___________________________ 10.28
T-piece __________________________________________ 6.31
Impeller __________________________________________ 6.65
Reducer _________________________________________ 2.42
Air draw nozzle ___________________________________ 8.39
Turbelle® e-jet 1005 _____________________________ 87.65
Motor block _____________________________________ 110.76
Rotor,shaft+bearing _______________________________ 11.35
Drive unit ______________________________________ 30.34
Inlet hose and fittings ____________________________ 73.69
Recirculation Pump Silence. _______________________ 37.59
Recirculation Pump Silence. _______________________ 90.83
Cover with O ring seal ______________________________ 8.33
Suction housing _________________________________ 10.60
Housing locking bar ________________________________ 9.16
4 suction cups + 2 hose supports _____________________ 7.04
Drive unit with bearing ____________________________ 23.31
Recirculation Pump Silence. ______________________ 153.12
Screw cap 3/4 in., 10 bar (145 psi) ____________________ 4.63
Drive unit for 1073.03/.04 old ______________________ 30.34
Impeller housing for 1073.03/.04 old _________________ 33.97
Screwed socket with O ring seal _____________________ 6.18
Cover with O ring seal ______________________________ 9.45
Suction housing _________________________________ 10.60
Housing locking bar ________________________________ 9.16
4 suction cups + 2 hose supports _____________________ 7.04
Drive unit with shaft _______________________________ 9.45
Master electronic 1073.090 _______________________ 399.59
3 O-rings seal Master 1073.09 _______________________ 7.72
Drive unit, impeller f. 1073.09 ______________________ 56.77
Impeller housing 1073.09 __________________________ 54.04
Ceramic shaft with holder _________________________ 35.24
Hose adapter DN38, 1"1/2G _________________________ 6.95
Strainer ________________________________________ 13.23
Drive unit with impeller for 1073.14 _________________ 49.41
Drive unit with impeller for 1073.16 _________________ 49.41
Hose,diam.25 x200mm _____________________________ 4.63
Clamp ___________________________________________ 4.01
Housing from 1074 _______________________________ 87.42
Cover _________________________________________ 16.65
Overflow Box __________________________________ 138.63
Outlet hose a. clamp 1m/D.40mm __________________ 22.22
Art. No.
Designation
Net sales price $
1075.500
1075/2
1076.150
1076/2
1077.000
1077.100
1200.010
1200.015
1200.150
1201.130
1205.000
1205.015
1205.700
1278.460
1281.313
1282.150
1500.120
1500.130
1560.060
1572.200
1590.300.S
1600.000
1600.010
1600.015
1600.030
1600.060
1605.000
1605.015
1605.700
1651.020.S
1651.761.S
1652.790
1670.000
1674.291
1678.020
1678.370
1678.380
1678.390
1678.400.S
1678.710.S
1691.100
1891.100
2002.000
2002.020
2002.100
2002.110
2002.220
2002.710
3000.010
3000.015
3000.020
3000.030
3000.040
3000.050
3000.070
3000.080
3000.090
3000.092
3000.100
3000.110
3000.120
3000.130
3000.220
3000.225
3000.230
3000.240
3000.243
3000.244
3000.245
3000.250
3000.260
3000.261
3000.264
3000.270
3000.280
Outlet filter _____________________________________ 75.08
Outlet hose _____________________________________ 44.44
Protective grid __________________________________ 10.69
Wall Overflow __________________________________ 125.63
Central Overflow _______________________________ 125.63
Screw connection, pipe and hose ___________________ 67.18
Motor block for 1200 ____________________________ 121.80
Motor block _____________________________________ 110.76
Bushing, outside diam. 25 mm (.98 in.) ________________ 3.06
Turbelle® e-jet 1205 ____________________________ 173.78
Motor block _____________________________________ 110.76
Drive unit ______________________________________ 30.34
Union for hose, diam. 9x12 mm (.35 x .47 in.) __________ 8.60
2 screw+2 nuts M6x16mm __________________________ 2.47
Bushing - outside diam. 25 mm (.98 in.) _______________ 4.18
Impeller __________________________________________ 6.65
Strainer ________________________________________ 21.01
Bubble counter __________________________________ 16.76
Insulation mat ____________________________________ 6.28
Cartridge filter 1600 ______________________________ 32.32
Spare filter cartridge, 225 mm (8.8 in.), 5 pcs. ________ 17.50
Motor block _____________________________________ 66.85
Carbon floss cartridge, 225 mm (8.8 in.), 1 pc. __________ 9.45
Strainer ________________________________________ 18.44
Turbelle® e-jet 1605 ____________________________ 107.78
Motor block _____________________________________ 110.76
Drive unit ______________________________________ 30.34
TS-Cover double black ___________________________ 27.63
TS-Box (empty) _________________________________ 63.61
Strainer, 17 cm (6.6 in.) ___________________________ 13.97
Refillable cartridge 1670 __________________________ 40.46
Grid with cap _____________________________________ 2.94
Bio filter ring 10p. __________________________________ 3.48
PVC hose 6 x 9 mm x 2 m (diam. .23 x .34 x 78.7 in.) ___ 4.07
PVC hose 6 x 9 mm x 10 m (diam. .23 x .34 x 393.6 in.) 19.03
PVC hose 6 x 9 mm x 1 m (diam. 23 x .34 x 39.1 in.) ___ 2.79
Hose clip ________________________________________ 1.33
Connection for bio _________________________________ 6.10
Glass housing
Kit 16/21 _____________________ 263.80
Glass housing
Kit 16/21 _____________________ 263.80
Turbelle® classic 2002 __________________________ 280.40
Cover _________________________________________ 22.39
Motor housing __________________________________ 62.81
Motor with cable _________________________________ 114.82
Rotor __________________________________________ 36.44
Bio connection for 2002, 4002 ______________________ 14.17
Motor block for 3000 ____________________________ 121.80
Motor block _____________________________________ 110.76
O-ring seal, 78x2.5mm _____________________________ 2.10
Cooling duct ______________________________________ 4.95
Upper bearing _____________________________________ 1.71
Magnetic rotor __________________________________ 17.86
Drive shaft _____________________________________ 10.01
Brake shoes 2 pcs. ________________________________ 3.41
Brake shell + ring ________________________________ 10.07
Brake ring ________________________________________ 1.74
Bearing bush ______________________________________ 4.87
Clampring ________________________________________ 3.33
Impeller __________________________________________ 6.65
Mounting bar ______________________________________ 4.34
Elastic ground, 1 pair _______________________________ 0.76
Sliding unit _______________________________________ 3.25
Clamp holder _____________________________________ 7.07
Screw set ________________________________________ 2.53
Holding device extension ____________________________ 4.57
Cable fastener __________________________________ 16.41
Turbelle® holder _________________________________ 10.48
Holding device extension __________________________ 13.00
Plate without thread ________________________________ 1.67
2 screws M5x10mm _______________________________ 2.32
Adhesive attachment for holder ______________________ 3.33
Holding bracket ___________________________________ 3.09
Art. No.
Designation
Net sales price $
3000.300
3000.400
3000.500
3000.600
3000.610
3000.612
3000.620
3000.630
3000.640
3000.650
3000.660
3000.780
3001.400
3005.000
3005.015
3005.130
3005.700
3005.740
3060.400
3060.410
3060.420
3060.440
3060.450
3060.460
3060.500
3110.030
3110.141
3110.150
3110.310
3110.480
3110.490
3115.010
3115.015
3115.040
3115.480
3130.020
3130.130
3130.160
3130.250
3130.340
3130.360
3130.482
3150.110
3150.250
3150.300
3150.310
3155.000
3155.100
3155.200
3155.250
3155.500
3155.600
3165.000
3165.080
3165.100
3165.400
3166.000
3166.020
3166.050
3166.060
3166.070
3166.100
3166.200
3166.231
3166.232
3166.250
3166.280
3166.500
3166.760
3167.000
3167.200
3167.500
3170.000
3170.100
3170.134
Set 3000.07+3000.08 ______________________________ 11.69
Set 3000.09+3000.10 _____________________________ 12.16
Internal parts Turbelle® ___________________________ 36.03
Drive unit ______________________________________ 30.34
Upper bearing _____________________________________ 1.71
O-ring seal, 13x2.5mm _____________________________ 1.67
Bearing bush ______________________________________ 4.87
Magnetic rotor __________________________________ 17.86
Drive shaft _______________________________________ 7.07
Bearing shell ______________________________________ 4.87
2 Brake shoes ____________________________________ 2.16
Bushing, diam. 25/28 mm (.98 / 1.1 in.) ________________ 2.77
Air draw nozzle __________________________________ 11.13
Turbelle® e-jet 3005 ____________________________ 151.38
Motor block _____________________________________ 110.76
Motor block cover _______________________________ 110.76
Drive unit ______________________________________ 30.34
Bearing and attenuation disk _______________________ 110.76
Bracket __________________________________________ 3.75
Suction cup holder _________________________________ 6.92
Suction bell 3 pcs. _________________________________ 2.03
Suction bell 4 pcs. _________________________________ 2.68
Silencer holder for old Turbelle® ____________________ 16.70
Silencer holding device ___________________________ 16.70
Set 3060.40+3060.41 _______________________________ 9.01
Cover for 3110(/2) _______________________________ 10.05
Skimmer cup 300 ml (10.1 f oz.) ___________________ 14.77
Skimmer cup lid ___________________________________ 8.16
Cover with slots ___________________________________ 8.39
Hose with nipple ___________________________________ 2.27
Hose with nipple ___________________________________ 2.27
Motor block _____________________________________ 69.74
Motor block for 3115.04 ___________________________ 68.91
Turbelle® Powerhead ____________________________ 170.01
Silencer with hose ________________________________ 11.90
Cover with four slots _______________________________ 5.90
Impeller housing w. nozzel f. Comline _______________ 46.94
Nozzle __________________________________________ 9.40
Comline skimmer support _________________________ 23.96
Pressure pipe _____________________________________ 3.09
M6 air regulating screw _____________________________ 2.13
Set: 2 hoses+ cap ________________________________ 11.90
Switched Socket Outlet 3150.11 ____________________ 69.92
Support for sensor _______________________________ 13.03
Sensor w.cinch plug ______________________________ 34.82
Holder board ______________________________________ 2.51
Osmolator Universal ____________________________ 213.82
Sliding unit for sensor ______________________________ 3.77
Sliding unit for level sensor __________________________ 3.24
Support f. Osmolator _____________________________ 29.31
Magnet holder for operating sensor __________________ 29.52
Magnet holder for two sensors _____________________ 32.55
Nano Cleaner ___________________________________ 84.04
Bottom lid for 3165, 9002 ___________________________ 4.18
Nano Cleaner housing ____________________________ 44.96
Outlet pipe with flow deflector ________________________ 5.46
Comline filter. __________________________________ 105.89
Sliding cover ______________________________________ 5.03
Cup H7A, ø 19mm _________________________________ 1.67
Cup black ø 9,5mm ________________________________ 1.67
Retaining plate ____________________________________ 5.03
Filter housing ___________________________________ 65.33
Comline bell compl. ______________________________ 32.77
Sliding unit Comline holder right ______________________ 3.25
Sliding unit Comline holder left _______________________ 3.25
Comline support _________________________________ 16.80
Pot with handle _________________________________ 23.45
Comline filter __________________________________ 164.24
Tube 19x300 ______________________________________ 5.92
Comline double filter. ____________________________ 202.30
Comline bell complete for 3167 _____________________ 32.77
Comline double filter _____________________________ 248.11
Comline automatic calcium dispenser ______________ 326.79
Housing of Calcium Automat _______________________ 54.04
Connecting unit to 800.040 ________________________ 19.38
29
30
Art. No.
Designation
Net sales price $
3170.135
3170.200
3170.300
3170.460
3170.500
3174.112
3178.710
3179.000
3179.020
3179.050
3179.100
3200.000
3200.520
4002.000
4002.020
4002.060
4002.070
4002.080
4002.090
4002.100
4002.110
4002.120
4002.130
4002.131
4002.200
4002.202
4002.203
4002.220
4002.250
4002.260
4002.770
5000.020
5000.150.S
5000.240
5000.300
5000.380
5000.390
5000.430.S
5000.440
5000.500
5000.780.S
5001.015
5001.390.S
5002.100
5002.250
5005.000
5005.015
5012.010
5016.000
5016.100
5017.000
5020.250
5020.300
5024.010
5024.020
5024.040
5024.042
5074.000
5074.010
5074.500
6025.000
6025.100
6025.130
6025.200
6025.250
6025.500
6025.510
6025.700
6025.740
6045.000
6045.100
6045.130
6055.000
6055.100
6055.240
Connecting unit to 1073.008 _______________________ 19.38
Reactor of Calcium Automat ______________________ 155.33
Reducing adapter and T piece _______________________ 3.33
Y branch _________________________________________ 6.37
Automatic calcium dispenser extension. _____________ 94.02
Screw cap and seal ________________________________ 8.39
Bio connection for 3005 ___________________________ 12.96
Bio-hydro-reactor ________________________________ 94.02
Sliding cover with cutout ____________________________ 5.03
Filter mat ________________________________________ 6.28
Housing _______________________________________ 54.04
Cartridge filter 3200 ______________________________ 58.34
Connector ______________________________________ 19.10
Turbelle® classic 4002 __________________________ 329.70
Cover _________________________________________ 25.72
Screw M 4x20 V2A ________________________________ 1.21
Motor bearer 2 pcs. ________________________________ 6.43
Retainer 10 pcs. ___________________________________ 7.58
Fan _____________________________________________ 8.07
Motor housing __________________________________ 62.75
Motor with cable ________________________________ 141.78
Rubber mount 4 pcs. _______________________________ 6.28
Shaft set _______________________________________ 12.78
Pinion with spring __________________________________ 6.28
Shaft housing ___________________________________ 19.33
Clamping ring _____________________________________ 5.25
Felt strip _________________________________________ 1.59
Rotor __________________________________________ 34.95
Repair kit ______________________________________ 19.24
Motor bearings 2pcs. _____________________________ 25.72
Flow deflector ____________________________________ 5.81
Metering pump __________________________________ 23.89
Protective grid ____________________________________ 9.85
Hose clamp ______________________________________ 1.89
Sensor w.cinch plug ______________________________ 34.82
PVC hose 4 x 7 mm x 10 m (diam. .15 x .27 x 393.6 in.) 14.91
PVC hose 4 x 7 mm x 3 m (diam. .15 x .27 x 118.1 in.) ___ 5.22
Cap _____________________________________________ 1.82
Cap _____________________________________________ 1.62
Holder for 3 sensors _____________________________ 25.42
Plug in connector __________________________________ 2.50
Motor block ____________________________________ 155.95
Silocon hose (12,5cm) ______________________________ 6.62
Storage container 13 l (3.4 USgal.) ___________________ 11.31
Storage container 27 l (7.1 USgal.) __________________ 21.53
Turbelle® e-jet 5005 ____________________________ 213.02
Motor block _____________________________________ 110.76
Power supply unit 11V ____________________________ 20.10
Controller no more available see 5017 _______________ 159.11
Velcro® strips 2x5,5cm (2.1 in.) ______________________ 1.30
Controller ______________________________________ 159.11
Air adjust (chock) __________________________________ 2.03
Sensor w. jack plug ______________________________ 34.82
Filter sponge for 5024 ______________________________ 3.33
Top cover for 5024,3165 ____________________________ 4.18
Universal pump Mini 5024.04 ______________________ 15.68
Drive unit for 5024.04 ______________________________ 5.31
Calcium dispenser _______________________________ 116.70
Non-return valve water _____________________________ 3.94
Calcium hydroxide - 250 g (.55 lbs.) _________________ 12.10
Turbelle® nanostream® 6025 ______________________ 66.05
Motor block _____________________________________ 33.27
Propeller housing ________________________________ 12.35
Protective grating ________________________________ 10.04
Nanostream® Rock ______________________________ 49.80
Magnet holder __________________________________ 23.80
Clamp ___________________________________________ 8.49
Drive unit ______________________________________ 12.35
Disc for drive _____________________________________ 1.54
Turbelle® nanostream® 6045 ______________________ 95.78
Motor block _____________________________________ 45.94
Turbelle® nanostream® 6055 _____________________ 243.19
Motor block ____________________________________ 131.24
Power supply unit 12-24V DC ______________________ 44.78
Art. No.
Designation
Net sales price $
6055.700
6060.015
6060.120
6060.250
6065.000
6065.100
6065.130
6065.500
6065.510
6065.600
6065.700
6065.792
6080.015
6080.120
6080.130
6080.200
6080.230
6080.250
6080.400
6080.500
6080.520
6080.600
6080.640
6080.641
6085.000
6085.100
6085.700
6091.000
6100.015
6100.100
6100.120
6100.600
6100.700
6101.015
6101.240
6101.241
6101.242
6101.243
6101.244
6105.000
6105.100
6105.500
6105.700
6125.000
6125.100
6125.700
6130.015
6200.015
6200.100
6200.120
6200.130
6200.230
6200.250
6200.255
6200.500
6200.509
6200.700
6200.800
6201.015
6205.000
6205.100
6205.130
6205.200
6205.500
6205.600
6205.700
6206.000
6206.100
6206.200
6212.020
6212.070
6212.200
6212.300
6215.000
6215.015
Drive unit for 6055 _______________________________ 12.35
Motor block _____________________________________ 68.91
Hydro propeller __________________________________ 12.49
Turbelle® holder _________________________________ 15.82
Turbelle® stream 6065 __________________________ 143.75
Motor block _____________________________________ 57.48
Magnet holder __________________________________ 43.14
Clamp __________________________________________ 11.52
Magnet Holder Silence ____________________________ 49.20
Drive unit ______________________________________ 23.68
Disc for drive _____________________________________ 1.54
Motor block ____________________________________ 121.80
Hydro propeller __________________________________ 12.49
Suction housing _________________________________ 47.12
Protective grating _________________________________ 11.81
Sliding piece with hinge _____________________________ 6.12
Holder stabilizer ___________________________________ 4.72
Swivel arm _______________________________________ 4.72
Magnet holder __________________________________ 43.14
Clamp holder ___________________________________ 15.14
Drive unit ______________________________________ 35.06
Drive shaft _______________________________________ 8.64
Screw M4x16 _____________________________________ 1.36
Turbelle® stream 6085 __________________________ 189.54
Motor block _____________________________________ 97.58
Drive unit ______________________________________ 27.49
Wavecontroller _________________________________ 104.53
Motor block for 6100/6100A _______________________ 98.44
Turbelle® stream rep. ___________________________ 243.55
Hydro propeller __________________________________ 18.89
Drive unit for 6000/6100/6200 ______________________ 35.54
Drive unit+ propeller ______________________________ 34.42
Motor block ____________________________________ 257.86
Power supply unit 12-24V DC ______________________ 60.22
15 V jumper for 6101.240 ___________________________ 2.27
24 V jumper for 6101.240 ___________________________ 2.27
18 V jumper for 6101.240 ___________________________ 2.27
12 V jumper for 6101.240 ___________________________ 2.27
Turbelle® stream 6105 __________________________ 346.00
Motor block ____________________________________ 186.65
Safety Connector ________________________________ 54.04
Drive unit ______________________________________ 31.00
Turbelle® stream 6125 __________________________ 251.88
Motor block ____________________________________ 127.38
Drive unit ______________________________________ 31.00
Motor block ____________________________________ 142.88
Motor block for 6200/6200A ______________________ 187.42
Turbelle® stream rep. ___________________________ 331.27
Hydro propeller __________________________________ 22.84
Suction housing _________________________________ 55.22
Sliding piece + screw _______________________________ 6.12
Stream Rock ___________________________________ 91.34
Turbelle® holder _________________________________ 19.30
Magnet holder. __________________________________ 61.90
9 elastic pads f. Magnet Holder ______________________ 3.33
Drive unit + propeller _____________________________ 46.03
Transformer 20V/80VA ___________________________ 128.99
Motor block ____________________________________ 342.78
Turbelle® stream 6205 __________________________ 550.81
Motor block ____________________________________ 272.93
Protective grating ________________________________ 13.32
Magnet holder __________________________________ 61.90
Magnet Holder Silence ____________________________ 67.95
Drive unit ______________________________________ 43.07
Nano Wavebox _________________________________ 358.72
Nano Wavebox housing ___________________________ 57.67
Nano Wavebox pump ___________________________ 161.52
Cover with twelve slots _____________________________ 5.90
Retaining plate __________________________________ 23.34
Protective grating _________________________________ 11.81
Sponge-ring ______________________________________ 11.53
Wavebox _____________________________________ 604.42
Motor block ____________________________________ 339.08
Art. No.
Designation
Net sales price $
6215.100
6215.200
6215.300
6215.500
6250.510
6260.015
6260.100
6261.000
6261.015
6300.130
6300.240
6300.700
6301.015
6305.000
6305.100
6305.130
6305.700
7005.140
7008.000
7008.200
7008.400
7008.500
7010.000
7011/2
7012/2
7013.000
7014/2
7015/2
7016.000
7016.500
7017/2
7019/2
7020/2
7028.900
7028.902
7028/3
7028/3_A
7030.140
7032/2
7040.110
7040.115
7040.117
7040.120
7040.130
7040.140
7040.200
7040.400
7055.100
7070.010
7070.012
7070.015
7070.100
7070.110
7070.250
7070/2
7071/2
7072.100
7072.200
7072.300
7073.100
7074.110
7074.400
7074.500
7074/2
7075.120
7075/2
7077.100
7077.110
7077.150
7077.200
7077.210
7077.300
7077.310
7077/3
7079.150
Wavebox housing ________________________________ 83.26
Wavebox pump ________________________________ 363.30
Foam ring ________________________________________ 9.26
Wavebox extension _____________________________ 538.58
O-ring seal 50x6 mm _______________________________ 6.78
Motor block ____________________________________ 175.95
Wavebox pump _________________________________ 307.11
Wavebox pump ________________________________ 366.66
Motor block ____________________________________ 278.88
Suction housing ø63mm __________________________ 76.31
Power supply unit 24 VDC _______________________ 193.01
Drive unit + propeller _____________________________ 58.20
Motor block ____________________________________ 525.52
Turbelle® stream 6305 __________________________ 789.96
Motor block ____________________________________ 427.55
Drive unit ______________________________________ 43.07
Calibration solution 600 µS/cm _______________________ 8.07
Reef Excel® Lab Marine Salt, 8kg __________________ 28.36
Reef Excel® Lab Marine Salt, 16 kg _________________ 58.87
Reef Excel® lab marine salt, 4 x 8kg ________________ 115.31
Reef Excel® lab marine salt, 20kg __________________ 68.20
Quick test for nitrate, 100 strips ____________________ 35.18
Nitrate measuring box ____________________________ 66.64
Nitrite measuring box ____________________________ 110.02
Multistick ______________________________________ 55.36
Carbonate hardness measuring box _________________ 69.29
Calcium measuring box ___________________________ 110.02
Quick test for phosphate __________________________ 59.88
High sensitivity test for phosphate _________________ 138.49
Ammonia measuring box __________________________ 68.09
Iron measuring box ______________________________ 66.00
Total hardness measuring box _____________________ 42.40
TUNZE® Aquawind ______________________________ 80.29
Power supply unit ________________________________ 39.66
Temperature controller set °C _____________________ 246.59
Temperature controller set °F _____________________ 246.59
Calibration solution 50 mS/cm _______________________ 8.07
Conductivity meter ______________________________ 333.54
pH-buffer, pH 9 ___________________________________ 8.22
ph-buffer, pH 5 ____________________________________ 9.04
pH-buffer, ph 7 ____________________________________ 6.96
Buffer solution for pH 7 and 9 ______________________ 13.18
Buffer solution for pH 5 and 7 ______________________ 13.46
Buffer set pH 5/7/9 ______________________________ 22.25
Cleaning solution __________________________________ 8.07
3 m KCl solution 50ml ______________________________ 6.96
mV Electrode __________________________________ 188.42
CO2 non-return valve. ____________________________ 14.29
Glue-in nipple for hose, diam. 4x6 mm (.15x.23 in.) ______ 1.32
Glue-in nipple 30° for hose, diam. 4x6 mm (.15 x .23 in.) __ 1.32
pH Electrode 7070.10 ___________________________ 100.29
pH Electrode 7070.11 ____________________________ 112.32
Wall holder _______________________________________ 6.52
pH controller ___________________________________ 338.84
mV controller __________________________________ 385.39
pH-Electrode f.7072 _____________________________ 143.66
Silicon hose 4 x 7 mm x 5 m (diam. 15 x.27 x196.8 in.) _ 19.04
PVC hose 4 x 6 mm x 5 m (diam. .15 x .23 x 196.8 in.) __ 5.87
Platinum electrode ______________________________ 199.82
Valve Set 7074.11 _______________________________ 142.37
12V solenoid valve ______________________________ 103.69
CO2 diffuser ____________________________________ 32.76
pH/CO2 controller set ___________________________ 469.83
Switched socket outlet ___________________________ 115.06
mV controller set _______________________________ 483.32
Press. gauche 7077/2 0-250 bar ____________________ 17.05
Press. gauche 7077/3 0-250 bar ____________________ 20.47
Seal ring for 7077.100 ______________________________ 1.67
Fine adjustment val. 7077/2 _______________________ 17.05
Fine adjustment val. 7077/3 _______________________ 19.39
Seal ring for 7077/2 ________________________________ 4.18
Seal ring for 7077/3 ________________________________ 4.18
Pressure reducer ________________________________ 99.64
CO2 cylinder - 1.5 kg (3.3 lbs.) ____________________ 177.07
Art. No.
Designation
Net sales price $
7079.200
7080.000
7091.000
7092.300
7092.340
7094.050
7094.400
7095.000
7095.051
7096.000
7180.010
7180.015
7200.200
7200.600
7210.202
7240.000
7240.015
7240.245
7240.256
7240.270
7240/2
7400.610
7410.120
7410.602
7607/2
8001.000
8002.000
8003.000
8004.000
8005.000
8006.000
8007.000
8008.000
8009.000
8016.000
8018.000
8020.000
8040.000
8041.000
8041.100
8042.000
8043.000
8043.070
8043.100
8044.000
8045.000
8045.070
8048.000
8049.000
8051.000
8062.000
8063.000
8065.000
8068.000
8072.000
8073.000
8075.000
8078.000
8101.000
8102.000
8103.000
8104.000
8105.000
8106.000
8107.000
8107.010
8108.000
8108.010
8110.000
8110.010
8111.000
8112.000
8114.000
8159.011
8159.012
CO2 cylinder - 2.0 kg (4.4 lbs.) ____________________ 203.51
Theben-Timer 7080 ______________________________ 33.50
Singlecontroller __________________________________ 70.75
Cable 1,2m Multicontroller _________________________ 19.06
Y adapter ______________________________________ 57.30
Photo-electric cell ________________________________ 18.04
Pump adapter ___________________________________ 114.44
Multicontroller __________________________________ 289.19
Cable clamp 3mm _________________________________ 1.89
Multicontroller __________________________________ 175.55
Motor block for 7180 _____________________________ 95.93
Motor block for 7180/2 ____________________________ 95.93
Transformer 12V/20VA ____________________________ 45.22
Drive unit ______________________________________ 30.93
Transformer 12V/20VA ____________________________ 49.95
Turbelle® electronic _____________________________ 229.94
Motor block _____________________________________ 98.44
Button for driver ___________________________________ 0.65
angle AL 80x40x15x2 _______________________________ 2.89
Driver _________________________________________ 118.12
Turbelle® electronic _____________________________ 229.94
O-ring seal red ____________________________________ 1.67
Impeller __________________________________________ 6.65
Transformer (19)20V/65VA ________________________ 86.66
Water level alarm _______________________________ 207.36
T8 Osram Lumilux 11 - L 44 cm (17.3 in.), 15 W ______ 13.79
T8 Osram Lumilux 11 - L 59 cm (23.3 in.), 18 W _______ 10.05
T8 Osram Lumilux 11 - L 90 cm (35.4 in.), 30 W _______ 15.24
T8 Osram Lumilux11 - L 120 cm (47.2 in.), 36 W ________ 9.22
T8 Osram Lumilux11 - L 150 cm (59 in.), 58 W ________ 15.43
T8 Osram blue 67 - L 59 cm (23.3 in.), 18 W _________ 19.60
T8 Osram blue 67 - L 90 cm (35.4 in.), 30 W _________ 19.60
T8 Osram blue 67 - L 120 cm (47.2 in.), 36 W ________ 19.60
T8 Osram blue 67 - L 150 cm (59 in.), 58 W __________ 19.60
T12 Philips Aqua Coral - L 120 cm (47.2 in.), 40 W ____ 40.08
T12 Philips Aqua Coral - L 59 cm (23.3 in.), 40 W _____ 46.03
T12 Philips Aqua Coral - L 150 cm (59 in.), 140 W _____ 57.95
HQI bulb 70W/D, 5,200 K, RX7s ___________________ 62.40
HIT bulb 70W, 10,000 K, RX7s ___________________ 125.34
HIT bulb 70W, blue, >15 K, RX7s __________________ 117.04
HQI bulb 150W/D, 5,200 K, RX7s __________________ 68.03
HIT bulb 150W, 10,000 K, RX7s ___________________ 75.55
HIT bulb 150W, 14,000 K, RX7s __________________ 137.07
HIT bulb 150W, blue, >15K, RX7s __________________ 117.04
HQI bulb 250W/D, 5,200 K, Fc2/18 ________________ 133.56
HIT bulb 250W, 10,000 K, Fc2/18 __________________ 86.69
HIT bulb 250W, 14,000 K, Fc2/18 _________________ 159.29
HQI bulb 250W, 10,000 K, E40 ____________________ 167.12
HQI bulb 400W, blue, E40 ________________________ 198.91
HIT bulb 400W, 10,000 K, E40 ____________________ 232.41
T5 Osram Daylight - L 54.9 cm (21.6 in.), 24 W _______ 11.85
T5 Osram Daylight - L 84.9 cm (33.4 in.), 39 W ________ 11.85
T5 Osram Daylight - L 114.9 cm (45.2 in.), 54 W ______ 12.44
T5 Osram Daylight - L 144.9 cm (57 in.), 80 W ________ 14.12
T5 Narva blue 2 - L 54.9 cm (21.6 in.), 24 W _________ 37.84
T5 Narva blue 2 - L 84.9 cm (33.4 in.), 39 W _________ 42.10
T5 Narva blue 2 - L 114.9 cm (45.2 in.), 54 W ________ 44.61
T5 Narva blue 2 - L 144.9 cm (57 in.), 80 W __________ 48.85
T8 reflector, tube L 44 cm (17.3 in.), 15 W ___________ 12.69
T8 reflector, tube L 59 cm (23.2 in.),18 W ____________ 14.56
T12 reflector, tube L 59 cm (23.2 in.), 40 W __________ 16.26
T8 reflector, tube L 90 cm (35.4 in.), 30 W ___________ 18.35
T8 reflector, tube L 120 cm (47.2 in.), 36 W __________ 20.53
T12 reflector, tube L 120 cm (47.2 in.), 40 W _________ 24.30
T8 reflector, tube L 150 cm (59.06 in.), 58 W _________ 24.52
2 tube brackets, diam. 26 mm (1.02 in.) _______________ 5.28
T12 reflector, tube L 150 cm (59 in.), 140 W __________ 29.14
2 tube brackets, diam. 38 mm (1.49 in.) _______________ 7.28
T5 reflector, tube L 54.9 cm (21.6 in.), 24 W _________ 18.07
2 tube brackets, diam. 16 mm (.62 in.) ________________ 4.72
T5 reflector, tube L 144.9 cm (57.05 in.), 80 W ________ 26.98
Ballast 70W for 140W ____________________________ 36.63
Starter for 140 W tubes ___________________________ 10.25
31
32
Art. No.
Designation
Net sales price $
8200.000
8201.000
8202.000
8203.000
8204.000
8205.000
8215.000
8218.000
8230.000
8236.000
8258.000
8322.000
8323.000
8325.000
8328.000
8441.100
8441.350
8441.400
8460.000
8465.000
8470.000
8480.000
8480.002
8480.004
8490.000
8512.100
8515.000
8515.070
8515.080
8515.120
8515.500
8515.520
8515.701
8515.702
8522.100
8522.120
8532.010
8532.020
8532.021
8532.030
8532.040
8532.050
8532.060
8532.070
8532.080
8532.090
8533.000
8533.100
8550.000
8550.010
8550.020
8550.090
8550.100
8550.120
8550.501
8550.510
8550.520
8550.530
8550.600
8550.602
8552.500
8552.520
8554.520
8555.000
8555.100
8555.200
8556.000
8557.000
9002.000
9002.030
9002.100
9002.250
9002.400
9005.015
9005.040
Electronic starter 8 - 65 W ________________________ 21.59
Screw connection - diam. 26 mm (1.02 in.) _____________ 6.62
Screw connection - diam. 38 mm (1.49 in.) _____________ 5.40
Screw connection - diam. 16 mm (.62 in.) ______________ 5.40
Starter Sti 20W ___________________________________ 4.74
Socket f.tube ø26mm ____________________________ 10.90
T8 built-in illuminator - ~ 54 cm (21.2 in.), 2x15 W ____ 109.66
T8 built-in illuminator - ~ 67.5 cm (26.5 in.), 2x18 W ___ 110.37
T8 built-in illuminator - ~ 97.5 cm (38.3 in.), 2x30 W __ 140.01
T8 built-in illuminator -~ 128 cm (50.3 in.), 2x36 W ___ 166.38
T8-Built-in illuminator - ~ 158 cm (62.2 in.), 2x58 W ___ 163.31
T5 built-in illuminator - ~ 100 cm (39.3 in.), 2x39 W ___ 203.47
T5 built-in illuminator - ~ 126 cm (49.6 in.), 2x54 W ___ 216.42
Canopy black _____________________________________ 4.18
Holding dev.f. 8460/-65/-70/-80/-90 __________________ 55.51
Rope for lamp,2m _________________________________ 4.18
Lamp - Design 8460 _____________________________ 558.90
Lamp - Design 8465 _____________________________ 694.82
Lamp - Design 8470 ____________________________ 1303.20
Lamp - Extension 8480 _________________________ 1282.65
External Controller 250W,230V/50Hz _______________ 381.42
External Controller 400W,230V/50Hz _______________ 418.00
Lamp - Extension 8490 _________________________ 1329.91
Carbon / sediment filter S _________________________ 32.61
Nano RO station ________________________________ 99.70
Preliminary filter with O-ring seal ___________________ 15.14
Carbon Block O-ring seal ____________________________ 3.78
Carbon Block Filter _______________________________ 11.01
Thin-film composite membrane _____________________ 71.22
Capillary for 8515 ________________________________ 19.78
Metric adapter __________________________________ 10.84
Angle for RO tube _________________________________ 7.42
Sediment fine filter L _____________________________ 17.15
Carbon sediment filter 5µm ________________________ 12.81
1/4" nylon nipple ___________________________________ 5.90
1/4 in. elbow for reverse osmosis hose ________________ 5.96
Clamp for RO connection ___________________________ 1.67
1/8 in. elbow for reverse osmosis hose ________________ 6.68
1/8 in. junction for hose 6.3 mm (.24 in.). ______________ 7.42
Pressure gauge 1/8" ______________________________ 18.47
Screw 3,2x17mm Kogapur __________________________ 0.33
O-ring seal for membrane housing ____________________ 3.41
O-ring seal for filter housing _________________________ 5.84
1/4" - 1/8" nylon nipple ______________________________ 5.24
RO TDS Monitor ________________________________ 69.90
T-piece __________________________________________ 9.54
RO station. ____________________________________ 169.90
Wrench for 8550 ___________________________________ 7.42
1/4 in. junction for reverse osmosis hose _______________ 5.48
1/4" connector with RO pipe _________________________ 7.81
Carbon sediment filter .5 µm _______________________ 15.49
Sediment filter 20 µm ____________________________ 10.97
Mixed Bed Ion Exchanger _________________________ 23.16
Spare membrane for 8550 ________________________ 101.60
Capillary 25% rate 60S/M/L ______________________ 13.06
Capillary for 8550 __________________________________ 6.90
RO Ion Exchanger _______________________________ 39.90
Clip for 8550.600 __________________________________ 8.66
Membrane Kogapur 90S/M/L ___________________ 122.49
Capillary 25% rate 90S/M/L _______________________ 13.06
Capillary 25% rate 150/M/L _______________________ 13.06
RO water controller ______________________________ 211.85
Controller 8555 __________________________________ 97.52
Water valve ____________________________________ 89.31
Reverse osmosis pressure hose /1m __________________ 4.22
3/4 in. screw connection __________________________ 18.98
DOC Skimmer 9002 _____________________________ 162.65
Upper lid _______________________________________ 10.05
Housing for 9002 ________________________________ 56.46
Nano holder ____________________________________ 12.82
Outlet pipe with nozzle ___________________________ 16.64
Motor block _____________________________________ 61.04
Hydrofoamer ___________________________________ 170.01
Art. No.
Designation
Net sales price $
9005.140
9005.400
9006.000
9006.015
9006.040
9010.015
9010.040
9010.100
9010.200
9010.300
9010.350
9010.360
9010.400
9010.700
9011.000
9011.015
9011.040
9015.140
9016.000
9020.140
9021.000
9206.000
9211.000
9400.040
9400.041
9400.042
9400.043
9400.046
9400.047
9400.048
9410.000
9410.040
9410.041
9410.047
9410.048
9410.200
9410.241
9410.250
9410.300
9410.400
9410.500
9420.000
9420.040
9420.041
9420.042
9420.043
9420.045
9420.046
9420.047
9420.048
9420.211
9420.231
9420.241
9420.250
9420.260
9420.300
9420.380
9420.400
9440.000
9440.300
9460.000
9460.211
9460.231
9460.241
9460.250
9460.300
9480.000
9480.300
END
Skimmer cup ___________________________________ 59.58
DOC skimmer extension set _______________________ 55.12
DOC Skimmer 9006. ____________________________ 291.31
Motor block _____________________________________ 61.04
Hydrofoamer ___________________________________ 170.01
Motor block _____________________________________ 110.76
Hydrofoamer ____________________________________ 211.94
Housing ______________________________________ 130.64
Cover for aspirator ________________________________ 11.99
Cover with sliding cover __________________________ 12.64
Cap with cover ____________________________________ 5.53
Air regulator screw M8 ______________________________ 2.32
Sleeve below cover _______________________________ 11.99
Tube with bushing _______________________________ 25.16
DOC Skimmer 9011. ____________________________ 371.45
Motor block _____________________________________ 110.76
Hydrofoamer e-jet _______________________________ 211.94
Skimmer cup __________________________________ 126.46
DOC Skimmer 9016. _____________________________ 496.11
Foam extraction unit _____________________________ 114.18
DOC Skimmer 9021. ____________________________ 623.31
DOC Skimmer 9206. ____________________________ 291.31
DOC Skimmer 9211. ____________________________ 368.91
Hydrofoamer ___________________________________ 305.72
Motor block with O ring seal ______________________ 181.65
Cover with O ring seal and nozzle __________________ 18.44
Pump housing ___________________________________ 36.68
Ceramic shaft with holder ___________________________ 6.30
Complete drive unit with shaft _____________________ 43.23
DOC Skimmer 9410 _____________________________ 420.07
Hydrofoamer Silence ____________________________ 162.82
Motor block with screw ___________________________ 99.15
Drive unit with bearing. ___________________________ 23.72
Post-filter bag ___________________________________ 16.09
Housing ______________________________________ 121.48
Disc ___________________________________________ 16.03
Outlet pipe155mm (6.1 in.) __________________________ 5.90
Adapter ring for 9410. ______________________________ 3.47
Post-filter ______________________________________ 35.10
Master DOC Skimmer 9420.000 ___________________ 883.33
Hydrofoamer Silence ____________________________ 200.98
Motor block with screw ___________________________ 113.53
Cover with O ring seal and nozzle __________________ 18.47
Screw for Motor block ______________________________ 0.83
Hose clip ________________________________________ 5.75
Cooling duct ______________________________________ 4.39
Skimmer cup __________________________________ 147.96
Skimmer cup lid _________________________________ 91.60
Housing ______________________________________ 242.73
Disc ___________________________________________ 22.09
Angle 90 deg. ____________________________________ 11.96
Outlet pipe 220 mm (9 in.) ___________________________ 5.90
Outlet fleece, 1 ea. ________________________________ 4.84
Booster-Ring ______________________________________ 3.47
Master DOC Skimmer 9440.000 __________________ 1084.31
Outlet pipe 120 mm (4.7 in.) _________________________ 5.18
Skimmer cup __________________________________ 454.13
Skimmer cup lid ________________________________ 133.01
Housing ______________________________________ 784.99
Disc ___________________________________________ 42.42
Outlet pipe 280 mm (11 in.) __________________________ 8.84
Outlet pipe 240 mm (9.4 in.) _________________________ 6.16

Spare parts catalog with prices

Transcription

Similar documents

Spare parts catalogue with prices

Seekadett - S.M.S. Hansa