Reno Deco guide

Curbs
For Quality
Visit our website
Products from the
Reno•deco guide
Plan your projects!
projects that last
A vast selection of economical,
esthetic projects that are
easy to install
www.bolduc.ca
Add beauty, quality to durability
for any project and enhance
your property!
Medium Curb 6”
HEIGHT X WIDTH X LENGTH
inches
cm
6 x 31/8 x 393/8
15 x 8 x 100
• Gray
Regular Curb 8”
HEIGHT X WIDTH X LENGTH
inches
cm
8 x 31/8 x 393/8
20 x 8 x 100
• Gray
Corner 90o
HEIGHT X WIDTH X LENGTH
inches
cm
8 x 31/8 x 12
20 x 8 x 30
• Gray
Pavers, Wallstones, Slabs and Curbs
Radius 24 ”
1/2
HEIGHT X WIDTH X LENGTH
inches
cm
8 x 31/8 x 393/8
20 x 8 x 100
• Gray
Dek-Block
HEIGHT X WIDTH X LENGTH
inches
cm
73/16 x 11 x 11
18,2 x 28 x 28
• Gray
Radius 24 1/2 in. / 62,5 cm
You can install the design of your dreams
yourself with a product line tailored to your
needs. Walkways, patios, wallstones… It’s
never been easier!
Let your
imagination guide you!
1358–2nd Street,
Industrial Park,
Sainte-Marie, Beauce,
Québec, Canada
G6E 1G8
1 800 463-8966
www.bolduc.ca
[email protected]
Pavers, walls,
slabs and curbs
Reno•deco
Guide
How to choose and
install our products
Slope Block
Slabs and pavers
Regular
Walls
Runner
Regular
HEIGHT X WIDTH X LENGTH
inches
cm
13/4 x 153/4 x 153/4
4,5 x 40 x 40
Patinart
• Gray
HEIGHT X WIDTH X LENGTH
inches
cm
2 x 97/8 x 10
5 x 25 x 25,3
• Sandy Gray
• Ashen Beige
• Sandhill Beige
• Indiana Beige
Iris Slab
• Sandy Gray
• Sandhill Beige
Romance Paver and Slab
Patinart
Modular according to pattern
Lotus Stone
Antique
Runner
HEIGHT X WIDTH X LENGTH
inches
cm
19/16 x 115/8 x 115/8
4 x 29,5 x 29,5
• Gray
• Beige and Charcoal
• Red and Charcoal
• Ashen Beige
• Indiana Beige
2
1
Regular
Basket Weave
2
Runner
HEIGHT X WIDTH X LENGTH
inches
cm
2 x 315/16 x 77/8
5 x 10 x 20
• Gray
Slope Block II Econo Split Face
2
Modular
Regular
Runner
HEIGHT X DEPTH X LENGTH
inches
cm
6 x 87/8 x 77/8
15 x 22,5 x 20
• Pebble Gray
• Sandstone Beige
• Ashen Buff
• Terracotta Brown
• Gray
Slope Block I Econo
Runner
Regular
Champlain Wallstone
1
Herringborne
Runner
New England Econo
3
• Gray
• Soapstone Gray
• Beige and Charcoal
• Red and Charcoal
HEIGHT X DEPTH X LENGTH
inches
cm
1. Bevelled module
1/2
4 x 8 x 12
10,2 x 21,6 x 30,5
2. Straight module
1/2
4 x 8 x 12
10,2 x 21,6 x 30,5
• Gray and Charcoal
• Beige and Charcoal
• Beige and Charcoal
1
HEIGHT X DEPTH X LENGTH
inches
cm
4 x 7 x 6-8
10 x 17,5 x 15-20
• Ashen Beige
• Indiana Beige
1
Runner
HEIGHT X DEPTH X LENGTH
inches
cm
3 1/2 x 7 x 10 1/2
9 x 18 x 27
Antique
Runner
• Gray and Charcoal
• Red and Charcoal
Split
Sutton Wallstone
HEIGHT X WIDTH X LENGTH
inches
cm
1. 2 x 6 x 3
5 x 15 x 7,5
2. 2 x 6 x 4
5 x 15 x 10
3. 2 x 6 x 6
5 x 15 x 15
Champlain Paver
Classic
Antique
Runner
HEIGHT X WIDTH X LENGTH
inches
cm
1. 2 x 57/8 x 57/8
5 x 15 x 15
2. 2 x 1113/16 x 1113/16
5 x 30 x 30
HEIGHT X WIDTH X LENGTH
inches
cm
Medium dimensions
3/4
2 x 13 x 19
5 x 33 x 50
• Sandy Gray
• Ashen Beige
• Sandhill Beige
• Indiana Beige
Six (6) different stone models
Champlain Slab
• Sandy Gray
• Sandhill Beige
Romance
Stair Covering System
Patinart
Random
Runner
HEIGHT X WIDTH X LENGTH
inches
cm
1. 2 x 14 x 16
5 x 35,6 x 40,6
5 x 17,8 x 40,6
2. 2 x 7 x 16
Patio Slab
NEW
Walls
Patinart
Runner
HEIGHT X WIDTH X LENGTH
inches
cm
4,5 x 40 x 40
13/4 x 153/4 x 153/4
• Gray and Chacoal
• Beige and Brown
Classic Slab
Slope Block
Runner
HEIGHT X DEPTH X LENGTH
inches
cm
5 5/16 x 11 x 77/8
13,4 x 28 x 20
• Gray
2
Slope Block I Classic
Regular
Runner
Plan your projects!
HEIGHT X DEPTH X LENGTH
inches
cm
6 x 14 x 77/8
15 x 35 x 20
Visit our website
• Gray
www.bolduc.ca
Slope Block I Regular 8”
Pavers, Slabs, Walls and Curbs installation guide
Pavers
Surface (sq. ft.)
pavers/sq.ft
10
25
75
100
150
200
Number of pavers needed
Romance Paver
4,1
41
103
750
410
615
820
Champlain Paver
5,6
56
140
420
560
840
1120
New England Paver
4,7
47
118
353
470
705
940
Ex.: 410 units of Romance paver are required for a 100 sq. ft. patio.
Walls
stones/sq.ft.
10
15
25
35
Sutton Wall
Maximum height 24 in.
3,8
19
38
57
95
133
Champlain Wall
Maximum height 36 in.
3
15
30
45
75
105
Slope Block II Econo Split Face
Maximum height 24 in.
5,3
27
53
80
133
186
Slope Block I Econo
Maximum height 36 in.
3,1
16
31
47
78
109
Slope Block I Classic
Maximum height 51 in.
3,4
17
34
51
85
119
Slope Block I Regular 8”
Maximum height 43 in.
3,1
16
31
47
78
109
Slabs
slabs/sq.ft.
sq.ft. = height x length of wall (ex: 21 in. height x 20 ft length = 35 sq. ft.)
25
75
100
150
Classic Slab
0,59
6
15
45
59
89
118
Iris Slab
1,4
14
35
105
140
210
280
Lotus Stone
0,87
9
22
65
87
130
174
Romance Slab
1,00
10
25
75
100
150
200
Champlain Slab
1,07
11
27
81
107
161
214
Patio Slab
0,59
6
15
45
59
89
118
Ex.: 75 Romance slabs are required for a 75 sq. ft. patio.
curb/lin. ft.
Length (lin. ft.)
6
12
24
48
96
Number of curbs needed
MATERIAL
REQUIRED FOR
110 sq. ft. (10 M2)
Residential
Driveway
Sidewalk
or Patio
(pavers or slabs)
MINIMUM
BASE
THICKNESS
BEDDING LAYER
THICKNESS
Clay
27 in.
(675 mm)
24 in.
(600 mm)
5/8 in. to 1 in.
(15 to 25 mm)
Gravel
14 in.
(350 mm)
18 in.
(450 mm)
5/8 in. to 1 in.
(15 to 25 mm)
Clay
13 in.
(325 mm)
10 in.
(250 mm)
5/8 in. to 1 in.
(15 to 25 mm)
Gravel
7 in.
(175 mm)
4 in.
(100 mm)
5/8 in. to 1 in.
(15 to 25 mm)
TYPE OF
SUBGRADE
BASE
0-3/4 CRUSHED
STONE
BEDDING LAYER
CONCRETE SAND
Clay
26400 lb
12000 kg
1100 lb
500 kg
Gravel
19800 lb
9000 kg
1100 lb
500 kg
Clay
11000 lb
5000 kg
1100 lb
500 kg
Gravel
4400 lb
2000 kg
1100 lb
500 kg
*** The volumes vary according to the type of pavers or slabs used.
Joint sand quantities
Tools Required
Area covered by a 50 lbs (22,7 kg) bag of Techni-Seal
Polymeric sand, depending on type of paver.
• Wheelbarrow
• Two stiff pipes 1in. (2.5 cm)
in diameter and 10 ft. (3 m)
long
• One 1 in. x 6 in. x 8 ft. plank
(2.5 cm x 15 cm x 2.4 m)
• Wood stakes
• Level
• Twine
211.3 sq.ft.
19,63 m2
Champlain Paver
68.4 sq.ft.
6,36 m2
New England Paver
69.2 sq.ft.
6,43 m2
113.2 sq.ft.
10,52 m2
65.1 sq.ft
6,05 m2
203.6 sq.ft
18,92 m2
75.3 sq.ft
7,00 m2
Medium Curb
0,3
2
4
6
8
15
29
Lotus Stone
Regular Curb
0,3
2
4
6
8
15
29
Romance Paver
Plastic Curb
0,125
1
2
3
3
6
12
Ex.: 6 Econo curbs are required for 18 linear feet of curb.
MINIMUM
REQUIRED
EXCAVATION DEPTH
Required materials***
Classic Slab
18
TYPE OF
SUBGRADE
* These values are intended to serve as a guide, and are valid only for low traffic applications. Certain soil types that are very unstable or especially affected by freeze-thaw
cycles may require deeper excavation and thicker foundations. For areas with these soil types, or for large projects, we recommend consulting a geotechnical professionnal.
200
Number of slabs needed
Curbs
(pavers or slabs)
(2 3/8 in. / 60 mm
pavers or thicker)
Surface (sq. ft.)
10
Residential
Driveway.
Sidewalk
or Patio
Number of blocks needed
Ex.: 133 Sutton stones are required for a 35 sq. ft. wall.
PROJECT
(2 3/8 in. / 60 mm
pavers or thicker)
Surface (sq. ft.)
5
Excavation depth and base thickness*
Romance Slab
Iris Slab
Steps to follow for easy installation. (For more information, visit www.bolduc.ca)
• Line Level
• Chalk line
• Measuring Tape
• Broom
• Rake
• Shovel
• Paver chisel or concrete saw
• Vibrating plate
Pavers
Filling material (polymeric sand)
Concrete paver
Base
(crushed stone 0-3/4 in.)
Walls
Slabs
Filling material (optional)
Bed face
(concrete sand)
Concrete slabs
Base
(crushed stone 0-3/4 in.)
Subgrade
Excavation
Excavation must allow for a 2% or ¼inch-per-foot grade to ensure adequate
drainage. For details on required materials and excavation depths, see tables
above. Dig another 12 inches around the
surface to be paved to allow for curbs or
edge restraints and compaction.
Lotus Stones
Lotus stones are palletized in rows. Each row
has six different models. The stones must be
installed according to a specific interconnecting pattern.. Markers on the sides of the
stones make it easy to follow this pattern.
There are two types of marker:
Bed face
(concrete sand)
Large markers may be single or double. They must
be aligned one next to another.
Subgrade
Base
Excavation
Base
Excavation
Base
Spread 0-3/4-inch granular material
in 4-inch lifts. Compact the material at
each layer. Recommended compacting
equipment includes a vibrating plate, a
vibrating roller or a jumping jack tamper.
Once compacted, the base must have the
desired depth (see excavation depth and
foundation thickness table). Edging must
be completed before finishing the base.
Install one side of edging. To minimize
the need for cutting, install a temporary
row of pavers on the ground to determine
the ideal distance and position of the opposite edge. Once the second side of the
edging has been determined, install it and
compact behind it.
Dig a 6-inch base. In general, 10% of the
wall must be buried. Allow 8 to 12 inches
behind the wall for a drainage layer of
clean gravel. Protect the base and drainage layer against contamination by the
existing soil by covering the bottom and
back of the trench with geotextile fabric.
Allow for 12 extra inches of geotextile fabric to fold over the drainage layer once the
wall is completely erected.
Spread 0-3/4-inch granular material
and compact it with a vibrating plate or
a jumping jack tamper. Next, install a
4-inch perforated drain on the base.
Compact the trench behind it. Connect
the drain to the existing drainage system
in order to evacuate any accumulation of
water behind the wall.
Excavation must allow for a 2% or ¼inch-per-foot grade to ensure adequate
drainage. For details on required materials and excavation depths, see tables
above. Dig another 12 inches around the
surface to be paved to allow for curbs and
compaction.
Spread 0-3/4 inch granular material in
4-inch lifts. Compact the material after
each layer. Recommended compacting
equipment includes a vibrating plate, a
vibrating roller or a jumping jack tamper.
Once compacted, the base must have the
desired depth (see excavation depth and
foundation thickness table).
Narrow markers may be single, double or triple.
They are semi-cylindrical male-female types. Male
markers must be aligned with female markers
having the same number of grooves.
Preliminary
installation steps:
Prepare base and bedding sand according to
the recommendations listed in the Bolduc
Products Installation Guide.
Step 1
Install an initial Lotus stone, preferably
along one of the lines delimiting the area to
be paved. Identify its type (large or narrow)
and the number of markers (1, 2 or 3) on
its side. The stone illustrated in Figure 1 has
double narrow female markers.
Installation
Finishing
Spread a 5/8 to at most 1-inch thick layer
of concrete sand. Do not compact the
bedding sand. Level with a very straight
board. Walk on the pavers and stay off the
bedding sand during installation.
Stabilize the paved surface with a vibrating plate. Compact several times in both
directions. We recommend that you
spread bagged polymer sand and work
it into the joints by sweeping the surface
in all directions. Work the sand into the
joints with each passing of the vibrating
plate. A urethane plate between vibrating plate and pavers is recommended
to protect paver surfaces. Add sand as
needed. After sweeping the sand away and
using the blower, spray the pavers to wet
the joints and be sure to remove excess
water with the blower.
Special considerations
• Reno•Deco guide pavers are not designed for driveways.
• Fill all joints with polymer sand as soon as the installation is completed.
• Paver colors may vary. It is best to alternate pavers during installation.
• Never apply sealant within one year of installation.
• Concrete or plastic edging helps to maintain joint integrity.
• Consult our website at www.bolduc.ca to see laying patterns for each type of paver.
(For more information on polymer sand, see the video at the manufacturer’s website
www.techniseal.com)
Installation
Finishing
Place entire first row of blocks and make
sure they are at the right level. For Slope
Block I, buried rows as well as the first row
should always be installed with no spacing
between units. This is optional for the following rows. Always complete one row of
blocks before starting another. Put backfill behind the wall with clean gravel about
every 8 inches.
Do not allow spacing in the last row of
blocks. We also recommend that you
glue the last two rows of blocks or cap
stones using a good quality concrete adhesive. Fold up the excess geotextile over
the clean gravel at the level of the next to
last row of blocks. Fill up behind the last
row of blocks with existing soil or some
other appropriate material. Level blocks
so as to be able to complete your layout
to the wall.
Installation
Finishing (optional)
Spread a 5/8 to at most 1 inch thick layer
of concrete sand. Do not compact this
layer. Level with a very straight board.
Walk on the pavers and stay off the bedding sand during installation.
Spread bagged polymer sand and work it
into the joints by sweeping the surface in
all directions. Work sand into joints using
vibrating plate, which must be equipped
with urethane plate to protect slabs. Add
sand as needed. Make sure to sweep the
slabs thoroughly before completing the
installation by lightly spraying the paved
surface with water. Use no more water
than is necessary to penetrate to the base.
Special considerations
• Slab colors may vary. It is best to alternate slabs during installation.
• Never apply paver sealant less than one year after installation.
Special considerations
• Geogrids must be used to reinforce retaining walls if they exceed the maximum recommended
height.
• Blocks must cross over joints – never install them in a column.
• Blocks may vary in color. It is best to alternate blocks during installation.
• Sutton wallstones are finished on two sides. They can be used for walls visible on both sides.
• Champlain Antique wallstones: a bevelled stone and a crowning right-angle stone.
• Econo Split Face Slope Block II are split-faced on both sides. They can be used for walls visible
on both sides.
• Econo Slope Block I can be installed with closed joints or open to 2 inches. Use a foundation slab
for better stability and easier alignment.
• Slope Block I Classic can be installed with closed joints or open to 2 inches. Use a foundation
slab for better stability and easier alignment
• Slope Block I Regular 8” can be installed with closed joints or open to 2 inches. Use a foundation slab for better stability and easier alignment
(For more information on polymer sand, see the video at the manufacturer’s website
www.techniseal.com.)
Curbs (planter installation)
To improve stability, at least half the height of the curb should be buried in the ground. For example, a
6” curb by at most 3” and an 8” curb by at most 4”. Select curb size according to desired above-ground
height and determine how deeply it will be set into the ground. To determine excavation depth, allow
for another 4” for the 0-3/4” compacted base. Dig a 12-inch-wide trench to the desired depth.
Spread about 5 inches of 0-3/4” in the bottom of the trench and compact with a rammer. Check level
of compacted base and correct if necessary with sand or screenings. Fill trench on both sides of curb
with 0 3/4”. Compact each side, taking care not to shift curb sideways.
Step 2
On the palette, find the next stone with
markers that correspond to those on the
installed stone. In this example, you would
be seeking double narrow male markers
(Figures 2, 3 and 4).
Step 3
Continue installing following the same
principle. Identify the type of markers on
the stones in Figure 5. Then select the next
stones to be installed according to these
markers (Figures 6 and 7). Figure 7 shows
a close-up of an assembly of single narrow
female-male markers and a triplet of narrow
male-female markers.
Step 4
Continue the installation (Figure 8). Figure
9 shows a close-up of an assembly of single
large markers.
Final steps
Once the paving area is filled, begin sawing stones along the edge (optional) and install the
border stones. Fill joints according to the recommendations in the Bolduc Products Installation Guide.
Special considerations
• Slab colors may vary. It is best to alternate slabs during installation.
• Never apply paver sealant less than one year after installation.