Multilift Dealer Guide

Transcription

Multilift
Dealer Guide
Dec. 2005
Dealer Planning Guide Multilift
Savaria Inc.
Company intro
Savaria, one of North America's leading accessibility companies, was founded in 1979, and its present
management has been with the Company for over 16 years.
Savaria’s mission is to provide products that facilitate mobility of all people with special needs,
contributing to their well-being and quality of life.
Savaria stands behind all its products, which meet safety standard requirements for various countries
around the world. With the help of our network of over 250 distributors, our products are distributed in
North America, South America, Europe, and Australia. In addition, we now have an exclusive dealer
and partnership in Dubai, United Arab Emirates.
We manufactured over 4000 lifts and stairlifts in 2004. Savaria’s research and development
engineering team has created a second generation Telecab. The new vacuum formed plastic trims give
the Telecab a modern design. Let us not forget the Ultimo, our residential elevator that does not require
a machine room. It has a modular guide rail system and no machine room required for its roped
hydraulic drive with unique features. Our products contribute to a higher quality of life in homes and
businesses by improving access.
It is a pleasure to introduce you to Savaria’s complete line of accessibility products.
• V-1504
• Telecab
• Multilift
• ES-125
• Step-Saver™
• B.07
• Stairfriend™
• Ultimo
Vertical Platform Lift
Vanishing Residential Elevator
Residential Acme Screw Drive Vertical Platform Lift
Stair Platform Lift
Stairway Chairlift
Stairway Chairlift (battery, 110VAC power, or commercial)
Curved Stairway Chairlift
Residential or Commercial Elevator
We thank you for your support and interest in our company.
Cordially,
Marcel Bourassa, B.A.A.
President
Robert Berthiaume, P. Eng.
V.P. Marketing
4150 Autoroute #13, Laval, Québec, Canada, H7R 6E9
2
Tél.:(450)681-5655, Fax :(450)681-4745, http://www.savaria.com, [email protected]
Savaria Inc.
Definition of a Multilift vertical platform lift
The Multilift vertical Platform lift is design to provide easy access for the physically
challenge from a landing to another. The versatile design of this lift can be adapted to
most architectural requirements. It can be installed in homes, schools, churches,
municipals buildings, nursing homes, restaurants…
The Multilift vertical wheel chair platform lift with is ACME screw drive system
offers a safe and reliable operation for its users. This ruggedly constructed lift has
been proven for both indoor and outdoor applications. The Multilift vertical wheel
chair platform lift is designed to meet today's safety code requirements like ASME
A18.1 and CSA-B613 for residential use.
According to A.S.M.E. code a vertical platform lift is a powered hoisting and
lowering mechanism designed to transport mobility-impaired person on a guided
platform that travel vertically.
C.S.A. code define a vertical platform lift to a nonportable, permanently installed
elevating device for transporting persons with physical disabilities on a platform that
moves vertically between permanent levels.
3
Savaria Inc.
Table of contents
Company intro .................................................................................................................... 2
Definition of a Multilift vertical platform lift ..................................................................... 3
Table of contents................................................................................................................. 4
1- Benefits of using a Multilift vertical platform lift .......................................................... 5
2- Assistance ....................................................................................................................... 5
3- Technical analysis of a Multilift..................................................................................... 6
Specifications.................................................................................................................. 6
Warranty Highlight ......................................................................................................... 7
4- Multilift vertical platform lift ......................................................................................... 8
Anatomy of the lift.......................................................................................................... 8
Site construction details ................................................................................................ 10
Slab details ................................................................................................................ 11
Outdoor site construction detail ................................................................................ 12
4.1- 90 deg. Access (optional) ...................................................................................... 13
4.1.1-Site construction details................................................................................... 14
4.2- Commercial/Residential ........................................................................................ 16
5- Safety features .............................................................................................................. 17
5.1- Doors, gates & locks.............................................................................................. 17
5.1.1 Safety arm (optional) ....................................................................................... 17
5.1.2 Platform gate (optional) ................................................................................... 18
5.1.3 G.A.L. Type ‘N’ interlock ............................................................................... 18
5.1.4 Electric Strike................................................................................................... 19
5.2- Safety underpan ..................................................................................................... 19
5.3- Grab rail (optional) ................................................................................................ 20
7- Annex............................................................................................................................ 21
7.1- Dimensions ............................................................................................................ 21
7.2- Drawings................................................................................................................ 22
7.3- Electrical diagram.................................................................................................. 23
7.4- Installation instruction for Savaria Electric Strike 2083EJ ................................... 25
7.5- Architect specifications ......................................................................................... 28
4
Savaria Inc.
1- Benefits of using a Multilift vertical platform lift
¾ The most economical way for a wheelchair, to get from one landing to another
within 72’’(1823mm) of travel
¾ Machine room not require
¾ Quick delivery
¾ Easy installation
¾ Versatile design
¾ Indoor/outdoor application for residential/commercial (USA only) uses
¾ Travel up to 48’’(122mm) or 72’’(1823mm)
¾ Can be operated independently
¾ Easy electrical troubleshooting when required
¾ Can be customized for any needs, within the safety code parameters
¾ Relay logic controller
2- Assistance
For quick accurate help call:
(450)681-5655
Or
1(800)931-5655
You can also use our web sites:
www.savariadealers.com
www.savaria.com
To obtain your login and password contact your local Regional sales manager.
5
Savaria Inc.
3- Technical analysis of a Multilift
Specifications
Residential/commercial(USA) use
Complies with ASME A18.1 and CSA-B613
750 lb (340 kg)
Rated Load
Rated Speed (capacity) 8 feet/min (0.04 m/s)
Usable Car Dimensions 34”W x 54”L (864 x 1372 mm)
2
Levels Serviced
2
# of Openings
Non-skid platform surface
Platform
Front/rear or 90 exit (optional)
Car Access
Beige electrostatic powder coat paint on all steel surfaces and
Finish
vacuum-formed plastics.
48” (1219 mm) or 72” (1827 mm)
Maximum Travel
Keyed control station on car
Operations
Continuous pressure buttons on car
ACME screw and back-up nut
Drive System
1 hp (0.75 Kw) motor, 110 VAC
Power Supply
120 VAC, 20 AMPS, 1 PHASE, 60 Hz
(North America)
Power Battery lowering
Emergency stop on car
Emergency & safety
Platform safety underpan sensor
Automatic Safety ramp on platform
Electronic-free relay logic
Controller
Manual emergency lowering/raising device
Manual lowering
42” (1,067 mm) with metal inserts
Side Guard Panels
Application
*Consult local codes and regulations
6
Savaria Inc.
Warranty Highlight
¾ Repair or exchange any defective part for 36 months from date of lift
purchase.
¾ Labor charges are not covered for removal, repair or replacement of parts.
¾ To obtain warranty service, contact your authorized SAVARIA dealer.
¾ Warranty does not cover batteries, corrosion, malfunction or damage to lift
parts caused by accident, misuse, abuse or lack of proper maintenance,
neglect, improper adjustment, modification, alteration, the structural condition
of your building, overloading, failure to follow the lift operating instructions,
or acts of God (i.e. weather, lightning, flood, etc.)
¾ REMOVAL OF WARRANTY:

Installation or maintenance by someone other than an authorized
SAVARIA dealer.

Modification or alteration in any respect from its original design
without written authorization by SERVICES INDUSTRIELS
SAVARIA INC.

Not joining a Preventive Maintenance Program offered by an
authorized SAVARIA dealer and not having the lift inspected at
least once every 6 months or more frequent as use or environment
dictates.
¾ Extended Warranty available.
¾ Maintenance contract available thru your authorized SAVARIA dealer.
7
Savaria Inc.
4- Multilift vertical platform lift
The savaria Multilift is offered in several types of configurations.
Anatomy of the lift
The Multilift consists in a tower and a platform. Here is the general form of the
Multilift.
Number
1
2
3
4
5
6
Description
Front tower panel
Car operating panel (C.O.P.)
Side guard panel
Safety underpan sensors
Self support base
Tower cover
Number
7
8
9
10
11
-
Description
Tower
Non-skid platform
Automatic access ramp
Access ramp channel
Manual lowering device
-
8
Savaria Inc.
Here are the components of the drive tower.
Number
1
2
3
Description
Motor
Main pulley
V strap
Number
10
11
12
4
Controller box
13
5
6
7
8
9
Acme screw
Left roller guide
Lower bearing
Lower bearing plate
Self support base
14
15
16
17
18
Description
Battery (optional)
Battery tray
Pulley
Limit switches
(configuration and type may vary)
''U'' strut
Access ramp channel
Right roller guide
Cam assembly
Carriage assembly
9
Savaria Inc.
Site construction details
The self support base is anchored to a concrete slab, please see p.11 for slab
details. A slab or the floor has to support at least 3000 lb (13344 N). Make sure that the
slab floor is leveled.
10
Savaria Inc.
Slab details
Outdoor applications need a strong and stable support surface. This means a
surface that will not move throughout the years. For this reason, it is essential,
when temperature gets below the freezing point, to insert an insulate sheet
between reinforced concrete slab and compaction rock.
11
Savaria Inc.
Outdoor site construction detail
Number
1
2
3
Description
Top landing gate (42 in.
(1067mm) high min.)
(can be supplied by
Savaria)
Platform gate (optional
for residential use)
Number
Description
4
Disconnect and electrical outlet (refer
to electrical requirements)
Automatic access ramp
6
5
Call/send station (keep proper
distance from lift)
Fascia panel (must be installed to
eliminate pinch points )
12
Savaria Inc.
4.1- 90 deg. Access (optional)
The Multilift has been design to operate with front/back entry/exit. Savaria always
recommends using straight thru platforms. However 90 deg. exit could be the only
possibility. Here is the 90 deg. configuration.
13
Savaria Inc.
4.1.1-Site construction details
Number
Description
Number
1
Fascia panel
4
2
Concrete slab
5
3
Call/send station post
-
Description
Call/send station (keep proper distance
from lift)
Disconnect and electrical outlet (refer
to electrical requirements)
-
14
Savaria Inc.
Plan view
Make sure that there is no interference between the automatic access ramp and the fascia
panel.
15
Savaria Inc.
4.2- Commercial/Residential
Following are the requirements for commercial applications:
ASME A17.1: Enclosure or hoistway required
ASME A18.1 :
¾
¾
¾
¾
¾
¾
¾
¾
Grab bar
Emergency light on platform
redundancy controller
Emergency stop/alarm
Platform gate
Top landing gate
Disconnect (provided by others)
Door locks
CSA Multilift is not approved for commercial use in Canada
16
Savaria Inc.
5- Safety features
The Multilift has numerous safety features, here are some of the most important.
5.1- Doors, gates & locks
5.1.1 Safety arm (optional)
17
Savaria Inc.
5.1.2 Platform gate (optional)
The platform gate is an additional safety feature. (Optional for residential
use / required for public applications)
5.1.3 G.A.L. Type ‘N’ interlock
G.A.L. locks the door when the
platform is not at the landing.
18
Savaria Inc.
5.1.4 Electric Strike
The electric strike locks the door when the platform is operating or
at another landing.
Savaria electric Strike 2083EJ
¾ Non fire rated
¾ 12 VDC, 0.5 A
Von Duprin electric strike
¾ Fire rated
¾ 12 VDC, 0.5 A
See annex for installation & door preparation instructions.
5.2- Safety underpan
The safety underpan stops the
platform when an obstacle
obstructs lowering operation.
19
Savaria Inc.
5.3- Grab rail (optional)
The grab rail is optional for residential use, but required for commercial use. However,
Savaria recommends it for all application.
20
Savaria Inc.
7- Annex
7.1- Dimensions
21
Savaria Inc.
7.2- Drawings
22
Savaria Inc.
7.3- Electrical diagram
23
Savaria Inc.
24
Savaria Inc.
7.4- Installation instruction for Savaria Electric Strike
2083EJ
Electric connections
Solenoid
Red
Black
Green (not used, insulated)
Orange
Blue
Grey
Door closed contacts
Lip
Connection
Tripper
White
Blue
Yellow (not used, insulated)
Orange
Green (not used, insulated)
Grey
White
Blue
To controller
Yellow (not used, insulated)
25
Savaria Inc.
Savaria electric strike face plate dimension and overview
1
4
5 13/32"
1 13/16"
2 11/16"
5
2
27/32"
1 1/32"
3
1 11/16"
1 9/16"
3 3/8"
6 3/32"
Number
1
2
3
4
5
Description
Strike face plate
Strike mounting plate
Electric Strike
Flat head screw M4x0.7x10
Flat head screw M4x0.7x13
Savaria electric strike & mounting plate dimension
1 15/32"
25/32"
23/32"
3/8"
3 3/8"
1 11/16"
1 1/32"
21/32"
15/16"
1 15/32"
1 1/4"
2 13/32"
2
3
4 27/32"
26
Savaria Inc.
Door frame preparation for electric strike
Bevel at
60 deg. angle,
leave 1/8"
Bevel at
60 deg. angle,
leave 1/8"
Pilot drill for
#12 wood screw
3 13/32"
6 1/8"
4 7/8"
13/16"
5 13/32"
1 19/32"
1/8"
1 9/32"
1 19/32"
Face/top view
RHR shown (left hand)
LHR opposite (right hand)
27
Savaria Inc.
7.5- Architect specifications
Section14420
Typical acme screw drive vertical platform lift specifications
Savaria model MULTILIFT
1.0
GENERAL
1.1
DESCRIPTION
A.
The product described in this section is manufactured by Savaria Corporation Inc. It is a vertical platform lift
designed for either outdoor or indoor applications. The operating system is composed of the tower and the
lifting platform. The lift can be used for residential and commercial applications.
B.
Lifts shall be in accordance with local codes and regulations.
1.2
PREPARATORY WORK BY OTHERS
A.
The following preparatory work to receive the lifts specified in this section is part of the work by others:
Permanent 120 VAC, 20 amp single-phase power to operate lift to be provided from a lockable
fused/cartridge type disconnect switch. Refer to drawings for permanent power specifications and location of
disconnects. Temporary power may be provided to expedite installation of lift.
1.3
QUALITY ASSURANCE
A.
SUBCONTRACTOR QUALIFICATIONS:
Execute work of this section only by a company that has adequate product
liability insurance.
Skilled tradesmen must be employees of the installing contractor approved by the lift manufacturer, with
demonstrated ability to perform the work on a timely basis.
B.
MANUFACTURER:
1.
Company with not less than 20 years of experience in the design,
fabrication and assembly of platform lifts.
1.4
SUBMITTALS
A.
Shop drawings – the shop drawings shall show a complete layout of lifting
B.
Submit physical samples of all items requiring selection of color or finish.
1.5
MAINTENANCE
A.
The lift shall be cleaned regularly and inspected at intervals no longer than every 6 months.
1.6
WARRANTY
equipment detailing dimensions and clearances as required.
A.
Unit shall have a 30-month limited parts warranty on every component. The warranty doesn’t cover labour. Refer
to product
2.0
documentation.
PRODUCTS
2.1
PLATFORM LIFT
A.
Basic specifications for Savaria ACME screw drive vertical platform lift model MULTILIFT:
28
Savaria Inc.
1.Rated load…...…………………………………………..……..……………………..………...750 lb (340 kg)
2. Rated speed………………………………………………………………….…………….±8 f.p.m (0.04 m/s)
3. Usable car dimensions………………………………………..…………...…34”W x 54”L (864 x 1,372 mm)
4. Levels serviced …………………………………………………..……………………...……………………2
5. Number of openings…………………………….………………………..…………………………………..2
6. Car access………………………………..………………….……………….…………...Front/rear or 90 exit
7. Travel…………………………………………………………. …………48” (1,219 mm) or 72” (1,827 mm)
8. Operations……………………………………………………..…………………………….constant pressure
9. Drive system………………………………..……..……….….……………….ACME screw and back-up nut
10. Power supply (North-America)……………… ………...….………120 VAC, 20 AMPS, 1 PHASE, 60 Hz
11. Controller………………………………………………………...………….……Electronic-free relay logic
12. Side guard panels…………..……………….…………………………....42” (1,067 mm) with metal inserts
2.2
CAR OPERATION
A.
Car operating panel shall consist of constant pressure buttons or rocker
switches, an emergency stop button, and an on/off key switch.
B.
Emergency operation- A manual handcrank is used to lower or raise the platform in case of emergency.
2.3
ACME SCREW DRIVE
A.
The screw should have a diameter of 1’’ and a back-up nut shall be installed for security reasons. No brakes
are required.
2.4
A.
LEVELLING DEVICE
All limit switches and levelling device switches shall be located in a position to be inaccessible to unauthorised
persons. They shall be
located behind the mast wall and be accessible through removable panels.
2.5
CALL STATIONS
A.
Provide a surface, flush, or doorframe mounted call/send station.
2.6
TERMINAL STOPPING DEVICE
A.
Normal terminal stopping devices shall be provided at top and bottom of runway to stop the car positively and
automatically.
2.7
A.
GUIDE RAILS AND BRACKET
Guide rails and brackets shall be used to guide the platform and sling. Roller guide shoes are bolted to the
platform to make it roll on the
rails. Guide rails shall form part of the structural integrity of the unit and be
integral to the mast enclosure, ensuring stability and minimum platform deflection when loaded.
2.8
CAR SLING
A.
Car sling shall be fabricated from steel tubing 44” high (1,117 mm) with adequate bracing to support the
platform and car enclosure. Roller guide shoes shall be mounted on the top and bottom of the car sling to
engage the guide rails. Guide shoes to be roller type with 3” diameter wheels.
2.9
WIRING
A.
All wiring and electrical connections shall comply with applicable codes. Insulated wiring shall have flameretardant and moisture proof outer covering and shall be run in conduit, or electrical wire ways.
2.10
COMMERCIAL APPLICATIONS
A.
An emergency stop button, an alarm and an emergency light shall be integrated on the car station to comply
with ASME A17.1
and A18.1.
A.
EXECUTION
EXAMINATION:
29
Savaria Inc.
All site dimensions shall be taken to ensure that tolerances and clearances have been maintained and meet
local regulations.
B.
PREPARATION:
Pre-inspect the construction and service requirements for work by others. These requirements will be
included in drawings, diagrams, engineering data sheets and special instructions before the work begins.
INSTALLATION:
Install all the components of the lift system that are specified in this section to be provided, and that are
required by jurisdictional authorities to license the lift.
1.
Trained employees of the lift contractor shall perform all installation work of this section.
2.
Adjust lift for proper operation and clean unit thoroughly.
3.
Instruct users and owner’s maintenance personnel in proper troubleshooting and maintenance
procedures.
END OF SECTION
30