In 1957 Knudson developed its first metal roll forming machine and

In 1957 Knudson developed its first metal roll forming machine and

In 1957 Knudson developed its first metal roll forming machine and for
more than the last half century, they have earned a reputation for
building the most durable and reliable machines in the world.
Reliable, durable and tough.
That’s our reputation.
Every machine we produce backs it up. Framing, roofing, and specialty contractors around the world have
chosen Knudson machines to fuel their businesses for over 50 years. We’re an international leader in designing
and manufacturing on-site and in-plant light-gauge and medium-guage roll forming equipment. We have the
right machine for you.
With more than half a century of experience under our belts, we’re one of the county’s most
prominent manufacturers of on-site roll forming equipment. In fact, we produce the most
dependable equipment of its kind.
There’s only one Knudson. Commercial. Military. Disaster recovery. Residential.
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com
Framemaker Platinum
Ideal for Residential and
Light Commercial Construction
The Framemaker Platinum is our fastest growing
integrated system, with the most complete stud and
track size range available on the market.
Stud and Track Sizes
Web: 3.50, 4.00, 5.50, 6.00, 8.00 (inches)
Flange: Stud: 1.63 – Track: 2.00 Maximum
Lip Up to 0.75 (inches)
R: 0.090 (inches) Inside Bend Radius
You can also add in-Line Printing, and
PC-Controller Software allowing you to label
components and control your machine from your
computer. Each option may be included with your
machine or added later as your needs evolve.
• Touch Screen Digital Controller
• INKJET Printer is available with
all FRAMEMAKER Series
Stud & Track
Components Features
All our Framemaker Series can be set-up with a
Service Hole, Dimple Punch, Index/Bolt Hole and Web-notch tools.
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com
Framemaker KS1420 Gold
Ideal for commercial framing
The KS-1420 Gold is our largest and most powerful stud and track
framing machine. It forms 14 to 20 gauge steel into six component
widths and three heights.
Stud and Track Sizes
Web: 3.63, 4.00, 6.00, 8.00, 10.00 and
12.00 (inches)
Flange: 1.63, 2.00 and 2.50 (inches)
Lip: Up to 0.75 (inches)
R: 0.120 (inches) Inside Bend Radius
Framemaker KS1622 Silver
Ideal for residential framing
The KS-1622 Silver is a versatile stud and track
framing machine. It forms 16 to 22 gauge steel into
six component widths and three heights.
Stud and Track Sizes
Web: 3.50, 3.63, 4.00, 5.50, 6.00 and
8.00 (inches)
Flange: 1.63, 2.00 and 2.50 (inches)
Lip: Up to 0.75 (inches)
R: 0.090 (inches) Inside Bend Radius
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com
Framemaker KS2025
Commercial and residential framing
The Framemaker KS-2025 is our fast and efficient
non-structural stud and track machine. It is able to
form 20 to 25 gauge steel into five component web
widths and one flange height. It has a nominal speed
of 85 ft per minute.
Stud and Track Sizes
Web: 1.63, 2.50, 3.63, 4.00 and 6.00 (inches)
Flange: 1.25 (inches)
Lip: Up to 0.30 (inches) maximum
R: 0.060 (inches) Inside Bend Radius
Framemaker KS35X
Commercial and residential framing
The Framemaker KS35X is a cassette-based system designed for rapid change-out of small component-forming
cassettes. The system includes a base frame housing the power, hydraulics and control, along with a variety of
interchangeable forming cassettes.
With a base Cassette in-house, the KS-35X system allows you to expand your component offerings at minimal
cost to you. As your business grows, so do your capabilities.
Stud and Track Sizes
Web: 3.63, 4.00, 6.00, 8.00, 10.00 and 12.00 (inches)
Flange: 1.63, 2.00 and 2.50 (inches)
Lip: Up to 0.75 (inches)
R: 0.120 (inches) Inside Bend Radius
Custom Component Cassettes
Our library consists of nearly 16 different components
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com
KR18 Black
Roofing Panel Machine
Structural (Low Slope) Profile Machine. KR-18 continues to
lead the market with its exceptional design and engineering.
Profile specification:
2.5 Standing Seam profile with
Trapezoidal offsets.
Leg height: 2.50 in
Head width: 0.75
Characteristics
Max Speed: 90ft p/min
UL 90 Panel
Options
• Trailer (10,000 –lb cap.)
• Gas or Electric Motor
• Oiler Kit
Panel width 457.2 mm
Height 63.5 mm
• GPS System
• Run-out table
KR24 Black
Roofing Panel Machine
These compact machines can be trailer-mounted
and powered by either gas engine or electric motors.
Characteristics
Max Speed: 100ft p/min.
Compact main forming rollers
Easy changeover
Touch Screen Digital Controller
UL 90 Panels of 11/2 - 2 inch standing seam
Options:
• Trailer (10,000 –lb cap.)
• Gas or Electric Motor
• Oiler Kit
• GPS System
• Run-out table
• Electric Seamers & Hand Crimpers
Types of profile produced:
UL
UL
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com
Technical Specifications
Framemaker
Platinum
KS-2025
Multiprofile Machine
Multiprofile Machine
Multiprofile Machine
Multiprofile Machine
Light and heavy
commercial structures
Residential and
light commercial
Residential and
light commercial
Drywall
Non-structural walls
Hat Channel and
cassette
Single machine
Single machine
Two machine
Single machine
Base + tooling cassette
Model
KS-1420 Gold
Description &
Primary Purpose
Multiprofile Machine
Number of Machines
KS-1622 Silver
Structural Stud and Track
Configuration
Stud
Profile size in inches
3.63
4.00
6.00
8.00
10.00
12.00
Track
3.75
4.13
6.13
8.13
10.13
12.13
Stud
3.50
3.63
4.00
5.50
6.00
8.00
Non-Structural
Track
3.63
3.75
4.13
5.63
6.13
8.13
KS-35X
Stud
3.50
4.00
5.50
6.00
8.00
Stud
Track
3.63
4.13
5.63
6.13
8.13
Track
1.63
2.50
3.63
4.00
6.00
Stud
1.75
2.63
3.75
4.13
6.13
Track
C Channel
L Profile
Omega
U channel
Flange height
size in inches
1.63, 2.00, 2.50
1.63, 2.00, 2.50
1.63
1.25, 1.25,
Limited per profile and
coil size
Steel Gauge Range
14-20G
16-22G
16-22G
20-25G
16-25G
Service Hole
Yes
Yes
Yes
Yes
n/a
Dimple Tool
Yes
Yes
Yes
n/a
n/a
Index Hole Tool
Yes
Yes
Yes
n/a
n/a
Knurling Tool
n/a
n/a
n/a
Yes
n/a
Roll Forming Station
10
10
10
10
6 or 8
Max Production Speed
60-ft per min
75-ft per min
130-ft per min
85-ft per min
60-ft per min
Main Drive Power
10HP
10HP
10HP
10HP
7.5HP
Hydraulic Oil Cooler
Yes
Yes
Yes
Yes
Yes
Voltage
440/380/220
440/380/220
440/380/220
440/380/220
220/380
Line Frequency
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Length
190in
4,267mm
166in
4,220mm
174in
4,420mm
144in
3,658mm
102in
2,590mm
Width
32in
820mm
32in
820mm
36in
915mm
36in
915mm
36in
915mm
Height
50in
1,270mm
50in
1,270mm
62in
1,575mm
62in
1,575mm
64in
1,610mm
Weight
4,600lbs
2,087kgs
4,000lbs
1,820kgs
4,850lbs
2,200kgs
5,100lbs
2,314kgs
2,050lbs
928kgs
Touch Screen XL206
or Becks SII
Touch Screen XL206
or Becks SII
Touch Screen XL206
or Becks SII
Touch Screen XL206
or Becks SII
COBALT
Printer OPTIONAL
Inkjet Printer
fully integrated
Inkjet Printer
fully integrated
Inkjet Printer
fully integrated
Inkjet Printer
fully integrated
n/a
Decoiler
(maximum load)
5,000lbs
5,000lbs
5,000lbs
5,000lbs
5,000lbs
Powered Decoiler
OPTIONAL
10,000lbs
10,000lbs
10,000lbs
10,000lbs
10,000lbs
Software
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
Country of origin
Made in the USA
Made in the USA
Made in the USA
Made in the USA
Made in the USA
Digital Controller
The leader in roll forming machines since 1957.
Knudson Manufacturing, Inc. • 10401 West 120th Avenue • Broomfield, CO 80021 U.S.A. • (800) 548-2622 • www.knudsonmfg.com