click here - Carbon Impact

THE INVENTOR OF
THE CARBON ARROW
1 ST WRAPPED CARBON
SHAFT FOR HUNTING
Pierre Pujos invented and developed
the world’s first all-carbon arrow in
1985. He created a revolution which
forever changed the way archers
look at arrow speed, durability and
accuracy. Thanks t o h i s i n v e n t i o n
a rc h e r s a n d bowhunters around
the world started to switch from the
In 1995, Pierre pushed the technology
to new extremes by wrapping the carbon fibers to create a highly reinforced
hunting shaft, which was stronger,
lighter and stiffer than his first design.
The result was the world’s first wrapped
carbon shaft developed for bowhunters
under the Carbon Impact name.
E X C L U S I V E X LT
TECHNOLOGY
In 2002, Pujos introduced the new
exclusive XLT technology. The XLT
seamless design allows for a very
high spine-to-weight ratio, giving
excellent speed, outstanding durability and amazing consistency. All
Carbon Impact XLT shafts are
constructed using the unique
seamless XLT process: It is what
makes them not only straight, but
strong, quiet and consistent.
old aluminum arrow design to the
new carbon fiber construction.
Under his direction carbon arrows
took several world championship
and olympic gold, silver and bronze
medals.
The XLT technology allows for the
design of a hunting shaft that delivers
uniform spine not only from one
arrow to the next, but also 360° all
around the shaft.
XLT means consistency for each
and all the shafts within a dozen.
For the archers and the hunters
Pujos developed new technologies
that proved devastating in the field.
Forget about the flyers! – those three
or four inconsistent shafts that don’t
group with the rest of the dozen!
For the archers and the hunters,
Pujos has been developing new
technologies that prove devastating in the field.
2
Jaso
with n Allen, h
Mo n t
o
ana Wst of "T
he R
hitet
ush"
ail
S E A M L E S S X LT
TECHNOLOGY
For Hunter + we took the proven
XLT technology and made a strong
but fast enough shaft for all hunting
situations. There is no seam in the
material, so Hunter + XLT shafts
perform flawlessly and with consistency. Grouping is guaranteed.
BEST CAMO – PERIOD!
This new camo technology not only
provides superb “fit and finish” but
also excellent durability, reduces
friction noise on the rest and does
not add any weight to the shaft!
3 SPINES, 3 GRADES
TOUGH!
Yellow:
Blue:
Hunter + XLT will outperform many
other shafts due to its incredible
spine, precision, weight consistency
and straightness...it will keep on
hitting hard and centered – year
after year!
Straightness
Weight
Variance
5000: 6.9
6000: 7.9
6500: 8.3
+
+
+
+
- .003"
5000: 6.9
6000: 7.9
6500: 8.3
+
+
+
+
5000: 6.9
6000: 7.9
6500: 8.3
+
+
+
Orange: +- .002"
- .006"
1gr.
1gr.
- 1gr.
3gr.
3gr.
- 3gr.
4gr.
4gr.
- 4gr.
3
SMALL DIAMETER
HUNTING SHAFT
FRONT WEIGHT
DESIGN
Small diameter carbon arrows used
to be the standard a couple of years
ago, and hunters everywhere loved
them; very strong, amazing penetration, resistance to side wind, they
had only one drawback: the overlapping point outsert.
The HOT shaft offers excellent
accuracy due to the built-in front
weight design provided by our exclusive XLT process that places more
carbon fiber at the front of the shaft.
HALF-OUT
POINT INSERT
The point insert is located half
inside the shaft, and half outside
(HOT Technology). The outside part
is flush fitting with the shaft and is of
the exact same diameter. It is easy
to install, easy to tune and allows
for perfect broadhead alignment.
4
X LT T E C H N O L O G Y
Like all Carbon Impact shafts, the HOT
Shaft takes its amazing properties
from the XLT seamless technology
and unlike wrapped shafts they are
strong, consistent…devastating!
2 SPINES, 2 GRADES
Straightness Weight
Variance
Yellow:
+
- .003"
55/65: 8.7
65/75: 9.6
+
+
Blue:
+
55/65: 8.7
65/75: 9.6
+
+
- .006"
3gr.
- 3gr.
4gr.
- 4gr.
h
llen wit
Jason A kota Antelope
a
North D
HIGHER SPEED FOR
T H E B OW H U N T E R
Fast Shaft XLT delivers extra speed
and flatter trajectory to the demanding
bowhunter. It is lighter by 25 grains
than the renown Fat Shaft which it is
designed from: the bowhunter will put
this extra speed to good use with a
flatter trajectory and an increased
F.O.C. balance for more accuracy.
FOR
FIELD
AND 3 D
The weight
s av ing s o f all
spines make it
the shaft of choice
for archers who shoot
3D and Field in Europe
and around the world.
4 SPINES, 3 GRADES
Straightness
+ .001"
Weight
Green:
-
4000: 5.6
5000: 6.2
6000: 7.3
6500: 7.9
Variance
+ 1gr.
+ 1gr.
+ 1gr.
+ 1gr.
Yellow:
+
- .003"
4000: 5.6
5000: 6.2
6000: 7.3
6500: 7.9
+
+
+
+
Blue:
+
4000: 5.6
5000: 6.2
6000: 7.3
6500: 7.9
+
+
+
+
- .006"
-
3gr.
3gr.
3gr.
- 3gr.
4gr.
4gr.
4gr.
- 4gr.
5
hery
k Arc
c
o
R
– Red
Gould ion, CO
t
t
e
r
B
Junct
Grand
MORE WEIGHT FOR
H E AV Y H I T T I N G
Hunting arrows depend on kinetic
energy to deliver the punch that
drives broadheads through tough
hide and bone. Titan XLT gives
you the edge you need to
take on the big guys!
Whether you are after
moose, bear or that
monster buck, Titan
XLT will provide
all the power
you need.
TOUGHEST AND
QUIETEST SHAFT
Titan XLT is not only giving the
hunter increased kinetic energy
and extra penetrating power, but by
also having more weight in the front
of the shaft (front weight design
FWD) delivers superior accuracy. All
this wrapped up in the quietest and
toughest shaft you can find.
2 SPINES, 2 GRADES
Straightness Weight
6
Variance
Yellow:
+
- .003"
55/65: 9.8 +- 3gr.
65/75: 10.6 +- 3gr.
Blue:
+
55/65: 9.8 +- 4gr.
65/75: 10.6 +- 4gr.
- .006"
Shan
e
T a n e Fitzgeral
d
ytow
n , M – Bowhu
nter’s
D
Den
WORLD’S FIRST BUILT-IN
ARROW STABILIZER
Stealth XLT is the first arrow shaft in
the world to feature a unique built-in
arrow stabilizer. This vibration dampening device is factory installed at
the optimum point within the arrow
shaft in order to stabilize the arrow
in flight quicker.
F O R G I V I N G
The Stealth “built-in arrow stabilizer”
has the unique ability to smooth out
the arrow oscillation in flight, and
helps optimize the Front-Of-Center
( F. O . C . ) b a l a n c e , r e s u l t i n g i n
increased accuracy, penetration
power and forgiveness.
D E A D LY S I L E N T !
Seamless
X LT
Shaft
Increased
F.O.C.
Knockdown
Power
Built-in
Arrow
Stabilizer
Factory
Installed
Flight
Stabilization
The exclusive Stealth arrow stabilizer
dampens vibration and noise of the
shaft during flight and on the rest
during the draw. If you have ever
scared an animal during the draw or
had one duck at the sound of your
arrow then you can easily understand the value of the Stealth
arrow technology!
3 SPINES, 2 GRADES
Straightness Weight
Variance
Yellow:
+
- .003"
5000: 9.1
6000: 9.4
6500: 9.8
+
+
+
Blue:
+
5000: 9.1
6000: 9.4
6500: 9.8
+
+
+
- .006"
3gr.
3gr.
- 3gr.
4gr.
4gr.
- 4gr.
7
Darton Lightning Crossbow
FITS ANY CROSSBOW
(with a 110 gr. head) for flatter
The Ultrabolt and Titan Bolt XLT are
trajectory. Titan Bolt is designed to
COMPONENTS
fully compatible with any crossbow.
stay within the 350 FPS (legal speed
Ultrabolt XLT and Titan Bolt XLT come
Featuring outside diameters of
in many states) with a total weight
in 20" and 22" with a choice of back
22/64" and available in 20" or 22"
of 525 grs: devastating on impact!
components (V-Nock, flat insert), to
lengths, they are fully reinforced for
adjust to any crossbow. The flat insert
amazing strength and consistency
is designed to allow easy removal of
(XLT Technology).
the bolts from targets.
HIGH SPEED AND
8
CHOICE OF
Ultrabolt Point Insert: 15 gr.
LEGAL SPEED LIMIT
Titan Point Insert: 110 gr.
Ultrabolt is designed to increase
V-Nock: 8 gr.
speed with a total weight of 435 grains
Flat Insert: 12 gr.
A N O U T S TA N D I N G
C O M P O U N D A R R OW
Fast, easy to tune and very strong,
Carbon Youth arrows provide flat
trajectory, plenty of rest clearance
and outstanding durability. All of this
adds up to an arrow that gets kids
excited about archery and parents
excited about affordability!
2 SPINES READY TO GO
For safety warning, see page 15.
Carbon Youth arrows come standard
with Press Fit Nocks and can be
fitted with either point inserts or
target points.
AVAILABLE IN 2 SPINES:
3500 – 26” LONG
5500 – 28” LONG
Point Insert: 12 gr.
1.8"
Half-Out Insert: 20 gr. for HOT Shaft.
Break-off Point:
High Speed:70-90 gr. & 80-100 gr.
High F.O.C: 80-100gr. & 100-120 gr.
2.5"
3.8"
4.5"
Size
1.8"
2.5"
3.8"
4.5"
•
•
•
•
•
Length
1-3/4"
2-1/2"
3-3/4"
4.5"
•
•
•
•
•
Height
.385"
.415"
.475"
.500"
•
•
•
•
•
Weight
3 Grains
5 Grains
7 Grains
11 Grains
An activator applied to the vane base improves adhesion.
Never clean the vane base before installing.
Instant fletching glues (Cyanoacrylate) are recommended.
Press Fit Nock: 13 gr.
Rotonock: 11 gr. (Insert + Nock)
HOT Shaft Press Fit Nock: 10 gr.
Revolutionary shape for less wind resistance,
high profile for maximum arrow steering and
better flight.
Size
2"
•
•
Length
2.1"
•
•
Height
.560"
•
•
Weight
7 Grains
An activator applied to the vane base improves adhesion.
Never clean the vane base before installing.
Instant fletching glues (Cyanoacrylate) are recommended.
Yellow
Lime
Yellow
Red
Green
White
Orange
Blue
Orange
Blue
Black
White
Red
9
FLUSH FITTING
BREAK-OFF POINT
INTERNAL
PIN NOCK SYSTEM
UNMATCHED WEIGHT
TO SPINE RATIO
ULTRA PERFORMANCE
AND ULTRA PRECISION
Built for outdoor target archers,
FITA, field…Ultra Fast are incredibly
fast, responsive, and accurate!
The lighter spines offer unmatched
weight-to-spine ratios for FITA
style recurve shooters. The heavier
spines offer more weight for better
stability and resistance to wind
drift for compound shooters.
ULTIMATE INTERNAL
COMPONENTS
3 GRADES
Straightness
Shaft Weight Variance
+
+
Flush fitting break-off points come
in a lighter version (stainless steel)
for flatter trajectory, or in a high
F.O.C. (brass) version for increased
accuracy and forgiveness.
Green:
The push-on internal pin nocks provide precise alignment for increased
accuracy. Pin nocks are available in 2
sizes; large (.098") and small (.088").
Yellow: +- .006"
- .003"
- 1gr.
Ultra High Quality For Top Target Archers
Orange: +- .004"
+
- 2 gr.
Excellent Quality For Tournament Shooters
+
- 4 gr.
Best Value for all Target Archers
9 SPINES
Spine Weight
1200:
950:
820:
710:
620:
550:
10
4.4
4.9
5.5
6.8
7.4
7.8
grain/ inch
grain/ inch
grain/ inch
grain/ inch
grain/ inch
grain/ inch
For FITA and
recurve target shooters
500: 8.6
450: 8.9
400: 9.4
grain/ inch
grain/ inch
grain/ inch
For compound field
archers and 3-D shooters
A GREAT ARROW FOR
MID-LEVEL SHOOTER
5 SPINES FOR RECURVE
AND COMPOUND
The Super Club arrows offer the
intermediate target archer a high
t ech full feat ured arro w: s mall
diameter, internal components and
amazing stiffness for the weight.
Super Club arrows are available in
10/20, 15/25, 20/30 for recurve
shooters (10 lbs. up to 35 lbs.) and
30/40, 40/50 for compound shooters
(30 lbs. up to 55 lbs.). Proper spine
and arrow weight can be achieved
for every shooter down to the very
lowest draw weight.
Flush fitting internal glue-in points,
promote easy removal from target.
Internal push-in nocks allow for
easy nock clearance, perfect alignment and consistency.
Designed for recurve and compound bows, they offer accuracy,
durability and speed.
FLUSH FITTING
TARGET POINT
INTERNAL
PUSH-IN NOCK
SUPER STRONG
CONSTRUCTION
HOW TO USE THE CHART
C H A R T S TA N D A R D S E T T I N G S
1) Select the type of bow you use –
Recurve column: A Compound column: B
2) Select your arrow length in row C Correct
arrow length is from nock groove to end of shaft.
Adjustment
to the Chart
a) Front weight different
than standard setting – If
lighter by 20 (40) grains
move your correct peak
draw weight box 1 (2) row
up. If heavier by 20 grains
move 1 row down.
b) Compound bows different
than Soft Cam – For Hard
Cam Bows move your peak
draw weight box 1 row
down. For Round Wheel
Bows move your peak draw
weight box 1 row up.
c) Finger Release – move
your correct spined shaft
box 1 row down.
3) Select your draw weight in column A or B
4) Your correctly spined shaft is in the box
at the intersection of the row selected in 3).
and the column selected in 2).
This chart was established using a Modern
Recurve Bow with finger release or a Soft Cam
Bow with release aid and Ultra Fast arrows with
75 grain target point.
A
Correct Spine Selection
RECURVE
BOWS
UF: ULTRA FAST • SC: SUPER CLUB
Arrow length from nock groove to end of shaft
C
B
COMPOUND
BOWS
Finger
Release
23"
23 TO 26
UF 1200
SC 1020
UF 1200
SC 1020
UF 1200
SC 1020
UF 950
SC 1525
UF 820
SC 1525
UF 820
SC 2030
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 3040
UF 550
SC 3040
34 TO 40
26 TO 29
UF 1200
SC 1020
UF 1200
SC 1020
UF 1200
SC 1020
UF 950
SC 1525
UF 820
SC 1525
UF 820
SC 2030
UF 710
SC 2030
UF 710
SC 3040
UF 620
SC 3040
UF 550
SC 3040
40 TO 43
29 TO 32
UF 1200
SC 1020
UF 1200
SC 1020
UF 950
SC 1525
UF 820
SC 1525
UF 820
SC 2030
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 3040
UF 550
SC 3040
UF 550
SC 3040
43 TO 46
32 TO 35
UF 1200
SC 1020
UF 1200
SC 1020
UF 950
SC 1525
UF 820
SC 1525
UF 820
SC 2030
UF 710
SC 2030
UF 710
SC 3040
UF 620
SC 3040
UF 550
SC 3040
UF 500
SC 4050
46 TO 49
35 TO 38
UF 1200
SC 1020
UF 950
SC 1020
UF 820
SC 1525
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 2030
UF 620
SC 3040
UF 550
SC 3040
UF 500
SC 4050
UF 450
SC 4050
49 TO 52
38 TO 41
UF 1200
SC 1020
UF 950
SC 1525
UF 820
SC 1525
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 3040
UF 620
SC 3040
UF 550
SC 4050
UF 500
SC 4050
UF 450
SC 4050
52 TO 55
41 TO 44
UF 950
SC 1020
UF 820
SC 1525
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 2030
UF 620
SC 3040
UF 550
SC 3040
UF 500
SC 4050
UF 450
SC 4050
UF 400
SC 4050
55 TO 58
44 TO 48
UF 820
SC 1525
UF 710
SC 2030
UF 710
SC 2030
UF 620
SC 2030
UF 620
SC 3040
UF 550
SC 3040
UF 500
SC 4050
UF 450
SC 4050
UF 400
SC 4050
UF 400
SC 4050
58 TO 61
24" 25" 26" 27" 28" 29" 30" 31" 32"
Soft Cam
11
U LT R A
DAMPENING
This patented gel system is
unique: The carbon tube is filled
with a shock absorbing gel and
a suspended mass. When the
bow vibrates, the
mass counteracts,
taming bow
shock.
• EXCLUSIVE
CARBON FIBER TUBES
• PATENTED GEL
TECHNOLOGY
• ULTRA LIMBSAVER
DAMPENER
Superfat
5.0" – 7.0 o.z.
The
Carbon Gel
Ultra will not
leak or freeze in
varying temperatures. Proven
technology for amazing results!
.
.S
U
L Q UICKL
NA
O
C
K
BALANCING &
DAMPENING
• EXCLUSIVE
CARBON FIBER TUBES
The internal CS gel masses
move freely inside the tube and
counteract the vibrations
received from the bow.
The Doinker dampener
works 360° with the
front mass to
counteract
bow torque
• REVOLUTIONARY “CS”
GEL TECHNOLOGY
• EXCLUSIVE DOINKER
DAMPENER
Fat
7.0" – 5.2 o.z.
and recoil. The
carbon fiber tube
makes up the lightweight body while the
fiber bonding resin helps
dampen shock.
T
P
IO
NA
L Q UICKL
O
C
K
S
O
11" – 6.0 o.z.
12
T
P
IO
S
O
7.5" – 9.0 o.z.
nt
te
Pa
5
75
81
6
#6
QUATRO LS
The Quatro LS stabilizer is a
shorter and lighter version of
the well established
C a r b o n Q u a t ro
s t a b i l i z e r. I t
features 4
dampening
carbon
rods,
• REINFORCED CARBON 4-RODS
• TUNABLE SLIDING MASS
• BALANCES THE BOW
Q U AT R O
DOINKER
Includes an integrated Quicklock,
4 dampening carbon rods, a
tunable free-floating sliding
mass, and the exclusive Doinker
System in the front. Length: 11",
weight: 9.0 o.z.
The new tournament pro rest
offers unmatched smoothness,
accuracy and precision. Pro rest
is expertly machined from aircraft grade aluminum for
extremely tight tolerances with
no slop or play. You get reliable
repeatability with the forgiveness of a drop-away.
You have never experienced
anything like this release before!
Two opposing ball bearings offer
the smoothest sear mechanism
ever. You can feel the difference.
The wrist release is fully tunable
for tension as well as fit so you
can achi ev e t he ul t imat e in
shooting accuracy.
a tunable
sliding mass and
the famous Ultra
LimbSaver Dampener.
Its length is 6.5" (5.3 o.z.)
and comes in Hardwood
HD camo.
The new showcase T-release
features a smooth thumb activated trigger that engages a dual
sear mechanism. This design offers
a crisp release regardless of draw
weight because bow tension
and load are isolated from the
trigger. The showcase release
easily
adjusts both
tension and trigger
travel and can be
used with a bowstring
loop or the included
release rope.
13
QUATRO 4-ROD
These 4-rod stabilizers come in
24" and 31" both equipped with
free floating sliding mass.
HEXO 6-ROD
33" 6-rod stabilizer features a
silencing sliding weight for
micro-adjustment of stiffness
and dampening properties.
HEXO V-BAR
Revolutionary 33" 6-rod V-Bar
System with the same adjustable
sliding weight as the Hexo
stand-alone.
QUICKLOCK
To attach or detach any target
stabilizer with one simple twist.
Will not vibrate loose.
Will keep V-Bars
leveled. Fits
any Carbon
Impact target
stabilizer.
14
A S S E M B LY
SAFETY WARNING
SHOOTING PRECAUTIONS
B OW H U N T I N G P R E CA U T I O N S
1. Inspect the arrow shaft – If carbon
Arrow shafts could break after being shot into an
animal, resulting in many sharp splinter-like
fragments inside the animal. They can be harmful
if ingested, therefore:
1. Use caution when field dressing game
animals to avoid splinters of carbon fiber.
arrows are abused, hit by other arrows or
slapped against hard objects, damage to the
shaft could occur. Carbon arrows should always
be gently flexed and twisted end-to-end and
visually inspected prior to each shooting.
Warning: A damaged shaft could fail upon
release and cause injury to yourself or others.
2. Remove the flesh in the area of the wounds.
3. Clean the surrounding area of the wound and
inspect for the presence of carbon fragments.
2. Recheck nock and point – Check points
and nocks to be sure they are securely attached
and undamaged before each shot. Warning:
Shooting damaged nocks or arrows can cause severe
injury to the archer and / or spectators.
4. Dispose of any meat that might contain
carbon splinters.
A S S E M B LY P R E C A U T I O N S
3. Adjust and test your arrow rest –
When setting up your bow, check your rest
settings, specifically prong spacing to insure your
arrows will not fall through. Warning: An arrow
jammed between the rest and the riser, or
between the prongs of the rest could fail upon
release and cause injury to yourself or others.
Warning: Use only Carbon Impact brand components with your Carbon Impact shaft. The
use of components other than Carbon Impact –
even if they look similar – could cause breakage or unseen damage to the shaft and could
result in injury to the archer or spectators.
Warning: Never soak carbon shaft in harsh
chemicals like acetone, paint thinner or MEK.
Nocking the shaft – Firmly press the nock
valley base until the Press Fit Nock is fully
inserted into the shaft – for Rotonocks until the
nock snaps into place. Doesn’t require glue.
Cutting the shaft – Always cut carbon
shafts with nocks in place to ensure correct length.
Only use a high-speed arrow saw with an abrasive
wheel when cutting. Warning: Always use
appropriate respiratory protection (NIOSH
approved dust mask and safety glasses) when
cutting arrow shafts.
Gluing the point/insert – Apply a generous
amount of 24-hour full-cure, flexible epoxy to the
shank of the insert and to the inside of the shaft
wall. Be sure the insert is fully seated and allow
time for glue to fully cure before shooting.
Warning: Do not use quick setting epoxy to
install point insert. The bonding is not strong
enough. Hot melt not recommended.
HOW TO USE THE CHART
1) Select the type of bow you use –
Compound column: A Recurve column: B
4) Your correctly spined shaft is in the box at
the intersection of the row selected in # 3) and the
column selected in #2). If the chart indicates you
are between sizes, select the stiffer of the two sizes.
2) Select your arrow length in row C Correct
arrow length is from nock groove to end of shaft.
a) Front weight different
than standard setting –
If lighter by 20 (40) grains
move your correct peak
draw weight box 1 (2) row
up. If heavier by 20 grains
move 1 row down.
b) Compound bows different
than Hard Cam – For Soft
Cam Bows move your peak
draw weight box 1 row up. –
For Round Wheel Bows
move your peak draw weight
box 2 rows up.
c) Finger Release – move your
correct spined shaft box
1 row down.
d) For information on other
Carbon Impact products
not shown in this chart,
please contact customer
service at 231-929-8152.
COMPOUND
BOWS
This chart was established using a Hard Cam
Compound bow with release aid, a Modern
Recurve bow with finger release and Carbon
Impact shafts with Insert and 110 grain point.
Correct Spine Selection
B
XLT: Hunter + • ST: Stealth • TTN: Titan • HOT: Hot Shaft • FS: Fast Shaft
RECURVE
BOWS
A
Adjustment
to the Chart
C H A R T S TA N D A R D S E T T I N G S
3) Select your draw weight in column A or B
Arrow length from nock groove to end of shaft
C
Release Aid
26"
27"
28"
29"
30"
31"
32"
Finger
Release
47 TO 52
———
———
———
———
FS 4000
XLT 5000
———
———
———
FS 4000
XLT 5000
———
———
———
FS 5000
XLT 5000
ST 5000
———
———
FS 5000
XLT 6000
ST 5000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6500
ST 6000
TTN 55/65
HOT 55/65
FS 6500
42 TO 47
52 TO 57
XLT 5000
———
———
———
FS 4000
XLT 5000
———
———
———
FS 5000
XLT 5000
ST 5000
———
———
FS 5000
XLT 6000
ST 5000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6500
XLT 6500
ST 6000
TTN 65/75
HOT 65/75
FS 6500
47 TO 52
57 TO 62
XLT 5000
———
———
———
FS 5000
XLT 5000
ST 5000
———
———
FS 5000
XLT 6000
ST 5000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6500
XLT 6500
ST 6000
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
FS 6500
52 TO 57
XLT 5000
ST 5000
———
———
FS 5000
XLT 6000
ST 5000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 5000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6500
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6500
XLT 6500
ST 6000
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6000
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
———
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
FS 6500
———
ST 6500
TTN 65/75
HOT 65/75
———
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6000
XLT 6000
ST 6000
TTN 55/65
HOT 55/65
FS 6500
XLT 6500
ST 6000
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
FS 6500
XLT 6500
ST 6500
TTN 65/75
HOT 65/75
———
———
ST 6500
TTN 65/75
HOT 65/75
———
———
ST 6500
TTN 65/75
HOT 65/75
———
62 TO 67
67 TO 73
73 TO 79
57 TO 62
62 TO 67
67 TO 73
15