PROTECT COMFORT WITHOUT COMPROMISE. BULWARK iQ

Transcription

PROTECT
COMFORT WITHOUT
COMPROMISE.
BULWARK iQ SERIES.
TECGEN.
TECASAFE PLUS.
PROTECT
Hard Yakka’s reputation is built on hard work.
We have produced quality workwear for over 80
years. Our products are specifically engineered
to endure the toughest of conditions while
delivering comfort, safety and durability at
all times.
PROTECT is our most serious range of workwear
yet. It’s tough, comfortable and practical – but
where it really delivers is protection against
flash fire and arc flash. We have partnered with
Bulwark iQ Series®, TECGEN™ and Tecasafe® Plus
to provide products which deliver superior
comfort and design innovation without
compromising your safety.
Our PROTECT fabrics meet the toughest safety
standards worldwide, including the Australian
and New Zealand guidelines for flame resistant
garments and the USA’s NFPA 70E and NFPA
2112 guidelines.
Importantly for our Australian conditions,
Hard Yakka PROTECT not only offers you
superior flame resistance, it also helps to
reduce heat stress.
Until now, traditional fire resistant (FR) workwear
has been hot and heavy to wear. Unfortunately,
in warmer climates or while performing labour
intensive work, some tradespeople forgo FR
workwear in favour of cotton based workwear
with no FR qualities at all. In the event of an
arc flash or flash fire incident, cotton fabric
burns and will continue burning. Our PROTECT
workwear not only self-extinguishes flame, but
also helps to reduce heat stress.
Whether you work in mining, energy,
oil and gas or electrical, here’s what
it comes down to: put on Hard Yakka
PROTECT workwear and you’re
buying yourself a few vital seconds
that could end up saving your life.
CONTENTS
Important terminology
4
Guide to our icons
5
FR protection: industry information
6
Product testing & industry standards 7
Bulwark iQ Series
8
TECGEN™14
Tecasafe Plus 18
PROTECT quick reference guide 22
Fitting guide
23
IMPORTANT TERMINOLOGY
Arc Flash
Flame Resistant Workwear
Treated FR Fibres
A type of electrical explosion. An arc flash is not
an electric shock – it is when uncontrolled amounts
of electric current travel through air between two
conductors.
Flame resistant fabrics and garments are intended
to resist ignition, prevent the spread of flames, and
to self-extinguish almost immediately upon removal
of the ignition source. Flame resistant workwear is
abbreviated in this catalogue as 'FR'.
The fibres used in these fabrics, such as cotton, are
not normally considered protective and become
flame resistant because of the treatment added.
Fabrics made from treated synthetic fibres, which
are extruded with a flame resistant chemical in the
fibre forming process, become flame resistant for
the life of the garment because the flame resistant
qualities cannot be removed by wear or laundering.
Arc Thermal Performance Value (ATPV)
The incident energy on a fabric or material that
results in a 50% probability that sufficient heat
transfer through the tested specimen is predicted
to cause the onset of a second degree skin burn
injury. This value is presented in calories per
square centimetre (cal/cm2) and represents the
maximum capability for arc flash protection of a
particular garment. An alternative measure to ATPV
is the Energy Break-Open Threshold (EBT), which is
also measured in cal/cm2.
Cotton Drill Workwear
Clothing designed to do everyday work. There is
a misconception that untreated 100% cotton fabric
is somehow “flame resistant”. This is simply not
true. While heavyweight, untreated 100% cotton
fabrics may be more difficult to ignite, they can
and will ignite and continue to burn if exposed to
an ignition source.
Fire Retardant Workwear
Structural garments targeted to firefighting
industries that are intended to prevent ignition.
4
Flash Fire
A rapidly moving flame front which can be a
combustion explosion.
Hazard Risk Category (HRC) – NFPA 70E
Guidelines
The categories in which ATPV ratings are classified.
Each classification represents a level of protection.
HRC 1: 4 cal/cm2 minimum
Inherent FR Fabric
The Great Debate – Treated Versus Inherent
FR Fabrics:
Industry literature often implies that one fabric is
better than the other, however like most things,
everything has its strengths and weaknesses.
Rather than focusing on how the fabric becomes
flame resistant when we talk about FR and
protection, the following points are most critical:
1.That the development of an FR fabric has been
completed correctly and consistently
Inherently flame resistant fibres are defined
as having flame resistance as an essential
characteristic of the fibre. It is a fabric that does not
support combustion and has innate flame resistant
properties that are permanent and inseparable; the
flame resistant qualities will never wash out.
2.That the flame resistant properties of the fabric
last for the life of the garment
Treated FR Fabric
The flame resistant properties within Hard Yakka
PROTECT fabrics are proven to protect and perform.
A fabric that has flame resistant properties added
by chemical process to suppress fire ignition and
flame spread.
3.That the flame resistant fabric is proven
for performance and protection through
independent laboratory testing and end
user trials
HI-VISIBILITY DAY
HI-VISIBILITY DAY/NIGHT
UPF RATING
A garment that uses high-visibility
materials for outdoor use only. The
high-visibility material must encircle
the upper torso. Complies with
AS/NZS 4602.1:2011 High-Visibility
Safety Garments Class Day.
For use in day, night, dawn, dusk or
in poor weather conditions where
there is illumination from headlights.
Complies with AS/NZS 4602.1:2011
High-Visibility Safety Garments Class
Day/Night.
An Ultraviolet Protection Factor
(UPF) rating for Ultraviolet Radiation
transmitted through a fabric onto the
skin. Look for garments with a UPF
40 or 50+ rating to be assured of
excellent protection.
LIGHTWEIGHT FABRIC
VENTILATED
MOISTURE MANAGEMENT
Fabric is lightweight to keep
you cool and comfortable.
Garments are engineered with
ventilation at key heat stress points
to allow airflow and cool the body
to reduce heat stress.
Fabric is engineered to wick moisture
away from the skin and to the fabric
surface so that you stay dry, cool
and safe.
NFPA 70E: HRC 2
NFPA 2112
Fabric which complies with the USA's
National Fire Protection Association
Guidelines National Electrical Code,
Hazard Risk Category 2 classification.
Fabric which complies with the USA’s
2112 Standard performance criteria.
NFPA 70E: HRC 1
HRC
1
Fabric which complies with the USA's
Guidelines National Electrical Code,
Hazard Risk Category 1 classification.
HRC
2
5
Every day, workers expose themselves to potentially hazardous
environments that cause flash fires and arc flash, leading to
common injuries such as burns, respiratory system damage,
hearing damage and even fatalities.
The demand for flame resistant clothing is growing
rapidly as industries build an understanding of the
hazardous nature of their working environments
and their apparel protection requirements. The
use of flame resistant clothing provides the
necessary protection to reduce the risk of serious,
or even fatal injuries.
Oil & Gas
Hard Yakka PROTECT workwear is specifically
designed to cater for the increasing demands of
multiple industries including electrical and energy,
oil and gas and mining.
Heat stress management is also critical, with most
upstream oil and gas activities concentrated in hot
climates. Flame resistant clothing aims to provide
both FR protection and breathability through fabric
technology and garment design.
Electrical & Energy
In the electrical and energy industries the most
common risk is an arc flash event. Arc flash events
typically occur around energised equipment such
as power boards, power lines and general powered
equipment. Arc flash events can cause serious and
even fatal injuries.
Flame resistant workwear in these industries is
intended to self-extinguish flame that has ignited on
the garment and provide protection against seconddegree burns. Heat stress management is also
important for safety.
6
Oil and gas industry workers can be exposed to
flash fires, arc flash events (if operating energised
equipment) and extreme heat conditions. Wearing
flame resistant clothing that self-extinguishes can
give workers much needed time to escape a flash
fire and dramatically reduce burn injuries.
Mining
Miners can be exposed to both flash fires and
arc flash events. Typical mine site workers at risk
include boilermakers, drillers and electricians. Flame
resistant workwear can protect workers against
second and third degree burns and manage heat
stress in hot/humid conditions.
Flame resistant fabric is driven by standards and specifications and must pass intensive testing
before it can be offered in any marketplace.
Most regions conform to a type of international
standard, with the USA’s NFPA guidelines being
the most common. A basic understanding of how
flame resistance is defined and measured is very
important. Included is an overall listing of common
industry standards both internationally as well
as locally.
NFPA 70E – National Fire Protection
Association, National Electrical Code
The USA's NFPA 70E guidelines require employees
working on or near energised parts and equipment
to wear situationally appropriate FR clothing that
meets the requirements of test method ASTM
F1506. ASTM F1506 provides the minimum
performance specifications for protective clothing
and outlines the required testing methods to
measure the Arc Thermal Protection Value (ATPV).
ENA NENS 09 – National Guidelines for the
Selection, Use & Maintenance of Personal
Protective Equipment for Electrical Hazards
Energy Networks Association is an Australian body
who administer NENS 09 guidelines which set
the minimum standards for the selection, use and
maintenance of personal protective equipment
(PPE) when used to protect employees against
electrical hazards within the electricity
supply industry.
NFPA 2112 – National Fire Protection
Association Standard on Flame Resistant
Garments for Protection of Industrial
Personnel Against Flash Fire
AS/NZS 4824 - Protective Clothing for
Firefighters — Requirements and Test
Methods for Protective Clothing used for
Wildland Firefighting (ISO 15384:2003, MOD)
Originating in the USA, NFPA 2112 is an industry
guide on flame resistant garments for protection of
industrial personnel against flash fire. The standard
provides minimum performance criteria and outlines
17 test methods including: flame resistance, afterflame, char-length, thermal shrinkage resistance and
heat resistance.
This Australia/New Zealand standard has been
reproduced from the International Standard ISO
15384:2003 – Protective clothing for firefighters –
Laboratory test methods and performance
requirements for wildland firefighting clothing.
This standard details minimum performance
requirements for protective clothing designed
for use for extended periods during wildlands fire
fighting and associated activities.
ISO 14116:2008 – Protective Clothing
Protection Against Heat & Flame
ISO is an independent European based organisation
that develops international standards for
participating member countries. ISO standard
14116:2008 outlines performance requirements for
the limited flame spread properties of materials,
material assemblies and protective clothing in
order to reduce the possibility of the clothing
burning. Protective clothing complying with ISO
14116:2008 protects workers against brief contact
with small igniting flames where there is no
significant heat hazard and without presence of
another type of heat.
As this standard is for the purposes of certifying
firefighting garments, we only refer to this standard
for specific test methods – not certification – of our
PROTECT range.
Australian and New Zealand High-Visibility
Standards
Standards for high-visibility clothing dictate
workwear colour and design and ensure workers are
seen in high risk situations. All Hard Yakka PROTECT
Hi-Visibility Workwear is certified to meet AS/NZS
4602.1:2011 for high-visibility safety garments.
7
BULWARK iQ SERIES
Bulwark is the world’s largest FR brand with over 40 years of technical leadership in the industry.
In a market first, we’ve brought the new Bulwark iQ Series workwear to Australasia.
Defining a new level of comfort and protection,
the Bulwark iQ Series features a lightweight, flame
resistant knit fabric that uses a more effective
chemistry to provide superior protection and
reduce the risk of heat stress.
Bulwark iQ Series is a specifically engineered
fibre and yarn with dual elemental protection.
It combines phosphorus, which accelerates char
formation to act as an insulator, with a nitrogen
source that provides cooling to make FR chemistry
on fabric more effective than other traditional
FR fabrics.
The more effective the chemistry on the fabric,
the less mass the fabric has to have. Mass no
longer equals protection.
Microscopic imagery of FR knit:
When combined in the right ratio, these elements
provide superior protection from flame and
arc flash hazards.
Bulwark iQ Series chemistry
uses phosphorus with a
higher ratio of nitrogen.
The more nitrogen, the
more bubbles form on
char surface. More bubbles
equals more protection.
The Bulwark iQ Series also employs comfortably
cool technology and design that translates into FR
workwear that’s more breathable than anything
comparable on the market without compromising
protection. With greater comfort, comes greater
compliance.
Microscopic imagery of
an alternate FR knit, using
traditional ammoniated
phosphorus-based
chemistry.
Bulwark iQ Series fabric complies with:
•
NFPA 2112: Fabric performance criteria
•
NFPA 70E: Electrical safety in the workplace.
HRC 2 with ATPV rating of 8.2 cal/cm2
•
High Visibility: AS/NZS 4602.1:2011
BULWARK iQ SERIES
HARD YAKKA PROTECT WITH BULWARK iQ SERIES
The six comfort properties of intelligent protection
4
DURABILITY
FR protection will never wash out
1
SOFTNESS
Feels good to the touch, feels good on the body
2
MOISTURE MANAGEMENT
Fabric ability to wick moisture off body and allow it
to evaporate
6
COMFORT
PROPERTIES
3
5
6
LIGHTWEIGHT
Lessening weight of the fabric without
compromising protection
BREATHABILITY
The amount of air that can transfer through
a garment
MOBILITY
How much the construction of garment allows
wearer to move within the garment
9
BULWARK iQ SERIES
Y11322 LONG SLEEVE POLO
Y07330 LONG SLEEVE HENLEY
• 150gsm, 69% Cotton, 25% Polyester,
6% Polyoxadiazole
• Full underarm gussets provide increased mobility
with superior protection, allowing the garment to
stay tucked while reaching up
• Concealed chest & sleeve pockets
• Hidden rib knit cuffs keep sleeves in place
• Moisture wicking, highly breathable fabric in knit
construction for movement
• Zip font closure
6% Polyoxadiazole
• Button front closure
SIZES: S-5XL
SIZES: S-5XL
HRC / ATPV: HRC 2 – 8.2 cal/cm2
Dark Blue (DAB)
Charcoal (CHA)
Dark Blue (DAB)
Charcoal (CHA)
HRC
HRC
2
2
Y07331 LONG SLEEVE T-SHIRT
INTELLIGENT PROTECTION
IN A LIGHTWEIGHT KNIT
CONSTRUCTION, BULWARK
iQ SERIES GIVES MAXIMUM
COMFORT WITHOUT
COMPROMISE.
6% Polyoxadiazole
SIZES: S-5XL
Dark Blue (DAB)
Charcoal (CHA)
HRC
2
10
Y02170 CLASSIC FIT DENIM JEAN
6% Polyoxadiazole
• Zip front closure
• 425gsm, 70% Cotton, 30% Modacrylic
• One-piece waistband with button closure
• Five jean style pockets
• Soft pre-wash for comfort and look
• Classic fit is traditional – sits at the natural
waist and has a slimmer leg opening that will
fit over boots
SIZES: S-5XL
SIZES: 30-44
HRC / ATPV: 13.0 EBT
Yellow (YEL)
Orange (ORA)
HRC
BULWARK iQ SERIES
Y11321 LONG SLEEVE HI-VIS POLO
Indigo (IND)
HRC
2
2
Y11323 LONG SLEEVE HI-VIS POLO
WITH FR SEGMENTED TAPE
6% Polyoxadiazole
• Zip front closure
• 3M segmented FR tape
SIZES: S-5XL
Yellow (YEL)
Orange (ORA)
HRC
2
11
BULWARK iQ SERIES
Y11324 WOMENS LONG SLEEVE
HI-VIS POLO
Y11325 WOMENS LONG
SLEEVE POLO
6% Polyoxadiazole
• Full underarm gussets provide increased
mobility with superior protection, allowing
the garment to stay tucked while reaching up
• Moisture wicking, highly breathable fabric in
knit construction for movement
• Single button closure for feminine,
performance wear look
6% Polyoxadiazole
• Moisture wicking, highly breathable fabric in
knit construction for movement
SIZES: S-5XL
SIZES: S-5XL
Yellow (YEL)
Orange (ORA)
Charcoal (CHA)
Dark Blue (DAB)
HRC
HRC
2
2
Y11326 WOMENS LONG SLEEVE HI-VIS
POLO WITH FR SEGMENTED TAPE
Y02171 WOMENS CURVY FIT
DENIM JEAN
6% Polyoxadiazole
• Moisture wicking, highly breathable fabric
in knit construction for movement
• 3M segmented FR tape
• 425gsm, 70% Cotton, 30% Modacrylic
• One-piece waistband with button closure
• Five jean style pockets
• Soft pre-wash for comfort and look
• Curvy fit sits a little below the natural waist.
It has a defined waist with room in the hips
and seat that allow for curves
SIZE: S-5XL
SIZES: 6-22
HRC / ATPV: 13.0 EBT
Yellow (YEL)
Orange (ORA)
HRC
HRC
2
12
Indigo (IND)
2
TECGEN
™
TECGEN™
HARD YAKKA PROTECT WITH TECGEN™ FABRIC
Exclusive to Hard Yakka in Australasia, the TECGEN™ range of inherent FR workwear offers protection
from arc flash and flash fire, while providing exceptional comfort.
The patented TECGEN™ fibres used in the
construction of the workwear are ‘bi-regional’.
It has a heat resistant, high-density outer
carbonaceous shell, which provides protection
from radiant heat while the flexible inner core
is capable of stretching and twisting.
Ultimately, this fibre structure provides protection,
yet remains flexible — an important consideration
for spinning and weaving, wash durability and
overall fabric hand feel. TECGEN™ fibres are
blended with other FR fibres, adding softness
and moisture wicking capabilities.
In a world first, exclusive to Hard Yakka PROTECT,
TECGEN™ fabric has been developed to comply
with Australian and New Zealand High Visibility
standard AS/NZS 4602.1:2011.
TECGEN™ fabric complies with:
• NFPA 2112: Fabric performance criteria
•NFPA 70E: Electrical safety in the workplace.
3D view of TECGEN™ fibre reveals two
distinct, bi-regional characteristics.
1.An outer sheath that is heat resistant
and resists burning
HRC 2 with ATPV rating of 8.6 cal/cm2
•
2. A flexible inner core
High Visibility: AS/NZS 4602.1:2011
TECGEN™ innovative features:
Precision testing laboratories found Hard Yakka
PROTECT with TECGEN™ shirts to be on average
63–68% more breathable and to wick sweat on
average 15% better than FR workwear made from
other standard FR fabrics.
Defining comfort
1
TECGEN™ fabrics are engineered to provide
comfortable FR workwear by balancing the key
elements of weight and protection.
WEIGHT
1
Using a lightweight, woven fabric that provides
breathability and moisture-wicking capabilities,
TECGEN™ workwear is noticeably more comfortable
than other heavier-weight HRC 2 workwear.
6
COMFORT
BREATHABILITY
PROPERTIES
2
PROTECTION
2
4
3
5
6
DURABLE MOISTURE WICKING
3
15
TECGEN™
Y00100 HI-VIS COVERALL WITH
PERFORATED FR REFLECTIVE TAPE
• 217gsm, FR Viscose, Modacrylic, TECGEN™
Carbonised Acrylic, Para-aramid, Nylon
• Multiple pocket options for storage – side pockets,
chest pockets and dual cargo pockets with
reinforcements for durability
• Pleated back for movement
• Gusset sleeve cuff
• Heat resistant trims
• Perforated FR reflective - hoop configuration
Y00101 HI-VIS TWO TONE COVERALL
SIZES: 77R-107R, 87S-132S
SIZES: 77R-107R, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
Safety Orange (SOR)
HRC
HRC
2
2
WITH PERFORATED FR REFLECTIVE TAPE
USING LIGHTWEIGHT
WOVEN FABRIC, TECGEN
COMBINES DURABLE,
MOISTURE WICKING,
BREATHABLE FIBRES
WITH FR PROTECTION
CAPABILITIES.
™
• Perforated FR reflective – hoop configuration
SIZES: 77R-107R, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
HRC
2
16
• Two chest pockets with reinforcements
for durability
Y02755 CARGO PANTS
right back pocket, waist fob pocket and dual
cargo pockets with reinforcements for durability
• Crotch gusset for movement
SIZES: S-5XL
SIZES: 77R-107R, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
TECGEN™
Y04200 HI-VIS TWO TONE LONG
SLEEVE SHIRT
Navy (NAV)
HRC
HRC
2
Y04201 HI-VIS TWO TONE LONG
SLEEVE SHIRT WITH PERFORATED
FR REFLECTIVE TAPE
• Two chest pockets with reinforcements
for durability
• Perforated FR reflective – hoop configuration
2
Y02754 CARGO PANTS WITH
PERFORATED FR REFLECTIVE TAPE
right back pocket, waist fob pocket and dual
cargo pockets with reinforcements for durability
• Crotch gusset for movement
• Perforated FR reflective - hoop configuration
SIZES: S-5XL
SIZES: 77R-107R, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
HRC
Navy (NAV)
HRC
2
2
17
TECASAFE PLUS
Tecasafe Plus delivers electric arc and flash fire protection in two alternate fabric weights.
Tecasafe Plus gives high performance values in
industrial areas where there is a fire hazard and also
provides thermal insulation between the body and
the heat source in arc flash events.
Tecasafe Plus features an FR-Modacrylic, Lyocell
and Aramid fibre blend, a combination which
ensures high protection, softness and breathability.
Tecasafe Plus fabric complies with:
Microscopic imagery of FR fabric
• NFPA 2112: Fabric performance criteria
Traditional aramid fabrics (215 gsm) can be subject
to considerable pilling, and continue to deteriorate.
Tecasafe Plus fabric proves highly durable after
multiple wash cycles and shows outstanding
resistance to pilling. Tecasafe Plus fabric retains its
like-new look and maintains its permanent pressed
appearance better than traditional aramid fabrics.
• N
FPA 70E: Electrical safety in the workplace.
HRC 1 with ATPV rating of 5.7 cal/cm2 and
HRC 2 with ATPV rating of 8 cal/cm2 (see
individual products for further detail)
• High Visibility: AS/NZS 4602.1:2011
A third of the blend contains Lyocell, which absorbs
up to three times its weight in water. This means
that the fabric is comfortable to wear as it is
specially engineered to provide excellent moisture
management properties that keep the wearer cooler
by naturally wicking moisture away from the skin
and dispersing this through the fabric to quickly dry.
Tecasafe Plus
TECASAFE PLUS
HARD YAKKA PROTECT WITH TECASAFE PLUS
Traditional aramid fabric
Hard Yakka PROTECT with Tecasafe Plus Fibre Blend
HIGH STRENGTH
LYOCELL
FR-MODACRYLIC
FR-MODACRYLIC
ARAMID
HIGH STRENGTH LYOCELL
• Soft, resilient, easy to dye
to bright shades
• Very strong fibre
• Cellulosic fibre – similar
characteristics as cotton
or rayon, but stronger
• Key content in making
fabric durable
ARAMID
• Low thermal shrinkage
• Resists high temperatures
• Absorbs three times its
weight in water
19
TECASAFE PLUS
Y00308 COVERALL WITH FR
REFLECTIVE TAPE
• 197gsm, FR-Modacrylic, Lyocell, Aramid
chest pockets, back pocket, cargo pocket and
ruler pocket
• Glove & radio loop
• Adjustable sleeve cuffs and neck collar
• FR reflective tape – hoop configuration
chest pockets and dual cargo pockets
• Double back, underarm and back leg venting with
FR mesh to allow for air flow & heat management
SIZES: 77R-107R, 87S-132S
SIZES: 77R-122R, 74L-94L, 87S-132S
HRC / ATPV: HRC 2 – 9 cal/cm2
Safety Orange (SOR)
Red (RED)
HRC
Yellow/Navy (YNA)
Orange/Navy (ONA)
HRC
1
2
Y00303 HI-VIS TWO TONE SHIRT
COVERALL WITH FR REFLECTIVE TAPE
TECASAFE PLUS FABRIC
TECHNOLOGY PROVIDES
DURABILITY, FR PROTECTION
AND PERFORMANCE WHEN
YOU NEED IT MOST.
chest pockets and dual cargo pockets
• Double back, underarm and back leg venting with
FR mesh to allow for air flow & heat management
SIZES: 77R-112R, 74L-94L, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
HRC
2
20
Y02756 CARGO PANTS
• Two chest pockets with button closure
• Double back and underarm venting with FR
mesh to allow for air flow & heat management
ruler pocket
• Reinforced double lined knee
• Right leg glove loop
• Back leg with vertical venting with FR mesh
SIZES: S-5XL
SIZES: 77R-122R, 74L-94L, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
TECASAFE PLUS
Y04065 HI-VIS TWO TONE SHIRT
Navy (NAV)
HRC
HRC
2
2
Y04066 HI-VIS TWO TONE SHIRT WITH
FR REFLECTIVE TAPE
Y02757 CARGO PANTS WITH
REFLECTIVE FR TAPE
• Two chest pockets with button closure
• Double back and underarm venting with FR
mesh to allow for air flow & heat management
ruler pocket
• Reinforced double lined knee
• Right leg glove loop
• Back leg with vertical venting with FR mesh
• FR reflective tape
SIZES: S-5XL
SIZES: 77R-122R, 74L-94L, 87S-132S
Yellow/Navy (YNA)
Orange/Navy (ONA)
Navy (NAV)
HRC
HRC
2
2
21
PROTECT QUICK REFERENCE GUIDE
Bulwark iQ Series
TECGEN™
Tecasafe Plus
Tecasafe Plus
(Y00308 only)
Heat stress management rating
(3=best, 2=better, 1=good)
3
2-3
2
2-3
Weight – upper body garments
(includes shirts, polos, coveralls)
150gsm
217gsm
238gsm
197gsm
Weight – lower body garments
(includes pants)
425gsm
214gsm
238gsm
NA
Segmented
FR Tape
Perforated
FR Tape
FR Tape
FR Tape
Range Comparison
Fabric blend unique and exclusive
to Hard Yakka Protect in Australasia
Lightweight
Fabric meets NFPA 70e HRC 2
Fabric meets NFPA 2112
Fabric meets AS/NZS 4602.1:2011
for high-visibility safety garments
FR properties do not wash out
Offers both taped and non-taped
garments
Tape options
Zero formaldehyde risk
Use of FR trims such as fasteners,
thread and reflective tape
Embroidery available
22
Bulwark iQ Series
MENS SIZES – KNIT SHIRTS
SIZES
S
M
L
XL
2XL
3XL
4XL
5XL
89-97
97-104
104-114
114-127
127-137
137-149
149-160
160-172
SIZES
30
32
34
36
38
40
42
44
TO FIT WAIST (cm)
TO FIT WAIST (inches)
77
30
82
32
87
34
92
36
97
38
102
40
107
42
112
44
ROUNDED CHEST (cm)
MENS SIZES – PANTS
*Note in-leg length is 34 inches on all sizes
WOMENS SIZES
SIZES
TO FIT CHEST (cm)
TO FIT WAIST (cm)
TO FIT HIP (cm)
S
M
L
XL
2XL
3XL
4XL
5XL
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
81-91
71-74
95-98
91-94
74-76
98-100
94-97
76-79
100-103
97-100
79-83
103-107
100-104
83-86
107-111
104-108
86-90
111-114
108-113
90-95
114-119
113-118
95-100
119-125
118-123
100-105
125-130
123-128
105-111
130-135
128-133
111-116
135-140
133-138
116-121
140-145
138-144
121-126
145-150
144-149
126-131
150-155
149-154
131-136
155-160
154-159
136-141
160-165
67R
72R
77R
82R
87R
92R
97R
102R
107R
112R
117R
122R
127R
132R
67
26
70
77
72
28
73
82
77
30
76
87
82
32
79
92
87
34
81
97
92
36
84
102
97
38
85
107
102
40
86
112
107
42
87
117
112
44
88
122
117
46
88
127
122
48
88
132
127
50
88
137
132
52
89
142
87S
92S
97S
102S
107S
112S
117S
122S
127S
132S
87
34
71
92
92
36
74
97
97
38
76
102
102
40
79
107
107
42
81
112
112
44
82
117
117
46
83
122
122
48
85
127
127
50
86
132
132
52
86
137
TECGEN™ & Tecasafe Plus
MENS SIZES – PANTS/COVERALLS
SIZES REGULAR
TO FIT WAIST (cm)
IN-LEG GARMENT MEASUREMENTS (cm)
TO FIT CHEST (cm) – COVERALLS
SIZES STOUT
TO FIT WAIST (cm)
SIZES LONG
TO FIT WAIST (cm)
74L
79L
84L
89L
94L
99L
104L
74
29
82
87
79
31
82
92
84
33
85
97
89
35
87
102
94
37
89
107
99
39
89
112
104
41
89
117
S
M
L
XL
2XL
3XL
4XL
5XL
36-37
14
38-39
15
41-42
16
43-44
17
45-46
18
47-48
18.5
49-50
19
51-52
20
MENS SIZES – SHIRTS
SIZES
TO FIT NECK (cm)
TO FIT NECK (inches)
23
WORKWEAR GROUP
Level 1, 187 Todd Rd
Port Melbourne VIC 3207
Australia
TELEPHONE
Customer Service 1800 644 517
ABN 82 004 055 387
©2015 Hard Yakka
YAK0387
hardyakka.com.au/protect

PROTECT COMFORT WITHOUT COMPROMISE. BULWARK iQ

Transcription

Similar documents

mariners supply pigeon forge

LU004 Hockney Corner Sofa - sofa comes in two parts to form an L

DECORATIVE FABRIC SALE Boca Bargoons has 1000`s and 1000`s

A golden opportunity to A golden opportunity to

treadmill - TRUE Fitness Equipment

“Poke Berry Basket” Supply List

Dublin_T2 - Fabric Architecture

Ad, 8.625x11.125, Laverson, RanchandCoast

Vivantes Komfortklinik am Humboldt-klinikum, Berlin, Deutschland

Pietenpol Sky Scout - Model "A" Ford Foundation