FLASHER - Higdon Decoys

FLOATING / SPLASHING
FLASHER
instructions
A
B
INCLUDED PARTS:
[A] Splashing Flasher Body
[B] Large Wings
[C] Wing Weights
[D] ON / OFF Toggle Switch
[E] Floating Base
[F] #4 Timer (Internal)
[G] Bilge Pump* (Splashing Flasher Only)
[H] Anti-Flip Counter Weight
[I] 12v Battery (Internal)
[J] 12v Battery Charger with
Port Adapter (Not Shown)
C
D
E
H
G
INSTRUCTIONS FOR USE:
K
1. Connect electrical leads, blue & green, from decoy body to floating base
by pressing firmly together.
2. Connect battery leads, black from body/red from timer, to battery posts.
(Fig. K)
L
3. Firmly press decoy body into floating base, ensuring locking guides are
properly aligned. Twist clockwise to lock. When assembled properly,
feet should be lined up in relation to body. (Fig. L)
4. Attach wings (printed side up) by lifting the spring loaded wing stud and
insert the wing shaft into the socket, ensuring wing is secure. (Fig. M)
5. Turn ON/OFF toggle switch to “ON” position to operate spinning wings
and bilge pump*. (Fig. N) *(Splashing Flasher Only)
M
6. Minimum of 8oz weight for decoy anchor is recommended at
applicable depth.
QUESTIONS? CALL!
Find us online!
270-443-8729
N
w w w. h i g d o n o u td o o r s . c o m
HIGDON_flasher_instructions.indd 1
5/18/16 5:26 PM
Splashing Flasher Shown
QUESTIONS? CALL!
270-443-8729
O
FLASHER
ANTI-FLIP COUNTERWEIGHT:
On windy or choppy days, add stability to decoy by attaching an anti-flip
counterweight as provided. First ensure proper water depth. Simply screw
counterweight onto bottom of battery box. (Fig. O)
Metal Flanges
P
CONTROL WATER SPLASHING*: (Splashing Flasher Only)
The metal flanges located by the feet (Fig. P) are designed to be adjusted
up or down to control splash amounts. On sunny, warmer or calm days, bend
flanges slightly up for more visibility. On days that are overcast, choppy, windy
or below freezing, bend flanges slightly down for less splashing on wings.
This could reduce freezing and help increase battery life.
TIPS:
1. The wing weights are designed to self-right the wings when not in use. If using decoy continuously,
remove wing weights to increase battery life.
2. Recharging the battery: Overnight charging (around 7 hours) after each hunt is recommended to keep the
battery in good condition. Charge by inserting port adapter into decoy body or by removing battery and
connecting charger directly to battery terminals using clip lead adapter.
3. Storing the battery: charge fully and keep at room temperature during the off season. We recommend
fully charging every three months. Never store battery for any period of time with no charge. Battery can
last at full capacity for four years if maintained this way.
5. For decoy bags, optional remote/receiver, 12v batteries, chargers, timers, wings, anti-flip counterweight,
and any other parts contact your local dealer or visit our website at www.higdonoutdoors.com.
BILGE PUMP CLEANING*: (Splashing Flasher Only)
1. The bilge pump and pipe can easily be taken off the decoy for
cleaning in case of debris clogging up the bilge pump.
2. To clean, simply unsnap the bilge from the bottom of
the decoy.
3. Clean out grass and debris.
4. Once the bilge is running properly, snap bilge pump back on.
HIGDON_flasher_instructions.indd 2
FOR CATALOGS & PRODUCT INFO, VISIT OUR WEBSITE
5/18/16 5:26 PM