BYRD TOOL - Ballew Saw and Tool

Transcription

436 SHAPER CUTTERS
DISTRIBUTED THROUGH BALLEW SAW & TOOL, INC.
BYRD TOOL
Heads - Journal Heads
Shaper Heads - Moulder Heads
Woodworkers know that a shear cut is far better than a straight cut and that a stagger cut is much better than just a single straight knife and is a lot easier on your
dust collection system. If you plane a nail or staple, it is not necessary to replace
expensive knives the full length of your planer head. Replace 2 or 3 small knives
and you are ready to go. You might expect to pay a small fortune for a journal
head with such features, but these products can be manufactured to your specifications for a fraction of the cost you might expect.
Spiralled Stagger Tooth to break up chips for dust collection systems
and to reduce horsepower requirements.
Shear to give clean cutting action. Helix to assist the chip flow.
Replacement Tips (sold in /Boxes of 10)
SHELIX REPLACEMENT TIPS (BOXES OF 10)
10-290 (1-29 Boxes)
300-990 (30-99 Boxes)
1000 or more
PRICE
$31.50/box
$28.80/box
$25.20/box
Benefits to True Helical Cuts:
• Thicker Knives than most 2.5mm
• More overlap row to row
• Chip clearance between knives
• Radius ground on knives
• Extremely quiet cuts
• Greatly reduces tearout
• Replace only damaged or dull knives
Ours
Theirs
True Helical
Jointers
Straight Cut
(Carbide Tips Included)
ITEM
Generic 6"
Generic 8"
Generic 12"
Powermatic P50 6"
Powermatic P54 6"
Powermatic P60 8"
Oliver Model 4240 10"
Invicta D120 8"
Invicta D132 12"
Invicta D142 16"
www.ballewsaw.com
PRICE
$323.10
$422.10
$828.00
$323.10
$323.10
$422.10
$670.50
$828.00
$1,129.50
$422.10
$1,1030.50
$1,413.00
ITEM
S.A.C. FS/305 12"
S.A.C. FS/430 16"
S.A.C. FS/530 20"
SCMI 410 16"
Delta DJ20 8"
Knapp AD 410 Profi T 16"
Northfield HD 12"
SICAR Model 310 12"
Grizzly G-1018 8"
Jet JJ8CS 8"
Griggio PF-330 12"
Bridgewood BW - 8J 8”
PRICE
$1,301.40
$1,413.10
$1,597.50
$1,413.00
$422.10
$1,318.50
$1,224.00
$1,030.50
$422.10
$404.10
$1,030.50
$422.10
Planers (Carbide Tips Included)
ITEM
Generic 15" 4-post
Generic 20" 4-post
Pinhero 25"
CASADEI 20"
BUSS 24"
BUSS Model 44 30"
Northfield #7 24"
Northfield #240 24" dbl
Robland 12"
Woodmaster 812 18"
Invicta DG140 16"
Invicta DG152 20"
Invicta DG163 24"
Powermatic P100 12"
Powermatic Mod 15 15"
Powermatic P160 16"
Powermatic P180 18"
Powermatic Mod 208 & 209 20"
Powermatic P221 20"
Powermatic M201 22"
Powermatic P225 24"
New Powermatic 24"
Powermatic Mod 12 12" p/m
Yorkcraft YC-15P 15"
SECO SK-824WP 24"
Bridgewood GY-610H 24" 2-sd
Bridgewood BW-15P 15" 4-post
Bridgewood BW-216PS 16" 2-s
Bridgewood BW-120P 20"
Bridgewood BW-508 20"
Bridgewood BW-225PS 24" 2-s
Bridgewood BW-240 24"
Bridgewood BW-8J 8"
Bridgewood BW-126PH 26"
Oliver Model 299d 25"
Oliver 18" Double
SCMI S520 20"
SCMI S630 24"
Delta DC380 15"
Delta 22-200/22-201 18" wbp
Delta 22-660 13"
Delta DC580 20"
S.A.C 530 20"
S.A.C 630 25"
DeWalt DW - 735 13”
[email protected]
PRICE
$751.50
$1,129.50
$3,586.50
$2,736.00
$3,870.70
$5,476.50
$3,775.50
$3,303.00
$940.50
$1,602.00
$2,412.00
$2,736.00
$3,303.00
$846.00
$751.50
$1,318.50
$1,507.50
$1,129.50
$1,665.00
$1,507.50
$3,303.00
$3,415.50
$895.50
$751.50
$2,074.50
$2,488.50
$751.50
$1,732.50
$1,224.00
$1,224.00
$1,224.00
$1,507.50
$2,488.50
$1,507.50
$1,507.50
$404.10
$2,677.50
$1,507.50
$1,696.50
$3,492.00
$3492..00
$2,736.00
$3,303.00
$751.50
$1,791.00
$846.00
$1,318.50
$2,736.00
$3,303.00
$423.00
10-32 TORX+ Screws for
“Shelix” start @ $0.85 each
Fax: 1 (417) 865-3797
CALL TOLL FREE TO ORDER 1 (800) 288-7483
437
BYRD TOOL
INSERT TOOLING
Standard Molder and Shaper Series
PART#
48600806-29
48601606-29
48602406-29
48603206-29
48604006-29
49600806-29
49601606-29
49602406-29
49603206-29
49604006-29
49600806-34
49601606-34
49602406-34
49603206-34
49604006-34
50600806-34
50601606-34
50602406-34
50603206-34
50604006-34
DIA.
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
LENGTH
2
4
6
8
10
2
4
6
8
10
2
4
6
8
10
2
4
6
8
10
BORE
1-13/16 STRAIGHT 1-13/16 STRAIGHT 1-13/16 STRAIGHT 1-13/16 STRAIGHT 1-13/16 STRAIGHT 1-13/16 HYD.
1-13/16 HYD.
1-13/16 HYD.
1-13/16 HYD.
1-13/16 HYD.
2-1/8 HYD.
2-1/8 HYD.
2-1/8 HYD.
2-1/8 HYD.
2-1/8 HYD.
2-1/8 CONED.
2-1/8 CONED.
2-1/8 CONED.
2-1/8 CONED.
2-1/8 CONED.
PRICE
$360.90
$504.00
$646.20
$789.30
$922.50
$541.80
$751.50
$966.60
$1173.60
$1378.80
$541.80
$751.50
$1074.00
$1173.60
$1378.80
$423.90
$814.50
$126.00
$1014.30
$1198.80
When replacing or rotating inserts, the seat should be as clean
as possible. This will prevent breakage of inserts and ensure
proper insert alignment. To properly align the insert, press the
insert away from the seat while tightening to approximately 55
inch pounds torque. This allows tthe countersink to slide up
the tip into its proper position.
We have two types of torque wrenches available:
$85.50
Standard Break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85.50
Screwdriver type (torque limiter calibrated and set). . . . .$166.50
$166.50
Small Molder and Shaper Series
PART#
DIAMETER
48300402-5
3
48300802-3
3
48300802-4
3
48300802-5
3
48301202-3
3
48301202-4
3
48301202-5
3
48301602-3
3
48301602-4
3
48301602-5
3
48350403-5
3-1/2
48400803-5
4
48401603-5
4
48402403-5
4
48430803-5
4-3/8
48431603-5
4-3/8
48432403-5
4-3/8
LENGTH
1
2
2
2
3
3
3
4
4
4
1
2
4
6
2
4
6
BORE
1-1/4
3/4
1
1-1/4
3/4
1
1-1/4
3/4
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3” OD BBRC For Above @ $56.00 Over 3” OD @ $68.00
Shim @ $7.25
PRICE
$103.50
$132.30
$132.30
$132.30
$189.00
$189.00
$189.00
$245.70
$245.70
$245.70
$103.50
$132.30
$245.00
$378.00
$132.30
$245.70
$378.00
Mid Size Molder Series
PART#
48480804-24
48481604-24
48482004-24
48482804-24
48483604-24
48480904-25M
48481604-25M
48482004-25M
48482404-25M
48482804-25M
48423604-25M
48551603-29
48553603-29
DIA.
4-13/16
4-13/16
4-13/16
4-13/16
4-13/16
122mm
122mm
122mm
122mm
122mm
122mm
140mm
140mm
Ballew Saw & Tool, Inc.
LENGTH
2
4
5
7
9
60mm
100mm
130mm
150mm
180mm
230mm
4
9
BORE
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
40mm
40mm
40mm
40mm
40mm
40mm
1-13/16
1-13/16
PRICE
$178.20
$301.50
$367.20
$490.50
$612.90
$207.60
$301.50
$367.20
$414.90
$490.50
$612.90
$361.80
$738.00
325 South Kimbrough Ave. | Springfield, MO | 65806
1 (800) 288-7483
438 SHAPER CUTTERS
BYRD TOOL
INSERT TOOLING
3 Wing Stile and Rail Cutters
Includes tips
Tips shown are full size.
Groove is
1/2" Deep X 1/4" Wide tips are
30MM Wide X 30MM Tall
Available In:
3/4” Bore - 4” Dia.
R.H. or L.H.
= 1-1/4” Bore - 4-1/2”
Dia. R.H. or L.H.
(Bushings Available)
=
LH IS CCW-MFD
SPECIAL NOTE: All Profiles in the section above are interchangeable in same head.
3 Wing Stile and Rail Cutters (continued)
Includes tips
Tips for Stain Relief (eased edge in
stock) and some other patterns that are
close to the same shape can be
made to fit these bodies
Please send your pattern to confirm
whether a fit can be made and allow
us to quote on the tools.
Cutters @ 278.10 each with Tips
Extra Tips @ 72.90 Per Set of 3
Replacement Gibs @ 10.58 each
The 4” diameter cutters are made to be
used with 3” Diameter Ball Bearing
Rub Collars. The 4-1/2” diameter
cutters require a 3-1/2” Rub Collar.
Rub Collars also in stock @ 43.20 each.
www.ballewsaw.com
[email protected]
RH IS CCW-MFU
Fax: 1 (417) 865-3797
439
BYRD TOOL
INSERT TOOLING
3 Wing Stile and Rail Cutters
The Tips shown are interchangeable with Tips that
have sharp corners.
((ccoonnttiinnuueedd))
These Tips have a small radius where required to
allow for Stain Relief and are Designated as Eased
Edges
In Stock at
Byrd Tool For
immediate
Shipment
LH IS CCW-MFD
The Tips shown are interchangeable with Tips
that have sharp corners.
NOTE: When changing these tips, make sure
the seat is clean and free from burrs.
In Stock at
Byrd Tool For
immediate
Shipment
RH IS CCW-MFU
1 (800) 288-7483
440 SHAPER CUTTERS
Distributed through Ballew Saw & Tool, Inc.
BYRD TOOL
INSERT TOOLING
3 Wing Stile and Rail Cutters (continued )
Glass Door Tool Bodies Required
The Tips shown are NOT interchangeable with the Tips
used with Cope and Pattern heads.
NOTE: The tip and gib must be held securely against the
seat and stop screw when tightening the gib screw
In Stock at
Byrd Tool For
immediate
Shipment
LH IS CCW-MFD
The Tips shown are NOT interchangeable with the Tips used
with Cope and Pattern heads.
NOTE: The tip and gib must be
held securely against the seat
and stop screw when tightening
the gib screw
In Stock at
Byrd Tool For
immediate
Shipment
www.ballewsaw.com
[email protected]
RH IS CCW-MFU
Fax: 1 (417) 865-3797
BYRD TOOL
441
INSERT TOOLING
The Tips shown are interchangeable with Tips used
in Glass Door Tool Bodies.
These Tips have a small radius where required to
allow for Stain Relief or Designated as Eased Edges
In Stock at
Byrd Tool For
immediate
Shipment
LH IS CCW-MFD
The Tips shown are interchangeable with Tips
used in Glass Door Tool Bodies.
These Tips have a small radius where required
to allow for Stain Relief or Designated as Eased
Edges
In Stock at
Byrd Tool For
immediate
Shipment
RH IS CCW-MFU
1 (800) 288-7483
442 SHAPER CUTTERS
BYRD TOOL
INSERT TOOLING - Shaker Style
3 Wing Stile and Rail Cutters (continued )
Shaker Style Tool Bodies Required
Regular
The patterns shown are centered so that all three rail patterns are
interchangeable in the same rail body and all three stile patterns
are interchangeable in the same stile body
In Stock at Byrd
Tool For
immediate
Shipment
Available In:
= 3/4” Bore - 4” Diameter
= 1-1/4” Bore - 4-1/2” Diameter
12 Degree Angle
Interchangeable Stile Tips are:
6LS and 7LS
or
6RS and 7RS
Interchangeable Rail Tips are:
6LS and 7LS
or
6RS and 7RS
In Stock at
Byrd Tool For
immediate
Shipment
Available In:
3/4” Bore - 4” Diameter
= 1-1/4” Bore - 4-1/2” Diameter
=
www.ballewsaw.com
12 Degree Angle
[email protected]
Fax: 1 (417) 865-3797
443
BYRD TOOL
INSERT TOOLING
The Tips shown are interchangeable with Tips used in Shaker Style Bodies.
These Tips are centered so that rail patterns are interchangeable in the same rail
body and patterns are interchangeable in the same stile body.
In Stock at Byrd
Tool For
immediate
Shipment
5RE / 5SE
In Stock at Byrd Tool
For
immediate
Shipment
SPECIAL NOTE:
All Profiles in the section at right are interchangeable in same head.
Replacements:
=
=
=
=
Gib Screws @ 0.45 each
Stop Screws @ 2.66 each
T-Handle Wrench @ 3.96 each
Tool Bushings @ 8.96 each
LH IS CCW-MFD
In Stock at Byrd Tool
For
immediate
Shipment
RH IS CCW-MFU
1 (800) 288-7483
444 SHAPER CUTTERS
BYRD TOOL
INSERT TOOLING - Door Edge Cutters
Door Edge Cutters
RH IS CCW-MFU
All profiles on this page marked
RH can be used in the same head
All Tips are interchangeable in
the same Hand 3 Wing Body
Tips shown are Full Size
Tips are 30mm Wide
3” Minor Dia. 3/4” Bore
3-1/2” Minor Dia. 1-1/4” Bore
Cutters @ 278.10 Each with Tips
5” Minor Dia. 1-1/4” Bore
Replacement Gibs @ 10.58 Each
LH IS CW-MFU
In Stock at
Byrd Tool For
immediate
Shipment
All profiles on this page marked
RH can be used in the same head
INSERT TOOLING - Flooring Cutters
LH IS CW-MFU
RH IS CCW-MFU
Drawings are shown at Full
Scale Cuts made with G-25
and T-25-V Cutting Tips
Cuts made with G-25 and
T-25-V Cutting Tips.
1/4” - 1/8” or 1/16” Reveal.
(Shown is 1/8” reveal)
4-7/8” Dia. X 3 Wing
1-1/4” - 40MM or 1-1/2” Dia. Bore
www.ballewsaw.com
6” Dia. X 3 Wing X 30mm X 1-13/16” Bore
Corrugated Back Plug Cutter Bodies @ 34.20 Each.
Inserts @ 8.10 Each
[email protected]
Examples of Back Relief Cuts
Corrugated Back Plug Cutter
Tips shown are the most common Patterns used
Fax: 1 (417) 865-3797
BYRD TOOL
In Stock at Byrd Tool For
immediate
Shipment
445
Raised Panel Cutters
In Stock for Immediate Shipment for Patterns shown Also with
Back Cutter, Trim Cutter, Bearing Rub Collar or Spacer All
Cutters 1-1/4” Bore 3 Wing All Tips Shown Face
Coming - Full Size
SPECIAL NOTE: All Profiles in the
section below are interchangeable in
same head.
LH
IS C
CW
-MF
U
RH
IS C
CW
-MF
D
SPECIAL NOTE:
All Profiles in the section above
are interchangeable in same head.
6” Diameter Raised Panel Cutters @ 301.50
each with Tips Extra Tips @ 83.70 per set of 3.
Relacement Gibs @ 14.40 each.
4-1/2” Diameter Back Cutters @ 165.60 each with tips.
Extra tips @ 29.70 per set of 3.
3” Diameter Trim Cutter @ 140.40 each with Tips. Extra
Tips @13.50 per set 3. Replacement Gibs @ 7.20 each.
Up to 3” Ball Bearing Rub Collar @ 43.20 each.
Spacer @ 19.80 each.
1 (800) 288-7483

BYRD TOOL - Ballew Saw and Tool

Transcription

Similar documents

whiteside machine - Ballew Saw and Tool

311-euRoPe

Byrd - Weaver Sales

knives and steel - Ballew Saw and Tool

onsrud - Ballew Saw and Tool

freud - Ballew Saw and Tool

wl fuller, inc. - Ballew Saw and Tool