311-euRoPe

Q u a l i t y
i n
c o a x i a l
c a b l e s
311-EUROPE
Authenticated
Packing
PRELIMINARIES
COMPANY PROFILE
Italiana Conduttori Srl has been producing CAVEL coaxial cables since 1968.
During this time the company has achieved continuous growth and major
recognition in both the Italian and international markets. The company plant
and offices, occupying a surface area of 15,000 sqm, are situated in Gropello
Cairoli, in the Province of Pavia, some 30 km along the A7 motorway from Milan
en route to Genoa. Each year the company produces over 100,000 km of cable.
CAVEL ON THE WEB
The contents of this presentation are presented and illustrated in more
detail in the English version of our website, which you can visit at the
following addresses:
www.cavel.com
www.cavel.it
PRODUCTS PROFILE
The costs of designing and building TV distribution networks necessitate
products with better performance integrity and longer life.
CAVEL an EU PRODUCT MADE IN ITALY
To meet these expectations, CAVEL coaxial cables have been designed to
comply with new technological demands. More effective screening techniques
have been developed and dimensions reduced, while at the same time
enhancing mechanical strength and increasing durability. This has been made
possible due to the use of nitrogen gas injected physical foam insulation
technology, used for the production of coaxial cable dielectrics. Our service
to installers has been improved by the introduction of CABLEBOX dispensers,
offering environmental and health and safety benefits, as well as a wide range
of connectors and tools.
QUALITY IN COAXIAL CABLES
Italiana Conduttori has been producing CAVEL coaxial cables for over 40
years. The safety and reliability of CAVEL products are guaranteed by: the
careful selection of suppliers with proven integrity in the supply of quality raw
materials; the use of the best scientific equipment for analysis, development,
testing and control at all stages of production; the attainment of Quality
Accreditation UNI EN ISO 9002, on April 30th 1996, issued by the CSQ Italian
national certification body (Certificate No.9125.ICON) and the international
certification network IQNet.
This certification has since been updated to UNI EN ISO 9001:2008,, obtained
on 18.11.2010.
All coaxial cables produced conform to major international specifications such
as: EN, IEC, CEI, UTE, BS, DIN and MIL.
CERTIFIED COMPANY
UNI EN ISO 9001-2008
CERT. NR. 9125 - ICON
A COMPANY THAT RESPECTS NATURE
CAVEL is compliant with the EU RoHS Directive banning the use of certain
hazardous chemical substances. In the past we used lead primarily in PVC
sheath compounds as a thermal stabiliser. In accordance with the RoHS
Directive, we discontinued the use of lead and its derivatives in all products
from March 2005.
In addition, Regulation 1907/2006 covering the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH) came into force on 1 June
2007. Pursuant to the REACH Regulation, our company is categorised as a
downstream “user of substances” and as a “producer of articles”. This means
that we are not required to register or pre-register the products we use during
the production process.
For further information please visit our website and download our Declaration
of Conformity to the RoHS Directive, as well as our Declaration in accordance
with the REACH Regulation.
CAVEL WARRANTY
In recent decades, the updating of our coaxial cable design, the improved quality
of our raw materials and the acquisition of modern production equipment have
allowed us to guarantee all coaxial cables produced under the CAVEL brand
for a period of 15 years. Both the Certificate and Conditions of Warranty can be
downloaded from our website.
2
COAXIAL CABLE
INDEX
Class A++
Broadband Coaxials
SA > 105 dB
.................................
Pag. 4-5
SMATV
Multicore Coaxials
Video Security
Coaxial Cables
.................................
Pag. 12-13
.................................
Pag. 20-21
Class A/A+
Digital Drop Coaxials
SA > 85/95 dB
.................................
Pag. 6-7
Distribution Coaxials:
Undernground and
Outdoor Installation
Cablebox
Environment-Friendly
Standard Packing
.................................
Pag. 22-25
Standard
Drop Coaxials
SA > 75 dB
.................................
Pag. 8-9
Radio Frequency
Coaxials
MIL-C-17 Specs.
.................................
Pag. 18
Tools and
Connectors
Security
Drop Coaxials
LSZH Sheath
.................................
Pag. 10-11
Hybrid Coaxials
for Multimedial
Applications
.................................
Pag. 19
Cross Ref. Charts
US versus
CAVEL cables
Legend
.................................
Pag. 30-31
.................................
Pag. 14-17
.................................
Pag. 26-29
SINCE 1 9 6 8
3
CLASS A++ COAXIALS
FOR TRIPLE PLAY DIGITAL
NETWORKS
Class A++ Broadband Coaxials SA > 105 dB
TS61L
RP913B
TS703J
TS11J
TS22/99J
TS27/115J
dia. mm
material
1,00
Cu
1,13
Cu
1,13
Cu
1,63
Cu
2,20
Cu
2,70
Cu
material
dia. mm
PEG
4,75
PEG
4,80
PEG
4,80
PEG
7,20
PEG
9,90
PEG
11,50
material
APAS
APA
APAS
APAS
APAS
APAS
3. Overlapped Film Foil
material
%
dia. mm
material
CuSn
45
5,32
AP
CuSn
71
5,35
-
CuSn
45
5,37
-
CuSn
63
7,85
-
CuSn
64
10,72
-
CuSn
64
12,32
-
Shorting Fold Film Foil (J)
material
-
-
APJ
APJ
APJ
APJ
dia. mm
material
6,60
PVC
6,60
PVC
6,90
PVC
10,30
PE
13,10
PE
15,30
PE
kg/km
kg/km
12,6
39,4
19,1
44,4
14,6
44,0
34,9
86,8
61
133
83,3
180,2
mm
N
35/70
120
35/70
150
35/70
150
100
300
150
600
200
800
Ohm
pF/m
%
75±3
54±2
82
75±3
52±2
85
75±3
52±2
85
75±2
52±2
85
75±2
52±2
85
75±2
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
2,0
2,3
3,5
4,6
8,6
10,8
13,6
18,8
20,4
27,8
31,1
32,4
37,3
1,4
1,9
3,0
4,0
8,1
9,9
12,6
17,3
18,7
25,7
28,8
30,6
34,1
1,6
2,3
3,2
4,1
8,0
9,8
12,5
17,2
18,6
25,2
28,1
29,7
33,7
1,1
1,5
2,2
2,8
5,6
6,9
8,8
11,9
12,8
17,9
19,8
21,0
24,5
0,8
1,1
1,5
2,0
4,0
4,9
6,4
9,1
9,8
13,8
15,5
16,5
18,9
0,8
1,0
1,3
1,7
3,5
4,3
5,5
7,7
8,4
11,5
12,8
13,6
15,4
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
A++
< 0,9
> 105
> 95
> 85
22,5 / 14
36,5
3
6
2-4
> 30
> 28
> 26
> 22
A++
< 0,9
> 112
> 104
> 91
18 / 10,7
28,7
3
8
2-4
> 30
> 28
> 26
> 22
A++
< 0,9
> 105
> 90
> 80
18 / 14
32
3
8
2-4
> 30
> 28
> 23
> 20
A++
< 0,9
> 105
> 90
> 80
8,5 / 7,5
16
8
16
2-3
> 30
> 28
> 23
> 20
A++
< 0,9
> 115
> 100
> 85
5 / 4,5
9,5
8
21
2-3
> 25
> 24
> 23
> 22
A++
< 0,9
> 115
> 110
> 100
3,4 / 3,5
6,9
8
25
2-3
mode
m
m
mod.
item
coil
100
600
S100M
DS100
coil
100
600
S100M
DS100
reel
100
500
R100M
DS100
drum
500
500
PD500
-
drum
500
500
WD500
-
drum
500
500
WD500
-
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner/outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern (look at page 25)
Fits CABLEBOX
The market demand for products
offering high screening performance
for use in digital broadband
communication systems is growing
day by day. This is due on the one
hand to the increasing number of
transmission systems and, on the
other hand, to the demand for digital
TV programming such as PPV and
VOD. Furthermore many operators
now offer digital services for internet
and digital telephony. Altogether
these comprise the so-called Triple
Play digital network.
This applies to distribution and
reception systems in different fields,
including terrestrial, satellite and
cable broadband TV networks.
All such systems require coaxial
cables with more efficient screening
features, especially in the so-called
Return Path frequency range,
typically 5 - 85 MHz.
The TS Series includes coaxials
provided with the special J-ShortingFold Screen. This is an innovative
Triple Shielded screen that affords
excellent screening attenuation (SA)
along the full frequency bandwidth
range 30-3000 MHz. It consists of:
1. An Al/Pet/Al foil film bonded to the
dielectric (APAS);
2.One conventional braid of CuSn wires;
3. Another Al/Pet foil film (AP) over
the braid, which is folded back over
itself on the overlapping section.
The combination of these screening
components guarantees the stability
of the SA values, which are close to
those provided by a real metal tube
while keeping the cable’s flexibility
within acceptable limits for easy
handling during installation.
Pet film
Alu foil
We have introduced two series of
cables which both offer the highest
screening efficiency, Class A++,
according to EN50117 specifications.
The RP Series includes Double
Shielded coaxials performing the
highest possible screening efficiency
along Return Path frequencies. This
is due to the use of a thicker Al foil
film over the dielectric.
Class A++
Broadband Coaxials
SA > 105 dB
TS27/115J
RP913B
TS61L
J- Shorting Fold Screen
Alu foil
Pet film
braid of tinned wires
Alu foil
Pet film
bonded Alu foil
physical foam PE
PE skin
gas injected
foam PE
copper inner
conductor
Tools & Connectors (look at pages 26-29)
4
COAXIAL CABLE
SINCE 1 9 6 8
5
SA > 85 dB
Class A/A+ Digital Drop Coaxials
CW41S
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
DG70
DG70C
DG80
DG80C
SA > 95 dB
DG125
QF100BL
RP61B
DG113
DG113C
DG163
SAT752F
dia. mm
material
material
dia. mm
0,41
FeCu
PEG
1,90
0,70
Cu
PEG
2,90
0,80
Cu
PEG
3,50
1,25
Cu
PEG
5,30
1,00
Cu
PEG
4,75
1,00
Cu
PEG
4,75
1,13
Cu
PEG
4,80
1,63
Cu
PEG
7,20
1,13
Cu
PEG
4,80
material
APAS
APA
APA
APA
Cu/Pet
APS
APA
APAS
Cu/Pet
material
%
dia. mm
CuSn
70
2,47
CuSn
73
3,40
CuSn
65
4,00
CuSn
64
5,88
Cu
53
5,33
CuSn
53
5,37
CuSn
72
5,30
CuSn
78
7,85
Cu
72
5,30
dia. mm
material
colour
3,60
PVC
4,30
PVC
5,00
PVC
7,30
PE
6,65
PVC
6,60
PVC
6,60
PVC
10,10
PE
6,60
PVC
kg/km
kg/km
4,3
14,9
10,2
20,9
11,1
25,9
22,9
46,5
19,4
45
14,1
41,1
19,2
43
40,5
86,3
23,4
44,7
mm
N
15/30
120
20/40
80
25/50
90
70
250
35/70
150
35/70
150
35/70
150
100
300
35/70
150
Ohm
pF/m
%
75±3
55±3
82
75±3
52±2
85
75±3
52±2
85
75±3
52±2
85
75±3
54±2
82
75±3
54±2
82
75±3
52±2
85
75±2
52±2
85
75±3
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
3,8
5,4
8,6
10,6
21,2
26,2
33,0
45,1
48,7
65,4
73,0
77,4
87,4
2,5
3,5
5,2
6,7
13,0
15,9
20,2
27,8
29,9
40,3
45,0
47,9
53,7
2,1
3,0
4,4
5,7
11,0
13,5
16,8
23,0
24,9
33,5
37,4
39,6
44,8
1,4
2,0
2,9
3,7
7,3
9,0
11,5
15,9
17,2
23,1
25,8
27,4
31,0
1,5
2,1
3,2
4,1
8,4
10,3
13,2
18,2
19,8
26,9
30,0
31,7
36,5
1,7
2,3
3,5
4,5
8,7
10,7
13,6
18,8
20,3
27,6
30,9
32,8
37,2
1,6
2,3
3,2
4,1
8,0
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,1
1,5
2,2
2,8
5,6
6,9
8,8
12,3
13,2
17,9
20,1
21,6
24,8
1,4
2,0
2,9
3,8
7,7
9,4
12,1
16,7
18,0
24,5
27,5
29,0
33,0
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 29
> 27
> 22
> 18
A
< 0,5
> 90
> 90
> 80
310 / 30
340
2,5
na
2-4
> 30
> 28
> 26
> 22
A
< 0,5
> 90
> 85
> 70
45,5 / 19,6
65,1
2,5
3
2-4
> 30
> 28
> 26
> 22
A
< 0,5
> 90
> 80
> 70
35 / 18,6
53,6
2,5
4
2-4
> 30
> 28
> 26
> 22
A
< 0,5
> 90
> 90
> 90
14 / 12
26
5
10
2-5
> 30
> 28
> 26
> 22
A
< 0,5
> 85
> 90
> 85
22,5 / 14,9
37,4
3
6
2-4
> 30
> 28
> 26
> 22
A+
< 2,5
> 95
> 90
> 85
22,5 / 13,2
35,7
3
6
2-4
> 30
> 28
> 26
> 22
A+
< 2,5
> 95
> 90
> 80
18 / 13,9
31,9
3
8
2-4
> 30
> 28
> 23
> 20
A+
< 2,5
> 95
> 90
> 80
8,5 / 7,5
16,0
8
16
2-3
> 30
> 28
> 26
> 22
A+
< 2,5
> 95
> 85
> 75
18 / 11
29
3
8
2-4
mode
m
m
mod.
item
reel
100
500
R100S
-
coil
200
1200
S200M
DS100
coil
150
900
S150M
DS100
reel
200
400
R200L
-
coil
100
600
S100M
DS100
coil
100
600
S100M
DS100
coil
100
600
S100M
DS100
drum
500
500
PD500
-
coil
100
600
S100M
DS100
Class A/A+
Digital Drop Coaxials
SA > 85/95 dB
SAT752F
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner/outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern(look at page 25)
Fits CABLEBOX
coil
250
500
S250L
DS250
DG113
NEW
RP61B
Tools & Connectors (look at pages 26-29)
6
COAXIAL CABLE
SINCE 1 9 6 8
7
Standard Drop Coaxials SA >75 dB
2. Braid
Braid Optical Coverage
Protection
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner / outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern(look at page 25)
Fits CABLEBOX
SAT703-2G
17PAtC
KF114
KF114N - KF114/MA
dia. mm
material
material
dia. mm
0,80
Cu
PEG
3,50
1,00
Cu
PEG
4,75
1,13
Cu
PEG
4,80
1,13
Cu
PEG
4,80
1,13
Cu
PEG
4,80
1,13
Cu
PEG
4,80
material
APA
AP
APA
APA
APA
Cu/Pet
material
%
dia. mm
material
dia. mm
material
dia. mm
CuSn
47
4,00
CuSn
38
5,22
CuSn
45
5,30
CuSn
45
5,30
Cu
37
5,30
PVC
6,60
CuSn
45
5,30
PE
6,30
PVC
7,60
PVC
5,00
PVC
6,60
PE
6,80
PVC
6,60
kg/km
kg/km
8,9
23,6
11,4
38,6
14,5
39,5
14,5
50,5
14,5
36,0
17,2
40,6
mm
N
25/50
90
35/70
150
35/70
150
40/80
150
35/70
150
35/70
150
Ohm
pF/m
%
75±3
52±2
85
75±3
54±2
82
75±3
52±2
85
75±3
52±2
85
75±3
52±2
85
75±3
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
2,3
2,8
4,6
5,6
10,9
13,7
17,4
23,3
25,2
34,0
38,2
40,4
44,2
2,0
2,8
3,8
4,6
8,6
10,5
13,6
18,8
20,4
27,8
31,1
33,3
37,7
1,6
2,1
3,2
4,1
7,9
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,6
2,1
3,2
4,1
7,9
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,6
2,1
3,2
4,1
7,9
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,4
2,0
3,0
3,7
7,8
9,6
11,9
16,5
17,8
24,2
27,1
28,8
32,6
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
B
< 15
> 80
> 80
> 75
35 / 26
61
2,5
4
2-4
> 30
> 28
> 26
> 22
B
< 15
> 75
> 80
> 67
22,5 / 33
55,5
3
6
2-4
> 30
> 28
> 26
> 22
B
< 15
> 80
> 80
> 70
18 / 22
40
3
8
2-4
> 30
> 28
> 26
> 22
B
< 15
> 80
> 80
> 70
18 / 22
40
8
8
2-5
> 30
> 28
> 26
> 22
A
<5
> 85
> 80
> 70
18 / 22
40
5
8
2-5
> 30
> 28
> 26
> 22
B
< 15
> 75
> 85
> 75
18 / 22
40
3
8
2-4
mode
m
m
mod.
item
coil
150
900
S150M
DS100
coil
100
600
S100M
DS100
reel
200
400
R200L
DS250
coil
100
600
S100M
DS100
coil
250
500
S250L
DS250
coil
100
600
S100M
DS100
coil
250
500
S250L
DS250
coil
250
500
S250L
DS250
coil
100
600
S100M
DS100
The
following
notes
provide
additional information regarding the
quality of CAVEL cables.
What is a “physical gas
injected” dielectric?
Gas injection is the technology used
for producing the physical foam
dielectric of coaxial cables since the
early ‘90s. Before this technology
was introduced the blowing up of the
foam PE dielectric insulation was
done by chemical powders. They
were blended together with Low
Density solid Polyethylene (LDPE)
which decomposed the powders into
gas under the effect of extrusion
temperature. That method limited
the mechanical strength of the
dielectric and jeopardised the life
of the attenuation values, mainly
due to the presence of moisture in
the environment. By contrast, an
insulation made with nitrogen gas
physically injected into High Density
Polyethylene
(HDPE)
produces
a foam dielectric that grants the
cable much better mechanical,
electrical and ageing performance,
almost equivalent to that of a solid
PE dielectric. This is particularly
beneficial where a coaxial cable
is exposed to crushing, squashing
and bending manoeuvres during
installation. Gas injection also
ensures a longer life span and stable
attenuation values. In accordance
with IEC 68-2-3 specifications which
prescribe an ageing test of 21 days
at 40°C and relative humidity of 93%,
further tests show that attenuation
increases less than 5% over original
values. The graph shows the
attenuation increase (at 1750 MHz)
of two equivalent cables, one made
with chemical foam dielectric and the
other with physical foam dielectric.
BEFORE
AFTER
-60
-50
-40
-30
-20
coil
250
500
S250L
DS250
-10
0
Increase %:
Chemical
68%
Skin-Foam-Skin extrusion
Firstly CAVEL cables are extruded
by physical foam PE gas injection
with the aim of reducing their rate
of ageing, which is mainly due
to moisture ingress. In addition,
this extrusion ensures optimal
performance thanks to Skin-FoamSkin technology. It consists of a
triple extrusion made of:
a 1st layer of solid PE skin covering
the inner conductor
a 2nd section formed by the main
extrusion of physical foam PE gas
injected dielectric
a 3rd layer, also of solid PE skin,
covering the dielectric
Thanks to this technology, the
first PE layer protects the inner
conductor against any horizontal
moisture ingress so that no
conductor oxidation may occur;
this is in addition to the adhesion
of a suitable dielectric over the
inner conductor. Furthermore, the
stronger geometry of the dielectric
section improves the eccentricity of
the inner conductor, especially in the
presence of cable bends; this results
in extended stability of the electrical
parameters. The outer skin also
preserves the integrity of the cable
against
longitudinal
moisture
ingress; this is in combination with
PIB protection, as explained in
further detail below.
outer skin
inner skin
inner
conductor
foam
dielectric
Standard
Drop Coaxials
SA >75 dB
KF114
SAT703-2G
SAT703B
PIB protection
An exclusive protection system
consisting of a layer of PolyIso-Butylene (PIB) covering the
dielectric of cables not provided
with bonded Al foil film.
It acts as an additional moisture
barrier and ensures excellent
attenuation stability throughout the
life of the cable.
-26,4 dB
Screen
1. Film Foil Laminate
SAT703N
-25,4 dB
Dielectric
SAT703B
-53,3 dB
CONSTRUCTION DATA
Inner Conductor
SAT50M
SAT50MN
-30,5 dB
SAT501N
-dB/100 m
SAT501
CAVEL code
Gas Injected
<5%
Attenuation differencies after IEC 65-2-3 cycle
Tools & Connectors (look at pages 26-29)
8
COAXIAL CABLE
SINCE 1 9 6 8
9
ABOUT HALOGENS
Security Drop Coaxials LSZH Sheath
DG80ZH
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner/outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern (look at page 25)
Fits CABLEBOX
SAT703ZH
DG113ZH
DG163ZH
22/99ZH
dia. mm
material
material
dia. mm
0,80
Cu
PEG
3,50
1,13
Cu
PEG
4,80
1,13
Cu
PEG
4,80
1,63
Cu
PEG
7,20
2,20
Cu
PEG
9,90
material
APA
APA
APA
APAS
Cu/Pet
%
material
dia. mm
dia. mm
material
65
CuSn
4,00
5,00
LSZH
45
CuSn
5,30
6,60
LSZH
72
CuSn
5,30
6,60
LSZH
78
CuSn
7,85
10,10
LSZH
55
Cu
10,48
12,70
LSZH
kg/km
kg/km
11,1
26,7
14,5
40,5
19,2
45,2
40,5
102,0
60,3
148,3
mm
N
25/50
90
35/70
150
35/70
150
100
300
150
600
Ohm
pF/m
%
75±3
52±2
85
75±3
52±2
85
75±3
52±2
85
75±2
52±2
85
75±2
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
2,1
3,0
4,4
5,7
11,0
13,5
16,8
23,0
24,9
33,5
37,4
39,6
44,8
1,6
2,1
3,2
4,1
7,9
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,6
2,3
3,2
4,1
8,0
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,1
1,5
2,2
2,8
5,6
6,9
8,8
12,3
13,2
17,9
20,1
21,6
24,8
0,8
1,1
1,5
2,0
4,0
4,9
6,4
9,1
9,8
13,3
14,9
15,7
18,3
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
A
<5
> 90
> 80
> 70
35 / 18,6
53,6
2,5
4
2-5
> 30
> 28
> 26
> 22
B
< 15
> 80
> 80
> 70
18 / 22
40
3
8
2-5
> 30
> 28
> 26
> 22
A+
< 2,5
> 95
> 90
> 80
18 / 13,9
31,9
3
8
2-5
> 30
> 28
> 23
> 20
A+
< 2,5
> 95
> 90
> 80
8,5 / 7,5
16
5
16
2-3
> 30
> 28
> 23
> 20
A
<5
> 90
> 100
> 85
5 / 8,5
13,5
5
21
2-3
mode
m
m
mod.
item
coil
150
900
S150M
DS100
coil
100
600
S100M
DS100
drum
500
500
PD500
-
drum
500
500
PD500
-
coil
250
500
S250L
DS250
coil
100
600
S100M
DS100
coil
250
500
S250L
DS250
The CAVEL coaxial cables included
in this series, identified by the
suffix ZH (Zero Halogen), have been
provided with a RAL7001 grey outer
sheath. For safety purposes, the
sheaths are made with a special
thermoplastic compound that has
special flame-retardant properties.
It is well known that ducts crowded
with cables can lead to the rapid
propagation of fire and that the
greatest danger to health and life
is the inhalation of toxic fumes
generated by the combustion of
thermoplastic materials. Fumes
generated by the combustion of
chlorine-based compounds, such as
PVC, have:
- high corrosive power, capable of
damaging all common electronic
devices;
- high toxicity levels, inasmuch as
500 ppm of hydrochloric acid can
be fatal after an exposure of 15
minutes, as opposed to 100,000 ppm
of carbon dioxide or 4,000 ppm of
carbon monoxide.
With the aim of supplying our
customers a number of safety cables
covering a wide variety of possible
applications, we present our current
range of ZH coaxials, provided
with a sheath having the following
characteristics:
- flame and fire retardant
both for the single cable and a cable
bundle vertically installed
- low smoke and fume emission
- zero halogen
- UV resistant
Security
Drop Coaxials
LSZH Sheath
DG163ZH
The ZH sheath on our coaxial cables
has been homologated:
- in the ‘90s, by the ISPT (Italian
Superior Institute for Post and
Telecommunications);
- in 2008, by the EZC (Electrotechnical
Testing Institute) of Czech Republic.
We recommend the use of this range
of cables for any installation in
public buildings and environments
where there is a likely presence
of many people, e.g.: hospitals,
schools, hotels, banks, tube stations,
cinemas, theatres, airports etc.
In addition to the special safety
characteristics of the outer sheath,
these ZH coaxial cables have
the same physical and electrical
characteristics as the equivalent
SAT, DG and trunk cables. Therefore,
they can be used to cover most
applications in terrestrial, satellite
and digital installation systems.
DG113ZH
SAT703ZH
Tools & Connectors (look at pages 26-29)
10
COAXIAL CABLE
SINCE 1 9 6 8
11
SMATV Multicore Coaxials
MULTISWITCH 1st IF DISTRIBUTION
Construction
2x
5x
9x
2x
5x
9x
Both single and community satellite
reception systems are often provided
with a duel-feed parabolic antenna,
i.e. where the satellite dish is
provided with two LNBs, suitable for
receiving signals from two different
satellites or groups of satellites. In
this case the drop line requires two
coaxial cables, one for each LNB.
Furthermore,
the
multiswitch
distribution system makes it possible
to independently distribute, among
all users in the same building, a
wide range of both satellite and
terrestrial TV signals. For this
reason the need for the so-called
“light cabling system” is fulfilled by
the use of multicore coaxials.
Due to this technology the signals
distribution requires:
- 4 coaxials for the satellite
distribution and 1 coaxial for the
terrestrial distribution, where the dish
is provided with 1 converter
2xDG80
CAVEL code
5xDG80M
9xDG80M
2x17VAtC
5x17VAtCM
9x17VAtCM
- 2 groups of 4 coaxials for the
satellite distribution and 1 coaxial
for the terrestrial if the dish is
provided with 2 LNBs
CONSTRUCTION DATA
Central Filler
A
Single cable
B
Single Cable’s Sheath
material -
white PVC
dia. mm
-
code
DG80 (1)
3,50
8,50
white PVC
-
DG80 (1)
material dia. mm
4,80
17VAtC (2)
11,40
white PVC with colored stripe
-
white PVC with colored stripe
-
5,00
-
6,80
Spirally Wrapped Film
C
material -
Pet
-
Pet
Outer Sheath
E
material white PVC
black PE (flexible)
We designed the twin and multicore
coaxials shown here with the aim
of offering the easiest solutions to
professional installers. The use of
these cables allows installers to
save a lot of time when laying the
distribution network.
17VAtC (2)
white PVC
black PE (flexible)
Inner Diameter
D1 mm
-
13,60
18,55
-
18,45
24,85
Outer Diameter
D2 mm
5x11,00
15,00
19,80
6,8x14,6
20,00
26,20
2x
2 coaxials for dual feed parabolic
antenna
PHYSICAL DATA
Copper Content
kg/km
22,3
57,4
101,7
28,9
72,5
133,6
Cable Weight
kg/km
56,3
216,2
364,2
81,7
360,0
670,0
Put-up
mode
reel
drum
drum
reel
drum
drum
Unit Length
m
100
100
100
100
100
50
5x
4 coaxials for 1 satellite drop line
2 coaxials for the terrestrial drop line
Standard Packing
Unit Length Weight
kg
6,3
26,6
36,4
8,8
41,0
40,5
74,7
Unit Packing Content
m
200
100
100
200
100
50
100
9x
4+4 coaxials for 2 satellite drop lines
1 coaxials for the terrestrial drop line
Packing Pattern (look at page 25)
mod.
R100L
PD500
PD500
R100L
PD100
PD50 PD100
Fits CABLEBOX
item
DS250
-
-
DS250
-
-
A
A
Tools & Connectors (look at pages 26-29)
B
(1) single cable’s data at page 6
(2) single cable’s data at page 8
B
COAXIAL CABLE
B
A
C
B
A
E
C
B
E
C
B
A
B
A
C
C
B
E
E
C
A
E
B
E
B
B
C
A
B
B
C
9x9x9x
E
C
A
A
A
E
B
B
B
C
E
C
E
C
Twin cables
Both 2xDG80 and 2x17VAtC have
just one of the cables printed on
the outer sheath; this facilitates the
connection of remote poles.
E
E
B
D1 D2
D1 D2
D1 D2
5x 5x5x
A
B
D1D1 D2
D2
D1 D2D1 D2
2x 2x2x
12
100
D1 D2
2x2x
2x
5x
5x
5x
D1 D2
D1 D2
D1 D2
9x
9x
Colour Coding
of Multicore Coaxial Cables
Each single cable in the bundle
has two coloured stripes on the
outer sheath, except for the whitesheathed cable in the core of the
bundle. This makes it easier to
identify the cables and insert further
remote poles.
Furthermore, we have adopted the
colour coding system already used
by several European manufactures
of active and passive components
and equipment designed for
multiswitch distribution.
By
convention
the
following
functions have been assigned to this
colour coding system:
SMATV
Multicore Coaxials
9x
Colour Function
Red
High Band Vertical
Yellow High Band Horizontal
WhiteTerrestrial
GreenLow Band Horizontal
BlackLow Band Vertical
Multicore coax with multipurpose
outer jacket “M”
Initially, these cables were made
with a common hard PE jacket,
the stiffness of which made their
installation quite difficult, if not
impossible.
With the aim of making it easier to
install these cables in both outdoor
and underground applications, they
have been provided with a flexible
black PE outer sheath compound.
The M suffix in the code identifies
these versions, which entered
production at the start of 2010.
This jacket is not only flameretardant but also zero-halogen
(halogen-free), therefore it is
fire-safe and suitable for indoor
applications. Outdoor installations
are also possible due to the
compound’s carbon black content
and resistance to UV rays.
For underground applications we
recommend installation in pipes
and ducts.
5x
2x
D1 D2
9x
SINCE 1 9 6 8
13
Distribution and Trunk Coaxials
Outdoor and Underground Installation
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Flooding Compound Filling
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner / outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length Content
Packing Pattern(look at page 25)
CATV11
RG11FC
11/50FC
17/73FC
22/99FC
27/115FC
34/145FC
dia. mm
material
material
dia. mm
1,63
Cu
PEG
7,20
1,63
FeCu
PEG
7,20
1,13
Cu
PEG
4,80
1,63
Cu
PEG
7,20
2,20
Cu
PEG
9,90
2,70
Cu
PEG
11,50
3,40
Cu
PEG
14,50
material
APAS
APA
Cu/Pet
Cu/Pet
Cu/Pet
Cu/Pet
Cu
material
%
dia. mm
material
CuSn
63
7,85
PJ
Al
65
7,94
PJ
Cu
60
5,38
PJ
Cu
64
7,78
PJ
Cu
55
10,48
PJ
Cu
52
12,20
PJ
Cu
61
15,26
PJ
dia. mm
material
10,10
PE
10,10
PE
7,30
PE
10,10
PE
12,70
PE
15,00
PE
19,80
PE
kg/km
kg/km
34,9
83,5
70
22,9
46
40,6
85,6
60,3
128,4
84,4
178
153
332
mm
N
100
300
100
800
50
200
100
300
150
600
200
800
250
1200
Ohm
pF/m
%
75±2
52±2
85
75±2
53±2
85
75±3
52±2
85
75±2
52±2
85
75±2
52±2
85
75±2
52±2
85
75±2
53±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
1,1
1,5
2,2
2,8
5,6
6,9
8,8
11,9
12,8
17,9
19,8
21,0
24,0
1,1
1,5
2,2
2,8
5,6
6,9
8,8
12,3
13,2
18,5
20,8
22,2
25,3
1,5
2,1
2,9
3,8
7,9
9,7
12,0
16,8
17,9
24,8
27,3
29,1
33,0
1,1
1,5
1,9
2,5
5,3
6,5
8,3
11,5
12,4
17,1
19,2
20,4
23,3
0,8
1,1
1,5
2,0
4,0
4,9
6,4
9,1
9,8
13,3
14,9
15,7
18,3
0,8
1,1
1,3
1,7
3,4
4,2
5,5
7,7
8,4
11,4
12,8
13,6
15,4
0,5
0,7
1,1
1,4
2,9
3,6
4,6
6,4
6,9
9,4
10,6
11,5
13,3
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 23
> 20
A
<5
> 85
> 100
> 90
8,5 / 10
18,5
8
16
2-3
> 30
> 28
> 23
> 20
A
<5
> 90
> 85
> 85
37,5 / 11,5
49
8
8
2-3
> 30
> 28
> 26
> 22
A
<5
> 85
> 85
> 70
18 / 13,5
31,5
8
8
2-5
> 30
> 28
> 23
> 20
A
<5
> 85
> 95
> 85
8,5 / 9,5
18
8
16
2-3
> 30
> 28
> 23
> 20
A
<5
> 90
> 100
> 85
5 / 8,5
13,5
8
21
2-3
> 25
> 24
> 23
> 22
A+
< 2,5
> 95
> 95
> 85
3,4 / 5,8
9,2
8
25
2-3
> 25
> 24
> 21
> 20
A+
< 2,5
> 95
> 85
> 80
2,1 / 2,6
4,7
12
34
2-3
mode
m
mod.
drum
500
PD500
drum
500
PD500
drum
500
PD500
drum
500
PD500
drum
500
PD500
drum
500
WD500
drum
700
WD700
COAXIAL CABLES
FOR CATV SYSTEMS
Presented below are some features
of CAVEL distribution and trunk
cables which are widely represented
in different versions within this
catalogue.
All of these products have some
common features including:
Distribution and Trunk
Coaxials Outdoor and
Underground Installation
RG11FC
- low losses
17/73FC
- high screening effectiveness, also
known as screening attenuation (SA)
- long-lasting stability of signal
attenuation thanks to physical
gas injected foam PE dielectric
technology (skin-foam-skin).
CATV11
All are suitable for laying branch
stretches of long TV and Triple Play
broadband distribution systems.
They are an excellent means of
distribution for any terrestrial
and satellite TV system as well as
telephone and internet services.
Furthermore they provide stable
SRL and attenuation ranging from 5
to 3000 MHz
SUGGESTED
APPLICATIONS
Only cables provided with a specific
PE outer sheath, strong enough
to protect the coaxial core from
the environment, must be used
for outdoor and underground
installations.
In addition, both our series of cables
for underground installation as well
as those provided with messenger
for suspended installations, are
provided with a petrol jelly (PJ)
flooding compound filling. It is
interposed between the braid and
the outer PE sheath to prevent
moisture ingress. Furthermore, it is
a non-dropping compound so it can
also be safely used in vertical cable
stretches.
to be continued >
Tools & Connectors (look at pages 26-29)
14
COAXIAL CABLE
SINCE 1 9 6 8
15
Distribution Coaxials
Outdoor Hung-up Installation with Messenger
CAVEL code
CONSTRUCTION DATA
Inner Conductor
dia. mm
material
material
dia. mm
Dielectric
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Flooding Compound Filling
FeZn Messenger
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner / outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length Content
Packing Pattern (look at page 25)
DG113PEM
CATV11AP
22/99AP
27/115AP
34/145AP
1,13
Cu
PEG
4,80
1,63
Cu
PEG
7,20
2,20
Cu
PEG
9,90
2,70
Cu
PEG
11,50
3,40
Cu
PEG
14,50
material
material
%
dia. mm
material
size mm
size mm
material
APA
CuSn
72
5,30
PJ
1xØ1,25
6,8x11,2
PE
APAS
CuSn
63
7,85
PJ
7xØ0,80
10,1x17
PE
Cu/Pet
Cu
55
10,48
PJ
7xØ0,80
12,7x18,5
PE
Cu/Pet
Cu
52
12,20
PJ
7xØ0,80
15x22,5
PE
Cu
Cu
61
15,26
PJ
7xØ0,80
19,8x25,5
PE
kg/km
kg/km
19,2
58,7
34,9
122,4
60,3
171,3
84,4
219,7
153
370,4
mm
N
35/70
150
100
300
150
600
200
800
250
1200
Ohm
pF/m
%
75±3
52±2
85
75±2
52±2
85
75±2
52±2
85
75±2
52±2
85
75±2
53±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
1,6
2,3
3,2
4,1
8,0
9,8
12,4
17,1
18,5
24,9
27,9
29,6
33,4
1,1
1,5
2,2
2,8
5,6
6,9
8,8
11,9
12,8
17,9
19,8
21,0
24,0
0,8
1,1
1,5
2,0
4,0
4,9
6,4
9,1
9,8
13,3
14,9
15,7
18,3
0,8
1,1
1,3
1,7
3,4
4,2
5,5
7,7
8,4
11,4
12,8
13,6
15,4
0,5
0,7
1,1
1,4
2,9
3,6
4,6
6,4
6,9
9,4
10,6
11,5
13,3
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
A+
< 2,5
> 95
> 90
> 80
18 / 13,9
31,9
5
8
2-5
> 30
> 28
> 23
> 20
A
<5
> 85
> 100
> 90
8,5 / 10
18,5
8
16
2-3
> 30
> 28
> 23
> 20
A
<5
> 90
> 100
> 85
5 / 8,5
13,5
8
21
2-3
> 25
> 24
> 23
> 22
A+
< 2,5
> 95
> 95
> 85
3,4 / 5,8
9,2
8
25
2-3
> 25
> 24
> 21
> 20
A+
< 2,5
> 95
> 85
> 80
2,1 / 2,6
4,7
12
34
2-3
mode
m
mod.
drum
500
PD500
drum
500
PD500
drum
500
WD500
drum
500
WD500
drum
700
WD700
In combination with the use of sealed hardline connectors, we recommend that these
cables are installed in any environment
where the presence of water or a high
moisture ratio are likely, such as tunnels,
underground parks etc.
Both the underground cables and the ones
with messenger are available in a wide
range of cable sizes.
As drop cables we offer 11/50FC for
underground applications and DG113PEM
for suspended applications, the latter
provided with a single wire messenger.
In the group of RG11 distribution cables
the 17/73FC is recommended for
underground installation together with
CATV11 and RG11FC, while CATV11AP is
the one with messenger. From this size
up, the messenger is always a stranded
rope with a maximum pulling force in
excess of 500 kg.
Cables with inner conductors sized 2.2, 2.7
and 3.4 mm complete the offer of the trunk
series, both for underground and with
messenger cables.
Distribution Coaxials
Outdoor Hung-up
Installation with Messenger
22/99AP
CATV11AP
We recommend that all cables laid
underground are installed in pipes and ducts,
even if this solution implies a higher initial
installation cost. In addition to substituting
a faulty cable, it may be necessary to update
the network distribution with different
transmission means.
Tools & Connectors (look at pages 26-29)
16
COAXIAL CABLE
SINCE 1 9 6 8
17
Radio Frequency Coaxials
According to MIL-C-17 Specs.
Hybrid Coaxials
for Special Applications
50 Ohm
RG174A/U
RG58C/U
RG213/U
RG59B/U
dia. mm
material
material
dia. mm
7x0,16
FeCu
PE
1,50
19x0,18
CuSn
PE
2,95
7x0,75
Cu
PE
7,25
0,58
FeCu
PE
3,70
%
material
dia. mm
88
CuSn
1,90
93
CuSn
3,43
96
Cu
7,97
94
Cu
4,30
dia. mm
material
2,80
PVC II
5,00
PVC II
10,30
PVC II
6,15
PVC II
kg/km
kg/km
4,6
11,8
16,6
35,9
73,8
151,3
20,1
51,8
mm
N
15/30
120
25/50
90
50/100
400
30/60
200
Ohm
pF/m
%
50 ± 2
101 ± 2
66
50 ± 2
100 ± 2
66
50 ± 2
100 ± 2
66
75 ± 3
66 ± 2
66
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
20,0
42,5
51,0
63,0
86,1
97,0
10,7
23,5
29,6
38,7
55,4
61,1
4,1
9,0
11,3
14,8
21,2
23,6
7,7
16,0
19,9
25,4
35,3
38,7
dB
dB
dB
> 21
> 19
> 18
> 26
> 25
> 24
> 27
> 26
> 24
> 28
> 25
> 23
mΩ/m
dB
Ohm/km
Ohm/km
11
> 55
290 / 42
332
8
> 55
38,5 / 16,5
55
8
> 55
6,5 / 4,5
11
15
> 55
158 / 11
169
W
W
W
kV
MIL-C-17
50
25
15
2
119F
200
60
35
5
28C
830
320
180
5
74C
300
135
75
3
29C
mode
m
m
mod.
item
reel
100
500
R100S
-
coil
150
900
S150M
DS100
reel
100
200
R100L
DS250
coil
100
600
S100M
DS100
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
Screen
Braid
Braid Optical Couverage
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity Ratio
Attenuation (at 20°C)
at 50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
Structural Return Loss (SRL)
at 30 - 300 MHz
at 300 - 600 MHz
at 600 - 1000 MHz
Screening Attenuation (SA)
at 5 - 30 MHz
at 30 - 1000 MHz
DC Resistance: inner/outer
Loop Resistance
Maximun Power
at 100 MHz
at 400 MHz
at 1000 MHz
Sheath Insulation Voltage
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern (look at page 25)
Fits CABLEBOX
Tools & Connectors (look at pages 26-29)
18
75 Ohm
COAXIAL CABLE
CAVEL code
CONSTRUCTION DATA
Inner Conductor
Dielectric
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Inner Sheath
Non Migrating Film
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner / outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern(look at page 25)
Fits CABLEBOX
SAT501 AWG
SAT50M DF2N
11/48LO PIPE
dia. mm
material
material
dia. mm
0,80
Cu
PEG
3,50
1,00
Cu
PEG
4,75
1,13
Cu
PEG
4,80
material
APA
AP
Cu/Pet
material
%
CuSn
47
material
dia. mm
dia. mm
PVC
5,00
4,00
material
size mm
material
Pet
6,0x8,2
PVC
Pet
9,8x11,5
PVC
kg/km
kg/km
12,5
44,7
24,0
92,0
mm
N
25/50
90
35/70
150
50
200
Ohm
pF/m
%
75±3
52±2
85
75±3
54±2
82
75±3
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
2,3
2,8
4,6
5,6
10,9
13,7
17,4
23,3
25,2
34,0
38,2
40,4
44,2
2,0
2,8
3,8
4,6
8,6
10,5
13,6
18,8
20,4
27,8
31,1
33,3
37,7
1,5
2,1
2,9
3,8
7,9
9,7
12,0
16,8
17,9
24,8
27,3
29,1
33,0
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
B
< 15
> 80
> 80
> 75
35 / 26
61
2,5
4
2-4
> 30
> 28
> 26
> 22
B
< 15
> 75
> 80
> 67
22,5 / 33
55,5
3
6
2-4
> 30
> 28
> 26
> 22
A
<5
> 85
> 85
> 70
18 / 13,5
31,5
8
8
2-5
mode
m
m
mod.
item
reel
200
400
R200L
DS250
reel
100
200
R100L
DS250
drum
400
400
PD400
-
Tools & Connectors (look at pages 26-29)
Twisted Pair
1x2x24AWG
Ø 0,51Cu
Ø 1,10PE
CuSn
38
PVC
6,60
5,22
Twisted Pair
1x2x24AWG
Ø 0,51Cu
Ø 1,10PE
+
Electrical Leads
2x0,5 sq.mm
Max. Curr. 4A
Max. Volt. 50V
Res. 37 Ω/km
Cu
53
PE
7,30
5,30
Empty Tube
HDPE
inner Ø 5,5
outer Ø 7,2
8,1x15,3
PE
22,3
76,6
SINCE 1 9 6 8
19
VS80 specifically
designed for CCTV
Video Security Coaxial Cables - Multipurpose Installation
VS80
CAVEL code
CONSTRUCTION DATA
Inner Conductor
material
dia. mm
material
dia. mm
Dielectric
Cu
0,80
PEG
3,50
VS80 205
Cu
0,80
PEG
3,50
VS80 210
Electrical Leads
2x0,5 sq.mm
Max. Curr. 4A
Max. Volt. 50V
Cu
0,80
PEG
3,50
Res. 37 Ω/km
Screen
1. Film Foil Laminate
2. Braid
Braid Optical Coverage
Sheath
Non Migrating Film
Outer Sheath
PHYSICAL DATA
Copper Content
Cable Weigth
Min. Bending Radius:
single/repeated bends
Max. Pulling Strength
ELECTRICAL DATA
Impedance
Capacitance
Velocity ratio
Attenuation (at 20°C)
at
5 MHz
at
10 MHz
at
30 MHz
at
50 MHz
at 200 MHz
at 300 MHz
at 470 MHz
at 862 MHz
at 1000 MHz
at 1750 MHz
at 2150 MHz
at 2400 MHz
at 3000 MHz
Structural Return Loss (SRL)
at
5 - 470 MHz
at 470 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
Screening Attenuation (SA)
at
5 - 30 MHz (TI)
at 30 - 1000 MHz
at 1000 - 2000 MHz
at 2000 - 3000 MHz
DC Resistance: inner/outer
Loop Resistance
Sheath Insulation Voltage
Max. Current (Ieff)
Specification Conformity
Standard Packing
Put-up
Unit Length
Unit Packing Content
Packing Pattern(look at page 25)
Fits CABLEBOX
Electrical Leads
2x1,0 sq.mm
Max. Curr. 8A
Max. Volt. 50V
Res. 18 Ω/km
material
APA
APA
APA
material
%
dia. mm
CuSn
65
4,00
CuSn
65
4,00
CuSn
65
4,00
material
dia. mm
material
material
size mm
LSZH
5,00
LSZH
5,00
Pet
LSZH
7,2x9,0
LSZH
5,00
Pet
LSZH
7,2x9,8
kg/km
kg/km
11,1
26,7
20,0
66,5
27,8
78,0
mm
N
25/50
90
Ohm
pF/m
%
75±3
52±2
85
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
dB/100m
2,1
3,0
4,4
5,7
11,0
13,5
16,8
23,0
24,9
33,5
37,4
39,6
44,8
dB
dB
dB
dB
class
mΩ/m
dB
dB
dB
Ohm/km
Ohm/km
kV
A
EN50117
> 30
> 28
> 26
> 22
A
< 2,5
> 90
> 80
> 70
35 / 18,6
53,6
2,5
4
2-5
mode
m
m
mod.
item
coil
150
900
S150M
DS100
As an alternative to obsolete
RG/U cables in accordance with
MIL standards, CAVEL offers the
VS80 single coaxial cables and two
versions provided with electrical
leads. All are provided with an outer
sheath with the following features:
- flame-retardant
- low smoke and fume emission
- zero halogen
- UV resistant
They are suitable for indoor and
outdoor installations as well as for
fire-safe installations.
attenuation) and, above all, very long
routing distances without requiring
signal amplification, all critical
features for high quality cuttingedge installations.
As an alternative to obsolete MIL
standard cables, which are still
frequently used in video security
systems, CAVEL offers the VS80
coaxial cable with:
- physical foam PE dielectric,
providing optimised attenuation and
- a double screen providing Class A
screening attenuation, according to
EN50117 specifications.
The video security sector is
constantly developing due to the
increasing demand for remote
controlled security systems in both
private and public sectors. Many
systems use analogue cameras
(4-6 MHz frequency base band or
composite video), although digital
systems are gaining in popularity.
The same cable is also available in
the versions:
- VS80205 which has two coupled
electrical leads (2x0.50 mm2
section) and
- VS80210 (2x1.00 mm2),
both suitable for feeding power to
remote devices.
The outer sheath, containing both
the coaxial cable and the two power
conductors,
ensures
electrical
insulation up to 1000V.
Installers traditionally use classic
components, namely MIL standard
type coaxial cables with PVC outer
sheath and solid polyethylene
dielectric, such as:
RG59B/U, KX6 and URM70.
These cables have been surpassed
on a technical level by coaxial cables
with gas injected foam PE dielectric
and foil/braid screen.
The latest generation of TV cables
afford superior performance in terms
of signal loss (attenuation), shielding
from interfering signals (screening
Video Security
Coaxial Cables
Multipurpose Installation
VS80205
VS80210
VS80
The main differences with respect to
conventional RG/U cable are shown
in the table below.
In addition, CAVEL offers a series
of connectors as well as cable
accessories designed specifically for
professional CCTV system engineers
(see Cross Ref. Table on page 30).
Main differences between RG59 and CAVEL VS80
reel
150
300
R150L
DS250
reel
150
300
R150L
DS250
Parameters
RG59
VS80
Attenuation @ 5 MHz
[dB/100m]
(typical analogue camera application)
2.5
2.1
Attenuation @ 200 MHz
16,0
11,0
[dB]
> 55
> 90
[mm]
6.15
5.00
[dB/100m]
Screening Attenuation 30-1000 MHz
Outer Diameter
Tools & Connectors (look at pages 26-29)
20
COAXIAL CABLE
SINCE 1 9 6 8
21
CABLEBOX DISPENSER
PACKING SYSTEM
THE PAST old pack solution
...of just 1 pallet with 12 km of cable,
WHAT DO YOU DO WITH:
48 dirty wooden drums
or 120 useless plastic reels?
THIS IS A WASTE
DISPOSAL PROBLEM!
250 m
Until recently, coils in a box or non-returnable cardboard and plastic reels
were the most popular means of packaging TV coaxial cables. In spite of some
inconveniences, these packages were accepted as the norm.
Today, due to environmental studies and concerns, the concept of recycling
has become a paramount issue, prompting CAVEL to develop a total solution in
terms of EFFICIENCY, ECONOMY and ECOLOGY.
respect the environment
his has led to the introduction of a revolutionary product - the CABLEBOX
dispenser - a design based on the concepts of REDUCTION and REUTILISATION.
AFTER THE USE...
The CABLEBOX dispenser is made of a stand containing one reel, which can
be easily opened into two parts. These pieces, made of a shock resistant, very
strong plastic material, form a cable dispenser with a very long life expectancy.
The “refill” is represented by the coil of coaxial cable supplied by CAVEL.
The dispensers are available in two sizes, suitable for either the 100 or 250
metre coil of cable.
They can be carried and are also provided with a shoulder strap. This is a safety
feature that enables the installer to move with both hands free.
100 m
THE PRESENT new smart pack solution
of 1 pallet with14,4 km cable,
YOU WASTE JUST FEW hg
OF PAPER AND PLASTIC.
The cable will always unroll perfectly without assuming a “spiral shape”, an
annoying drawback of box dispensers that makes installation in ducts very
difficult. This is most useful when installing a bundle of cables together in
a conduit.
Rewinding excess cable back into the dispenser is very straightforward due to
the access through the centre hole.
The sheath of all CAVEL cables supplied in shrinkpack form is provided with a
decreasing meter marking, allowing the installer to check the length of a run
or drop against the remaining contents of the dispenser.
With the CABLEBOX dispenser packing system, there is no reel disposal to
consider, only a small piece of shrinkwrap.
Supplying installers with CABLEBOX dispensers offers the following advantages:
- easier installation
- savings on cost and effort
- opportunity to avoid environmental problems
- improved safety.
100 m
BY CABLEBOX
DISPENSER
Re-usable reel
DS100 dispenser
AFTER THE USE...
ECOLOGICAL
PACKING
22
COAXIAL CABLE
THIS IS A TOTAL
Authenticated Packing
SOLUTION!
respect the environment
SINCE 1 9 6 8
23
New shrinkpack disk
graphics and security hologram
After carrying out investigations we
discovered that several imitations of
CAVEL coaxial cables exist on the market.
Most are very poor-quality clones with
identical packing to our products.
To prevent our customers from buying
fakes and wasting money on low-quality
cables, we incorporated the following two
solutions into our packing materials.
Firstly we developed a new design of
shrinkpack disk that enables our dealers
and distributors to help customers
identify fake cables.
The table opposite shows in detail the
typical application of the shrinkpack disk
colours according to the different cables
and lengths.
Furthermore we applied a special
holographic label bearing the CAVEL
trademark on each of the disks, a further
safeguard against the falsification of
our products.
This label is hard to reproduce and
incorporating our trademark gives us
grounds to mount a legal challenge in the
event that it is copied.
This label certifies the origin of the
product and the high quality of our cables.
In addition, all disks bear the 15-year
warranty supplied with our cables.
mod. S100M
6x100m shrunk coils in box = 600m
mod. S150M
6x150m shrunk coils in box = 900m
mod. S200M
6x200m shrunk coils in box = 1.200m
fit CABLEBOX DS100
M
mod. S250L
2x250m shrunk coils in box = 500m
mod. S400L
2x250m shrunk coils in box = 800m
fit CABLEBOX DS 250
L
Cross Ref. Chart of Drop Cable Coils and Shrinkpack Disks
packing composition
6x Shrinkpack Coils
mod.
S100M
2x Shrinkpack Coils
S150M
S200M
S250L
S400L
shrinkpack
disks
mod. R100S
5x100m plastic reels
in box = 500m
unit length
100m
150m
200m
250m
400m
packing mode
6x100m
6x150m
6x200m
2x250m
2x400m
mod. R100M
5x100m plastic reels in box = 500m
unit packing content
600m
900m
1.200m
500m
800m
fits CABLEBOX DS 100
fit Cablebox
DS100
DS100
DS100
DS250
DS250
17PAtC
S100M
S250L
DG 113 - 113C
S100M
S250L
DG 113ZH
S100M
S250L
DG 70 - 70C
S200M
DG 80 - 80C
S150M
DG 80ZH
S150M
KF 114 - 114N - 114MA S100M
QF 100BL
M
mod. R200L
2x200m plastic reels in box = 400m
mod. R250L
2x250m plastic reels in box = 500m
fit CABLEBOX DS 250
L
S250L
S100M
RG 58C/U
mod. R500XL
1x500m plastic reels
in box = 500m
S150M
RG 59B/U
S100M
RP 61B
S100M
RP 913B
S100M
SAT 50M - 50 MN
S100M
SAT 501 - 501N
S250L
SAT 703B - 703N
S100M
S250L
SAT 703ZH
S100M
S250L
SAT 752F
S100M
TS 61L
S100M
S150M
COAXIAL CABLE
XL
mod. PD
Plywood drums
on pallet
S150M
VS 80
24
mod. R100L
2x100m plastic reels in box = 200m
mod. R150L
2x150m plastic reels in box = 300m
S
S400L
PD
mod. WD
Wooden drums for
bulk lengths on pallet
WD
SINCE 1 9 6 8
25
Tools
FC02
Nickel plated scissors
Suitable for the preparation of any coaxial cable for connector insertion,
(recommended for skilled users).
CS00
Multi-purpose stripper
Suitable for the state-of-the-art preparation of coaxial cables
with outer diameter from 5.00 to 7.00 mm.
COT02
Compression tool
suitable for
such as
for cables
F connectors
FC501, FC703 and FC11
RG59, RG6 and RG11
CRT03 (hex. .262” and .324”)
Crimping tool
suitable for
such as
for cables
Dedicated strippers
CS03J Suitable for triple shielded cable TS703J
CS17VP Suitable for PE jacketed cable 17PAtC
CS41
Suitable for mini RG59 cable CW41S
CS70
Suitable for mini cables DG70 and DG70C
F connectors
F41 and F703
Mini RG59 (CW41S) and RG6
COT04
Compression tool
CS17 – CS22 – CS27 – CS34
Dedicated stripper for distribution and trunk cables
These models have been designed to guarantee perfect cutting of each cable for
underground installation (FC series) and with messenger for suspended installation
(AP series). They make it easier to remove the PE jacket and accurately cut the
dielectric and outer screen. They facilitate the mounting of additional connectors
supplied by CAVEL and are suitable for outdoor and underground installations.
suitable forBNC connectors
such asBNCC501 and BNCC703
for cables
RG59 and RG6
CRT04 (hex. .324” and .360”)
Crimping tool
F
IEC
BNC
suitable for
such as
for cables
F connectors
F703 and hex. .360” connectors
RG6 and RG7
MT04
Mounting tool
Suitable for securely fixing any F male connector to drop cables.
COT05
Multi-purpose compression tool
with interchangeable insertions
LUB01
Cable pulling lubricant
High-performance lubricant suitable for any type of cable to be run through
conduits, ducts and pipes; reduces pulling strength, is water-based, clean
and harmless to users; it is stable at temperatures up to 82°C (180°F) and
freezes at - 5°C (23°F).
See the Cross Ref. Chart on page 30 to match tools to cables
26
COAXIAL CABLE
for cables
RG6
suitable forBNC, F and IEC connectors
such asBNCC703, FC703
and both IECCF703 and IECCM703
for cables
RG59
suitable for BNC and F connectors
such asBNCC501 and FC501
CRT05 (hex. .324” and .475”)
Crimping tool
suitable to
like
for cables
F connectors
F703 and F163
RG6 and RG11
See the Cross Ref. Chart on page 30 to match tools and connectors to cables
SINCE 1 9 6 8
27
Connectors
Connectors
F COMPRESSION
F CRIMP
TWIST-ON
ADAPTERS
FITTINGS
HARD LINE Connectors
FC501SL
F41SL
F501SL
F70SL
FA125
F81-HQ
new
C75-5L
FM
Series
F125A
F703SL
FA17
new
CCFM75GI
IEC14M
Series
new
FCSI-5.1SL
new
FR703SL
FM-FF90
fast insertion
new
TV2VS
NM
Series
Self Installing
without tools
FA501
FA70
FA703
FC11
new
F90SL
FA17/73
new
MM-F703SL
new
SAT2VS
3,5/12”M
Series
FC703SL
BNC COMPRESSION
BNCC501SL
F163
75 Ohm Terminator
DR01
Bolt, nut and washer for F81-HQ
75 Ohm
Terminator
TV 2-Way
Splitter
new
MM-FR703SL
SAT 2-Way
Splitter
5/8”MU
Series
fast insertion
HARD LINE Adapters
BNCC703SL
SP-32
IEC COMPRESSION
Splice
Reducers
Splice
Connector
new
IECFC703SL
SR01-13
SR01-32
SR01-46
SR21-44
new
IECMC703SL
28
COAXIAL CABLE
SINCE 1 9 6 8
29
Cross Reference Charts
US versus CAVEL cables
TOOLS AND CONNECTORS FOR INDOOR INSTALLATION
STRIPPER F
F
F
CABLE
TWIST-ON CRIMP
CRIMP TOOL
11/48LO PIPE
11/50FC
17/73FC
17PAtC
(FC02)
(FC02)
CS17
CS17VP
CS00
2x 5x 9x 17VAtC CS00
2x 5x 9x DG80 CS00
CS17
CATV11 - AP
CS41
CW41S
CS00
DG113 - C
CS00
DG113PEM
CS00
DG113ZH
(FC02)
DG125
CS17
DG163
CS17
DG163ZH
CS70
DG70 - C
CS00
DG80 - C
CS00
DG80ZH
KF114 - N - MA CS00
CS00
QF100BL
CS17
RG11FC
CS00
RG58C/U
CS03J
RG59B/U
CS00
RP61B
CS00
RP913B
CS00
SAT50M - MN
SAT50M DF2N CS00
CS00
SAT501 - N
CS00
SAT501 AWG
(FC02)
SAT703-2G
CS00
SAT703B - N
CS00
SAT703ZH
CS00
SAT752F
CS17
TS11J
CS03J
TS61L
CS03J
TS703J
F
COMPRESSION TOOLS and CONNECTORS FOR OUTDOOR INSTALLATION
F
F
BNC
BNC
IEC
IEC
TOOL
TOOL
TOOL
COMPR.
SELF-INSTALL
FA125
FA125
FA17/73
FA703
F125A
F125A
F163
F703
CRT 04
CRT 04
CRT 05
CRT 03-04-05
FCSI-5.1
FC703
FC703
FC11
FC703
COT 02-05
COT 02-05
COT 02
COT 02-05
BNCC703
BNCC703
BNCC703
COT 04-05
COT 04-05
COT 04-05
IECF(M)C703
IECF(M)C703
IECF(M)C703
COT 05
COT 05
COT 05
FA703
FA501
FA17/73
FA703
FA703
FA703
FA17/73
FA17/73
FA70
FA501
FA501
FA703
FA703
FA17/73
FA703
FA703
FA703
FA703
FA501
FA501
FA125
FA703
FA703
FA703
FA17/73
FA703
FA703
F703
F501
F163
F41
F703
F703
F703
F125A
F163
F163
F70
F501
F501
F703
F703
F163
F703
F703
F703
F703
F501
F501
F125A
F703
F703
F703
F163
F703
F703
CRT 03-04-05
CRT 03-04-05
CRT 05
CRT 03
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 05
CRT 05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 04
CRT 03-04-05
CRT 03-04-05
CRT 03-04-05
CRT 05
CRT 03-04-05
CRT 03-04-05
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
-
FC703
FC501
FC11
FC703
FC703
FC703
FC11
FC11
FC501
FC501
FC703
FC703
FC11
FC703
FC703
FC703
FC703
FC501
FC501
FC703
FC703
FC703
FC703
FC11
FC703
FC703
COT 02-05
COT 02-05
COT 02
COT 02-05
COT 02-05
COT 02-05
COT 02
COT 02
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02-05
COT 02
COT 02-05
COT 02-05
BNCC703
BNCC501
BNCC703
BNCC703
BNCC703
BNCC501
BNCC501
BNCC703
BNCC703
-
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
-
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
-
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
-
BNCC703
BNCC703
BNCC703
BNCC703
BNCC501
BNCC501
BNCC703
BNCC703
BNCC703
BNCC703
BNCC703
BNCC703
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
COT 04-05
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
IECF(M)C703
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
COT 05
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
FCSI-5.1
TOOLS AND HARD-LINE CONNECTORS FOR OUTDOOR AND UNDERGROUND INSTALLATION
STRIPPER
F
IEC
N
5/8”
CABLE
FM-21 11/50FC
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
17/73FC
CS22
FM-13 IEC14M-13 5/8MU-13
22/99FC - AP
CS22
FM-13 IEC14M-13 5/8MU-13
22/99ZH
CS27
FM-44 IEC14M-44 5/8MU-44
27/115FC - AP
CS34
FM-46 IEC14M-46 5/8MU-46
34/145FC - AP
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
CATV11 - AP
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
DG163
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
DG163ZH
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
RG11FC
CS17
FM-32 IEC14M-32 NM-32
5/8MU-32
TS11J
CS22
FM-13 IEC14M-13 5/8MU-13
TS22/99J
CS27
FM-44 IEC14M-44 5/8MU-44
TS27/115J
from
DG163 TS11J CATV11 RG11 17/73
11/50FC
11/50FC
11/50FC
11/50FC
any drop F connector
any drop F connector
any drop F connector
any drop F connector
30
COAXIAL CABLE
ADAPTERS
SP-32
SR01-13
SR01-32
SR01-46
SR21-44
F81-HQ
DR01
FM-FF90
MM-F703
MM-FR703
to
DG163 TS11J CATV11 RG11 17/73
any 22/99
DG163 TS11J CATV11 RG11 17/73
any 34/145
any 27/115
any drop F connector
any drop F connector
any drop F connector
any drop F connector
3,5/12”
3,5/12M-32
3,5/12M-13
3,5/12M-13
3,5/12M-44
3,5/12M-46
3,5/12M-32
3,5/12M-32
3,5/12M-32
3,5/12M-32
3,5/12M-32
3,5/12M-13
3,5/12M-44
Drop and Distribution Cables
Main Features
US
CAVEL
cable type
cable type
mini RG59
CCS wire inner conductor
CW41S
RG59
drop Class B cable, overall dia. 5,0 mm
SAT501 - N
SAT501 provided with 1 twisted pair AWG24
SAT501 AWG
multipair DG80 for Multiswitch Distribution Systems
2x 5x 9x DG80
drop Class A cable, overall dia.5,0 mm
DG80 - C
DG80 provided with LSZH outer sheath
DG80ZH
RG6
cheap RG6 Class B cable
SAT50M - MN
SAT50M provided with 1 twisted pair AWG24 and 2 leads 0,5 sq.mm
SAT50M DF2N
Cu+Cu screen Class A drop under CAI.uk benchmark
QF100BL
Class A+ drop suitable to 5,1 size connectors
RP61B
Triple Shield drop, Class A++ Screening Attenuation
TS61L
RG6+ (1)
standard Class B drop cable
SAT703B - N
SAT703 provided with LSZH outer sheath
SAT703ZH
outdoor SAT703 with double PE/PVC outer sheath
SAT703-2G
outdoor SAT703 provided with soft black PE outer sheath
17PAtC
2x 5x 9x17VAtC multipair SAT703 for Multiswith Distribution Systems
KF114 - N - MA Cu+Cu Class B drop cable
undergroung CATV drop provided with loose PE tube, for FO purpose
11/48LO PIPE
outdoor and underground drop Petrol Jelly filled
11/50FC
Class A drop cable
DG113 - C
DG113 with messenger for hung-up installation
DG113PEM
DG113 provided with LSZH outer sheath
DG113ZH
Cu+Cu screen, Class A+ drop cable
SAT752F
Double Shield drop, Class A++ Screening Attenuation (SA)
RP913B
Triple Shield drop, Class A++ SA
TS703J
RG7
Class A drop, for outdoor installation
DG125
RG11
Class B distribution cable for outdoor installation
CATV11
CATV11 with messenger rope for hung-up installation
CATV11AP
Class A distribution cable with CCS inner conductor and Al wires braid
RG11FC
Cu+Cu double shield Class A underground distribution cable
17/73FC
Class A+ distribution cable
DG163
DG163 provided with LSZH outer sheath
DG163ZH
Triple Shield Class A++ distribution cable
TS11J
Trunk Cables
US (2)
Main Features (3)
CAVEL
cable type
cable type
.320”
Cu/Pet film foil+Cu braid screen, Class A cable
22/99FC
.412”
22/99FC with messenger rope for hung-up installation
22/99AP
22/99 provided with LSZH outer sheath
22/99ZH
Triple Shield Class A++ trunk cable
TS22/99J
.500”
Cu/Pet film foil+Cu braid screen, Class A cable
27/115FC
27/115FC with messenger rope for hung-up installation
27/115AP
Triple Shield Class A++ trunk cable
TS27/115J
.540” .565”
Cu/Pet film foil+Cu braid screen, Class A cable
34/145FC
.625”
34/145FC with messenger rope for hung-up installation
34/145AP
TEMPERATURES
Minimum Installation Temperature
Any Cable- 5°C
Operating Temperatures
PVC Sheath
- 30° to 80°C
LSZH Sheath
- 25° to 80°C
PE Sheath
- 40° to 80°C
LIMIT OF RESPONSIBILITY
Every care has been taken to ensure that the information
contained in this publication is correct. No legal responsibility can
be accepted for any inaccuracy. The company reserves the right
to alter or modify the information contained herein at any time.
The coaxial cables illustrated in this catalogue must be used solely
for the purposes for which they were expressly designed, which
is the reception and distribution of audio, video and data signals.
Any other use is deemed to be inappropriate and our approval
should be sought for alternative applications. The manufacturer
and the seller decline all responsibility for any problems that may
occur due to improper, incorrect and unreasonable use.
look at
page
6
8
19
12
6
10
8
19
6
7
4
8
10
8
8
12
8
19
14
7
16
10
7
4
4
6
14
16
14
14
7
10
4
Notes
look at
page
14
16
10
4
15
16
4
15
17
Notes
(1) Among typical US cables range
exists no RG6+ reference. We introduce it just to justify our most
standard range of coaxial cables
- as well as of any other European manufacturer - whose inner
conductor size has dia.1,13 mm.
With the desinence “+” we stress
that this inner conductor size performs a better attenuation value
than an inner conductor of dia.
1,00 mm only.
(2) The US cables’ scheme by left side
is based on sizes given in inches.
(3) Typically, all US trunk cables
are rigid, due to the Al tube as outer shield, while all CAVEL trunk cables are flexible, due to the film foil
+ braid outer screen construction.
LEGEND
Al
Aluminium
FeZn
Zinc Plated Steel
AP
Al-Polyester
LSZH
Low Smoke Zero Halogen
APA
Al-Polyester-Al
N
Newton (0.1 kg approx)
APAS
Al-Polyester-Al-Surline(glue)
na
not applicable
APJ
Al-Polyester-“J folded”
PE
Polyethylene
APS
Al-Polyester-Surline(glue)
PEG
Gas Injected Physical Foam PE
AWG
American Wires Gauge
Pet
Polyester
CAI
Confederation Aerial Industries (UK)
PJ
Petrol Jelly Filling
CCS
Copper Clad Steel
PVC
Poly-vinyl-chloride
Cu
Copper
PVCII
Non-migrating PVC
Cu/Pet
Copper-Polyester
SA
Screening Attenuation
CuSn
Tinned Copper
TI
Transfer Impedance
FeCu
Copper Clad Steel (CCS)
SINCE 1 9 6 8
31
MALPENSA
MONZA
RHO
A4
MILANO
LINATE
NOVARA
ABBIATEGRASSO
MELEGNANO
VIGEVANO
VILLAMAGGIORE
GROPELLO
CAIROLI
CREMA
LODI
A1
PAVIA
CASAL PUSTERLENGO
CASALE MONFERRATO
BELGIOIOSO
LOMELLO
MEDE
TORREBERETTI
A7
02/2011
CAVA MANARA
BRESSANA
A21
VOGHERA
ITALIANA CONDUTTORI Srl
Viale Zanotti, 90 - 27027 Gropello Cairoli (Pavia) Italy
Tel. +39 0382 815150 - Fax +39 0382 814970
CERTIFIED COMPANY
UNI EN ISO 9001-2008
CERT. NR. 9125 - ICON
www.cavel.com
[email protected]