a PDF version of the 2007 catalog

Transcription

Customer Driven Distribution
2007
PRODUCT CATALOG
800 444 7223
www.paceintl.com
TRIPLETT
New
!!!
About Pace
Since 1972 Pace Electronics, Inc. has been your trusted
ROCHESTER, MN
MINNEAPOLIS, MN
PENSACOLA, FL
source for RF distribution products and technical support.
tel 507 288 1853
fax 507 288 1853
tel 763 246 9620
fax 763 542 9665
tel 850 474 3900
fax 850 474 3964
3582 Technology Dr NW
Rochester, MN 55901
2454 Louisiana Ave N
Minneapolis, MN 55427
9900-F Palafox Street
Pensacola, FL 32534
The New,
Improved
Model
1101-A
Our 2007 catalog conveys a much broader product offering
than in past years as well as a new name to better reflect
our company, Pace International.
With our newly opened office in China and our 3 locations in Minnesota & Florida, Pace International is poised to take the lead distributor role in the burgeoning digital marketplace.
Prices and promotions are subject to change without notice. Pace Electronics is not responsible for errors or omissions. Product
DMM
Customer Driven Distribution is our focus asCompact
we integrate technology
and distribution to better
may vary from product pictured. Certain products may not be available at all warehouse locations. Products may also be subject
serve you. As our product and service offerings are larger than our catalog allows, be sure to also
© Pace Electronics Inc. All Rights Reserved.
to back order. Pace Electronics can discontinue any offers it gives without notice.
check out the products on our website at www.paceintl.com
Model 1101-A Specifications
Pace Mission Statement:
DC Voltage
4(200mV to 200V) 0.5% + 2dgt
1(500V) 0.8% + 2dgt
AC Voltage
2(200V & 500V) 1.2% +10dgt
2(2000µA to 20mA) 1.0% +2dgt
1(200mA) 1.2% +2dgt
1(10A) 2.0% +5dgt
FUNCTIONS
DC Current
esistance
Leading, simplifying and supporting the integration of Rhardware
and content solutions within a com-
plex communications marketplace.
FEATURES
3Year
4(200Ω to 200KΩ) 0.8% +2dgt
1(20MΩ) 1.0% +5dgt
Temperature Test (K-type)
Continuity
≤ 70Ω
Diode Check
Warranty
(-40° to 302°F) ±1.0% +3dgt
(303° to 1832°F) ±1.5% +15dgt
▲
▲ 3 1/2 Digit, w/ 1999 max. reading
Contact
a Pace location today and find outTotwhat
we can offer your business!
al Ranges / Functions
▲ Backlit Display
Transistor Check (hFE)
▲
20
▲ AC/DC Voltage to 500V
▲ AC/DC Current to 10A
▲ Temperature Test (Probe Included)
▲ Resistance to 20MΩ
▲ Continuity Test
▲ DiodeVendor
Check
Pace
List
▲ Data Hold
▲ Overload Protection
▲ Double Insulated Case
▲ CAT I and II Rated
▲ Red Rubber Boot w/ Stand
▲ Safety Test Leads w/ Screw-on Alligator Clips
▲ Three Year Warranty
TRIPLETT
Triplett Corporation One Triplett Drive Bluffton, OH 45817
Phone: 800-TRIPLETT Fax: 419-358-7956
www.triplett.com
CAT I 600V (IEC 1010-1)
CAT II 300V (IEC 1010-1)
Ω Ranges
500V AC/DC
SAFETY
Diode Test
500V AC/DC
mA Jack
300mA/250V Fuse
10A Jack
Range Selection
00 *
500V AC/DC
Continuity Beeper
Agency Approval
FEATURES
42
$
230mV DC (500V AC/DC)
Fuses
Unfused
CE
IEC 1010-1 (EN 61010-1)
on Voltage Ranges Only.
See "Overload Protection" above
Manual Range
Digital Display
3 1/2 Digit, 1999 Count
Backlit Display
▲
Data Hold
▲
Auto Polarity
▲
Low Battery Indication
PHYSICAL
Cat. No. 1101
Overload Protection
mV Ranges
Voltage Ranges
(Except mV)
Battery
Dimensions (including boot)
Weight (including boot)
▲
1 - 9 Volt
3.1 x 5.4 x 1.6 in.
0.55 lbs.
* Price is Suggested U.S. List.
All Specifications are PRELIMINARY and are subject to change without notice.
Model 1101-A replaces Model 1101 (Catalog Number remains 1101)
Tradewind is in the process of refreshing its brand
identity. Look for our new logo on upcoming
products and promotions!
Introduction
ABOUT PACE
2
INDEX
4
table of contents
Satellite & Terrestrial
Recievers
Directv MFH-1
L-Band
Amps / multi switches
Satellite meters
6
7-11
12-13
14
15-16
Dishes / lnbs
17
Off-air antennas
18
Headend
Hardline
40-41
Grounding
42-43
Wire Management
44
Wall Plates
45
Surge Protectors
46
Audio / Video
Digital Mixers
48
Amplifiers
49-50
iR Control
51-52
Audio / Video cables
53
Television mounts
54
Tools
Multi Switches / Modulators
20
Combiners
21
Amplifiers
22
Racks / shelves
23
Character Generators
24
Signal Distribution
Hand tools
Ladders / dollies
56-59
60
Power Tools
61-64
Bits / blades
65-67
Screws / anchors
67-68
Insulation / concrete
69
Stapling
70
Fiber optic
26-31
Wire fishing
Cables
32-33
Sealants
73
Connectos
33-35
Lights
74
Connector tools
36-37
Cleaning Tools 75
76
Splitters
38
Safety
Taps
39
Test Equipment
71-72
77-79
AC-Only Power Supply 41
Agile HD Processor 22
Amplifiers
Broadband 14
Distribution 22
L-Band Auto Level 12
MFH-1 10
Off-Air 14
Residential 14
Trunk 12
Antennas
Off-Air 18
Square Shooter 17
Attenuators
Power Passing 11, 39
Audio
Mixer/Amplifiers 48, 49, 50
Network Audio Adapter 50
Auger. See Drill Bits
Batteries/Chargers 62, 63, 64, 73
Bits & Blades 62, 65, 66, 67, 69
Bolts & Fasteners 67, 68
Bosch 63, 64
Brazing Rods 70
Broadband Video Over CAT5E 51
Cable
Audio/Video Patch Cables 53
CAT5E 33
Coax 32, 33
Ground Wire 43
HDMI CL2 Rated Cable 53
Phone Wire 33, 45
Cable/Wire Management
Bushings 37
Cable Ties 44
Staples 37, 44
Cable Caddies 60
Caulking Gun 73
Chisels 58, 59
Circular Saw 64
Circular Saws. See Saws
Combiners 8, 11, 12, 21
Conduit 73
Connectors
Angle 35
BNC 35
Data 44
F-Connectors 33, 34, 35
Hardline 41
RCA 34, 35
Connector Tools
Compression 36, 37
F-Connector Removal Tool 59
Hex 36
Radial Crimping 36
RJ 45 36, 37
Cordless Drills/Screwdrivers 61, 62, 63
Demodulators 21
DeWalt 61
Dinky Link 51
Diplexers 38
Dishes 17
Dollies & Straps 60
Drill Bits 65, 66, 67
Drills 61, 62, 63, 64
Dry wall accessories 68, 70
Dust Pan and Brush 75
Electrical Tape 73
Extension Cords 74
Fasteners. See Bolts & Fasteners
Fiber Optic 26–31
Chasis 27, 28
Connector/Adapter Cleaning Kit 31
Distribution Diagram 26
Enclosure 30, 31
Fiber Splicer 29
Optical Power Meter 31
Optical Splitter 28
Power Accessories 28
Receivers 27
Splice Trays 30
Transmitters 27
File Set 59
FireStop Spray Foam 73
Fishing. See Wire Fishing
Flex Bits. See Drill Bits
Foam Spray Insulation 69
FosFlo 70
Frequency Charts 82
Furniture Pad 75
Grounding Products 42, 43
Hammer Drill 61
Hammers 57
HDMI CL2 Rated Cable 53
Headend 13–18, 23–24
Character Generators 24
Hex Key Set 58
Hilti 69
Hitachi 64
IR Controls 50, 51, 52
Jig Saw. See Saws
L-Band 13
Ladders 60
Levels 57
Lights 74
LNBs 17
Lock Box 43
Maglite 74
Makita 64
Masonry Flexible Drill Bits. See Drill Bits
Measuring Tape 57
Meters
Digital Sound Level 50
Inclinometer 16
Optical Power 31
Satellite 15
Test Equipment 77, 78, 79
MFH-1 7, 7–18, 26, 26–46
Mixer/Amplifier 48, 49
Modulators 12, 20, 21
Power Supply 23
Mud Ring Cover 70
Multi Satellite 7, 8, 9, 10, 11
Customer Devices 10
Master Combiner Unit 8
System in a Box 9
Multiswitches 13, 14, 20
Online Shopping Instructions 80
Phone 45
Wall Plates 45
Pipe Cutter 56
Pliers 56
Power Inserters 11, 13
Power Nailer 69
Power Nails 69
Racks & Accessories 23
Receivers 6
Reciprocating Saws. See Saws
Rotary Hammer 69
RotoZip 64
Safety 75, 76
Satellite 16
Dishes 17
Saw Blades 62
Saws
Circular 61, 63, 64
Hand Saws 56
Jig Saw 63
Reciprocating 61, 63
Screw Drivers 58, 61, 63
Screws 68
Sealants 73
Security Products 43
Sharpie 73
Shoe Covers 75
Shop Vacs 75
Soldering 70, 74, 75
Splitters
1 GHz 38
2 GHz 38
Hardline 40
Wide Band 10
Stacker/Destacker
Micro Stacker 12
Staple Guns 70
Staples 44, 70
Strippers 36, 37
Stud Punch Tool 59
Surge Protector 46
Tape Measure 57
Taps
1 GHz 39
2 GHz 39
Directional Couplers 39
Hardline 40
Connectors 41
Directional Couplers 40
Splitters 40
Telephone. See Phone
Television Mounts 53, 54
Terminators 34
Terms and Conditions 81
Test Equipment. See Meters
Pocket Toner 37
Tone Generators 11
Tool Boxes & Bags 58
Torch 74
Triplett 77
Wall Plates 45
Wire. See Cable
Wire Fishing 71, 72
Wrenches 58
SATELLITE &
TERRESTRIAL
Recievers
Directv MFH-1
L-Band
Amps / multi switches
Satellite meters
6
7-11
12-13
14
15-16
Dishes / lnbs
17
Off-air antennas
18
Satellite &
Terrestrial
Receivers
DIRECTV® Receiver
d-11
Call for Pricing
4 Two sets of audio/video outputs
DIRECTV® Plus HD DVR
hr-20
4 S-Video output
Call for Pricing
4 Record one high-definition program while watching another (up to two shows at once)
4 RF in/out connectors
4 Pause and rewind live high-definition TV, use instant replay and watch in slow motion
4 Phone jack connector
4 Interactive TV enabled
4 On-screen Caller-ID
4 1080i picture output resolution formats
4 Dolby® Digital 5.1 Surround Sound Capable
DIRECTV® DVR
r15
Call for Pricing
The DIRECTV® DVR lets you easily and automatically record your favorite shows and watch them on
your schedule
4 Digital Recording (up to 70 hrs.)
DIRECTV® HD Receiver
h20
Call for Pricing
4 Picture clarity up to 1080i picture resolution for crystal-clear, vibrant colors and wider images
4 Dual Tuners (lets you record two things at once)
4 Crisp digital sound
4 Parental Controls
4 Multiple screen formats full screen, stretched, letter box, pillar box and zoom
4 Advanced Technology High-Definition Multimedia Interface (HDMI)
4 Superior connectivity
4 On-Screen caller ID view and log caller ID information provided by your local phone company
800 444 7223 | www.paceintl.com
Satellite &
Terrestrial
multiple satellites
+
off-air antenna
=
ONE WIRE
inernet
2
DIRECTV® MFH-1
Multi Satellite
DIRECTV MFH-1
+
3
1
5
One Wire, Multi-Family
Residential Installation
4
6
(To view our fiber optic system design turn to
page 26 in Distribution Section.)
7
1. SATELLITE ANTENNA:
7. NAS MASTER STACKER
Multiple signals are received into LNB’s and transmitted into the
The Master Conversion Unit (MCU) device stacks DIRECTV
MFH1 System.
satellite bands and terrestrial UHF/VHF band into a single wide-
2. MODEM DISTRIBUTION DATA TERMINATION SYSTEM
band signal for MDU distribution.
Add an internet connection to the MFH1 System to provide in-
8. NAS ACTIVE ULTRA WIDE BAND SPLITER
ternet access to your customers.
Splits terrestrial and satellite signals for distribution.
3. PLATINUM SERIES UHF/UV ANTENNA
9. NAS MFH1 MULTI-SATELLITE CUSTOMER DEVICE
Add Off-Air or MATV channels into the one wire solution.
De-stack and down-convert the DIRECTV® Satellite signals for
4. MULTI-CHANNEL PROGRAMMABLE FILTER AMPLIFIER
delivery to the DIRECTV IRD.
Balance digital & Analog off-air singals
10. DIRECTV® HD RECEIVER
5. NAS SIX POINT POWER INSERTER
NAS Customer Devices can have up to 4 outlets. Simply hook
Regulate voltage for powering and locking polarity of LNB's
up a DIRECTV® receiver or cable modem to receive TV or in-
6. NAS IN-LINE TRUNK AMPLIFIER
ternet.
8
10
9
10
Adjustable Line Amplifiers for boosting the satellite signals
Satellite &
Terrestrial
DIRECTV MFH-1
Single Family Residential Installation
Active 2-way Ultra Wide Band Converter
scu-4p5matw
Call for Pricing
4 Only one Master Combiner Unit (MCU) may be required
to service a medium size Multi-Dwelling Unit (MDU)
property
4 For large High rise and Garden Style MDU properties
the MCU can be cascaded
4 MCU supports power supply redundancy with other
MCU’s to sustain partial power outage
4 Built-in LED input level indicators
4 Automatic Gain Control (AGC) on each satellite input
4 7 inputs and 7 outputs
Satellite &
Terrestrial
DIRECTV MFH-1
MFH-1 System in a Box
Single wire distribution system for Multiple Satellites
and Multiple Antenna Systems
Finally, a turn key RF distribution system that
delivers stacked signals onto one wire while
remaining small and easy to install.
MFH-1 System in a Box
NASDISTRO1
Call for Pricing
4 MFH-1 Single wire solution for DIRECTV serves up to
256 DIRECTV receivers (depending on property layout)
4 Small 26" × 26" × 8" foot print
4 Reduced Labor and installation costs. Plug and play!
4 Balances off-air signals for the best viewing experience
4 HDTV, DVR and Internet capable
4 Custom ventilated enclosure protects your signals from
prying fingers and signal theft
4 Each system fully tested and certified
To learn more and customize your own solution, call
our expert sales staff or visit us online.
Satellite &
Terrestrial
DIRECTV MFH-1
Satellite Power Amplifier
Passive Ultra Wide Band Satellite 8-way Splitter
Call for Pricing
spa-1u
4 Wide-band frequency response
4 Sloped Gain Compensation
4 Low power consumption
4 6 Inputs: VHF Low+FM / VHF High / VHF-UHF and 3
UHF units split over 10 UHF programmable clusters
4 Each cluster can have 1 to 7 channels bandwidth
4 Easy programming by using one rotary / push button
viewed on 2 digits display and LEDs for each cluster and
each input
4 Automatic leveling of signal or manual with 30 dB
attenuator with 1 dB step for accurate equalization
uhfs-4p
Call for Pricing
uhfs-8p
Call for Pricing
4 Passes DC power from each output to input port up to 500 mA
Call for Pricing
4 Designed for both digital and analog channels
Call for Pricing
4 Wide-band power splitters for VHF/UHF and Satellite bands
up to 3550 Mhz
Multi Channel Programmable Filter Amplifier
Pfa-6600
uhfs-2p
4 High isolation of reflected signals
2-way Wide Band Splitter
Call for Pricing
SS14-02
4 For splitting terrestrial and satellite signals 2-way for signal
distribution
4 500mA DC passing from any output to input
4 Diode steered protection
4 Grounding port provided
4 Frequency range 5 -2150 MHz
scd-4p54w
4 Selectable remote power on VHF-UHF inputs
MFH1 Multi Satellite Customer Devices
lmx-42
lmx-82
sa-6a
10
Call for Pricing
Call for Pricing
scd-4p52w Call for Pricing
4 (Single In. Dual IRD Outs) in non 72.5º W markets
Active Ultra Wide Band Splitter
Inline Trunk Amplifier
scd-4p5w
lmx-2r
2-way, return path
Call for Pricing
lmx-42r
4 way, return path
Call for Pricing
lmx-82r
8-way, return path
Call for Pricing
scd-4p54w
4 (Single In. Quad IRD Outs) in non 72.5º W markets
MFH1 Multi Satellite Customer Devices are designed to be installer
friendly. They operate with all legacy and new production DIRECTV
receivers. They are powered by DIRECTV receiver or with optional
external power supply. Other features include:
4 Built-in DIRECTV Multi-switch
4 6 Inputs, 6 Outputs
4 Ultra wide-band active splitters covering VHF/UHF and
Satellite bands up to 3550 Mhz
4 Frequency range; 250 - 2150 MHz
4 Supporting Broadband Return Path
4 Low Noise Figure
4 Passes DC power from each output to input port
4 Enables two-way broadband services
4 Wide Dynamic Range
4 Provides high isolation of reflected signals
4 High isolation between outputs
Call for Pricing
Satellite &
Terrestrial
vr-9615
Power Inserter
12V
Call for Pricing
VHF+UHF / Satellite Combiner
pi-4a
4 - way
Call for Pricing
pi-6s
6 - way
Call for Pricing
4 For powering LNB and active components
4 Low insertion loss (< 1dB)
4 For combining two signals with different frequencies into a
common wire
4 Low insertion loss
Voltage Block Coupler
4 Frequency range 950–2150 MHz
4 40–2150 MHz frequency range
Call for Pricing
Power Passing Fixed Attenuators
Call for Pricing
ssc-1
4 Low insertion loss (< 1dB)
common wire
4 40–2150 MHz frequency range
4 For powering LNB and active components
Call for Pricing
vbc-t
Combiner for SAT-C LNB
Single Way Power Inserter
PI-9602
Call for Pricing
std-9501
Pp02a-03
3 dB
Call for Pricing
pp02a-06
6 dB
Call for Pricing
pp02a-09
10 dB
Call for Pricing
pp02a-12
12 dB
Call for Pricing
pp02a-16
16 dB
Call for Pricing
pp02a-20
20 dB
Call for Pricing
4 Frequency range 5 - 2150 MHz
4 Return loss >20 dB
Tone Generator, 22 kHz
Call for Pricing
TG-9411
VHF+UHF/Satellite Ultra Wide Band Combiner
swtd-2
swtd-3
Return Path
Call for Pricing
4 To use with satellite equipment without 22 kHz tone in multisatellite applications
Call for Pricing
4 Frequency range 250 - 2150 MHz
common wire
4 Frequency range 950–3550 MHz
11
DIRECTV MFH-1
Voltage Regulator
Satellite &
Terrestrial
L-Band
Tradewind™ RF Modulator
$ 13.95
pvsm3/4s
Tradewind™ Dual
satellite IF Trunk Amplifier
$ 79.00
tw-4300
The TW-4300 is a dual LNB launch amplifier. It works as equally well
in 950 to 1450MHz dual distribution systems as it does in dual wideband (950 to 2150MHz) systems. Single wide-band signals may be
split to feed both halves of the amplifier. Each amplifier output can
work independently from each other to provide a 30db max gain.
Power may enter the amplifier from any “F” port. TW-4300 includes
an external DC plug-in supply to power the amp locally.
Pass Band:
950-2150MHz
Gain:
30dB MIN
950-215MHz
Flatness:
0.5dB MAX
950-2150Mz
Return Loss (Input):
15dB MIN
950-2150Mz
15dB MIN
950-2150Mz
Noise Figure:
8dB MAX
950-2150Mz
Input Capability:
92dB uV
At 1.45GHz
(Output):
(1dB Compression)
Isolation (between
Tradewind™ L-Band Auto Level Amplifier
tw-ala-1
$ 99.00
tw-ala-5
$ 99.00
tw-ala-10
$ 99.00
The TW-ALA-1 amplifiers process DBS transponders for distribution
over coaxial cable lines. The automatic level control circuitry provides
a constant output over a 20 dB input range. The input range also
compensates for installation variables such as tap values and cable
distances. The output level works well in amplifier cascades. Gain
is complemented with 10 dB of slope compensation. Each TW-ALA
model includes a power supply. The ON/OFF switch controls the
LNB power from RF input port. The LED indicates the LNB to be
powered from RF input. Diode steered powering allows the amp to
be powered from the power connector or either input or output
“F” connector.
Designed to convert separate audio and video signals (from a video
camera, computer, portable VCR or satellite receiver) into VHF TV
signals that you can view on a TV set. Great for TVs without composite inputs.
sc-3
sc-4
Tru Spec® Signal Combiners
sc-3
$ 7.34
Channel 3
4 Combines two like signals onto channel 3
sc-4
$ 7.34
Channel 4
4 Combines two like signals onto channel 4
Input
35dB MIN
Amps)
Operating Voltage
12-18VDC
Operating Current
220 mA
22KHz diseq
blocking high
950-2150MHz
Micro Stacker
$ 135.00
US575-t
4 Used for stacking 101, 110 and 119 satellites
Tradewind™ Digital Audio/Video Modulator
mod1
$ 19.95
impedance
4 Microprocessor controlled PLL agile modulator
Impedance
75 Ohm
4 20 dBmV minimum output
Operating temperature
-20° C ~ +50° C
Power Adaptor
120VAC/60Hz input
4 Covers CATV channels 65-139 and broadcast Channels
14 to 83
15VDC/400mA
output
12
Sonora Dual Receiver D-Stacker Box
$ 153.00
d575d
4 Front panel mode button for easy selection of TV/CATV
channels
Satellite &
Terrestrial
L-Band and Local Distribution Box
L-Band
Tradewind™ LDB Series Distribution Boxes
The Pace LDB Series distribution boxes enable the integration of
analog (MATV or Off-Air) with digital satellite (L-band or Stacked
DBS) into a single coax cable.
ldb8
Call for Pricing
ldb12
Call for Pricing
ldb16
Call for Pricing
ldb24
Call for Pricing
ldb8D
Dual L-Band
Call for Pricing
ldb12D
Dual L-Band
Call for Pricing
ldb16D
Dual L-Band
Call for Pricing
ldb24D
Dual L-Band
Call for Pricing
Tradewind LDB Series distribution boxes enable the integration of
analog (MATV or Off-Air) with digital satellite (L-band or Stacked
DBS) into a single coax cable. All outputs are good for 200 feet over
RG6 coax, and a 4-way splitter at the end of the coax run. Analog
signal loss is approximately 35 dB including the 4-way splitter at the
end of the run. A Dual LDB allows to distribute two separate L-Band
signals from the same box. An LDB-24D will have 12 dual outputs
which can be split 4 ways each for a total of 48 receivers. Two Dual
LDBs can be used side by side to distribute 4 L-Band lines as is the
case with 3 phase satellites.
4 15 to 2050 MHz
An Automatic DBS Level Controller amplifier allows for a consistent
output level over a wide input range. All outputs are good for 200
feet over RG6 coax, and a 4-way splitter at the end of the coax run.
Preamplifier is recommended for the off air antennas.
Pace LDB Boxes are excellent for apartments, condos, office
buildings and other commercial applications to make every outlet
DIRECTV ready. They are a convenient, centralized solution to power
all your units.
Sonora® Destacker
d575
$ 70.00
4 Essential for TIVO programming in a stacked environment
4 Allows an older receiver to work with stacked technology
Channel Master Power Inserter
8002IFD
$ 24.81
8004ifd
$ 34.10
4 13 and 18V includes Model 8014IFD Power Supply
4 Stacked DBS and analog input
4 Accommodates a 4-way splitter
Tradewind™ Dual Power Inserter
P4518
Inputs
$ 19.00
4 13/18v or 18/18v switchable
Number of Outputs
DIRECTV®
APPROVED!
8
12
16
24
Stacked DBS
LDB8
LDB12
LDB16
LDB24
Dual L-Band
LDB8D
LDB12D
LDB16D
LDB24D
Zinwell® 3x4 Multiswitch
SAM-3402
$ 10.00
13
Satellite &
Terrestrial
Amps/Multi Switches
DIRECTV®
APPROVED!
DIRECTV®
APPROVED!
Zinwell® 6x16 Multi Switch
Zinwell® 4x8 Multi Switch
$ 43.00
sam-4803
$ 190.00
wb616
4 Wide-band 6x16 Multi-Switch for Ka/Ku Dish Antenna
4 Supports DIRECTV wide-band Ka/Ku dish antenna which has
a 250-2150 MHz output capacity
4 Also compatible with all other DIRECTV dish antennas
4 Supports 16 independently-operating satellite receivers or
more when cascaded
Tradewind™ 5x8 Multi Switch
TWI5X8
22Khz tone
Tradewind™ Broadband Distribution Amplifier
PBIDA-30-860
860 MHZ
$ 230.00
The PBIDA-30-860 is a professional quality, broadband, two-way
capable, indoor hybrid distribution amplifier.
4 Dual push pull hybrid modules
4 Interstage variable gain and slope controls, which are
located on the top of the unit for easy access
$ 57.50
4 22 KHz tone
4 Input and output test ports
4 5 inputs and 8 outputs
4 Each LNB can be powered via the multi switch by using
power adaptor connected to the multi switch
4 Each satellite receiver connected can select programs either
in Vertical or Horizontal polarity
4 13V/18V and 22 KHz ON/OFF
DIRECTV®
APPROVED!
4 This unit has a large heat sink for superior heat dissipation
Pre Amps
AP-8700
19 dB UHF/17 dB VHF Pre Amp
$ 56.06
AP-2870
Dual Input Pre Amp
$ 53.02
AP-3800
Pre Amp 29dB VHF; UHF By-pass
$ 35.68
AP-4800
Pre Amp VHF By-pass 28dB UHF
$ 54.58
Tru Spec® 15 dB Amplifier
AP-8275
Pre Amp 29dB VHF 28dB UHF
$ 74.70
ta-15
AP-8780
Pre Amp 17dB VHF 28dB UHF
$ 67.07
UHF/VHF
$ 13.50
Zinwell® 6x8 Passive Wide Band Multi Switch MA
wb68
$ 60.00
TA-36
Designed to interface with 99°/101°/103°/110°/119° DIRECTV
satellites. To be used with DIRECTV AT9 Ka/Ku satellite dish for
MPEG-4 compression HD compatible receivers.
4 In conjunction with a BBC Module (B Band Convertor Module, Zinwell part # SUP-2400), WB68 supports a DIRECTV
Ka/Ku MPEG-4 capable HD satellite receiver
Mini Amplifier
vsma-10-1000
$ 19.00
4 Compatible with all other DIRECTV satellite receivers (BBC
Module not required)
vsma-20-1000
$ 29.00
4 Powered by connected satellite receivers
4 Wide band frequency multiswitch: 250-750 Mhz, 950-1450
Mhz, 1650-2150 Mhz
14
Tru Spec® 25 dB & 36 dB Amplifier
vsa10/10-1000-2
vsav10-1000-2wz
10dB 1G Amp Active Return
$ 33.00
10dB Passive Reverse
$ 30.00
ta-25
UHF/VHF
$ 16.75
ta-36
UHF/VHF Amp
$ 73.00
Outdoor Transformer
ob-3
$ .50
Satellite &
Terrestrial
Satellite Meters
Channel Master® Satellite Signal level Meters
$ 56.81
1004IFD
sat-buddy
sat-buddy2
Dual-buddy
SAT Buddy
sat-buddy
Super Buddy - Satellite Signal Level Meter
$ 103.87
1007IFD
4 Rugged Weather-resistant Metal Enclosure
$ 679.00
super-buddy
$ 165.00
4 Neoprene Case Included
4 ID the satellite by“align-to-lock” or “automatic scan”
4 Strong Internal Rechargeable Battery (Nimh)
4 Positive ID multi-lock algorithm eliminates false positives
4 Bright Led Display , Easy To Read Even In Direct Daylight
4 Field replaceable connectors
4 Audible Tone, Allowing Dish Alignment By Sound
4 Rugged durable aluminum case with rubber shock guards
4 Geo-sensitive “Field Guide” software stores all satellites
and transponders per region
4 Controls multi-LNBs/switches with 22kHz/DiSEqC
4 Displays cross-pole value from DIRECWAY modems
4 Audible tone for signal lock and peak
4 Quick charge battery with universal AC or vehicle 12 VDC
Includes Carrying Case
$ 149.56
The Channel Master 1004IFS, 1007IFD and 1008IFD are intended to
aid in the alignment of a satellite dish. They include satellite IF (9502159MHz) amplification and a broadband detector. The detector
drives a meter and variable frequency audio tone. The dish is then
aligned for maximum meter deflection or highest pitch tone. A gain
control allows a wide range of input signal levels.
The units are connected to the LNB via a short coaxial cable. The
1004IFD output must be connected to the satellite receiver in order
to supply power. The units operate from 11-24 VDC on the coaxial
cable. Connection to the receiver is optional with the 1007IFD and
1008IFD but extends battery life between charges. All models allow
measurement of voltage on the coaxial cable. The 1007IFD and
1008IFD will also measure LNB current. The 1007IFD and 1008IFD
include an internal rechargeable nicad battery pack, carrying strap
and a wall plug recharging unit.
sat-buddy2
$ 200.00
4 Rugged weather-resistant metal enclosure
4 Easy to use single function front panel buttons
1008IFD
SAT Buddy 2
4 Neoprene case included
4 Strong internal rechargeable battery (nimh)
4 Bright led display , easy to read even in direct daylight
4 Audible tone, allowing dish alignment by sound
4 22khz/diseqc tone for multi-LNB switch control
Dual Buddy
dual-buddy
4 Rugged weather-resistant metal enclosure
Satellite Finder Meter
$ 12.95
SF-99
4 Works with all brands of satellite dishes and receivers
4 Analog meter display for easier readouts
4 Frequency range: 950Mhz to 2050Mhz
4 LED indicator for left hand (18V) or right hand (13V)
polarization
4 Powered by satellite receiver
$ 275.00
4 Neoprene case included
4 Strong internal rechargeable battery (nimh)
4 Bright led display , easy to read even in direct daylight
4 Audible tone, allowing dish alignment by sound
4 22khz/diseqc tone for multi-LNB switch control
4 DSB (Dual Signal Balance) For Balancing Two Signal Inputs
15
Satellite &
Terrestrial
Satellite Meters
Satellite Meter
dg3pro
$ 95.00
4 Satellite tracking meter with self-contained battery
4 Includes vehicle cord, wall charger, leather case and one 6'
jumper
Satellite Signal Meter
sat9520
$ 1,195.00
4 LCD display with full text graphics
4 Pitch tone on audio speaker
4 Identifies Satellites
4 22khz/diseqc tone for Controlling LNB's and multiswitches
4 Tunable to individual transponder frequencies
Scanning RF Signal Level and CLI Meters
dispmax800
4 Standard 950-1450 or stacked 950-2150 MHz
$ 1,195.00
4 Strong, fast charge, internal battery able to power multiswitches and high current LNB's
4 Calibrated leakage detector
4 Interfaces to computer for future software upgrades
4 Meets FCC recording requirements using a calibrated
dipole
4 Rugged, weather-resistant enclosure with padded case
4 Search mode quickly finds leaks
4 Unique circuitry rejects most false leaks. Audio detects other
manufacturers’ tags
4 Audible tone for dish alignment
4 This is Applied's finest satellite meter
4 Ingress analysis: Automatically searches reverse band for
ingress
4 Peak hold function catches intermittent problems
4 Digital Channel Measuremen
4 Check average power of digital channels
4 View flatness across the entire channel. Measures QAM and
QPSK
Inclinometer
PVc0maf
$ 159.00
The Suunto Tandem is a liquid-filled precision compass and inclinometer in one compact aluminum housing. This instrument is an
excellent tool for surveyors, engineers, cartographers, geologists,
miners, architects and for anyone who needs to be able to measure
directional indications, heights, vertical angles and slopes - with
speed and accuracy.
4 Pass Fail installation check
4 Check your entire system or just your favorite channels
4 On screen report summarizes results
Satellite Signal Meter
birddog
4 Data recordin
$ 499.99
4 Rugged Weather-resistant Metal Enclosure
4 Neoprene Case Included
4 Strong Internal Rechargeable Battery (Nimh)
4 Bright Led Display , Easy To Read Even In Direct Daylight
4 Audible Tone, Allowing Dish Alignment By Sound
16
4 One button recording makes documentation easy
4 Automatically performs 24 hour FCC testing
4 Download direct to printer or to a computer
Compass with Lanyard
4 Automatic calibration
tccpm
$ 4.99
4 On board noise source provides precision calibration
4 Durable hand held compass with rotating bezel and lanyard
4 Accuracy is guaranteed over time and temperature at all
frequencies and power levels
4 If you don’t have a satellite meter, a good quality compass
will help align a satellite dish quickly and easily
Satellite &
Terrestrial
DIRECTV®
APPROVED!
WS-LNB
SF2-d3
Stacked LNB
$ 107.22
ws-lnb
Dual LNB
Brace sold
separately
$ 24.00
wg18acd DIRECTV 5 LNB Ku/Ka Dish Antenna
$ 80.00
Au9s
Longbrace
$ 7.50
Shortbrace for wall mount
$ 7.50
dtvlongbrace
dtva3brace
4 DIRECTV: 101
4 For MPEG-4 Compression for HD Prog
4 DIRECTV: 99, 101, 103, 110, 119
Winegard® Square Shooter Off Air Antenna
Winegard® One Meter Winegard Dish
DIRECTV
APPROVED!
®
$ 15.00
sf2-d3
Winegard® 18" Dish Dual LNB Single Pack
$ 76.82
ds-3100 $ 101.50
ss-1000
SS-2000 Amplified
$ 120.24
4 Avg. beamwidth: 61°
4 Avg. VSWR across band: 1.3:1
4 Avg. Front to back: 13 dB
4 Maximum width housing: 16" x 16" x 4"
Winegard® 3 Phase Multi Sat Dish
kt1820blx
$ 52.00
4 DIRECTV: 101, 110, 119
DIRECTV®
APPROVED!
Winegard® 30" Dish With RCA Style Feed
ds-2078
$ 38.03
ds-4062
$ 29.49
Residential Non-Pen Roof Mount
$ 25.00
CH-mount
Tripod
36" International Dish
66e For more info
on residential and
commercial mounts
call or vist us
online!
$ 80.00
Sat C Kit for 110 degree Satellite
$ 24.99
SATC-KIT
4 DIRECTV: 72.5
TRt36
3 ft.
$ 19.95
TRT60
5 ft.
$ 36.00
17
Dishes / LNBs
DIRECTV®
APPROVED!
Satellite &
Terrestrial
Winegard® Platinum Series UHF Antenna
Off-Air Antennas
hd-9095
Winegard® Platinum Series UHF/VHF Antenna
$ 80.89
$ 97.05
hd-7082
Winegard® Platinum Series UHF/VHF Antenna
$ 123.36
hd-7084
4 93" Fringe UHF
4 110" Near Fringe Range
4 Winegard® 131" Fringe Range
4 45 Miles UHF
4 35 Miles UHF 50 Miles VHF/FM
4 Active Elements: 3 9
4 VHF/UHF
4 Active Elements: 6 8
4 Boom Length: 9 5 “
4 Active elements: 50
4 UHF Elements: 4 0
4 Turning Radius: 92.75"
4 UHF elements: 32
4 VHF Elements: 2 8
4 Maximum Width: 7 “
4 VHF elements: 18
4 Boom Length: 131"
4 Vertical Height: 31.75"
4 Boom length: 110.5"
4 Turning Radius: 8 1"
4 Element Diameter: 3/8"
4 Turning radius: 70.6"
4 Maximum Width: 110"
4 Maximum width: 110"
4 Vertical height: 19.3"
4 Element Diameter: 3 / 8 “
4 Element diameter: 3/8"
Metro UHF/VHF Antenna
pr-5646
$ 41.12
4 Suburban Range
Winegard® FM Antenna
pr-6010
20 mi. FM
4 Active Elements: 2
4 Boom Length: 10"
4 Boom Length: 66.5"
4 Turning Radius: 41"
4 Vertical Height: 10"
$ 24.98
4-Bay Bow-tie UHF Antenna
pr-4400
300 OHm
$ 25.77
4 Channels 14 through 69
High Definition UHF Antenna
High Definition UHF Antenna
hd-9065
18
$ 47.16
8-Bay Bow-tie UHF Antenna
$ 70.21
hd-9085
4 Boom Length: 50"
4 Boom Length: 74.75"
4 Turning Radius: 73"
pr-8800
300 OHm
4 Channels 14 through 69
$ 60.71
HEADEND
Multi Switches / Modulators
20
Combiners
21
Amplifiers
22
Racks / shelves
23
Character Generators
24
headend
Tradewind™ Mini Modulator
pmm*
Tradewind™ 2x8 Port Rack Mounted Multi Switch
$ 79.00
PMSR-208
Multi Switches/Mods
The PMSR-208 is a 14V/18V satellite multi-switch used in all applications that require satellite IF distribution from 950-2150 MHz. It
will allow the user to take two LNB outputs and provide inputs to a
maximum of 8 receivers. The PMSR-208 routes any of the inputs to
any of the outputs by utilizing the 14V/18V switching control from
the satellite receivers. The PMSR-208 provides an excellent way to
simplify any SMATV installation.
4 Combines TV input with satellite input
$ 180.00
TWI5X16 This multi switch has one input designed for off-air signals. It will allow user to take two LNB outputs and provide input to a maximum of
sixteen receivers. It routs any of the input to any outputs by utilizing
the 14V/18V switching control from the satellite receivers. It provides
an excellent way to simplify any SMATV installation.
4 Built-in 22 KHz tone generator
4 Provides RHCP and LHCP switching for 16 receivers
4 AC power supplies power to LNB’S
4 Ideal for smaller systems
4 Combiners TV input with satellite output
4 Input selected by 14V/18V from satellite receiver
employing right and left hand circular polarization
4 Input selected by 14V/18V and 22KHz from satellite receiver employing right and left hand circular polarization
4 Power adapter supplies power to LNB’s
4 3 year limited warranty
$ 89.00
Professional quality channelized heterodyne audio/video modulator
with SAW filter for adjacent channel capability. The PLL oscillator
with micro-processor can control the output frequency to meet FCC
required accuracy and off-setting.
4 Die cast housing
4 SAW Filtered for superior vestigial side
band shaping and harmonic reduction
4 Microprocessor controlled frequency
setting meet all FCC accuracy and off
setting requirement
4 Upgrade to stereo with an optional stereo
encoder card (PMM-SEC)
4 Channel can be reset within its band resetting
dip switch and output filter only
4 Pre-emphasis defeat switch accessible from side panel for
the insertion of composite BTSC stereo signal
4 Channels 2-92, listed on the front and rear
4 41 dBmV output
Tradewind™ Agile Micro Mod
$ 229.00
pamm
PMSR-216
$ 135.00
Require ssatellite IF distribution from 950-2150 MHz. It will allow
users to take two LNB outputs and provide input to a maximum of
sixteen receivers. It routes any of the input to any outputs by utilizing
the 14/18V switching control from the satellite receivers. PMSR-216 is
an excellent way to simplify any SMATV installation.
4 Power adaptor supplies power to LNBs
4 Input selected by 14/18V from satellite receiver employing
right and left handcircular polarization
4 Built-in amplifier to comensate for insertion loss
20
Agile micro mod in die cast housing. The double conversion and
superior SAW filtering provides adjacent channel compatibility
and spurious free output. It provides 45 dB output level from 50 to
864 MHz including CATV and TV frequencies. The channelization
configuration can be changed by the up/down buttons located on
the front panel.
4 Double heterodyne conversion
4 Automatic band splitting filters for
superior carrier to noise ratio
4 Supports TV, CATV, frequency and lock
function
Tradewind™ Stereo Encoder Card
pmm-sec2
$ 75.00
Stereo encoder card enables stereo in Tradewind mini mods. It accepts the left and right audio to generate a composite NTSC format
stereo signal to be connected o the audio input of Tradewind mini
rack modulator.
4 FCC frequency offset with automatic
setting
4 Enables stereo in Tradewind™ mini mods
4 Pre-emphasis defeat switch accessible from side panel for
4 Compatible to current mini rack size and power
supply
4 The insertion of composite BTSC stereo signal
4 LED readout of channel on front display
4 Good stereo separation, more then 20 dB
headend
Tradewind™ Full Size Modulator
prm55-*
$ 65.00
4 55 dBmV
4 Support HRC, IRC frequency offsets
pad-806
$ 99.00
Agile micro demodulator for off-air channels. Extracts composite
video from RF. PAD-806 is a high quality agile demodulator for any
TV/CATV channel in the range 54 to 806 MHz. The channel display
at front panel can sow the channel selected by the up/down buttons
on the front panel.
4 Digital tuner controls
4 Microprocessor controlled to demodulate any TV/CATV
channel within 54 to 806 MHz including HRC/IRC off setting
4 Low power consumption
4 Output capability to 860 MHz
4 Channel can be easily selected by the buttons on the front
panel
4 Front panel -30 dB test point
Tradewind™ Passive Combiners
pPc-12g
12 Port
$ 40.00
pPc-24g
24 Port
$ 60.00
19” rack mounted quality combiners employ directional coupler
design principals to obtain high isolation between input ports. They
provide a convenient method to combine the outputs of modulators,
strip amplifiers and processors.
4 Directional coupler design
4 High isolation
4 Test point in front panel
Tradewind™ Full Size FM Stereo Modulator
pafm
$ 120.00
FM stereo modulator with switchable mono or stereo capability.
Designed especially for commercial installation, the PAFM provides
superior signal-to-noise ratio, separation and enhanced dynamic
range. The employment of a phase locked loop tuning circuit insures
that the selected station will not drift. Switchable mono or stereo
capability allows for FM transmission versatility.
4 Frequency agile
Tradewind™ Full Size Agile Demodulator
$ 99.00
prd-806
Allows for adjacent channel operation from Master Video for broadcast or CATV channels from 50 to 800 MHz. Demodulates VHF, UHF
and cable channels from 54 to 806 MHz. The unit accepts any NTSC
television signal in the 54 to 806 MHz frequency range and converts
it to base band video and audio. Three additional outputs are provided as well as the IF output to monitor the status of the tuner.
4 SAW filter for superior vestigial sideband response
4 Stereo or mono operation
4 Keyed AGC system for excellent picture stability
4 Adjustable audio modulation and RF output level controls
4 Available in NTSC formats
4 Envelope detection ensures exceptional differential gain
and phase
4 Power On Front Panel Indicator
4 Composite (MPX) stereo output for BTSC application
4 4.5 MHz and MPX subscriber output for BTSC application
4 Quadrature single tuned audio detection
4 45.75 MHz IF monitor
Tradewind™ 16 Ch. Active Combiner
pac-16u
19" Rack Mount
$ 129.00
19” rack mounted 16 channel active combiner. Combines RF modulated channels into one cable. The 40 dB minimum port-to-port isolation ensures combining without the potential of channel interaction.
4 19” rack mount
4 16 inputs
4 High isolation
4 AC convenience outlet
21
Combiners
Full size modulator built with SAW filter. The PLL oscillator set by
jumper enables the oscillator to be set to any required frequency for
output channels from 54 to 860 MHz. The filtered output amplifier
can filter out unwanted spurious to provide harmonic performance
for both inside or outside the band of the tuned channel.
4 Channels 2-36
Tradewind™Agile Micro Demodulator
headend
Tradewind™ Distribution Amplifier
pda-52
$ 139.00
Amplifiers
The PDA-52 MATV launch amplifier provides a high 52 dB gain
output with extremely low noise and distortion. High reliability and
rugged design make this amplifier ideal for medium to large MATV
systems. The PDA-52 provides dual switchable input attenuators that
protect the amplifier input from overdrive distortion by reducing the
input signal level before the first amplifier stage. Front panel accessible controls provide optimum signal level adjustment. The internal
band-split multiplexer accommodates separate UHF and VHF
low/high band inputs, thereby reducing first stage amplifier channel
loading improving distortion performance and ensuring the highest
level of picture quality. Alternately, combined VHF and UHF signals
from a broadband antenna can be inserted into the VHF input. The
PDA-52 is equipped with a switchable FM (88-108 MHz) trap, which
employs high-quality filters to remove strong local radio stations that
cause picture distortion. Its wide bandwidth ideally suits the PDA-52
for use in MATV apartment distribution systems.
4 3 independently adjusted band, gain and slope controls
Tradewind™ Agile HD Processor
Tradewind™ Single Channel Amplifier
$ 79.00
psca-fm
Rack mounted FM band amplifier designed cover all VHF band
frequencies. Automatic gain control is provided to set the output
power independent of the input level. Externally adjustable input
and output filter controls allow easy re-tuning of any amplifier within
band type for special alignment applications, or repair replacement.
A precision voltage regulator eliminates performance changes due
to loading or power line fluctuations.
4 Adjustable RF Gain Port and the Test Port located on the
front panel
4 Adjustable sound trap
4 Input and output test points
4 AC convenience outlet
PAP-860 is a frequency agile, microprocessor controlled, heterodyne
signal processor which uses the latest low noise, PLL, SAW filter and
AGC techniques to provide superior quality and performance at
an attractive low price. The unit has been specifically designed to
produce the highest quality pictures at extremely low inputs while
maintaining stable output levels with its sync tip AGC circuit. High
input capability and SAW filtering provide the unit with the ability
to process a single cable channel even in the presence of adjacent
channel. High frequency and extremely high accuracy phase locked
loop oscillators allow the unit to meet the frequency offset, even
under worst case conversions to hyper band output channels.
4 For off-air channels
4 Microprocessor controlled
4 Lightning and line voltage surge protection
4 SAW filtered
4 Adjacent channel rejection of 60 dB
4 Superior low noise
4 68-Channel range 54-806MHz (TV off-air 2-69)
4 Sync tip AGC for precise signal regulation
4 Not for CATV Channels 37-43
4 BTSC stereo signal compatible
4 52dB high gain typical, provides excellent carrier-to-noise
performance for superior picture quality
4 45.75 MHz IF loop-thru
4 Output capability to 550 MHz
4 Stand by carrier generator
4 3 independently adjustable band, gain, and slope controls
4 (VHF-low, VHF-high, UHF) for optimal carrier-to-noise ratio
and easy system balancing
4 Dual switchable input attenuators eliminate overloading and
reduce harmonic distortion preserving picture quality
4 Convenient front access switchable FM trap filter
eliminates high level local FM radio stations reducing harmonic distortion
4 -20dB output test point enables simplified setup an performance monitoring without service interruption
Tradewind™ Rack Mounted Distribution Amplifiers
PCA-30RK550
30 dB
$ 129.95
PCA-45RK550
45 dB
$ 149.95
30 and 45 dB rack mounted distribution amplifiers with adjustable RF
gain and tilt controls. They are high push-pull amplifiers producing signals with extremely low distortion. The design is capable of
158ch/129ch operation over the 5-700 MHz range.
4 Up to CATV channel 113/ Off-air channel 57
4 Designed for CATV distribution system
4 Double shielded RFI enclosure
4 Test port included on the front panel
22
$ 599.00
PAP-860
4 Front panel A/V ratio adjust
4 1¾” low profile rack mounting
Be sure to look in our Tools section for Self
Tapping screws and other tools to help you
mount your headend components on p. 68.
headend
Vented 19" Rack Shelf
$ 24.00
es-19-iv
4 Load capacity of 80 lb.
4 Available shelf space is 18” wide x 15” deep
ER-1, ER-184
Tradewind™ 84" Four Post Headend Rack
$ 196.80
HE4PR-84
4 Max load 700lb
4 Pre-drilled holes for bolting to floor
4 19” rack mount
Trip-Lite® Plug Strips
PS-3612
12 outlet
$ 44.00
PS-6020
20 outlet
$ 60.00
4 Comes with 6' cord and circuit breaker
Tradewind™ Rack Mount Enclosure System
Tradewind™ Relay Rack
er-1
71”
$ 89.95
ER-184
84”
$ 105.00
4 Max load 300 lb
cab-1410-77
12 Outlet Rack Mounted Bar
IBAR12
4 19” rack mount
Racks/Shelves
HE49R-84
Tripp-Lite®
$ 115.00
4 Strip with enhanced noise suppression on 4 outlets
$ 1,674.00
The Tradewind line-up of 19” rack mount enclosures are designed to
meet the exacting demands of today’s communication equipment
needs. Tradewind incorporates reliability, durability, flexibility and
security in a modular design.
4 Welded 1” square tubing vertical posts, front and rear
cross-ties
4 Solid top with two (2) 75 CFM exhaust fans for heat dissipation and two (2) 3” grommeted cable entry locations.
4 Removable side panels
4 Flush mounted smoked plexiglas front door with reversible
hinges
Tradewind™ Rack Mount Chassis
$ 60.00
prc12
Tradewind Rack Chassis for Mini Mods. The chassis holds 12 mini
mods with room for the PPS12 (Power Supply Insert) 3 year limited
warranty.
Tradewind™ 6 Pk. Slim Vertical Rack Shelf
RK6PACKSLIM
2.2”
$ 54.00
RK6PACKSLIM-sh
2.6”
$ 45.00
Tradewind™ Power Supply Insert
$ 99.00
pps12
4 Flush mounted perforated steel rear door with reversible
hinges
4 Open bottom for easy cable access and enhanced airflow.
4 Adjustable zinc plated front and rear mounting angles.
tapped 10-32
4 Slotted five (5) side strut design for infinite adjustment of
mounting angle locations
4 Slim vertical rack shelf for rack mounting DIRECTV or
Dish® receivers
4 Fits in standard mini mod rack chassis
4 Adjustable leveling feet on all four corners
4 Dimensions: VPO: 77"; D: 31.5"; H: 83"; W: 21-1/8”
4 Tradewind 6 Pack for mounting DIRECTV’s new D11
receivers into a headend
4 Switching power supply included
4 Built-in cooling fan
4 Rack mount: 19”
4 Textured black powder coat
4 Metal bar to hold receivers in place
23
headend
Available 2nd Quarter of 2007
Economical, turn-key video messaging system. Create pages on
your PC and play them back using the compact, attractive standalone player. Features Composite, S-Video, and VGA outputs.
Units come bundled with VIP Composer software for Windows
Character Generator
2000/XP/Vista. VIP Composer allows you to create projects
GUESTV
guestv
GUESTV brings private cable systems a suit of some of the most
watched channels on television. GUESTV brings private cable
systems a suite of some of the most watched channels on television.
Over fifty percent of television viewers use our Channel Guide to
make their viewing choice. There are fully customizable and unlimited background screens and colors to choose from. Our Concierge
Channel is an HTML based local information and advertising channel.
Each system is delivered ready to plug in with one customized
background screen and your cable lineup pre-configured. GUESTV is
the only system designed exclusively for use in DIRECTV® headend
systems. This offers remotely controlled and scheduled DIRECTV®
IRD through our Satellite On Demandô interface. The GUESTV is built
into one rack mounted GUESTV Client Unit and is all for one price.
24
using images from your PC, including scanned pictures, digital
Call for Pricing
photographs, etc. Comes with 100 professional backgrounds to
get you started. Use any TrueType font to title over your back-
Video Information Player
Estimated Cost on Arrival: $ 2,395.00
grounds, then sequence your pages in any order and publish
them to the VIP via Ethernet. Pages may be scheduled by date,
day of week, and time. Image formats supported include .BMP,
Talk to our expert sales staff and learn
more about upcoming products!
Call 800 444 7223 or visit online:
www.paceintl.com
.JPG, .TIF and more.
Also supports a wide screen format of 16:9 aspect ratio and
“portrait” mode for rotating the monitor on its side – great for
digital signage applications.
Signal
distribution
SIGNAL
DISTRIBUTION
26-31
CABLES
32-33
Connectors
33-35
Connector tools
36-37
Splitters
38
Taps
39
HARDLINE
40-41
Grounding
42-43
Wire Management
44
Wall Plates
45
Surge Protectors
46
Power Inserters
Fiber optic
25
FOXCOM® RF-2 TO FIBER DISTRIBUTION SYSTEMS
(To view our DIRECTV® MFH-1 One Wire Residential Installation chart,
turn to page 7 in Satellite Section.)
L-band / SMATV / Internet with Return Path
2
1
3
Requires Foxcom
Chasis, page 28
6
2
9
8
RG6
1
3
4
6
14
SINGLE MODE
FIBER JUMPER
Requires Foxcom
Chasis, page 28
7
7
10
8
5
9
15
5
6
8
4
13
11
12
RG6
10
9. L-BAND RECEIVER
Multiple signals are received into LNB’s and transmitted into the MFH1 System.
10. AVERLUX MICRO-NODE
1 of 16 converts optical signal to RF signal.
7. L-BAND RECEIVER
Multiple signals are received into LNB’s and 2. OFF-AIR ANTENNA
Receives CATV signal. Upstream is collected at transmitted into the MFH1 System.
8. CATV RECEIVER
3. MFH-1 IN A BOX
F-port and transmitted on return path fiber.
2. OFF-AIR ANTENNA
Balances and combines DIRECTV satellite
11. CORNERSTONE CABLE MODEM
3. MFH-1 IN A BOX
9. NAS DIPLEXER 950-3550 MHz
content.
Balances and combines DIRECTV satellite
4. SMATV HEADEND
12. TRADEWIND 16-WAY COMBINER
content..
10. MFH-1 DISTRIBUTION NODE
5
13. AVERLUX RETURN PATH RECEIVER AL351
6. AVERLUX TRANSMITTER AL127
14. NAS DIPLEXER 950-3550 MHz
1 of 16 converts optical signal to RF signal.
1 of 16 CATV receiver.
Combines L-Band and CATV signals.
Supports up to 16 units.
TRADEWIND 2-WAY SPLITTER
TERMINATION SYSTEM
Takes RF signals from MCU, converts to optical Takes RF signals from MCU, converts to optical and transmits at 1550 nm.
signal and transmits at 1550 nm.
15. MFH-1 DISTRIBUTION NODE
5
AVERLUX TRANSMITTER AL112
Takes RF signal from PFA 6600, converts to opti
Takes RF signal from PFA 6600, converts to
cal signal, transmits at 1310 nm.
optical signal, transmits at 1310 nm.
6. FOXCOM OPTICAL SPLITTER MODULE
26
Splits optical signal 16 ways.
8. FOXCOM OPTICAL SPLITTER MODULE
Splits optical signal 16 ways.
Combines L-Band and CATV signals.
Supports up to 16 units.
Signal
distribution
Foxcom® AverLux Transmitter
Foxcom® AverLux Transmitter (L-Band Only)
Call for Pricing
127f155000sc01
112d131011sc01
Call for Pricing
The AL 120 was designed to address the latest and future requirements of increasingly demanding DBS/DTH multiband distribution
needs. Modular and flexible, the AL 120 series can cost effectively
process signals from a single LNB for the elimination of ineffective coax or the output from the latest frequency devices such as
multi-polarity stackers with a bandwidth from 2 to 3500 MHz. A menu
of various output powers, wavelengths and options are available
to tailor your fiber distribution network for optimum performance.
When coupled with Foxcom’s FPS line of passive optical components, optical signals can be split and multiple AL 100 signal paths
can be combined on a signal fiber using wave division multiplexing
technology leveraging existing fiber infrastructure and insuring future
expansion capability. The AL 120 series transmitter module occupy
one slot in the AL 900-08 19”, 3U active shelf.
AverLux Series 110 CATV/SMATV transmitters process AM/VSB,
8VSB, QAM or terrestrial signals inputs from multiple current or
planned sources. Signal integrity is preserved guaranteeing excellent
video quality required for High Definition reception. The AL 110
Series serves a full range of high performance CATV/SMATV applications cost effectively. A menu of various lasers, output powers, wavelengths and options are available to provide maximum flexibility and
scalability. When coupled with Foxcom’s FPS line of LGX style optical
passive components, transmitter outputs may be split or multiple AL
100 signal paths can be combined using Wave Division Multiplexing
to make use of existing fiber infrastructure and insure future expansion capability. The AL 110 series transmitter occupy two slots in the
AL 900 19”, 3U active shelf.
Call for Pricing
35101sc01ss02
Call for Pricing
The AverLux™ Return Path Receiver complements the AL400 Series
Micro-Node to complete the Return Path Fiber Link back to the
headend. Subscriber DOCSIS return path signals are converted back
to RF where they can be combined with multiple AL350 outputs for
processing by the operators Cable Modem Termination System. A
typical application calls for one AL350 for each AL400. The AverLux™ AL900 Series Active shelf can accomodate up to eight AL350
modules.
Foxcom® 8 Slot Shelf
Foxcom® AverLux Receiver (L-Band Only)
31201SC01SS01
Call for Pricing
The AverLux family of optical receivers complements the AL 110
Series transmitters completing the optical broadband RF video link
by converting optical signals transparently to the originating format;
AM/VSB, 8VSB, QAM or off-air terrestrial and head-end generated.
Available in a compact, wall mount enclosure, the receiver fits easily
into any MDU distribution scheme to support coax distribution or as
the perfect fiber link for applications where coax approaches are limited. Powering for the AL 300 series is provided by the AL 900 series
of power adapters, inserters and cables.
Foxcom® AverLux Receiver (L-Band Only)
32701SC01SS01
Call for Pricing
The AverLux family of optical receivers compliments the AL 120
Series transmitters completing the optical broadband RF video link
by converting optical signals transparently in the originating format;
satellite QPSK/8PSK. With an available bandwidth from 2 – 3500
MHz. The AL 120 Series cost effectively handles the most complex
stacking schemes or basic LNB intra/inter-building spans. Available
in a compact, wall mount enclosure, the receiver fits easily into any
MDU distribution schemes supporting coax distribution or as the
perfect fiber link where traditional coax approaches are limited.
90008001
Call for Pricing
The AL 900-08 is a 19” rack mounted, 3U shelf accommodating any
combination of up to eight AverLux™ shelf mounted Transmitters
or Receivers. The AL 900 comes equipped with the AL901 Universal
100/220 VAC power supply to support most global AC mains applications and capable of powering a fully populated rack. An optional
-48 VDC supply is available on special request. An additional, dedicated slot in the AL900 is reserved for the insertion of an AL901 spare
or redundant power supply. All DC power connections are accomplished via a PCB backplane and mating DB-9 connectors for simple
and trouble free operation and maintenance.
27
Power Inserters
112d131007sc01
Foxcom® AverLux Return Path Receiver
Signal
distribution
Foxcom® AverLux Micro-Node
Foxcom® 1x16 Optical Splitter Module
FPSSPL01SC16001
Call for Pricing
The LGX style splitter module with 1:16 configuration. Optical input
is from the rear of the module and all outputs exit the front. The
1×16 occupies two LGX slots.
41201SC01SS01
Call for Pricing
The AL400 series Micro-Node supports CATV band signal distribution as well as two-way cable modem data services affording operators the widest choice of content and service provisions available in a
single wire system.
Foxcom® Universal Power Supply
9100142n
Call for Pricing
Used as the primary power source for the AverLux™ AL300 and
AL400 Series products, the AL910 is available with two ratings and
adapter cables to a host of combinations and applications at the
building, in the IDF closet or to power the CPE. Versions are available to support one to several modules with ratings from 500 mA to
over 4.0 Amps. Use with Power Supply/Insert Cable (opposite page).
4 Universal AC input
4 2-pole USA plug [ROW plugs - optional “E” suffix]
Foxcom Rx 60-90VAC Power Adapter
®
Fiber Optic
Foxcom 1x8 Optical Splitter Module
®
fpsspl01sc08001
Call for Pricing
The LGX style splitter module with 1:8 configuration. Optical input
is from the rear of the module and all outputs exit the front. The 1×8
occupies one LGX slot.
Call for Pricing
920-0123F
Used as an alternative power source for the Averlux™ AL300 and
AL400 Series products where deployments are coax cable powered,
the Power Inserter converts a cable industry standard, center conductor fed, 60/90 VAC source into 12 VDC for use by the equipment.
AS with the AL910 Series, adapter cables offer flexibility with current
capability up to 2.3 Amp.
4 Multiple powering options
4 Class II power [without earth pin]
4 Protections: Short circuit / Over load / Over voltage
4 Approvals: UL / CUL / CCC / CB / CB
4 Reduced labor costs
Foxcom® RX Power Adapter
910-0115n
Foxcom® Chasis
FPS-LGx-12
Call for Pricing
4 Slide out drawer provides front access
Foxcom® Standalone Tx Power Supply AL100/200
4 Holds 12 LGX modules
9400108n
4 Recessed face plate for jumper protection
4 Built-in cable storage
4 Fold-down rear door
4 16-gauge, black aluminium
4 Smoked lexan front door
4 For 19” rack
28
Call for Pricing
The AL 940 Series Standalone Power Supply is used for powering a
single AverLux™ AL 100, 200 and 350 Series Transmitters or Return
Path Receivers with the wall mount option where the AL900 Series
Shelf is not applicable or required. The unit features a Universal
100/220 AC mains input with a 12 VDC, [minimum] 800 mA output via
a female DB-9 connector to mate with the module’s power input.
Call for Pricing
Used as the primary power source for the AverLux™ AL300 and
AL400 Series products, the AL910 is available with two ratings and
adapter cables to a host of combinations and applications at the
building, in the IDF closet or to power the CPE. Versions are available to support one to several modules with ratings from 500 mA to
over 4.0 Amps.
4 12VDC / 1.5A Out
4 Protections: Short circuit / Over load / Over voltage
4 Approvals: UL / CUL / CCC / CB / CB
Signal
distribution
Splice Protection Sleeves
fp-03
Foxcom® Power Supply/Inserter Cable
Call for Pricing
9300623s
When used wth the AL910 or AL920 series of power adapters, the
AL930 cable provides the ability to power up to 4 AL300/400 Modules via four 2.1 mm co-ax plugs, one F-Type Male Connector for
related CPE, and one 5-pin male Mini-DIN connector for cascading
additional adapter cables or powering related Foxcom product lines
of equipment.
SDTV products.
The SDTVplus System is a cost effective hybrid fiberoptic-coax broadband
Call for Pricing
FSM-50S KIT
The FSM-50S Fusion Splicer sets the standard for core alignment
fusion splicers. The FSM-50S is the fastest fi eld splicer available,
and completes a splice and tube heat in a total of 44 seconds.
Special features include its small size and weight - the smallest in the
industry - and the legendary ruggedness Fujikura is known for. The
FSM-50S also includes user-friendly features such as calibration-free
arc adjustments, automatic fiber type identifi cation and reduced
operational steps. The FSM-50S also offers increased fl exibility for
various splicing tasks with user-selectable front and back monitor
positioning.
4 Automatic core to core, low-loss splicing regardless of fiber
quality or age
4 9-second splicing time, 35-second heat time (60mm sleeve)
The FP-03 series is the industry standard for durable and lasting
protection of single fi ber splices in fi eld installations, while the FP04(T)/05 provide these same performance levels for 8/12 fi ber ribbon
respectively.
The FPS01 and FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves
provide the known reliability of Fujikura sleeves in the smallest
possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range
of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing
optical modules.
Fiber Optic
Pace is also your distributor of Foxcom®
AFL® Fiber Splicer with Access Kit
4 Dual, user selectable monitor position
SC-APC PIGTAIL 2m LENGTH
entertainment and data services in multiple
4 Excellent visibility in bright sunlight with
c146523-0002
dwelling units (MDUs). SDTVplus provides
4 5.6” TFT Color LCD display
convergence services such as DBS, Cable
4 Automatic arc calibration
distribution system, used to distribute
TV, Local Off-Air TV, and broadband based
4 Long life battery (up to 160 splice/shrink cycles per charge)
Internet services.
Call us today to learn more!
800 444 7223
Call for Pricing
Call for Pricing
The Subscription Channel (SC) connector is best known for its
locking mechanism that gives an audible ‘click’ when mounted.
The push-pull design prevents rotational misalignment. The SC
connector family includes the Physical Contact (PC) zirconia ceramic
ferrule endface that reduces back reflection in both singlemode and
multimode versions. To further reduce unwanted back reflection in
a single-mode system, AFL offers the Angled Physical Contact (APC)
version that has a ferrule endface with an 8° angle. The molded connector body and strain-relief boots are made from UL-rated material
with the option of RoHS compliance.
Integrating Technology & Distribution
29
Signal
distribution
AFL® LL-2400 Single Fusion Splice Tray
91710-06
1 Meter FC/APC-SC-APC Jumper
Call for Pricing
AFCASCR2002Q001
AFL® FPB-201 Fiber Demarcation Box
DM000108
Call for Pricing
AFL has designed a cost effective solution for a protecting the passive demarcation of premise fibers. The FPB-201 is injection molded
with an integral fiber retention system allowing for quick installation
and a positive lock strain relief for most premise fiber cable. This
device allows for the indoor and protected outdoors interconnect of
up to 2 standard SC adapters in a protected white plastic enclosure
to blend in most premise environments.
4 Compact size takes up less wall space for installation
SC/APC-SC/APC Jumper
Fiber Optic
AsCASCRs001Q001
1 Meter
Call for Pricing
AsCASCRs001Q002
2 Meter
Call for Pricing
AsCASCRt001Q00
20 Meter
Call for Pricing
4 Thin profi le prevents accidental damage in congested
installations
4 Molded inner slack storage area insures minimum bend
radius preventing micro bends and unnecessary loss or
fiber damage
4 No additional tie wraps or clamps needed due to integral
positive lock strain relief
4 Inner tray retains up to two fusion or mechanical splice
sleeves
4 Accepts standard SC connectors SCA or SCU
C130082
4 Protects fiber connection from accidental contamination or
movement allowing long term preservation of connection in
hostile environments
C130082
AFL® Small Flange SC/APC Bulkhead adaptor
C130082
Call for Pricing
4 FC - SC Simplex
4 Ceramic insert
4 Stainless steel
Small Flange SC/APC Bulkhead adaptor
c147880
4 Cost effective passive solution protects each connection
without driving project over budget
4 Key-hole, three screw mounting allows two of three screws
to be leveled and pre installed
AFL® LL-2450 Single Fusion Splice Tray
91957-00
AFL® LightLink™ LL-400s
FM000639
4 Cable entry/exit grommet seals
4 Removable Hinged Front Cover
4 Removable sliding cover for easy access to complete box in
congested locations
4 72 single fusion splices
4 Stainless steel
Call for Pricing
The LL-400s Fiber Optic Splicing and Distribution Enclosure provides
for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution, and building entrance applications. Each LL-400s
enclosure features a scratch resistant powder coated aluminum
base and a fully gasketed cover. A unique self-sizing grommet
design allows for express and preterminated cable installation. The
LL-400s is a butt-style enclosure equipped with four independent
cable entry/exit grommets, used for outdoor pedestal or indoor
building entrance and riser splicing applications. The unit supports
a maximum storage and splicing capacity of up to 72 single or 144
mass-fused fibers.
4 Independent cable strain relief system
4 Fiber routing system
Call for Pricing
Call for Pricing
4 Stores 12 single fusion splices
4 Two locations available for splice and connector to reside
allows fl exible installation and up to two splices if needed
4 SC+SC Splice Block
30
Call for Pricing
4 Splice tray support system
4 144 mass fusion splices
Signal
distribution
AFL® LG-50 Sealed Fiber Optic Splice Closure
FC000053
Call for Pricing
The LG-50 is a versatile closure that was designed for splicing low
fiber counts, sheath repair or to provide an isolation gap on armored
cables. The LG-50 can be used in either an in-line or butt confi guration and is rated for 10 ft. waterhead.
4 Two cable ports accommodate cables to 0.70” O.D. for
splicing and 1.0” O.D. for grounding/bonding
4 Individual cable retention clamps
4 Removable, integral central splicing module
AFL® Optical Power Meter
Call for Pricing
OPM1-2C
Optical power meters may be used to measure optical power in
premises, telco, or broadband fiber optic networks. When used with
an LED or laser light source, an OPM can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only
two controls – Power and Wavelength – the OPM 1 is our simplest to
use optical power meter. Optical power in dBm and the calibration
wavelength setting are displayed on an easy to read LCD display.
4 Common or isolated grounding/bonding
4 Strand mounting hardware included
AFL® Connector/Adapter Cleaning Kit
C182120
Call for Pricing
4 FCC-R Replacement cartridge (400 wipes)
AFL® HiLite
4 ACT-01 Adapter Cleaner Tips (20)
Call for Pricing
hilite
AFL® LG-20 Sealed Fiber Optic Splice Closure
FC000002
Call for Pricing
The LG-200 is a sealed dome closure designed for medium count
fiber splicing (< 96 single or 288 mass) in a butt confi guration. Utilized in aerial or underground environments where a sealed closure is
required. Ideal for express or ring applications. The LG-200 requires
no tools for re-entry.
4 Dome Closure - 96 Single or 144 mass fusion capable
4 5 cable, kits for sealing and retention
4 Grounding Terminal
4 No cable grounding kits
4 Hanger brackets or splice trays
4 Supports loose tube, core tube, dielectric and armored
cable designs
4 Installation and re-entry using common hand tools
The HiLite is compact but powerful visible red laser sources designed to troubleshoot faults on fiber optic cables. Light generated
by these units will escape from sharp bends and breaks in jacketed
or bare fibers, as well as poorly mated connectors. They can identify
faults in fiber optic jumper cables, distribution frames, patch panels,
and splice trays. The HiLite is an excellent complement to an OTDR
because they can locate faults inside the OTDR’s dead-zone. Other
applications include end-to-end continuity checks, identifying connectors in patch panels and fibers during splicing operations. The
universal connector interface provides fast operation with many connector styles without changing an adapter.
4 Automatic core to core, low-loss splicing regardless of fiber
quality or age
4 9-second splicing time, 35-second heat time (60mm sleeve)
4 Dual, user selectable monitor position
4 Excellent visibility in bright sunlight with
4 Alcohol dispenser (1)
4 Lint free Kim Wipes
4 Carry case
AFL® Fiber Preparation Fluid
fpf-1
Call for Pricing
FPF1 is a non-flammable, environmentally safe, solvent engineered
to clean fibers after stripping, before fusion splicing or field termination. This product is exclusively produced for Noyes Test & Inspection by Micro Care Corporation, a world leader in cleaning solvents.
4 5.6” TFT Color LCD display
4 Automatic arc calibration
4 Long life battery (up to 160 splice/shrink cycles per charge)
4 Fully sealed to protect fiber and splices ensuring longevity
31
Fiber Optic
The Connector/Adapter Cleaning Kit is a complete kit solution for
maintaining the optical integrity of passive network components
such as connectors, jumpers, couplers, patch panels, etc. The Connector/Adapter Cleaning Kit includes all the cleaning supplies you
need to maintain clean ferrules and connectors in an organized, portable and rugged carrying case. Rugged carrying case for complete
protection and organization of supplies
4 FCC-02R Prep Cleaner (1)
Signal
distribution
Save your back from lugging
cables around your job site. Check
out our cable caddies on p. 60.
Copper Covered Steele
Reel in Box
Jacket Type and
Thickness in / mm
Nom Imp.
Shields
Type &
Coverage
Nom Vel of
Prop.
Dialetric Type
Nom OD in / mm
Nominal
Capacitance
pF/ft pF/m
RG6
Center
Conductor
Solid Copper
Price
Coax Cable
CH1829 RG6 Single
Foam PE .180 4.57
60%
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 34.00
CH1829-WH RG6 Single
Foam PE .180 4.57
60%
White PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 34.00
CH1829SC RG6 Single
Foam PE .180 4.57
60%
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 70.00
CH1829SC-WH RG6 Single
Foam PE .180 4.57
60%
White PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 70.00
CH1839 RG6 Single With Messenger
Foam PE .180 4.57
60%
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 50.00
CH1839SC RG6 Single with Messenger
Foam PE .180 4.57
60%
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 80.00
CH1840 RG6 Dual With Messenger
Foam PE .180 4.57
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 90.00
CH1840SC RG6 Dual with Messenger
Foam PE .180 4.57
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 150.00
CH1840SC-WH RG6 Dual With Messenger
Foam PE .180 4.57
White PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 150.00
CH1841 RG6 Dual
Foam PE .180 4.57
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 90.00
CH1841SC RG6 Dual
Foam PE .180 4.57
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 170.00
CH1841-WH RG6 Dual
Foam PE .180 4.57
White PVC .270 6.86
16.2 53.1
82%
75 Ohm
500 ft
$ 90.00
CHRG6Q-BL-UL RG6 Quad
Foam PE .180 4.57
60% + 40%
Black PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 90.00
CHRG6Q-WH-UL RG6 Quad
Foam PE .180 4.57
60% + 40%
White PVC .270 6.86
16.2 53.1
82%
75 Ohm
1000 ft
$ 90.00
Black PVC .400 10.16
16.2 53.1
82%
75 Ohm
1000 ft
$ 110.00
Black PVC .400 10.16
16.2 53.1
82%
75 Ohm
1000 ft
$ 130.00
60%
60%
60%
60%
60%
60%
RG11
CHRG11
Foam PE .280 7.11
CHRG11FL (Flooded)
Foam PE .280 7.11
32
60%
60%
Signal
distribution
Commscope® RG6
5730bx
1000 ft. Box
$ 90.00
Commscope® RG6 Quad Plenum Cable
2227v
1000 ft. Reel
$ 460.00
Commscope® RG6 Plenum Cable
2275v
1000 ft. Reel
$ 440.00
Commscope® RG59 Spool
5571pspl blk
Black, 1000 ft. Reel
$ 80.00
5571spool
White, 1000 ft. Reel
$ 80.00
tx15a60feb/dbs
flooded
$ 480.00
Snap-N-Seal Compression Universal “F" Connector
for RG6 & RG6 Quad Coax
tx15a60vbl/dbs
standard
$ 540.00
sns1p6u
.500 Flex Feeder
bag of 50
$ 15.00
Commscope® RG11 Plenum Cable
2285k
1000 ft. Reel
$ 1400.00
Commscope® RG11 Quad Plenum Cable
2287v
1000 ft. Reel
$ 2000.00
753805b
500 ft.
4 Conductor, 24 Gauge Phone Wire
$ 625.00
24-4-1000
1000 ft. Pull Box
$ 40.00
Snap-N-Seal Compression “F" Connector for RG6
Coax
SNS1P6
bag of 50
$ 15.00
4 5 conductor, 23 gauge, solid copper
CAT5E Enhanced
Mini RG59 Cable
zm-bl-500
Blue
$ 45.00
zm-rd-500
Red
$ 45.00
zm-y-500
Yellow
$ 45.00
zm-wh-500
White
$ 45.00
zm-bk-500
Black
$ 45.00
cat5e-b
1000 ft. Pull Box
$ 90.00
Cat5e-w
1000 ft. Pull Box
$ 90.00
Cat5e-y
1000 ft. Pull Box
$ 90.00
Quad Coax
sns1p6qs
bag of 50
$ 15.00
Snap-N-Seal Compression “F" Connector for
RG59 Coax
8" Flat Cable
$ .79
ch-flat
SNS1P59
bag of 50
$ 15.00
4 Used for running coax under windows or doors
4 Ideal for RV's and apartments
33
Cable/Connectors
Commscope® HDTV Cable
Signal
distribution
Plenum Coax
$ .30 ea.
SNSpla
3 GIG F90 Connector
f90-2g
PPC RG-6 Quad Compression Connector
cmp6q
bag of 50
bag of 100
$ 70.00
$ 14.00
3 GIG Barrel Connector
f81-2g
Coax
$ 4.55 ea.
SNS11AS
bag of 100
$ 18.00
bag of 100
$ 12.00
Tradewind™ RG6 Radial Crimp “F" Connector
RG6-R
bag of 100
$ 14.00
RG6 Radial Crimp “F" Connector with O-ring
Connectors
rg6-ro
bag of 100
$ 16.00
2.8 GIG Terminator
RG6 Cable Connectors
rg6wr-icm
PPC RG-6 Compression Connectors
cmp6
bag of 50
$ 14.00
rg6wro-icm
bag of 100
$ 22.00
(outdoor) bag of 100
$ 28.00
f59t2g
RG6 & Quad With Ring
rg6NR-icm
DIRECTV®
&
DISH Network
APPROVED!
rg6NRo-icm
bag of 100
$ 22.00
(outdoor) bag of 100
$ 28.00
rca-f
RG59 Radial Connectors .290
RG59wr-icm
bag of 100
bag of 50
$ 17.00
4 Use the EX6XL for either standard or Quad RG6 coax
4 Use the VT-100 Compression Tool for an excellent connection
$ .22
$ 27.00
PPC Universal RG6 and RG6 Quad Compression
Connector
ex6xl
RCA Female to F Male Adapter
RCA Coupler
rca-rca
RG6 Hex Crimp “F" Connector
rg6-hex
bag of 100
$ .19
$ 10.00
RG6 Hex Crimp “F" Connector with O-ring and Gel
rg6-hexso
bag of 100
$ 10.00
F Female to RCA Male Adapter
ff-r
34
$ .40
Signal
distribution
Right Angle RCA
RG6 & Quad Uni RCA Compression Connectors
$ 2.00
35-511g
$ 1.25
FSC6RCAuv5
Sub Mini (26GA) Compression BNC
$ 2.37
fsbnc1rgb
RG6 F Compression Connector
fs6uv5
bag of 25
$ 11.25
Submini (26 GA) Compress RCA
RGBHV BNC Mini 4 Part
$ 2.37
FSRCA1RGB
$ 2.37
fsbnc-15rgb
F11WR
Connectors
Two Piece RG-11 F Connector
$ 4.50
Female F to Male BNC Adapter
$ .36
bfa
Mini Cable RCA Connector
$ 2.37
FSRCA-15RGB
RG11 BNC 1-each
fs11bnc
$ 4.00
RG59 RCA Radial Crimp Connectors
$ .55
RG59-rcawr
Color Bands
FSCR-x
bag of 100
$ 4.00
BNC Compression Connector for RG6 & Quad Coax
fs6bncuv5
$ 2.38
RG59 & Quad Uni RCA Compression Connectors
FSC59RCA-uv5
Weather Boot
wb-1
RG59 & Quad BNC Connector
fs59bncuv5
$ 1.25
$ .12
$ 2.38
35
Signal
distribution
Platinum Tools® Easy RJ45
Connector on p. 44.
Platinum Tools CAT5E Stripper
15015
$ 13.00
This economical tool has been specifically designed to strip the
cable jackets from Category 5 and 5e twisted pair cables. No adjustments are required and will not nick the inner conductors.
EZ-RJ45 Crimp Tool
F Connector Compression Tool
$ 25.00
tw-ct
4 This is a heavy duty compression tool and works on all PPC
and Snap-N-Seal Compression Connectors.
100004
$ 59.99
4 This high quality crimp tool is designed to quickly crimp and
cut the wires of the EZ-RJ45® connector in one easy simple
operation
4 The ratcheted straight action crimping motion ensures a
uniform crimp every cycle
4 Features precision cast crimping dies for superior accuracy
4 Built in wire cutter and stripper
Platinum Tools® Compression Crimping Tool
Connector Tools
cs-596
$ 7.50
Pro-Brand RG6/RG59 Cable Stripper
RG-Stripper
$ 39.95
16201
RG6 and RG59 Cable Stripper
$ 10.00
4 The SealSmart Compression Crimp Tool provides simple,
fast and reliable terminations
4 The perfect solution for CATV, DSS, Security and Residential
Structured wiring installations
4 Connector adapters are included for F, RCA & BNC
SealSmart connectors and mount in handle for easy storage
4 Straight action mechanism provides 360° uniform compression
4 Adjustable crimp height
RJ 45 Tool
Ripley RG6/59 RG6 Quad Cable Stripper
sdt596-250
$ 22.00
Ripley RG11 Cable Stripper
sdt-11-250
$ 19.95
tcrj45t
4 Cuts, Strips And Crimps
Ripley Ratcheting Crimp Tool For RG6 radial
connectors
rtt
$ 75.00
4 Use on RG6-R and RG6-RO connectors for water-tight seal
4 Powder coated finish for long lasting durability with cushioned handles
Hex Crimp Tool
hx-596Q
$ 16.66
4 Use with RG6 & RG59 HEX connectors
$ 22.00
Radial Crimping Tool
$ 69.00
RTC360
4 Works with Pace & ICM radial connectors
4 Produces a watertight, weather-resistant seal that also
reduces radiation leakage
Strip Tool for RG59, RG6 & RGB Cable
ps/59/6/rgb
36
$ 23.00
4 Made of high quality stainless steel
Snap-N-Seal Compression Tool
snsutL
$ 70.00
4 Use for a proper connection on RG6, RG59 & RCA Snap N
Seal connectors
Signal
distribution
Attaching a Connector to Cable
Compression Tool
vt100
$ 34.50
4 Works on Snap-N-Seal and PPC compression connectors
Compression Tool
$ 75.71
cplcct-lM
outer shield
braid foil
4 Use for RG6/RG59, BNC, F, & RCA Compression Connectors
center
conductor
Dielectric
Compression Tool
vt300
$ 83.50
6 x 6 / 8 x 8 Modular Crimper Tool
$ 25.00
300-568
4 PPC compression crimper for RG6, RG59, & RG11
4 Cuts, strips and crimps Dual modular crimping tool
Minimum industry standard for coaxial cable from the LNB to the receiver is:
4 RG-6 Double shield with 60% braid
4 Cable that has been “swept” to 2GHz for frequency response is required for stacked LNB’s
it-1000
$ 74.50
100 Feed Thru Bushings
4 For RG6 and RG59 coax
Replacement Blades for the IT-1000
it-1002
$ 19.00
rpt
Snap-N-Seal Comp. and Stripping Tool
$ 14.00
ftb-56B
RG6 (black)
$ 2.00
ftb-56I
RG6 (ivory)
$ 7.00
ftb-59B
RG59 (black)
$ 2.00
ftb-59I
RG59 (ivory)
$ 5.00
ftbd-56b
black, bag of 100
$ 2.00
ftbd-56I
ivory., bag of 100
$ 2.00
RG6 Dual Feed Thru
Universal Compression Tool
cat-universal
$ 61.52
cat-as
500 Gardner Bender Wire Staples
$ 78.00
Gently peel back the braid and push on the connector. Center conductor wire should extend 1/8” beyond connector. Use correct compression tool to fit the connector to the cable
4 Improperly connected fittings may cause an impedance mismatch, which may effect picture quality
Due to the nature of cable, there is signal loss and voltage loss
throughout the cable. Calculate signal loss of RG6 at 6dB per 100 feet
for VHF/UHF frequencies and 10dB per 100 feet for LNB (950 MHz1450 MHz) frequencies.
4 Signal loss due to excessive cable length may necessitate
in-line amplification
4 In-line amplifiers do not amplify voltage
It is important to use coaxial cable that is rated to the frequencies for
which it is going to pass
4 RG-59 is rated to pass up to 1GHz
4 RG-6 that is swept tested to 2 GHz will pass 2250 MHz, which
will work with stacked LNB systems
4 Works on RG6 and RG59 compression "F" connectors
Compression Tool for RG59/6/7/11
Use correct crimping tool for connectors and cable being used.
Strip the wire to have _” dielectric showing. When stripping the wire,
make sure to not cut off the braid
4 The braid acts as the ground for the cable
$ 15.00
PS1752U
37
Connector Tools
Ripley Pocket Toner
4 Compression cable fittings or other fittings that meet industry standards for water ingress as well as RF ingress and
egress
Signal
distribution
Tspl-2
Tspl-6
HR S2
Tradewind™ 1 GHz Splitters
HR S2p
Tradewind™ 2 GHz Splitters
HR S6p
tspl-2
2-way
$ .75
hr s2
2 GHz 2-way Splitter
$ 2.25
Tradewind™ 2 GHz Power Passing Splitters
tspl-3
3-way
$ 1.25
hr s3
$ 3.90
hr s2p
$ 2.70
tspl-4
4-way $ 1.34
hr s4
$ 5.25
hr s3p
$ 4.50
tspl-6
6-way $ 2.57
hr s6
$ 7.00
hr s4p
$ 5.50
tspl-8
8-way $ 3.12
hr s8
$ 8.99
hr s6p
$ 7.50
tspl-12
12-way
$ 13.00
hr s8p
$ 9.50
tspl-16
16 way
$ 21.00
Splitters
4 Splits signal levels between outlets
4 Can be used to combine signals
4 Light weight metal housing
4 Grounding screw
hr s2v
hr s6v
Tradewind 2 GHz Vertical Splitters
™
vsd3wsp
vsd8wsp
ViewSonic 1 GHz Splitters
vsd2wsp
2 - Way
$ 1.70
vsd3wsp
3 - Way
$ 2.30
vsd4wsp
4 - Way
$ 3.00
vsd6wsp
6 - Way $ 8.00
vsd8wsp
8 - Way
$ 9.00
38
hr s2v
2-Way
$ 2.90
Tradewind™ 2 Gig Drop Grade Diplexer
hr s3v
3-Way
$ 4.50
DPLX2g-DG
hr s4v
4-Way
$ 6.75
hr s6v
6-Way
$ 8.50
hr s8v
8-Way
$ 10.75
Used for indoor distribution network configuration. 1 GHz bandwidth
with low loss characteristics allow for advanced services that require
more bandwidth.
4 EMI isolation
4 Vertical connections for distribution panels
4 Splits signal unevenly from trunk output
$ 1.70
4 Used for combining VHF/UHF & Satellite
Don’t see what you
are looking for? Call
our expert sales staff for
additional models of
splitters and taps!
Signal
distribution
twtv4a-20
Tradewind™ 1 GHz Taps
twhr-120
1-Way, 20 dB
$ 5.50
twhr-210
2-Way, 10 dB
$ 6.50
twhr-212
2-Way, 12 dB
$ 6.50
twhr-215
2-Way, 15 dB
$ 6.50
twhr-220
2-Way, 20 dB
$ 6.50
twtv4a-08
4-Way, 8 dB
$ 4.50
twhr-225
2-Way, 25 dB
$ 6.50
twtv4a-11
4-Way, 11 dB
$ 4.50
twhr-230
2-Way, 30 dB
$ 6.50
twtv4a-20
4-Way, 20 dB
$ 4.50
twhr-412
4-Way, 12 dB
$ 9.50
twtv8a-11
8-Way, 11 dB
$ 9.99
twhr-416
4-Way, 16 dB
$ 9.50
twtv8a-14
8-Way, 14 dB
$ 9.99
twhr-420
4-Way, 20 dB
$ 9.50
twtv8a-17
8-Way, 17 dB
$ 9.99
twhr-424
4-Way, 24 dB
$ 9.50
twtva8a-20
8-Way, 20 dB
$ 9.99
True-Spec UHF/VHF Separator Joiner
uvsj
Call for Pricing
Tradewind™ 3 GHz Attenuator
twfam1g-*
$ 1.00
Taps
Used for indoor distribution network configuration. 1 GHz bandwidth
with low loss characteristics allow for advanced services that require
more bandwidth.
4 EMI isolation
Reduces RF signal strength to reduce inter modulation caused by
high input levels. Not power passing.
4 Available in 3, 6,10, 16, and 20 dB
4 Vertical connections for distribution panels
4 Nickel plated brass construction
4 Splits signal unevenly from trunk output
4 Works for satellite systems
True-Spec One Port Directional Couplers
tscw-6, tscw-9, tscw-12, tscw-16,tscw-20,
scw-24, tscw-27, tscw-30
Call for Pricing
Tradewind™ 3 GHz Power Passing Attenuator
twfamp2g*
$ 1.50
Reduces RF signal strength to reduce inter modulation caused by
high input levels and to reduce satellite signals to their desired
range. Allows DC power pass.
4 Available in 3, 6, and 10 dB
twtv4a-20
4 Nickel plated brass construction
Tradewind 2 GHz Taps
™
4 Works for satellite systems
twhr-108
1-Way, 8 dB
$ 5.50
twhr-110
1-Way, 10 dB
$ 5.50
twhr-112
1-Way, 12 dB
$ 5.50
twhr-115
1-Way, 15 dB
$ 5.50
4 DC power pass up to 200 mA of current
True-Spec One Port Taps
tsc-6, tsc-9, tsc-12, tsc-16, tsc-20, tsc-24,
tsc-27, tsc-30
Call for Pricing
39
Signal
distribution
312t-29
314t-08
Tradewind™ 2-way Power Passing Hardline Taps
313s
Tradewind 4-way Power Passing Hardline Taps
™
$ 12.00
Hardline
312t-04
$ 11.00
314t-08
312t-08
$ 11.00
314t-11
$ 12.00
312t-11
$ 11.00
314t-14
$ 12.00
312t-14
$ 11.00
314t-17
$ 12.00
312t-17
$ 11.00
314t-20
$ 12.00
312t-20
$ 11.00
314t-23
$ 12.00
312t-23
$ 11.00
314t-26
$ 12.00
312t-26
$ 11.00
314t-29
$ 12.00
312t-29
$ 11.00
4 Superior interwoven RFI gasket shielding
4 Pedestal or areal mounting
40
312s
2-Way
$ 27.50
313s
3-Way
$ 27.50
Tradewind™ Hardline Directional Couplers
2-way and 4-way power passing aluminum hardline taps are used
for distribution network configuration. 1 GHz bandwidth with low
loss characteristics allow for advanced services that require more
bandwidth.
4 Anti-corrosive 360 aluminum housing
4 Captive stainless steel hardware
Tradewind™ Hardline Splitters
311dc-16
6 dB
$ 27.50
311dc-08
8 dB
$ 27.50
311dc-12
12 dB
$ 27.50
314t-08
Tradewind™ 8-way Hardline Taps - Power Passing
318t-11
Terminated
$ 22.80
318t-14
Insertion - 4.7 dB
$ 22.80
318t-17
Insertion - 3.3 dB
$ 22.80
318t-20
Insertion - 2.3 dB
$ 22.80
318t-23
Insertion - 2 dB
$ 22.80
318t-26
Insertion - 1.5 dB
$ 22.80
318t-29
Insertion - 1.5 dB
$ 22.80
Tradewind™ Hardline Power Inserter
311pi
$ 27.50
Signal
distribution
Splice Coupler
si412k3
P3 .412 Splice Coupler
$ 14.00
si500k3
$ 13.00
si625k3
$ 11.25
si750k3
$ 25.00
Entry to F Female
$ 3.50
f625e
Housing Terminator
$ 8.25
625trbV
Ai625ffk3
BAFF Connectors
P3 .412 to F female BAFF
$ 10.00
AI500FFK3
$ 13.00
AI540FFK3
$ 10.37
AI625FFK3
$ 14.70
AI750FFK3
$ 20.75
accbaff
Pin connector to "F" Female
Omega II - AC-Only Power Supply
Housing to Housing Coupler
ete625lr
Housing to housing coupler
$ 7.99
Right Angle Adaptor
ei625k3
Pin Connectors
eu90
Right Angle Adaptor
ei412k3
P3 .421 Entry Pin
$ 8.40
ei500k3
P3 .500 Entry Pin
$ 5.50
ei500Q3
QR .500 Entry Pin
$ 9.22
ei625k3
P3 .625 Entry Pin
$ 7.00
ei750k3
P3 .750 Entry Pin
$ 10.00
Universal Housing Splice Block
$ 10.99
hsb
acc-15chtiou
$ 6.00
Housing splice block universal
$ 8.00
px-5200-06
6 Amp.
$ 320.00
px-5200-15
15 Amp.
$ 335.00
The Omega II power supply is a non-standby AC only power supply
designed specifically for powering CATV and broadband distribution
systems. The power supply consists of a ferro resonant transformer,
UL listed 20 Amp AC circuit breaker, input transient protection, 115
/230 Vac output utility receptacle for power supply use only (not
as a convenience outlet) and an optional Time Delay Relay and
Output current meter. The Omega II power supply is enclosed in a
weatherproof cabinet, secured by a keyed lock. The cabinet comes
with a bracket for pole mounting or an optional pedestal for ground
placement. An indicator lamp is provided on the unit to indicate the
unit is operating normally. The Omega II power supply is designed
to deliver a 60 Vac or 90 Vac regulated output voltage from a 115/230
Vac/60 Hz input. (Optional 115.230 Vac/50 Hz input).
$ 12.00
4 Flexfeeder to Pin connector
41
Hardline
AI412FFK3
Signal
distribution
DIRECTV®
&
DISH Network
APPROVED!
Split Bolts
2.8 GIG Dual Ground Block 2 Lugs
gb2g-1
$ .30
gb2g-2
$ .60
gb2g-4
$ 1.25
Used to connect (splice) coaxial cable F connectors and to connect
ground cables to other components. Noncorrosive. Compatible with
all satellite delivery systems: DirecTV, DISH Network, and C-Band.
Also compatible with all cable TV and off-air services.
4 Barrel connectors with ground lugs
sb4
#4 split bolt
$ .65
Bounding Corner
sb6
#6 split bolt
$ .62
TCSC51-CF
Split-Bolts allow you to share the house ground with cable TV and
satellite grounding systems. High clamping force ensures that a solid
connection is made for maximum conductivity. No. 4 split bolts are
suitable for use with 8~4 AWG ground wire. No. 6 split bolts are suitable for use with 10~6 AWG ground wire.
4 High clamping force
$ .70
4 Stainless steel
4 No. 4 split bolts are suitable for use with 8~4 AWG
ground wire
Grounding
4 Blue insulating end cap identifies satellite compatibility
4 No. 6 split bolts are suitable for use with 10~6 AWG
ground wire
4 Noncorrosive metal construction
4 UL listed #KDSH.E224839
Ground Straps
4 UL listed #E224839
DIRECTV®
&
DISH Network
APPROVED!
a-24-6
6" ground strap
$ .33
a-24-12
12" ground strap
$ .35
4 Flexible construction
4 Pre-holed adjustable length strip
4 Grounding screw
Meter Box Corner Clamp
$ .75
ch-corner
4 Allows a fixed & positive contact without interference
4 Works with ground wire
4 Side-mount meter box
Water Pipe Ground Clamp
ch-clamp
$ .39
Glavanized Ground Straps
Used to connect ground cables to metal pipes. It will securely grip
water pipes up to one inch in diameter, and accepts 6–12 gage wire.
4 Single ground lug
4 Noncorrosive metal construction
4 For pipes up to 1”
4 UL listed #E224840
42
6" ground strap
$ .29
TCGGS-12
12" ground strap
$ .32
4 Flexible construction
3/8” Ground Clamp
CH-3/8RODCLAMP
TCGGS-6
$ .59
4 Pre-holed adjustable length strip
4 Grounding screw
Signal
distribution
4' Ground Rod
gr-4
$ .99
Ground rod for use when grounding earth ground. Overall length is
4ft. Constructed from copper covered steel.
4 Pre-installed ground clamp
4 Sharp edge for easier insertion
Ripley Security Sleeve Tool
$ 11.00
s-200
Also works great to tighten or lossen F connectors in small work
spaces. Features durable machinedheat-treated steel.
4 Tool is 2.73’’ long
Low/High Pass Filters
4 A variety of low, high-pass and single channel deletion filters
are available in this style. Call today to talk to our expert
sales staff.
4 UL listed #KDSH.E224839
Lock Box with Front Cover
Lock Terminate Tool
10GA Ground Wire
10solgrn
$ 125.00
ltt-4
4"
$ 11.00
ltt-7
7"
$ 12.00
4 Solid steel spring ears
apb1218
12" x 18" x 8"
$ 68.00
apb1824
18" x 24" x 8"
$ 89.00
apb2626
26" x 26" x 8"
$ 114.00
4 Durable, long lasting & easy to use
4 500 foot reel
4 Green color insulation
4 Solid copper conductor
Lock Box Lock Bracket
Notch Filters
ETN/emn-*
Security Shield
ss-1d
$ .20
Call for Pricing
4 A variety of low, high-pass and single channel deletion filters
are available in this style. Call today to talk to our expert
sales staff.
APLB
$ 2.48
4 Pad for use in lock box
4 Set includes bolt and nut
4 Necessary with lock box
Security shields are used to protect “F” connectors on taps, splitters,
converters and ground blocks from unwanted tampering.
4 Die cast brass
43
Grounding
ltt-4
Signal
distribution
Use the EZ-RJ45® Crimp Tool with the
EZ Connector below. You can find more about
the EZ-RJ45 on p. 36, part # 100004.
100 Gardner Bender Coax Wire Staples
$ 10.00
PSG-100
100 4" Black Cable Ties
ct4-18cow
white
$ 1.35
ct4-18c9
black
$ 1.35
FC-D
100 Fast Clips for Single Coax
ct7-50cow
white
$ 1.65
ct7-50C9
black
$ 1.65
Wire Management
black
$ 4.99
100 11" Cable Ties
fc-s-wh
white
$ 4.99
CT11-50COW
white
$ 3.50
CT11-50C9
black
$ 3.50
4 Works with solid or stranded wire
4 FCC compliant, UL rated
4 Use in category 3, 5, 5E compliant data networks
4 Easy to verify wire sequence
4 Faster terminations
fc-D
black
$ 5.69
100 14" Cable Ties
fc-D-wh
white
$ 5.69
CT14-50COW
white
$ 3.50
CT14-50C9
black
$ 3.50
white
$ 4.63
100 24" Cable Ties
CT24-175k9
4 Through holes allow wire pairs to be inserted through front
of connector
4 Simple one piece design... no bars or liners
fc-s
100 Fast Clips for Dual Coax
$ .55
100003
100 7" Cable Ties
FC-S
Platinum Tools EZ RJ45 Connector
60 Gardner Bender Service Entrance Staples #6
6C Keystone Jack
310-106IV
ivory
$ 1.86
310-106wh
white
$ 1.86
310-106BK
black
$ 1.86
310-120or
orange
$ 2.50
310-120wh
white
$ 2.50
310-120bk
black
$ 2.50
310-120bl
blue
$ 2.50
$ 10.00
GSE-505
300-168
300-164
4 Conductor 6 x 8 RJ11 Modular Plug
$ .10
300-164
8 Conductor 8 x 8 RJ-45 Modular Plug
Adhesive Backed Cable Tie Mount
acmb11c
bag of 50 (white)
$ 3.00
acnb11c-0
bag of 50 (black)
$ 3.65
44
$ .19
300-168
CAT5E Keystone Jack
Signal
distribution
DIRECTV®
&
DISH Network
APPROVED!
Base
Phone T Adapter
310-420Iv
ivory
$ .46
310-420wh
white
$ .46
wp-1f-iv
wp-2f-iv
200-254iv
wp-1f-1ph-iv
wp-2f-1ph-iv
310-110WH
310-202WH
310-203WH
310-204WH
Extension
Wireless Phone Jacks for Modems
px441
Base & extension
$ 39.00
px442
Extension only
$ 25.00
4 Turns any AC outlet into a phone jack to which a modem
may be connected
4 Avoids costly, time consuming, and difficult installations
4 Works with multiple set-top boxes, computers, or internet
appliances
Phone Cord Splice/Coupler
4 65,000 security codes for maximum privacy
Wall Plates
Wall Mounted Phone Jack
$ .29
sj-4c
Wall Phone Plate
300-094wh
white
$ 1.05
300-094iv
ivory
$ 1.05
White CAT5 Keystone Jack
310-420iv
ivory
$ .46
310-420wh
white
$ .46
wp-1f-wh
White 3 Ghz Single F Plate
$ .30
wp-1f-iv
Ivory 3 Ghz Single F Plate
$ .30
wp-2f-wh
White 3 Ghz Dual F Plate
$ .49
wp-2f-IV
Ivory 3 Ghz Dual F Plate
$ .49
200-254wh
White Wall Plate with Hole
$ .21
200-254IV
Ivory Wall Plate with Hole
$ .21
wp-1f-1ph-wh
White 1-F/1 Phone Plate
$ .40
wp-1f-1ph-iv
Ivory 1F/1 Phone Plate
$ .40
WP-2F-1PH-wh
White 2F/1 Phone Plate
$ .59
WP-2F-1PH-IV
Ivory 2F/1 Phone Plate
$ .59
Keystone Wall Plates (in white and ivory)
25 Foot Ivory Phone Cord
310-201*
CAT5E Keystone 1-hole plate
$ .97
310-202*
$ .97
pc-25-iv
$ .60
310-203*
$ .97
PC-25-gr
$ .15
310-204*
$ .97
45
Wall Plates
$ .19
ph-coupler
Signal
distribution
CyberPower 6-outlet Surge Protector
$ 8.25
615
4 Protection from lightning induced surges and spikes
4 Designed for: personal computers, DVDs/Stereos, TVs and
CD Players
CyberPower 8 Outlet Surge Protector
Tradewind TM Power Strip
$ 24.95
880
Contents include 880 surge protector, 4’ coaxial cable, 6’ RJ-11 patch
cord, as well as 6’ RJ-45 patch cord
4 8 surge protected outlets
4 Lifetime connected equipment guarantee up to $45,000
4 4 transformer spaced outlets
4 Includes: EMI / RFI noise filter, six surge protected outlets,
2 transformer spaced outlets, 4’ power cord with right
angle plug
4 EMI / RFI noise filter
Surge Protection
4 Mounting slots and brackets included
6 Outlet Surge Protector
CyberPower 8 Outlet Surge Protector
$ 34.95
890
4 1 transformer spaced outlet
Contents include 890 surge protector, 4’ coaxial cable, 6’ RJ-11 patch
cord, as well as 6’ RJ-45 patch cord
4 4' power cord
4 Keyhole mounting slots
4 $ 20,000 connected equipment warranty
4 4 transformer spaced outlets
4 Lifetime warranty
4 EMI / RFI Noise Filter
4 6' power cord
4 Lifetime warranty
46
12 Outlet Metal Power Strip, 4feet in length.
Perfect for use with: Electronics, Computers, Audio/Video, Appliances and Power Tools.
4 6 ft. 14/3 AWG, SJT power cord
4 Surge protection up to 400 joules
4 Lifetime warranty
$ 8.95
$ 30.00
4 Master on/off switch with15 amp resettable circuit breaker
4 6' power cord
610
PS-48
AUDIO/VIDEO
Digital Mixers
48
Amplifiers
49-50
iR Control
51-52
Audio / Video cables
53
Television mounts
54
Audio / video
4 Automatic Resonance Control (ARC)
4 Advanced new measurement and processing algorithm
improves speech intelligibility and sound quality in facilities
with challenging acoustic environments
4 Automatically identifies room mode frequencies and applies
an inverse response curve to compensate for the measured
room response
4 Modular design allows versatile configurations — up to 8
inputs and 8 outputs (modules not included)
4 Essential audio processing tools — compressors, gates,
crossovers, multi-band filtering, parametric, high/low-pass,
all-pass and notch filters, horn EQ, high/low shelving and
output delay
4 Eight bus matrix allows flexible input-to-output signal routing for zoning or room-combining
TOA Modular Digital Mixer
®
DPk1
Call for Pricing
Digital Mixers
The DP-K1 DIGITAL MIXER / PROCESSOR is the ideal solution for a
wide variety of installed sound applications including houses of worship, sports facilities, convention centers, airports, and many others.
The DP-K1’s modular design supports up to eight mic/line inputs
and eight line outputs with flexible contact-closure remote control.
The advanced new Automatic Resonance Control (ARC) measurement and processing algorithm from TOA, improves speech
intelligibility and sound quality in facilities with challenging acoustic
environments. ARC automatically identifies room mode frequencies and applies an inverse response curve to compensate for the
measured room response.
Additional audio processing tools include multi-band parametric
filters, compressors, limiters, noise gates, crossovers, delays and
ore. Full input-to-output matrixing allows users to store and recall
any input to output combination for multi-zone or room-combining
applications. The unit is programmed via PC control software and
includes a built-in network interface for remote access. The DP-K1
is covered with a five year product warranty.
4 Rack-mount digital mixer / processor for installed sound
applications such as houses of worship, sports facilities,
convention centers, airports, and others
48
TOA® 9000 Series Digital Matrix Mixer/Amplifiers
a-9060dh
60 WATT
Call for Pricing
4 Network interface for remote programming
and maintenance
a-9120dh
120 WATT
Call for Pricing
4 PC software for offsite programming and archiving settings
m-9000
240 WATT
Call for Pricing
4 Flexible remote control
Optional module
a-9060dh
4 Up to twenty-four programmable switch inputs for activation
of memory, volume up/down, channel on/off and stereo
input selection
4 Up to sixteen programmable relay outputs for activate during memory, channel on/off, input status and stereo input
selection
4 8 internal memories for storage and recall of different signal
routing and parameter configurations
4 Input and output channel metering
4 Eight front panel memory select buttons
4 Front panel lock protects settings
4 Cooling fan ensures continuous reliable operation
4 Flexible mixer/amplifiers for sound reinforcement, paging
and background/foreground music distribution
4 Six switchable Mic/Line inputs, balanced, with mic trim and
switchable 24 VDC phantom power
4 Two auxiliary inputs, unbalanced, with dual-RCA jacks
4 900 series module slot accepts 900 series plug-in modules
for custom system configurations
4 25 V, 70.7 V and 4 ohm speaker outputs
4 Transformer isolation for telephone paging (Input #1)
4 User configurable auto-mute function with sensitivity
adjustment
4 Five-segment LED power meter
4 Built-in rack-mount brackets (3 RU)
4 Remote master volume (via 10k OHm pot) and remote
turn-on
4 Five year warranty
4 Insert jacks for connecting external signal processor
Pace Electronics
stocks a broad range
of Toa® products.
To find out more call
us or visit online!
4 Protection circuitry prevents potential damage from overloads, short-circuit and overheating
Audio / Video
bg-1015
A-912MK2
a-724
TOA® 6-Channel Mixer/Amplifiers
a-706
60 WATT
$ 390.00
a-903MK2
30 WATT
$ 290.00
bg-10
10 WATT
$ 155.66
a-712
120 WATT
$ 442.00
a-906MK2
60 WATT
$ 416.00
bG-1015
15 WATT
$ 166.00
a-724
240 WATT
$ 593.00
a-912MK2
120 WATT
$ 501.00
bg-1030
30 WATT
$ 239.00
bg-1060
60 WATT
$ 338.00
bg-1120
120 WATT
$ 369.00
4 Flexible mixer/amplifiers for sound reinforcement, paging
4 Modular design allows fast and easy custom configurations
for unmatched flexibility
4 Six switchable Mic/Line inputs, balanced, with mic trim and
switchable 24 VDC phantom power
4 Eight module slots accept any combination of TOA plug-in
modules
4 Two auxiliary inputs, unbalanced, with dual-RCA jacks
4 25 V, 70.7 V and 4 / 8 ohm speaker outputs
4 Integrated mixer/amplifiers for sound reinforcement, paging
4 900 series module slot accepts 900 series plug-in modules
for custom system configurations
4 Dual mute bus permits multiple levels of paging priority
using optional mute-type modules
4 25 V, 70.7 V and 4 ohm transformer-isolated speaker outputs
with screw terminal connector and protective cover plate
4 25 V, 70.7 V and 4 ohm speaker outputs
4 Remote master volume terminals for control with an external
10k ohm linear-taper potentiometer
4 Two low impedance microphone inputs, balanced, transformer-isolated with XLR-F connectors (expandable to 4)
4 Low cut switch to limit low frequency response
4 Three auxiliary line inputs, unbalanced with RCA connectors
4 Auxiliary output for connecting an external mixer or
recording device
4 Hi-z mic/phono input (switchable), unbalanced with RCA/
screw terminal connectors
4 Insert jacks for connecting external signal processing
4 External mute terminals for switch closure override of inputs
3-5 with adjustable mute depth
4 Transformer isolation for telephone paging (Input #1)
4 User configurable auto-mute function with sensitivity
adjustment
4 Five-segment LED power meter
4 Remote master volume (via 10k OHm pot) and remote
turn-on
4 Bridging input/output for input expansion or system
combining
4 Protection circuitry prevents potential damage from overloads, short-circuit and overheating
4 Protection circuitry prevents potential damage from
overload, short-circuit and over-heating
4 Booster and tape outputs for connecting external equipment
4 +24 VDC input for connection to external power source
Amplifiers
4 Protection circuitry prevents potential damage from overload, short-circuit and overheating
49
Audio / video
Xantech® 291 Series Hidden Link IR Receivers
p-912mk2
TOA® Power Amplifiers
TOA® Network Audio Adapter
p-906mk2
60 WATT
$ 361.00
nx-100
p-912mk2
120 WATT
$ 437.00
p-924mk2
40 WATT
$ 760.00
The NX-100 Network Audio Adapter can transmit high-quality audio
signals and such control data as serial data over IP networks, such
as LAN or Internet, in real time. It is especially useful when transmitting audio signals to remote locations, as Internet use keeps running
costs lower than the use of dedicated lines. With the use of an optional rack-mounting bracket, it can be mounted in an EIA Standard
rack (1 unit size).
4 Modular single-channel power amplifiers
4 Input module slot accepts most TOA plug-in modules for
custom system configurations
4 25 V, 70.7 V and 4 / 8 ohm speaker outputs
$ 1,024.86
The 291 series are small, shelf-top IR receivers with a multitude of
applications. Use them as an inexpensive method of repeating IR
commands when wall mounting an IR receiver is not practical. As
with all Xantech IR receivers, the 291 can tie into multi-room IR extension systems.
4 Attractive case for shelf-top locations
4 Red talk-back LED tests system for correct wiring as well as
indicating infrared reception
4 781RG Power Supply required
4 Nominal reception angle: 45 degrees off axis
4 Attached 7 foot cable and 3.5 mm stereo mini plug permits
direct plug-in to Xantech connecting blocks
291-10R/P
4 Direct input for connecting an external mixer or other source
$ 37.71
4 Selectable input sensitivity to accommodate high or low
input levels
4 Use for general applications. Includes a CB12 Connecting
Block
4 Low cut switch to limit low frequency response
4 IR modulation frequency bandwidth: 30–100 kHz
4 Protection circuitry prevents potential damage from oveload, short-circuit, or over-heating
4 Nominal reception range: > 30 feet
291-80
4 Five year warrant
$ 60.57
4 CFL/LCD Friendly IR Receiver
Dual Microphone/Line Input Module
$ 111.71
D-001t
4 This version of the 291 has been specifically designed to
have great immunity to many sources of infrared interference and to have exceptional reception range
4 IR modulation frequency bandwidth: 30–60 kHz
4 Adjustable IR carrier frequency: 32 to 56 kHz
4 Nominal reception range: > 70 feet
Amplifiers
Xantech® Xtra Link2 Package
Digital Sound Level Meter
33-2055
172-94/RP
$ 56.82
4 For precise, accurate sound readings
4 Ideal for fine-tuning the audio response on your PA or
stereo system
4 3 digit sound level readout with 21-dot analog bar for pinpoint accuracy
50
Telephone Zone Paging Module
$ 99.57
zp-001t
$ 55.71
The complete 172 Xtra Link2 package includes 291 Infrared receiver,
injector, coupler, 284M Dual Blink IR Infrared emitter, 781RG DC
Power Supply, two Coax jumpers with RF connectors.
Audio / Video
Xantech® 780 Series J-Box Receivers
$ 171.43
780-95
J-Box IR Receiver. The 780 has been the choice of custom installers
for years. Use it for general applications at lowest costs.
4 Plasma Friendly J-Box IR Receiver
4 Rejects interference from plasma
displays, direct sunlight and fluorescent
tube lights
Xantech® Dinky Link
4 Range: 50 feet
4 Has talk-back LED for system testing
4 Works in normal three-wire mode
requires 781RG
Power Supply
480-80b
$ 72.00
480-80w
$ 72.00
4 Non-visible, high output version
480-85s
$ 80.00
4 New deep purple Lexan shell
480-85b
$ 80.00
4 New improved clear adhesive film included on
emitter housing for attachment to IR window of
controlled device
Miniature IR receiver that features surface mount technology. The
480 Dinky Link was originally developed in response to requests from
many of ourcustom installers for a small, inconspicuous receiver. It
was designed for placement in very tiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a
grille and still receive the IR commands up to 20 feet away. If longer
range is necessary, you must drill a 3/8-inch hole in the grille.
4 Extremely small package, 7/16" x 5/16" x 2-5/16" (11mm x
8mm x 59mm)
Xantech® IR Blaster
$ 34.29
380-20
Xantech® Mouse Emitter
4 Works in normal 3-wire mode
282-m/rp
$ 8.00
4 Lead is terminated with a 3.5mm mono mini plug
4 Length of wire: 10 feet
Xantech® Dual Mini Emitter
284m
$ 9.14
Two emitters in series with each other and terminated in a single
3.5mm mono mini plug
4 Length of wire: 7 feet to junction, 3 feet to each emitter
4 Non-visible, high output version
4 Talkback red LED tests system for correct wiring as well as
indicating infrared reception
4 Available in white or black
4 SUN480 Sunscreen filters available separately. Use these to
help with sunlight and stray IR problems
Xantech® Micro Link
Lynx Broadband Video Over CAT5E Cable
040-0139
AV/IR CAT5X-Mitter
$ 55.00
040-0153
AV/IR CAT5 Receiver
$ 55.00
Xantech® Smart Pad 12 Button Key Modulator
$ 36.57
KM-1F
4 It can be used as a single-gang single-bank module or with
source selecting modules for mechanical functions
$ 70.86
490w-00
$ 72.00
Miniature IR receiver that features surface mount technology. The
490 has its electronics housed in a brass cylinder. The “business end”
of the unit is a small round lens. This small receiver is designed to
be placed in very tiny spaces. One example is a small corner of an
equipment cabinet.
4 Standard version, with mini three-conductor 7 ft. ribbon
cable and separate screw terminal block
4 12 basic control buttons
51
IR Control
The Bobcat -AVIR delivers composite video, stereo audio, and infrared control signals on Category 5 or Category 6 cable. It is ideal for
sending satellite or cable TV from central satellite receivers (or cable
set top boxes) to remote TVs using the structured cabling system
rather than coax. The infra-red return path sends channel selection
and other remote control signals back to the set top box.
490-00
Audio / video
Xantech® Controlled AC Outlet
Xantech® Six-Way A/V Distribution Amplifier
$ 72.00
AC1
Control voltage switched outlet. Can be used for AC power management with the control output of any low voltage DC source.
$ 70.86
AV 61
AV 61 gives you the ability to split stereo audio and video signals
six ways without any splitter loss. It also prevents audio distortion by
buffering the sources from the loading effects of several AV receivers
or preamps in a zoned system.
One Zone Connecting Block
789-44
$ 26.29
4 Connects four emitter ports and power supply to all Xantech
infrared receivers and keypads
4 Four parallel emitter ports with 470 Ohm resistors drive four
single or four dual emitters
4 Quick-connect stereo mini jack for IR Receivers that use a
stereo mini plug
4 STATUS terminal for connection of IR Receivers and Keypads
that have status indicator LED’s
4 2.1 mm coaxial power jack
4 Uses either the 781RG or 782-00 power supply
4 Dimensions: 3” x 1 3/4” x 13/16”
(77mm x 45mm x 21mm)
Xantech Remote Gain Control Modulator
®
rgc11
$ 96.00
4 Remote controlled line level gain control
$ 96.00
Mirv1I
4 Ramping volume and/or preset level adjustments
4 Includes plug-in type screw terminals for IR bus connections.
4 Separate mute on and off
4 Servo action causes multiple MIRV1’s to automatically track
each other’s position
4 Loop-through jacks for ‘daisy chaining’ multiple RGC11’s
4 Selectable IR code groups
4 Useful for controlling multiple power amplifiers from a single
preamp
4 Gain: Unity @ Max. V.C.
4 Freq. Response: 5 Hz to 70 kHz ± 3 dB
4 THD: < 0.01% @ 2V out, IEC ‘A’ weighted
4 S/N Ratio: > 96dB re 2V out
4 Requires RC68+ Programmer IR codes for operation
4 LED in knob blinks with knob rotation and also serves as a
system ON/OFF status indicator
4 One nut disassembly for custom painting
4 Knob and plate pre-finished in either white (MIRV1-W) or
ivory (MIRV1-I)
4 Fits standard single gang J-box
781-RG
$ 9.14
4 Regulated 12V DC for most Xantech remote control devices
(marked rating is 12V DC, 200 mA)
4 Powers basic Xantech IR systems
4 Uses 2.1mm coaxial plug
High Current Power Supply
782-00
$ 29.71
4 Regulated, 12V DC, 1.2 Amp power supply
4 Depth behind plate: 2-1/8 inches (54mm)
4 High current supply designed to power a large number of
Xantech devices from a single power supply
4 Power: Receives 12V power from RAT1
4 Uses 2.1mm coaxial plug
4 Includes AC power supply
IR Controls
4 Dimensions: 5-7/8” x 2-3/4” x 1-5/8” (150mm x 70mm x
42mm)
52
Power Supply
Xantech® Motorized IR Volume Controller
&(&.','
16;<)44-:;<15-)6,576-A;--8)/-%7-);14A
;<7+3 16>-6<7:A 57=6<; 5)A )4;7 *- 7:,-:-,
;-8):)<-4A.:75<0-?)44):58)/-
!
> 3035&0%'/356-09)5
> "34%2(*532753003874537)'7-32
> (.867%&0)7-078473@%2(@6:-9)0
> 38271%<&)-267%00)(-27:36)'7-326%003:-2+
*35%32)4)5632-267%00%7-32
> !-2+0)35(38&0):%00%51()4)2(-2+32132-7356-=)
> # #1382761%<&)%(()(%*7)5132-735-6-267%00)(
DVI Cable
> 2'08()6,%5(:%5)*35-267%00%7-3273:33(678(6
Tradewind™ 1 Female RCA to 2 Male RCA
ch-dvi-6
6 ft
1fr-2mr
6 ft
$ .48
Tradewind™ 1
1mr-2fr
$ .48
*-7
Tradewind™ 2-RCA Jacks - 3.5 Stereo Plug
255-038
6 ft
Audio Cable
255-131
3 ft
12 ft
4 Red and white connectors with Gold Fittings
S Video Cable
*-7
*-73
LBS
jmw26*
"LACK
CM
CM
CM
CM
KG
3INGLE
3INGLE
LBS
CM
CM
CM
CM
KG
3INGLE
CM
CM
CM
Tradewind™CM
Stereo Audio/Video
Cable
3INGLE avs-6
3INGLE
CM
6 ft
CM
CM
CM
CM
CM
Sterens® Stereo
Audio/Video
3INGLE
*-73
*-7$
3INGLE
CM
CM
KG
"LACK
CM
CM
CM
CM
CM
CM
LBS
CM
CM
CM
CM
KG
LBS
KG
*-7$3 3INGLE
CM
CM
LBS
CM
CM
CM
CM
KG
$OUBLE LBS
CM
Woofer
Cable
$OUBLE CM
Sub
*-7(3 *-7
*-73
*-7(3
$ 1.20
*-7(
*-7(3
*-7(
*-7(3
$ .50
*-7(
*-7(3
CM
CM
12 ft
CM
CM
KG
KG
LBS
4 Top and front roll out protection
3ILVER
4 Adjustable tilt up to 30° and 360° swivel
"LACK
in two sections allowing for a
4 Mount may be installed
one-person
installation
3ILVER
4 Single or double wall arm, depending on monitor size
"LACK
4 (38&0):%00%51%6237)(
VCR/DVD mounts may be added after monitor is installed
3ILVER
38276 6,-4 :-7, &5%'/)7 6-2+0) 35
4 Includes hardware for installation to wood studs
'1B51C?/>11:?5F185?@5:3?B1>52E41534@
-:0 C50@4 01@1>95:1 9;018 >1=A5>10
3INGLE LBS
;:@-/@A?@;91>->152E;A>1=A5>14 12 Foot CM
Heavy DutyCM
Sub WooferCM
Cable with
RCA ends.
CM
KG
Wood Stud:
?5F19;0525/-@5;:@;25@E;A>9;:5@;>
3INGLE LBS
3ILVER
CM
CM
CM
CM
KG
125 lbs (56.7kg) ,;;0?@A0?$;@45:3-005@5;:-8>1=A5>1052
(single wall arm)
$OUBLE LBS "LACK300 lbs (136.1 kg) 9;A:@5:305>1/@@;C;;0?@A0?
'1B51C
(double wall arm)
CM
CM
CM
CM
KG
-//1??;>EC-88?A<<;>@<8-@1?52?<-::5:3
$OUBLE LBS 3ILVERMetal Stud:
C;;0?@A0?<-31
CM
CM
CM
CM
KG
125 lbs (56.7kg) ;:/>1@1
(single
wall arm,
with use of
wall support plate, page 63)
'1=A5>1?
2-?@1:1>?
$OUBLE LBS "LACK
<-31
(double wall arm with use of wall support plate, page 63)
CM
CM
CM
CM
KG
175 lbs (79.4 kg)
$OUBLE LBS 3ILVER
#1@-8?@A0?'1=A5>1?A?1;2-//1??;>E
Concrete: HDMI CL2 Rated
CM Cable
CM
CM
CM
KG
C-88<8-@1@;?<-:?@A0?<-31
(single wall arm)
$OUBLE LBS "LACK150 lbs (68 kg)
hdpython20
20 ft $ 125.00
'1B51C -//1??;>E 85?@ 2;> +'+
CM
CM
CM
CM
KG
300 lbs (136.1 kg)
(double wall arm with appropriate hardware)
9;A:@?(-21@E18@(1/A>5@E-?@1:1>?
$OUBLE LBS 3ILVER
A9<1>A->0?+501;;:21>1:/5:3(4182
CM
CM
CM
CM
KG
,-88(A<<;>@&8-@1?&;C1>A00EI;5?@
$OUBLE LBS
"LACK
CM
CM
CM
CM
KG
81/@>5/-8(@>5< :?@-88-@5;:);;8?
$OUBLE LBS
3ILVER
<-31
SW-12
CM
800CM
444 7223
| www.paceintl.com
CM
CM
CM
KG
$
14.00
KG
Maximum Load
"LACK
53
Audio/Video Cables
12 ft
CM
Wall Mounts have been used in commercial and educational environ-
ments and can be seen in many high profile applications around the
"LACK
LBS
CM
3INGLE
*-7(
Call for Pricing
world. They provide unparalleled safety and strength in an attractive,
low profile design. The monitor is completely surrounded and held in
place by top and front roll out protection allowing for tilt up to 30°.
LBS
"LACK
Model 2650 may be ordered pre-assembled to save installers time
KG
LBS
3ILVER
and money.
$
1.56
KG
4 Color: black or silver
CM
®
Jumbo 2000® Wall Mount For 13” to 42” sets For years, Jumbo®
3ILVER
3ILVER
$ 1.20
KG
3 ft
CM
CM
Peerless Television Mounts
LBS
LBS
$ 1.15
svhs-12
6 ft
*-7
$ 1.10
*-7(
4 Two F connectors
#OLOR
6 ft
cj-6
22EACH
3HIP
7EIGHT
3INGLE
$ .90
jmw2630-2650
4RAY
$EPTH
*-7$3 svhs-6
Coax Jumper
$ 5.95
(EIGHT
2ANGE
206-273
*&".3'"''*/).-
255-120
Audio / Video
32'5)7)
0&6/+
?5:381 C-88 ->9
0&6
/+ 0;A.81 C-88 ->9 C5@4
-<<>;<>5-@1 4->0C->1 <-31 46-ONITOR 3UPPORT 7IDTH
3CREEN3IZE
!RM
2ANGE
$ .63 *-73
*-7$
RCA-RCA Cable
C-88 ?A<<;>@ <8-@1 <-31 0;A.81 C-88 ->9 C5@4 A?1 ;2
C-88 ?A<<;>@ <8-@1 <-31 )')57%-273',)'/%'78%0"#(-1)26-326:-7,&5%'/)76-=)
Male RCA to 2 Female RCA-/$%,
6 ft
:?@-881>&>;3>-9
1-@A>10&>;0A/@
0&6/+
Model
monitor
screen size
Support
arm
Width
range
hight
range
tray
depth
13"-17"
Single
13.5"- 21"
11.4"- 17.7"
10"
13"-17"
Single
13.5"- 21"
11.4"- 17.7"
10"
19"- 21"
Single
18"- 26"
14.2"- 20.4"
10"
jmw2630
jmw2630s
jmw2640
jmw2640s
38276,-46:-7,75%<%2(:%00%51
jmw2640d
jmw2640ds
jmw2650
jmw2650s
jmw2650ds
jmw2650h
jmw2650hs
jmw2655
jmw2655s
jmw2660h
> (.867%&0)*-;)(35*0%77-07-2+75%<6%6
237)(-2',%57
> 807-40)4)5*35%7)(,30)4%77)52*35
%77%',1)273*"#7375%<
> 2'08()6*%67)2)56*35:33(678(13827-2+> 2'08()6*%67)2)56*35:33(678(13827-2+
C5@4 A?1 ;2 /;:/>1@1 -:/4;>? <-31 237)(-2',%57
)7%0!78(6
0&6/+
> 807-40)4)5*35%7)(,30)4%77)52*35
C5@4 A?1
;2 91@-8 ?@A0? C-88 <8-@1 <-31 %77%',1)273*"#7375%<
r-reach**
18"
Black
18"
Silver
18"
Black
38276,-46:-7,75%<%2(:%00%51
Double
29"- 36"
24.2"- 30.4"
14"
jmw2665h
27"- 36"
Double
29"- 36"
19.2"- 25.4"
14"
37-
Silver
7"4
7"4
25"
Black
jmw2665hs
27"- 36"
Double
29"- 36"
19.2"- 25.4"
14"
25"
jmw2670h
37"- 42"
Double
34"- 41.3"
29.2"- 35.4"
14"
jmw2670hs
37"- 42"
Double
34"- 41.3"
29.2"- 35.4"
14"
25" 25"
jmw2675h
35"- 42"
Double
34"- 41.3"
24.2"- 30.4"
14"
25"
Black
jmw2675hs
35"- 42"
Double
34"- 41.3"
24.2"- 30.4"
14"
25"
Silver
Television Mounts
54
lwb375t
4;;?1@>-E.-?10;:)+?/>11:?5F1
#1-?A>1
18"
Silver
.;@@;9.-?1;2)+@;1:?A>1@4-@@41.-?1C588
18"?5@2A88E;:@41@>-E
Black
Peerless® Slimline
18",;;0?@A0$;@45:3-005@5;:-8>1=A5>10
2E;A Wall Mounts
Silver
lwb530T
Call for Pricing
->1?<-::5:3?@A0?>121>@;C-88?A<<;>@<8-@1?
22.5" Black
<-31
LWB375t
Call for Pricing
22.5"
Silver 2 @41 8;-0 5? 81?? @4-: 8.?
#1@-8 ?@A0
SWM310
Call for Pricing
;>01>@41-//1??;>E-:/4;>?<-31
22.5"
Black
The Slimline® Wall Mounts provide an alternative to the Jumbo
2@418;-05?9;>1@4-:8.?>121>@;
-/$%,
46
4RAY
4RAY
2EACH
4ILT
3ECURITY 4RAY
3HIP
-/$%,
46
4RAY
2EACH
Mount for installations with limited space. These shelf style wall
22.5"
Silver
@4191@-8?@A0C-88<8-@1?<-31
3CREEN
7IDTH
$EPTH
7EIGHT
3CREEN
7IDTH
$EPTH
mounts offer an attractive, low profile design that is unparalleled in
25";:/>1@1'1=A5>1?2-?@1:1>?<-31
Black
,7"
strength
CM
CM
,7"
CM
.ONE 9ES LBS
KG CM
CM
CM
and safety.
;> )+? ;>01>
/;:/>1@1
>1-0E
,7"4
CM
CM
,7"4
CM
9ES LBS
KG CM
CM
CM
25"
Silver
,7"
CM CM CM
9ES LBSCM
KG CM
,7"
.ONE CM
9;018?",;>",)
,7"#"
CM CM
CM
.ONE
9ES
LBS
KG CM
,7"#"
CM
CM
Black
monitor
22.5"'121>@;-//1??;>E<-31?2;>+'+
,7"4
Model
CM
CM
CM
tilt
9ES LBSCM
KG CM
tray
tray
,7"4
CM
screen
reach
security
width depth
9;A:@?.A9<1>3A->0?@>-E1D@1:?5;:75@?
CM
CM
9ES LBSCM
KG CM
,7"4#"
CM
size CM
22.5" ,7"4#"
Silver
-041?5B1?@A05:?@-88-@5;:75@?-21@E?@>-<?
37-
CM CM 37-
CM

LBSCM
KG CM CM
9ES 19"-20"
22"
13"
20.5"
10º
lwb530t
Yes
25"C-88?A<<;>@<8-@1?-:09;>1
Black
37-
CM
CM CM
9ES LBS
KG
37-
CM
CM CM
30"- 36"
**Distance from wall to center of swivel axis
lwb530t
jmw2660hs
Color
25"
lwb375t
CM 25"-27"
CM
24.25"
CM
CM
10.5"
swm310
CM 9"- 13" CM
Silver
>;9
C-88 @; 2>;:@ 1031 ;2 @>-E
'1/@-:3A8->
C-88 ->9
Black
Maximum Load
)-<1>10 C-88 ->9
SWM310
Silver C-88 ->9
)A.A8->
Wood Stud/Concrete:
50 lbs
Metal Studs (w/ togglers)
35 lbs
Metal Studs (wall plate)
125 lbs
LWB375,
Wood Studs
125 lbs
Concrete:
125 lbs
Metal Studs
125 lbs
,3.3'"''*/).-
jmw2650d
4;;?1@>-E.-?10;:)+?/>11:?5F1
#1-?A>1
19"- 21"
18"- 26"
14.2"- 20.4"
10"
Single
.;@@;9.-?1;2)+@;1:?A>1@4-@@41.-?1C588
?5@2A88E;:@41@>-E
19"21"
18"- 26"
14.2"- 20.4"
14"
Single
,;;0?@A0$;@45:3-005@5;:-8>1=A5>10
2E;A
19"- 21"
18"- 26"
14.2"- 20.4"
14"
Single
->1?<-::5:3?@A0?>121>@;C-88?A<<;>@<8-@1?
25"- 27"
24"- 31"
19.2"- 25.4"
10"
<-31
Single
25"27" ?@A0
24"- 31"
19.2"25.4" 8.?
10"
Single
#1@-8
2 @41 8;-0
5? 81??
@4-:
;>01>@41-//1??;>E-:/4;>?<-31
25"- 27"
24"- 31"
19.2"- 25.4"
14"
Single
2@418;-05?9;>1@4-:8.?>121>@;
25"27"
24"- 31"
19.2"- 25.4"
14"
Single
@4191@-8?@A0C-88<8-@1?<-31
;:/>1@1'1=A5>1?2-?@1:1>?<-31
25"27"
24"- 31"
19.2"- 25.4"
10"
Double
;> )+? ;>01> /;:/>1@1 >1-0E
25"- 27"
24"- 31"
19.2"- 25.4"
10"
Double
9;018?",;>",)
25"27"
24"- 31"
14.2"- 20.2"
14"
Single
'121>@;-//1??;>E<-31?2;>+'+
9;A:@?.A9<1>3A->0?@>-E1D@1:?5;:75@?
25"- 27"
24"- 31"
14.2"- 20.2"
14"
Single
-041?5B1?@A05:?@-88-@5;:75@?-21@E?@>-<?
30"36"
29"- 36"
24.2"- 30.4"
14"
Double
C-88?A<<;>@<8-@1?-:09;>1
> (.867%&0)*-;)(35*0%77-07-2+75%<6%6
&.','*)
C5@4 A?1 ;2 /;:/>1@1 -:/4;>? <-31 )7%0!78(6
0&6/+
Audio
/ video
C5@4 A?1
;2 91@-8 ?@A0? C-88 <8-@1 <-31 CM

9ESYes
LBS
KG CM
CM
15" 37-
25"
10º CM .O LBS
KG CM
7"4
CM
11.5"
14.5"

0º/5º/10º
CM
LBS
7"4
.OYes
CMKG CM
>;9 C-88 @; 2>;:@ 1031 ;2 @>-E
'1/@-:3A8-> C-88 ->9
)-<1>10 C-88 ->9
)A.A8-> C-88 ->9
CM
CM
CM
53
4ILT
.ONE

.ONE
.ONE

TOOLS
Hand tools
Ladders / dollies
56-59
60
Power Tools
61-64
Bits / blades
65-67
Screws / anchors
67-68
Insulation / concrete
69
Stapling
70
Wire fishing
71-72
Sealants
73
Lights
74
Cleaning Tools 75
Safety
76
Test Equipment
77-79
Tools
hb01106-g
hb01001-6
Tradewind™ 13" Pry Bar
tcpb13
Tradewind™ Multi Purpose Tin Snips
$ 7.10
Lifetime Warranty
$ 10.25
hb01093
4 Textured rubber grip handle
4 Spring action for fast, effortless cut
4 Full lifetime warranty
hb01001-6
hb01004
Tradewind™ 12" Hacksaw Frame with Blade
Tradewind™ 4" Long Nose Pliers
hb0116-g
tcscf
$ 7.16
$ 4.20
HB01001-6
$ 7.90
HB01001-8
$ 8.10
Tradewind™ 8" Lineman Pliers
hb01004
$ 7.66
4 Black rubber insert on handles for added grip
Tradewind™ 10" Round Cable Cutter
$ 9.83
hb01071
4 Heavy duty tool capable of standing up to the toughest
cable
4 Textured rubber grip handle
Tradewind™ Aluminum Close Quarter Hack Saw
with 10" Blade
tcmsa
$ 4.84
hb02008-10
Tradewind™ 6" Dry Wall Utility Saw
tcwbc
$ 2.95
hb02008-8
Tradewind™ Adjustable Wrench
Tradewind™ 10" Groove Joint Pliers
Hand Tools
hb01126
4 Cushioned grips for added comfort
$ 7.57
hb02008-10
10"
$ 11.58
hb02008-8
8"
$ 8.60
4 Full Lifetime Warranty
4 Dipped handle for added comfort
4 Fine Polished Chromium Nickel finish
4 Commercial grade tool
PVC Pipe Cutter
153-P
4 Rigid Brand PVC Pipe Cutter
4 1¼" to 3½" Plastic Pipe Cutter
56
$ 115.00
Tools
3 lb. Sledge Hammer
sl3
25 ft. Carpenters Tape Measure
$ 14.50
tctm25
Stainless Steel Leatherman Tool
$ 51.35
blast
4 15 tools in one
4 Magnet in the end of the tape to hold it securly in place
when measuring!
4 Lists out the 1/8th" markings to make measurements
quicker and more accurate
4 Needle nose/regular pliers
Tradewind™ 16 oz. Rubber Mallet
HB06006
$ 4.95
4 Leather Case
$ 4.00
4 Wire cutter, Hard-wire cutter, Clip point knife, Saw, Wood/
metal file, Scissors, Large and small screw drivers, Phillips
screwdriver, Ruler - 8" (19cm), Bottle & can opener, Wire
stripper and lanyard ring
Tradewind™ 2 Foot Scaled Level
tclel24
$ 3.69
4 Light weight and durable
Framing Hammer
av20
$ 35.00
Stanley® 35 ft. Fat Max Measuring Tape
$ 32.50
maxtape
4 Reinforced with a 3M industrial thermoplasatic coating for
maximum durability and reduced blade breakage
4 1¼" wide Maylar® polyester film coated blade for superior
durability and easy to read graphics
Tradewind™ 16 oz. Claw Hammer Fiber Handle
HB06003
4 Light weight and durable
chline
$ 6.40
57
Hand Tools
$ 12.00
protape
$ 1.65
100' Chalk Line
30 ft. Carpenters Tape Measure
$ 4.43
tctl9
4 Magnetic side
$ 10.50
Irwin Straight-Line Plumb Bob
20877
4 11 ft. of tape standout for the longest reach
Tradewind™ 9" Torpedo Level
Tools
Zircon TriScanner Pro Wall Scanner
6 Piece Screw Driver Set
$ 23.75
tspsl
4 Deep scan to 11/2" deep
$ 4.66
66-039
4 #1, #0, 1.4, 2.0, 2.4 and 3.0 mm
Mechanical Tool Chest
tchest
$ 32.38
4 Clark 3 drawer all steel Tool Chest
4 Detects wood and metal studs
4 Tough powder coat finish
4 AC wire warning
4 One piece roll formed drawer runners
4 Spotlight pointing system
4 Lockable top patches and Strong carry handle in lid
22 Piece Hex Key Set
$ 11.25
TCHR13
This is a heavy duty set of hex keys in the following sizes:
4 1/20", 1/16",5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32",
1
/4", 5/16", 3/8" as well as 1.5, 2, 2.5, 3,4, 5, 6, 8, 10 mm.
Crescent 70 Piece Professional Tool
$ 46.50
scktset
4 Lifetime warranty
24" Double Traytote Bag
1141
$ 49.95
4 Features 37 pockets - 35 outside and 2 inside
4 Double 11" × 16" multi-compartment plastic trays slide
securely into bottom of bag
4 Pockets for cordless drill, 2-way radio, drill bits, tips etc.
4 Bag dimensions: 24"L × 9"W × 12"H
4 Both SAE & Metric Sizes
4 1/4" & 3/8" Drives
4 72 tooth ratchets require only 5 degrees of swing
Tool Bag Combo
Stanley 3 Piece Wood Chisel Set
$ 9.40
2107738
1107
$ 17.00
4 Includes one black and one tan tool bag
4 ½" - ¾" - 1"
4 Hardened for sharpening
rwM
rws
Hand Tools
Crescent 7 Piece Ratcheting Metric Wrench Set
rwm
8mm - 18mm
12 Pocket Tool Belt
$ 63.00
1429
Crescent 7 Piece Ratcheting SAE Wrench Set
rws
5/16" - 3/4"
$ 63.00
4 These unique wrenches require only 5 degree of swing to
loosen or tighten nuts and bolts
58
20 Piece Screw Driver Set
$ 19.60
60-220
$ 18.95
This heavy duty 12 pocket tool belt is sturdy and durable yet light
weight. The roomy pockets have enough space to carry the tools and
supplies you need on the job. Two hooks are included for hammers
and one of the hooks swivels. There are pockets for your punches
and screwdrivers as well as utility knives, nails, clips and fasteners.
Tools
7" F-Connector Removal Tool
$ 4.78
33-3085
3 Piece File Set
$ 30.00
16070
Platinum Tools® Adjustable Punch Down Tool
4 Made for high density or hard to reach places
$ 47.00
13006
Legendary German quality in this 8" hand file set. This 3 piece file
set includes Bastard Cut and Second Cut files with comfortable
plastic handles for long lasting reliability and ease of use.
4 The primary tool for all telecom and data communications
installers
4 Simultaneously seats and trims wire in 110 and 66 style
cross connects
Tradewind™ Pick and Hook Set
tc2ss
Lifetime Warranty
4 Spring loaded for fast low effort wire seating and termination
Tradewind™ 10" F-Connector Removal Tool
$ 8.35
TW-10FR
$ 2.35
This tool makes it easy to tighten or loosen F connectors in tight
working spaces.
4 The extra long for those hard to reach connectors
4 Bayonet style blade retention mechanism is compatible with
tools and blades manufactured by Harris, Ideal, and others
4 Adjustable low and high impact force settings
4 Spare blade storage compartment in the handle
Tradewind™ Nail Punch Set
0079
/32"
$ 6.00
/8"
$ 6.20
3
0082
1
Tradewind™ Observation Mirror
$ 4.80
tcom
Platinum Tools® T-Handle Punch Tool
$ 7.50
13110C
4 Lifetime warranty
154
Platinum Tools® BIX™ Style Blade
13022
Tradewind™ Cold Chisel
a-7
3/4" wide
$ 3.75
2-3/4" wide
$ 209.00
$ 17.69
This wide and heavy carpet chisel is ideal for routing wires into the
gap between base board molding and the carpet. Blunt edges will
help protect base board finishes.
4 This is a handy device to make hiding cables an easier task
Hand Tools
154
Stud Punch Tool
22280
Tradewind™ Carpet Chisel
Call for Pricing
4 Punches 1 11/32" holes for 1" conduit
4 Punches 'H' studs without damaging flanges
4 Built-in stripper eliminates punch hang-ups
Platinum Tools 66 Style Punch Down Blade
13001
$ 13.95
59
Tools
Tradewind™ Cable Caddie
ch-caddie
$ 24.00
4 Quick Setup
4 Great buy - get one for each of your trucks
Little Giant All-in-One Ladder
FM1506
$ 352.42
10103
Independent tests prove the Little Giant will replace 60-70% of all
portable ladders currently being manufactured. When you buy a
Little Giant, you're getting 24 different ladders combined to make
the world‘s most versatile ladder system.
Little Giant Type 1A Features:
4 Heavy duty aircraft-grade aluminum construction
4 Rated to hold up to 300 lbs.
4 Combines 24 different ladders into one convenient system
4 Lightweight and portable
Louisville® Type 1A Fiberglass Step Ladder
FM1504
4 ft.
$ 121.80
FM1506
6 ft.
$ 156.80
FM1508
8 ft.
$ 225.00
FM1512
12 ft.
$ 345.00
FM1414HD
14 ft.
$ 515.00
4 Complies with all applicable OSHA ANSI A14.2 standards
4 Fiberglass construction
4 Made in the USA
4 300 lb. capacity, FM1414HD has the capacity of 375 lbs.
4 Includes a full Lifetime Warranty
4 Heavy gauge steel hinges
4 Double-rivet step construction
5 Spool B.E.S. Cable Caddie
cc-1200
$ 225.00
Constructed of rugged 1" steel tubing. The Cable Caddy is 43" tall
and can accommodate spools up to 16" wide on solid steel 1/2"
axles. The Cable Caddy features 6 axle positions for unlimited versatility. Also features sturdy 7" rubber wheels.
4 Inside spreader braces
4 Polypropylene copolymer upper boot – Da Boot™ – thick
non-marring thermoplastic elastomer rubber tread is
bonded and mechanically fastened to the upper boot
Forearm Forklift
$ 33.01
7107493
Ladders/Dollies
Tradewind™ Two Wheel Hand Truck
Load Straps 1" × 14' High Strength
8104960
$ 5.65
4 One set (2 straps) of high strength
ratcheting load straps
60
TCWT40
Shoulder Dolly
$ 49.38
sdolly
4 Use your shoulders rather than your back to move heavy
loads
$ 22.35
4 Tradewind two wheel cart
4 This a is heavy duty cart that works great both heavy and
light but bulky boxes and equipment up to 250 lbs.
4 Solid tires
Tools
DeWalt Heavy Duty 7.2V Cordless Screwdriver Kit
DW920K-2
Call for Pricing
4 Compact size & weight, only 3.0 lbs.
DeWalt Heavy Duty ½" (13 mm) Reversible Right
Angle Drill Kit
DW120K
Call for Pricing
Includes: DW120 drill, chuck key, chuck key holder and kit box
DeWalt 18 Volt Hammer Drill/Driver Kit
dc988
Call for Pricing
4 Adjustable two-position handle
4 120VAC, 7.0 Amps
4 ¼" hex-drive quick release chuck
4 3 Speed 400/600/900 rpm, 9.75 lbs.
4 Extended life switch and electric brake
4 100% ball and roller bearings
4 DeWalt built high torque motor
4 Adjustable clutch torque control
4 5 position side handle
4 (2) XRP extended run time batteries
Includes: driver, 1 hour charger, 2 XRP batteries, double sided screwdriver bit, side handle and carrying case.
4 Exclusive 3-speed transmission
4 Kit includes: DW920 screwdriver, charger,
(2) batteries, screwdriver bits and kit box
4 1/2" ratcheting carbide jaw chuck
4 Maximum job site durability and reliability
DeWalt Heavy Duty 1/2" 18 Volt Cordless
Compact Drill/Driver Kit
DC759KA
Call for Pricing
Includes: Drill/Driver, 1 hour charger, (2) 18 Volt battery packs,
double ended screwdriver bit and kit box.
4 Compact size fits into the tightest conditions
4 High performance motor delivers 450 inch-pounds of
maximum torque
Includes: Drill, Saw, 2 XRP Batteries, 1 Hour charger, Screwdriver bit,
Blade, side handle and carrying case.
DC987 18 Volt Cordless ½" Drill/Driver:
4 High torque motor: 500 in-lbs maximum torque
4 3-Speed transmission
DeWalt 18 Volt 4-Tool Combo Kit
4 ½" metal ratcheting chuck with carbide jaws
dw4kit-2
Call for Pricing
4 DC385 18 Volt Cordless Reciprocating Saw
4 Heavy duty XRP ½" 18V Cordless Hammer Drill
4 Keyless blade clamp
4 Dual speed range for optimal performance: 0-450/0-1,500 RPM
4 0-2,900 spm
4 Heavy duty XRP 18V Cordless Reciprocating Saw with
keyless blade clamp
4 1/2" single sleeve ratcheting chuck for tighter Bit grip
4 1" stroke length
4 Heavy duty XRP 6½" 18V Cordless Circular Saw
4 This tool complies with OSHA standards
4 Lever action keyless blade clamp
4 Heavy duty 18V Flexible Floodlight
4 Electric brake for greater control
4 2 Batteries, 1 hour charger and kit box
61
Power Tools
4 Lightweight 5.2 lbs., minimizes user fatigue
DeWalt 18V Cordless Reciprocating Saw and
Cordless Drill Kit
DC987KA
Call for Pricing
Tools
DeWalt 7.2V - 18V 1-hour Vehicle Charger
dw9109
Call for Pricing
4 The perfect companion for charging batteries on site.
DeWalt 3/8" 18 Volt Right Angle Drill/Driver Kit
DW960K-2
Call for Pricing
dw9155
dw3578
DeWalt Carbide Blades for DeWalt Circular Saws
dw9155
6½"
$ 15.27
dw3578
7¼"
$ 13.00
4 Dual range VSR 0-500 RPM / 0-1500 RPM, 4.7 lbs.
4 3/8" keyless ratcheting chuck
4 Multi-position rubber coated paddle switch
4 Fan cooled motor with electric brake
4 (2) High capacity XRP Batteries, extended run-time
batteries
Kit Includes: DW960 right angle drill/driver, 1 hour charger (input
voltage 120VAC, 60Hz, 2.0 amps), (2) batteries, screwdriver bit and
kit box.
DeWalt Heavy Duty XRP 18V Battery
dc9096
Call for Pricing
4 Fits all DeWalt 18 Volt cordless products
DeWalt High Performance Saw Blades
DW4802-25
$ 40.00
4 Bi-Metal reciprocating saw blades
4 25 Pack of 6"blades
6" DeWalt High Performance Bi-Metal
Reciprocating Saw Blade
DeWalt Corded Heavy Duty 1/2" Single Speed
DW4802
Hammer Drill
Power Tools
dw511
Call for Pricing
DeWalt Heavy Duty Electrician's Hole Saw Kit
d180002
Call for Pricing
4 8 piece bi-metal hole saw kit
4 ¼", 7/16", 7/8", 11/8", 13/8", 1¾", 2", 2½"
62
$ 2.20
Replacement reciprocating saw blade for rough wood cutting
Tools
Bosch 10.8 Volt Screw Gun
Bosch 10.5 Volt Drill Kit
Call for Pricing
ps20-2
Bosch 4 PC 18V Cordless Kit
cpk40-18
Call for Pricing
4 (2) 10.8 Volt batteries with 30 minute charger
4 Quick Change Chuck
4 Circular saw
4 Adjustable clutch
4 Reciprocating saw
4 Variable speed trigger
Call for Pricing
PS10-2
4 (2) 10.8 Volt Litheon™ batteries with 30 minute charger
4 Carrying case
4 2 - 1.5" (38 mm) Power Drive bits
4 90º articulating head
4 Electronic clutch
4 Hammer drill
4 Variable speed control
4 Light
4 Blue Core baterries
4 Dual charger
Bosch 30 Minute Dual Bay Charger
bc230
Call for Pricing
4 Easy to read icons
Bosch Variable Speed Jig Saw
Call for Pricing
1584vs
Bosch 18 Volt Drill/Hammer Kit
13618-se
4 Charges battery models: BAT025, BAT06, BAT031, BAT040,
BAT 043, BAT045, BAT048, BAT100-BAT299
4 5.0 Amps 500-3,100 SPM
Call for Pricing
4 (2) 18 volt batteries with 1 hour charger
4 Keyless chuck
4 Forward/Reverse
4 Tether hook
4 Side handle
4 Extra large soft sided case with 22 pockets
4 Low-vibration design - extremely smooth operation
4 4-stage orbital action - adjusts blade motion to match
workplace and task
BC004
4 Variable speed control
4 Rotating handle
4 3-position dust blower
4 Low position roller guide
BC006
Bosch 1-Hour Battery Charger
bc004
Call for Pricing
Bosch 1-Hour Automotive Battery Charger
bc006
Call for Pricing
63
Power Tools
4 Adjustable clutch and variable speed trigger switch
4 Tool-less blade change system makes for fast and easy
blade changes
Tools
Bosch Blue Core18 Volt Battery
da400lr
Call for Pricing
4 Up to 50% Longer Life
4 Bosh BlueCore™ cooling rods absorb the heat inside the
batteries
4 Battery cells last longer because they stay cooler
4 For Models: 33618, 32618, 13618, 52318, 53518, 1162K-24,
3453-01, RZ18V
RotoZip Premium Cut Off Kit
Call for Pricing
rz20-2100
Makita Heavy Duty ½" Right Angle Drill
Call for Pricing
da400lr
4 Includes dry diamond cut off wheel for tile
4 Wrench-less bit change
4 Variable speed
4 LED work light
4 Reversing switch
4 Dust sealed switch
4 Auxiliary handle (side grip)
4 Soft sided carry case
4 Use with or without the angle attachment
4 High and low speed drilling capability
4 Molded carrying case
RotoZip Cutting Tool Kit
Bosch 3 in 1 Radio, CD, and Battery Charger
pb10-cd
Includes 3 Zipbits and wrench, and Zipbit case.
4 Remote controlled jobsite radio/CD player with 4-way GFCI
Power Outlet
4 CD Player with anti-skip technology and MP3/CD-R/RW
compatible
Hitachi 7¼" Circular Saw
4 Charges Bosch battery packs
c75b
4 Custom Bass and Treble control, four preset EQ settings
4 Advanced digital tuner with 20 FM presets
4 Auxiliary input for MP3 player
Power Tools
4 Radio and CD player operates on Bosch battery packs
- 12V-24V
4 12 Volt DC power outlet ideal for charging cell phones
Call for Pricing
4 Will do 0 to 90 degree cuts
4 Professional commercial grade with extra heavy duty cord
4 Easy alignment for accurate cutting
1 RotoZip Duracut ¼" Bit
4 Built in rule on saw guide
rz250
4 Includes a roomy carry case
4 Aluminum roll cage protects unit from a 10 ft. drop
For Cement
$ 8.70
5 RotoZip Sabrecut 1/8" Bits
sc5
4 Large illuminated digital display for easy viewing
For Wood and Plastic Siding
$ 5.65
10 RotoZip Guidepoints 1/8" Bits
4 Sealed buttons, speakers, battery chamber to protect unit
from dust and weather
64
Call for Pricing
rz05-1100
Call for Pricing
gp10
For Dry Wall
$ 6.75
Tools
FLM3818
FLM1254
B.E.S. Masonry Flexible Drill Bits
Wood Owl 6" Auger Bit Tri-Cut Design
03703
3
/8" × 6"
$ 8.30
FLM31618
3
/16" × 18"
$ 13.50
FLM3818
3
/8" × 18"
$ 15.00
03705
½" × 6"
$ 8.37
Wood Owl 18" Auger Bit Tri-Cut Design
03707
5
/8" × 6"
$ 8.40
03803
3
/8" × 18"
$ 18.85
FLM1248
½" × 48"
$ 18.35
03709
¾" × 6"
$ 9.00
03805
½" × 18"
$ 19.45
FLM1254
½" × 54"
$ 18.72
03711
7
/8" × 6"
$ 10.25
03807
7
/8" × 18"
$ 20.70
FLM1272
½" × 72"
$ 19.29
03713
1" × 6"
$ 11.50
03809
¾" × 18"
$ 23.05
03715
11/8" × 6"
$ 14.20
03811
7
/8" × 18"
$ 25.60
03717
1¼" × 6"
$ 15.40
03813
1" × 18"
$ 27.30
03718
13/8" × 6"
$ 16.95
03815
11/8" × 18"
$ 33.25
$ 18.25
03817
1¼" × 18"
$ 38.15
03818
13/8" × 18"
$ 43.75
03819
1½" × 18"
$ 46.00
03719
1½" × 6"
4 For fast cutting clean holes in wood
4 For fast cutting clean holes in wood
¾" × 54" Flexible Auger Mag Bit
$ 35.40
48-13-8275
brd1224
B.E.S. Auger Flex Bit with Replaceable Head
fib1236
½" × 36"
$ 16.96
fib1248
½" × 48"
$ 16.96
FIB3448
¾" × 48"
$ 22.25
fib1254
½" × 54"
$ 17.57
FIB3454
¾" × 54"
$ 22.05
fib1272
½" × 72"
$ 18.40
FIB5872
5
$ 19.00
/8" × 72"
brd3824
FLX1224
brd3848
FIBH34
B.E.S. High Speed Steel Flex Bits
FIBH58
BRD1224
½" × 24"
$ 28.60
B.E.S. Auger Flex Bit with Replaceable Head
FLX1224
½" × 24"
$ 17.30
brd3824
3
/8" × 24"
$ 19.20
fibH12
½"
$ 6.99
FLX3836
3
/8" × 36"
$ 13.50
brd3848
3
$ 19.90
fibH34
¾"
$ 8.35
FLX3872
3
$ 17.50
fibH58
5
$ 7.64
/8" × 72"
/8" × 48"
/8"
65
Bits/Blades
B.E.S. Tru-Point-Brad Point Flex Bit
FLX3872
Tools
B.E.S. 72" Flexible Extension
$ 17.10
FIBEX72
Irwin Unibit ¼" - ¾"
$ 42.25
59003
Forstner Drill Bit Kit
$ 50.00
fbs1016
4 Hickory Woodworking™
Irwin Long Bits
/8" 16"
$ 5.47
½" × 16"
$ 5.75
88706
3
88708
88710
$ 6.10
5
/8" 16"
4 16 piece Forstner bit set. sizes ¼" through 2 1/8" in 1/8" increments
Irwin Long Quick Change Bit
90106
6"
$ 6.75
90112
12"
$ 7.51
4 Industrial quality - tools fully hardened
4 Use in hand tools or drill presses
4 Use to make: flat bottomed holes, counter bored screws,
decorative edges, pocket holes, pilot holes.
Irwin 8 Piece Spade Bit set
10212
10217
10212
10216
10217
/16" × 4"
$ 4.00
¼" × 4"
$ 4.20
¼" × 6"
Bits/Blades
5
/16" × 6"
$ 4.80
10255
3
/8" × 6"
$ 5.00
10232
½" × 6"
$ 5.20
/8" × 12" Steel Bit
SF3812
66
3
Cobalt 21 Piece Drill Bit Set
$ 35.00
22-8376
1
4 Set includes: bits ranging from /16" to /8" in increments of 1/64"
$ 4.60
10221
3
/8" through 1½"
4 With case
4
Premium Smooth Shank Masonry Drill Bit
3
$ 20.14
341008
10221
3
4 135º drill point
4 Complete with indexed steel case
100 Nail Plates 1 3/8" × 3"
FP159-3
$ 15.40
FP159-6
$ 16.25
4 After drilling a hole through a board, strengthen the area
with a Simpson nail plate.
$ 14.99
Irwin Auger Bits
47412
¾" × 17“
$ 19.55
47416
1" × 17"
$ 23.32
Tools
Wood Owl Self-Feed Wood Bit
48-25-2001
2"
$ 40.00
48-25-2561
9
$ 40.00
2 /16"
Drill Bit and Anchor Kit
$ 2.25
drlbit&anckit
4 Fits ½" Drill Chuck
12 Piece Mainenance Hole Saw Kit
$ 115.00
JEKiT
4 Bi-Metal Variable Pitch Hole Saws & Arbors
4 ¾", 7/8", 11/8", 13/8", 1½", 1¾", 2", 2¼", 2½", 1H, 2H, 4H
4 M-3 cutting edge
4 Variable pitch, positive rake
4 1-1/2" cutting depth
4 Cuts nail-embedded wood, machinable metals, and plastic
Hole Cutter with Dust Catcher
LC-1025
$ 83.00
100 5/16" × 2½" Lag Bolts
ch-lags
/16" head
$ 6.50
½" head
$ 6.50
7
ch-lags-1/2
Clean Installation … Happy Customers! Finally an economically
priced hole cutter that not only can cut a hole in dry wall and wood
from 1¼" up to 10", but it also collects the dust for a clean installation job. Simply set the tool for the size hole that you need, hook it
up to your drill and your ready to go.
50 5/16" × 2" Lag Screw
1122161
Zinc plated hex-head lag screws $ 13.65
Hole Cutter Replacement Blades
lc-3
$ 9.75
HILTI Toggler Bolt without Screws ¼"
374496
Call for Pricing
4 Grip range 3/8" to 35/8" (10mm - 92mm)
Two 12" Replacement Hacksaw Blades
62826
$ 2.75
100 #8 × 1¼" Phillips Pan Head Self Tapping
Screw
1131310
Bits/Blades
4 Save several hours installing fixtures using these newly
designed anchors into concrete block vs. old-fashioned
wing toggles
$ 2.60
67
Tools
32174
32169
100 Course Thread Dry Wall Screws
100 #8 × ½" Self-Tapping Screw
$ 1.50
32123
32169
#6 × 1"
$ 1.50
32172
#6 × 1½"
$ 1.50
32174
#6 × 2"
$ 1.50
100 ¼" Zinc Plated Box Washers
$ 1.89
1133004
25 Metal Anchors for Dish Installs
100 #8 × 1" Screw Self Tapping
32125 $ 1.50
Wafer Head
100 ¼" × 2¼" Tapcon Concrete Anchor Screw
$ 19.99
51542
30 Spring Toggle Bolts ¼" × 4"
100 Tradewind™ Concrete Anchor Screw
100 8 × 2½" Galvanized Deck Screw Exterior
#
$ 2.50
32195
$ 22.00
52010
tw-cmtsc-125
¼" × 1¼"
$ 15.75
tw-cmtsc-175
¼" × 1¾"
16.35
$ 23.00
51671
4 Comes with drill bit for easy use
1131302
100 Plastic Wall Anchors #6-8 × ¾"
1131298
$ 3.05
50976
Screws/Anchors
100 EZ-100 Metal Drywall Anchors
100 Sheet Metal Screws
Pan Head
$ 22.00
50930
1131302
#8 × 7/8"
$ 2.26
1131298
#8 × ¾"
$ 2.20
4 Self-drilling one-piece anchor
4 Versatile anchor accepts #6, #7 and #8 sheet metal screws
Pack of 100 Drive Rings
30-00805
30-00807
/8"
$ 29.00
1¼"
$ 45.00
7
4 For use with the Hilti Power Nailer
68
Tools
Hilti Spray Insulation Foam
CF12
Call for Pricing
Hilti Foam Cleaner Case
CC12
Call for Pricing
Hilti Masonry Drill Bits
Hilti Foam Spray Insulation Kit
338643
Call for Pricing
Includes:
4 Foam dispensing gun & carrying case
4 3 cans of spray foam
4 1 can of cleaner
Hilti Rotary Hammer
Call for Pricing
te-2
4 Rated power: 600 W, rated voltage: 120 V
4 Minimum Distance between wall and hole drilled: 1.2"
sds3/16
3
/16" × 6"
Call for Pricing
sds1/4
1/4" × 6"
Call for Pricing
sds5/16
5
/16" × 6"
Call for Pricing
/8" × 6"
Call for Pricing
sds3/8
3
sds3818
3
/8"x18" Call for Pricing
sds1218
½"x18" Call for Pricing
sds1412
¼"x12" Call for Pricing
sds5818
5
Call for Pricing
/8"x18" 4 Precision hammering action: 0-2400 blows/min
4 Full hammering action: 0-4600 blows/min
Carry Case for Hilti Foam Gun
311111
Call for Pricing
4 Includes, case, drill guide, lubricant
4 Protects Hilti 15" foam gun, compressed foam, & cleaner
canisters
Hilti 42mm Pins
$ 12.50
34-355
4 Pack of 100
4 For use with the Hilti Power Nailer
Hilti 15" Foam Dispensing Gun
259768
Call for Pricing
4 Performance: Fasteners up to 72mm into concrete and steel
Hilti 27" Spray Foam Gun
313187
Call for Pricing
4 Extra long spray foam dispenser for those hard to reach
applications
4 Weight: 2.0 Kg
4 Complies with OSHA regulations
4 Will attach a fastener to either concrete or steel
GBOOST
100 Pack of Cartridges for the DX-72 Power
Nailer
GBOOST
Green (level 3)
$ 11.00
YBOOST
Yellow (level 4)
$ 11.00
69
Insulation/Concrete
Hilti Powder Actuated Power Nailer
DX-72
Call for Pricing
Tools
Spackling Paste
$ 6.29
18768
4 1 quart - quick-drying vinyl spackling
paste
1,000 Staples for the T18
$ 2.50
T18S
Small Wire Tacker
$ 35.00
T18
4 All steel construction lasts and lasts
4 Patented jam proof mechanism
591189-CL
4 Chrome finish resists wear and tear
4 Grooved guide ensures perfect stapling
Tradewind™ 2½" & 4" Dry Wall Knives
$ .95
tcpk24
300 Staples for the T59 Stapler
4 These are nice, tough, quality yet economical and disposable putty knives
95150
¼" (clear)
$ 5.29
591189BL
5
/16 (black)
$ 5.29
591189CL
5
$ 5.40
/16 (clear)
4 For RG-6 and other wire
Insulated Staple Wire Tacker
$ 35.95
t59
591188
4 Shoots Insulated staples that will not damage wire
4 Loose Fit
4 Special coating increases holding power over 3 times
Brazing Rod .125
95150
$ 42.00
Brazing Rod .062 DIA × 20 × 1#
95164
1,000 staples for the T-25
$ 42.00
4 Size .125" × .050' × 20" × 1#; Silfos 15 lbs.; Flow Pt. Temp.
1300F, Liquidous 1475F
t25s
Arrow T-25 Staple Gun
$ 2.50
$ 47.00
t25
4 Professional Grade stapler that will not damage wire
4 All steel construction lasts and lasts
4 Patented jam proof mechanism
Stapling
4 Chrome finish resists wear and tear
4 Grooved guide ensures perfect stapling
Tradewind™ Mud Ring Cover
TW-MRCVR
.062" × 20" FosFlo
95013
Tradewind™ Mud Ring Single Gang
$ 10.00
TW-MR1
4 1 lb. tube of .062" × 20" alloy brazing rod
70
$ 1.05
$ .80
Tools
B.E.S. Glow Fish II Kit
$ 72.60
glf407
B.E.S. Magnafish with Case
5
4 One /32" × 6' with Bullnose/Female tip
$ 89.95
4 Four 5/32" × 4' with Male/Female tips
magnafish
4 Comes with case seen above
Quick and simple wire pulling through existing walls using a magnetic paddle on the outside and a magnetic leader in the inside.
B.E.S. Installation Kit
bbCon 300 Kit
4 Carry Case
4 3' Bullnose Rod
4 Fish Chain and Retriever
4 Attachment kit
4 Wisp head
4 Glowfish set
4 Repair Kit
$ 454.32
B.E.S. 24' Fiber Fish Kit
$ 82.31
fib107
B.E.S. 10' Fish Chain with Magnetic Retriever
fib223
4 Non-conductive fiberglass rod sections ¼" thick
$ 16.10
4 Rods can be screwed together to make longer lengths
for fishing wire in existing walls and attics or across drop
ceilings
4 With a variety of attachments available that make wire fishing easy!
4 15' Telescoping pole with z-tip
4 36" wire bits
B.E.S Flex Bit Steering Guide Tool
4 3/8" × 36" high speed steel flex bit
4 3/8" × 72" high speed steel flex bit
4 ½" × 24" high speed steel flex bit
4 1/16" × 72" extension
fibgud
B.E.S. 6' - 15' Telescoping Pole
$ 83.80
tpf615
4 Flex Bit Steering Guide
4 Telescopes to full length in seconds
4 Zircon Wall Scanner
4 Easy to handle in tight spots
$ 16.00
The Flex Bit Steering Guide is used to guide flexible bits inside a finished wall. This is a must have tool if you are using flexible drill bits.
Wire Fishing
4 Push or pull wires over long spans, suspended ceilings,
crawl spaces & attics
4 Made of non-conductive fiberglass for safety 4 Innovative lever lock system locks sections at any length
4 Sturdy, durable, and lightweight at 5 lbs.
B.E.S. 12" Ball Chain With Insert For Fish Rods
fib519
$ 8.08
71
Tools
B.E.S. Wisp Head
B.E.S. 25 Foot Carpet Fish Tape
$ 45.00
uc25
$ 11.10
fib522
4 For pulling wire across suspended ceilings
Greenlee Steel Fish Tape with Case
438-5
/8 × 50'
1
$ 30.12
4 Heavy duty fish tape for running under carpets
4 Thin, smooth design makes it a breeze to use
1/4" Fish Rod Attachment Kit
B.E.S. 15' Fiberglass Fish Tape
$ 37.00
fibt15
The flexibility of fiberglass is excellent for pulling wire through tight
spaces and around corners.
$ 29.99
fib120
Greenlee Nylon Fish Tape with Case
436-5
/16" × 50'
3
$ 62.00
4 Includes: Directional Tool, Fish Hook, Tips, Pull Ring, Magnet Head, Ball Chain
100 Universal Stud Insulators
22288
pack of 100
$ 20.00
4 Fits all hole configurations
4 Quick, snap-in design
B.E.S. Glow Fish II Repair Kit for /32" Rods
5
glf402
$ 4.50
4 Prevents wire damage
Universal Attachment Kit
$ 28.50
fib520
4 Use for all 3/16" and 5/32" Rods
Wire Fishing
4 Includes: Directional Tool, Fish Hook, Tips, Pull Ring, Magnet Head, Ball Chain
Wire Lube 1 Quart
B.E.S. Screw Tip for Glow Rods
fib512
22290
$ 7.95
$ 15.00
4 Pull wire easily and safely through all types of conduit
4 Greaseless, non-toxic
4 Suitable for optic wire
72
Tools
5.3 oz. Tube of 825 Silicone Sealant
$8.00
CHEMPLEX825-5.3
Specially formulated grease like product containing selected silicone
oils and inert silica fillers. This stiff, tacky compound has excellent
dielectric properties, oxidation resistance and water repellency. It is
essentially non-toxic and non-melting and retains its pliability even
after extended service. Chemplex 825 is resistant to a variety of
chemicals and is compatible with most plastics and rubbers. Chemplex 825 has broad temperature range of -40 to 400°F (-40 to 204°C)
5.3 oz. Tube of 825 Silicone Compound
$6.00
TW-Silicone
Riser Rated Conduit Roll
$ 96.00
DF4X1C
1" × 100'
DH4X1C
1½" × 150'
$ 165.00
DJ4X1C
2" × 100'
$ 160.00
FireStop Spray Foam 24 fl. oz.
$ 43.00
fsic24f
4 The “first” expanding firestop foam
Tube of Silicone 2.8 oz.
1213214
Clear
$4.75
1213222
White
$4.75
3013760
4 Tested to ASTM E-814 (UL 1479)
4 White, orange, red, green and blue
4 Cost effective and simple to use
4 Classified for 1 & 2 hour rated assemblies
4 Architectural grade
4 Conforms to all building codes
4 Interior/exterior
FireStop Silicone 10.5 fl. oz.
4 Non-paintable
FSS-10
$ 10.50
4 Mildew resistant
9 Volt Alkaline Battery
32116
4 Won't crack, shrink or peel
$ 3.45
Small Silver Sharpie
1/2" × 10' Coax Seal Tape
TW-sealtape
$ 7.08
4 5 rolls
4 Expands to fill and seal openings
4 100% silicone sealer
Assorted Color Electrical Tape
$5.95
san-39100
Newborn Brand EZ-Thrust Caulking Gun
$ 1.35
$ 7.25
0111
Sealants
4 Ideal for latex, silicone, adhesive, rubber compound and
polyurethanes
4 EZ-Thrust mechanism
4 Spout cutter
3 ¾" × 10' Bishop Tape
TW-BISHOP
$15.99
4 Seal puncture tool
Large Black Sharpie
4 Thumb release stops caulk flow
n2ptlg11-black
$ 1.20
73
Tools
TW-3LED
Heavy Duty Outdoor Extension Cord
Tradewind™ In-Wall Flashlight
Tradewind™ 3-in-1 LED Head Light
$ 15.99
$ 29.00
CHWI
4 Perfect for wire fishing jobs
4 High intensity LED
CEP-1202
25'
$ 21.00
CEP-1205
50'
$ 35.00
4 Power Flex Outdoor Extension Cord
4 Long lifetime of LED (100,000 hrs.)
4 Moisture resistant molded connectors
4 Adjustable head strap
4 Molded 3-Wire Male Plug
4 Adjustable inclination
4 Meets OSHA requirements
4 Uses 3 AAA batteries
4 UL/CUL Listed
4 Designed for rugged outdoor use
4 Heavy duty 12/3 wire
Fluorescent Work Light
$ 25.00
LIGHT
4 6' three prong cord
maglite1
905-100
4 12 amp grounded outlet
Large Maglite Flashlight
$ 18.55
4 Large machined aluminum Maglite
A/C 2-Prong Ground Adaptor
$.50
4 50 watt light output
4 End spotlight
4 Bulb lasts up to 7 years or 10,000 hours
4 2-Cell D batteries
BernzOmatic® Self-Igniting, Adjustable Torch Kit
23656
Maglite Clip
Magclip
$ 34.50
The Propane Torch Kit is ideal for soldering Copper Pipes up to ¾"
thick, thawing frozen pipes & locks and loosening rusted bolts.
4 Includes self igniting adjustable torch head
$ 4.50
4 14 oz propane tank
500 Watt Halogen Work Light
Lights
4 Spare bulb included
$ 12.77
4 16.4 oz/465 g (1.02 lbs.)
4 Convenient propane cylinder
4 Made in the U.S.A.
4 Includes 2 AA Batteries & Holster
74
80120
4 Recommended for all Coleman propane
appliances
Small Maglite Flashlight with Case
maglite2
Replacement Propane Tank
$ 12.40
PQs45
$ 4.50
Tools
Shoe Covers
Cold Heat Solder Tool
$ 25.00
csbscwpdb
300 Pairs
$ 157.90
The Cold Heat tool’s patented technology creates the heat you
need to solder within seconds, and its cordless design lets you operate it anywhere for light-duty soldering projects. When the tip’s two
electrodes make simultaneous contact with an electrically conductive material such as the work piece (wire lead, terminal, solder,
PCB pad, or other material) this circuit is completed and the high
resistance electrodes generate instantaneous heat at the tip.
CSRSCWPDB
One Pair
$ 25.00
chsg
4 One size fits all
Shop Vac 4.5hp Wet Dry Vac
$ 90.00
952-02-62
4 Includes: extra long 18' lock-on hose system, 2 extension
wands, crevice tool, gulper nozzle, round brush, 12" deluxe
nozzle, 12" squeegee insert, 12" brush insert, cartridge
filter, tool holder, wall mounting bracket
Furniture Pad/All Weather Utility Pad
$ 11.50
401-4852
Work boots were made to be scuffed, not your customers floors. A
furniture pad makes a great surface for your tool box and other tools
when working in a clients home. Measures a generous 6 ft. by 8 ft.
Shop Vac 4.5hp Wet Dry Vac
dc500
$ 115.00
4 Runs off of DeWalt battery packs (12V-18V) or 120V AC
4 High efficiency, washable filter traps 99.7% of dust as small
as 0.3 microns
4 Heavy duty rubber hose
Large Utility Broom
Tradewind™ Dust Pan and Brush
$ 10.70
TCDP
4 Large shop dust pan with nylon brush
10523
$ 19.00
4 Constructed with highest quality
4 100% Natural broom corn
4 For quick & easy clean up
4 Handcrafted for durability
4 2 gallon (7.5 liters) tank
4 5 sews for light to heavy debris
4 Drain port
Cleaning Tools
4 Blower
4 On board storage for hose, cord, crevice tool and wide
nozzle
Tradewind™ Nylon Brush
TCBRUSH
Perfect for quick & easy clean ups
$ 3.50
75
Tools
25dB Ear Muffs
EMUFFS
$ 11.75
4 25 dB Ear Muffs
OSHA Approved Safety Vest
Maintenance-Free Dual Cartridge Respirator
4 Adjustable 3 position head band
$ 20.00
4MH61
4 Ultra soft ear cushions for added comfort
4 Protecting your hearing today means fewer medical bills in
the future!
4 Applications: paint spraying, priming, rust proofing, undercoating, pesticides, etc.
23300
$ 11.00
OSHA approved bright orange safety vest. Keep your team safe and
visible to traffic.
Safety Glasses
SGLASS
$ 5.15
You only have one set of eyes, so protect them with these good
looking safety glasses.
rcan12
respret
10 Filters for Respirator
rcan12
Form Fitted Padded Work Gloves
10 pack
$ 18.00
114
$ 33.00
These form fitted work gloves have excellent grip and dexterity
for picking up small items. Save your skin and carry a pair of these
gloves in every tool box.
20 Retainers for Respirator
respret
20 pack
$ 12.95
White Hard Hat
91295
$11.65
4 Protect your noggin with this OSHA approved hard hat
First Aid Kit - 73 Piece
$ 15.95
9038308
Safety
Tradewind™ 5 pack of Dust Masks
TCMASK5
4 5 pack of paper dust masks with elastic head band
76
$ 2.79
4 Includes critical supplies not found in other kits: trauma
pad, exam gloves, conforming gauze roll bandage, and
more
3 Gallon Cooler with Spout
1683-01-11
4 Drip-resistant spigot & screw-on lid
4 Unique compartmental organizers
4 Durable construction
4 Reviewed and approved by a Medical Advisory Board
exclusively for First Aid only
4 Osha Approved
$26.88
Tools
Triplett Pocket-sized Digital Multi-Meter
$ 19.95
2030-C
Triplett Compact Digital Multimeter
1101-A
$ 34.95
4 Compact DMM with backlit display & temperature test
(probe included)
4 3½" high display digits, with 1999 max. reading
3240
4 Auto/manual ranging
$ 169.99
The PairMaster will check point to point wiring, commonly referred
to as wire-mapping. This tells the user whether or not the cable
pairs, 1/2, 3/6, 4/5, 7/8, are wired correctly at both ends. Green
LEDs indicate pass, Red LEDs indicate fail. If a fault is detected, the
corresponding fault code is displayed on the large, two digit, seven
segment LEDs.
4 The Near End Crosstalk feature checks for excessive A.C.
coupling between each pair in a cable
4 AC/DC volts to 600V
4 AC/DC current to 400mA
4 3½" high display digits, with 1999 max. reading
4 AC/DC voltage to 500V
4 AC/DC current to 10A
4 Overload protection with double insulated case
4 Safety test leads with screw-on alligator clips
Triplett PairMaster LAN Cable Test Set
SNIFF-IT2, AC Voltage Detector
$ 14.40
9601-sniff-it
4 Safe, non-contact Voltage probe
4 Convenient pocket-size
4 Checks 600-800 Volts AC
4 Audible alerts when AC voltage is present
Digital Circuit Breaker Locator
9650
Triplett PairMaster LAN Cable Test Kit
$ 48.00
$ 245.00
4 Triplett breaker Sniff-It
3241 kit
4 Simply plug the transponder into an outlet, run the
receiver over the circuit breaker panel and it will identity
the breaker for that outlet!
LAN Cable Test Set with 16 remote identifiers and carrying case
Complete LAN Cable Testing Kit includes:
4 1 - PairMaster LAN Cable Test Set
4 Audible and visual indication
4 UL listed
4 Lifetime warranty
4 16 - Remote identifiers
4 2 - RJ-45 in-line couplers
Plug Bug - GFCI Receptacle Tester
9610-PLUG-BUG
$ 6.25
4 Detects common wiring problems in standard and GFCI
outlets
4 For use on 110~125 VAC receptacles
Test Equipment
4 120/220 VAC transmitter (250 VAC Max)
4 1 - RJ-45 patch cable (category 5)
4 1 - 9 volt battery
4 1 - Soft-sided carrying case with strap
4 1 - Instruction manual
77
Tools
Triplett TDR Cable Fault Finder
Triplett TDR LAN Cable Fault Finder
3273-LAN TDR
$ 180.00
$ 180.00
3271-TDR
4 LAN cable test set with cable length meter
4 Built-in tone generator for cable tracing
4 Find cable length or distance to fault from one end!
Triplett Fox 2 & Hound 2 Wire and Cable
Tracing Kit
4 Low cost digital cable length meter/TDR
3395-k
4 Built-in tone generator for cable tracing and identification
4 Low cost and simple to use
4 Suitable for testing all types of communication cables
4 Trace wires and cables of all kinds including: electrical wire,
twisted pair, LAN cable, coax cable, multi-conductor cable,
telephone cable, speaker wire, alarm wire and more
4 Compact, ergonomic design, weighs less than 8 oz.
4 The Fox 2: deluxe tone generator with “TrueTrace”
4 Padded cordura holster included
4 The Hound 2 probe: inductive tracer. Streamlined design
allows for better access in those hard-to-reach areas
4 Internal library of 39 standard cable types
4 Digital display shows 7 common wiring faults: shorted pair,
open pair, crossed pair, reversed pair, shield continuity and
split pair
4 Includes 2 remotes for wire mapping
4 Approximate range
4" RJ-45 to RJ-45 Test Lead
79-790
$ 95.40
4 LED intensifies as the tone signal gets stronger
Coax: 6400 ft
Structured wiring: 2500 ft
Telephone cable: 2500 ft
4 Includes cordura carrying case
$ 18.00
4 For use with the Triplett 3273 LAN TDR Cable Fault Finder
6” BNC to BNC Test Lead
79-791
$ 18.00
For use with the Triplett 3271 TDR Cable Fault Finder.
WireMaster XR-5 Cable Tester
$ 107.10
3260-XR-5 4 Tests 5 types of cables; RJ-45, RJ-11, BNC, 1394 and USB
WireMaster 8-Way Coax Cable Mapper
3274
$ 35.99
6" BNC to Alligator Clip
4 The XR-5 Checks for continuity, shorts, miswiring, crossover,
79-792
opens, and grounding
Test Equipment
4 8 remotes with BNC connectors included
4 Tests installed wiring or patch cables
4 Tests for opens and shorts
4 600 ft test distance
4 120VAC line cross protection
4 Remote attaches to main unit
4 Real-time test helps identify intermittents
4 LED’s indicate connections and faults
4 Use to identify coaxial cables in CCTV security and surveillance systems, broadcast TV, residential video systems and
cable TV (with F adapters)
4 Beeper provides audible annunciation of test results
4 Identify any pair of wires such as audio, video, phone lines,
etc using appropriate adapters
78
4 Simple one button test
4 Kit includes: BNC terminator, BNC, RJ-11, & RJ-45 jumper
cables, padded cordura carrying case, 9V battery, instruction
manual
18" BNC to Spike & Pin Clip
79-793
$ 18.00
$ 32.40
Tools
Telephone Test Set With Headset
Test-Um Resi-Talker Test Set
kp312
$ 112.30
lb110
$ 450.15
The Resi-Talker is a self-contained self-powered, portable telephone
test set for use by installers, repair technicians and other authorized
personnel for temporary communications and the operational service and installation of telephone/data lines.
Features:
4 Tone and pulse dialing
4 Microphone mute
4 Continuous line polarity indication (talk or monitor)
4 Electronic ringer
4 Amplified line monitor for volume levels comparable to “off
hook” operation
4 Tone and pulse dialing
4 Modular cord set attachment
4 Microphone mute feature
4 Low battery indicator
4 Last number redial - 32 digits
4 Headset jack
4 Continuous line polarity indication (talk or monitor)
4 Battery-powered monitor mode with auto power-off on
dead lines or when disconnected
4 Electronic ringer
4 Amplified line monitor for volume levels comparable to “off
hook” operation
4 Modular cord set attachment
4 Low battery indicator
4 Headset jack for hands-free conversation
4 Battery-powered monitor mode with auto power off on
dead lines or when disconnected
4 Includes a Home Cabling Toner and Home Cabling Tester
Test Equipment
79
Online Shopping:
Simple and Secure
Pace is dedicated to seeing that your orders are placed promptly. In fact, most orders received
before 2:00 p.m. CST will ship the same day.
Sign-in or Register
products include spec sheets and sales tips for the
product. You can also add them to your cart inside the
detailed view.
If you already have a user account in our online store
you can simply sign in by filling in your username
and password. If you have forgotten your password,
click on the link below the sign in form to retrieve
it by email.
Previewing Shopping Cart: To preview a detailed list
of what is in your shopping cart, click on the “View
Cart” button at the top of the screen. A detailed list
with quantities, pricing, and totals can be seen. You can
also update or change any quantities in your order.
To Register: Click on the link to register for instant access, or fill out the credit application, (pdf) if you would
like terms and conditions to your account. Once registered, you will receive a confirmation e-mail with a
User ID issued to you. You can also set up a tax exempt
status by faxing/mailing a copy of it to the address/fax
number provided in the e-mail.
Shopping
cart
content
Checkout
To checkout, hit the “Checkout button” on the top
navigation bar. There you will see your quantities and
total bill.
total
shipping &tax
search
Browsing & Searching: Once inside the eDistribution page, you can simply browse the categories to
the left, or use the search-field to search by keyword or
part number.
Make Adjustments to Quantities: You can still make
adjustments here to the quantity of items. To see the
changes click the update cart button
next to the
quantity you’ve just changed.
Adding Items to the Cart: Next to every item is a box
with the quantity set to “0” To add one or more of that
item, simply type the number you want to order then
click the
“add to cart” button or press return. If you
want to delete items from your shopping cart, click the
trash button . Quick Clicks
allows you to conveniently store frequently purchased parts you so can
easily access them in the future. To add parts to your
Quick Clicks, click the icon
when browsing through
the parts list.
Change Shipping Info: If the shipping information differs from what is displayed in the Shipping info section,
just click the button to add/edit/delete shipping information. Your shipping & handling costs will change automatically based on location.
Product
categories
shopping
Cart quick view
shipping
info
payment
info
Finalizing checkout: Once the payment Information is
filled out and submitted, you will be re-directed to a
Confirmation page. You should print this as a receipt
for your records.
To view more details on a particular product, click on
the product number or the picture adjacent to it. Many
www.paceintl.com
Terms and Conditions
Same Day Shipping
Business Hours
Orders received before 2:00 PM CST time will be shipped same day depending upon availability.
Monday through Friday 8:00 AM to 5:00 PM Central Standard Time.
Terms
Cash, MasterCard, Visa, Discover, American Express, Bank Wire, Company Check upon approval and
Net 30 days for qualified buyers. Prices do not include freight charges or insurance.
Catalog and Price List Errors
The accuracy of the catalog and prices listed have been carefully checked before printing and we believe
them to be reliable. However, Pace assumes no responsibility for any inaccuracies or typographical errors
that may exist. All information in this catalog is subject to change without notice. Pace is not responsible
for manufacturer’s changes in specifications or pricing.
DOA Policy
Pace stands behind everything we sell. For 30 days from the date purchased from Pace, we will replace
the product (see Return Policy). After 30 days Pace will instruct you how to get your product replaced or
repaired under warranty from the manufacturer.
Damaged Merchandise
Please inspect your shipment for shortages and any damage. By signing for the shipment you are accepting the responsibility for the damaged goods and no freight claim can be collected. If anything on the
shipment appears damaged and you choose to receive the order, put notes on the Bill of Lading. Pace’s
obligation ends when the freight carrier picks up the shipment.
Return Policy
Pace will accept product returns if:
4 the item was not a special order
4 the item is returned in like new condition with all accessories in original box within 30 days of
purchase.
4 proper RA procedures are followed. For an RA number, contact the RA department at
1-800-246-9620 for a Return Authorization number or, go to www.paceintl.com for our RA Return
Form and process.
No returns will be accepted without return authorization. A 20% restocking fee may be assessed.
Prices and availability are subject to change without notice.
The color carrier is generated by the composite video signal. It is located
approximately 3.58 MHz above the video carrier, for channel 2 this would
be located at 58.83 MHz.
Standard CATV frequency matches IRC except for the A-x channels 95-99.
IRC stands for Incrementally Related Carrier and means that the lower edge
of the channel space is numbered such as 54 MHz, 60 MHz, 66 MHz etc.
HRC stands for Harmonically Related Carrier, and means that the video carrier is assigned to the lower edge. Some cable systems use STD cable, IRC,
and some use HRC.
VHF
IF
Low-Band
A channel frequency may be referred by the lower edge (in example 54
MHz), as a range of lower edge to upper edge (54-60 MHz), or by the video
carrier (55.25 MHz). The video carrier is the most commonly used reference
used in tables to match a channel with it's frequency as it is the frequency
measured with RF meters.
T-7
-
7.0000
T-8
-
13.0000
T-9
-
19.0000
T-10
-
T-11
-
T-12
-
T-13
FM-Band
The audio carrier is located 4.5 MHz above the video carrier, for channel 2
it is 59.75 MHz.
CATV accommodates more channels and at lower frequencies than OverThe-Air broadcast TV as it allocates channels every 6 MHz without leaving
frequency gaps that are used for short range radios, and other communication systems. Over-The-Air broadcast TV has gaps before channel 2 (54-60
MHz) between channel 6 (82-88 MHz) and channel 7 (174-180 MHz), and
also between channel 13 (210-216 MHz) and channel 14 (470-476 MHz).
Carrier Frequencies (MHz)
TV
-
Visual
Visual
11.5000
J
23
217.2500
221.7500
17.5000
K
24
223.2500
227.7500
23.5000
L
25
229.2500
233.7500
25.0000
29.5000
M
26
235.2500
239.7500
31.0000
35.5000
N
27
241.2500
245.7500
37.0000
41.5000
O
28
247.2500
251.7500
P
29
253.2625
257.7625
Q
30
259.2625
263.7625
43.0000
47.5000
45.7500
41.2500
R
31
265.2625
269.7625
2
2
55.2500
59.7500
S
32
271.2625
275.7625
3
3
61.2500
65.7500
T
33
277.2625
281.7625
71.7500
U
34
283.2625
287.7625
81.7500
V
35
289.2625
293.7625
87.7500
W
36
295.2625
299.7625
4
5
4
5
67.2500
77.2500
6
6
83.2500
A-5
95
91.2500
95.7500
AA
37
301.2625
305.7625
A-4
96
97.2500
101.7500
BB
38
307.2625
311.7625
A-3
97
103.2500
107.7500
CC
39
313.2625
317.7625
113.7750
DD
40
319.2625
323.7625
119.7750
EE
41
325.2625
329.7625
FF
42
331.2750
335.7750
GG
43
337.2625
341.7625
HH
44
343.2625
347.7625
A-2
98
99
109.2750
115.2750
121.2625
125.7625
B
15
127.2626
131.7625
C
16
133.2625
137.7625
D
17
139.2500
143.7500
E
18
145.2500
149.7500
F
19
151.2500
155.7500
G
20
157.2500
161.7500
Channels with the designation A-1 through A-8 are designated because
their frequencies immediately precede that of the CATV channel 14 known
as A. Some of these are used for CATV channels 95-99.
H
21
163.2500
167.7500
I
22
169.2500
173.7500
At PACE we have the expertise to help you design a full headend solution
that suits your needs. Call PACE and let us provide you with the tools you
need to start or expand your commercial broadcasting business.
7
7
175.2500
8
8
181.2500
9
9
187.2500
10
10
11
High-Band
VHF
Aural
-
14
Mid-Band
-
A-1
VHF
Channel
TV
A
CATV has channels with frequencies below channel 2. They are designated
T-7 through T-14 and are usually used for transmission in the reverse direction . These are also known as the Return Path Channels. Broadband internet access, security cameras, and live broadcast feeds use the T channels
or Return Path Channels to reach the headend.
Band
CATV
Aural
Super-Band
The video carrier frequency is 1.25 MHz above the lower edge, for channel
2 the video is at 55.25 MHz.
Channel
CATV
II
45
349.2625
353.7625
JJ
46
355.2625
359.7625
KK
47
361.2625
365.7625
LL
48
367.2625
371.7625
MM
49
373.2625
377.7625
NN
50
379.2625
383.7625
OO
51
385.2625
389.7625
179.7500
PP
52
391.2625
395.7625
185.7500
QQ
53
397.2625
401.7625
191.7500
RR
54
403.2500
407.7500
193.2500
197.7500
SS
55
409.2500
413.7500
11
199.2500
203.7500
TT
56
415.2500
419.7500
12
12
205.2500
209.7500
UU
57
421.2500
425.7500
13
13
211.2500
215.7500
VV
58
427.2500
431.7500
WW
59
433.2500
437.7500
XX
60
439.2500
443.7500
YY
61
445.2500
449.7500
ZZ
62
451.2500
455.7500
Hyper-Band
Standard TV channels are 6 MHz wide starting from the lower edge of channel 2 at 54 MHz. Within the 6 MHz space is the video carrier, the color carrier, and the audio carrier for the channel.
Band
Sub-Band
Wavelength Versus Frequency Chart
Channel
TV
Visual
AAA
63
457.2500
Aural
Band
Channel
CATV
TV
Visual
Aural
461.7500
–
106
685.2500
689.7500
BBB
64
463.2500
467.7500
–
107
691.2500
695.7500
CCC
65
469.2500
473.7500
–
108
697.2500
701.7500
DDD
66
475.2500
479.7500
–
109
703.2500
707.7500
EEE
67
481.2500
485.7500
–
110
709.2500
713.7500
FFF
68
487.2500
GGG
69
493.2500
HHH
70
III
JJJ
KKK
Ultra-Band
CATV
491.7500
–
111
715.2500
719.7500
497.7500
–
112
721.2500
725.7500
499.2500
503.7500
–
113
727.2500
731.7500
71
505.2500
509.7500
–
114
733.2500
737.7500
72
511.2500
515.7500
–
115
739.2500
743.7500
73
517.2500
521.7500
–
116
745.2500
749.7500
Insertion Loss Tables
RG6 COPPER COVERED STEEL
RG6 SOLID COPPER
Frequency (MHz)
dB/ft
Frequency (MHz)
dB/ft
4
0.013
0.3
0.004
450
0.045
450
0.045
860
0.063
860
0.063
950
0.064
950
0.066
1450
0.083
1450
0.081
2150
0.102
2150
0.100
0.111
2500
0.110
0.123
3000
0.121
LLL
74
523.2500
527.7500
–
117
751.2500
755.7500
2500
MMM
75
529.2500
533.7500
–
118
757.2500
761.7500
3000
NNN
76
535.2500
539.7500
–
119
763.2500
767.7500
OOO
77
541.2500
545.7500
–
120
769.2500
773.7500
PPP
78
547.2500
551.7500
–
121
775.2500
779.7500
–
79
553.2500
557.7500
–
122
781.2500
785.7500
–
80
559.2500
563.7500
–
123
787.2500
791.7500
–
81
565.2500
569.7500
–
124
793.2500
–
82
571.2500
575.7500
–
125
–
83
577.2500
581.7500
–
–
84
583.2500
587.7500
–
85
589.2500
593.7500
–
86
595.2500
–
87
–
Ultra-Band
Band
RG6 QUAD SOLID COPPER
RG11 COPPER COVERED STEEL
Frequency (MHz)
dB/ft
Frequency (MHz)
dB/ft
0
0.003
5
0.024
797.7500
450
0.048
450
0.045
799.2500
803.7500
860
0.061
860
0.055
126
805.2500
809.7500
950
0.065
950
0.058
–
127
811.2500
815.7500
1450
0.080
1450
0.059
–
128
817.2500
821.7500
2150
0.010
2150
0.080
599.7500
–
129
823.2500
827.7500
2500
0.107
2500
0.084
601.2500
605.7500
–
130
829.2500
833.7500
3000
0.120
3000
0.089
88
607.2500
611.7500
–
131
835.2500
839.7500
–
89
613.2500
617.7500
–
132
841.2500
845.7500
–
90
619.2500
623.7500
–
133
847.2500
851.7500
–
91
625.2500
629.7500
–
134
853.2500
857.7500
–
92
631.2500
635.7500
–
135
859.2500
863.7500
–
93
637.2500
641.7500
–
136
865.2500
869.7500
–
94
643.2500
647.7500
–
137
871.2500
875.7500
–
100
649.2500
653.7500
–
138
877.2500
881.7500
–
101
655.2500
659.7500
–
102
661.2500
665.7500
–
103
667.2500
671.7500
–
104
673.2500
677.7500
–
105
679.2500
683.7500
ROCHESTER, MN
MINNEAPOLIS, MN
PENSACOLA, FL
tel 507 288 1853
fax 507 288 1853
tel 763 246 9620
fax 763 542 9665
tel 850 474 3900
fax 850 474 3964
3582 Technology Dr NW
Rochester, MN 55901
2454 Louisiana Ave N
Minneapolis, MN 55427
9900-F Palafox Street
Pensacola, FL 32534
1 888 444 7223 | WWW.PACEINTL.COM