Wilo-Yonos MAXO - ATAC Solutions
Transcription
Wilo-Yonos MAXO - ATAC Solutions
ATAC Solutions 01622 882400 / [email protected] Series description: Wilo-Yonos MAXO H/m 12 Wilo-Yonos MAXO 40/0,5-12 50/ 0,5 10 -12 8 2 8 50, 12 0/ /5 ,540 /30/0 5 7 10 5- 5- /0, /30 /0, /30 40/0,5-4 4 25 25 6 65 /0, 59 50/ 0,5 -9 2 0 0 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power adjustment. Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems. Type key Example: Wilo-Yonos MAXO 30/0.5-12 Yonos MAXO High-efficiency pump (screw-end or flange-end pump), electronically controlled 30/ Nominal connection diameter 0.5-12 Nominal delivery head range [m] Special features/product advantages • Maximum efficiency thanks to ECM technology • LED display for showing delivery head setting • Quick and convenient electrical connection with Wilo-Connector • Collective fault signal on all types for assuring system availability • Simple installation due to PN 6/PN 10 combination flanges (with DN 40 to DN 65) • Can be used in cooling/air-conditioning systems without ambient temperature limits • Pump housing with cataphoretic coating for preventing corrosion due to condensation formation 5 10 15 20 25 Q/m³/h Equipment/function Operating modes • Δp-c for constant differential pressure • Δp-v for variable differential pressure Manual functions • Operating mode setting • Setting of pump output (delivery head) Automatic functions • Variable power adjustment depending on the operating mode • Deblocking function • Soft start • Integrated full motor protection Signal and display functions • Collective fault signal (potential-free NC contact) • Fault signal light • LED segment display for displaying the delivery head and fault codes Equipment • Wrench attachment point on pump body (for threaded pipe union pumps) • Quick electrical connection with Wilo-Connector. For the connection of the mains and SSM lines, with integrated strain relief • For flange-end pumps: Flange versions • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges Scope of delivery • Pump • Including gaskets for threaded connection • Incl. washers for flange screws (for nominal connection diameters DN 40 - DN 65) • Including installation and operating instructions Accessories • Screwed connections for threaded connection • Adapter fittings • Thermal insulation Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 1 / 29 ATAC Solutions 01622 882400 / [email protected] Duty chart: Wilo-Yonos MAXO Pump curves H/m 12 10 8 Wilo-Yonos MAXO 40/0,5-12 50/0 25/30/0,5-10 ,5-1 2 40/50/0,5-8 25/30/0,5-7 65/ 0,5 -9 25 /3 6 0/ 40/0,5-4 50/ 0,5 0,5- -1 2 4 9 2 0 0 5 Subject to change without prior notice. 10 15 20 www.wilo.com 50 Hz EU 25 Q/m³/h 2013-07 2 / 29 ATAC Solutions 01622 882400 / [email protected] Product list: Wilo-Yonos MAXO Type Pipe connection Nominal flange Rated pressure diameter Overall length Mains connection Gross weight Art no. PN / bar l0 / mm Yonos MAXO 25/0,5-7 Rp 1 10 180 1~230 V, 50/60 Hz m / kg 5.8 2120639 Yonos MAXO 25/0,5-10 Rp 1 10 180 1~230 V, 50/60 Hz 5.8 2120640 Yonos MAXO 25/0,5-12 Rp 1 10 180 1~230 V, 50/60 Hz 6.9 2120641 Yonos MAXO 30/0,5-7 Rp 1¼ 10 180 1~230 V, 50/60 Hz 5.9 2120642 Yonos MAXO 30/0,5-10 Rp 1¼ 10 180 1~230 V, 50/60 Hz 5.9 2120643 Yonos MAXO 30/0,5-12 Rp 1¼ 10 180 1~230 V, 50/60 Hz 7 2120644 Yonos MAXO 40/0,5-4 DN 40 6/10 220 1~230 V, 50/60 Hz 10.2 2120645 Yonos MAXO 40/0,5-8 DN 40 6/10 220 1~230 V, 50/60 Hz 10.8 2120646 Yonos MAXO 40/0,5-12 DN 40 6/10 250 1~230 V, 50/60 Hz 14.9 2120647 Yonos MAXO 50/0,5-8 DN 50 6/10 240 1~230 V, 50/60 Hz 12.1 2120649 Yonos MAXO 50/0,5-9 DN 50 6/10 280 1~230 V, 50/60 Hz 16.1 2120650 Yonos MAXO 50/0,5-12 DN 50 6/10 280 1~230 V, 50/60 Hz 16.1 2120651 Yonos MAXO 65/0,5-9 DN 65 6/10 280 1~230 V, 50/60 Hz 18 2120653 Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 3 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-7 Pump curves Approved fluids (other fluids on request) v 0 1 2 4 Rp 1 3 Heating water (in accordance with VDI 2035) m/s 0 0,5 1,0 1,5 2,0 H/m 2,5 Rp 1¼ Wilo-Yonos MAXO 25/0,5-7, 30/0,5-7 7 1~230 V - Rp 1, Rp 1¼ p/kPa 70 5 50 m ax 40 3 30 2 20 1 10 0 1 0 2 3 0,4 4 0,8 5 6 1,2 5m 4m Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 10 bar 3m Threaded pipe union Rp 1 Thread G 1½ Overall length 2m 50 1 2 3 4 5 6 P1/W Δp-v 150 7m 5m 6m 4m 3m 2m 50 0 1 2 3 4 5 6 G 1½ ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 113 180 90 90 51 Energy efficiency index (EEI) 7 Q/m³/h Dimension drawing 51 44 180 Nominal motor power P2 90 W Speed n 1000 - 3700 rpm Power consumption P1 5 - 120 W Current consumption I 0.08 - 0.90 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM PE integrated PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 180 mm 7 Q/m³/h max. 100 l0 Motor/electronics 1m 0,5m 0 Pmax Pipe connections 0 max. 6m 7m 100 0 7 Q/m³/h 2,0 Q/l/s 1,6 P1/W Δp-c 150 0 Permitted field of application . 4 0 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 60 6 • Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 4 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-7 Information for order placements Make Wilo Type Yonos MAXO 25/0,5-7 Art no. 2120639 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 4.50 kg 2013-07 5 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-10 Pump curves 0 Approved fluids (other fluids on request) 1 0 v 2 0,5 1,0 1,5 3 4 2,0 2,5 H/m 10 5 3,0 Rp 1 Heating water (in accordance with VDI 2035) m/s 3,5 Rp 1¼ Wilo-Yonos MAXO 25/0,5-10, 30/0,5-10 p/kPa 1~230 V - Rp 1, Rp 1¼ 100 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) m ax . 8 80 6 60 4 40 2 20 0 0 2 0 0,5 P1/W Δp-c 150 4 6 1,0 8 1,5 m 10 9m 8m 7m 5m Permitted field of application 0 4m 3m 100 0 0,5m 0 1m 4 6 8 10 m 10 bar 7m 8m Threaded pipe union Rp 1 Thread G 1½ l0 180 mm 6m 5m Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 4m 3m 50 1,5m 0 2 4 6 8 Q/m³/h Dimension drawing 51 G 1½ 113 180 90 90 51 44 180 Nominal motor power P2 140 W Speed n 1000 - 4400 rpm Power consumption P1 5 - 190 W Current consumption I 0.08 - 1.30 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L Pmax Q/m³/h max. 9m 100 0 Maximum permissible operating pressure Motor/electronics 2 P1/W Δp-v 150 -20...+110 °C Overall length 2m 50 Temperature range at max. ambient temperature +40 °C Pipe connections 2,5 Q/l/s max. 2,0 6m Q/m³/h • N PE SSM PE PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 integrated Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 6 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-10 Information for order placements Make Wilo Type Yonos MAXO 25/0,5-10 Art no. 2120640 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 4.50 kg 2013-07 7 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-12 Pump curves 0 1 Approved fluids (other fluids on request) 2 0 v 3 1 4 5 2 H/m 10 Rp 1 6 3 Wilo-Yonos MAXO 25/0,5-12, 30/0,5-12 p/kPa 1~230 V - Rp 1, Rp 1¼ 100 8 Heating water (in accordance with VDI 2035) m/s Rp 1¼ 4 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 80 m ax . 6 60 4 40 2 20 0 0 2 0 0,5 4 6 1,0 8 1,5 P1/W Δp-c 300 2,0 Q/m³/h 10 Permitted field of application 0 max. 11m 10m 9m 8m Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 10 bar Pmax Pipe connections 3,0 Q/l/s 2,5 • 7m 6m 5m 4m 200 Threaded pipe union Rp 1 Thread G 1½ Overall length 3m l0 180 mm 100 0 0,5m 0 2 2m 1m Motor/electronics 4 6 P1/W Δp-v 300 8 10 Q/m³/h Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz max. m m 11 10 9m 8m 7m 6m 5m 200 4m 100 0 3m 0 2 4 6 8 10 Q/m³/h Dimension drawing 64 G 1½ 135 180 90 98 64 47 245 Nominal motor power P2 200 W Speed n 1000 - 4800 rpm Power consumption P1 10 - 305 W Current consumption I 0.15 - 1.33 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM PE PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 integrated Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 8 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 25/0,5-12 Information for order placements Make Wilo Type Yonos MAXO 25/0,5-12 Art no. 2120641 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 5.30 kg 2013-07 9 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-7 Pump curves Approved fluids (other fluids on request) v 0 1 2 4 Rp 1 3 Heating water (in accordance with VDI 2035) m/s 0 0,5 1,0 1,5 2,0 H/m 2,5 Rp 1¼ Wilo-Yonos MAXO 25/0,5-7, 30/0,5-7 7 1~230 V - Rp 1, Rp 1¼ p/kPa 70 5 50 m ax 40 3 30 2 20 1 10 0 1 0 2 3 0,4 4 0,8 5 6 1,2 5m 4m Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 10 bar 3m Threaded pipe union Rp 1¼ Thread G2 Overall length 2m 50 1 2 3 4 5 6 P1/W Δp-v 150 7m 5m 6m 4m 3m 2m 50 0 1 2 3 4 5 6 G2 ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 113 180 90 90 51 Energy efficiency index (EEI) 7 Q/m³/h Dimension drawing 51 44 180 Nominal motor power P2 90 W Speed n 1000 - 3700 rpm Power consumption P1 5 - 120 W Current consumption I 0.08 - 0.90 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM PE integrated PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 180 mm 7 Q/m³/h max. 100 l0 Motor/electronics 1m 0,5m 0 Pmax Pipe connections 0 max. 6m 7m 100 0 7 Q/m³/h 2,0 Q/l/s 1,6 P1/W Δp-c 150 0 Permitted field of application . 4 0 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 60 6 • Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 10 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-7 Information for order placements Make Wilo Type Yonos MAXO 30/0,5-7 Art no. 2120642 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 4.60 kg 2013-07 11 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-10 Pump curves 0 Approved fluids (other fluids on request) 1 0 v 2 0,5 1,0 1,5 3 4 2,0 2,5 H/m 10 5 3,0 Rp 1 Heating water (in accordance with VDI 2035) m/s 3,5 Rp 1¼ Wilo-Yonos MAXO 25/0,5-10, 30/0,5-10 p/kPa 1~230 V - Rp 1, Rp 1¼ 100 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) m ax . 8 80 6 60 4 40 2 20 0 0 2 0 0,5 P1/W Δp-c 150 4 6 1,0 8 1,5 m 10 9m 8m 7m 5m Permitted field of application 0 4m 3m 100 0 0,5m 0 1m 4 6 8 10 m 10 bar 8m Threaded pipe union Rp 1¼ Thread G2 l0 180 mm 7m 6m 5m Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 4m 3m 50 1,5m 0 2 4 6 8 Q/m³/h Dimension drawing 51 G2 113 180 90 90 51 44 180 Nominal motor power P2 140 W Speed n 1000 - 4400 rpm Power consumption P1 5 - 190 W Current consumption I 0.08 - 1.30 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L Pmax Q/m³/h max. 9m 100 0 Maximum permissible operating pressure Motor/electronics 2 P1/W Δp-v 150 -20...+110 °C Overall length 2m 50 Temperature range at max. ambient temperature +40 °C Pipe connections 2,5 Q/l/s max. 2,0 6m Q/m³/h • N PE SSM PE PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 integrated Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 12 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-10 Information for order placements Make Wilo Type Yonos MAXO 30/0,5-10 Art no. 2120643 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 4.60 kg 2013-07 13 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-12 Pump curves 0 1 Approved fluids (other fluids on request) 2 0 3 1 v 4 5 2 H/m 10 Rp 1 6 3 Wilo-Yonos MAXO 25/0,5-12, 30/0,5-12 p/kPa 1~230 V - Rp 1, Rp 1¼ 100 8 Heating water (in accordance with VDI 2035) m/s Rp 1¼ 4 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 80 m ax . 6 60 4 40 2 20 0 0 2 0 0,5 4 6 1,0 8 1,5 P1/W Δp-c 300 2,0 Q/m³/h 10 Permitted field of application 0 max. 11m 10m 9m 8m Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 10 bar Pmax Pipe connections 3,0 Q/l/s 2,5 • 7m 6m 5m 4m 200 Threaded pipe union Rp 1¼ Thread G2 Overall length 3m l0 180 mm 100 0 0,5m 0 2 2m 1m 4 Motor/electronics 6 P1/W Δp-v 300 8 10 Q/m³/h Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz max. m m 11 10 9m 8m 7m 6m 5m 200 4m 100 0 3m 0 2 4 6 8 10 Q/m³/h Dimension drawing 64 G2 135 180 90 98 64 47 245 Nominal motor power P2 200 W Speed n 1000 - 4800 rpm Power consumption P1 10 - 305 W Current consumption I 0.15 - 1.33 A Motor protection Threaded cable connection Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM PE PG M20x1.5 Materials 3~230 V, 50/60 Hz L1 L3 integrated Pump housing Grey cast iron (EN-GJL-200) Impeller Plastic (PPE - 30% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Minimum suction head at suction port for avoiding cavitation at water pumping temperature Minimum suction head at 50 / 95 / 110 °C Subject to change without prior notice. www.wilo.com 50 Hz EU 0.5 / 3 / 10 m 2013-07 14 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 30/0,5-12 Information for order placements Make Wilo Type Yonos MAXO 30/0,5-12 Art no. 2120644 Weight approx. Subject to change without prior notice. www.wilo.com 50 Hz EU m 5.40 kg 2013-07 15 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-4 Pump curves Approved fluids (other fluids on request) v 0 0,4 0,8 1,2 1,6 H/m 2,4 m/s 2,0 Wilo-Yonos MAXO 40/0,5-4 p/kPa 1~230 V - DN 40 50 Heating water (in accordance with VDI 2035) • 40 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 3 30 Permitted field of application 2 20 1 10 5 4 m ax . 0 0 0 2 0 0,5 P1/W Δp-c 120 4 6 1,0 8 1,5 2,0 10 -20...+110 °C Maximum permissible operating pressure 6/10 bar Pmax Pipe connections Q/m³/h 3,0 Q/l/s 2,5 max. 5m 4,5m Temperature range at max. ambient temperature +40 °C Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 40 3,5m 3m 2,5m 2m m 1,5 4m 80 1m 40 0,5m 0 0 2 4 P1/W Δp-v 120 6 8 10 Overall length Q/m³/h 80 4m m 3,5 3m 2,5m 2m 40 0 0 2 4 6 8 10 Q/m³/h Dimension drawing ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 90 113 220 57 Dimension drawing, flange Ø 150 Ø 110 Ø 100 Ø 84 DN 40 175 Nominal motor power P2 90 W Speed n 1200 - 3700 rpm Power consumption P1 7 - 120 W Current consumption I 0.09 - 0.90 A Motor protection Threaded cable connection integrated PG M20x1.5 65 Materials 65 4 x Ø14 4 x Ø19 Energy efficiency index (EEI) 51 110 51 220 mm Motor/electronics max. 5m 4,5m l0 Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 16 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-4 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 40/0,5-4 Art no. 2120645 Weight approx. www.wilo.com 50 Hz EU m 8.60 kg 2013-07 17 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-8 Pump curves Approved fluids (other fluids on request) v 0 0,5 0 1,0 0,4 1,5 2,0 0,8 2,5 1,2 H/m 3,0 1,6 DN40 m/s 2,0 DN50 p/kPa Wilo-Yonos MAXO 40/0,5-8, 50/0,5-8 1~230 V - DN 40 / 50 80 8 m ax . 6 60 4 0 6 8 1 10 2 P1/W Δp-c 300 12 Maximum permissible operating pressure 6/10 bar 0 Pipe connections 14 Q/m³/h 3 Permitted field of application 20 2 2 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) -20...+110 °C 40 0 4 Q/l/s Pmax Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 40 max. 8m 6m 7m 5m • Temperature range at max. ambient temperature +40 °C 4 0 Heating water (in accordance with VDI 2035) 4m 3m 200 2m 100 0 0 2 1m 0,5m 4 6 Overall length 8 10 14 Q/m³/h 12 P1/W Δp-v 300 7m 6m 5m 4m 200 100 0 3m 0 2 4 6 8 10 12 14 Q/m³/h Dimension drawing 64 135 220 98 110 64 48 Dimension drawing, flange Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz Nominal motor power P2 200 W Speed n 1200 - 4800 rpm Power consumption P1 10 - 305 W Current consumption I 0.15 - 1.33 A 250 Motor protection Threaded cable connection Ø 150 Ø 110 Ø 100 Ø 84 DN 40 220 mm Motor/electronics max. 8m l0 integrated PG M20x1.5 65 Materials Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated 4 x Ø19 65 4 x Ø14 Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 18 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-8 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 40/0,5-8 Art no. 2120646 Weight approx. www.wilo.com 50 Hz EU m 9.20 kg 2013-07 19 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-12 Pump curves 0 Approved fluids (other fluids on request) 1 v 2 3 H/m 4 m/s Wilo-Yonos MAXO 40/0,5-12 1~230 V - DN 40 12 10 p/kPa 120 100 ma x. 8 80 6 60 4 40 2 20 0 • Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) Permitted field of application 0 4 0 P1/W Δp-c 8 12 1 2 12m 11m 10m 9m 16 3 8m 7m 6m Q/m³/h Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 6/10 bar Pmax 0 Pipe connections 5 Q/l/s 4 max. Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 40 5m 4m 300 3m 200 2m 100 0 Heating water (in accordance with VDI 2035) 1m 0,5m 0 4 8 12 16 Overall length Q/m³/h l0 250 mm max. 12 m P1/W Δp-v m m 11 10 9m 7m 8m 6m Motor/electronics 5m 300 4m 200 100 0 0 4 8 12 16 Q/m³/h Dimension drawing 71 152 250 109 125 71 64 Dimension drawing, flange Ø 150 Ø 110 Ø 100 Ø 84 DN 40 ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz Nominal motor power P2 350 W Speed n 950 - 4500 rpm Power consumption P1 15 - 450 W Current consumption I 0.17 - 2.00 A Motor protection Threaded cable connection integrated PG M20x1.5 65 Materials Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated 65 4 x Ø14 4 x Ø19 315 Energy efficiency index (EEI) Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 20 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 40/0,5-12 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 40/0,5-12 Art no. 2120647 Weight approx. www.wilo.com 50 Hz EU m 13 kg 2013-07 21 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-8 Pump curves Approved fluids (other fluids on request) v 0 0,5 0 1,0 0,4 1,5 2,0 0,8 2,5 1,2 H/m 3,0 1,6 DN40 m/s 2,0 DN50 p/kPa Wilo-Yonos MAXO 40/0,5-8, 50/0,5-8 1~230 V - DN 40 / 50 80 8 m ax . 6 60 4 0 6 8 1 10 2 P1/W Δp-c 300 12 Maximum permissible operating pressure 6/10 bar 0 Pipe connections 14 Q/m³/h 3 Permitted field of application 20 2 2 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) -20...+110 °C 40 0 4 Q/l/s Pmax Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 50 max. 8m 6m 7m 5m • Temperature range at max. ambient temperature +40 °C 4 0 Heating water (in accordance with VDI 2035) 4m 3m 200 2m 100 0 0 2 1m 0,5m 4 6 Overall length 8 10 14 Q/m³/h 12 P1/W Δp-v 300 7m 6m 5m 4m 200 100 0 3m 0 2 4 6 8 10 12 14 Q/m³/h Dimension drawing 64 135 240 98 120 64 46 Dimension drawing, flange Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz Nominal motor power P2 200 W Speed n 1200 - 4800 rpm Power consumption P1 10 - 305 W Current consumption I 0.15 - 1.33 A 253 Motor protection Threaded cable connection Ø 165 Ø 125 Ø 110 Ø 99 DN 50 240 mm Motor/electronics max. 8m l0 integrated PG M20x1.5 70 Materials Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated 4 x Ø19 70 4 x Ø14 Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 22 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-8 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 50/0,5-8 Art no. 2120649 Weight approx. www.wilo.com 50 Hz EU m 10.50 kg 2013-07 23 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-9 Pump curves Approved fluids (other fluids on request) v 0 0,5 1,0 1,5 2,0 2,5 H/m m/s 3,0 p/kPa Wilo-Yonos MAXO 50/0,5-9 1~230 V - DN 50 80 8 Heating water (in accordance with VDI 2035) • Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) 60 6 m Permitted field of application ax . 4 40 2 20 0 0 5 0 10 1 2 15 3 Q/m³/h 20 4 5 6 P1/W Δp-c 0 9m 8m 7m 5m 6m 4m -20...+110 °C Maximum permissible operating pressure 6/10 bar Pmax Pipe connections Q/l/s max. 300 Temperature range at max. ambient temperature +40 °C Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 50 3m 200 2m 100 1m 0,5m 0 0 5 10 15 20 P1/W Δp-v Overall length Q/m³/h max. 9m 300 7m 8m 5m 6m 280 mm Motor/electronics 4m Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz 3m 200 100 0 0 5 10 15 20 Q/m³/h Dimension drawing 71 152 280 109 140 71 53 Dimension drawing, flange Ø 165 Ø 125 Ø 110 Ø 99 DN 50 318 Nominal motor power P2 350 W Speed n 950 - 4000 rpm Power consumption P1 15 - 430 W Current consumption I 0.17 - 1.88 A Motor protection Threaded cable connection integrated PG M20x1.5 70 Materials 70 4 x Ø14 4 x Ø19 l0 Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 24 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-9 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 50/0,5-9 Art no. 2120650 Weight approx. www.wilo.com 50 Hz EU m 14.20 kg 2013-07 25 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-12 Pump curves Approved fluids (other fluids on request) v 0 1 2 H/m 10 4 m/s 3 Wilo-Yonos MAXO 50/0,5-12 p/kPa 1~230 V - DN 50 100 8 80 m ax Heating water (in accordance with VDI 2035) • Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) . 6 60 Permitted field of application 4 40 Temperature range at max. ambient temperature +40 °C -20...+110 °C 2 20 Maximum permissible operating pressure 6/10 bar 0 0 5 0 10 15 2 P1/W Δp-c 600 20 4 25 Q/m³/h Pmax 0 Pipe connections Q/l/s 6 Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 50 max. m m 11m 10 9 8m 7m 6m 5m 4m 400 3m 200 0 0,5m 0 5 2m 1m 10 15 20 P1/W Δp-v 600 25 Overall length Q/m³/h l0 280 mm Motor/electronics max. m 9m 8m 7m 6m 5m m 0 11 1 400 4m 200 0 0 5 10 15 20 25 Q/m³/h Dimension drawing 71 152 280 109 140 71 53 Dimension drawing, flange Ø 165 Ø 125 Ø 110 Ø 99 DN 50 ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz Nominal motor power P2 500 W Speed n 950 - 4400 rpm Power consumption P1 15 - 600 W Current consumption I 0.17 - 2.65 A Motor protection Threaded cable connection integrated PG M20x1.5 70 Materials Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated 70 4 x Ø14 4 x Ø19 318 Energy efficiency index (EEI) Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 26 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 50/0,5-12 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 50/0,5-12 Art no. 2120651 Weight approx. www.wilo.com 50 Hz EU m 14.20 kg 2013-07 27 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 65/0,5-9 Pump curves Approved fluids (other fluids on request) v 0 0,5 1,0 1,5 H/m m/s 2,0 p/kPa Wilo-Yonos MAXO 65/0,5-9 1~230 V - DN 65 8 80 6 60 m . ax 40 2 20 0 5 0 10 15 2 20 4 25 6 P1/W Δp-c 600 8m 9m Q/m³/h 0 Temperature range at max. ambient temperature +40 °C -20...+110 °C Maximum permissible operating pressure 6/10 bar Pmax Pipe connections Q/l/s 7m 6m 5m Flange Combination flange PN6/10 (PN 16 flange according to EN 1092-2) Nominal flange diameter DN 65 4m 3m 200 2m 1m 0 Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data • must be checked) max. 400 0,5m 0 5 10 15 20 P1/W Δp-v 600 25 Overall length Q/m³/h 9m 7m 6m 5m 8m 4m 3m 200 0 0 5 10 15 20 25 Q/m³/h Dimension drawing 71 152 280 109 140 71 57 Dimension drawing, flange Ø 185 Ø 145 Ø 130 Ø 118 DN 65 280 mm Energy efficiency index (EEI) ≤ 0.23 Electromagnetic compatibility EN 61800-3 Emitted interference EN 61000-6-3 Interference resistance EN 61000-6-2 Speed control Frequency converter Protection class IP X4D Insulation class F Mains connection 1~230 V, 50/60 Hz Nominal motor power P2 500 W Speed n 950 - 4000 rpm Power consumption P1 15 - 600 W Current consumption I 0.17 - 2.65 A Motor protection Threaded cable connection integrated PG M20x1.5 80 Materials 80 4 x Ø14 4 x Ø19 327 l0 Motor/electronics max. 400 • Permitted field of application 4 0 Heating water (in accordance with VDI 2035) Pump housing Grey cast iron (EN-GJL-250) Impeller Plastic (PPS - 40% GF) Pump shaft Stainless steel (X46Cr13) Bearing Carbon, metal impregnated Minimum suction head at suction port for avoiding cavitation at water pumping temperature Subject to change without prior notice. www.wilo.com 50 Hz EU 2013-07 28 / 29 ATAC Solutions 01622 882400 / [email protected] Data sheet: Wilo-Yonos MAXO 65/0,5-9 Terminal diagram 1~ 230 V, 50/60 Hz L N PE SSM Minimum suction head at 50 / 95 / 110 °C 3~230 V, 50/60 Hz L1 L3 PE 0.5 / 3 / 10 m Information for order placements SSM L2 L3 L1 L2 SSM: Collective fault signal (NC contact according to VDI 3814, load capacity 1 A, 250 V ~) For function, see Wilo catalogue, chapter "Pump management Wilo control, planning guide" Subject to change without prior notice. Make Wilo Type Yonos MAXO 65/0,5-9 Art no. 2120653 Weight approx. www.wilo.com 50 Hz EU m 16.10 kg 2013-07 29 / 29
Similar documents
Series description: Wilo-Yonos PICO
• Fluid temperature -10°C to +95°C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X2 D
• Threaded connection Rp ½, Rp 1 and Rp 1¼
• Max. operating pressure 6 bar
Wilo-Yonos ECO...-BMS
Data sheet: Wilo-Yonos ECO 25/1-5 BMS
Yonos ECO...-BMS 25/1-5 BMS