Series description: Wilo-Yonos PICO

Series description: Wilo-Yonos PICO
H/m
7
Wilo-Yonos PICO
25, 30/1-8
6
5
4
15, 25, 30/1-6
3
2
1
15, 25, 30/1-4
0
0
Design
Glandless circulation pump with threaded connection, blocking-current
proof EC motor and integrated electronic power control.
Application
All hot water heating systems, air-conditioning applications, industrial
circulation systems.
Type key
Example:
Wilo-Yonos PICO 30/1-4
Yonos PICO
High-efficiency pump (screw-end pump),
electronically controlled
30/
Nominal connection diameter
1-4
Nominal delivery head range [m]
130
Overall length
Special features/product advantages
• Very high degrees of efficiency due to ECM technology
• High-efficiency pump especially for single and two-family houses, as
well as for two to six-family houses.
• Only 4 watts minimum power consumption
• Preselectable control modes for optimum load adjustment Δ p-c
(differential pressure constant), Δ p-v (differential pressure variable)
• Integrated motor protection
• LED for setting the setpoint and displaying the current consumption in
watts
• Venting function for venting the rotor chamber
• Quick electrical connection with Wilo-Connector
• Flexible installation due to compact design
• Very high starting torque for reliable starting
Technical data
• Fluid temperature -10°C to +95°C
• Mains connection 1~230 V, 50 Hz
• Protection class IP X2 D
• Threaded connection Rp ½, Rp 1 and Rp 1¼
• Max. operating pressure 6 bar
Subject to change without prior notice.
1
2
3
4
Q/m³/h
Equipment/function
Operating modes
• Δ p-c for constant differential pressure
• Δ p-v for variable differential pressure
Manual functions
• Operating mode setting
• Setting the pump output (delivery head)
• Bleeding function
Automatic functions
• Stageless power adjustment depending on the operating mode
• Automatic deblocking function
Signal and display functions
• Display of power consumption in W
• Display of the current pumping head for setting
Equipment
• Wrench attachment point on pump body
• Quick electrical connection with Wilo-Connector
• Bleeding function
• Blocking current-proof motor
• Particle filter
Materials
• Pump housing: Grey cast iron (EN-GJL-200)
• Impeller: Plastic (PP - 40% GF)
• Pump shaft: stainless steel
• Bearing: Carbon, metal impregnated
Scope of delivery
• Pump
• Wilo-Connector
• Gaskets
• Installation and operating instructions
Options
• Yonos PICO...130 version with short port-to-port length of 130 mm
Accessories
• Screwed connections
• Adapter fittings
• Thermal insulation
• Angle plug with 2 m connecting cable
www.wilo.co.uk 50 Hz EU
2013-02
1 / 19
Data sheet: Wilo-Yonos PICO 15/1-4-130
Pump curves Δp-c (constant)
0
1
0
2
0,4
0
0,2
Approved fluids (other fluids on request)
3
0,8
0,4
Rp ½
1,0
Rp 1¼
Rp 1 m/s
1,2
0,6
H/m
4
0,8
p/kPa
Wilo-Yonos PICO
15/1-4, 25/1-4, 30/1-4
1~230 V - Rp ½, Rp 1, Rp 1¼
40
4
∆p
-c
3
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
Permitted field of application
ma
x.
1
0
0
0,5
0
2
1,0
1,5
0,4
0,2
4
2,0
6
Q/m³/h
Q/l/s
8
0,5m
5
0
0,5
1,0
1,5
2,0
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
10
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
0
Pmax
Pipe connections
2m
10
20
Q/Igpm
max.
3m
15
2,5
0,6
P1/W
0
•
30
2
0
Heating water (in accordance with VDI
2035)
2,5
Q/m³/h
Threaded pipe union
Rp ½
Thread
G1
Overall length
L0
130 mm
Motor/electronics
Pump curves Δp-v (variable)
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 3600 rpm
Power consumption 1~230 V
P1
4 - 20 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
2 / 19
Data sheet: Wilo-Yonos PICO 15/1-4-130
Dimension drawing
Information for order placements
78
40
G1
130
58
65
38
Make
Wilo
Type
Yonos PICO 15/1-4-130
Art no.
4164011
Weight approx.
m
2 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
3 / 19
Data sheet: Wilo-Yonos PICO 15/1-6-130
Pump curves Δp-c (constant)
0
0
1
2
0,5
0
3
4
1,0
0,4
1,5
0,8
Approved fluids (other fluids on request)
5
6
2,0
1,2
H/m
7 Rp ½
2,5 Rp 1 m/s
Rp 1¼
1,6
p/kPa
Wilo-Yonos PICO
15/1-6, 25/1-6, 30/1-6
6
60
1~230 V - Rp ½, Rp 1, Rp 1¼
50
5
Heating water (in accordance with VDI
2035)
•
-c
∆p
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
4
40
3
30
2
20
ma
x.
1
0
0
0
1
2
0,2
0,4
0
3
0,6
4
10
0,8
1,0
8
Q/m³/h
4
1,2
Q/l/s
16 Q/Igpm
12
max.
P1/W
5m
30
4m
0,5
m
10
0
0
1
2
3
Pump curves Δp-v (variable)
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
Pmax
Pipe connections
2m
20
0
Permitted field of application
4
Q/m³/h
Threaded pipe union
Rp ½
Thread
G1
Overall length
L0
130 mm
Motor/electronics
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 4700 rpm
Power consumption 1~230 V
P1
4 - 40 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
4 / 19
Data sheet: Wilo-Yonos PICO 15/1-6-130
Dimension drawing
Information for order placements
78
40
G1
130
58
65
38
Make
Wilo
Type
Yonos PICO 15/1-6-130
Art no.
4164012
Weight approx.
m
2 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
5 / 19
Data sheet: Wilo-Yonos PICO 25/1-4-130
Pump curves Δp-c (constant)
0
1
0
2
0,4
0
0,2
Approved fluids (other fluids on request)
3
0,8
0,4
Rp ½
1,0
Rp 1¼
Rp 1 m/s
1,2
0,6
H/m
4
0,8
p/kPa
Wilo-Yonos PICO
15/1-4, 25/1-4, 30/1-4
1~230 V - Rp ½, Rp 1, Rp 1¼
40
4
∆p
-c
3
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
Permitted field of application
ma
x.
1
0
0
0,5
0
2
1,0
1,5
0,4
0,2
4
2,0
6
Q/m³/h
Q/l/s
8
0,5m
5
0
0,5
1,0
1,5
2,0
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
10
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
0
Pmax
Pipe connections
2m
10
20
Q/Igpm
max.
3m
15
2,5
0,6
P1/W
0
•
30
2
0
Heating water (in accordance with VDI
2035)
2,5
Q/m³/h
Threaded pipe union
Rp 1
Thread
G 1½
Overall length
L0
130 mm
Motor/electronics
Pump curves Δp-v (variable)
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 3600 rpm
Power consumption 1~230 V
P1
4 - 20 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
6 / 19
Data sheet: Wilo-Yonos PICO 25/1-4-130
Dimension drawing
Information for order placements
78
40
G 1½
130
58
65
38
Make
Wilo
Type
Yonos PICO 25/1-4-130
Art no.
4164017
Weight approx.
m
2 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
34
81
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
7 / 19
Data sheet: Wilo-Yonos PICO 25/1-6-130
Pump curves Δp-c (constant)
0
0
1
2
0,5
0
3
4
1,0
0,4
1,5
0,8
Approved fluids (other fluids on request)
5
6
2,0
1,2
H/m
7 Rp ½
2,5 Rp 1 m/s
Rp 1¼
1,6
p/kPa
Wilo-Yonos PICO
15/1-6, 25/1-6, 30/1-6
6
60
1~230 V - Rp ½, Rp 1, Rp 1¼
50
5
Heating water (in accordance with VDI
2035)
•
-c
∆p
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
4
40
3
30
2
20
ma
x.
1
0
0
0
1
2
0,2
0,4
0
3
0,6
4
10
0,8
1,0
8
Q/m³/h
4
1,2
Q/l/s
16 Q/Igpm
12
max.
P1/W
5m
30
4m
0,5
m
10
0
0
1
2
3
Pump curves Δp-v (variable)
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
Pmax
Pipe connections
2m
20
0
Permitted field of application
4
Q/m³/h
Threaded pipe union
Rp 1
Thread
G 1½
Overall length
L0
130 mm
Motor/electronics
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 4700 rpm
Power consumption 1~230 V
P1
4 - 40 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
8 / 19
Data sheet: Wilo-Yonos PICO 25/1-6-130
Dimension drawing
Information for order placements
78
40
G 1½
130
58
65
38
Make
Wilo
Type
Yonos PICO 25/1-6-130
Art no.
4164018
Weight approx.
m
2 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
34
81
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
9 / 19
Data sheet: Wilo-Yonos PICO 25/1-4
Pump curves Δp-c (constant)
0
1
0
2
0,4
0
0,2
Approved fluids (other fluids on request)
3
0,8
0,4
Rp ½
1,0
Rp 1¼
Rp 1 m/s
1,2
0,6
H/m
4
0,8
p/kPa
Wilo-Yonos PICO
15/1-4, 25/1-4, 30/1-4
1~230 V - Rp ½, Rp 1, Rp 1¼
40
4
∆p
-c
3
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
Permitted field of application
ma
x.
1
0
0
0,5
0
2
1,0
1,5
0,4
0,2
4
2,0
6
Q/m³/h
Q/l/s
8
0,5m
5
0
0,5
1,0
1,5
2,0
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
10
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
0
Pmax
Pipe connections
2m
10
20
Q/Igpm
max.
3m
15
2,5
0,6
P1/W
0
•
30
2
0
Heating water (in accordance with VDI
2035)
2,5
Q/m³/h
Threaded pipe union
Rp 1
Thread
G 1½
Overall length
L0
180 mm
Motor/electronics
Pump curves Δp-v (variable)
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 3600 rpm
Power consumption 1~230 V
P1
4 - 20 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
10 / 19
Data sheet: Wilo-Yonos PICO 25/1-4
Dimension drawing
Information for order placements
78
40
G 1½
180
58
90
38
Make
Wilo
Type
Yonos PICO 25/1-4
Art no.
4164021
Weight approx.
m
2.150 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
11 / 19
Data sheet: Wilo-Yonos PICO 25/1-6
Pump curves Δp-c (constant)
0
0
1
2
0,5
0
3
4
1,0
0,4
1,5
0,8
Approved fluids (other fluids on request)
5
6
2,0
1,2
H/m
7 Rp ½
2,5 Rp 1 m/s
Rp 1¼
1,6
p/kPa
Wilo-Yonos PICO
15/1-6, 25/1-6, 30/1-6
6
60
1~230 V - Rp ½, Rp 1, Rp 1¼
50
5
Heating water (in accordance with VDI
2035)
•
-c
∆p
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
4
40
3
30
2
20
ma
x.
1
0
0
0
1
2
0,2
0,4
0
3
0,6
4
10
0,8
1,0
8
Q/m³/h
4
1,2
Q/l/s
16 Q/Igpm
12
max.
P1/W
5m
30
4m
0,5
m
10
0
0
1
2
3
Pump curves Δp-v (variable)
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
Pmax
Pipe connections
2m
20
0
Permitted field of application
4
Q/m³/h
Threaded pipe union
Rp 1
Thread
G 1½
Overall length
L0
180 mm
Motor/electronics
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 4700 rpm
Power consumption 1~230 V
P1
4 - 40 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
12 / 19
Data sheet: Wilo-Yonos PICO 25/1-6
Dimension drawing
Information for order placements
78
40
G 1½
180
58
90
38
Make
Wilo
Type
Yonos PICO 25/1-6
Art no.
4164022
Weight approx.
m
2.150 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
13 / 19
Data sheet: Wilo-Yonos PICO 30/1-4
Pump curves Δp-c (constant)
0
1
0
2
0,4
0
0,2
Approved fluids (other fluids on request)
3
0,8
0,4
Rp ½
1,0
Rp 1¼
Rp 1 m/s
1,2
0,6
H/m
4
0,8
p/kPa
Wilo-Yonos PICO
15/1-4, 25/1-4, 30/1-4
1~230 V - Rp ½, Rp 1, Rp 1¼
40
4
∆p
-c
3
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
Permitted field of application
ma
x.
1
0
0
0,5
0
2
1,0
1,5
0,4
0,2
4
2,0
6
Q/m³/h
Q/l/s
8
0,5m
5
0
0,5
1,0
1,5
2,0
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
10
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
0
Pmax
Pipe connections
2m
10
20
Q/Igpm
max.
3m
15
2,5
0,6
P1/W
0
•
30
2
0
Heating water (in accordance with VDI
2035)
2,5
Q/m³/h
Threaded pipe union
Rp 1¼
Thread
G2
Overall length
L0
180 mm
Motor/electronics
Pump curves Δp-v (variable)
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 3600 rpm
Power consumption 1~230 V
P1
4 - 20 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
14 / 19
Data sheet: Wilo-Yonos PICO 30/1-4
Dimension drawing
Information for order placements
78
40
G2
180
58
90
38
Make
Wilo
Type
Yonos PICO 30/1-4
Art no.
4164023
Weight approx.
m
2.150 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
15 / 19
Data sheet: Wilo-Yonos PICO 30/1-6
Pump curves Δp-c (constant)
0
0
1
2
0,5
0
3
4
1,0
0,4
1,5
0,8
Approved fluids (other fluids on request)
5
6
2,0
1,2
H/m
7 Rp ½
2,5 Rp 1 m/s
Rp 1¼
1,6
p/kPa
Wilo-Yonos PICO
15/1-6, 25/1-6, 30/1-6
6
60
1~230 V - Rp ½, Rp 1, Rp 1¼
50
5
Heating water (in accordance with VDI
2035)
•
-c
∆p
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
4
40
3
30
2
20
ma
x.
1
0
0
0
1
2
0,2
0,4
0
3
0,6
4
10
0,8
1,0
8
Q/m³/h
4
1,2
Q/l/s
16 Q/Igpm
12
max.
P1/W
5m
30
4m
0,5
m
10
0
0
1
2
3
Pump curves Δp-v (variable)
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
Pmax
Pipe connections
2m
20
0
Permitted field of application
4
Q/m³/h
Threaded pipe union
Rp 1¼
Thread
G2
Overall length
L0
180 mm
Motor/electronics
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 4700 rpm
Power consumption 1~230 V
P1
4 - 40 W
Motor protection
Not required (blocking-current
proof)
Screwed cable connection connector
11 PG
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
0.5 / 3 / 10 m
2013-02
16 / 19
Data sheet: Wilo-Yonos PICO 30/1-6
Dimension drawing
Information for order placements
78
40
G2
180
58
90
38
Make
Wilo
Type
Yonos PICO 30/1-6
Art no.
4164024
Weight approx.
m
2.150 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
81
34
106
126
Terminal diagram
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
17 / 19
Data sheet: Wilo-Yonos PICO 25/1-5-130
Terminal diagram
Approved fluids (other fluids on request)
Heating water (in accordance with VDI
2035)
•
Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data
•
must be checked)
L
N
PE
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Permitted field of application
Temperature range at max. ambient
temperature of +25 °C
•
-10...+110
Temperature range at max. ambient
temperature +40 °C
•
-10...+95 °C
Maximum permissible
operating pressure
6 bar
Pmax
Pipe connections
Threaded pipe union
Rp 1
Thread
G 1½
Overall length
L0
130 mm
Motor/electronics
Energy Efficiency Index (EEI)
≤ 0.20
Electromagnetic compatibility
EN 61800-3
Emitted interference
EN 61000-6-3
Interference resistance
EN 61000-6-2
Speed control
Frequency converter
Protection class
IP X2D
Insulation class
F
Mains connection
1~230 V, 50/60 Hz
Speed
n
800 - 4050 rpm
Power consumption 1~230 V
P1
5 - 33 W
Motor protection
Not required (blocking-current
proof)
Materials
Pump housing
Grey cast iron (EN-GJL-200)
Impeller
Plastic (PP - 40% GF)
Pump shaft
Stainless steel
Bearing
Carbon, metal impregnated
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
°C
0.5 / 3 / 10 m
Information for order placements
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
18 / 19
Data sheet: Wilo-Yonos PICO 25/1-5-130
Make
Wilo
Type
Yonos PICO 25/1-5-130
Art no.
4169842
Weight approx.
m
2 kg
• = appropriate, - = not appropriate
The benchmark for the most efficient circulators is EEI ≤ 0.20.
Subject to change without prior notice.
www.wilo.co.uk 50 Hz EU
2013-02
19 / 19