Wendy`s Store Decor Hanging Instructions

Transcription

Wendy`s Store Decor Hanging Instructions
Wendy’s Store Decor Hanging Instructions
STRAIGHT wall configuration
3”
13”
1) Unwrap and separate the
framed Icon pictures from each
other.
13”
13”
2) Tape provided paper templates in position according to dimension stated
above. Mark hole position, remove template (to use on next divider) and drill
holes using 3/8 (.375) drill bit.
CURVED wall configuration
3”
15.25”
15.25”
3) Tape provided paper templates in position according to deminision stated
above. Mark hole position, remove tempate (to use on next divider) and drill
holes using 3/8 (.375) drill bit.
4) Place peg on back of picture
through hole. NOTE: Before moving
to the next step please review chart
below for icon placement
5) Locate the “female” framed icon.
Apply standard liquid nail adhesive
inside the hole and attach to the
“male” framed icon.
Icon placement from either side of divider. (curved and straight walls)
Tomato-#107
Potato-#108
Frosty-#109
Fries-#110
Lettuce-#111
Hamburger-#112
Creative Palette Inc • 500 N. Hamilton Rd • Columbus, OH • 1-800-321-1949 • fax 614-575-1508
3/8 (.375) drill bit
hole drilling template
(use for all views)
Wendys mounting Instructions
Hardware included for
mounting ART to the wall
Brackets on the back of art
Make level.For wall anchors
and brackets
Drill holes and set wall
anchors
Screw in bracket mounts
Alignment of brackets to
security wall anchor
Screw in locking screw on
the bottom. Make locking
screw horizontal
Line up graphic to the
mounting brackets
Turn locking screw to the
vertical position
Wendys mounting instrtn 12.22.05