company profile

O
U
TR
S
N
C
N
O
TI
E
FIL
RO
YP
A
TR
T
R
PO
S
N
IL
O
&
S
A
G
S
N
IO
AT
IC
N
U
M
M
O
C
LE
TE
ES
TI
LI
TI
U
G
IN
IN
M
RISsafety.com
C
AN
MP
CO
creating effective height safety solutions
With the
market place
becoming increasingly aware of the need for
employee protection when working
at heights, RIS is ideally positioned to
provide local and overseas industries with
practical solutions for any height safety, confined
space or rope access applications. RIS designs, manufactures and distributes an extensive range of tested
and standards compliant range of products, including
permanent anchor points, horizontal and vertical fall protection systems, aluminium and fiberglass ladders and walkway
systems, fall arrest retractable blocks (inertia reels), tripods and
winches for confined space, as well as having its own range of
Standards approved personal protective equipment (PPE).
RIS also have a comprehensive engineering workshop
and are able to design solutions and construct complex
structures to address height safety access issues. We are
therefore able to offer our clients a product and service portfolio
that will satisfy our industry’s stringent hierarchy of control, we
truly are a solutions provider.
Our internal management capabilities and national
infrastructure allow us to effectively manage large scale
projects with major clients such as: • Melbourne Cricket
Ground • Adelaide International Airport • NSW Department of Commerce (TAFE) • Integral Energy • Adelaide
Oval • Dreamworld • Fiona Stanley Hospital • Adelaide
Medical Research Centre • Defence Maintenance Management • Transfield • Stockland Group • Macquarie
Countrywide • Woolworths • Australian Submarine Corporation
• Australand • Railcorp • Transocean • BHPB • CBRE • Jones
Lang Lasalle • SGA Property Consultants • Monadelphous
• Downer EDI • CIP • Sydney Domestic Airport • Sydney
Cricket Ground • Royal Adelaide Hospital • John Holland
• Rio Tinto • Lend Lease • Bechtel.
Employing in excess of 70 staff and with branches in Sydney,
Melbourne, Adelaide, Brisbane, Perth, Canberra, Hobart,
Mackay and Darwin, and with a wide national and international distribution network, we pride ourselves on the most
practical, cost effective and compliant fall protection, confined
space or rope access systems in Australia and overseas.
The Hierarchy of Control
and our Product Range
For each building structure or access issue, hazard identi­
fication should be completed to determine the potential for risk
of injury, with solutions being determined within a four level
hierarchy of control.
Substitution
MEDIUM
Isolation
LOW
Fall Protection
Based on this assessment, RIS are able to offer a solution
tailored to your needs.
The RIS Strategy
Controls
At RIS, our actions are clearly defined;
Elimination
• We will only promote and manufacture compliant products,
equipment and services to meet the ever increasing demands
of the marketplace.
• We endeavour to act as a credible solutions provider
to industry and not merely as a distributor of products.
• We maintain strong relationships with our local and international suppliers to ensure that we offer the latest in height safety
technology and products available.
• An ongoing commitment to staff training ensures that our role
as solution providers is maintained throughout our business.
• When appropriate, our national branch network is utilised
to consistently and dependably service the needs of our national
client base. We call this our National Concept and find this
is the approach preferred by organisations with multiple sites
wishing to maintain a common safety strategy.
Elimination
HIGH
Products
Identified during our site audit process RIS would,
where possible, recommend the elimination of the
height safety risk through redesign.
Substitution
Also identified through our site audit process, if the
elimination of risk through redesign is not possible,
RIS would recommend the substitution of components, processes or systems.
Isolation
If substitution is not possible RIS would recommend
the isolation of worker risk through the use of
permanent edge protection systems (walkways and
guardrails).
Fall Protection If the risk cannot be isolated, RIS would then
recommend the use of fall protection equipment
(anchor points, harnesses, lanyards, vertical and
horizontal systems).
Walkway and Handrail Systems
RIS Aluminium and Fibreglass Walkway Systems provide safe access to roof top
plant and equipment. The RIS walkway is, lightweight yet incredibly strong
and virtually maintenance free walkway system which provides an easy
solution to safety in the workplace. The RIS walkway system is
compatible with most metal deck roof profiles including corrugated and fibre cement, concrete surfaces, internal roof space applications, insulated panel profiles. The RIS walkway and handrail systems
are designed and installed to the relevant requirements of AS/NZS1657:2013
and various statutory codes of practice
Typical installations for all of these products include:
• Roof Walkways • Rooftop Platforms • Sewage Treatment Works
• Marine Gangways • Stair Treads • Lightweight Catwalks • Industrial Applications
Aluminium Ladder and Roof Access Systems
The RIS range of modular aluminium ladders and roof access systems are manufactured with the highest
level of safety in mind and to ensure compliance with Australian and International standards. The extra
strong frame structure guarantees a very stable and rigid ladder even at considerable heights. The
specially designed rungs provide superior grip and support ensuring a higher level of safety
whilst climbing the ladder. All RIS ladders have an in-built security system to prevent unauthorised access. The ladders have numerous accessories such as cages, handles etc and can
be ordered with our own vertical safety line and rail systems to ensure the highest level of safety.
The RIS Ladder and Roof Access Systems can be designed and installed to most applications and meet the
relevant requirements of AS1657-2013 and various statutory codes of practice.
Typical installations for all of these products include:
• All internal/external roof access situations • Rooftop Platforms
The RIS specialized Fabrication team will design and fabricate whatever
the requirement to make sure that your site is compliant.
Interclamp Non-Welded Handrail System
Interclamp is a versatile high quality malleable iron pipe fitting with multiple uses.
Designed for easy, simple and fast erection of rigid structures by hand with minimum tools
required. Interclamp is a cost effective, efficient system, particularly compared with traditional
methods of construction such as welding where specific tools and extensive training is required.
Typical installations for Interclamp is:
• Cycle Racks/Trolley Bays • Playground Equipment
• Staircase Handrails • Wheelchair Access Ramps
• Railway Guardrailing • Mezzanine Floors/Platforms.
Temporary Edge Protection
RIS manufactures a comprehensive range of temporary commercial edge protection systems to suit any
application such as C&Z purlin, parapet wall, concrete slab, balconies, etc. These systems are easy
to install and very user friendly, and provide the highest level of safety for the workplace. All of the
RIS edge protection systems have been tested and comply with Australian standards requirements.
Safetruck System
RIS has been working with the transport industry to develop a safety system to be
used on curtain-sided trucks (tautliner) to provide protection during the loading and
unloading of trucks. The patented Safetruck safety system comprises of a specially
designed rail system that is attached to the roof extrusion of the truck. This unique
and world first design allows a simultaneous bilateral movement of the system which
is directly related to the location and movement of the person using the system. This
ensures that the Safetruck safety system does not interfere with the loading and unloading
of the truck while providing the highest level of safety.
Permanently
Installed Fall
Arrest Systems
RIS designs, manufactures and installs their own
range of fully compliant horizontal and vertical fall arrest
systems in stainless steel cable, stainless steel or galvanized
rail sections and structural aluminium extrusions. RIS are therefore
well positioned to offer our clients a complete height safety solutions service.
When worker safety and productivity is a priority our highly qualified design team will
work exclusively on the design of a safety solution to meet your individual requirements.
The stages of the Safety Solution Process are as follows:
Risk Assessment and Site Survey > Computer Simulation > Systems Selection >
Design Service > Installation > Training > Annual Service and Re-Certification
HORIZONTAL LIFELINES and RAILS
Designed and Installed systems by RIS provide uninterrupted movement and
constant fall protection for workers while at the same time increasing productivity by providing total freedom to work in almost any
environment. RIS horizontal lifeline and rail systems are
ideal for a wide range of applications when designed
for either fall arrest or fall restraint. RIS unique bilateral
Strongrail system provides an unprecedented level of safety
by significantly reducing the risks associated with pendulum effect.
This system is also ideal for low clearance areas and obstructed areas.
RIS Hammerhead, RIS Strongrail, RIS Saferail systems:
• Roof Access
• Roof Maintenance
• Truck and Rail Car Loading Bays
• Crane Access
• Process Plant Maintenance
• Aircraft Maintenance
• Abseiling Applications
• General Fall Restraint Applications
• General Overhead Applications
• Low Clearance Areas
• Obstructed Areas
VERTICAL LIFELINES and RAILS
Designed and Installed systems by RIS provide maximum personal fall
protection whilst ascending or descending a ladder or tower.
These systems can be of a vertical steel cable or aluminium
extrusion / track operated construction and fitted to permanent
ladders of almost any length. In the event of a fall these systems will
limit the fall distance to a maximum of 600mm.
RIS Safeladder and RIS Saferail are an ideal solution for the following applications:
• Permanent Ladders • Power Poles • Electrical Towers • Confined Space Access Ladders
Permanently Installed Anchor Points
The RIS range of anchor points have been designed to suit timber truss and steel purlin
(C or Z section), surface mounted for metal roof profiles (No roof penetration), chemset
or HSL type for concrete or block work installations incorporating all types of tile and
metal cladding profiles.
All external components are manufactured in stainless steel and can
be used in fall arrest or fall restraint applications. The anchor points
are manufactured by RIS and have been independently tested to meet
or exceed the requirements of AS/NZS1891.4:2009 and AS/NZS5532:2013
ALUMINIUM
F
IN ALL
ER A
TI RR
A E
RE S
EL T
S
AR
N
ES
S
C
O
N
FI
ED
RO
N
AC
SP
E
RIS manufactures and distributes their own
range of Australian Standards approved fall arrest
harnesses, lanyards and industry specific roofers kits
which provide all the necessary components of a personal
fall arrest system in one package. We also supply fall arrest
retractable blocks, confined space equipment.
EQ
UI
PM
EN
EL
IN
ES
T
T
H EM
O P
RI O
ZO RA
N RY
TA
L
LI
F
KI
H
ER
S
RK
ES
O
C
FW
AC
O
PE
Personal Protective
Equipment and
Confined Space
Equipment
RO
T
PE
RM
AN
EN
T
AN
C
H
O
R
PO
IN
TS
Watertight integrity is ensured by the installation of lead flashing, neoprene
gaskets or flashing seals.
Engineering Solutions
RIS have a comprehensive engineering and fabrication operation and are able to design solutions and
construct complex structures to address height
safety access issues. RIS are also at the forefront
of research & development and have designed
a number of world first safety solutions to
address industry wide problems.
RIS aluminium walkway systems are
virtually maintenance-free walkway s
cess to roofs and roof top plant and
of metal deck profiles available, inclu
be mechanically assembled on site u
can also be easily fitted with aluminiu
walkways and handrails are designe
various statutory codes of practice.
The Complete Service
RIS is able to conduct a thorough safety audit of any existing
site and make full recommendations for any height safety requirements to ensure future worker safety and compliance with
relevant safety standards.
This ensures that our customers have peace of mind in the
knowledge that all their height safety products and systems
have been correctly inspected and maintained. RIS are in a
position to provide this service across Australia for national
customers with multiple sites.
Project Design
Training
RIS have their own team of dedicated and specialised project
designers and engineers that actively work with architects,
builders and engineers in the design of specific safety system
solutions for buildings, structures, equipment and other applications.
To ensure the highest levels of safety are maintained, operator
training is made available upon the completion of any works to
detail correct usage, maintenance and inspection guidelines.
To selected customers, RIS can also offer tailored height safety
training packages that provide users with the intensive skills
required for working at heights.
Site Safety Audits and Risk Management Studies
Installation
RIS have their own team of dedicated and specialised installers
in each of their branches. This guarantees the most professional and responsive service to our customers.
Inspection and Recertification
Documentation
Every project completed by RIS will be accompanied by an
operator work manual and signage detailing correct usage,
inspection guidelines, maintenance schedules and a warranty
certificate.
RIS provides a comprehensive inspection and recertification
service to selected customers for products and systems.
THE RIS CUSTOMER GUARANTEE
CONTACT DETAILS:
Sydney
Tel: (02) 8781 2100
Fax: (02) 8781 2111
[email protected]
Mackay
Tel: (07) 4998 5533
Fax: (07) 4998 5544
[email protected]
Hobart
Tel: (03) 6228 2155
Fax: (03) 6228 2177
[email protected]
Melbourne
Tel: (03) 9330 4911
Fax: (03) 9330 4977
[email protected]
Adelaide
Tel: (08) 8268 3766
Fax: (08) 8243 0638
[email protected]
Darwin
Tel: 0407 533 918
[email protected]
• RIS technical advisors and on-site installers are fully trained
and accredited to provide the best possible advice and
solution to any height safety application.
Canberra
Tel: (02) 6280 7200
Fax: (02) 6239 1066
[email protected]
Perth
Tel: (08) 9418 2600
Fax: (08) 9418 2622
[email protected]
• RIS is fully insured with professional indemnity, product
liability and public liability coverage as well as all types of
general cover. You can rest assured that for every project of
any size, you are in the very safest of hands.
Brisbane
Tel: (07) 3216 6413
Fax: (07) 3216 7745
[email protected]
Every customer can have full confidence in trusting RIS
with their height safety requirements.
• RIS only manufacture, distribute and promote products that
meet or exceed Australian Standards AS/NZS1891.4:2009,
AS/NZS1657:2013 and AS/NZS5532:2013.
• RIS fully warrant their products and performance.
RISsafety.com