Specification Systems

Specification
Systems
Rick Levin, FCSI, CCS, LEED AP
BD+C; Associate, Lead Specifier
Kahler Slater, Inc.
Wendel Chamberlin, AIA, CCS;
W/C Consulting Inc.
Mike Kundinger, CSI, CCS,
LEED AP BD+C;
Specifications Writer
Flad Architects
Curt Norton, CSI, CCS; Specifier
Curtis Norton Consulting
madison.csinet.org
Agenda
• Specification writing options
– Word Processor Based
– Database
– Linking to BIM
• Trends in specifications
madison.csinet.org
Word Processor Based
madison.csinet.org
MasterSpec
• Master guide specs word processing
system
• Pre-written spec Sections for all Project
types
• Contains editor’s notes, supporting
documents & automation software
• Updated regularly by volunteer peer
Review Committees
madison.csinet.org
Masterspec History
• 1969: Created by AIA/ARCOM; endorsed
by professional organizations (e.g.,
ACEC, ASID, ASLA, IIDA, & NSPE)
• 2011: AIA/ARCOM acquired SpecText
from CSRF; ARCOM markets, sells &
distributes CSRF products & services
madison.csinet.org
Available Libraries
•
•
•
•
•
•
•
•
Architectural / Structural / Civil
Mechanical
Plumbing & Fire Protection
Electrical
Communications
Interiors
Landscape
Specialty: Historic Preservation & Small Project
madison.csinet.org
Documents & Format
• Bidding & Contract requirements and
General Requirements; coordinated with
AIA and EJCDC Documents
• Full Sections, Short Form Sections &
Outline specs
• Conforms to CSI’s MasterFormat (or
ISO’s OmniClass), Uniformat,
PageFormat, & SectionFormat
madison.csinet.org
Supporting Documents
• Evaluations: The “Green Sheets,” a
discussion of products and technologies,
material attributes, installation
requirements, etc.
• Drawings / Specs coordination notes
• Upgrades to e-Specs Linx, software for
CAD/BIM integration & Altarix™
madison.csinet.org
Automation Software
• e-Specs Linx Automated Editor
–Project editor that creates &
manipulates Project info
–Not a word processor
madison.csinet.org
e-Specs Linx
• Creating a Project:
– Select MasterSpec Sections
– Interactive Editing: Answer questions to
define the scope of the Section
• Delete portions of each Section
• Deleted text can be shown or hidden
madison.csinet.org
e-Specs Linx
• Creating a Project, cont’d:
– Manual Editing: Allows 1) review of
Interactive Editing; 2) additional fine edits; 3)
overriding actions of the Editor
– Check paragraph hierarchy
– Sections are exported to the word processor
• Make remaining edits, insert additional
requirements; Masterworks or in-house
macros work
madison.csinet.org
Masterworks
• Performs production tasks on single or multiple
Sections
• Select / edit / delete paragraphs and options
• Tasks accomplished with ‘one mouse click’:
– Spell check
– Custom headers/footers
– Generate tables of content
– Select English or metric units
– Generate reports (e.g., Submittals, extra stock,
warranties, etc.)
madison.csinet.org
SpecAgent
• Provides product & mfr information
• A SpecAgent browser assists with:
– Researching mfrs listed in MasterSpec
– Product comparisons
– Selecting Mfrs: Mfrs are imported into
section text, held for consideration, or
rejected
madison.csinet.org
SpecAgent
• Lists references in each section (e.g.,
standards, books, articles, etc.)
• Provides Internet hyperlink between section
text & SpecAgent; integrated with MasterSpec
• Mfrs may opt to be listed in MasterSpec for
managing product info; identifies spec Sections
that include the mfr's products
• Enhanced Listings facilitates evaluating
manufacturers
madison.csinet.org
LEED Specs Tool
• Coordinates Masterspec Libraries & LEED
2009 Rating Systems
• Includes:
– Summary of LEED requirements & identifies
relevant spec Sections
– Division 01 Sections needed to achieve LEED
certification
– Related technical specs text & editor’s notes
madison.csinet.org
Altarix™
• New product; creates & automatically
updates office masters
• Applies MasterSpec updates to User’s
office master
• Updates User’s master specs library
without changing existing Project specs
• Preserves a firm’s corporate history
madison.csinet.org
Altarix™
• Includes on-screen editor to revise specs text,
add comments & project notes, etc.
• Allows copying Sections from other Altarix™
Projects & importing text into a specs template
• Allows access to SpecAgent for current product
and mfr info, standards, references, product
comparison tables, etc.
madison.csinet.org
SpecText
• A system of pre-written, master
specs Sections for preparing Project
specs & office masters
• Suited to environmental & utility
engineering Projects *
• Written & updated by professional
specifiers
madison.csinet.org
SpecText History
• 1967: CSI forms the Construction
Sciences Research Foundation (CSRF)
• 1971: CSRF publishes Creating a
Common Language; SpecText is created
as a subset of COMSPEC, a computerassisted specs program
• 1978: SpecText is developed and
marketed
•
madison.csinet.org
SpecText History
• 1996: National Institute of Building
Sciences (NIBS) becomes developer &
marketer of SpecText’s electronic version
• 2011: AIA/ARCOM acquires SpecText
from CSRF; ARCOM markets, sells, and
distributes CSRF products & services
madison.csinet.org
Available Libraries *
•
•
•
•
•
Environmental Engineering
Site/Civil
Structural
Mechanical/Electrical
Architectural
madison.csinet.org
Documents & Format
• Bidding & Contract requirements and General
Requirements; coordinated with AIA and
EJCDC Documents
• Conforms to CSI’s MasterFormat (or ISO’s
OmniClass), Uniformat, PageFormat, and
SectionFormat
• Incorporates sustainable design language
• Uses an edit-and-delete & fill-in-the-blank
process
madison.csinet.org
Documents & Format
• Full Sections (SpecText): For moderate- to
large-scale, or complex Projects, publically or
privately bid
• Short Form Specs (SpecText II): Abridged
Parts 1 & 3 and detailed Part 2; for light
commercial, multi-family residential, and lowrise bldgs
Outline Specs: For documenting design
decisions during SDs & DDs; for cost
estimating
madison.csinet.org
Supporting Documents
• Masterworks (or EditSpec) &
SpecAgent
• No specs automation software? (i.e.,
no e-Specs Linx?)
• ‘SpecWave AEC’ software for BIM
integration
• Drawings / Specs coordination notes
madison.csinet.org
Miscellaneous
Subscription includes:
• Training on-site & via webinars
• Technical support for content,
implementation & use.
• SpecText can be installed on a local- or
wide-area network server.
Employees at each licensed site can use
SpecText simultaneously
madison.csinet.org
Pros & Cons
• Pros
– Masterspec:
•
•
•
•
Comprehensive
Rides AIA coattails, including legal
Educated decisions made from presented material
Good technical & computer support
– SpecText
• Complements Masterspec
• Rides CSI & AIA coattails
madison.csinet.org
Pros & Cons
• Cons
– MasterSpec
• Comprehensive - wordy, lengthy
• Pricey
– SpecText
• Fill-in-the-blank process
• No e-Specs Linx-type software - ??
madison.csinet.org
SpecsIntact
SpecsIntact is an automated system for
processing standard Masters used in DoD
facility construction projects worldwide.
(NASA) http://specsintact.ksc.nasa.gov/.
madison.csinet.org
Unified Facilities Guide Specifications (UFGS)
Consists of more than 820 Guide
Specifications in CSI MasterFormat. Available
through the Construction Criteria Base (CCB)
administered by the National Institute of
Building Sciences (NIBS).
madison.csinet.org
Unified Facilities Guide Specifications (UFGS)
A joint effort of the U.S. Army Corps of Engineers
(USACE), the Naval Facilities Engineering Command
(NAVFAC), the Air Force Civil Engineer Support Agency
(HQ AFCESA), the Air Force Center for Engineering
and the Environment (HQ AFCEE) and the National
Aeronautics and Space Administration (NASA).
madison.csinet.org
Unified Facilities Guide Specifications (UFGS)
Extensible Markup language (XML). This
tagging scheme provides the intelligence that
SpecsIntact uses in automatically processing
the Sections.
madison.csinet.org
SpecsIntact (Specifications-Kept-Intact)
SpecsIntact is a Specification
Management System that consists of two
main components, the SI Explorer and SI
Editor.
madison.csinet.org
SpecsIntact/UFGS
“Pros & Cons”
• (+) Required by DoD agency projects
• (+) production and presentation of quality control submittals
during design and construction.
• (-) Requires maintenance of separate master.
• (-) Dedicated personnel to make production routine predictable.
madison.csinet.org
ARCAT
Third party provider of manufacturer
product information available from an
internet browser, Iphone and Ipad apps and
Android apps. (http://www.arcat.com)
madison.csinet.org
ARCAT
900 specs all in the CSI 3 part format, 300
SpecWizards for automated spec writing.
Free to use and no registration required.
madison.csinet.org
ARCAT
“Pros & Cons”
(+) (-) Buyer/User beware.
madison.csinet.org
Database Systems
madison.csinet.org
e-SPECS OVERVIEW
• e-SPECS is a family of products that automates
the preparation of specifications
• Database software system vs. manual word
processing
• Extracts the product and material requirements
from the Building Information Model (BIM)
and/or CAD drawings to develop project
specifications
madison.csinet.org
e-Specs OVERVIEW
• Instantly updates the project specifications as
updates and changes occur in the building
model
• e-SPECS integrates with CAD and BIM
applications including Autodesk’s AutoCAD and
Revit-based products
• Supports all libraries of MasterSpec or
integration with custom office masters
madison.csinet.org
e-Specs HISTORY
• InterSpec, Inc. developed e-SPECS in 1998
• One of the first companies to integrate
specifications with Revit
• Partnered with ARCOM MasterSpec
madison.csinet.org
e-Specs SYSTEMS
• e-SPECS e-SPECS Linx
– edit specifications without CAD/BIM integration
• e-SPECS Desktop Markup Tool
– provides access for reviewing, redlining markups,
posting and responding to project notes, and
accessing the internet for product information
madison.csinet.org
e-Specs SYSTEMS
• e-SPECS for AutoCAD
– integrates with Autodesk AutoCAD-based
applications to automate specs
• e-SPECS for ArchiCAD
– integrates with GRAPHISOFT’s ArchiCAD Building
Information Modeling applications to automate specs
madison.csinet.org
e-Specs SYSTEMS
• e-SPECS for Revit
– integrates with Autodesk Revit-based applications to
link Revit families to specs
– automatically includes and filters sections based on
the families and parameters in the BIM model
• e-SPECS Designer
– application for managing custom office masters
– ability to extend the integrated MasterSpec sections
– automatic checklist tag creation and paragraph and
text mappings
madison.csinet.org
e-Specs SYSTEMS
madison.csinet.org
e-Specs PROS
• Ability to automate project specifications based on
building model
• Update automated project specifications when changes
occur to building model
• Improve accuracy of project specifications
madison.csinet.org
e-Specs PROS
• Potentially less time needed to develop project
specifications
• Improve coordination with drawings
• Create multiple custom office master specifications
• Paragraphs and text are not deleted when editing just
hidden
madison.csinet.org
e-Specs CONS
• Automated project specifications are only as complete
as the building model
• Project specifications required at early phases of
project are not automated
• Automation dependent on data entry in Revit families
and connecting to e-SPECS
• Specifications are not 100% automated, manual input
still required
madison.csinet.org
e-SPECS INFORMATION
• Website: http://www.e-specs.com/
• Email: [email protected]
• Various training programs available
madison.csinet.org
Speclink-E
Building Systems Design develops and
sells innovative software tools for the
architecture, engineering, and construction
markets of North America. Founded in
1983, the company creates, maintains, and
supports advanced specification writing,
cost estimating and BIM interoperability
products used by thousands of architects,
engineers and design professionals
nationwide.
madison.csinet.org
Products include
•Speclink-E
•Linkman-E
•Costlink-AE (not covered here)
•Custom systems
In addition, BSD developed PerSpective for
the CSI-DBIA joint venture.
madison.csinet.org
Speclink-E is their second generation
database system of specification writing.
Speclink+ was the first version.
One database of over 600 sections can be
expanded or collapsed to provide outline,
short form, and full construction specs —
without the need to start over at each phase
of a project.
Aligns with AIA or EJCDC documents.
madison.csinet.org
madison.csinet.org
•
•
•
•
•
PageFormat or custom
Import sections from MS Word
Use tags for Reports
Create custom tags
Create Project notes for Sections
or paragraphs
• Template for creating new Sections
madison.csinet.org
7 different catalogs to address needs:
Design Criteria
Architectural
Structural Engineering
Civil Engineering
Landscape Architecture
Mechanical/Electrical
Outline & Short Form
madison.csinet.org
BSD SpecLink for Building
Product Manufacturers
• Options for product manufacturers
• Customized options in Speclink to specify
products correctly
madison.csinet.org
Pros
• Database system so the master
language is never deleted.
• Abbreviated language
• Carries information from PPD’s to other
Outline Specs or CD.
• Easy to create different office masters.
• Can edit “similar jobs” instead of going
back to master.
• Updates don’t change user edits
• Moderate price. Various $ options.
madison.csinet.org
Cons
• Only 600 sections
• Limited supporting documents (ie
green sheets)
• Like any software, you have to learn to
use and use it “right”
• Abbreviated language; may not be
acceptable for some projects
– Relies on referenced standards
madison.csinet.org
Linkman-E
• Linkman-E Ties Speclink-E to Revit
• Dashboard view used for creating links
• Can find missing products/assemblies in
model
madison.csinet.org
madison.csinet.org
madison.csinet.org
madison.csinet.org
Trends in Specifications
madison.csinet.org
Trends
• Tools are changing
• Project delivery methods are changing
• Many players and shifting roles
madison.csinet.org
Questions
madison.csinet.org
Thank You
Rick Levin [email protected]
Wendel Chamberlin [email protected]
Mike Kundinger [email protected]
Curt Norton [email protected]
madison.csinet.org