PDF format

CROSCO
COMPANY
PROFILE
>
>
CROSCO I COMPANY PROFILE
003
ABOUT
CROSCO
COMPANY DIRECTOR`S MESSAGE
CODE OF ETHICS
ORGANIZATIONAL STRUCTURE OF INA GROUP
ORGANIZATIONAL STRUCTURE OF CROSCO GROUP
CROSCO ORGANIZATION
VISION
MISSION
QHSE
HUMAN RESOURCES MANAGEMENT
TRAINING
.....004
.....006
.....008
.....009
.....010
.....012
.....013
.....014
.....018
.....020
CROSCO I company director’s message
004
COMPANY DIRECTOR`S
MESSAGE
CROSCO Integrated Drilling & Well Services Co., Ltd. is an onshore and offshore drilling
and well services contractor. We have established a leading presence in the company’s
three regions of focus, which span Northern Africa, the Middle East and Mediterranean
Europe. CROSCO provides services for some of the world’s most recognized operators
and we consistently exceed our clients’ expectations by providing our clients with
record drilling and completion times and cost saving.
CROSCO is expanding the company’s presence in our regions of focus, entering new
strategic markets and continually upgrading to provide our clients with the best
overall services and equipment available. We have established partnerships and
relationships with other leading contractors to ensure access to new technology and
we have an extensive upgrading program.
Health, safety, environment and quality (HSE&Q) are absolute priorities in CROSCO
and we demonstrate this by continually achieving improvements in our results
and records. CROSCO has ISO 9001, ISO 14001 and OHSAS 18001 certification from
Bureau Veritas Certification. CROSCO is a member and active participant in various
CROSCO I company director’s message
005
“CROSCO’s expertise, coupled with policy of
continual class and field training further
ensures flexibility, creativity and innovation.”
organizations including the International Association of Drilling Contractors and
the International Well Control Forum. We have implemented a near-miss policy
and are active participants in our clients’ HSE&Q initiatives. CROSCO’s results
speak for themselves; they are consistently better than industry averages and
are recognized by our clients and by various levels of government.
CROSCO’s greatest overall strength is our people. Over 95% of CROSCO’s personnel
have either a university degree or a technical diploma. Many have experience with
several services and have worked in numerous countries. This expertise, coupled
with CROSCO’s policy of continual class and field training further ensures flexibility,
creativity and innovation. CROSCO has not reduced personnel during periods of low
demand to ensure expert service and utmost efficiency at all times. We have been
able to maintain our continuously high level of performance without compromising
on HSE&Q.
As we grow and expand we look forward to having the opportunity to offer you our
services and satisfy your expectations.
Management Board/Company Director
CROSCO I code of ethics
CODE OF
ETHICS
006
CROSCO I code of ethics
007
CROSCO as a part of INA Group has implemented INA Group Code of Ethics.
The Code is based on respect for fundamental human rights and the ethical principles
of integrity, honesty, trust, respect, humanity, tolerance and responsibility.
The Code obligates all employees and other natural persons who are authorized as
Management Board members, executive directors or in any other capacity according
to special laws to conduct business individually and independently or jointly and as a
group and who are employed and/or work in INA Group companies in which the Code
was passed, where it is in effect and is applicable as one of the labour relations bylaws.
The Code primarily regulates the types of conduct which occur in the course of
conducting business operations and in terms of attitude towards work, colleagues
and business partners and the public, but all persons obligated by the Code are
expected to act always in compliance with and apply Code regulations and to avoid
unacceptable conduct in contravention of the Code.
Principles of Code of Ethics
INA Group is directed towards achieving goals of long-term sustainable development,
value increase and attainment of competitive advantages.
lt fosters and encourages mutual trust and respect and professional attitude
towards assistants, clients and business partners.
Diligent work, professionalism and motivation of employees are recognized as a
cornerstone for Improvement of business processes and attainment of goals.
Communication between employees on all levels, especially in the manager/
employee relations, is based upon mutual respect and tolerance.
A stimulative work environment for innovative and creative work is being created.
A special care is taken to protect personal data of employees and candidates
for positions.
The relationship with employees is based upon trust and respect and therefore any
offensive behaviour and harassment, either verbal or physical, is unacceptable.
Discrimination or harassment of employees, clients, providers or any business
assistants on the basis of their race, religion, nationality, sex, age, physical or
mental difficulties, marital status, sexual orientation or any other affiliation shall
not be tolerated.
A fair attitude towards stakeholders, including clients, providers, INA Group's
employees and competitors is expected from each employee, manager and director.
Using of persons by manipulation, abuse of confidential data, misinterpretation of
material facts or any other unfair activity shall not be allowed.
INA GROUP I organizational structure
008
INA GROUP
I NA-Industrija nafte, d.d. is a medium-sized European oil company headquartered in
Zagreb, Croatia. Established in 1964, today INA Group has a leading role in Croatian
oil business and a strong position in the region in the oil and gas business. INA Group
numbers 13,460 employees.
Apart from Croatia, INA has business operations in Angola and Egypt in the oil and
gas exploration and production segment. An extensive development program worth
more than USD 1 billion has been implemented in INA’s refineries in Rijeka and Sisak.
INA manages a regional network of 440+ petrol stations in Croatia and neighbouring
countries.
INA is committed to doing business in accordance with sustainable development,
which means that it strives towards integrating economic, environmental and social
factors in its daily operations. Trying to make energy available, INA wants to be a driver
of social and economic development, taking care of people and the environment while
fostering responsible business operations and local partnerships.
SUBSIDIARIES IN CROATIA
CROSCO, d.o.o. I STSI, d.o.o. I INA Maziva d.o.o. I HOSTIN d.o.o. I ITR d.o.o. I
PRIRODNI PLIN d.o.o. I Top Računovodstvo Servisi d.o.o. I Ina - Osijek Petrol d.d.
SUBSIDIARIES ABROAD
INTERINA d.o.o. Ljubljana I INA BH d.d. Sarajevo I INA d.o.o. Beograd I
INA-CRNA GORA d.o.o. Podgorica I Holdina d.o.o. Sarajevo I Adriagas S.r.l. Milano
CROSCO GROUP I organizational structure
009
CROSCO GROUP
SUBSIDIARIES
100% ROTARY DRILLING Co. Ltd.
100% CROSCO INTERNATIONAL podjetje za naftne servise d.o.o. – Slovenia
100% CROSCO INTERNATIONAL Ltd. Tuzla – Bosnia and Herzegovina
100% CROSCO B.V. – Netherlands
99% CROSCO S.A. DE C.V. – Mexico
100% SEA HORSE SHIPPING INC.
100% NORDIC SHIPPING LIMITED
100% CROSCO INTERNATIONAL LIMITED
60% Corte Cros d.o.o.
CROSCO MANAGEMENT BOARD I organization
010
CROSCO I organization
011
MANAGEMENT BOARD
/ COMPANY DIRECTOR
STRATEGIC SECTORS
Marketing
QHSE
Human Resources
OPERATING BD
Onshore Drilling
Offshore Drilling
Workover & Well Services
Maintenance
FINANCE BF
Investment & Development
Planning & Controlling
Corporate Centre
DEPARTMENTS
Legal
Security Management
BRANCH OFFICES & SUBSIDIARIES
CROSCO I vision
012
Key Corporate objective and main responsibility of each employee is to provide
integrated and individual onshore and offshore drilling and well services with highly
experienced personnel. Another objective of the company, and the responsibility
of each employee, is to continually exceed industry standards for Health, Safety,
Environment and Quality and to continually improve Efficiency and Profitability.
VISION
CROSCO I mission
013
MISSION
··
··
··
··
··
··
··
··
We provide integrated and individual services
We promote creativity, flexibility and innovation
We satisfy and exceed our client’s requirements, demands and expectations
We strive to develop long-term relationships and partnerships
with clients and other drilling and service companies
We continue to grow our international activities and
meet the demands of the Croatian market
We strive for continual improvements in Health,
Safety, Environment and Quality
We ensure highly trained, experienced and motivated employees
We strive for continual improvements in efficiency and profitability
CROSCO I quality management system
QHSE
014
QUALITY MANAGEMENT SYSTEM
The quality and development of CROSCO's business are based on a certified system of
quality management and control, and knowledge and long-time experience in design
and performance involved in the exploration and production of oil, natural gas and all
types of formation water, testing and completion of wells, geophysical, geomechanical
and geotechnical operations and equipment/tools maintenance.
CROSCO’s Quality Management System is designed in accordance with internationally
recognized ISO 9001:2008 standard and fulfils all requirements stipulated therein.
Since 2001 the Quality Management System has been certified by Bureau Veritas
Quality International (Bureau Veritas Certification since 2008).
CROSCO’s Scope of supply comprises:
··drilling and well services,
··well design,
··engineering and maintenance of equipment in oil and gas industry.
Our main objectives are full implementation of our Quality Policy and continual
improvement of the System with aim of maintaining the high quality of our services
supplied to clients.
Our business objectives are:
··creating and promoting partnership relations with clients and suppliers,
··fulfilling all the expectations of its clients and constantly improving its services,
··continually monitoring global development of technology and learning about areas of
activity,
··educating, training, choosing and motivating workers capable of flawless performance
and constantly improving work processes,
··working in compliance with adopted standards and specifications, and any regulatory
requirements,
··permanently monitoring and improving the quality management system.
The strategic commitment and objective of CROSCO is to become a globally recognized
oilfield service contractor.
Therefore CROSCO is building its position on the market by also keeping regular, direct,
fair and close relations with its clients. People in CROSCO endeavor to provide its clients
professional services and assistance in order to develop a relationship based on trust
and make them fully satisfied in doing business with CROSCO. Fulfilling the needs
and requests of clients, and attaining the planned quality of services/products at an
optimal cost is the constant routine of our business.
CROSCO I environmental protection in CROSCO
015
ENVIRONMENTAL PROTECTION IN CROSCO
In order to implement our Environmental Policy, fulfil the commitments established in
the Policy and achieve set environmental objectives CROSCO has implemented a high
standard Environmental Management System.
The implemented EMS is the tool helping us to achieve our ultimate environmental goals/
objectives, which are minimizing the impacts of our operations on the environment and
avoiding any damages/losses and/or potential harms to the environment.
Our EMS is:
··Designed and implemented in accordance with requirements stipulated in ISO
14001:2004 standard
··Harmonized with the requirements of OGP guidelines
··Fully integrated in Company's Management System
··Certified and periodically audited by Bureau Veritas Certification
In performing our operations worldwide we endeavour to protect local communities,
heritage and wildlife, taking into account legal requirements and local community's
environmental and other concerns.
Our aim is to be recognized by our environmental excellence among drilling and well
service contractors and to achieve our environmental goals.
Our goals are to perform operations and supply services with:
··No environmental incidents;
··No statutory environmental liabilities; and
··In an environmentally friendly manner.
CROSCO is properly equipped and capable to perform onshore and offshore operations
under the requirements of Zero-Pollution.
According to increase international concern on environment, we also give effort in
environmental protection.
Proper waste management plan begins with pollution prevention. During the
performance of the operations, all generated wastes are properly managed in order
to minimise their potential to cause harm to environment.
CROSCO I occupational health and safety
016
OCCUPATIONAL HEALTH AND SAFETY
As a worldwide drilling and oil service contractor CROSCO believes that it has the
responsibility to the people and communities which we live and work. That’s why
CROSCO maintain Health & Safety (OH&S) as a core value for all employees, and a key
element in our business conduct.
The objectives of implementation of the Occupational health and safety management
system are:
··Improvement of work conditions in terms of health and safety of employees;
··Reduction in costs due to accidents;
··Fulfillment of legal and other requirements;
··Stimulation and motivation of employees;
··Strengthening of trust between interested parties.
CROSCO’s commitment to OH&S starts with the Top Management and goes all the way
through the organization. A standing Safety Committee consisting of Top Management
members meets two times per year and is responsible for review and oversight of the
corporate OH&S Policy and the whole Safety System.
The committee also evaluates risk management process, as well as the performance
of the whole safety system and develops strategies for continuous improvement in
overall OH&S performances.
The OH&S system is planned, documented, implemented, maintained and audited on
regular basis, incorporates responsibility, accountability and creates values for our
customer.
To achieve our goal of OH&S excellence, we are committed to integrating OH&S practices
into all of our business activities by adhering to the following goals:
··Creating incident-free workplace at all time, and
··Improvement of safety culture
The OH&S system is certified according to OHSAS 18001:2007 standard, and is under
control by Bureau Veritas Certification. The OH&S system is also periodically checked
minimum one times per year, and certificates reaffirmed.
CROSCO I CROSCO'S statistic
017
00
0.
00
6.
5.
4.
00
00
0.
0.
00
0
0
0
00
0
00
0.
3.
2.
00
00
00
0
1.
YEAR
0.
0.
00
00
0
0
CROSCO'S STATISTIC IN LAST 10 YEARS
Well services - hours worked and LTI&TRI Frequency
MANHOURS
6,40
2,40
2004
4.998.209
6,85
1,77
2005
4.526.399
3,16
9,71
2006
4.427.216
1,47
5,62
2007
4.090.180
3,74
7,87
2008
5.082.295
2,18
5,10
2009
4.119.644
2,16
6,48
2010
3.241.165
2,00
6,00
2011
2.499.985
1,79
5,36
2012
2.797.528
1,80
6,30
2013
3.330.871
1,25
4,67
2014
3.211.372
0,00
2,00
4,00
6,00
TOTAL MANHOURS
8,00
10,00
12,00
TRI Freq. Rate
14,00
LTI Freq. Rate
CROSCO I human resources management
HUMAN
RESOURCES
MANAGEMENT
018
CROSCO I human resources management
··
··
··
··
··
··
··
CROSCO employs around 1500 employees.
CROSCO's employees have a high level of know-how and experience.
Workforce and know-how present key values to our business success.
Care for employees and their development is our continuous strategic priority.
We continuously invest in the education and training of our employees.
~ 90% of employees have passed in-house courses and training.
We develop and promote good team relations and
efficient communication among employees.
·· We promote acknowledgements and awards for
employee commitment and achievements.
EDUCATIONAL STRUCTURE OF EMPLOYEES
75%
20%
5%
TECHNICAL DIPLOMA
UNIVERSITY DEGREE*
GENERAL SCHOOLING
019
CROSCO I training
TRAINING
020
CROSCO I training
021
SEMINARS AND SPECIAL COURSES
Develop new ideas to support company future manpower needs
Internationally recognized certificates:
··IWCF well control certificate
··IADC rig pass
··H2S alive PITS
IN-HOUSE COURSES
Based on the special needs and demands of the client/company concerned
EDUCATION CENTER FOR DRILLERS & TOOLPUSHERS
Profession: Petroleum technician
TRAINING CENTRE
Courses in the area of well technology, safety and management are continually
developed closely following technological improvements
CROSCO's instructors - certified courses specialized for petroleum industry
Internal and external trainings
On job trainings: expanding the scope of job tasks
Development and monitoring of careers at the local and international level
>
“As we grow and expand we look forward
to having the opportunity to offer you our
services and satisfy your expectations.”
>
CROSCO I COMPANY PROFILE
023
COMPANY
SERVICES
INTEGRATED DRILLING SOLUTIONS
DRILLING
WORKOVER
WELL SERVICES
MAINTENANCE
....024
....026
....028
....030
....042
CROSCO I company services
INTEGRATED
DRILLING
SOLUTIONS
024
CROSCO I company services
025
CROSCO is an integrated onshore and offshore drilling and well services
contractor. The company has a fleet of 38 drilling and workover rigs as well as
one semisubmersible and one jackup. CROSCO is 100% owner of Hungarian based
Rotary Drilling Company. Rotary’s drilling fleet includes 4 rigs and the company
also provides workover and other well services.
CROSCO provides the following well services: well testing, cementing, stimulation,
well logging, coil tubing, nitrogen, fishing, directional drilling, coring, H2S and mud.
INTEGRATED DRILLING SOLUTIONS
DRILLING
WORKOVER
WELL SERVICES
Well Testing Services
Cementing & Stimulation Services
Re-entry Services
Well Logging
Slickline
Coil Tubing & Nitrogen
Tubular & Running
Special Services
Directional Drilling Service
Mud Service
Fishing Service
H2S Service
MAINTENANCE
Process Machinery Service
Preventive Maintenance System
Oiltools Service
Energetics Service
CROSCO I drilling
026
018
DRILLING
Operations are performed using the company's own fleet of 14 National,
Emsco, Midco, Ideco, Cardwell and Skytop drilling rigs, as well as one
semisubmersible and one jackup. Drilling capacity ranges from 2,300 to
8,000 m (7,546 to 26,247 ft).
OFFSHORE
Zagreb
semisubmersible unit
Labin
jackup drilling unit
Pentagone 91
Max. water depth: 1476 ft
Drawworks: G.D. 3000E (3000 HP)
Mud pumps: Emsco FB 1600 x 3 pcs
BOP CAMERON 18 3/4" 10M
Levingston 111-C
Independent Cantilever 55 ft.
Max. water depth: 350 ft
Drawworks: National 1320 UE (2000 HP)
Mud pumps: National 12-P-160 x 3 pcs
CROSCO I drilling
027
019
ONSHORE
Operations are performed using the company's own fleet of 16 various National, Emsco,
Midco, Ideco and Skytop drilling rigs, as
well as one semisubmersible and one jackup. Drilling capacity ranges from 2,300 National
to 8,000 801
m (7,546 to 26,247 ft).
3000 HP
National 601
2000 HP
Emsco 605
2000 HP
semisubmersible unit
Pentagone 91 I Max. water depth: 1476
ft I Drawworks:
G.D. 3000E (3000 HP)
I Mud
Emsco
604
2000
HP
Emsco 604
2000 HP
pumps: Emsco FB 1600 x 3 pcs I BOP CAMERON
18 3/4" 10M
Emsco 602
2000 HP
jackup drilling unit
Levingston 111-C I Independent Cantilever 55 ft. I Max. water depth: 350 ft I
Labin
Midco
501pumps: National 12-P-160 x 1500
Drawworks: National 1320 UE (2000 HP)
I Mud
3 pcs HP
Emsco 401
1500 HP
National 403
1000 HP
ONSHORE
National 402
1000 HP
National 801
3000
Cardwell 1B
900 HP
HP
National 601 I Emsco 602 I Emsco 603 I Emsco 604 I Emsco 605
2000
HP
Ideco 301
900 HP
Skytop 3
900 HP
Emsco 401 I Midco 501
1500
Ideco 202
725 HP
National 402 I National 403
1000
Ideco 301 I Skytop 3
900 HP
OFFSHORE
Zagreb 1
ROTARY DRILLING Co. - DRILLING RIGS
R-67
R-68
Lyb-37
Lyb-42
ROTARY DRILLING RIGS
Rig 67 (ZJ 70 DB AC- DC)
Rig 68 (ZJ 50 DB AC- DC)
Ideco
IRI - Ideco
Ideco (SBS DIR 5506)
Ideco (SBS DIR 806)
2000 HP
2000 HP
1500 HP
1500 HP
900 HP
1200 HP
900 HP
1200 HP
1000 HP
1000 HP
CROSCO I workover
WORKOVER
028
CROSCO I workover
029
Services are provided using the company's fleet of self-propelled and truck-mounted Skytop, Cardwell, Franks and National
workover rigs. Workover servicing capacity ranges from 1,830 to 6,500 m (6,004 to 21,325 ft). All of our workover rigs are selfpropelled carrier back-in type units with self-erecting and extended API portable guyed masts.
Skytop 1
136 t
Skytop 4*
125 t
National 1 National 2
National 3
National 4
National 5
Cardwell 8
Cardwell 9
Cardwell 10
Cardwell 11
Cardwell 13
100 t
Cooper LTO 350
96 t
Cardwell 1
90 t
IRI 1
IRI 2
IRI 3
Cardwell 5
Cardwell 7
Hydra Rig HRP-2
65 t
Cardwell 3
50 t
KRAZ 4
KRAZ 5
KRAZ 6
Cardwell 2
Cardwell 4
ROTARY DRILLING Co. - WORKOVER RIGS
Lyb-38 I Lyb-39 I Lyb-40 I Lyb-43 I KK-10 (SBS DIR-5506)
375 HP
KK-23/24 (SBS DIR-110)
303 HP
CROSCO I well services
WELL SERVICES
030
CROSCO I well services
031
WELL TESTING
Well testing services are provided with a full array of wireline/slickline units, separators, indirect heaters, surge tanks and various
auxiliary equipment. Well testing equipment is sourced from well-known and reputable manufacturers. Crosco wireline/slickline unit
drum capacities are available up to 8 000 m (26 247 ft) and engine power up to 353 kW. DST services are available with conventional
(mechanical) or hydraulic test tools with electronic or mechanical pressure and temperature gauges.
Well testing equipment is capable of operating in extreme well conditions with pressures up to 1,100 bar (15,600 psi), temperatures
up to 235°C (455°F) and with high contents of CO2 and H2S. Onshore services were introduced in 1966. and offshore services in 1978.
SURFACE WELL TESTING SERVICES
Assets and Equipment
Well clean-up
Well deliverability
Drawdown tests
Multi-rate tests
Build up tests
Injection tests
Interference tests
Step rate tests
Reservoir limit tests
Frac flowbacks
High pressure separators, WP: 1450 psi
Middle pressure separators, WP: 500 psi
Indirect heaters
Surge tanks
Pipe line, WP: 10 000, 5 000 and 3 000 psi, ID: 2” and 3”
Choke manifolds
Data headers
ESD system
Injection pumps
Transfer pumps
Flares
DRILL STEM TEST (DST)
Testing of layers in Open hole diameters: 6” – 12”
Testing of layers in Cased hole
diameters: 4 1/2” – 13 3/8”
Taking of downhole samples
Measurements of pressure and temperature,
both downhole and surface
Assets and Equipment:
Conventional Halliburton hydrospring tools (OH/CH)
FF Halliburton hydrospring tools (OH/CH)
FF LPR-N tools
Surface pressure control equipment
Sampling equipment
CROSCO I well services
032
CROSCO I well services
033
CEMENTING&STIMULATION
CEMENTING SERVICES
More than 40 years of experience and thousands of cement jobs successfully performed worldwide speak in favor of our quality
and professional strength. Our skilled employees, up-to-date simulation software and reliable cementing equipment have made
us recognizable at the international level.
We provide the services, equipment and technical expertise in:
Casing and liner cementing
Placing of cement plugs
Plug and abandonment
Kick-off
Loss of circulation
Remedial cementing
Squeeze cementing
Top-up cementing
Water shut-off
Cement job design
Simulation software
Laboratory testing according to API specification
Data acquisition
Density
Pressure
Flow
Cement storage and blending services
Casing equipment
Cementing heads and swedges
Running cement retainers/bridge plugs
Assets and Equipment:
Double Pump Units
Single Pump Units
Automatic Cement Mixing Unit
Batch Mixers
600 m3 Bulk Cement Tank capacity
Air Compressors
4 Cement Blending Plants
10, 20 and 40 m3 Mixwater Tanks with Agitators and
Centrifugal Pumps
Data Acquisition System
Cementing Simulation Software
Central Cementing Laboratory
HPHT Thickening Time Testers
Atmospheric Pressure Thickening Time Testers
Ultrasonic Cement Analyzer
Fluid Loss Tester
Viscometers
Mobile Cementing Laboratory
Cementing Heads and Swedges
Cement Retainers/Bridge Plugs
CROSCO I well services
034
CROSCO I well services
035
STIMULATION SERVICES
Our determination in tackling any new professional challenges and well stimulation know-how are a guarantee for getting the
job done right. Offering a full package of stimulation services to suit your needs, we will deliver the results you need quickly and
effectively and maximize the value of your assets.
We can assist you in the following:
Assets and Equipment:
Hydraulic fracturing
Sand fracturing
Acid fracturing
Breakdown jobs
Acidizing
Matrix acidizing
Acid washing
Wellbore cleanup
Perforation surge cleanup
Gravel pack
Stimulation job design
Simulation software
Laboratory testing according to API specification
Pumping services
Data acquisition
Density
Pressure
Flow
Acid storage and mixing services
11 HT – 400 pumps, each 500 HHP, total 5500 HHP
Blending Units, 75 bbl/min
Blending Units, 25 bbl
1500 m3 Fracturing Fluid Tank capacity
200 m3 Proppant Tank capacity
Stimulation Laboratory:
Particle Sizer l Compression Cell for ring mounted
samples l Porosimeter l Permeameter l Triaxial Holder
High Pressure Filter Cells l UV/VIS Spectrophotometer
Stereopycnometer l Digital Tensiometer pH/Ion Meter
l Electronic Balances Fann 50 C Viscometer l Fann 35
Viscometer Hatch Portable Spectrophotometer HighSpeed Blade Mixers l Warring Blenders Centrifuge data
Acquisition System
Treesaver
Ball injectors
Auxiliary Assets and Equipment:
Filter Units
Centrifugal Pumps
10, 20 and 40 m3 Fluid Tanks
35 m2 Acid Tanks
Gravel Pack Tools and Equipment
RTTS Packers
Hydra Jet Perforator
CROSCO I well services
036
CROSCO I well services
RE-ENTRY SERVICES
WELL LOGGING
OPEN HOLE WELL LOGGING
resistivity logging
Electrolog l Dual induction Focused Log
Dual Laterolog l Microlog
nuclear logging
gamma Ray l Compensated Neutron Log
Compensated Density Log l Spectralog
acoustic logging
Acoustic log
auxiliary logging
High Resolution Dipmeter l Directional Log l Core gun sampler
VSP
Avalon Science System
logging in water wells
Robertson geologging – gamma Ray,
Microlog, Temperature, Capacity,
Caliper, Camera
4 open hole units (3 unit & one Skid)
CASED HOLE WELL LOGGING
correlation & technical condition logging
Gamma Ray/ CCL/ Neutron
Sector Bong / CBL
Pressure/Temperature
Dual Detector Neutron
Photon Log
Free Point
production logging –(Pressure, Temp, CCL, GR, FM, FD, Cal)
perforation services
Stimulation perforation
Thru Tubing perforation
Casing guns Perforation
TCP perforation
Back Off
037
CROSCO I well services
038
SLICKLINE SERVICES
SLICKLINE SERVICE AND E-LINE SERVICES
Assets and Equipment:
Bottom Hole Pressure & Temperature Surveys
Electronic BHP/BHT Memory Gauge Services
Running & Pulling Downhole Plugs & Safety Valves
Shifting Sliding Sleeves
Locating Tubing Ends, Bottom of Hole & Obstructions
Bottom-Hole Sampling and bailing operations
Tubing Caliper Surveys
Paraffin and Scale Cutting
Fishing Operations
Gas Lift Operations
Mechanical tubing perforation
Well investigations
Rig and hoist support
Slick line units
Slick line units with crane
Slick line off shore units with cable – skid mounted
Portable slick line off shore units – skid mounted
Lightweight slick line units
Cable units for SRO measurements
BOP and surface pressure control equipment
PRESSURE AND TEMPERATURE GAUGES
Assets and Equipment:
Static and dynamic gradient surveys
Bottom Hole Pressure & Temperature surveys
Electronic BHP/BHT and surface P/T Memory Gauge services
Mechanical gauges
Electronic memory gauges (Quartz and Piezo-Resistive)
Surface Read Out gauges
COILED TUBING SERVICES
Equipment:
Well Lifting/Unloading
Well Circulation
Wellbore Cleanout
Acid Wash and Stimulation
Cementing
Light duty drilling / Milling
Velocity Strings
Fishing
Data acquisition System
Coiled tubing unit 1 1“ BOWEN 30 MB
Coiled tubing unit 1“ BOWEN 12 MX
Colied tubing unit 1 1" BOWEN 15 MZ
Coiled tubing unit 1 1“ MH 100
downhole Tools: Roll-on Connector; External Slip Connector; Twin Flapper Check Valve; Straight
Bar; Multiple Side Flow Port Nozzle; Multiple Flow Port Nozzle; Multiple Back Port Nozzle; Multiple
Up Flow Port Nozzle; Heavy duty Hydraulic disconnect; Dual Circulation Valve; Flow Activated
Bow Spring Centraliser; Torque Thru Knuckle Joint; dual Action Hydraulic Jar; Accelerator Dual
Action - Flow Thro; Rotary Wash Tool; “PCERX” Type Flo-activated Running Tool; Flow Activated “GS”
Running/Pulling Tool; downhole drilling Motor; Risers; Adapters; Flow tee; Pull Test Plate; Inline filter
CROSCO I well services
039
NITROGEN SERVICES
Equipment:
Lifting
Pipeline purging
Displacing fluids and generating foam
Reducing hydrostatic pressure in
wells to perforate or testing
Nitrogen unit SKId I; Nitrogen unit SKId II
Nitrogen unit HOBBS; Nitrogen unit Kenworth
Additional nitrogen storage (4 pcs) 2 000 gal (7570 dm3)
equipped with Fluid Level Gauge
Pump unit OILWELL
TUBULAR RUNNING SERVICES
Equipment:
Tubular running services facilitate safe
and efficient running of tubulars (drill pipe,
tubing and casing), minimizing wellsite risk
and reducing nonproductive time.
Hydraulic Power Tong (4 pcs)
Manufactured in 1985. -1 pcs; 2000. – 3 pcs (Weatherford)
Type: Model 5,5-15
C/W: Hydraulic Drive System
up to 5 1/2"/15 000 lbs*ft
Hydraulic Power Tong
Manufactured 2000. (Weatherford)
Type: Model 16-25
C/W: Hydraulic Drive System
up to 13 3/8"/25 000 lbs*ft
Hydraulic Power Unit (2 pcs)
Manufactured in 2013 (McCoy)
C/W: Deutz F6L914, Air Cooled 6 Cylinder Diesel /w air starter Power: 114 /84 hp/kW; 3000 psi
Hydraulic Power Unit (2pcs)
Manufactured 1985. and 1989. (Weatherford)
C/W: Deutz LS6914, Air Cooled 4 Cylinder Diesel w/ inertia starter Power: 113 /84 hp/kW; 2500 psi
JAM LV-2 Torq Monitoring/Control System (2 pcs)
Manufactured 2002. (Weatherford)
CROSCO I well services
040
SPECIAL SERVICES
DIRECTIONAL DRILLING AND CORING SERVICES
Equipment:
Well planning and managing survey data with
directional drilling software
Directional, horizontal and strait hole performance
drilling using mud motors
Measurement While drilling (directional and gamma)
Surveying operations with electronic single
and multi shot instruments
Oriented and Conventional coring
Black Max PdM Mud Motors from 4 3/4’’ Od to 9 5/8” OD
GE directional and gamma MWd/LWd System pozitive puls up to 175°C and 20.000 PSI
Heavy duty and standard core barrels from 4 3/4” Od to 8” OD
DMS Multishot / Singleshot instrument
with thermal shield up to 125°C
Aluminum inner tubes for coring operation
Double Pump Units
MUD SERVICES
Equipment:
On site preparation and mud treatment
Laboratory testing
Fluid material testing
Well completion and workover fluids testing
Solids control
Rig Lab
Garrett Gas Train
HTHP Filter Press
pH meter
Model 800 Viscometer
Model 900 Viscometer
Hettich centrifuge Universal 16A
Decanter Alfa Laval NX-414
Decanter derrick dE-1000
Decanter drexel Brandt HS 3400
Decanter Brandt HS 3400 VSD
CROSCO I well services
041
FISHING SERVICES
Equipment:
Wellbore obstructions removal
Casing and tubing cutting services
Milling operations
Power Swivels BOWEN S - 2,5
Power Swivels BOWEN S - 3,5
Fishing Tools: External catch: overshots, die collars; Internal catch: full circle
and ITCO type releasing spears, taper taps; Wireline grabs (harpuns) and
center spears; Type Z hidraulic jars; Fishing bumper subs; Junk catchers:
junk baskets, fishing magnets, junk subs; Junk mills, rotay shoes, washover
pipes; Casingand tubing cutters; Packer retrievers; Repair & remedial tools
(safety joints, immpresion blocks, cassing rollers, casing patches)
Torque machine
H2S SERVICES
Equipment:
Emergency procedures and H2S
contingency planning
H2S alive training course
Self contained breathing apparatus, work and escape breathing apparatus,
emergency escape breathing apparatus
Cascade air system
High pressure breathable air compressors
Fixed monitoring system and A/V alarm system
Personal detectors
CROSCO I maintenance
MAINTENANCE
042
CROSCO I maintenance
043
Maintenance and preventive maintenance is provided for drilling and workover rigs both onshore and offshore, well services
equipment, process machinery equipment, electric and electronic equipment and oil tools.
These services were developed for the requirements of CROSCO and other INA companies and are now available to clients
outside of CROSCO.
Maintenance Service provides:
Oil industry equipment reconstruction and upgrade
Development of construction and maintenance projects for equipment and facilities
Supervision, consulting and project management
Preventive maintenance computerized system management
Ex-proof equipment maintenance & periodic inspections
Service and overhaul of the drilling and workover rigs and all types of drilling/workover/well service equipment and tools
NDT inspection (MPI, Ultrasonic)
>
People in CROSCO endeavor to provide its clients
professional services and assistance in order to make
them fully satisfied in doing business with CROSCO.
>
CROSCO I COMPANY PROFILE
045
CROSCO
IN DETAILS
CROSCO LOCATION
INTERNATIONAL ACTIVITIES WITHIN INA-NAFTAPLIN
CROSCO INTERNATIONAL ACTIVITIES
GENERAL REFERENCES
COMPETITIVE ADVANTAGES
CROSCO OFFICES WORLDWIDE
.....046
.....048
.....050
.....052
.....054
.....056
CROSCO I location
046
CROSCO LOCATION
Croatia is located in-between
Central Europe, North Africa,
Middle East, CIS and North Sea
CROSCO I location
047
CROSCO I international activities
INTERNATIONAL
Activities
048
CROSCO I international activities within INA – Naftaplin
049
COUNTRY
PERIOD
TYPE OF SERVICE
OPERATOR
COUNTRY
PERIOD
TYPE OF SERVICE
OPERATOR
ALBANIA
AUSTRIA
CROATIA
1996 - 1997
1995 - 1995
1982 - 1986
INA-NAFTAPLIN, PREMIER
ROTARY, BRAUMANN
AGIP, CHEVRON, TEXACO
CYPRUS
CZE
EGYPT
ETHIOPIA
INDIA
IRAQ
ITALY
JORDAN
LIBYA
1969 - 1970
1995 - 1996
1964 - 1966
1958 - 1961
1964 - 1965
1978 - 1984
1978 - 1980
1968 - 1972
1990 - 1992
RUSSIA
SLOVAKIA
SLOVENIA
1993 - 1994
1995 - 1996
1993 - 1996
SYRIA
TUNISIA
1974 - 1979
1988 - 1992
Drilling, Well Serv., Well Logging
Drilling Services
Drilling, Well Services, Geoph.
Surveys-Offshore
Drilling Services - Onshore
Stimulation Serv., Well Logging
Geophysical Surveys
Geophysical Surveys
Drilling Services - Onshore
Drilling Services - Onshore
Drill. and Well Serv. - Offshore
Drilling Services - Onshore
Drilling and Well Services Offshore & Onshore
Consulting/Supervising Well Services
Stimulation Services
Drilling, Well Services,
Well Logging Services
Drilling Services - Onshore
Drilling Services - Offshore
TURKEY
UKRAINE
VIETNAM
1989 - 1989
1996 - 1996
1979 - 1980
Drilling Services - Offshore
Drilling Services
Well Logging Services
FOREST OIL CORP.
KAC
EGDO - EGYPT
ETHIOPIAN GOVERNMENT
ONGC
INOC
SIR, BURMACH OIL, ITALY
INA-NAFTAPLIN, JORDAN GOVERN.
SIRTE OIL, INA-NAFTAPLIN
WSS, OMV
KAC
GEOTEHNICNA DELA,
NAFTA LENDAVA
SPC
CONOCO, AGIP, INA-NAFTAPLIN,
MARATHON, SITEP
DEUTSCHE TEXACO
ITAG
AGIP
CROSCO I CROSCO international activities
050
COUNTRY
PERIOD
TYPE OF SERVICE
OPERATOR
ALBANIA
2000 - 2005
AZERBAIJAN
2000
2009 2000 - 2002
OCCIDENTAL,
INA-ALBANIA, OMV
OMV, INA d.d.
BANKERS Petroleum
SALYAN OIL, KAOC
2000 - 2012
2004 - 2005
2005
2006
2008
2010
1996 1998 - 2013
Seismic Services, Drilling Services
- Onshore, Cementing, Well Logging etc.
Geoservices
Drilling services
Workover Services, Logging Services,
DST, Drilling Services - Onshore
Geoservices
Geoservices
Geoservices
Geoservices
Geoservices
Geoservices
Integrated Drilling and Well Services
Geoservices
2004
2013 - 2014
2001 - 2002
2001
1999 - 2000
2001 - 2002
2007 - 2009
2005 -
Drilling Services - Onshore
Drilling Services - Offshore
Drilling Services - Onshore
Fracturing Service
Drilling Services - Offshore
Geoservices
Workover Services - Onshore
Drilling Services - Onshore
2006 - 2007
1997
2001
2005 - 2007
2011 2002
1996 - 2013
2007
Drilling Services - Offshore
Well Testing Services
Drilling Services - Onshore
Drilling Services - Onshore
Drilling Services - Onshore
Well Logging
Drilling Services - Offshore
Drilling Services - Offshore
B&H
CROATIA
CUBA
CZECH. REP.
EGYPT
EQ. GUINEA
GERMANY
HUNGARY
IRAQ - KURDISTAN
ITALY
IVORY COAST
SODASO HOLDING D.D. / RUDNIK SOLI TUZLA
OPĆINA ILIDŽA
UNIONVEST d.d.,SARAJEVO
ALUMINIJ d.d.,MOSTAR
HERING d.d. ŠIROKI BRIJEG
OPĆINA BUŽIM
INA
INA, JANAF, VIADUKT, BECHTEL INT., JAN DE NUL,
TEHNIKA, KONSTRUKTOR, HRVATSKE CESTE,
HIDROELEKTRA, HRVATSKE VODE, OSIJEK-KOTEKS,
D'APPOLONIA, LUKA PLOČE, STRABAG, POMGRAD INŽ.,
SWIETELSKY, ZAKLADANI STAVEB, RADNIK, TEMPO
INAgip, EDINA
INAgip
PEBERCO
KAC-CZECH. REP.
PETROBEL
INA
KHALDA
INA, RWE Dea, IEOC, AGIBA, SUCO, EDISON,
BAYPETCO, SIPETROL, GUPCO, GSPC, MARINA
OEGC/DEVON
NORMEC
HORIZON, XPRONET
FALCON/TXM
KALEGRAN
BAKER ATLAS
AGIP/ENI
EDISON International
CROSCO I CROSCO international activities
051
COUNTRY
PERIOD
TYPE OF SERVICE
OPERATOR
LIBYA
1996 - 2004
2004 - 2006
Drilling Services - Offshore
Crew Serv. - Workover/Completion
Operat.
Crew Services - Maintenance
Drilling Services - Onshore
INA, AGIP OIL, ENI GAS
SABRATHA
2006 - 2012
2003 -
MEXICO
MOROCCO
NAMIBIA
NETHERLANDS
OMAN
2013 - 2014
2008 - 2009
2001 - 2002
Drilling Services - Offshore
Drilling Services - Offshore
Drilling, casing, Tubing, Running
- Onshore & Offshore
Geoservices
Workover Services - Onshore
Integrated Services - Onshore
Drilling Services - Onshore
Drilling Services - Offshore
Geoservices
Crew Services
Well Services
Geoservices
Geoservices
Drilling Services - Onshore
Drilling Services - Onshore
Seismic Services, Integrated Services
Package & Drilling Services - Onshore
SYRIA
2007
2000
1999 2004 - 2005
2001 - 2006
2002 - 2003
2006 - 2007
2000 2003
2010 -2011
2004 - 2005
2010 - 2011
2000 - 2012
THAILAND
TUNISIA
1999 - 2004
1997 - 1999
2000 - 2004
Geoservices
Drilling Services - Onshore
Drilling Services - Onshore,
Offshore (Barge)
UAE
2000 - 2003
2010 - 2011
1999 - 2010
Well Logging
Drilling Services - Onshore
Geoservices
UKRAINE
1997 - 2000
Workover Services,
Drilling Services - Onshore
QATAR
SLOVENIA
TURKEY
MELLITAH GAS (SABRATHA)
AGIP OIL, WOODSIDE, TOTAL, WINTERSHALL,
MELLITAH OIL & GAS, ENI N.A.
TOTAL E&P LIBYE
PEMEX
LONE STAR
INA d.d.
BALANCE POINT CONTROL
PDO
HUNT OIL, JAPEX OMAN Ltd., ANADARKO
TOTAL FINA ELF
AL BAIDA TECHNICAL SERVICES
NOBLE HARVEY DUHANEY
NAFTA-GEOTERM, PREMOGOVNIK-VELENJE
GZL GeoProjekt, d.d.
GEOT d.o.o., IRGO CONSULTING
NEMMOCO
ASCENT
GEOFIZIKA, INA SYRIA, AL FURAT, HAYAN
PETROLEUM CO., DUBLIN, GULFSANDS,
TATNEFT, IPR Mediterranean, DIJLA
INA
DEUTAG/AMERADA HESS/ESSO
OFIS, AGIP, MARATHON, PLUSPETROL, EUROGAS,
ATHANOR/ CMS/ANADARKO/PREUSSAG/
OMV/ THYNA Petroleum Services
AMITY OIL INTERNATIONAL
ARAR
Private Dept. Of HH SHEIKH NAHYAN,
Schlumberger Middle East, S.A.
KASHTAN
EURODRIL (JKX)
CROSCO I general references
GENERAL
REFERENCES
052
CROSCO I general references
053
Providing services to the world's most recognized operators and many national oil companies:
AGIP OIL
ANADARKO
FALCON/TXM
AL FURATH
ASCENT
AMITY OIL INTERNATIONAL
AMERADA HESS
ATHANOR
AGIBA
BALANCE POINT CONTROL
BANKERS PETROLEUM
BAKER ATLAS
BAYPETCO
CMS
DEUTAG
DIJLA PETROLEUM COMPANY
DUBLIN
ENI
EDINA
EDISON
EDISON INTERNATIONAL
ENI GAS
ENI North Africa B.V.
EUROGAS
GEOFIZIKA D.D. ZAGREB
GUJARET STATE PETROLEUM CORP. (GSPC)
GULFSANDS PETROLEUM
GULF OF SUEZ PETROLEUM Co. (GUPCO)
HAYAN PETROLEUM COMPANY
HORIZON
HUNT OIL
IEOC
INA
INAGIP
IPR MEDITERRANEAN
JAPEX OMAN LTD.
KAC-CZECH REP. (stimulation services)
KALEGRAN
KAOC
KASHTAN
KHALDA
LONE STAR
MARATHON
MELLITAH GAS (Sabratha)
(maintenance, crew services)
MELLITAH OIL & GAS
NAFTA-GEOTERM
EURODRILL (JKX)
ESSO
NEMMOCO
NOBLE HARVEY DUHANEY
(crew services)
NORMEC (well testing services)
OCCIDENTAL
OEGC/DEVON
OMV
PDO
PEBERCO
PEMEX
PETROBEL
PLUSPETROL
PREGOMOVNIK-VELENJE
PREUSSAG
RWE DEA
SALYAN OIL
SIPETROL
SUCO
TATNEFT
THYNA PETROLEUM COMPANY
TOTAL E&P LIBYE
TOTAL FINA ELF
WINTERSHALL LIBYEN OIL
AND GAS GMBH
WOODSIDE
XPRONET
CROSCO I competetive advantages
COMPETETIVE
ADVANTAGES
054
CROSCO I competetive advantages
055
INTEGRATED AND/OR INDEPENDENT WELL SERVICES
··CROSCO's proven cultural and environmental adaptability.
··Experienced and highly educated workforce.
··Experienced with various international markets & operations.
··Excellent educational and training system.
··Integrated and certified HSE and Quality Management System (ISO).
··Integrated Management Information Systems SAP R/3, Galiot Offshore.
CROSCO OFFICES WORLDWIDE
HEADQUARTERS
CROSCO`S COMPANIES
CROSCO, Integrated Drilling
& Well Services Co., Ltd.
Ulica grada Vukovara 18
10000 Zagreb, Croatia
Phone: +385 1 3652 333
Fax: +385 1 3096 448
e-mail: [email protected]
ROTARY DRILLING Co. Ltd - Hungary
Erzsébat tér 22
8800 Nagykanizsa,
P.O.BOX: 351
Hungary
Phone: + 36 20 315 6321
Fax: + 36 93 310 155
e-mail: [email protected]
www.rotarydrilling.hu
BRANCH OFFICES
ALBANIA - Branch Office
Bulevardi "Gjergj Fishta", Kulla 4, Ap.65, Tirana,
Albania
Phone: + 385 1 371 2425,
+ 385 1 371 2426
Fax: + 385 1 371 2427
e-mail: [email protected]
EGYPT - Branch Office
El Sharifa Dina 32, Maadi, Cairo,
Egypt
Phone: + 20 2 2751 0287
Fax: + 20 2 2359 6491
e-mail: [email protected]
HUNGARY - Branch Office
Erzsébat tér 22
8800 Nagykanizsa,
Hungary
e-mail: [email protected]
LIBYA - Branch Office
e-mail: [email protected]
SYRIA - Branch Office
e-mail: [email protected]
TUNISIA - Branch Office
e-mail: [email protected]
For updated information please refer to www.crosco.com
CROSCO INTERNATIONAL Ltd. - Slovenia
Mlinska ulica 5
9220 Lendava,
Slovenia
e-mail: [email protected]
CROSCO International d.o.o. za naftne i geo servise
M.M. Dizdana, Stupine 8
75000 Tuzla,
Bosnia and Herzegovina
e-mail: [email protected]
CROSCO B.V. - Netherlands
Prins Bernhardplein 200
1097 JB Amsterdam
Netherlands
e-mail: [email protected]
CROSCO S.A. de C.V. - Mexico
38 141 Departamento 5 Santa
Margarita cd del Carmen
Carmen Campeche 24120
Guadalupe, Nuevo León
67190, Mexico
e-mail: [email protected]