Indola International Product Binder

Transcription

COMPANY PROFILE
Indola International Philippines, Inc. is a leading distributor of ventilation products specializing in residential,
commercial, industrial and agricultural applications; and consumer durable products such as bathroom
accessories, water heater systems and hotel amenities.
Established in 1997, Indola International addressed the problems of poor ventilations and unpleasant odors in
the livestock and poultry environments as well as working areas by providing sustainable ventilation solutions
through its heavy-duty exhaust fans. Diversifying its market, Indola International has expanded its product
range to include bathroom ventilators and accessories and other consumer durable products to also serve the
residential and commercial market.
To ensure the quality of the products that it offers, Indola International represents only reputable global
manufacturers who comply with internationally accepted product standards. The Indola International team is
equipped with comprehensive product knowledge and application to consistently deliver a customized package
to meet each customer’s requirements. Focused on providing utmost customer care, Indola International upholds
quality in the products and services it delivers.
VISION
To be recognized as a leading reliable partner and supplier in the ventilation and consumer durable products
industries in the Philippines.
MISSION
• To provide our valued customers with innovative solutions and top notch services.
• To strengthen our reputation as a reliable source for high quality and competitively priced ventilation and
consumer durable products.
• To develop an extensive dealer network nationwide based on mutual cooperation and respect.
FREE SERVICES OFFERED:
• Site surveys and technical advice
• Technical and product consultation
• Installation for water heater systems (within Metro Manila)
SOME NOTABLE PROJECTS:
Century Park Hotel
One Legaspi Place
St. Peregrine Parish
Plastimer Industrial Corp.
Diamond Hotel
Grand Quarter 2
Cardinal Santos Hospital
Monterey Farms
Manila Grand Opera Hotel
Montgomery Place Ph. I - IV
Megaworld Properties
Jerby Foods
Manila Hotel
Newport City
Federal Land
Century Canning
Manila Peninsula
Presidio Bellini
City Land Development
SKK Steel
Oriental Garden
Hamilo Coast
Italtel
M.Y. San Biscuits
The Pan Pacific Hotel
DMCI Homes
Globe Telecom
Marulas Industrial
Crown Tower
Holy Spirit University
EBC Fabricators
Sta. Cruz Joy Enterprises
The Grand Shang Tower
International School
Marikina Public Market
Table of Contents
Cassette Fans
BROAN Deluxe Bathroom Fans
BROAN Premium Bathroom Fan
BROAN Kinglan Exhaust Fans
BROAN Melan Exhaust Fan
BROAN Exhaust Fan / Light Combination
BROAN Recessed Exhaust Fan / Light Combination
BROAN Room-to-Room Fan Utility Fan
BROAN Losone Select Light Commercial Ventilators
BROAN Multi-port Exhaust Fans
MAXAIR G Series Exhaust Fans
VENTS LD Series Kitchen & Bathroom Exhaust Fans
4
5
6
7
8
9
10
11
12
14
16
VORTICE CA Range In-line Centrifugal Extractor Fans
VORTICE Lineo In-line Mixed Flow Extractor Fans
VENTS VKM Series In-line Centrifugal Fans
18
20
24
INDOLA V Series Panel Fans (Metal Fan Blades w/ Metal Frame)
INDOLA V Series Panel Fans (Stainless Steel Fan Blades w/ Metal Frame)
INDOLA V Series Panel Fans (Stainless Steel Fan Blades w/ Polypropylene Frame)
INDOLA Compact Panel Fans (Polypropylene Fan Blades w/ Polypropylene Frame)
INDOLA Flanged Tube Series Compact Short Case Fans
INDOLA EMI 130 Casing / Cone Fans
INDOLA Recirculation Basket Fans
INDOLA Low Pressure Nozzle System Misting Fans
RIO Industrial Oscillating Fans
RIO WV Series Industrial Exhaust Fans
RIO WAB Series Tube Axial Flow Fans
ROBOTECH Underground Parking Exhaust Jet Fans
28
30
32
36
38
40
42
44
46
48
50
51
INFINAIR ISQ Range In-line Square Centrifugal Fans
INFINAIR CUS Range Centrifugal Utility Set
INFINAIR ICC Range Low Noise Centrifugal Cabinet Fans
INFINAIR RTC Range Rooftop Centrifugal Exhaust Fans
INFINAIR IMX Range In-line Mixed-flow Exhaust / Supply Fans
INFINAIR WEX / WSP Range Sidewall Axial Exhaust / Supply Fans
54
57
59
61
64
67
Mf-Net Mechanical Thermostats
Mf-Net EW Series Electronic Variable Manual Speed Controllers
Mf-Net Humidcon-s Humidity Regulator
Mf-Net MBS Series Motor Protection Switches
72
75
76
78
VORTICE Premium Dry Range Manual & Automatic Hand Dryers
VORTICE Optimal Dry Range Manual & Automatic Hand Dryers
VORTICE Metal Dry Range Manual & Automatic Vandal-resistant Hand Dryers
80
81
82
In-Line Duct Fans
Industrial Commercial Fans
High Capacity Fans
Fan Accessories and Controls
Bathroom Accessories
Cassette Fans
EXHAUST FANS
DELUXE BATHROOM FANS
Versatile, High Quality Ventilators at Economy Prices.
688 / 671 EX
FEATURES
GrIlle
• Mattewhitepolymericgrilleblendswellwithanydecor.
• Torsionspringgrillemounting-notoolsrequired.
Motor
• Plug-in,permanentlylubricatedmotor.
• PowerfulBroan-designedcentrifugalpolymericblowerwheel.
• Snap in/out motor assembly for easy cleaning - no screws to
drive or drop.
hoUsInG
• Compact,25-gaugegalvanizedsteelhousingfitseasilybetween
ceiling joists or wall studs.
• Double-strength steel mounting flanges with keyhole slots for
DIMENSIONS
fast installation.
• Polymericductfittingwithtaperedsleeveforeasy,positiveduct
connection.
• Quietpolymericdamperpreventscoldbackdraftsandnometallic
clatter.
PERFORMANCE CURVE
688 / 671 EX
STATIC PRESSURE (In. WG)
0.80
0.70
0.60
671
EX
0.50
0.40
688
0.30
EX
0.20
0.10
0.00
0
10
20
30
40
50
60
70
80
AIR FLOW RATE (CFM)
U.L. Listed for use over bathtubs and showers when
connectedtoaGFCI-protectedbranchcircuit.
TECHNICAL SPECIFICATIONS
4
MODEL
VOLTS
AMPS
SONES
@ 0.1” Ps
CFM
(CMH)
DUCT
688EX
220
0.7
3.0
50(85)
3” round
671EX
220
1.15
6.0
70 (119)
3” round
BROAN Deluxe Bathroom Fans
HVIcertifiedratingscomplywithtesting
procedures prescribed by the Home
Ventilating Institute and conducted at
the Texas Engineering Experiment
Station at Texas A & M University.
Ratings are at 0.1 in. static pressure.
Sones are a measure of loudness and
are measured in HIV’s semi-reverberant
sound test room.
EXHAUST FANS
PREMIUM BATHROOM FANS
676 EX
Dependable, High Performance Bathroom Ventilation.
FEATURES
GrIlle
• Whitepolymericgrillecomplementsvirtuallyanydecor.
• Torsionspringgrillemounting-notoolsrequired.
Motor
• Plug-in,permanentlylubricatedmotor.
• Centrifugalblowerwheeland4-polemotordeliverhighexhaust
capacity at low levels.
hoUsInG
• Rugged steel housing finished with electrically-bonded epoxy
paint.
• Key-holedmountingbracketsoffersturdy,quickinstallation.
• Polymeric duct connectors with tapered sleeves for easier,
DIMENSIONS
positive ducting and no metallic clatter.
PERFORMANCE CURVE
676EX
0.50
0.40
0.30
0.20
0.10
0.00
0
20
40
60
80
100
120
AIR FLOW RATE (CFM)
MODEL
VOLTS
AMPS
SONES
@ 0.1” Ps
676EX
220
1.30
4.0
CFM
(CMH)
DUCT
110 (187) 4”round
BROAN Premium Bathroom Fan
sound test room.
5
EXHAUST FANS
KINGLAN FAN
FEATURES
• Highefficiencycentrifugalfanblowerandoptimizedscrolldesign
delivers29dB.
• FleetlinewhitepolymericgrillebyAmericandesigners.Simplicity
provides sophistication that will blend into any decor.
• Fully enclosed compact metal galvanized rustproof housing
design resists water and corrosion against salt spray test.
Provides better resistance against fire for home safety.
• Energysavingandlownoise,permanentlylubricatedballbearing
motor. Designed for low-temperature rise, the motor is safe and
engineered for continuous operation.
• Built-in damper prevents air backdrafts or water backflow for
better ventilation performance and energy efficiency.
• Easy installation and maintenance to all kinds of installation
environments.
FA-A010PH / FA-A013PH
FA-A016PH / FA-C020PH
NOTE:
1. Air flow value is Broan laboratory test results with +/-10%
tolerance range.
2. ThenoisevalueisA-weightedsoundpressurelevel,itisBroan
DIMENSIONS
laboratorytestresultswith+2-5tolerancerange.
3. The parameters below may be changed without prior notice.
Pressure (Pa)
PERFORMANCE CURVE
Air Flow (m3/h)
FA-A010
FA-A013
FA-A016
Φ 100 Duct Damping Curve
FA-A fans
FA-C fans
6
WATTS
NOISE
(dB)
CFM
(CMH)
STATIC
PRESSURE
(Pa)
WT.
(kg.)
DUCT
SIZE
(mm)
CUT
SIZE
(mm)
0.09
20
29
58(100)
95
2.2
100 ø
210x210
220/60
0.10
22
35
76 (130)
140
2.2
100 ø
210x210
FA-A016PH
220/60
0.12
26
39
94(160)
190
2.2
100 ø
210x210
FA-C020PH
220/60
0.18
39.6
42
117(200)
280
100 ø
210x210
MODEL
VOLTS /
Hz
AMPS
FA-A010PH
220/60
FA-A013PH
BROAN Kinglan Exhaust Fans
EXHAUST FAN
MELAN FAN
FC-A040PH
FEATURES
• Classic metal grille processed with high-tech white coating
to satisfy your high end decoration.
Simplicity provides
sophistication that will blend into any decor in your home.
environments.
NOTE:
tolerance range.
2. ThenoisevalueisA-weightedsoundpressurelevel,itisBroan DIMENSIONS
Pressure (Pa)
PERFORMANCE CURVE
Air Flow (m3/h)
FC-A040
MODEL
VOLTS /
Hz
AMPS
FC-A040PH
220/60
0.23
NOISE
WATTS
(dB)
51
45
CFM
(CMH)
STATIC
PRESSURE
(Pa)
WT.
(kg.)
DUCT
SIZE
(mm)
CUT
SIZE
(mm)
237(400)
190
5.6
150ø
287x265
BROAN Melan Exhaust Fan
7
EXHAUST FAN / LIGHT
FAN / LIGHT COMBINATION
LA-C012PH
FEATURES
• Classic white polymeric grilles, streamline design eliminates
squaringw/bathroomwallsandcomplementvirtuallyanydecor.
• Anidealcombinationoffanandlightthatoperatesindependently
or simultaneously.
environments.
NOTE:
tolerance range.
DIMENSIONS
Pressure (Pa)
PERFORMANCE CURVE
Air Flow (m3/h)
LA-C012
8
MODEL
VOLTS /
Hz
AMPS
LA-C012PH
220/60
0.08
WATTS
NOISE
(dB)
CFM
(CMH)
STATIC
PRESSURE
(Pa)
WT.
(kg.)
DUCT
SIZE
(mm)
CUT
SIZE
(mm)
18
43
70(120)
110
3.0
100 ø
222x216
BROAN Exhaust Fan / Light Combination
EXHAUST FAN / LIGHT
RECESSED FAN / LIGHT COMBINATION
RA-A012PH
FEATURES
• Beautifully designed recessed fan/lights disappear into the
ceiling with other recessed lights. Trim matched to designs of
major recessed light manufacturers.
• Anidealcombinationoffanandlightthatoperatesindependently
or simultaneously.
• Highefficiencycentrifugalfanblowerandoptimizedscrolldesign
delivers120CMHat35dB.
environments.
NOTE:
DIMENSIONS
tolerance range.
01
310
mm
185 mm
2
m
m
PERFORMANCE CURVE
mm
Pressure (Pa)
ø 160
ø 169 mm
Air Flow (m3/h)
RA-A012
MODEL
VOLTS /
Hz
AMPS
RA-A012PH
220/60
0.10
WATTS
NOISE
(dB)
CFM
(CMH)
STATIC
PRESSURE
(Pa)
WT.
(kg.)
DUCT
SIZE
(mm)
22
35
70(120)
150
3.4
100 ø
BROAN Recessed Exhaust Fan / Light Combination
9
UTILITY FAN
ROOM-TO -ROOM FAN
511 EX
Powerful Solutions for Problem Rooms.
Room-to-room ventilators provide quick solutions where more
ventilation is needed - without installing new duct work. Easily
installs in interior walls to move heated or cooled air from one room
to another. Spreads heat from fireplaces, cool air conditioners to
adjoining rooms.
FEATURES
GrIlle
• Paintablewhitepolymericgrillestomatchanydecor.
Motor
• Permanentlylubricated,thermallyprotectedplug-inmotor.
• Speciallydesignedpolymericbladeswillnotdistort.
• Motorassemblyfeaturesfast,easy“twist-lock”installation.
• Built-invariablespeedcontrol.
hoUsInG
• Requires11⅝”squareholethroughbothinteriorwalls.
• Housing can be fastened to walls in several ways - allows
flexibility; to meet almost any mounting situation.
• Adjustablehousingfitswallsfrom3”to5½”thick.
• Ruggedsteelhousing.
• Housing finished with rugged black electrically-bonded epoxy
paint.
DIMENSIONS
PERFORMANCE CURVE
511EX
0.15
0.12
0.09
0.06
0.03
0.00
0
50
100
150
200
250
AIR FLOW RATE (CFM)
10
MODEL
VOLTS
AMPS
SONES
@ 0.1” Ps
CFM
(CMH)
511EX
220
1.5
3.5
180 (306)
BROAN Room-to-Room Fan Utility Fan
sound test room.
LIGHT COMMERCIAL VENTILATORS
LOSONE SELECT
L-100 / 150 EX
Incredibly Reliable. Unbelievably Quiet.
Broanhighcapacityfansareanexceptionallyquietsolutiontocontinuous
ventilation.Withtheirheavy-dutymotors,highcapacityfansareanideal
solution conference rooms, commercial kitchens and spaces that require
ongoing ventilation. Low-vibration and low-profile, they work quietly
without getting noticed.
FEATURES
GrIlle
• Attractive low profile white polymeric grille blends with any
decor.
Motor
• Low RPM motor mounted on resilient mounts for quiet,
vibration-free operation.
• Permanently lubricated motor designed for continuous
operation.
• Single, impact-resistant balanced centrifugal blower wheel for
DIMENSIONS
extremely low sound levels.
hoUsInG
• Heavy20gaugegalvanizedsteelhousing.
• 6”roundductconnector.
• ½”acousticinsulationinsidetoreducesoundlevels.
• 8-wayadjustablemountingbracketspermitinstallationflexibility.
• Quiet,automaticbackdraftdamperbuiltintotheductconnector.
PERFORMANCE CURVE
L100, L150 Series
(Ceiling Mount)
1.00
L1
50
er
S
0.80
s
0.70
ie
L1
00
S
er
0.60
ies
0.90
0.50
0.40
0.30
0.20
0.10
0.00
0 20 40 60 80 100 120 140 160 180 200
AIR FLOW RATE (CFM)
Performance ratings include the
effects of inlet grille and backdraft
d a m p e r i n t h e a i r s t r e a m. T h e
sound ratings shown are loudness
valuesinfansonesat5’(1.5m)ina
hemispherical free field calculated
per AMCA Std. 301. Values shown
areforInstallationTypeB:freeinlet
fan sone levels. Performance shown
isforInstallationB:Freeinlet,Ducted
outlet.
SONES
MODEL VOLTS AMPS
@ 0.2” TSP
CFM
(CMH)
DUCT
L100EX
220
0.5
0.5
100 (170)
6” round
L150EX
220
0.7
1.3
150(255)
6” round
SonesandCFMlistedforceilingmountmodelsare
forhorizontalductingat.125”staticpressure.
BROAN Losone Select Light Commercial Ventilators
11
MULTI-PORT EXHAUST FAN
MULTI-PORT IN-LINE VENTILATOR
MP100 EX
FEATURES
BloWer
• High pressure, centrifugal blower accomodates many ducting
configurations.
• Motorsdesignedforcontinuousoperation.
• Permanentlylubricatedmotorassuresworry-freeoperation.
• PermanentSplitCapacitor(PSC)motorusedforquietoperation
and low power consumption.
• Plug-inmotorratedat220/240VAC,50/60Hzoperation.
hoUsInG
• Rugged20gaugesteelhousingfinishedwithelectrically-bonded
epoxy paint.
• Maybeinstalledinvirtuallyanyorientation-ceiling,wallorfloor.
• In-lineinstallationassuresquietoperation.
• Easilyremovablepanelpermitsquickaccestoblowerforcleaning
and servicing without disturbing the ductwork.
DIMENSIONS
• Four10.16cm.(4”)roundinletsandasingle15.24cm.(6”)round
outlet for easy ducting connections.
26.67 cm
• Allwiringandductworkcanbeconnectedfromtheoutsideofthe
(10.5”)
housing - no need to remove access panel or blower.
27.94 cm
(11”)
PERFORMANCE CURVE
1.10
1.00
24.13 cm
(9.5”)
Static Pressure (IN. WG.)
0.90
0.80
0.70
0.60
31.75 cm
(12.5”)
0.50
20.32 cm
(8”)
0.40
0.30
0.20
0.10
0.00
Air Flow Rate (CFM)
12
MODEL
VOLTS /
Hz
AMPS
WATTS
MP100 EX
220/60
0.30
90
RPM
CFM
(CMH)
STATIC
PRESSURE (Pa)
SHIPPING
WT.
(kg.)
DUCT
SIZE
2590
120(204)
120CFM@0Pa
7.26
6” round
BROAN Multi-port Exhaust Fans
MULTI-PORT EXHAUST FAN
MULTI-PORT DUCT VENTILATOR
The ventilator uses single inlet centrifugal ventilator, it has three
inlets and one outlet which makes it a highly flexible duct ventilator
suitable for many applications.
MPU-A125-3X100
FEATURES
• MPUissuitableforapplicationswherethereisnorequirements
for condensation separation.
• Theventilatorhousingismanufacturedfromcorrosionresistant
high tensile pre-galvanized steel with an insulated bottom and
side plate.
• Forward curved impeller, external rotor motor and auto-reset
automatic thermal overload protection.
• Longlifetimeandeasyinstallation.
• Veryeasytocleanwithitsswing-outdesign.
DIMENSIONS
Ø 125
364
254
PERFORMANCE CURVE
Pressure (Pa)
600
Ø 100
500
Ø 100
400
Ø 100
300
200
100
0
182
0
100
200
300
400
500
600
Air Flow Rate (m3/h)
272
365
MODEL
VOLTS /
Hz
AMPS
MPU-A125-3X100
220/60
0.58
WATTS
CFM
(CMH)
STATIC
PRESSURE
(Pa)
NOISE
(dB)
WT.
(kg.)
DUCT SIZE
(mm)
128
224
(380)
400
41
4.7
Inlet 100 ø
Outlet125ø
13
EXHAUST FANS
G SERIES
APPLICATIONS
• Residential Homes
• Kitchens
• Bathrooms
• Restaurants
G690
FEATURES
• High-speed for a large airflow
• Dual speed option
• Efficiently removes moisture, carbon dioxide and odors during
the quiet operations
• Contemporarydesignofgrilles
• Built-indampertopreventairbackdraft
• Metal housing with rust proof paint
• Long-life motor
• Easy installation and maintenance
• Colorofgrille:white
CERTIFICATIONS
PERFORMANCE CURVE
Static Pressure
Watts
DIMENSIONS
Static Pressure
Watts
14
MODEL
VOLTS
(@ 60 Hz.)
RATED
POWER
(Watts)
NOISE
(Sones)
AIR
VOLUME
(CFM)
DUCT
DIA.
(mm.)
GRILL
SIZE
(mm.)
MOUNTING
SIZE
(mm.)
G690
220
25/20
1.5/0.5
90/60
100(4in.)
260x260
210x210
MAXAIR G Series Exhaust Fans
EXHAUST FANS
G SERIES
APPLICATIONS
• Residential Homes
• Kitchens
• Bathrooms
• Restaurants
G6120
FEATURES
• High-speed for a large airflow
• Dual speed option
• Efficiently removes moisture, carbon dioxide and odors during
the quiet operations
• Contemporarydesignofgrilles
• Built-indampertopreventairbackdraft
• Metal housing with rust proof paint
• Long-life motor
• Easy installation and maintenance
• Colorofgrille:white
CERTIFICATIONS
PERFORMANCE CURVE
Static Pressure
Watts
DIMENSIONS
Static Pressure
Watts
MODEL
VOLTS
(@ 60 Hz.)
RATED
POWER
(Watts)
NOISE
(Sones)
AIR
VOLUME
(CFM)
DUCT
DIA.
(mm.)
GRILL
SIZE
(mm.)
MOUNTING
SIZE
(mm.)
G6120
220
40/35
1.5/0.9
120/90
100(4in.)
300 x 300
250x250
15
KITCHEN & BATHROOM FANS
LD SERIES
100 / 150 LD
Axial extract LD fans are the perfect ventilation solution for the
modern kitchens, bathrooms or toilets. Flat square shaped front
cover will match even the most refined interior. No additional
mounting boxes or special niches are needed, just connect the fan
to the air duct and fasten it with screws.
FEATURES
• MadeofhighqualityABSplastic.
• 7-bladessilentimpeller.
• Suitableforoperationinambienttemperatures40°Fto+100°F.
• Integrated component design allows all parts to be dismantled
for cleaning without the use of special tools.
CERTIFICATIONS
DIMENSIONS
Pressure (Pa)
PERFORMANCE CURVE
100 LD
150 LD
MODEL
a
b
c
D
e
100LD
150
108
126
100
30
150LD
205
165
153
150
36
Extract capacity (CMH)
16
STATIC
NOISE
PRESSURE dB(A) @
(Pa)
3m
MODEL
VOLTS @
60 Hz
WATTS
AMPS
RPM
CFM
(CMH)
 LD
220-240
14
0.085
2300
52(88)
33
33
0.60
 LD
220-240
24
0.130
2400
156(265)
78
37
0.96
 LD TUBO
220-240
16
0.100
2300
68(115)
38
36
0.68
 LD TUBO
220-240
30
0.130
2400
182(310)
87
39
1.10
VENTS LD Series Kitchen & Bathroom Exhaust Fans
WT.
(kg.)
In-Line Duct Fans
IN-LINE CENTRIFUGAL EXTRACTOR FANS
CA R ANGE
FEATURES
CA 150 Q MD
CA 200 / 315
• Ball-bearing-mountedmotorwithexternalrotormotorandhandoperated resettable thermal cut out.
• IMQ information label certifies third party product data and
performance.
• ComplieswiththeCEIEN60335-2-80standard.
• Turbine fan balanced directly on the motor.
• Motor-holder made of steel and paint-finished with furnacehammered epoxy powder for perfect weather protection.
• Galvanized steel motor mounting brackets and air flow
deflectors.
• Twospeeds(CA150QMD)
• Speed can be adjusted using an optional controller.
• ClassIIinsulation(CA150QMD)
• Supplied with mounting brackets for easy installation; 1 pc. for
CA150QMDand2pcs.forCA150andCA315.
CA 150 Q MD
DIMENSIONS (mm.)
LONG LIFE: 30,000 hours
ØE
A
ØD
CA 200
CA 315
C
F
F
B
CA150 Q MD
G
A
C
CA
D E
B
Code
A
B
C
ØD
ØE
F
30
G
CA 150 Q MD
16152
30
239
295
147
255
CA 200
16040
25
270
390
197
340
25
386
CA 315
16061
40
308
450
312
400
44
416
CA 200 / 315
Product
CA 150 Q MD
V
230

Hz
60
irflow
mh

irflow
ls
Pressure
mmH2O
Pressure
Pa
min
ma
min
ma
min
ma
min
ma
min
ma
min
ma
60
85
0.30
0.40
300
500
83
139
21
35
206
343
PM
min
ma
Lp dB
m
min
ma
1430 2350 34.7
48.1
pprov.
Ma
Ins.
Temp.
Class
C
44
cl.II
50
CA 200
220-240 50/60
180
0.75
950
263.9
55
539
2710
64
44
cl.I
50
CA 315
220-240 50/60
260
1.3
1700
486.1
75
735
2550
67
44
cl.I
60
* Sound level measured at 3m from inlet in free air condition with product ducted only in outlet according to EN ISO 3741:2009.
18
IP
VORTICE CA Range In-line Centrifugal Extractor Fans
F
DIMENSIONS (mm.)
E
D
18
B
5
10
10
R
2,5
7,2
A
C
Galvanised sheet-metal bracket (CA 150 Q MD) - 1 piece
285
260
32
Galvanised sheet-metal brackets (CA 200 / 315) - 2 pieces
130
PERFORMANCE CURVE
max
min
FREQUENCY BANDS IN OCTAVES AND SOUND OUTPUT (Maximum Speed)
CA
Code
CA 150 Q MD
16152
Hz 63
Hz 125
Hz 250
Hz 500
Hz 1000
Hz 2000
Hz 4000
Hz 8000
55.9
68.4
66.1
62.6
62.6
56.9
48.9
CA 200
16040
48.5
57.5
68.0
71.0
72.3
71.0
67.1
64.2
CA 315
16060
54.0
60.0
67.0
72.4
71.2
70.5
67.5
69.1
ThemeasurementsofthesoundpowerhavebeencarriedoutaccordingtointernationalstandardISO3741:2009.
19
IN-LINE MIXED FLOW EXTRACTOR FANS
VORTICE® LINEO
FEATURES
For duct mounting. Safety and acoustic performances
certified.
• Lineo series extractors have
certified air flow, pressure (to
UNI 10531:1995, corresponding
to ISO 5801) and noise levels
(UNI EN ISO 3741). Certification
of these parameters guarantees
that our products will always
meet the your requirements
and expectations.
• Compact overall dimensions.
The products have a very small
overall size, making them ideal
for installation in cramped
areas. Slim yet powerful, the
overall diameter is only slightly
larger than the ventilation duct it
connects to.
• Protection rating IPX4. The
products are protected against
jets of water from all directions,
making them ideal for installation
in humid and wet areas.
• Two speeds. All models feature
two speed operation, including
timer equipped models.
• Adjustable Timer. Vortice Lineo
products are also available
with an adjustable, from 3 to 20
minutes, overrun timer.
• Double insulation. No earth is
required.
• Self-extinguishing V0 plastic.
All models are constructed in
V0 grade plastic to guarantee
the highest available selfextinguishing rating as well as
excellent mechanical strength.
• Eco-friendly.
All
Lineo
components can be easily
disassembled and are designed
to be recyclable and to comply
with the requirements of Article
4 of the “WEEE” directive
(waste electrical and electronic
equipment). The products are
carefully designed to provide an
extended life cycle and to provide
a low environmental impact both
in manufacture and use.
• Speed adjustable. All models
can be speed adjusted with the
optionally available controllers.
20
• Intelligent. Vortice Lineo products
are capable of advanced
functionality
in
combination
with optional sensor units for
monitoring humidity, detecting
persons, ambient temperature,
pollutant levels and air quality.
• The entire Lineo range is fitted
with ball bearing motors for a
minimum 30,000 hours operation
without mechanical malfunction.
• Safe. Safety, power rating,
protection rating (IPX4 to EN
60529) and insulation are
certified by the IMQ (Quality
Mark Institute), the Italian national
certifying agency.
• Optimum energy efficiency. Our
research programmes have
enabled us to obtain the best
possible ratio between running
costs and performance.
• Overload protection. The top
of the range models feature a
manual reset limiter on the motor.
Other models are equipped with
thermal cut-out switch.
• Compliance to standards. The
entire range of Vortice Lineo
extractors has been constructed
tocomplywithCEIEN60335-280-1997. Performance conforms
toUNI10531(CategoryD).They
beartheCEMarkforcompliance
with the Low Voltage Directive
(LVD)
and
Electromagnetic
CompatibilityDirective(EMC).
Lineo 200 / 250 / 315
LONG LIFE: 30,000 hours




 Quick, easy installation. The mounting brackets
supplied with the unit make installation quick and easy.
The junction box can be rotated to fit the mounting point
for even simpler installation. Mounting bolts included.
 Simple maintenance. Lineo products are equipped
with a unique double-lever closure which allows the
fan unit to be removed in just a few seconds without
affecting the installation as a whole. Instructions clearly
show that screws should be reinstalled on installation.
Refitting the unit is just as quick and easy.
VORTICE Lineo In-line Mixed Flow Extractor Fans
DIMENSIONS (mm.)
Model
Lineo 200 V0
Lineo 250 V0
Lineo 315 V0
Code
17007
17009
17010
A
300
385
448
ØB
196
247
312
C
125.5
152.5
188.5
D
260.5
317
392.5
E
234.5
300
361.5
F
140
176.5
220.5
L
235
292
359
Gr.
3700
7000
11300
TYPICAL INSTALLATIONS
As a single unit at the duct inlet
As a single unit within the duct
As a single unit at the duct outlet
In series (doubles the pressure)
In parallel (doubles the air flow)
In parallel for rectangular ducts
Vortice Lineo extractors can be mounted in a wide range of options - at the beginning, middle or end of the air duct and horizontally, vertically, against walls, ceilings, false ceilings or
any flat surface. One of the main features of the new Vortice Lineo range, in addition to ease of installation, is the fact that the fan unit can be removed from situ, for inspection and
maintenance, in just a few seconds. Vortice Lineo units can be fitted to standard round section pipes and to rectangular air ducts (using unique special mounting accessories). The
integrated IPX4 rated electrical junction box has an airtight cover. The product is supplied complete with a bag of accessories including anchor bolts and plugs, cable clamps and
grommets.
21
SAFETY GUARANTEED AND CERTIFIED
The IMQ mark certifies that the product is manufactured in compliance with the provisions of
establishedsafetystandardsEN60335-1andEN60335-2-80.theLowVoltageDirective(LVD)andthe
Electromagnetic Compatibility Directive (EMC). IMQ further guarantees regular, constant production
quality monitoring.
TheIMQmarkisequivalenttothefollowingEuropeanmarks:
PERFORMANCE AND SILENCE GUARANTEED AND
CERTIFIED BY IMQ PERFORMANCE
IMQPERFORMANCEisanindependentqualitymarkwhichcertifies,tointernationalstandards*,the
performance (flow rate and pressure) and noise levels of the product.
22
PERFORMANCE CURVE
Pa
750
mmH 2O
75
32
600
60
24
450
45
400
mmH 2O
40
40
320
30
240
500
mmH 2O
50
400
300
Lineo 200 V0 - T V0
Pa
Lineo 200 V0 - T V0
200
20
160
16
300
30
100
10
80
8
150
15
0
0
0
m 3/h
l/s
0
0
250
500
750
1000
69
139
208
278
Single
Pa
qv
0
0
1250
m 3/h
0
500
1000
1500
2000
2500
347
l/s
0
140
280
420
560
700
In parallel
Lineo 250 V0
mmH 2O
Pa
75
600
60
600
60
480
450
45
360
m 3/h
0
l/s
Lineo 250 V0
Pa
100
48
800
80
36
600
60
30
240
24
400
40
150
15
120
12
200
20
600
900
1200
1500
l/s
83
166
250
333
416
0
Single
Pa
qv
mmH 2O
1000
100
800
600
0
0
m 3/h
0
600
1200
l/s
0
165
335
In parallel
Pa
Lineo 315 V0
150
80
1200
120
60
900
90
1800
500
2400
3000
670
835
400
40
600
60
200
20
300
30
0
0
0
500
1000
1500
2000
2500
l/s
0
139
278
416
555
694
Single
qv
250
500
750
1000
1250
0
70
140
210
280
350
qv
Lineo 250 V0
APPLICATION:
Single - In parallel
In series
In series
0
Lineo 315 V0
350
700
97
194
qv
1050
1400
1750
292
389
486
LINEO 315 V0
(cod. 17010)
SPEED
max
min
APPLICATION:
Single - In series
0
0
0
m 3/h
l/s
0
0
0
m 3/h
l/s
LINEO 250 V0
(cod. 17009)
SPEED
max
min
In series
p
pt
qv
mmH 2O
1500
m 3/h
0
p
300
300
APPLICATION:
Single - In parallel
In series
mmH 2O
1000
LINEO 200 V0
(cod. 17006)
LINEO 200 T V0
(cod. 17026)
SPEED
max
min
In series
p
pt
qv
mmH 2O
750
0
0
m 3/h 0
Lineo 200 V0 - T V0
p
p
pt
Pa
0
500
1000
1500
2000
2500
140
280
420
560
700
qv
23
IN-LINE CENTRIFUGAL FANS
VKM SERIES
FEATURES
• Steel fan casing with zinc phosphate treatment and polymeric
coating.
• Equippedwitha1-phaseexternalrotormotor,ballbearingsand
automatic reset thermal overload protection.
• Speedcanbeadjustedusinganoptionalcontroller.
• Wall or ceiling mounting at any angle with fastening brackets
supplied with the unit.
• IPX4protectionrating.
• VKM...Qforlow-noisedesignoption
VKM 150 / 200 / 250 / 400
VKM 355 Q
VKM 150 / 200 / 250
VKM 355 / 400
DIMENSIONS (mm.)
MODEL
24
ØD
ØD1
B
B1
L
L1
L2
L3
VKM 150
149
304
349
309
220
25
25
30
VKM 200
198
344
390
350
240
25
29
40
VKM 250
248
344
390
350
249
25
31
40
VKM 355 Q
353
460
522
522
506
60
60
70
VKM 400
398
570
663
634
570
60
60
70
VENTS VKM Series In-line Centrifugal Fans
CFM
CMH
NOISE
dB 
m
2705
326
555
47
-22+55
5.4
0.67
2375
559
950
48
-25+50
6.6
194
0.85
2790
771
1,310
52
-25+50
7.3
230
233
1.06
1375
1,300
2,210
58
-25+45
12.8
230
460
2.23
1370
1,795
3,050
61
-40+80
20.0
MODEL
VOLTS
  Hz
TTS
MPS
PM
VKM 150
230
98
0.43
VKM 200
230
154
VKM 250
230
VKM 355 Q
VKM 400
I VOLUME
M. OPETING
TEMP. C
T.
kg.
Pressure,
Pressure,
P [Pa]
P [Pa]
PERFORMANCE CURVE
Air capacity, [m 3/h]
Pressure,
Pressure,
P [Pa]
P [Pa]
25
26
Industrial Commercial Fans
PROPELLER FANS
V SERIES PANEL FANS
METAL FAN BLADES WITH METAL FRAME
VWZ 200 / V4S2561
DESCRIPTION
The fans consist of a motor and impeller fixed to a
square fan casing (or wall-plate) by support arms and
screws. The motor and impeller may be removed easily
while leaving the wall-plate in place.
The fans have five blades pressed from a single piece
of sheet steel. Impeller, motor casing and wall plate
have a scratch and chemical resistant epoxy coating.
Dust accumulation is prevented by the smooth design
of the motor casing. The special construction of the
motor-impeller combination in the wall plate ensures a
highly stable assembly and exact centering. The motor
has an integral electrical supply cable.
TECHNICAL DETAILS
electrIcal sPecIFIcatIons
VWZ200:220V/60Hz.,1Phase
V4S2561:220V/60Hz.,1Phase
APPLICATIONS
Motors
The fans are powered by a direct drive electrical motor
with fully enclosed ball bearings. The motors have
insulationClassBwindingsandareprotectedtoIP44
standard.
The fans are aerodynamically designed to give
maximum air volume and pressure with minimum
electrical consumption. They can be used as extractors
or inlet fans on their own, or fitted in or on ducts and
other types of equipment.
aMBIent teMPeratUre
Suitableforuseinambienttemperaturebetween-20°C
and+70°C.
MaIntenance
The fans require only cleaning. The motor bearings
require no lubrication or maintenance.
28
MODEL
BLADE Ø
mm. (in.)
RPM
WATTS
AMP
VWZ 200
200(8”)
1,570
38
V4S2561
250(10”)
1,660
40
AIR VOLUME
CMH
CFM
0.22
550
323
0.20
1,100
647
INDOLA V Series Panel Fans (Metal Fan Blades w/ Metal Frame)
DIMENSIONS (mm.)
E
F
A
B
C
MODEL
A
B
C
E
F
VWZ 200
230
280
63
23
200
V4S2561
280
330
68
23
250
PERFORMANCE CURVE
NOTE:
AircapacityvaluesaredeterminedbytheuseoftheDIN24163/NEN1048-IItestingmethod.Thevaluesobtainedfollow
closelythosewhentestingaccordingtoBS848part1.Theaircapacityvaluesaremeasuredovertheairflowtestrig.Air
capacity values given in cubic meters per hour (m3h).StaticpressurevaluesaregiveninPascal:Pst(Pa).
29
PROPELLER FANS
V SERIES PANEL FANS
STAINLESS STEEL FAN BLADES
METAL FRAME
V4S3062 / V4S4061
V4S5061 / VDBZ 500
V8S9261 / V8T9261
WITH
DESCRIPTION
The fans are equipped with stainless steel blades. The
motor and impeller may be removed without removing
the wall plate. The extremely robust construction
means that standard models can be used in harsh
environments. Epoxy coating is provided as standard.
Therangealsoincludes500mmmodel(VDBZ)witha
six-bladed impeller for increased volume and pressure
development. The unit has three motor support arms
with four fixings.
TECHNICAL DETAILS
Motors
The fans are powered by a direct drive electrical motor
with maintenance-free fully enclosed ball bearings.
AllmodelsconformtoClassFinsulation(resistantto
temperaturesupto155°C)andareprotectedtoIP55.
The motors have integral thermal protection: a
‘thermal cut-out’ protects the motor on the basis of
the maximum permissible winding temperature so the
motor is protected throughout the entire control range.
The external contacts of the thermal cut-out could be
used with a special motor protection switch.
30
MODEL
BLADE Ø
mm. (in.)
NO. OF
BLADES
V4S3062
300(12”)
4
V4S4061
400(16”)
4
V4S5061
500(20”)
4
VDBZ 500
500(20”)
6
V8S9261
920(36”)
3
V8T9261
920(36”)
3
VOLT
(Phase)
240
(1 phase)
220-240/
380-415
(1 phase)
240
(1 phase)
240/420
(3 phase)
RPM
WATTS
AMP
1,600
120
1,600
AIR VOLUME
CMH
CFM
0.5
2,250
1,325
290
1.6
5,300
3,120
1,600
300
2.3
7,450
4,385
1,600
650
2.6
11,260
6,627
800
710
4.2
19,100
11,240
800
570
3.4/2.0
19,100
11,240
INDOLA V Series Panel Fans (Stainless Steel Fan Blades w/ Metal Frame)
DIMENSIONS (mm.)
A
F
B
A
B
E
D
C
MODEL
A
B
C
D
E
F
V4S3062
350
395
292
186
106
330
V4S4061
444
495
292
186
106
430
V4S5061
565
635
292
176
116
535
VDBZ 500
565
635
360
232
133
500
V8S9261
1010
1070
403
215
188
973
V8T9261
1010
1070
403
215
188
973
PERFORMANCE CURVE
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
120
1
2
3
4
5
6
90
6
80
5
60
40
1
2
6
=
=
=
=
=
=
V4 S30 62
V4 S 4 0 61
V4 S5 0 61
V DB Z 5 0 0
V8S9261
V8T 9261
3
4
20
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
NOTE:
31
PROPELLER FANS
V SERIES PANEL FANS
POLYPROPYLENE FRAME
V4S3060 / V4S4060
V4S5060 / V6S7160
V4T5060 / V6T6360 / V6T7160
WITH
DESCRIPTION
A compact and modern looking fan with polypropylene
frame, stainless steel blades, and aluminum parts for
thehousingandsupport.Thebladescomein4and6
variations which are directly driven by an inside-rotor
motor with fully enclosed greased for life ball bearings
for continuous running. Steel parts of rotor and stator
are multiwax coated for protection against corrosion.
Motor windings are provided with three insulation films
for maximum protection against humidity.
AllmodelsconformtoIP55ratingandClassFinsulation
(resistanttotemperaturesupto155°C).Allmaterials
can be recycled.
32
MODEL
BLADE Ø
mm. (in.)
NO. OF
BLADES
V4S3060
300(12”)
4
V4S4060
400(16”)
4
V4S5060
500(20”)
4
V4T5060
500(20”)
4
V6T6360
630(25”)
6
V6S7160
710(28”)
6
V6T7160
710(28”)
6
VOLT
(Phase)
240
(1 phase)
240
(1 phase)
240
(1 phase)
240/420
(3 phase)
240/420
(3 phase)
240
(1 phase)
240/420
(3 phase)
RPM
WATTS
AMP
1,600
120
1,600
AIR VOLUME
CMH
CFM
0.5
2,250
1,325
290
1.3
5,300
3,119
1,600
300
2.3
7,450
4,384
1,600
310
1.6/0.9
7,450
4,384
1,000
470
2.1/1.2
11,800
6,945
1,000
720
3.5
16,000
9,416
1,000
700
2.7/1.6
16,050
9,446
INDOLA V Series Panel Fans (Stainless Steel Fan Blades w/ Polypropylene Frame)
DIMENSIONS (mm.)
F
A
E
G
D
B
C
MODEL
A
B
C
D
E
F
G
V4S3060
350
395
173
67
106
314
20
V4S4060
444
495
186
80
106
430
20
V4S5060
565
635
176
60
116
535
20
V4T5060
565
635
213
80
133
527
10
V6T6360
750
835
220
100
120
660
30
V6S7160
810
885
230
90
140
740
30
V6T7160
810
885
230
90
140
740
30
(Pst - Pa)
PERFORMANCE DATA (m3h)
120
1
2
3
4
5
6
7
100
7
80
6
40
4
2
60
5
3
=
=
=
=
=
=
=
V4 S30 6 0
V4 S 4 0 6 0
V4 S5 0 6 0
V4T5 0 6 0
V6T636 0
V6S716 0
V6T 716 0
1
20
0
2000
4000
6000
8000
10000
12000
14000
16000
[m3/h]
*Allaircapacitieswithoutwireguard.
33
PROPELLER FANS
V SERIES PANEL FANS
POLYPROPYLENE FRAME
VWZ 630 / 710
VDZ 630 / 710
WITH
DESCRIPTION
Plate mounted axial flow fans with high air-capacity and
minimumpowerconsumption.Wallmountingplateis
fabricated from reinforced polypropylene for horizontal
or vertical mounting.
TECHNICAL DETAILS
VWZ630/710:220-240V/60Hz,1Phase
VDZ630/710:220-240V/380-415V/60Hz,3Phase
ConformstoIEC/CEEElectricalSafetyStandards
Motors
Direct drive inside-rotor motors with fully enclosed and
greased for life ball bearings according to IEC 34-1
standard. Motor windings are provided with a multiple
impregnation for maximum protection against humidity.
ThemotorshaveinsulationClassBwindingsandare
protectedtoIP54.
The integral overheat protector is fitted in the motor.
Capacitors and wiring block are situated inside the
motor housing directly under the cover. Fully speed
controllable by electronic regulator, transformer or
frequency controller.
APPLICATIONS
Perfectly suitable where higher air capacities in
combination with elevated static pressures are
required.
Highlyrecommendedfor:
•largerindustrialbuildings
•largerwarehouses
aMBIent teMPeratUre
Suitableforuseinambienttemperaturebetween-20°C •indoorcarparks
•variousindustrialapplications
and+70°C.
•airhandlingunits
•livestockhouses
34
MODEL
BLADE Ø
mm. (in.)
RPM
WATTS
AMP
VWZ 630
630(25”)
1,115
460
VWZ 710
710(28”)
1,115
VDZ 630
630(25”)
VDZ 710
710(28”)
AIR VOLUME
CMH
CFM
2.00
13,200
7,769
780
3.20
17,710
10,423
1,115
400
1.70
13,200
7,769
1,115
570
2.70
17,880
10,523
DIMENSIONS (mm.)
A
B
F
A
B
E
D
C
MODEL
A
B
C
D
E
F
VWZ 630
750
835
340
220
120
630
VWZ 710
810
885
355
215
140
710
VDZ 630
750
835
340
220
120
630
VDZ 710
810
885
355
215
140
710
PERFORMANCE CURVE
NOTE:
35
PROPELLER FANS
COMPACT PANEL FANS
POLYPROPYLENE FAN BLADES
POLYPROPYLENE FRAME
WIF 400 / V4S4960
WITH
DESCRIPTION
A very compact fan with non-protruding motors and
equipped with polypropylene fan blades and rigid
polypropylene wall mounting plate. Stainless steel
motor supports. The fan is usable in both air directions
byturningtheblades180°.
TECHNICAL DETAILS
WIF400/V4S4960:220-240V/60Hz,1Phase
ConformstotheIEC/CEEelectricalsafetystandards
Motors
Totally enclosed direct drive motor, greased for life,
maintenance-freeballbearingsaccordingtoIEC34-1
standard, is designed for continuous running. The
motors are fitted with internal over-heat protection.
The leads in the terminal box allows the protector to be
wired in series with the winding giving automatic restart
or to a starter giving manual restart. Motor windings
are provided with multiple impregnation for maximum
protection against humidity.
APPLICATIONS
For use in any installation that requires standard airflow
with or without variable speed control with easy and
flexible installation. Axial types available with various
mounting possibilities. Suitable for cooling, heating or
ventilation and many other situations where a fan is
The wiring box conforms to IP55 standard, with required. The fan may be used indoors and outdoors
capacitors, is connected by a 7 core cable of (IP55).
approximately 80 cm. length to motor. Insulation
Class:F.
aMBIent teMPeratUre
and+70°C.
36
MODEL
BLADE Ø
mm. (in.)
RPM
WATTS
AMP
WIF 400
400(16”)
1,600
250
V4S4960
500(20”)
1,640
420
AIR VOLUME
CMH
CFM
1.10
5,400
3,178
2.10
8,400
4,944
INDOLA Compact Panel Fans (Polypropylene Fan Blades w/ Polypropylene Frame)
DIMENSIONS (mm.)
A
F
B
A
B
D
E
C
MODEL
A
B
C
D
E
F
WIF 400
444
495
150
30
113
400
V4S4960
565
635
150
30
143
500
PERFORMANCE CURVE
1 = WIF 400
2 = V4 S 4 9 6 0
1
2
NOTE:
37
PROPELLER FANS
FLANGED TUBE SERIES
COMPACT SHORT CASE FANS
TWIF 400 / T4S4961
DESCRIPTION
The compact design of the motor and impeller
assembly, mounted inside the slim outer casing,
features a complete fan unit which is both shorter and
lightweight. The casing is made of rolled steel plate and
epoxy-powder coated (off-white) for full anti-corrosion
resistance. The flange dimensions and hole positions
of the drilled flanges at both ends of the casing are to
ISO6580standards.
The dynamically balanced stainless steel impellers are
resistant to outside conditions and abrasive airstream.
The impellers are factory set to the exact blade angle.
The direction of airstream is indicated on the fan unit by
an“arrow.”Theunitallowsinstallationatanyangle.
TECHNICAL DETAILS
TWIF400/T4S4961:220-240V/60Hz,1Phase
ConformstoIEC/CEEElectricalSafetyStandards
AccordingtoRadioSuppressionGuideline82/499/EEC
APPLICATIONS
Forinstallationinallkindsofductsystems:
•Workshops
Motors
Direct drive motors with fully enclosed, greased for •CommercialBuildings
life ball bearings according to IEC 34-1 standard. •IndustrialBuildings
ThemotorshaveinsulationClassFwindingsandare •Carparks
•StationBuildings
protectedtoIP55.
The integral overheat protector is fitted in the motor.
Excellent speed control by either two or three wire
connection.Thewiringbox(IP55),withthecapacitors,
is mounted on the fan casing outside the airstream.
aMBIent teMPeratUre
and+70°C.
38
MODEL
BLADE Ø
mm. (in.)
RPM
WATTS
AMP
TWIF 400
400(16”)
1,550
230
T4S4961
500(20”)
1,600
440
AIR VOLUME
CMH
CFM
1.50
5,390
3,172
2.30
8,420
4,955
INDOLA Flanged Tube Series Compact Short Case Fans
DIMENSIONS (mm.)
E
F
C
A
B
MODEL
A
B
C
E (N)
F
TWIF 400
450
486
160
12(8x)
400
T4S4961
560
596
170
12(12x)
500
PERFORMANCE CURVE
1 = TWIF 400
2 = T4 S 4 9 61
1
2
NOTE:
39
RECIRCULATION FANS
CASING / CONE FANS
EMI 130
DESCRIPTION
The aerodynamic design casing of EMI 130 fan with its
3-dimensionally shaped polypropylene blades provide
maximum air performance ideal for poultry, piggery
and greenhouse applications. The metal casing and
the integrated, aerodynamic construction create a
strong unit and makes it more stable through the
smooth connection of the compact pulley and the
diagonal supports. The non-corrosive attachments,
aluminum pulley and the highly protected impellers
make EMI 130 withstand the aggressive climates, thus
providing consistent maximum performance for a long
period of time.
TECHNICAL DETAILS
EMI130 :240/420V/60Hz,3Phase
:240V/60Hz.,1Phase
Motor
 Maintenance in a jiffy. The wire guard of the EMI 130
Withits3-phasevariablespeedmotor(1-phase motor
Casing Fan can be opened and hinged on either side
also available), the fan provides an excellent ratio
thus cleaning time can be finished more quickly and
accurately. All the 4 corner covers open up together with
of airflow to electricity consumption thus saving on
the removal of the guard. The covers already prevent
energy and installation costs. The fan motor is dust
most dust collection and any remaining parts can be
and moisture protected to IP55 standard. Insulation
removed quickly. All other parts are within reach and
ClassF(155°C).
40




rather easy to clean for optimal hygiene. The stretchable
V-belt can be installed without belt tightener and does not
need adjusting after installation. This belt provide a long
lifetime for the pulley and hub construction of the fan.
 Logistic wise construction. The symmetric parts of the
casing and internal construction, including the corner
covers, allow easy installation. All the parts are easy
to assemble and are partly exchangeable. The number
of connections is absolutely reduced to a minimum. To
prevent problems during installation, the EMI 130 Casing
Fan is designed for a “one-way” construction: the motor,
V-belt, pulley and impellers form one unit.
 Wide range of options. For standard applications, the
3-blade version of EMI 130 Casing Fan can be used,
however; for higher pressures (from 0.25 - 0.4 SP) a
5-blade version is available.
The EMI 130 Cone Fan, with shutters on the inside,
provides further possibilities for increasing the airflow
capacity. The cone is made of 4 easy to assemble
parts.
INDOLA EMI 130 Casing / Cone Fans
MODEL
BLDE  NO. OF
mm. in. BLDES
CT. 
V4D1422 | 21236
V4D1550 | 21236
(blue blades)
PM
TTS
1300
(51”)
3
240/420
(3 phase)
I VOLUME
MP
240
(1 phase)
V4E1521 | 21236
EMI 130
VOLTS
Phase
CMH
CFM
45,600
26,836
7.1
580
1,650
5.2/3.0
DIMENSIONS (mm.)
MODEL
A
B
C
D
E
F
G
EMI 130 Casing Fan
1380
1380
271
360
96
–
–
EMI 130 Cone Fan
1380
1591
1276
782
275
133
85
PERFORMANCE CURVE
41
RECIRCULATION FANS
BASKET FANS
K4D130 / K4E5011
DESCRIPTION
In factories, an optimal distribution of air is absolutely
necessary. The temperature in factory halls can
increase fairly quickly in the summer months. This
has direct consequences for productivity and working
conditions. Solutions for cooling the air in factory halls
are often too expensive or technically not feasible.
RecirculationBasketFansareanidealsolutioninsuch
cases. A combination of air circulation and air extraction
solves the problems described above. Constant air
distribution also ensures a pleasant work environment
and eliminates heat stress.
The Recirculation Basket Fans provide a constant
supply of cool air. In addition, the air is circulated
throughout the building, which means that blind areas
are avoided. This keeps the air supply in the building
stable.
Onthemarketitisadvisedtoinstallafanevery12-14
meters. However the number of rows and fans needed
in the building depends on the density, construction and
utilization, as well as on local climatic conditions. The
low noise level of the fan enables a calm environment.
For security reasons the 3-blade fan is provided with a
basket on both sides. The unit is very easy to install at
thetrussofthebuilding.Becauseofthespecialbelt
(K4D130model),abelt-tightenerisnotnecessary.
K4D130-3PP-55FC
ADVANTAGES
• Highlevelofairmovement(upto48,000m3h at 0 Pa)
• High throw
• Variable speed
• Simple, user-friendly construction
• High efficiency
• Low noise level
• IP55ingressprotection
K4E5011 | 21100
MODEL
BLADE Ø
mm. (in.)
VOLTS
(PHASE)
RPM
WATTS
AMP
K4E5011 | 21100
500(20”)
240(1PH)
1,600
310
515
1,240
K4D130-3PP-55FC 1300(51”) 240V/420V(3PH)
42
INDOLA Recirculation Basket Fans
AIR VOLUME
CMH
CFM
1.4
7,850
4,620
4.0/2.3
48,000
28,248
DIMENSIONS (mm.)
MODEL
A
B
C
D
1350
1635
364
1300
K4E5011 | 21100
K4D130-3PP-55FC
PERFORMANCE CURVE
Angle (º)
Fan distance (m)
Fan distance
Angle (º)
K4D130
Ex.: Ø Impeller = 90 cm
Angle = 15 º
Fan distance = 9 m
60
70
80
90
100
110
Impeller diameter (cm)
120
130
140
43
MISTING FANS
LOW PRESSURE NOZZLE SYSTEM
ADVANTAGES
TB4E / TB4D / TB6E
• Lowers the temperature in greenhouses
• Reduces heat stress
• Reliablesystem:3-yearwarrantyonthefanmotor
• Optimal distribution of the mist
• Flexible to adapt to local circumstances
• Low maintenance system
• Climatecontrolatlowcost
• Easy to install
coolInG
During hot periods it becomes necessary to reduce
the temperature in the barns. The highly productive
animals, dairy, pork and poultry, suffer from heat stress
and technical results (feed intake, lower fertility, etc.) are
significantly reduced. The Indola Low Pressure Nozzle
System Misting Fan evaporates very small water drops
to reduce the temperature in the barns. The drops are
distributed through the
combination of an ultra
fine nozzle system and
a recirculation fan. By
using up to 8 separate
nozzle outlets, the
water is constantly and
immediately evaporated
by the high output of air;
thus, the temperature is
reduced significantly.
The heat stress for
production animals is
a critical parameter to
observe.
Too much
heatstresscanreducemilkproductionupto25%orlimitweightgainfor
finishingpigsupto40%.WiththeIndola Low Pressure Nozzle System
Misting Fan, the farm manager is able to adapt the temperature at animal
level to a more than satisfactory level. The recirculation fan enables the
misted air to be distributed evenly
throughout the house.
relIaBle sYsteM
All the components and parts of
the system used are specifically
designed for the aggressive climates
in barns. The Indola Low Pressure
Nozzle System Misting Fan is
known for its reliability and resists
44
INDOLA Low Pressure Nozzle System Misting Fans
high temperatures and severe
climatic conditions in the dairy,
pork or poultry houses. A 3-year
warranty on the watertight motor
(IP55)isoneofthewaystoexpress
the high durability. The nozzles are
made of chemical and acid-resistant
material. The bridgeless design of
the nozzles eliminates dripping. If
the water pressure gets below 4
bar, the water output by the nozzles
automatically stops. Evaporating at
too low water pressure increases
the chance of water drops.
MIst dIstrIBUtIon
The high throw of the fan assures
an optimal spread of the water mist
creates an equal climate throughout
the barn. Since the nozzles are
incorporated in the grill, air volume
losses are hardly existing. At a
relativelylowpressureof4bar,the
nozzles distribute average drops of
100 micron or MMD (mass medium
diameter). Under suitable conditions
these drops evaporates instantly.
Onaverage60%ofthedropssizes
arebetween0-50microns.
FleXIBIlItY
The Indola Low Pressure Nozzle System Misting Fan offers the flexibility
to install 1 - 8 nozzles. In the standard execution of the misting fan, 8
nozzles are used. Due to local circumstances (humidity, temperature,
etc.), the number of nozzles can be lower.
MaIntenance
The nozzles can easily be changed
and are, if necessary, replaced in
seconds. The front grille can easily
be replaced by a new grill with incorporated nozzles. The motor and fan
can be cleaned with a high pressure system to optimize hygiene. Another
unique feature of the system is the ability to flush the water line. To be able
to clean the water tubes thoroughly and to avoid stagnant water, the tubes
are installed in an open circle.
clIMate control at loW cost
The recirculation fan can be easily integrated in existing climate control systems. A water pump creating a
waterpressureof4-5barisarelativelowinvestmentforacoolingsystem.Throughatimerand/orahygrostat/
thermostat, the manager can constantly influence the temperature and humidity in the house in a simple way.
The Indola Low Pressure Nozzle System Misting Fan has the unique feature that it can be used as a cooling
systemANDasarecirculationsystemtocreateanuniformdistributionoftheheat;reallya“2-in-1”system!
easY to Install
All the connections of the water line are easily fixed in a robust way. The complete water distribution set is
integratedinthefangrillandthereforeeasytomount.Therecirculationfanissuppliedwith2suspensionholes
andisinstalledinajiffy.Becauseofthelowpressuresystemstandardwaterdistributionlinescanbeusedfor
thewatersupplyoftheindividualfans.Thenozzlesystemwillbedeliveredasaseparateset,whichcontains:
-wireguardfor50cmgreenhousefan
-8nozzleswithhosesandcanbeeasilymountedonthe50cmrecirculationfan.
MODEL
BLADE Ø
mm.
RPM
VOLT
dB (a)
7m
THROW
(m)
WATTS
AMP
TB4E50Q
518
1,400
230
55
58
390
TB4D50Q
518
1,400
230/400
55
58
TB6E50Q
518
900
230
51
53
AIR VOLUME
CMH
CFM
WEIGHT
(kg.)
1.8
7,760
4,567
17
400
1.9/1.1
7,760
4,567
17
300
1.4
7,060
4,155
17
WATER SUPPLY DATA
NO. OF NOZZLES
1 to 8 nozzles
SUPPLY PER NOZZLE
7.5 liter/hour (at 4.0 bar)
SUPPLY PER FAN
60 liter/hour (at 4.0 bar)
REQUESTED WATER PRESSURE
4 - 5 bar
NO. OF FANS
flexible amount per area/animal/local condition
45
VENTILATING FANS
INDUSTRIAL OSCILLATING FANS
• Over 30 years in fan manufacturing expertise
• High attention to product quality
• Materials from Japan
WW 255 / WS 255
WSW 180
TECHNICAL DETAILS
Motor
: squirrel cage induction type with capacitor start
and run
Guard
: highqualitychromium-platedordinaryormodified
wire guard with easy locking clips
Fanblade
: 18”(457mm.)or25½”(648mm.)reinforceddiecast aluminum blade
Speed
: 3speedcontrol
Adjustment : adjustable tilt angle from 15° downwards to 60°
upwards
Swivel
: 90°,130°orfixed
Voltage
: 200-240V,60Hz,1-phase
Pedestaltype : heightadjustabletubewithstablecastironbase
and non scratch foot pads
Wallmounted : robustbendtubewithsafetywallmountkit
WS-255
Modified Guard
WSW-180
WW-255
MODEL
WSW-180
BLADE
SIZE
SPEED
in. (mm.)
18(457)
WW-255
25.5(648)
WS-255
46
AIR VOLUME
RPM
POWER
(Watts)
CURRENT
(Amp)
NOISE
LEVEL
dB(A)
CMH
CFM
1
1,100
83
0.38
40
144
85
2
1,250
98
0.47
44
186
110
3
1,400
124
0.60
48
229
135
1
1,100
130
0.50
48
9,089
5,349
2
1,250
150
0.70
52
9,881
5,815
3
1,400
180
0.80
57
10,980
6,462
RIO Industrial Oscillating Fans
DIMENSIONS (mm.)
MODEL
WSW-180
WW-255
WS-255
B
BLADE
SIZE
A
18”
20”
455
508
25½”
27”
84”
64¼”
14”
648
685
2135
1630
355
max.
min.
C
D
E
F
G
WEIGHT (kg.)
13”
23”
18”
355
584
455
22”
32”
18”
5½”
wall
pedestal
560
810
455
140
13.43
21.56
PERFORMANCE CURVE (1,400 RPM)
47
VENTILATING FANS
INDUSTRIAL EXHAUST FANS
WV SERIES
TECHNICAL DETAILS
Motor
: totally enclosed motor with ball bearings; the
capacitorishousedinthemotorforfansof12”,
15”,18”and24”
Fanblade
: 4 pressed steel blades fitted for cast aluminum
alloy hubs, fully balanced after assembly (9½”
fans are of 6 blades)
Mountingarms : withresilientcushiontoreducethetransmission
of vibration to the fixing surface
Voltage
: 1-phase;100/110,110/115,200/230or230/250V
3-phase;200/220,220/250,346/380or380/440V
other voltages are available upon request
Finish
: glossy grey enamel; other finishes are available
upon request
WV21 (9.5”) front
WV21 (9.5”) 6-blades
48
MODEL
BLDE
SIE
in. mm.
VOLTGE
WV21 - 9.5
9½(241)
220
WV21 - 12
12(305)
WV21 - 15
I VOLUME
POE
atts
CUENT
mp
NOISE
LEVEL
dB
CMH
CFM
1,300
40
0.25
48
747
440
220
1,400
115
0.60
57
1,937
1,140
15(381)
220
1,400
180
0.90
63
3,908
2,300
WV21 - 18
18(458)
220
1,400
315
1.60
67
6,457
3,800
WV21 - 24
24(610)
220
1,400
990
5.00
73
16,142
9,500
PM
RIO WV Series Industrial Exhaust Fans
DIMENSIONS (mm.)
MODEL
BLADE SIZE
A
B
C
D
WV21 - 9.5
241
294
244
273
157
WV21 - 12
305
388
325
312
244
WV21 - 15
381
473
400
370
267
WV21 - 18
458
559
476
440
334
WV21 - 24
610
725
632
570
370
PERFORMANCE DATA
CFM
MODEL
at static pressure of WG
at free
air flow
0.05
0.10
0.15
0.20
0.30
0.40
WV21 - 9.5
440
370
—
—
—
—
—
WV21 - 12
1,140
1,050
960
860
710
460
—
WV21 - 15
2,300
2,200
2,100
2,020
1,900
1,600
1,300
WV21 - 18
3,800
3,750
3,650
3,600
3,500
3,200
2,800
WV21 - 24
9,500
9,400
9,150
8,900
8,600
8,000
7,000
49
TUBE AXIAL FLOW FANS
BELT-DRIVEN SERIES
WAB SERIES
TECHNICAL DETAILS
Motor
Fanblade
: totallyenclosedmotor
: die-cast aluminum alloy, angle of the
blade c an be adjuste d
Casing
: steel,hotdipgalvanized
Accessories(optional) : rearfront-safetyguard
companion flange
MODEL
BLADE
SIZE
in. (mm.)
VOLT
(PHASE)
WAB-1932
19 (490)
380
(3 PH)
AIR VOLUME
RPM
POWER
(HP)
CURRENT
(Amp)
NOISE
LEVEL
dB(A)
CMH
CFM
2,800
4
6.4
82
13,423
7,900
DIMENSIONS (mm.)
A
B
D
F
H
E
C
MODEL
WAB-1932
50
A
B
C
D
E
23⅛in.
21⅜in.
17 in.
15⅛in.
23½in.
588mm. 542mm. 432mm. 384mm. 598mm.
RIO WAB Series Tube Axial Flow Fans
F
Nos.
12
G
Dia.
1/2in.
13 mm.
Nos.
8
H
31⅞in.
810 mm.
ROBOTECH
JET FANS
UNDERGROUND PARKING EXHAUST FANS
TIV 200D / 250D
CBF 350S
APPLICATIONS
Ventilation of underground parking lots, shopping centers, factories
and warehouses.
FEATURES
• Securesagoodspaceduetonon-installationofduct.
• Goodinstallationandmaintenance.
• IP52motor.
• ClassEinsulation.
TIV 200D / 250D
CBF 350S (Round type, 1 nozzle outlet)
LxWxH = 1340 x 410 x 410 mm
DIMENSIONS (mm.)
250
Model No.
TIV 200D
TIV 250D
45
Ø 190
Ø 215
Ø 295
675
565
70
245
160
245
295
990
MODEL
BLDE
SIE
in. mm.
PHSE 
VOLTS
  Hz
PM
TTS
TIV 200D
8(200)
1/220
3120
TIV 250D
10(250) 1/220
3135
CBF 350S
1/220
I VOLUME
MPS
NOISE
LEVEL
dB
CMH
185
0.90
59
220
1.07
600
CFM
STTIC
PESSUE
mm
T.
kg.
1,800
1,059
30.0
18
60
2,400
1,412
40.0
18
63
3,500
2,059
5.0
40
ROBOTECH Underground Parking Exhaust Jet Fans
51
PERFORMANCE CURVE
1 = TIV 200D
2 = TIV 250D
40
Pressure (mmAq)
35
30
25
20
2
1
15
10
5
0
400
800
1200
1600
Air volume (m3/h)
52
2000
2400
2800
High Capacity Fans
INLINE SQUARE CENTRIFUGAL FANS
ISQ Range
APPLICATIONS
Ductsupply/exhaust,filtersupply/exhaust,lownoise
cabinet, explosion resistant exhaust
PERFORMANCE RANGE
VolumeRange:upto49,000CMH
StaticPressureRange:upto920Pa
WheelDiameter:300-1000mm
Available:3Phase,380V/440V
PRODUCT FEATURE
• AMCAcertifiedsoundandairperformance
• WheelbalancinglevelG2.5
• Multi-discharge; motor can be multi-positioned
• “Wind-surferII”designbackwardinclinedcentrifugal
wheel, non-overloading
• Precise hyperbola Venturi inlet; noise and energy
loss caused by turbulence are reduced
• Square plug fan structure, easily installed
• Fan Type - belt drive or direct drive; fan is inline
cetrifugal type, with aluminum backward inclined
centrifugal wheel. The fan wheel Venturi have round
curved section to smoothly transit the air to the
wheel cone. The wheel is balance tested statically
anddynamicallytoG2.5levelasperISOstandard
No.1940.
• Motor-isIP54withinsulationclassFandiscarefully
matched to the fan load. Motor bearings are ball type
and need no lubrication.
• Fan Housing Material - the fan housing is made of
heavy gauge galvanized steel panel with thickness
adequate to support drive and motor. The square
housing has rectangular sleeve flanges to avoid
round/square transducer duct. The housing has
optional discharge directions and large access doors
on both sides which can be used to replace the motor
without removing the ready made duct.
• Drive (belt drive model only)
- Shaft: fan shaft is heat treated through soaking
furnacetoHB370hardnesslevel,andthesurface
hard film corrosion treated. The fan shaft is
balanced together with the wheel. Shaft design
speed at least exceeds 25% of the maximum fan
operation speed.
54
- Pulleys: fan pulleys are sized for a minimum of
150% of driven horsepower. The pulleys made of
cast iron type, keyed and securely attached to the
wheel and motor shafts. For easy removal of the
pulleys,conical(QD)typebushingsareutilized.
- Bearings: are selected for a minimum (L-10) life in
excess of 80,000 hours at maximum rated operating
speed. Bearing type are permanently sealed, relubricable pillow block metal ball bearings.
- Drive Support: drive assemblies are supported by
heavy gauge powder coated steel. The belt tension
are adjusted through the motor support plate; fan
shaft and motor shaft is always parallel.
- Protectioncover-ashaft/bearingcoverandabelt
cover are provided as standard configuration for
indoor application. If the fan is outdoor installed,
the motor and other drive parts shall be covered
by a weather hood (optional accessory) to assure
lasting durability.
INFINAIR ISQ Range In-line Square Centrifugal Fans
TYPICAL INSTALLATION
The ISQ is provided with universal mounting feet for installation in any horizontal or vertical position. These feet are
shipped loose for field installation in the desired location.
MOTOR WEIGHT TABLE
The ISQ configuration allows air to exit from any one sides
except the motor and motor opposite side of the unit at
jobsite. Remove the side panel of the desired outlet direction,
change it to flange, and seal the original flange, all the above
can be easily finished by contractors at jobsite.
MOTOR WEIGHT (Kg)
POWER
(kW)
2P
4P
6P
8P
0.18
14
13.5
14
16
0.25
14.5
14
14.5
17
0.37
15
14.5
16
24
0.55
15.5
15
17
28
0.75
15
16
22
30
1.1
16
21
24
32
1.5
21
23
32
40
2.2
24
33
41
64
3
33
35
63
78
4
41
41
72
105
5.5
63
65
81
115
7.5
70
76
118
145
11
110
118
145
160
15
122
137
180
235
18.5
142
170
231
290
55
OPTIONAL DISCHARGE
Remark: the codes at the top left corner indicate
the discharge and motor position
MTDLRH
Motor top, discharge is left, right and horizontal
Letter explanation
M : Motor
T : Top
D : Discharge
L : Left
R : Right
H : Horizontal
B : Bottom
DDLR
Direct drive, discharge is left and right
Letter explanation
D : Direct drive
D : Discharge
L : Left
R : Right
H : Horizontal
B : Bottom
56
CENTRIFUGAL UTILITY SET
CUS Range
APPLICATIONS
Process supply / exhaust, kitchen grease exhaust,
explosionresistantexhaust,ductsupply/exhaust
PERFORMANCE RANGE
StaticPressureRange:upto1,100Pa
PRODUCT FEATURE
• “Wind-surfer II” type aluminum backward inclined
centrifugal wheel, non-overloading
• Continuously welded housing, non-leak, rigid
structure, suitable for all outdoor weather condition
• Compactspace-savinghousingdesign
• Standard epoxy powder coating
• Fan Type - belt drive or direct drive. Fan wheels are • Drive (belt drive model only)
centrifugal, backward inclined, and constructed of
aluminum. The fan wheel Venturi have round curved
section to smooth the air flowing to the wheel cone.
The wheel is balance tested statically and dynamically
toG2.5levelasperISOstandardNo.1940.
operation speed.
Pulleys:fanpulleysaresizedforaminimumof150%
matched to the fan load. Motor bearings are reof driven horsepower. The pulleys made of cast iron
lubricable ball type. Motor and drives are mounted on
type, keyed and securely attached to the wheel and
vibration isolators, and out of the air stream to avoid
motor shafts. Motor pulleys are adjustable for final
grease or dirt accumulation.
system balancing. For easy removal of the pulleys,
• Structure - AMCA standard Spark B resistant
conical(QD)typebushingsareutilized.
construction of the fan’s aluminum wheel and inlet.
Bearings: are selected for a minimum (L-10) life in
An access door is provided to remove possible debris
inside the scroll.
speed. Bearing type are permanently sealed, re• Fan Housing Material - the fan casing is made of
lubricable pillow block metal ball bearings.
steel with thickness adequate to support drive and
motor. The scroll is fully welded. The fan surface is
heavy gauge powder coated steel, mounted on
alkali cleaned and phosphated, with electrostatically
vibration isolators. The belt tension are adjusted
black epoxy powder applied.
through the motor support plate; fan shaft and
motor shaft is always parallel.
- Protectioncover-ashaft/bearingcoverandabelt
cover are provided as standard configuration for
indoor application. If the fan is outdoor installed,
the motor and other drive parts shall be covered
by a weather hood (optional accessory) to assure
lasting durability.
Scroll is fixed by 8 housing bolts; housing
can be rotated at jobsite within limited
angle.
INFINAIR CUS Range Centrifugal Utility Set
57
OPTIONAL DISCHARGE
The rotation is identified from the view of motor side. The fan rotation must be specified before ordering; otherwise the fan is difficult to be installed if the
discharge direction is inconsistent with the design.
MOTOR WEIGHT TABLE
POWER
(kW)
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
58
2P
14
14.5
15
15.5
15
16
21
24
33
41
63
70
110
MOTOR WEIGHT (Kg)
4P
6P
13.5
14
14
14.5
14.5
16
15
17
16
22
21
24
23
32
33
41
35
63
41
72
65
81
76
118
118
145
8P
16
17
24
28
30
32
40
64
78
105
115
145
160
LOW NOISE CENTRIFUGAL CABINET FANS
ICC Range
APPLICATIONS
Inlinesupply/exhaust,smokeremoval
PERFORMANCE RANGE
StaticPressureRange:upto1,600Pa
PRODUCT FEATURE
• Both forward and backward centrifugal wheels:
application-oriented
• AirinletspaceconformtoAMCArecommendedsize:
turbulence reduced
• Air-tight casing structure, low noise design, high
efficiency
• Certifiedforsmokeremoval
• Flexible solutions for individual customer needs various outlet directions available; double-speed
motor available; floor-mounted, over-hanging
installation
Common features for DWDI (Double Width
Double Inlet) centrifugal fan inside ICC:
• Mold fabricated venturi inlets make sure the one • High quality fabrication method of the DWDI fan
housing
piece outline are smooth; which assures stable
- All scroll fan housing
performance
are “Pittsburgh” method
• WheeldesignisbasedonadvancedGermanaerojoined, and the 2 pieces
dynamic technology, and optimized via the most upof housing side panels
to-dateCADhydro-fieldsimulatingsoftware
are joined at the same
• Thebladesarefabricatedwithadvancedtechnology,
o ne t im e p r o c e dure,
assuring the mass and stress are are evenly
which results in almost
distributed, which is suitable for long-term function
“Pittsburgh” method joint panels
zero air leakage
• TheDWDIfaninsideICCbearsAMCAsound&air
- The housing are highly
performance seal
stable, rigid for vibration,
• Highqualitypartsselected
and the low sizing tolerance makes sure the aero- Superior
quality
redynamic performance are precisely kept
lubricapable ball bearings
with cast iron pillow block,
lifeexceeds(ABMA)L10:
80,000 hours
- Precisely lathe turned,
ground and heat treated
through soaking furnace
Bearing and shaft
to the hardness level of
HB370
- Power transmission drive featuring advanced taper
bushingdesign,anddrivepowerselectionis120%
of the maximum power under the specified RPM
INFINAIR ICC Range Low Noise Centrifugal Cabinet Fans
59
OPTIONAL CONFIGURATIONS
Motor is positioned on top of the unit away from the air flow
DWDI inside: forward curved type
Reinforcing threaded rod
for forward curved wheel
CONFIGURATION
WHEEL TYPE
USAGE
HOUSING TYPE
HOUSING MATERIAL
60
DWDI inside: backward inclined type
Backward inclined wheel
with reinforcing rod
CLASSIFICATION
Backward inclined wheel
with V-type performance
baffle
DESCRIPTION
Forward curved
Lower noise when normal static pressure required
Backward inclined
Higher static pressure available for same air volume, and nonoverloading
General ventilation
Motor is positioned within airflow; not suitable for smoke removal
Smoke removal
Motor is located on the top of the unit and outside the air stream;
for both smoke removal and general exhaust
Single wall
For general ventilation requirement
Double wall with acoustical insulation
For low noise application
Galvanized steel
Galvanized housing material is more economic
Electrostatic epoxy powder coating
More durable and corrosion resistant
ROOFTOP CENTRIFUGAL EXHAUST FANS
RTC Range
APPLICATIONS
Rooftop exhaust, explosion-proof exhaust, smoke
removal
PERFORMANCE RANGE
VolumeRange:600to50,000CMH
StaticPressureRange:100to1,000Pa
PRODUCT FEATURE
• Active cooling
• “Wind-surferII”designbackwardinclinedcentrifugal
wheel
• Aluminum construction
• Explosive air exhaust for direct drive
• Fan Type - fan is rooftop centrifugal exhaust type, • Structure - the windband have a rigid internal
support structure to protect the fan from heavy wind,
with aluminum backward inclined centrifugal wheel.
the internal structure is water-tight during heavy rain.
The fan wheel Venturi have round curved section to
Motor and drive support panels are anti-corrosion
smoothly transit the air to the wheel cone. The wheel
treated steel panel.
isbalancetestedstaticallyanddynamicallytoG2.5
levelasperISOstandardNo.1940.
matched to the fan load. Motor bearings are ball type
• Fan Housing Material - the fan housing, wheel and
and need no lubrication.
curb cap are made of heavy gauge aluminum alloy.
• Drive (belt drive model only)
operation speed.
- Pulleys: fan pulleys are sized for a minimum of
150% of driven horsepower. The pulleys made of
cast iron type. For easy removal of the pulleys,
conical(QD)typebushingsareutilized.
- Bearings: are selected for a minimum (L-10) life in
speed. Bearing type are permanently sealed, relubricable pillow block metal ball bearings.
heavy gauge powder coated steel, mounted on
The service switch is to be installed inside the fan or on the
vibration isolators. The belt tension are adjusted
roof close to the fan, the usage is to make sure the power
through the motor support plate; fan shaft and
supply can be reliably shut off while repairing the fan, and it
motor shaft is always parallel.
is not supposed to start/stop the fan for daily operation.
INFINAIR RTC Range Rooftop Centrifugal Exhaust Fans
61
Installation Instruction
•
•
•
•
The roof curb height shall be defined by the design
engineer.Suggestedheightshallbe400-600mm
according to local rainfall level.
Isolation pads, steel angles and screws in this
drawing are not supplied by Infinair.
The elasticity of the isolation pads shall remain
good when the fan load is applied, and shall not
become soft even at summer high temperature
situation on the roof.
The rubber isolation pads should be decided
according to the weight of the fan. Typically the
thicknessofthepadis5mm.
Service switch
Conduit of the
fan
Roof curb fabrication
•
•
The contractor is the only party responsible for the
fabrication and procedures to make a roof curb, the
wall shall be different according to the material. The
concrete wall shall be between 70 - 80mm, steel
structureshallbebetween30-45mm.
As to the metal where the fan contact the curb in
the top, a linear rubber vibration isolation pad shall
be applied, also acts as seal. The thickness of the
pad shall be decided according to the fan weight,
and the hardness shall make sure it still maintains
proper elasticity after the fan is seated. The pad
can be cut from typical carpet type isolation pads
and are to be provided by contractors.
How to mount the fan
Pull the fan curb cap on the curb, and fix it at all four
sides by self-tapping screw. The fan must be kept
leveled.
Fix the wire
Deck
Electric wire run
through curb to fan
Wiring Instruction
•
•
•
It is recommended to run the wire indoor below the
roof on electric wiring shelves, and go up through
the internal side of the curb, then penetrate the
conduit of the fan to the motor chamber.
It is prohibited to drill holes on any part of the fan
body for wiring.
The rotation of the wheel must be checked after
the wiring is done, reverse the fan rotation by
interchanginganyof2ofthe3phaselines.
How to mount the back-draft damper
Make sure the damper blades can be fully open to 90
degree when the fan starts, and shut down automatically
by gravity after the fan is stopped.
RTC (belt drive)
62
RTC-D (direct drive)
explosion air exhaust optional
Active cooling: long lasting motor and bearing
MOTOR WEIGHT TABLE
POWER
(kW)
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
2P
14
14.5
15
15.5
15
16
21
24
33
41
63
70
110
MOTOR WEIGHT (Kg.)
4P
6P
13.5
14
14
14.5
14.5
16
15
17
16
22
21
24
23
32
33
41
35
63
41
72
65
81
76
118
118
145
8P
16
17
24
28
30
32
40
64
78
105
115
145
160
63
IN-LINE MIXED-FLOW FANS
IMX Range
APPLICATIONS
Smoke removal; dual speed; large volume supply/
exhaust; underground garage, subway and tunnel
exhaust
PERFORMANCE RANGE
StaticPressureRange:100to2,200Pa
WheelDiameter:300-1,300mm
PRODUCT FEATURE
• Integral with silencer section, large volume, low noise
• Standalone drive chamber structure to protect motor
• Direct drive, few running parts, no maintenance
needed
• Certifiedforsmokeremoval
• Fan Type - the IMX fan uses steel mixed-flow wheel
staticallyanddynamicallybalancedtoG2.5levelas
perISOstandardNo.1940.
• Fan Housing Material - made of steel panel with
rigid internal support structure. The strong windband
support structure protects the fan from wind load;
internal structure is watertight during heavy rain.
• Motor-isIP54withinsulationclassF.Themotoris
readily accessible for maintenance.
• Drive - assemblies supported by heavy gauge
powder coated steel. Fan shaft is precisely turned,
heat treated and balanced. The shaft design speed
exceeds25%ofthemaximumfanoperationspeed.
• Disconnect Switch - is factory installed and wired to
the motor compartment.
INSTALLATION DETAIL
•
•
•
On the ground - fix holes on base of the fan, with
helix or self-tapping screws.
Hoisting - overturn the fan; make the base upstraight; fix the fan on the rooftop.
Upright on the roof - seat the fan on the roof curb,
and fixed by self-tapping screw or expansion screw
fromall4sides.
•
As the part where the fan contact the curb in the
top, a linear rubber vibration isolation pad shall be
applied, also acts as seal. The thickness of the
pad shall be decided according to the fan weight,
and the hardness shall make sure it still maintains
proper elasticity after the fan is seated. The pad
can be cut from typical carpet type isolation pads
and are to be provided by contractors.
Wiring
•
•
•
•
•
It is recommended to run the wire indoor below the
roof on electric wiring shelves.
Whenthefansareusedforsmokeremoval,runthe
wire out of the fan.
When the fans are used for clean air exhaust, let
the wire go up through the internal side of the curb,
then penetrate the conduit of the fan to the motor
chamber.
It is prohibited to drill holes on any part of the fan
body for wiring.
The rotation of the wheel must be checked after
the wiring is done, reverse the fan rotation by
interchangingany2ofthe3wires.
Roof curb fabrication
•
64
The contractor is the only party responsible for the
fabrication and procedures to make a roof curb, the
attached drawing is for reference only. Generally,
concrete wall shall be between 70 - 80mm, steel
structureshallbebetween50mm.
INFINAIR IMX Range In-line Mixed-flow Exhaust / Supply Fans
TECHNICAL DETAILS
Model
D1
D2
D3
n-Ød1
H
L2
2P
4P
6P
8P
A
B
2P
4P
6P
8P
C
D
2P
4P
6P
8P
n-Ød1
IMX 250

















IMX 300

















IMX 350

















IMX 400

















IMX 450

















IMX 500

















IMX 550

















IMX 600

















IMX 650

















IMX 700

















IMX 750

















IMX 800

















IMX 850

















IMX 900














IMX 950


















IMX 1000















IMX 1050















IMX 1100














IMX 1150














IMX 1200














IMX 1250














IMX 1300











65
TECHNICAL DETAILS
Dimension of Shape
Model
66
A
B
C
H
D
2P
4P
Dimension of Roof Curb
6P
8P
H1
L
H2
Opening
Size
IMX 250
330
500
60
282
800
984
400
490
150
440
IMX 300
490
550
60
338
1005
1077
400
540
150
490
IMX 350
650
600
60
394
1210
1170
605
590
150
540
IMX 400
810
650
60
450
1415
1263
628
640
150
590
IMX 450
910
700
60
506
1510
1373
668
690
150
640
IMX 500
1010
750
60
563
1709
1535
752
740
150
690
IMX 550
1100
800
60
619
1650
1600
1410
785
790
150
740
IMX 600
1210
850
80
675
1820
1740
1590
875
840
150
790
IMX 650
1300
900
80
732
1960
1860
1770
940
890
150
840
IMX 700
1400
1000
80
788
2120
2020
1950
1020
990
150
940
IMX 750
1520
1050
80
844
2280
2170
2130
1096
1040
150
990
IMX 800
1620
1150
80
900
2410
2270
2260
1155
1140
150
1090
IMX 850
1720
1200
80
957
2540
2420
2360
1219
1190
150
1140
IMX 900
1820
1250
80
1013
2710
2560
2520
1318
1240
150
1190
IMX 950
1920
1300
80
1070
2820
2580
2540
1424
1290
200
1240
IMX 1000
2020
1400
100
1125
2970
2800
2750
1218
1390
200
1340
IMX 1050
2120
1450
100
1180
3110
2950
2860
1289
1440
200
1390
IMX 1100
2220
1550
100
1237
3050
2990
1338
1540
200
1490
IMX 1150
2330
1600
100
1294
3200
3140
1423
1590
200
1540
IMX 1200
2430
1700
100
1350
3400
3250
1542
1690
200
1640
IMX 1250
2530
1800
100
1406
3600
3440
1638
1790
200
1740
IMX 1300
2630
1900
100
1462
3800
3630
1734
1890
200
1840
SIDEWALL AXIAL EXHAUST/SUPPLY FANS
WEX / WSP Range
APPLICATIONS
Industrialplantsidewallexhaust/supplyfan
PERFORMANCE RANGE
StaticPressureRange:40to300Pa
WheelDiameter:250-550/600-900mm
PRODUCT FEATURE
• Forward sweeping blades; cut into air progressively,
high efficiency, low noise
• Direct connection with square wall opening
• Maintenance-free motor
• Optional weatherhood, insect screen and damper
250-550mm
diameter wheel
600-900mm
diameter wheel
• Fan Type-sidewallaxialflowsupply/exhaustfanwith
forward sweeping steel or aluminum blades, and the
blades strengthened by slots to reduce partial stress.
Under solid support, the vibration speed peak value
islowerthan4.5mm/s,vibrationscopepeaktopeak
value is lower than 0.9x105 mm/RPM. The blades
and motor are statically and dynamically balanced to
G2.5levelasperISOstandardNo.1940.
• Fan Housing Material - is made of galvanized
steel(option:blackepoxypowdercoating)insquare
shape, motor supporting structure is solid to prevent
resonance during operation. A safety mesh is
installed in the indoor side to prevent foreign material
to be sucked into the fan.
• Motor-isIP54withinsulationclassF.Themotoris
located in the airstream for effective cooling.
Black epoxy powder coating option
INFINAIR WEX / WSP Range Sidewall Axial Exhaust / Supply Fans
67
WEX (Exhaust Fan)
WSP (Supply Fan)
TECHNICAL DETAILS
68
Model
Volt
V
Hertz
Hz
Current
A
Motor
W
Power
W
Speed
RPM
Noise
dB(A)
Capacitor
μF
WEX/WSP-250D4
380
50
0.15
60
50
1420
55
-
WEX/WSP-250E4
220
50
0.25
60
50
1350
55
3
WEX/WSP-300D4
380
50
0.20
80
70
1400
58
-
WEX/WSP-300E4
220
50
0.37
80
68
1380
58
3
WEX/WSP-350D4
380
50
0.35
150
115
1380
62
-
WEX/WSP-350E4
220
50
0.70
150
105
1360
62
4
WEX/WSP-400D4
380
50
0.40
180
140
1400
68
-
WEX/WSP-400E4
220
50
0.80
180
130
1400
68
6
WEX/WSP-450D4
380
50
0.52
250
220
1350
70
-
WEX/WSP-450E4
220
50
1.15
250
200
1360
70
8
WEX/WSP-500D4
380
50
0.70
250
220
1350
70
-
WEX/WSP-500E4
220
50
1.75
250
200
1200
69
10
WEX/WSP-550D4
380
50
1.20
550
480
1300
70
10
WEX/WSP-550E4
220
50
2.10
550
494
1180
68
WEX/WSP-600D4
380
50
3.00
1500
1400
1410
<80
WEX/WSP-650D4
380
50
4.50
3000
2450
1380
<81
WEX/WSP-700D6
380
50
2.32
1500
1100
940
<82
WEX/WSP-750D6
380
50
2.80
2200
1500
910
<78
WEX/WSP-800D6
380
50
5.40
2550
2530
940
<79
WEX/WSP-900D6
380
50
6.1
3000
2860
925
<79
INSTALLATION DETAIL
WEX (Exhaust Fan)
wall opening
A
wall opening
Weather Hood
Airstream
Bird Screen
Airstream
A
Steel Beam
Model
Wall Opening Size (mm)
WSP-250D4/E4
340x340
WSP-300D4/E4
390 x 390
WSP-350D4/E4
440x440
WSP-400D4/E4
490x490
WSP-450D4/E4
540x540
WSP-500D4/E4
590x590
WSP-550D4/E4
640x640
WSP-600D4
790 x 790
WSP-650D4
835x835
WSP-700D6
880 x 880
WSP-750D6
945x945
WSP-800D6
1000 x 1000
WSP-900D6
1100 x 1100
Self tapping Screw
Installation Angle
Weather Hood
Concretewallandbrickwall
• A wall opening shall be prepared according to the
“WO” size of the catalog, and calked by foamed
polyester to be watertight.
Pre-fabricated color steel plate wall
• Two horizontal beams and two vertical columns
shall be equipped around the wall opening, and
calked by foamed polyester to be watertight.
According to jobsite situation, traingle support or
threaded hanging rods are also acceptable.
WSP (Supply Fan)
B
Weather Hood
B
Wall
wall opening
Expansion Screw
Installation Angle
Weather Hood
Airstream
Airstream
Insect Screen
Concrete / Brick Wall Detail
69
70
Fan Accessories and Controls
THERMOSTATS
MECHANICAL
DESCRIPTION
T15-WD
The Mf-Net T15-WD mechanical thermostat has a
single-pole switch-contact. When exceeding the set
temperature, the thermostat switches to on or off.
CONTROL DIAGRAM
T15 WD
On
Off
Set point
Temperature
Temperature setting range (°C)
Switch hystereis (°C)
Maximum current (Ohms)
Minimum load (VA)
Switch
Plastic housing (flame retardent)
Protection class
Safety approval; can be supplied with
Weight, packed(kg)
Dimensions of packing box (mm) w
d
h
72
0-40
1.5(±1)K
16A-230V
120VA(2A60V)
1
ABS
IP55
CSA
0.3
100
65
155
Mf-Net Mechanical Thermostats
THERMOSTATS
MECHANICAL
DESCRIPTION
T15-2
The Mf-Net T15-2 mechanical thermostat is a
combination of two single phase mechanical
thermostats, which are separately adjustable. This
enables the determination of the zone width, between
minimum and maximum temperature. The T15-2
mechanical thermostat has two single-pole switch
contacts and is extremely suitable with alarm equipment
formonitoringthetemperature.TheT15-2mechanical
thermostat is a preferred type for use with the MUltIFan
SEAmultifunctionalstepcontroller/transformer,STW-S
semi-automatic step controller/transformer (1-phase)
andSTD-Ssemi-automaticstepcontroller/transformer
(3-phase) or for connecting directly to a fan.
CONTROL DIAGRAM
T15-2
On
Off
Set point min.
Set point max.
Temperature
Minimum load (VA)
Switch
Protection class
Weight, packed(kg)
d
h
0-40(2x)
1
15A-230V
120VA
2
ABS
IP55
CSA
0.5
150
150
110
73
THERMOSTATS
MECHANICAL
DESCRIPTION
T15-4
The Mf-Net T15- 4 is a mechanical multistep
thermostatwithasingle-polecontactand5switching
positions.Ateachriseof1°C,itswitchestothenext
position. The T15-4 mechanical multistep thermostat
can be used with Mf-Net SEA multifunctional step
controller/transformer, STW-A fully automatic step
controller/transformer (1-phase) and STD-A fully
automaticstepcontroller/transformer(3-phase)orwith
controls of other manufacturers.
CONTROL DIAGRAM
Step 5
Step 4
T15-4
Step 3
Step 2
Step 1
Set point
+1
+2
+3
Temperature
Minimum load (VA)
Switch
Protection class
Weight, packed (kg)
d
h
74
0-50
1
10A-250V
120VA
1
ABS
IP55
CSA
0.6
150
150
110
SPEED CONTROLLER
EW SERIES
DESCRIPTION
EW 3.15 / 6.3
The Mf-Net EW 3.15 and EW 6.3 are electronic manual
fan motor speed controllers for continuously variable
speed control. For the EW 6.3 the maximum output
current 6.3 amps.
Features
•Manualspeedcontrolforcontinuouslyvariablespeed
controller of single-phase fans
CONTROL DIAGRAM
Ventilation Output (%)
100
0
Min.
Max.
Manual Control
MIN.
Controller type
Fuse F1 (fan output)
Mains supply (A)
Mains frequency (Hz)
Fan output voltage (V)
Fan output current (A)
Housing
Weight, unpacked (kg.)
207
50
80
0
4or6.3
230
MAX
253
60
Vin-5
3.15or6.3
COMMENTS
Manual triac
FC,size5x20mm
Single phase
IP55plastic
0.5
120x130x90or
120x130x110
Dimensions, W x H x D (mm)
Operating temperature (°C)
Storage temperature (°C)
Ambient relative humidity (%)
TYPICAL
0
-15
Mf-Net EW Series Electronic Variable Manual Speed Controllers
40
50
95
75
REGULATOR
HUMIDITY REGULATOR
DESCRIPTION
Humidcon-s
The Mf-Net Humidcon-s can regulate the humidity in
an area by activating a spray system and ventilators.
The ‘on’ and cycle time of the valves in the spray system
can be set accurately using the programmable timer.
If no humidity sensor is connected, the ventilators
contain to run and the valves in the spray system are
activated continuously, in accordance with the preset
‘on’ and cycle time.
If a humidity sensor has been fitted, the relative
humiditycanbereadoffandset.Whenthereadingis
too low, the Humidcon-s regulates the relative humidity
by activating the spray valves in cycles, in accordance
with the preset value. If the humidity climbs above the
set value, the spray valves are disactivated and the
ventilator continues to run for one hour.
Characteristics
•Simplehumidityregulationthankstoprogrammable
timer fro spray activation
•Whenusedwithhumiditysensor:automatic
humidity control on the basis of preset values
(relative humidity (RH), ‘on’ and cycle time
•Ventilator(forrecirculation)isactivated
automatically
INPUTS
Humidity sensor
76
SETTINGS
Relative humidity set value (RH)
Cycletimeforspray
Mf-Net Humidcon-s Humidity Regulator
OUTPUTS
Ventilatoron/off
Sprayvalveson/off
OPERATING DIAGRAM
Ventilator motor
Spray valves
Valve
open
30 sec.
t-open
Switch on Humidcon-s
Spray valves
Time
Valve
closed
Time
t-cycle
Hysteresis set at 2%
Valve cycle on / off
Relative humidity
Valve closed
Setting point
Supply voltage (V)
Nominal current uptake (VA)
Supply voltage frequency (Hz)
Ventilator motor relay: max. flow (A)
Spray valve relay: max. flow (A)
Spray valve timer:
Cycle time (t-cyclus) in sec.
Valve open - ON time (t-open) in sec.
Setting range relative humidity (%)
Read-out relative humidity (%)
Input signal input humidity sensor (V)
Supply voltage humidity sensor (V)
Housing
Weight, unpacked (kg.)
Dimensions, W x H x D (mm)
Operating temperature (°C)
Storage temperature (°C)
MIN.
104
207
TYPICAL
115
230
50
0.1
0.1
MAX
126
253
10
60
5
1
0
0
5
5
120
120
98
99
0 - 10
24
155
0
-15
COMMENTS
settingrange:
110V/230V
at230V
at230V
DCat20KOhm
DC,max.load200mA
IP54plastic
1.4
240x200x160
40
50
77
MOTOR PROTECTION SWITCHES
MBS SERIES
DESCRIPTION
MS4 / MS6.3
The Mf-Net MBS Series motor protection switches
protect the fan motors against overloads and phase
failures.Thecurrentrangeavailableis0.4-25amps.
Features
•Applicableason/offandlockableoperatingswitch
•Testingpossibility
•Modularsystem
•Extendablewithmax.2auxillarycontacts,6Aeach
•IP55housingavailable(MBSESMGE1)
•VDE-testedandULapproved
CONTROL DIAGRAM
1/L1 3/L2 5/L3
IP55 housing
2/T1 4/T2 6/T3
ITEM CODE
MBSESM4
MBSESM463
78
RATED
CURRENT
(A)
2.5
4
4
6.3
MAX. RATED OPERATING POWER
(kW)
400/415V
500V
690V
1.5
2.2
3
2.2
3
4
Mf-Net MBS Series Motor Protection Switches
OPERATING CURRENT
SHORT CIRCUIT TRIP
(A)
48
75.6
Bathroom Accessories
STANDARD
PREMIUM DRY R ANGE
The Premium range offers a choice of automatic and manual
hand dryers with high standards of safety. Lower working
temperature makes them ideal for use in schools and
nurseries, i.e. for use by
children.
19224 / 19925
FEATURES
•
•
•
•
•
•
•
•
•
Coverwithanti-vandallock.
Easier installation and maintenance.
UVresistantABSplastic.
ElectricallyinsulatedsplashproofIPX4.
NewPrintedCircuitboard.
Dust filter.
Low noise.
Maximum safety.
Complies with EN 60335-2-23/ 1997
standards.
• ApprovedbyIMQ.
NEW
DIMENSIONS (mm.)
Premium Dry A
Automatic Hand Dryer
AUTOMATIC START-UP
Premium
Dry A
Dry

B
C
D
253
253
319
319
220
220
135
135
NEW
NEW
Premium Dry
A
automatic
hand dryer
Premium Dry
Code
19224
19225
Hz
50/60
50/60
220-240
220-240
1,350
1,350
Voltage
Watt
manual
hand dryer
Watt (motor)
45
45
Rated current (A)
5.5
5.5
Air flow (m3h)
120
120
2.3
2.3
IPX4
IPX4
Approvals
Weight (Kg)
Insulation
Protection
IK
Noise Level (at 1m) dB(A)
80
9
9
55.2
55.2
• Fitted with an infra-red sensor which
starts the dryer automatically when
hands enter the sensor detection field:
this can be adjusted using a ”trimmer”
inside the product.
Premium Dry
Manual Hand Dryer
MANUAL START-UP
• Push button protected against improper
and violent use. Air delivery can be
programmed to operate from 20 to 60
seconds.
Supply and Install the Premium Dry or the Premium Dry A, for installation on walls, as
manufactured exclusively by Vortice only for Vortice. For quick installation the unit should
require only 3 screws which allow secure fixing even if wall surfaces are not even.
The Premium Dry A is to be operated by an Infrared sensing device when hands are
placedwithinrangeofthesensor-therangetobeadjustablebetween0and35cmby
adjusting the internal trimmer. The Premium Dry to be manually operated by pressing the
blackbutton.Theairdeliveryshouldbeprogrammabletooperatefrom20to60seconds.
ItshouldbetestedandcertifiedasIPX4(splashproof)withallperformancedatathird
party IMQ (BEAB recognized equivalent) verified. The product should comply with
EN60335-2-23/1997partII“Specialregulationsforhairandskincareappliances”.
Thedryershouldbemanufacturedfromanti-UVABSplastic,withalockablecover(key
provided). The motor should be a thermally protected induction motor with an overheat
safety thermostat and include a thermal cut out device. In addition, the heating element
should automatically cut out when the button or infrared beam system is blocked, either
voluntarilyininvoluntarily,orifthenozzleisblocked.Adustfiltershouldbeintegralto
theunit.Thedryershouldhavea1.35kWheatingelementandairflowdeliveryinfree
airof33.3l/s,thelowerworkingtemperaturemakingtheunitsidealforusebychildren.
A system of flow feeders inside the delivery nozzles should distribute the air evenly.
Thedecibelratingshouldbenomorethan55.2dB(A)at1meter.
VORTICE Premium Dry Range Manual & Automatic Hand Dryers
CLASSICS
OPTIMAL DRY R ANGE
The Optimal Dry range provides automatic and manual hand
dryers with a hard-wearing and attractively designed plastic
casing, which makes them suitable for use in prestigious
buildings. The printed
circuit boards have been
specifically designed and
tested to guarantee long-term
operation.
19229 / 19926
FEATURES
•
•
•
•
•
•
•
•
Easier installation and maintenance.
UVresistantABSplastic.
ElectricallyinsulatedsplashproofIPX4.
NewPrintedCircuitboard.
Dust filter.
Low noise.
Maximum safety.
Complies with EN 60335-2-23/ 1997
standards.
• ApprovedbyIMQ.
NEW
Optimal Dry A
DIMENSIONS (mm.)
Optimal Dry
Automatic Hand Dryer
Manual Hand Dryer
AUTOMATIC START-UP
inside the product.
Optimal
Dry A
Dry

B
C
D
253
253
319
319
220
220
135
135

NEW
NEW
Optima Dry
A
automatic
hand dryer
Optimal Dry
Code
19229
19226
Hz
50/60
50/60
220-240
220-240
Voltage
Watt
manual
hand dryer
2,000
2,000
Watt (motor)
65
65
Rated current (A)
9
9
170
170
2.6
2.6
IPX4
IPX4
Air flow (m3h)
Approvals
Weight (Kg)
Insulation
Protection
IK
9
9
61.4
61.4


MANUAL START-UP
• This is activated by pressing the button,
which is protected against improper and
violent use. The air can be programmed
tooperatefrom20to60seconds.
 Only 3 fixing screws.
 Clip arrangement allows
simple installation and fixing
of the motor assembly within
the back plate.
 The front cover is locked by
a single socket-head screw,
allen-key included.
Supply and Install the Optimal Dry or the Optimal Dry A, for installation on walls, as
manufactured exclusively by Vortice only for Vortice. For quick installation the unit should
require only 3 screws which allow secure fixing even if wall surfaces are not even.
The Optimal Dry A to be operated by an Infrared sensing device when hands are placed
withinrangeofthesensor-therangetobeadjustablebetween0and35cmbyadjusting
the internal trimmer. The Optimal Dry to be manually operated by pressing the black
button.Theairdeliveryshouldbeprogrammabletooperatefrom20to60seconds.
ItshouldbetestedandcertifiedasIPX4(splashproof)withallperformancedatathird
partyIMQ(BEABrecognizedequivalent)verified.Theproductshouldcomplywith
EN60335-2-23/1997partII“Specialregulationsforhairandskincareappliances”.
Thedryershouldbemanufacturedfromanti-UVABSplastic,withalockablecover(key
provided). The motor should be a thermally protected induction motor with an overheat,
safety thermostat and include a thermal cut out device. In addition, the heating element
should automatically cutout when the button or infrared beam system is blocked, either
voluntarilyininvoluntarily,orifthenozzleisblocked.Adustfiltershouldbeintegraltothe
unit.Asystemofflowfeedersinsidethedeliverynozzlesshoulddistributetheairevenly.
Thedryershouldhavea2kWheatingelement,andairflowdeliveryinfreeairof47.2l/s
andadecibelratingofnomorethan61.4dB(A)at1meter.
VORTICE Optimal Dry Range Manual & Automatic Hand Dryers
81
ANTI-VANDAL
METAL DRY R ANGE
Metal Dry range is particularly suitable to high usage.
Installation in public premises such as shopping centers,
motorway services and fast food outlets. The metal outer
casing and air nozzle
guarantees perfect long-term
ef ficiency and aesthetics.
The Metal Dry Range leaves
tradition behind, offering a
design that is both linear and
unique.
FEATURES
• Die- cast aluminum cover with
anti-vandal lock.
• Easy installation and maintenance.
• Nozzlecanbeturned360°.
• ElectricallyinsulatedsplashproofIPX4.
• NewPrintedCircuitboard.
• Maximum safety.
• Scratch-resistant paint.
• Automatic switch-off.
•Rapid dr ying with low power
consumption.
• Appliances manufactured in compliance
withEN60335-2-23/1997.
• ApprovedbyIMQ.
Metal
Dry A
Dry

B
C
D
280
280
355
355
202
202
139
139
Metal Dry A
Metal Dry
automatic
manual
vandal-resistant vandal-resistant
hand dryer
hand dryer
Code
19220
Hz
50/60
50/60
220-240
220-240
Voltage
Watt
19221
1,950
1,950
Watt (motor)
140
140
Rated current (A)
8.5
8.5
Air flow (m3h)
190
190
6.9
7.0
IPX4
IPX4
Approvals
Weight (Kg)
Insulation
Protection
IK
82
Metal Dry A
10
10
69.8
69.8
Metal Dry
Automatic Vandal-resistant Hand Dryer
AUTOMATIC START-UP
inside the product.
DIMENSIONS (mm.)
19220 / 19921

Manual Vandal-resistant Hand Dryer
MANUAL START-UP
• This is activated by pressing the button,
which is protected against improper
and violent use. Air delivery can be
programmed to operate from 20 to 60
seconds.


Thanks to their solid aluminium frame and anti-graffiti paint, they are vandal-proof.
 The manual version (Metal Dry) can be started by pressing the button. The hot air flow can be
adjusted within a range of 20 to 60 seconds by means of an internal setting.
 The automatic version (Metal Dry Automatic) has an infrared device that starts the hand-dryer
automatically every time the hands of the user come within the operating range of the sensors.
 Nozzle can be turned 360°.
The Vortice Metal Dry Automatic/Manual Hand Dryer is constructed with a solid steel
frame, and die cast aluminium front cover painted in anti-graffiti paint, making it an
extremely robust unit suitable for public areas. In addition the unit has a vandal resistant
bolted lock. The unit incorporates a motor with ball bearings and thermal cut-out, and
isIPX4rated.Themanualversionisstartedbypressingthebutton,andthehotairflow
canbeadjustedwithinarangeof20to60seconds.Theautomaticunitincorporatesan
infrared sensor, which activates the unit when hands are brought to within the operating
range of the sensors.
VORTICE Metal Dry Range Manual & Automatic Vandal-resistant Hand Dryers

Indola International Product Binder

Transcription

Similar documents

case study - Adknowledge

High Pressure Misting Fans

London Drugs Case Study

Shocking Facebook Data for Fun and Profit

huntera4cons - Ceiling Fans

Untitled - VTS Group

COMMERCIAL BOOTHS

TLT-Babcock - Siemens PLM Software

TLT-Babcock - Rulestream Case Study