Loaders

COMPACT UTILITY TRACTOR
IMPLEMENTS & ACCESSORIES
<?D:?JDEM
Loader Specifications
pg. 4
Loaders
pg. 5
Loader Buckets
pg. 5
Loader Attachments
pg. 6
Rotary Tillers
pg. 7
Mid-Mount Mowers
pg. 8
Material collection Systems
pg. 8
Rotary Mowers/Slashers
pg. 9
Mowing Accessories
pg. 9
Backhoes
pg. 10
Box Blades
pg. 10
Rotary Brooms
pg. 10
Landscape Rakes
pg. 11
Post Hole Digger
pg. 11
Rear Grader Blades
pg. 11
Single Tyne Rippers
pg. 11
F_YakfWdZ]e
We have a wide range of attachments for your Compact Utility Tractor that are ready and waiting for you to give them a spin. From backhoes to
mowers and every task in between, John Deere commercial-grade attachments not only do it all, they do it better and sooner. The time between
starting up your tractor and getting work done is considerably shorter, thanks to unique attaching systems such as John Deere iMatch™ for
rear attachments, Quick-Park™ loaders and drive-over OnRamp™ and AutoConnect™ decks. This means you’ll be able to spend your time
and energy getting the job done, instead of getting ready to do the job.
To find out which implements are compatible with your tractor, look in the charts throughout these pages. You’ll find your tractor model number
in the left-hand column and your implement model number in the right-hand column. Also, all horsepower requirements are PTO.
TBA
iMatch™
Quik-Park™ Loaders
AutoConnect™ Mower Deck
BE7:;HI
BeWZkfj^[djWa[WbeWZe\\
Is your workload piling up? Take a load off your mind and your to-do list with these high-performance
Quik-Park™ Loaders. Superior breakout forces, fast cycle times and efficient installation and
&9
N
*&
Lift capacity to 59 in.
at pivot pin
321 kg
(708 lb.)
468 kg
(1031 lb.)
468 kg
(1031 lb.)
771 kg
(1700 lb.)
964 kg
(2125 lb.)
959 kg
(2109 lb.)
1240 kg
(2734 lb.)
1194 kg
(2627 lb.)
Lift capacity to
59 in. at 500 mm ahead
234 kg
(516 lb.)
344 kg
(758 lb.)
344 kg
(758 lb.)
595 kg
(1132 lb.)
748 kg
(1649 lb.)
745 kg
(1639 lb.)
981 kg
(2181 lb.)
1171 kg
(2576 lb.)
Lift and reach:
Consider how high and far you need a
loader to reach. Do you need to load a
truck, for instance?
Max lift height at pivot pin
1865 mm
(73.4 in.)
2000 mm
(78.7 in.)
2000 mm
(78.7 in.)
2284 mm
(90 in.)
2593 mm
(102 in.)
2616 mm
(103.3 in.)
2864 mm
(112.8 in.)
2817 mm
(110.9 in.)
Reach at max height
826 mm
(32.5 in.)
744 mm
(29.2 in.)
744 mm
(29.2in.)
773 mm
(30.4 in.)
562 mm
(22.1 in.)
766mm
(30.1 lbf)
628 mm
(24.7 in.)
699 mm
(24.8 in.)
Breakout force:
The higher the breakout force, the
easier it is to fill the bucket.
Breakout force at pivot pin
686kg
(1513 lb.)
969kg
(2137 lb.)
969kg
(2137 lb.)
1295kg
(2855 lb.)
1509kg
(3327 lb.)
1710kg
(3769 lb.)
1590kg
(3506 lb.)
1593kg
(3512 lb.)
Fast cycle times:
Loaders do repetitive tasks, and
saving a second or two each cycle
can really add up. Besides fast raising,
lowering and dump times, steep dump
and rollback angles also contribute to
faster cycle times.
Dump angle
38 deg
38 deg
38 deg
43 deg
44.1 deg
49.3 deg
46 deg
45 deg
Rollback angle
31 deg
25 deg
25 deg
25 deg
31 deg
23.8 deg
31 deg
41 deg
Loader raising/ lowering time
5.56/3.39 sec
4.73/2.88 sec
3.19/1.95 sec
2.76/1.69 sec
3.56/2.1 sec
3.6/2.1 sec
3.68/2.48 sec 3.67/2.47 sec
Bucket dump time/regen
5.56/2.17 sec
4.73/1.85 sec
3.19/1.25 sec
2.91/1.17 sec
2.96/1.24 sec 3.0/1.2 sec
2.44/1 sec
1.6/.90 sec
Bucket rollback time
3.39 sec
2.88 sec
1.95 sec
1.72 sec
1.75 sec
1.44 sec
1.1 sec
1.8 sec
)n
(&
*n
i%
*&
i%
997 kg
(2194 lb.)
1063 kg
(2339 lb.)
(&
*n
1074 kg
(2368 lb.)
790 kg
(1742 lb.)
*'
633 kg
(1393 lb.)
457 kg
(1005 lb.)
(&
725 kg
(1598 lb.)
509 kg
(1122 lb.)
*
&+
%)
&&
&n
9N
&9
N
i%
)&
617 kg
(1360 lb.)
453 kg
(999 lb.)
)n
(&
i%
)&
&N
9N
363 kg
(800 lb.)
253 kg
(557 lb.)
Lift capacity at
pivot pin (max. ht.)
(+
(&
%(
&&
N#
9N
N#
&&
%(
363 kg
(800 lb.)
253 kg
(557 lb.)
Lift capacities, pivot pin vs.
500 mm ahead:
The lift capacity at pivot pin is a gross
measure of loader lifting ability. The lift
capacity 500 mm ahead of pivot point
is often the better measure of working
lift capacity.
()
Lift capacity at
500mm ahead of pivot pin
255 kg
(562 lb.)
179 kg
(395 lb.)
()
&+
%(
M>7JJEBEEA<EH?D7BE7:;H
(&
&&
N#
9N
removal means you’re moving on.
BeWZ[hi
Meet your match. We’ve paired up the John Deere Quik-Park Loaders fast cycle times to impressive lift
capacities for total superior loading performance, unparalleled efficiency. Not only will you save time
loading but you’ll save time putting them on and taking them off—a mere three minutes, or less.
2305, 2320, 2520, 2720
Non-Quik-Park
200X Loader
2305, 2320, 2520, 2720
Quik-Park
200CX Loader
3120. 3320, 3520, 3720
Quik-Park
300X Loader
3120. 3320, 3520, 3720, 4105
Quik-Park
300CX Loader
4120, 4320, 4520, 4720
Quik-Park
400X Loader
4120, 4320, 4520, 4720
Quik-Park, Self Levelling
400CX Loader
Materials Buckets
Load dirt, gravel and feed. Round-back bucket design provides superior material filling and dumping.
200X, 200CX
1250mm (49-in.) wide
JD Carrier
BW14144
200X, 200CX, 300, 300X
1350mm (53-in.) wide
JD Carrier
BW14145
200X, 200CX, 300, 300X, 300CX, 400X, 400CX 1550mm (61-in.) wide
JD Carrier
BW14146
300, 300X, 300CX, 400X, 400CX
JD Carrier
BW14147
1850mm (73-in.) wide
Heavy-duty Buckets
Designed for heavier applications, this bucket features additional wear bars, bucket end plate supports
and pre-drilled holes for replacing the cutting edges.
300, 300X, 300CX, 400X, 400CX
1550mm (61-in.) wide
JD Carrier
BW14764
400X, 400CX
1850mm (73-in.) wide
JD Carrier
BW14765
400X, 400CX
1830mm (72-in.) wide
Skid Steer Carrier
LVB25342
High-volume Buckets
The perfect match for moving a large capacity of light material such as snow, sawdust, mulch and feed.
300CX, 400X, 400CX
1850mm (73-in.) wide
JD Carrier
BW14658
300CX, 400X, 400CX
2150mm (85-in.) wide
JD Carrier
BW15273
400X, 400CX
2135mm (84-in.) wide
Skid Steer Carrier
LVB25345
Tooth Bars
Easily penetrate hard-packed material. Slide tooth bar over cutting edge to attach.
Heavy-duty bucket
1550mm (61-in.) wide
JD Carrier
BW15227
Heavy-duty bucket
1850mm (73-in.) wide
JD Carrier
BW15228
Construction bucket
1680mm (66-in.) wide
Skid Steer Carrier
KV12294
Construction bucket
1830mm (72-in.) wide
Skid Steer Carrier
KV11598
4-in-1 Buckets From Fieldquip
Multi-tasker. Easily load, scrape, blade and even clamp material with this do-it-all bucket. Center opens
for clamping action.
300CX, 400X, 400CX Loaders
1525mm (60-in.) wide FIELDQUIP
FB1500
300CX, 400X, 400CX Loaders
1830mm (72-in.) wide FIELDQUIP
FB1800
+
Skid Steer Loader Attachment Carrier
Use your skid steer loader attachments on your John Deere Tractor with this convenient attaching
device.
300CX, 400X, 400CX
Skid Steer Carrier
BW15244
Hood Guard
Protect your grill from brush, debris and those unexpected “bumps” that happen when getting too
close while dumping your load.
2305, 2320
Open units
Hood guard
BW15217
2520, 2720
Open units
Hood guard
BW15634
3120, 3320, 3520 3720
Open and cab units
Hood guard
BW15219
4120, 4320, 4520, 4720
Open and cab units
Hood guard
BW15221
4105
Open units
Hood guard
BW15783
Deluxe Hood Guard
Enjoy increased protection to the front and side of your grill. The hood guard’s wrap-around design
combined with mesh front provides superior protection from debris and brush.
3120, 3320, 3520, 3720
Open and cab units
Deluxe hood guard
BWA1190
4120, 4320, 4520, 4720
Open and cab units
Deluxe hood guard
BWA1184
Rear Wheel Weight
Properly ballast your tractor while providing superior traction for jobs on slippery terrain, a plus
when doing loader work.
2305
Open units
Rear wheel weight 25kg (55 lb.) BM17972
3120, 3320, 3520, 3720, 4120,4320, 4520, 4720
Open and cab units
Rear wheel weight 50kg (110 lb.) BM17968
3120, 3320, 3520, 3720, 4005, 4120, 4320, 4520, 4720, 4105
Open and cab units
Rear wheel weight 50kg (110 lb.) T19293
Ballast Box
Enhance loader performance in all conditions with correct ballasting. Order a ballast box extension
to add even more ballasting to the rear.
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720, 4105, 4120, 4320, 4520, 4720
Ballast box for tractor
BW15073
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720, 4105, 4120, 4320, 4520, 4720
Ballast box extension for tractor
BW15074
iMatch Bushing Kit
Lets you use a ballast box while keeping your iMatch hitch on.
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720, 4120, 4320, 4520, 4720
iMatch bushing kit for ballast box
BW15056
3rd Function Hydraulic Line Kit
Provide hydraulic power to loader attachments that have increased versatility such as a 4-in-1
Bucket
300CX
3rd function hydraulic line kit
BW15630
400X, 400CX
3rd function hydraulic line kit
BW15260
EH 3rd SCV Kits
Lets the operator control the hydraulic flow from the joystick to the attachment such as a grapple
using the push of a button.
,
3120, 3320, 3520, 3720
Open
EH 3rd SCV Kits
LVB25507
3320, 3520, 3720
Cab
EH 3rd SCV Kits
LVB24854
4120, 4320, 4520, 4720
Open
EH 3rd SCV Kits
LVB25511
4320, 4520, 4720
Cab
EH 3rd SCV Kits
LVB24855
J?BB;HI
=h[WjXh[Waj^hek]^i
Turning the soil shouldn’t turn into a lot of work. That’s why these aggressive tillers are specifically
designed to breakthrough the toughest terrain.
Rotary Tillers
Take on tall tilling tasks with these commercial-duty models. Large, replaceable tines and a heavyduty
tubular tine shaft provide excellent performance and durability when biting into dried-out, packed down
soil conditions.
2320, 2520, 2305, 2720
1.2m (48-in.) tilling width
647 Tiller
2320, 2520, 3120, 3320, 3520, 4105
1.4m (55-in.) tilling width
655 Tiller
3120, 3320, 3520, 3720, 4105, 4120, 4320, 4520, 4720
1.65m (65-in.) tilling width
665 Tiller
4120, 4320, 4520, 4720
1.85m (73-in.) tilling width
673 Tiller
4120, 4320, 4520, 4720
2.0m (81-in.) tilling width
681 Tiller
-
HEJ7HOC?:#CEKDJ
CEM;HI"C7J;H?7B
9EBB;9J?ED
IOIJ;CI7D:
=HEEC?D=CEM;HI
9kjZemdoekhcem_d]j_c[
Quality cuts. Reduce your mowing time without sacrificing your finish. From tow-behind mowers to
mid-mounts, these units make quick work with professional results in large areas.
Mid-Mount Mowers
Enjoy the highest cut quality and more maneuverability in smaller areas. For effortless installation and
removal, try the driveover OnRamp™ mowers. Or the 7-Iron™ mowers if you need higher durability
with your high-quality cut.
2305
1.35m (54-in.) cutting width
54C
2305
1.55m (62-in.) cutting width
62C
2320
1.35m (54-in.) cutting width
54D OnRamp™
2320, 2520, 2720
1.55m (62-in.) cutting width
62D OnRamp™
2520, 2720
1.8m (72-in.) cutting width
72-in., mid-mount
3120, 3320, 3520, 3720
1.5m (60-in.) cutting width
60-in. 7-Iron
3120, 3320, 3520, 3720, 4120, 4320, 4520, 4720
1.55m (62-in.) cutting width
72-in. 7-Iron
Independent Lift Kit (deck and 3-point independent)
Independent lift kit allows the deck to lift independent to the 3-point hitch, allowing you to keep mower
decks on when using rear-mounted implements.
2305, 2320
LVB25630
2520, 2720
LVB25605
3120, 3320, 3520, 3720
1.5m (60-in.) cutting width
60D AutoConnect™
3120, 3320, 3520, 3720
1.8m (72-in.) cutting width
72D AutoConnect™
Material Collection Systems
Collect and carry on while leaving a flawless finish. Choose from a manual dump or a hydraulic dump
model for no leaving the seat when emptying.
2305, 2320, 2520, 2720
.
14-bushel capacity
3-Bag Power Flow MCS
3rd SCV Hydraulics
Expand the functionality of your tractor. Whether you’re trying to control your rear hydraulic implement
or lift and lower mid mowers, this kit can make it happen.
2320, 2520, 2720
Open units
3rd SCV Hydraulics kit
LVB24871
3120, 3320, 3520, 3720
Open units
3rd SCV Hydraulics kit
LVB25506
3320, 3520, 3720
Cab units
3rd SCV Hydraulics kit
LVB24845
4120, 4320, 4520, 4720
Open units
3rd SCV Hydraulics kit
LVB25513
4320, 4520, 4720
Cab units
3rd SCV Hydraulics kit
LVB24848
Mid PTO and Mid PTO Controls
Properly equip your tractor to operate your midmount mower or 3000 Twenty Series front implements.
3120, 3320, 3520, 3720
Open and cab units
Mid PTO
LVB25537
3320, 3520, 3720
Cab units
Mid PTO Controls
LVB24846
4120, 4320, 4520, 4720
Open and cab units
Mid PTO
LVB25564
4320, 4520, 4720
Cab units
Mid PTO Controls
LVB24847
Mid Mower-Loader Diverter (KIT)
No more switching hoses back and forth, this kit provides another mid SCV coupler. The operator simply
moves a lever and diverts the hydraulic fluid to the implement that they choose to use. A real convenience
when switching from mower to loader work.
2305, 2320
LVB25822
2520, 2720
LVB25823
Quik-Tatch Weights
Ballast is made easy with these individual weights. Molded-in handles makes installation and removal
a cinch.
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720, 4105, 4120, 4320, 4520, 4720
Open and cab units
19kg (42-lb.) Quik-Tatch, front weight
R66949
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720, 4105, 4120, 4320, 4520, 4720
Open and cab units
32kg (70-lb.) Quik-Tatch, front weight
BM19780
Front Quik-Tatch Weights Kit
Properly ballast your tractor to get the most efficiency out of your implements. Attach this pin and rod to
hold weights.
3120, 3320, 3520 3720,4105
Open and cab units
Holds 5 Quik-Tatch Weights
LVBM19607
4120, 4320, 4520, 4720
Open and cab units
Holds 6 Quik-Tatch Weights
LVB25705
Front Weight Bracket Extension
Hold even more weights than your standard Quik-Tatch kit with this extension.
2305, 2320, 2520, 2720
Open units
Holds 7 Quik-Tatch Weights
LVB25363
3120, 3320, 3520, 3720, 4105
Open and cab units
Holds 12 Quik-Tatch Weights
LVBM19581
4120, 4320, 4520, 4720
Open and cab units
Holds 12 Quik-Tatch Weights
LVBM19596
ROPS Brush Guard
Protect the lights on your ROPS from getting knocked off or scratched with these convenient guards.
2305, 2320, 2520, 2720, 3120, 3320, 3520, 3720
Open units
Warning light brush guard kit
LVB25016
4120, 4320, 4520, 4720
Open units
Warning light brush guard kit
LVB25236
Rotary Mowers/Slashers by Fieldquip
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.2m (48-in.) cutting width, 2 blade
18 - 40 hp
Sabre 1200
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.5m (60-in.) cutting width, 2 blade
18 - 40 hp
Sabre 1500
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.5m (60-in.) cutting width, 2 blade
18 - 40 hp
Sabre 1550
3520, 3720, 4120, 4320, 4520, 4720
1.5m (60-in.) cutting width, 2 blade
30 - 75 hp
LS-60
3520, 3720, 4120, 4320, 4520, 4720
1.8m (72-in.) cutting width, 2 blade
30 - 75 hp
LS-70
3520, 3720, 4120, 4320, 4520, 4720
1.5m (60-in.) cutting width, 2 blade
30 - 100 hp
MX-60
3520, 3720, 4120, 4320, 4520, 4720
1.8m (72-in.) cutting width, 2 blade
30 - 100 hp
MX-70
3520, 3720, 4120, 4320, 4520, 4720
2.0m (81-in.) cutting width, 2 blade
30 - 100 hp
MX-80
/
879A>E;I"
8EN8B7:;I"
FEIJ>EB;:?==;H
;d^WdY[oekhXekdZWh_[i
Whether you need to go below ground or enhance the surface above, there’s a specialized tool to help
you put your stamp on your land. So the only thing that’s really stopping you is your imagination.
Backhoes
Powerful digging and backfilling action along with excellent visibility to the trench makes quick
work in tough conditions. A full 180-degree rotation on most models lets you work in tight quarters.
Unique RockShaft Assist (RSA) mounting system lets one person attach unit to tractor in less than five
minutes.
2320, 2520, 2720
1.98m (6-ft. 6-in.) digging depth
46 Backhoe
3120, 3320, 3520, 3720, 4105
2.34m (7-ft. 8-in.) digging depth
375 Backhoe
2.67m (8-ft. 9-in.) digging depth
485 Backhoe
2.67m (8-ft. 9-in.) digging depth
485 Backhoe
open stations and cab
3120, 3320, 3520, 3720
(open stations only)
4120, 4320, 4520, 4720
open stations and cab
Rotary Brooms
Quickly make a clean sweep of leaves, grass or snow-covered sidewalks.
2305, 2320, 2520, 2720
1.3m (52-in.) width
Front Quik-Tatch hitch
52 Broom
2305, 2320, 2520, 2720
1.5m (60-in.) width
Front Quik-Tatch hitch
60HD Broom
3120, 3320, 3520, 3720
1.5m (60-in.) width
Front 3-point hitch
60HD Broom
Top and Tilt
Effortlessly change the angles of your implements with this convenient kit. A real plus when box blading.
3120, 3320, 3520, 3720
Open and cab units
Top and tilt
LVB25311
4120, 4320, 4520, 4720
Open and cab units
Top and tilt
LVB25312
4105, 3320, 3520, 3720
1.2m (48-in.) blade
25 - 35 hp
BB 1200
4105, 2520, 2720, 3320, 3520, 3720
1.5m (60-in.) blade
20 - 40 hp
BB 1500
4105, 3320, 3520, 3720
1.8m (72-in.) blade
25 - 50 hp
BB 1800
Box Blades by Fieldquip
'&
Hydraulics, Power Beyond
Get power to the rear of your tractor in order to operate attachments that contain a control valve such
as a backhoe.
2305
Open units Power beyond
LVB24981
2320, 2520, 2720
Open units Power beyond
LVB25603
3120, 3320, 3520, 3720, 4105
Open units Power beyond
LVB25505
3120, 3320, 3520, 3720,
Cab units Power beyond
LVB25781
4120, 4320, 4520, 4720
Open units Power beyond
LVB25512
4120, 4320, 4520, 4750
Cab units Power beyond
LVB25780
Hydraulic Diverter
Divert power to the rear of your tractor with this convenient toggle switch. Engage to hydraulically operate
rear implements with your loader joystick. Disengage to transfer power back to front implements.
3120, 3320, 3520, 3720
Open units
Hydraulics diverter
LVB25507
3320, 3520, 3720
Cab units
Hydraulics diverter
LVB24854
4120, 4320, 4520, 4720
Open units
Hydraulics diverter
LVB25511
4320, 4520, 4720
Cab units
Hydraulics diverter
LVB24855
Hydraulic Rear Coupler
Quickly and effortlessly remove your hydraulic hook-ups with these couplers.
2320, 2520, 2720
Open units
Hydraulic rear couplers
Front Hitches
Make changes as easily as you change your mind. Simply drive in, pick up attachments, secure with pins
and hydraulics and you’re done.
2305
Open units
Front Quik-Tatch hitch
2320, 2520, 2720
Open units
Front Quik-Tatch hitch
BM20921
LVB24898
3120, 3320, 3520, 3720
Open and cab units
Front 3-pt. hitch with A-frame
LVB24815
Post Hole Digger by Fieldquip
2305, 4105, 2320, 2520, 2720, 3320, 3520
Choice of Double Cut Augers from 100mm (4-in.) to 610mm (24-in.)
18 - 30 hp
L20
4105, 3320, 3520, 3720, 4120, 4320, 4520, 4720
Choice of Double Cut Augers from 100mm (4-in.) to 610mm (24-in.)
25 - 55 hp
L50
4105, 3520, 3720, 4120, 4320, 4520, 4720
Choice of Double Cut Augers from 100mm (4-in.) to 610mm (24-in.)
30 - 75 hp
L75
Rear Grader Blades by Fieldquip
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.2m (48-in.) blade
18 - 40 hp
LGB 1200
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.5m (60-in.) blade
18 - 40 hp
LGB 1500
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.8m (72-in.) blade
18 - 40 hp
LGB 1800
2305, 4105, 2320, 2520, 2720, 3320, 3520
1.2m (48-in.) rake
15 - 30 hp
FLR-4
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.5m (60-in.) rake
15 - 40 hp
FLR-5
2305, 4105, 2320, 2520, 2720, 3320, 3520, 3720, 4120, 4320
1.8m (72-in.) rake
15 - 40 hp
FLR-6
Landscape Rakes by Fieldquip
Single Tine Rippers by Fieldquip
TBC
100 x 25 main billet
STR 100
TBC
150 x 32 main billet
STR 150
/
www.JohnDeere.com.au
Engine hp in this brochure is provided by engine mfr. for comparison purposes. Actual operating hp will be less.This literature has been compiled for worldwide circulation. While general information, pictures and
descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS.
John Deere reserves the right to change specification, design and price of the products described in this literature without notice. John Deere’s green and yellow color scheme, the leaping deer symbol, and
JOHN DEERE are trademarks of Deere & Company.
CP6193