HSBM 610 HS and 1020-10 - Manual swivel bending machines for

HSBM 610 HS and 1020-10 - Manual swivel bending machines for

Belt
Bending
saws
HSBM 610 HS and 1020-10 - Manual swivel bending machines for
standard bending tasks
· Perfect to produce all profiles up to
boxes canted all around
· Cost-efficient beginner model for
craftsmen
· Easy design and stable construction guarantee
exact working
· Safe clamping of the steel sheet by means of
a special clamping device
HSBM 610 HS:
· Rapid, user-friendly setting
of the upper beam via eccentric
· Swivel bending of the bending tub
via bow-type handle
· With high upper beam for high
canted U profiles
· With 5-fold segmented upper beam
25/50/75/205/255 mm
· Easy to transport
HSBM 1020-10 HS:
· Easy setting of the upper beam
· Swivel bending of the bending tub
via double handle
· Safe clamping of the steel sheet by means of
a special clamping device
Ideal for working
when you are away on a
construction job
· The setting of the upper
beam to different steel sheet
thickness is performed easily
and rapidly
Type
Item No: € plus VAT
HSBM 610 HS
377 2610
299.00
HSBM 1020-10
377 1020
899.00
Technical data
Working width max.
Steel sheet thickness max.
Bending angle max.
Weight
Dimensions [LxWxH]
610 mm
1.0 mm
135 °
42 kg
850 x 360 x 420 mm 1020 mm
1.0 mm
135 °
105 kg
1276 x 550 x 975 mm
Built according to CE directives
Option
Hardened segments HSBM 1020-10*
Item No
377 2700
€ plus VAT
139.00
*only the upper beam is hardened
107
Manual swivelling bending machine
New
HSBM 2200 - 0.7 and 3000 - 0.6 - Manual swivel bending machines for
standard bending tasks
· 2 machines in 1: Manual swivelling bending
machine and circular shears
· Ideal for roofers on a job e.g. producing steel
sheets for bays, flashings, chimney claddings or
eaves gutters
· Solid and robust construction
· The detachable roller cutter allows precise
cutting of copper and zinc plates
· Optionally equipped with bead function, for
beading of steel sheets
·Swivel bending function with safe clamping of
the workpiece by special pre-tensioning of the
upper beam
· Angle display
from 0° to 135°
· Roller cutter
including manual lever to cut
off the finshed workpiece
HSBM 2200 - 0.7
· Manual lever
for rapid operation of the
circular shears
Type
Item No: € plus VAT
HSBM 2200 - 0.7
377 9200
1'999.00
HSBM 3000 - 0.6
377 9300
2'999.00
Technical data
Bending length
Steel sheet thickness
Bending angle
Bending beam width
Weight
2200 mm
0,7 mm
145 °
40 mm
120 kg
3000 mm
0,6 mm
145 °
20 mm
400 kg
108
Accessories
Manual bending roll
Heel bend
Beading function 2030 mm
Item No
379 9000
379 9001
379 9002
€ plus VAT
169.00
169.00
599.00
Built according to CE directives
Bending
Magnetic swivel bending machine
New
MBM 1250 - Magnetic swivelling bending machine with foot pedal
· Revolutionary easy, very rapid and
comfortable operation
· compact & space saving
· Perfect for bending of aluminium, copper, steel,
stainless steel, etc.
· Bending angle adjustment up to 170 ° accurate to
the degree
· Powerful electromagnetic system for optimum
bending results
· The clamping over the whole width guarantees a
neat bending
· Segment partitioning in mm:
25 - 40 - 50 - 70 - 140 - 280 - 700 - 1250
· Very high bending capacity
· The main pressure is on the upper beam, not on the
machine
· The unique centerless hinges provide for a precise
power transmission at the bending point
· Rear limit stop, segmented upper beam and foot
pedal are included in the standard scope of delivery
Extremely rapid and easy
operation - with a few steps you
will bend you steel sheets to the
desired shape without big effort
Step 1:
Position the workpiece on the
magnetic conducter and adjust it
by means of the bending edge.
1
Step 2:
Select the matching bending
segment, place it on the
workpiece and activate the
magnet.
2
Slots for
upper beam segments
Including functional
storage places for all
individual segments
and bending rails
Scope of delivery:
· Bending angle stop
· Widening of the bending
member
· Rear stop
· Sharp bending rail
· Narrow sharp bending rail
· Segmented upper beam
· Slitted bending rail
· 7 bending segments
· Foot pedal
Type
Item No: € plus VAT
Technical data
Bending width max.
Fixing pressure
Performance
Dimension
Thermal protection
Weight
Workpiece thickness*
MBM 1250
377 0125
3'289.00
Step 3:
It is possible to set the exact
bending angle at the bending
limit stop. Perform the
bending process.
3
Rear view
7 of numerous other bending options:
The retrofitting for other bending
processes is performed with a few
movements.
1250 mm
6 to.
10 A
1500 x 410 x 390 mm
70 °C
150 kg
Smooth steel/ aluminium,
copper, zinc, brass
mittlerer Härte
Stainless steel
1,6 mm ** /1,2 mm ***
1.0 mm ** /0.9 mm ***
Note: Do not use the machine if you have a pacemaker implanted.
* For workpiece lengths of 1250 mm - for shortest workpieces it might be possible
to use thicker material thicknesses ** with bending beam widening
*** Bending beams widening disassembled
Built according to CE directives
Become fascinated!
Please find more information in our
video presentation on www.metallkraft.de !
109
Hand swivel bending machines
HSBM N - Universally applicable, manual swivel bending machines,
extendable with different add-on kits
· Safe clamping of the workpiece by special
pre-tensioning of the upper beam
· Easy fixing of the set bending angle,
by which a high repeating accuracy
is being guaranteed
· Self-lubricating sleeve bearing
· Built according to CE standard
· The corresponding basic type of the hand
swivel bending machines can be upgraded at any time
using the corresponding add-on kits (AB)
Easily retrofittable to
other bending rails!
HSBM N type
with low upper beam
Basic type
Add-on kit (AB)
Working width Steel sheet thickness Bending angle
Weight
max.
max.*
max.
Dimensions
LxWxH in mm
Item No
€ plus VAT
HSBM 660 N
AB 660 H
AB 660 HS
AB 660 HSG
660 mm
660 mm
660 mm
660 mm
2.00 mm
1.80 mm
1.50 mm
1.50 mm
135°
93°
93°
93°
56 kg
+ 8 kg
+ 10 kg
+ 9 kg
880 x 570/500 x 970
880 x 570/500 x 1060
880 x 570/500 x 1070
880 x 570/500 x 1070
377 0066
377 0067
377 0068
377 0069
829.00
249.00
559.00
619.00
HSBM 1050 N
AB 1050 H
AB 1050 HS
AB 1050 HSG
1050 mm
1050 mm
1050 mm
1050 mm
1.25 mm
1.25 mm
1.20 mm
1.20 mm
135°
93°
93°
93°
78 kg
+ 13 kg
+ 16 kg
+ 15 kg
1250 x 570/500 x 970
1250 x 570/500 x 1060
1250 x 570/500 x 1070
1250 x 570/500 x 1070
377 1050
377 1051
377 1052
377 1053
895.00
319.00
689.00
869.00
HSBM 1300 N
AB 1300 H
AB 1300 HS
AB 1300 HSG
1300 mm
1300 mm
1300 mm
1300 mm
1.20 mm
1.20 mm
1.20 mm
1.20 mm
135°
93°
93°
93°
88 kg
+ 16 kg
+ 20 kg
+ 18 kg
1480 x 570/500 x 970
1480 x 570/500 x 1060
1480 x 570/500 x 1070
1480 x 570/500 x 1070
377 1300
377 1301
377 1302
377 1303
1,259.00
389.00
875.00
1,039.00
*Max. values related to the bending of soft metals, e.g. aluminium
110
€ plus VAT
159.00
229.00
269.00
189.00
279.00
319.00
179.00
209.00
259.00
179.00
209.00
259.00
179.00
209.00
259.00
439.00
459.00
479.00
419.00
509.00
min. 15
min. 95
min. 15
min. 15°
min. 15°-180°
min. 10
min. 95
Type
Description
N
with low upper beam
H
with high upper beam
S
with segment rail
G
with V-tool
Accessories
Item No
Sharp bending rail for HSBM 660 N
379 0096
Sharp bending rail for HSBM 1050 N
379 0101
Sharp bending rail for HSBM 1300 N
379 0102
Sharp bending rail for HSBM 660 H
379 0097
Sharp bending rail for HSBM 1050 H
379 0103
Sharp bending rail for HSBM 1300 H
379 0104
Round bending rail 3.0 mm (width 660)
379 0151
Round bending rail 3.0 mm (width 1050)
379 0152
Round bending rail 3.0 mm (width 1300)
379 0153
Round bending rail 4.0 mm (width 660)
379 0161
Round bending rail 4.0 mm (width 1050)
379 0162
Round bending rail 4.0 mm (width 1300)
379 0163
Round bending rail 5.0 mm (width 660)
379 0171
Round bending rail 5.0 mm (width 1050)
379 0172
Round bending rail 5.0 mm (width 1300)
379 0173
Rear stop for HSBM 660
379 1660
Rear stop for HSBM 1050
379 1050
Rear stop for HSBM 1300
379 1300
Roller cutter for HSBM 1050
379 1051
Roller cutter for HSBM 1300
379 1301
Bending examples:
HSBM ´with low
and high
upper beam
Bending examples
HSBM with high
upper beam, segment
rail or retaining clamp
Bending
Quality
Made in
Europe
Optional sharp bending rail
Optional round bending rail
Basic machine
HSBM N type
Add-on kit H
High upper beam
HSBM with add-on kit
H type
Add-on kit HS
High segmented upper jaw
Add-on kit HSG
High segmented Upper beam with V-tool
HSBM with add-on kit
HS type
HSBM with add-on kit
HSG type
111
Foot swivel bending machines
FSBM - Swivel bending machines with foot-controlled top clamping bar,
universally applicable in the industry and craft
· The material clamping is performed by footcontrol, this way both hands are free for the
material feeding
· Serial with high, inclined, segmented upper
beam (FSBM 1020-20 S2 additionally with
segmented bottom beam)
· The powerful accessory cylinder facilitates
the bending of steel sheets up to 2.5 mm
· Wide opening between upper and
bottom beam up to 25 mm
· Self-lubricating sleeve bearing
FSBM 1020-20 HSG
with V-tools perfect for roofers
FSBM 1270-20 E
With segmented upper
beam as standard
Type
FSBM 1020-25 E
FSBM 1020-20 S2
FSBM 1020-20 HSG***
FSBM 1270-20 E
FSBM 1270-20 S2
FSBM 1520-15 E
New
FSBM 2020-12 E
Working width Steel sheet thicknessBending angle
Weight
max.
max.*
max.
1020 mm
2.5 mm
135°
285 kg
1020 mm
2.0 mm
135°
300 kg
1020 mm
2.0 mm
150°
340 kg
1270 mm
2.0 mm
135°
315 kg
1270 mm
2.0 mm
135°
350 kg
1520 mm
1.5 mm
135°
385 kg
2020 mm
1.2 mm
135°
490 kg
FSBM 1020-20 HSG
With segmented top cheek and
V-tool as standard
Dimensions
LxWxH in mm
1348 x 850 x 1175
1348 x 850 x 1175
1460 x 930 x 1420
1600 x 950 x 1175
1600 x 950 x 1175
1960 x 710 x 1300
2470 x 940 x 1320
Item No
€ plus VAT
377 2125
377 2102
377 0103
377 2127
377 2128
377 2129
377 2130
1'589.00
1,749.00
3,999.00
1,799.00
2,079.00
2,699.00
4,399.00
*Max. Values refers to S235 JR ***Segments have a degree of hardness of HRC24-26
112
Built according to CE directives
Belt
saws
Bending
New
FSBM 1020-20 S2
with segmented
upper and bottom beam
FSBM 2020-12 E
Serial with segmented upper
and bottom beam
FSBM 1020-20 S2
Serial with segmented upper
and bottom beam
TypeSegmentation
1020-20 HSG 25-30-35-40-45-50-75-100-150-200-270
1020-20 E
25-30-35-40-45-50-75-100-150-200-270
1020-20 S2 25-30-35-40-45-50-75-100-150-200-270
1270-20 E
25-30-35-40-45-50-75-100-150-200-250-270
1270-20 S2 25-30-35-40-45-50-75-100-150-200-250-270
1520-15 E
25-30-35-40-45-50-75-100-150-200-250-250-270
2020-12 E
25-30-35-40-45-50-75-100-150-200-250-250-270-500
Built according to CE directives
Option
Hardened segments FSBM 1020-20 S2**
Hardened segments FSBM 1020-25 E**
Hardened segments FSBM 1270-20 E**
Hardened segments FSBM 1270-20 SE**
Hardened segments FSBM 1520-15 E**
Hardened segments FSBM 2020-12 E**
**only the upper beam is hardened
Item No
377 2701
377 2702
377 2703
377 2703
377 2704
377 2705
€ plus VAT
455.00
455.00
520.00
520.00
615.00
760.00
113
Manual swivel bending machines
HSBM - Manual swivel bending machines of heavy type,
developed for the professional use
· Easy operation
· Heavy, compact steel welding construction
· For easy bending with exact setting of the
bending angle
· Very low maintenance
· Serial with manual setting of the
bending angle
· Manual operation of the clamping aprons, this
way rapid and easy handling of the material
which needs to be bent
S types
· With segmented upper beam
H types
· With high upper beam
Fig. HSBM 3020-12 with optional foot pedal
Type
HSBM 1520-25 S / SH
HSBM 2020-20 S / SH
HSBM 2520-16 S / SH
HSBM 3020-16 S / SH
Segmentation HSBM S / HSBM SH
25-30-35-40-45-50-75-100-150-220-250-500
25-30-35-40-45-50-75-100-150-200-200-270-400-400
25-30-35-40-45-50-75-100-150-200-200-270-400-400-500
25-30-35-40-45-50-75-100-150-200-200-270-400-400-500-500
Type
Working widthSteel sheet thicknessOpening betweenMotor power
Weight
max.
max.* upper + bottom beam beam bending
max.*
HSBM 1520-25
1520 mm
2.5 mm
120 mm**
-
-
850 kg
HSBM 2020-20
2020 mm
2.0 mm
120 mm**
-
-
1130 kg
HSBM 2620-16
2620 mm
1.6 mm
120 mm**
-
-
1320 kg
HSBM 3020-12
3020 mm
1.2 mm
120 mm**
-
-
1900 kg
HSBM 1520-25 S
1520 mm
2.5 mm
120 mm**
-
-
850 kg
HSBM 2020-20 S
2020 mm
2.0 mm
120 mm**
-
-
1080 kg
HSBM 2620-16 S
2620 mm
1.6 mm
120 mm**
-
-
1320 kg
HSBM 3020-12 S
3020 mm
1.2 mm
120 mm**
-
-
1900 kg
HSBM 1520-25 SH 1520 mm
2.5 mm
120 mm**
-
-
850 kg
HSBM 2020-20 SH 2020 mm
2.0 mm
120 mm**
-
-
1080 kg
HSBM 2620-16 SH 2620 mm
1.6 mm
120 mm**
-
-
1320 kg
HSBM 3020-12 SH 3020 mm
1.2 mm
120 mm**
-
-
1900 kg
Dimensions
LxWxH in mm
Item No
€ plus VAT
TPFR***
2680 x 570 x 1270
2695 x 560 x 1255
3680 x 570 x 1270
4180 x 570 x 1270
2680 x 570 x 1270
3180 x 570 x 1270
3680 x 570 x 1270
4180 x 570 x 1270
2680 x 570 x 1270
3180 x 570 x 1270
3680 x 570 x 1270
4180 x 570 x 1270
377 9001
377 9002
377 9003
377 9004
377 9010
377 9011
377 9012
377 9013
377 9020
377 9021
377 9022
377 9023
5,439.00
6,189.00
6,759.00
7,999.00
5,699.00
6,559.00
7,259.00
8,429.00
6,799.00
7,479.00
8,459.00
9,379.00
= 100.00 €
5
5 = 100.00 €
5 = 100.00 €
6 = 200.00 €
5 = 100.00 €
5 = 100.00 €
5 = 100.00 €
6 = 200.00 €
5 = 100.00 €
5 = 100.00 €
5 = 100.00 €
6 = 200.00 €
* Indications referring to steel sheets with a tensile strength of 400 N/qmm
** With optional foot padal with the opening in order to reduce 60 mm
***Transportation packaging flat rate: For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT.
114
Built according to CE directives
Belt
saws
Bending
Quality
Made in
Europe
Other swivel bending machines
available upon request!
· Easy, manual setting of the
bending angle via scale
B
A
Dimensions bending jaw
HSBM -S types
20
102
C
B
1000
332
303
1250
332
303
1500
360
332
2000
360
332
2500
360
332
3000
390
360
4000
390
360
L
F
G
Dimension bending jaw HSBM
E
1000
308
273
48
1250
308
273
48
1500
338
303
48
2000
338
303
48
2500
338
303
45
30
0°
46
86
1000
236
270
1250
236
270
1500
266
300
2000
286
320
2500
286
320
3000
368
333
45
3000
336
370
4000
368
333
45
4000
336
370
Accessories HSBM 1520-25 / S / SH
Rear stop simple, 75 - 765 mm
Rear stop including measuring device, 75 - 760 mm
Rear stop including measuring device and
stop finger, 6 - 760 mm
Foot pedal for clamping jaw
Roller cutter for steel sheet thicknesses of up to 0.8 mm
Item No
379 7000
379 7010
€ plus VAT
289.00
1,229.00
379 7020
379 7025
379 7030
2,049.00
569.00
659.00
Accessories HSBM 2020-20 / S / SH
Rear stop simple, 75 - 765 mm
Item No
379 7001
379 7011
€ plus VAT
305.00
1,289.00
Rear stop including measuring device, 75 - 760 mm
Rear stop including measuring device and
stop finger, 6 - 760 mm
Foot pedal for clamping jaw
379 7021
379 7025
Roller cutter for steel sheet thicknesses of up to 0.8 mm 379 7031
Built according to CE directives
G
D
120
78
C
100
L
E
20°
A
F
D
35
71
27
L
2,099.00
569.00
679.00
Accessories HSBM 2520-16 / S / SH
Item No
Rear stop simple, 75 - 765 mm
379 7002
Rear stop including measuring device, 75 - 760 mm379 7012
Rear stop including measuring device and
stop finger, 6 - 760 mm
379 7022
Foot pedal for clamping jaw
379 7025
Roller cutter for steel sheet thicknesses of up to 0.8 mm 379 7032
€ plus VAT
325.00
1,349.00
Accessories HSBM 3020-12 / S / SH
Rear stop simple, 75 - 765 mm
Rear stop including measuring device, 75 - 760 mm
Rear stop including measuring device and
stop finger, 6 - 760 mm
Foot pedal for clamping jaw
Roller cutter for steel sheet thicknesses of up to 0.8 mm
Item No
379 7003
379 7013
€ plus VAT
349.00
1,429.00
379 7023
379 7025
379 7033
2,249.00
569.00
729.00
2,179.00
569.00
699.00
115