Boiling water ready to drink in 80 seconds
Transcription
Boiling water ready to drink in 80 seconds
So simple to use: The first bottle water cooler in the world Boil fresh tap water and Turn the cooling Turn the screwed unit measure out 210 ml element 180°, put it on 180° again and put it with the break-proof the threaded neck of directly over the neck measuring cup. the measuring cup and of the baby bottle. Hot water runs automatically screw them together so through the cooling nothing drips. coil which is surrounded by the cooling water and cools down the boiling water. • works without power • fits on all baby bottles • boiling water ready to drink in 80 seconds Nürnberg Gummi Babyartikel GmbH & Co. KG Breitenloher Weg 6 D-91166 Georgensgmünd Tel.: +49 (0) 91 72/69 19-0 Fax: +49 (0) 91 72/69 19-11 E-Mail: [email protected] www.nip-babyartikel.de Product video Scan & Watch 86300-00-121 Rev. 17302 w e el.d k i t ar aby ip - b n . w w Boiling water ready to drink in 80 seconds Cool Twister – Bottle water cooler Food preparation in a jiffy When baby is hungry, it’s needed to move very, very fast. But germ and bacteria formation means that drinking water needs to be boiled first, before it can be cooled to the recommended drinking temperature for preparing a bottle. This takes its toll on both time and nerves. Depending on the specific recommendations of the follow-on milk or formula manufacturer, powder should only be added to water once it has cooled to 40, 50, 60 or 70°C. If the temperature falls below 40°C, the powder will not dissolve properly and lumps will form. On the other hand, exceeding the recommended temperature destroys important nutrients such as probiotic cultures. The Cool Twister provides the solution. It is the first bottle water cooler in the world to cool boiling water to drinking temperature in only 80 seconds! 100°C without g without p erms, ower Measuring cup made of break-proof plastic for 210 ml boiling water Sturdy cooling element made of plastic with water tank for cold water, cooling coil and filling level indicator Cooling coil made of high-quality aluminium is surrounded by the cooling water and cools down the boiling water according to the simple principle of heat exchange Non-drip screw cap can be opened and closed very easily with the base to fill and empty the cooling water Hygienic cover seals unit tight and germfree, in the refrigerator or on the go 70°C 60°C 50°C Base with integrated star handle on the bottom – for easy opening and closing of the sealing screw rat e p m e t exact ure 40°C Recommended by midwives 0BPA