PZL (PZ-11) Tiplex Drilling Mud Pump

PZL (PZ-11) Tiplex Drilling Mud Pump
SPECIFICATIONS
Maximum Input
1,600 BHP (1,193 kw)
Maximum RPM
115 RPM
Stroke Length
Piston Load
Pump Weight
Gear Ratio
PISTON CYLINDER
DISPLACEMENT – DRILLING SERVICE
MAXIMUM PSI
DIAMETER
PER REVOLUTION
MAXIMUM FLOW RATE
inch
mm
gallon
liters
GPM
LPM
PSI
bar
8
7.5
7.25
7
6.5
6.25
6
5.5
5
203
191
184
178
165
159
152
140
127
7.18
6.31
5.90
5.50
4.74
4.38
4.04
3.39
2.80
27.18
23.89
22.32
20.81
17.94
16.59
15.29
12.85
10.62
826
726
678
632
545
504
465
390
323
3126
2747
2567
2393
2064
1908
1758
1478
1221
2989
3401
3639
3904
4527
4897
5000
5000
5000
206
234
251
269
312
338
345
345
345
PUMP
RPM
115
JACKSHAFT
RPM
504
Ratings shown are for 5,000 PSI
Fluid End Cylinder. For 7,500 PS
Fluid End Cylinder, visit
www.gardnerdenverpumps.com
Weight: Complete pump with
large steel skid - 41,400 pounds.
Ratings are based on 90%
mechanical efficiency and
100% volumetric efficiency.
11 in. (279 mm)
150,300 lbs. (668,568 N)
37,000 lbs. (16,815 kg)
4.38 :1
PZL (PZ-11) Tiplex Drilling Mud Pump
OPTIONAL FEATURES
• Steel transportation and
placement skid for pump only
or larger maintenance skid with
non-slipping deck
• Fabricated, log style
suction manifold
• Centrifugal suction charging pump
• Custom packaging available
• Full open valve seats
• Suction stabilizer and/or
discharge damper
• External electric powered lube pump
8
7
6
5
4
3
1
2
REVISIONS
ZONE REV
DESCRIPTION
A NEW RELEASE PER ECN
DATE
DWN CHK
F
F
STANDARD FEATURES
• High strength, cast nodular iron
power frame, eccentric, connecting
rods, and crossheads
E
• Full roller bearing construction
at eccentric mains, jackshift,
connecting rods, and66.18
crosshead pins
SPECIFICATIONS
157.05
• Replaceable
bronze
crosshead slides
104.00
E
8
• Heat treated alloy steel, valve
over valve, interchangeable
fluid end modules
7
5
6
F
D
D
• Hyrdrostatic tested cast steel
discharge manifold
• Heat treated alloy steel, double
helical AGMA drive gears
• API suction and
discharge connections
• Double extended jackshift for
mounting sheaves or sprockets
157.05
E
C
C
D
66.18
B
B
C
CONFIDENTIAL:
CONNECT WITH US :
A
www.gardnerdenverpumps.com
8
1-866-GDPumps
7
6
facebook/GardnerDenverPumps
5
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE PROPERTY
OF GARDNER DENVER, INC. IT IS
NOT FOR PUBLIC DISCLOSURE.
POSSESSION OF THE INFORMATION
DOES NOT CONVEY ANY RIGHT TO
LOAN, SELL OR DISCLOSE THE
INFORMATION. UNAUTHORIZED
REPRODUCTION OR USE OF THE
INFORMATION IS PROHIBITED.
THIS DOCUMENT IS TO BE
RETURNED TO GARDNER DENVER,
INC. UPON THE COMPLETION OF
THE PURPOSE FOR WHICH IT IS
LOANED OR UPON REQUEST.
4
3
B
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED:
DECIMAL
.X = ±.05
TOLERANCES
.XX = ±.02
.XXX AS SPECIFIED
ANGULARITY: ± 0°-30'
CONCENTRICITY: Ø.015 AS DRAWN
125 MAX ON ALL MACHINED SURFACES
TAP DRILL DEPTHS ARE MAXIMUM
THREAD DEPTHS ARE MINIMUM
FINISH OF CHAMFERS & FILLETS TO CONFORM TO ROUGHEST
ADJACENT AREA
DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994
SURFACE ROUGHNESS MEASURED PER ASME B46.1
THIRD ANGLE PROJECTION
PZ11
APPROXIMATE WEIGHT
CUTSHEET
N/A
Tulsa, OK
GardnerDenverPumpsTV
2
A
TITLE
BREAK ALL SHARP EDGES .005-.015
DWN BY
TAS
CHK BY
XXX
4/21/2014
SIZE DWG NO.
D
REV
PZ11
A
SHEET
SCALE: TO FIT
1
1
OF
1
@GDPumps #pumpingperfected
4