docCariboni - Railway contact lines
download 
Report Transcription
Cariboni - Railway contact lines
CANTILEVERS H D CARIBONI RAILWAY CONTACT LINES CANTILEVERS Cariboni is a well-established European company, leader in the design, development and production of materials for railways and light rail. This entity was founded in 1908 and joined the Alstom Group in 2008. It has an extensive global experience in designing, manufacturing and installing a wide range of catenary products and components, using historic knowledge acquired in Europe and leveraging of global innovation capability and experience. The company benefits from certifications by AFNOR: ISO 9001, ISO 14001 and OHSAS 18001, regarding the design and manufacturing of bus bars, accessories for LV-MV-HV electrical lines, components and systems for electrification, traction, and low-voltage protection and control Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS ALUMINIUM CANTILEVERS 25kV cantilevers Speed up to 250 km/h Aluminium alloy tubes Fiberglass insulator with silicone rubber coating Geometry adaptable to project’s requirements H • • • • • D POS 1 2 3 4 5 6 Description Insulator Strut tube Top tube Register arm Reinforce tube Steady arm bracket attachment Catalogo TE – Rev. 2 - 07/01/2015 POS 7 8 9 10 11 12 Description Steady arm attachment Steady arm Tube attachment Mast attachment Messenger wire suspension Contact wire clamp CANTILEVERS H ALUMINIUM CANTILEVERS H H D D D Double cantilever for axis configuration H Double cantilever for intermediate configuration D Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS ITALIAN CANTILEVERS H • According to RFI standards D 3kV cantilever Cantilever for high speed italian lines 25kV cantilever Speed more than 300 km/h Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS OMNIA H • According to RFI standards • 3kV and 25kV cantilevers • Aluminium alloy structure H D D Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS STEEL CANTILEVERS 25kV cantilevers According to SNCF standards Speed up to 300 km/h Steel alloy tubes H • • • • D Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS STEEL CANTILEVERS • Steel cantilevers tubes • Approval according to SNCF technical specification IGTE 21465/3984 SNCF 21465/004905 SNCF 21465/203608 SNCF 21465/003004 SNCF 21484/232257 Catalogo TE – Rev. 2 - 07/01/2015 • • • • • Alstom Lecco new cantilever for easy installation and maintenance High adjustability Reduced weight Easy installation Easy maintenance Catalogo TE – Rev. 2 - 07/01/2015 CANTILEVERS CLever CANTILEVERS TUNNEL CANTILEVERS • Cantilevers for tunnel utilization • Steel and Aluminium alloy structure 25kV cantilever with distance and system height regulation RFI 772/077 RFI 772/079 Catalogo TE – Rev. 2 - 07/01/2015 Tunnel cantilevers according to RFI standards CANTILEVERS TUNNEL CANTILEVERS RFI 772/081 RFI 772/082 Tunnel cantilevers according to RFI standards RFI 772/076 RFI 772/078 Catalogo TE – Rev. 2 - 07/01/2015 • Complete adjustment system with tensioning device with pulleys in line Catalogo TE – Rev. 2 - 07/01/2015 TENSIONING DEVICES TENSIONING DEVICES TENSIONING DEVICES TENSIONING DEVICES • Tensioning devices with pulleys in line Tensioning device with “Anti-cut” system. 1:5 Tensioning device with “Anti-cut” system. According to RFI standards. RFI 902/169 1:5 Tensioning device with “Anti-cut” system for portal. According to RFI standards. RFI 902/168 1:5 Tensioning device with “Anti-cut” system addition if required. 1:4 Tensioning device with “Anti-cut” system addition if required. 1:3 Tensioning device according to RFI standards RFI 790/101 Catalogo TE – Rev. 2 - 07/01/2015 1:5 TERMINATIONS TERMINATIONS Termination for cable and contact wire Catalogo TE – Rev. 2 - 07/01/2015 TERMINATIONS TERMINATIONS • Termination’s parts Nominal voltage: 25kV Traction breaking load: 135kN Anchoring clamp RFI 774/313 Double plate RFI 790/127 Catalogo TE – Rev. 2 - 07/01/2015 TENSIONING DEVICES TENSIONING DEVICES • Complete adjustment system with tensioning device with single pulley Automatic compensation device 1:3 Catalogo TE – Rev. 2 - 07/01/2015 TENSIONING DEVICES TENSIONING DEVICES Tensioning wheel assembly Working load: 36kN Aluminium alloy wheel Catalogo TE – Rev. 2 - 07/01/2015 STEADY ARMS ALUMINIUM STEADY ARMS • Aluminium alloy tubes • Tubes and terminals are coupled by pressing Working load: 18,5kN 1200 Working load: 18,5kN 1300 Working load: 20kN 1400 Working load: 20kN 1150 Catalogo TE – Rev. 2 - 07/01/2015 STEADY ARMS STEEL STEADY ARMS • Steel tubes • Tubes and terminals are coupled by pressing Working load: 25kN L 400 < L < 2400 Working load: 25kN 1035 1075 Working load: 20kN Catalogo TE – Rev. 2 - 07/01/2015 STEADY ARMS SNCF ALUMINIUM STEADY ARMS • • • • Steady arm according to SNCF standards Approval according to technical specification IGTE 21465/3965 Aluminium alloy tubes Tubes and terminals are coupled by pressing SNCF 21465/203629 800 1200 SNCF 21465/203620 2000 SNCF 21465/204618 Catalogo TE – Rev. 2 - 07/01/2015 STEADY ARMS SNCF STEEL STEADY ARMS • • • • Steady arm according to SNCF standards Approval according to technical specification IGTE 21465/3965 Steel tubes Tubes and terminals are coupled by pressing 1200 SNCF 21465/203606 SNCF 21465/203607 800 L SNCF 21465/203622 Catalogo TE – Rev. 2 - 07/01/2015 STEADY ARMS INSULATED STEADY ARMS • Steady arm up to 3kV • Aluminium alloy, steel and bronze components L 900 < L < 1300 Working load: 12,5kN RFI 773/212 L 1500 < L < 1950 Working load: 15kN SNCF 21465/003059 1130 Working load: 15kN Catalogo TE – Rev. 2 - 07/01/2015 SNCF 21465/003086 STEADY ARMS INSULATED STEADY ARMS 1040 Working load: 20kN SNCF 21465/204795 L 1500 < L < 1950 Working load: 25kN SNCF 21465/003049 950 Working load: 40kN Catalogo TE – Rev. 2 - 07/01/2015 Industrial frequency withstand voltage (50Hz/60s): 14kV DROPPERS BRONZE DROPPERS • Droppers according to RFI and SNCF standards • Bz-Al alloy RFI 774/273 RFI 774/299 Impossibile visualizzare l'immagine. SNCF 21466/205123 Impossibile visualizzare l'immagine. Catalogo TE – Rev. 2 - 07/01/2015 Impossibile visualizzare l'immagine. SNCF 21466/205180 Impossibile visualizzare l'immagine. DROPPERS CUNISI DROPPERS • Droppers according to RFI standards • Material: CuNi2Si • Conductive droppers RFI 774/216 RFI 774/213 RFI 902/192 RFI 902/190 RFI 902/191 Catalogo TE – Rev. 2 - 07/01/2015 INSULATORS INSULATORS • Insulators for 3kV and 25kV lines • Fiberglass body with silicone rubber coating Nominal voltage: 3kV Traction breaking load: 40kN RFI 773/192 Nominal voltage: 3kV Traction breaking load: 40kN RFI 773/191 Nominal voltage: 1kV Traction breaking load: 300kN Fiberglass body with galvanized steel end fittings Catalogo TE – Rev. 2 - 07/01/2015 RFI 773/193 INSULATORS INSULATORS Nominal voltage: 3kV Traction breaking load: 135kN RFI 773/179 Nominal voltage: 3kV Traction breaking load: 135kN Nominal voltage: 25kV Traction breaking load: 50kN Nominal voltage: 25kV Traction breaking load: 135kN Catalogo TE – Rev. 2 - 07/01/2015 INSULATORS SECTION INSULATORS • Section insulators for 3kV and 25kV lines • Traveling speed 30 km/h, 60 km/h, 200 km/h RFI 773/145 3kV lines Maximum speed: 60km/h Impulse test voltage (dry): 125kV (messenger wire insulator) 80kV (contact wire insulator) Traction breaking load: 90kN (messenger wire insulator) 37kN (contact wire insulator) Power frequency withstand voltage (wet): 50kV (messenger wire insulator) 30kV (contact wire insulator) RFI 773/150 3kV lines Maximum speed: 30km/h Impulse test voltage (dry): 80kV (contact wire insulator) Traction breaking load: 37kN (contact wire insulator) Power frequency withstand voltage (wet): 30kV (contact wire insulator) Catalogo TE – Rev. 2 - 07/01/2015 INSULATORS SECTION INSULATORS RFI 902/189 3kV / 25kV lines Maximum speed: 200km/h Impulse test voltage (dry): 325kV (messenger wire insulator) 145kV (contact wire insulator) Traction breaking load: 90kN (messenger wire insulator) 53,7kN (contact wire insulator) Power frequency withstand voltage (wet): 140kV (messenger wire insulator) 70kV (contact wire insulator) Catalogo TE – Rev. 2 - 07/01/2015 CLAMPS MESSENGER WIRE CLAMPS • Material: Bronze Messenger wire clamp for cable 120mm2 RFI 774/257 Messenger wire clamp for two cables 120mm2 RFI 774/258 Catalogo TE – Rev. 2 - 07/01/2015 Clamp for two messenger wires CLAMPS CLAMPS FOR ALUMINIUM CANTILEVERS • Aluminium alloy, steel and bronze components Messenger wire suspension clamp for 25kV cantilever Attachment for 25kV cantilever Steady arm attachment for 25kV cantilever Steady arm bracket attachment for 25kV cantilever Catalogo TE – Rev. 2 - 07/01/2015 CLAMPS CLAMPS FOR CONTACT WIRE • Aluminium alloy, steel and bronze components Contact wire joint for CW 120-150 mm2 Contact wire clamp according to SNCF standards Contact wire clamp with bottom attachment SNCF 21465/004000 Contact wire clamp according to RFI standards Catalogo TE – Rev. 2 - 07/01/2015 RFI 774/215 RFI 902/033 RFI 774/266 CLAMPS CLAMPS Clamp for jointing two cables Material: Bronze RFI 774/303 Bifilar clamp for cable and contact wire Material: Bronze RFI 774/301 Linking clamp for cable Material: CuNi2Si RFI 902/187 Linking clamp for contact wire Material: CuNi2Si RFI 902/188 Catalogo TE – Rev. 2 - 07/01/2015 MAST ATTACHMENTS MAST ATTACHMENTS • Configurations variable according to the dimensions of the poles • Aluminium alloy and steel components Mast attachment for type HE 200-260 for 25kV line suspensions Lower mast attachment SNCF 21482/682101 Upper mast attachment Catalogo TE – Rev. 2 - 07/01/2015 MAST ATTACHMENTS MAST ATTACHMENTS Mast attachment for type HE 300 with double fork Italian standard attachment: Attachment of tie rod to mast type LS Italian standard attachment: Articulated attachment for tube cantilever to mast type LS Catalogo TE – Rev. 2 - 07/01/2015 RIGID CATENARY RIGID CATENARY • No need of auxiliary droppers to ensure straight contact wire. • Used in tunnels, parkings and railway lines to reduce height • In the area of transition between the traditional line and the rigid catenary, special bars are used to ensure a smooth passage of the pantograph Suspension system composed by insulated traverse that can be connected to the roof of the tunnel Catalogo TE – Rev. 2 - 07/01/2015 RIGID CATENARY RIGID CATENARY Aluminium-magnesium-silicon alloy bars Double fixed point clamp to split in two direction the variations of length Catalogo TE – Rev. 2 - 07/01/2015 Grounding device and short-circuit for 3kV lines RFI 817/494 Catalogo TE – Rev. 2 - 07/01/2015 GROUNDING DEVICES GROUNDING DEVICES DISCONNECTORS HOIST & DISCONNECTORS • According to RFI standards Hoist RFI 785/032 Disconnector The disconnector is an electromechanical organ included in an electric circuit in order to split the circuit or the line in a physical way Catalogo TE – Rev. 2 - 07/01/2015 ACCESSORIES ACCESSORIES Turnbunckles Tie-beams Yokes U-bolt clamps Lugs Catalogo TE – Rev. 2 - 07/01/2015 ACCESSORIES COUNTERWEIGHTS Counterweight 25 kg RFI 790/121 Counterweight 32,5 kg Catalogo TE – Rev. 2 - 07/01/2015 ACCESSORIES CARPENTRY Sharp plates for masts LS-LSF RFI 768/203 RFI 790/147 Catalogo TE – Rev. 2 - 07/01/2015 ACCESSORIES CARPENTRY Guide tube collar Infrabel 37.008.354 Double plate support Catalogo TE – Rev. 2 - 07/01/2015 REFERENCES REFERENCES & HOMOLOGATIONS REFERENCES: • • • • • • • • • • • • • • • • • • • • • • • • • • • Tunisia 1998 – Ville de Tunis: Tubes for lightweight train Italy 1998 - Trento-Malè line: Complete catenary system Brasil 1998 - Sao Paulo: Tubes and steady arms Italy 1999 - Circumvesuviana: Accessories for contact line Italy 1999 - Malpensa Express 2000: Complete catenary system Belgium 2000 - R1 Project: Complete aluminium consoles Singapore 2000 – Project NEL: Tensioning devices and cantilever’s components Italy 2000 - Sirti: Tensioning devices for HV line Italy 2000 - RFI: Section insulators Slovenia 2000 - Slovenian Railways: Accessories for contact line Italy 2000 - Roma-Napoli line: Accessories for contact line Italy 2001 - RFI: 3kV insulators & Tunnel cantilevers Italy 2001 - RFI: Steel structures for anchoring Italy 2001 - Italian HV line: Tensioning devices Belgium 2001 - SNCB: Tensioning devices England 2001/03 - Projet CTRL 1: Tunnel cantilevers & steady arms Belgium 2002 - SNCB: CuNi2Si Droppers Italy 2002 - Dorsale Adriatica: Cantilevers and accessories Italy 2002 - Rogoredo line: Accessories for contact line Italy 2003 - Circumvesuviana: Section insulators Slovenia 2003 - Slovenian Railways: Section insulators Italy 2003 - RFI: Groundind devices, CuNi2Si connectors & Tensioning devices France 2003 - SNCF: Cantilever’s tubes Slovenia 2004 - Slovenian Railways: Bz-Al Droppers & steady arms Italy 2004 - Patti-Messina line: Accessories for contact line Italy 2004 - Alifana Railway Projet 1: Cantilevers, tensioning devices, anchoring devices and Bz-Al droppers Catalogo TE – Rev. 2 - 07/01/2015 • • • • • • • • • • • • • • • • • • • • • • • • England 2004 - Projet CTRL 2: Tunnel cantilevers & steady arms Norway 2004 - Norwegian Railways: Tunnel cantilevers Italy 2005 - RFI: 3kV insulators Portugal 2005 - Somafel: Steady arms Belgium 2005 - SNCB: Tensioning devices Italy 2005 - Roma-Napoli line: Tensioning devices Italy 2005 - Roma-Firenze line: Anchoring devices Italy 2005 - Alifana Railway Projet 2: Cantilevers, tensioning devices, anchoring devices and Bz-Al droppers Italy 2006 - Napoli line: Bz-Al droppers and accessories Italy 2006 - Tratta Salone: Tensioning devices, steel anchorage devices and accessories Italy 2006 - Sangritania Railway: Tunnel cantilevers and accessories for contact line Italy 2006 - RFI: Cuni2Si droppers Norway 2006 - Jernbane Verket: Tunnel cantilevers France 2006 - Alstom: Steady arms Algeria 2006 - Project ‘’Bouchegouf-Souk Ahras’’: Steady arms Italy 2006 - TEB Bergamo: Cantilevers and anchorages Italy 2006 - RFI: Droppers Marocco 2007 - Project ‘’El Gharb Lot 1’’: Cantilevers, anchorage and tensioning devices Romania 2007 - Project ‘’Campina-Predeal’’: Steady arms and accessories Algeria 2007 - Project ‘’Bouchegouf-Souk Ahras’’: Steady arms and accessories Marocco 2007 - Project ‘’Sidi El Aidi - Settat’’: Cantilevers Marocco 2007 - Project ‘’El Gharb Lot 2’’: Tensioning devices Greece 2007 - Project ‘’Evangelismos-Leptokaria’’: Aluminium Cantilevers Marocco 2008 - Project ‘’Catenaire Tanger’’: Tensioning devices Greece 2008 - Project ‘’Athens Suburban Railways – Ska-Kiato Inoi-Halkida’’: Cantilevers, anchorage and tensioning devices REFERENCES REFERENCES & HOMOLOGATIONS REFERENCES: • • • • • • • • • • • • • • • • • • Turkey 2008 - Project ‘’Marmaray Suburban Railways’’: Cantilevers and anchorage devices Bulgary 2009 - Project ‘’Plovdiv-Svilegrad Phase 1’’: Aluminium Cantilevers Romania 2009 - SNEF Group: Aluminium Cantilevers and anchorage devices Greece 2009 - Project ‘’Piraeus-Athens’’: Aluminium Cantilevers Marocco 2009 - Project ‘’Catenaire Ksar - Tanger’’: Tensioning devices and steady arms Greece 2010 - Project ‘’Athens Suburban Railways’’: Aluminium tubes, steady arms and accessories Greece 2010 - Project ‘’Axios-Gefyra’’: Aluminium cantilevers Belgium 2010 - Infrabel: Tensioning devices Marocco 2010 - Project ‘’Catenaire Tanger lot base’’: Tensioning devices and steady arms France 2011 - SNCF: Tubes Greece 2011 - Project ‘’Polikastro-Idomeni’’: Aluminium cantilevers France 2011 - Project ‘’Cesaer’’: Cantilevers, steady arms, suspensions, clamps Norway 2012 - Jernbane Verket: Tunnel cantilevers France 2012 - SNCF: Cantilever’s tubes Marocco 2012 - Project ‘’Gare de tnine & Casablanca’’: Steady arms Marocco 2012 - ONCF: Anchorages and connectors France 2012 - Project ‘’Sillon Alpin Sud Phase 2’’: Tubes and droppers France 2012 - SNCF: Four-year agreement for the supply of complete steel tubes for catenary HOMOLOGATIONS: RFI (Italian Railway National Company) SNCF (French Railway National Company) ONCF (Moroccan Railway National Company) Infrabel (Belgian Railway National Company) ERGOSE (Greek Railway National Company) AFER (Romanian Railway National Company) • SNTF (Algerian Railway National Company) • NRIC (Norwegian Railway National Company) • • • • • For more information please contact Alstom Transport: Osvaldo Cariboni Lecco SpA Via Roma, 14 23855 Pescate (LC) Italy Phone: +39 03 41 35 87 11 Visit us online: www.alstom.com Catalogo TE – Rev. 2 - 07/01/2015
