Installation Guide for Schools

 Anjal 10 (MOE‐Singapore) License Server Installation Guide for School Labs Introduction Anjal 10 (MOE‐Singapore) software requires a license key and activation. A license key is required at the time of installation and activation is done once the license key is verified. Activation requires a connection to the Internet. Anjal 10 (MOE‐Singapore)’s license server software eliminates the need to have a license key entered in every desktop client installation on the network. Instead the server’s IP address is provided for the client and activation is done through the site license server. This document is written to help network administrators to setup and run Anjal 10 License server and Anjal 10 (MOE‐ Singapore) client software on a local area network. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 2 of 14
Installing Murasu License Server There are just 2 steps to the installation process: 1. Installing the server software 2. Installing the client software Installing the Server Software Pre‐requisites: a. Windows Server 2003 Standard b. Port 10098 (for client machines to communicate with server over the HTTP protocol) c. Port 80 (for activation of Murasu Anjal s/w over the internet) Folder (for Client Installations) a. In the Apps folder create a new Anjal MOE folder b. Download the Site License Client MSI, Anjal PDF Writer and the Dot Net files from http://anjal.net/moesg/sitelic and save it in the Anjal MOE folder Installation: © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Run the Site License Server MSI file that is saved in the Anjal MOE folder. Anjal 10 (MOE–Singapore) Lab Installation Guide Page 3 of 14
Murasu License Server Control Panel Start the Murasu License Server Control Panel from  Start\Programs\Anjal License Server\Anjal Server CP. The Murasu License Server Control Panel will be displayed. Leave the “Proxy IP” and “Proxy Port” field empty. Click on the “Save” button to save. Note: Check “Log Requests” only if you want to log all the requests that are coming form the clients. This is to be used for troubleshooting purposes only. The log file is created in the same directory where the server software is installed (typically C:\Program Files\Grow Momentum\Murasu Anjal Site License Server) Click the “Install Service” button to install the License Server Service application. Once the service is installed, you will get a notification message. Next click “Start Service” to start the license server process. Note that you may be prompted to allow access to the port 10098. Ensure that you click “Unblock” to allow client communications. The server setup is now complete. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 4 of 14
Installing Client Software This guide provides the installation instructions for desktops and notebooks installed with: a) Windows XP Professional (SP 2) Operating System; and b) Microsoft Office 2002 and 2003 productivity suite There are two steps to the client installation process: • Pre‐requisites • Installing the Anjal 10 (MOE‐Singapore) software Pre­requisites Anjal 10 (MOE‐Singapore) requires Complex scripts to be installed in all client machines. This installation requires copying files from the Windows CD‐Rom; hence please have the Windows XP Professional CD‐Rom on hand before you begin the installation. a) Installing Complex script Go to
• Start Menu
• Settings
• Control Panel
• Double-click “Regional and Language
Options”
Regional and Language Options Dialog
box will appear as shown in the figure in
the left
• Select “Languages” tab
© Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide b) Enable the Advanced Text Services framework Page 5 of 14
•
Enable the “Install files for complex
script and right-to-left languages”
option
Note: Once you enabled the checkbox, you
will be prompted for the Windows
CDROM; to copy additional files to
support the complex scripts
You will need to click “Apply” button
before the settings take effect, and it is
quite likely that the system will need to be
rebooted afterwards.
© Grow Momentum (S) Pte Ltd, All Rights Reserved.
•
Click on the “Details” button in the
“Languages” tab in the “Regional
and Language Options”
•
“Text Services and Input
Languages” dialog box will appear
as shown in the figure in the left
•
Select the “Advanced” tab
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 6 of 14
•
•
Under the “Advanced” tab, enable the “Extend support of advanced text services to all programs” option Click on “Apply” followed by clicking on the “Ok” button for subsequent dialog boxes. Client Installation (Do for all client computers which will be used for Tamil Computing purposes) a. Run the Site License Client MSI from Anjal MOE folder on the client machines. • Please use for : User Name: School Name Email Address: TA’s email address Serial Number : Enter Server IP address.  Note that each entry must be 3 digits. If the server IP address is 192.16.8.129, then enter the value as 192.016.008.129 • Click next and follow the instructions on the screen to complete the installation. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 7 of 14
b. Once installation is complete, grant Full Control rights to “Everyone” to the folder c:\Program Files\Grow Momentum . c. Next, grant Full Control rights to “Everyone” to the folder, c:\Windows\Temp. d. Run the Anjal PDF Writer saved in the Anjal MOE folder. This will extract the Anjal PDF Writer files into a folder. To install, run the Setup.exe. The client installation is now complete. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 8 of 14
Other Settings Formatting Fonts (Setting “Anjal Inaimathi Sch Book” to be the default font when in Tamil mode) Click on Yes. Formatting of Fonts is now complete. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Open up Microsoft Word
•
Click on Format  Fonts
Next, go to •
Complex Scripts  Font •
Select Anjal Inaimathi Sch Book •
Click on Default Anjal 10 (MOE–Singapore) Lab Installation Guide Page 9 of 14
Please shutdown and restart the system. Upon login please do the following: 1. Open MS Word Application Click on
• Language bar
• Tamil
• Options
• Visual keyboard
• Character Palette
2. Check the letters on the “Visual Keyboard” and “Character Palette” are displayed. 3. Check that the Look‐Up Word can be invoked in MS Word. (Please ask the Tamil teacher to type some Tamil words and then press the “ESC” key. The look‐up word dialog box should display as shown below.) © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 10 of 14
Note: Whenever a new user is using the system and if the user cannot view the visual keyboard and the character palette, it is important to shut down and restart the system. If the client machines are installed with Kanian UV Software, please read the next section. Co‐Existence with Other Tamil IM Software (Like Kanian UV) The MOE TLTIS project requires that Anjal 10 (MOE‐Singapore) co‐exists with existing Tamil input software for a period of 6 months from date of commissioning. Anjal 10 has been designed to co‐exist with other Tamil input software that are used in Singapore schools today. However, because of the nature of input methods, only one input method can be active at a time for a given language. This requirement specifically affects computers with Anjal 10 and Kanian UV installed in the same computer. There is no need to uninstall either software during the co‐existence period. However, one of them needs to be de‐activated for the other to be active. The steps below show how to deactivate and reactivate input methods. © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Anjal 10 (MOE–Singapore) Lab Installation Guide Page 11 of 14
If user needs to use Kanian UV, de‐activate Murasu Anjal. •
•
© Grow Momentum (S) Pte Ltd, All Rights Reserved.
Select “Settings” from the
Language Bar
“Text Services and Input
Languages” dialog box will
appear as shown in the figure in
the left
•
Select the ‘Settings’ tab
•
Select the input method to deactivate (picture shows deactivating Murasu Anjal)
•
Click “Remove”
Anjal 10 (MOE–Singapore) Lab Installation Guide If user needs to use Murasu Anjal, de‐activate Kanian UV. •
•
•
•
•
•
© Grow Momentum (S) Pte Ltd, All Rights Reserved.
Page 12 of 14
De-activating Kanian UV
Select “Settings” from the
Language Bar
“Text Services and Input
Languages” dialog box will
appear as shown in the figure
in the left
Select the ‘Settings’ tab
Select the input method to deactivate (picture shows deactivating Kanian UV)
Click “Remove”
Anjal 10 (MOE–Singapore) Lab Installation Guide Re‐activating Add Murasu Anjal or Kanian UV to the Keyboard © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Page 13 of 14
Re-activating Murasu Anjal
•
Select “Settings” from the
language bar
•
“Text Services and Input
Languages” dialog box will
appear as shown in the figure in
the left
•
Click the “Add” button
•
“Add Input Language” dialog box
will appear
•
Select “Tamil” under the ‘Input
language’ drop-down list and
select Murasu Anjal from the
‘keyboard Layout/IME’ list
(picture shows re-activating
Murasu Anjal)
•
Click the “Ok” button.
Note: Similarly the above steps
should be carried out if you require
to re-activate Kanian UV.
Anjal 10 (MOE–Singapore) Lab Installation Guide Technical Support For all technical support, please contact: DID: 68998065 Email: [email protected] © Grow Momentum (S) Pte Ltd, All Rights Reserved.
Page 14 of 14