FAQ UID

UIDAI
Unique Identification Authority of India
Planning Commission, Govt. of India (GoI),
3rd Floor, Tower II,
Jeevan Bharati Building,
Connaught Circus,
New Delhi 110001
FAQ’S
VERSION 1.1
© UIDAI, 2009 - 1010
http://uidai.gov.in/
Page 1 of 35
Version 1.1.0.2
Frequently Asked Questions
Table of Contents
1.
FAQ’S....................................................................................................................................... 3
2.
INSTALLATION RELATED ISSUES:........................................................................................ 4
3.
USER AND AUTHENTICATION RELEATED ISSUES: ........................................................... 11
4.
COMPATIBILITY ISSUES AND AADHAAR ENROLMENT CLIENT INSTALLATION
(INCLUDING BIOMETRIC DEVICES) ERRORS ............................................................................. 19
5.
AADHAAR ENROLMENT UN-INSTALLATION DOCUMENT ................................................ 35
5.1
BELOW
5.2
IF THE BIO-METRIC VDM’ S ARE FROM CROSS MATCH TECHNOLOGIES, UN-INSTALL AS GUIDED
: 35
IF THE BIO-METRIC VDM’S ARE FROM L1 IDENTITY DEVICES , UN-INSTALL AS GUIDE BELOW : ..... 35
© UIDAI, 2010
Page 2 of 35
Version 1.1.0.2
1.
Frequently Asked Questions
FAQ’s
Aadhaar Enrolment Client Installation Screen Shots:
AADHAAR_Setup_Do
c_1.0.6_07302010.docx
© UIDAI, 2010
Page 3 of 35
Version 1.1.0.2
2.
Frequently Asked Questions
Installation related Issues:
It is assumed that the User who reads the FAQs has already read
the Enrolment Client User Guide attached above.Aadhaar
Enrolment Client Installation Screen Shots:
1) What is the pre-requisite to install the Aadhaar enrolment process ?
• Laptop (Intel Core 2 Duo T7250 (2.0Ghz, 800MHz FSB, 2MB L2 Cache) /15.4"
bright view Widescreen XGA/ 2 x 1024 MB DDR 2 667MHz/ 80GB SATA HDD
@ 5400rpm), USP ports – 4 or hub to connect hardware devices.
•
Desktop ( 2GHz 1 Dual core CPU, 2GB RAM, 160 GB HDD, 100Mbps NIC Windows XP Professional - SP3)
•
Desktop ( 2GHz 1 Dual core CPU, 2GB RAM, 160 GB HDD, 100Mbps NIC Windows 7 Professional / Enterprise Version)
•
Desktop ( 2GHz 1 Dual core CPU, 2GB RAM, 160 GB HDD, 100Mbps NIC Windows Vista)
•
Bio-metric devices - Iris scan(Cross Match/L1), Digital photo camera , Finger
Slap device (Cross Match/L1 ).
The user should be an administrator to log into Aadhaar Enrolment Client
alternately user with administrative privilages can also install the Aadhaar
Enrolment client.
Laptop or Desktop should have updated O/S. (which can be performed by
connecting to internet and selecting live windows udpate)
•
•
(This is the user name and password that the user uses to login to the
laptop/desktop)
Note: Administrative privileges The user should have system administrative
rights i,e to add or remove programs,create new user,install new library files etc
• Internet Connection mandatory during Installation (Preferably Broadband
internet).
2) While installing Aadhaar Enrolment client should do we need to change any
security setting on my Laptop/Desktop ?
NOTE: Users working on Windows Vista or Windows 7, Kindly turn off UAC or
login as Machine Admin account
Turn off UAC in Windows 7: Control Panel (Complete View) User Accounts User Account Control Settings Scroll the bar down to Never Notify (Ref Screen
Shot below )
© UIDAI, 2010
Page 4 of 35
Version 1.1.0.2
Frequently Asked Questions
Turn off UAC in Windows Vista: Control Panel (Complete View) User
Accounts Turn User Account Control (UAC) on or off Uncheck ‘Turn User
Account Control (UAC) on or off’
3) Who can install the software ?
Any person who is nominated by Register and has the valid user name /
password (Ref FAQ :8 for user id creation) created on the Laptop/Desk top. (ref
FAQ 1 also)
4) What does the installation kit contain?
The installation setup (AadhaarEnrolmentClientSetup_<DDMMYY>.zip) pack
contains the following installable:
•
Documents
1. AADHAAR_Registrar_Integration Manual
2. EnrolmentClient_OperatorManual
3. EnrolmentClient_OperatorManual
•
© UIDAI, 2010
FullInstallation
1. EnrolmentClient_OperatorManual_v1.0_(RC_4)_Beta
2. dotnetfx35sp1
3. install-32
4. Installation Guide
5. R2Plain
6. READ ME
7. Setup_270710_01
Page 5 of 35
Version 1.1.0.2
Frequently Asked Questions
8. windowsinstaller4_5
5) Which operating system is compatible for Aadhaar enrolment client installation?
Operating System: Windows XP SP3 OR Windows 7 (32-bit editions).
6) Where can I find the installation steps document?
Along with the installation kit : Read me document gives step by step
information.
7) Where will I find the drivers for Bio-metric devices i.e. (Iris Scan, Slap/Finger
Print Scan and Camera/ webcam)?
The drivers/VDM’s are available along with the Aadhaar Enrolment Client setup
(Iris and Finger Slap Scan are from Cross Match Technologies/L1 Identity
solutions and Mobileyes or other Certified Vendors)
Any camera which is 2MP is recommended(Drivers are provided by the
respective Vendors).
8) Can I use the existing database (SQL 2008 or any other database) installed on my
Desktop/ Laptop?
No, If any database is already installed on the desktop/laptop the installation
process might throw an error. To resolve errors, contact Help Desk.
9) Should the Enrolment client be installed in the same order as specified in the
README document ?
Installation Pre-requisites
•
•
•
•
•
•
Operating System: Windows XP SP3 OR Windows 7 (all 32-bit editions)
Windows Installer 4.5
Microsoft .Net Framework 3.5 SP1
Microsoft SQL Server 2008 R2 Express
Vcredist Setup
Aadhaar QSS SDK Setup (To be installed only on Windows XP SP3 and
Win 7 O/S (all 32-bit editions))
All the mentioned Pre-requisites are mandatory and the application should be
executed only after installing all the installation of all the Pre-requisites is
successfully installed.
•
•
© UIDAI, 2010
Client
CrossMatch Vendor Device Manager
[This is the sample VDM that can be used with
Cross Match devices; other certified VDM can
also be used.]
Page 6 of 35
Version 1.1.0.2
Frequently Asked Questions
10)How will I know if my LapTop/Desktop has the .NET Framework version which
is compatible with Aadhaar enrolment client?
The updated .net version is a part of pre-requistes which can be installed before
installing Aadhaar Enrolment client.
AADHAAR_Tech_Doc
_InstallProcedure.Net3.5SP1.docx
This is applicable only to Win XP O/S only.
11)How to configure the enrolment station information?
This should be configured by the Registrar Only. The user needs to login to Aadhaar
Enrolment client as Administrator/Administrator User. After logging in Enter relevant
information and click on register (fresh configurations only)/save
12)How to confirm if the biometric devices are recognized by the Enrolment Client?
After logging into the Aadhaar Enrolment Client check the footer area i.e. Left hand
bottom corner.
The first image indicates if the Iris scanner connection.
The second image indicates the camera connection.
The third image indicates the Slap/ Finger print scanner connection
The forth image indicates the Printer connection
© UIDAI, 2010
Page 7 of 35
Version 1.1.0.2
Frequently Asked Questions
A red icon will appears on top of the images if devices are not connected or
recognized. The red icon will not be seen if the devices are recognized as shown in
the below screen shot (This screen shot indicates that Iris, Finger Print and Printer
are not connected/recognized, only Camera is recognized).
13)Where can i get the transliteration software?
Transliteration software can be downloaded from Google website
Weblink : http://www.google.com/ime/transliteration/
Choose the language and select 32 bit to download.
© UIDAI, 2010
Page 8 of 35
Version 1.1.0.2
Frequently Asked Questions
14)How can I enter the data in Vernacular language (Local or Devanagiri script)?
Once the data is entered in English, move the mouse pointer aside the Vernacular
Text box-The Local or Devanagiri Scripts will auto-populate.
15)How to correct the incorrect transliteration in Aadhaar Enrolment Client?
If the Google ime is installed on desktop/laptop, the fields are editable and can
be corrected as shown (ref screen shot below).
16)Can I Upload the master pincode data after the AadhaarClient Intallation is
completely?
© UIDAI, 2010
Page 9 of 35
Version 1.1.0.2
Frequently Asked Questions
No, Master pincode data needs to be downloaded along with the
AadhaarEnrolment Client Set_up only.
In case of pincode is missing for the particular region/village/town, contact UIDTechnical support team or Helpdesk.
17)Whom to reach out incase the pincodes are missing for the current enrolment
drive?
Ensure that the Pincodes required for the current Enrolment drive are available
if its missing,contact UID Technical Support team or Help desk
18)How can I import the Pre-Enrolment data into Aadhaar Enrolment Client ?
Once the Aadhaar Enrolment Client installation is done completely, the
Operators/ Supervisors or registrars can upload the data using “Import PreEnrolment” Tab. Once the data is uploaded, until new upload happens the data
will remain in the system. (Ref Screen below)
© UIDAI, 2010
Page 10 of 35
Version 1.1.0.2
3.
Frequently Asked Questions
User and Authentication releated issues:
19)While logging into Aadhaar enrolment client what should I do if I get an error
“Invalid user name or password” ?
This error comes if
1. Either the user name or password is not correct
2. Or the user has no password created for the login user name.
It is mandatory to have users created with administrative privileges.
Password cannot be reset to blank. (Refer the Screen Shot given below). Ensure
the user uses the “Name” and not Full Name to log into the application
The Test user in not
present in list of users
created. Hence, the error.
Create a user by name test.
20)How can I create user for enrolment client?
1. In Windows XP: Go to Start -> Control Panel/Settings -> User Accounts ->
Click on Advance ->
-> Again Select Advance ->Click on User Folder -> Right click the mouse on
selecting the User folder ->
-> New window opens up to create the New User. (Refer screen shot below)
Make sure to enter password and uncheck the radio button if you wish not
reset the password on first logon.
© UIDAI, 2010
Page 11 of 35
Version 1.1.0.2
Frequently Asked Questions
(Refer screen shot below)
Make sure the
password
is
also
created
for
the
respective
user.
© UIDAI, 2010
Page 12 of 35
Version 1.1.0.2
Frequently Asked Questions
21)How I can grant system administrator privileges to the user?
The steps are applicable for both Windows XP OS and Windows 7
On the system Desktop :select My Computer icon -> Right click the Mouse >Select Manage -> Expand Local Users & Groups -> Highlight the Users Group
and select the user you wish to Grant the system admin privileges to -> Right
click on the Mouse and select properties->Select “member of Tab” -> Click on
“Add “ Tab -> Type Administrator and click on check names-> Confirm OK as
shown in the below screen shot.
Also make sure the respective user id or login id (other then administrators) is part of
administrator group (Ref screen shot below).
© UIDAI, 2010
Page 13 of 35
Version 1.1.0.2
Frequently Asked Questions
22)How will I know if the user has system administrator privileges?
The given steps are applicable for both Windows XP OS and Windows 7 OS.
On the system Desktop :select My Computer icon -> Right click the Mouse >Select Manage -> Expand Local Users & Groups -> Highlight user wish to Grant
the system admin privileges -> Right click on the Mouse and select properties>Select “member of” Tab -> Under this Tab ‘administrators’ should be displayed.
This confirms that the user has System Administrator privileges. (Refer
screen shot below)
© UIDAI, 2010
Page 14 of 35
Version 1.1.0.2
© UIDAI, 2010
Frequently Asked Questions
Page 15 of 35
Version 1.1.0.2
© UIDAI, 2010
Frequently Asked Questions
Page 16 of 35
Version 1.1.0.2
Frequently Asked Questions
23)What is the error - Operator is currently not registered. Kindly contact the
Administrator/Rregister to get registered as an operator ?
Operator should be registered before the Aadhaar enrolment client is installed. If
the user is not the registered with in the enrolment client will display the above
message. The user can be registered after client is installed in the user credential
should be reset. Contact Helpdesk to reset the user credentials.
The registrar will create a credential file to maintain the credentials of the users of the
enrolment client like operators and supervisors. The file will contain details like:
∗ Operator/supervisor ID- This will not be the UID. This is mapped with the UID of
the users at the server
∗ Operator/supervisor Name- will be auto-populated based on the operator ID input
from the operator/supervisor
∗ Type- to determine whether it’s an operator or a supervisor.
Currently, the credential database is imported as part of installation launch itself.
If any of the text field doesn’t adhere to the data type i.e. if there are characters which are
mentioned as part of data type for the fields mentioned above, the application shall not import the
file and throw an error message.
© UIDAI, 2010
Page 17 of 35
Version 1.1.0.2
Frequently Asked Questions
24)How to register the Aadhaar Enrolment Client ?
Registrar should enter valid RegistrarID,Enrolment Agency Code and Station
Number (Refer screen shot below for format description)
Once the information is entered click on register to proceed with the
authentication. If Enrolment AuthUser or Enrolment AuthCode is missing
contract UID Technical Support or Help desk to generate afresh.
© UIDAI, 2010
Page 18 of 35
Version 1.1.0.2
4.
Frequently Asked Questions
Compatibility issues and Aadhaar Enrolment Client
Installation (Including Biometric devices) Errors
25)What does “Error importing the master data. Please contact system
administrator” error mean?
This is usually seen when user credentials folder is not updated with any user
information.
Kindly take care of two different issues :
a) The user credentials file shouldn’t have any user repeated.
b) There shouldn’t be any user which has special characters.
26)What to do if the enrolment client application doesn’t recognize the Bio-metric
devices (Iris ,Figure Print or lap scan,Digital Camera) ?
Check if the device drivers are installed, you can do this by checking the
Services.msc from the Run Command as shown below:
© UIDAI, 2010
Page 19 of 35
Version 1.1.0.2
Frequently Asked Questions
•
Stop all the above services in the following order by right-clicking on the service and
clicking on Stop.
o Cross Match VDM IScan
o Cross Match VDM LScan
o AADHAAR Camera Vendor Device Manager
o AADHAAR Biometrics Device Manager
•
Now start all the above services in the following order by right-clicking on the
service and clicking on Start.
o AADHAAR Camera Vendor Device Manager
o AADHAAR Biometrics Device Manager
o Cross Match VDM IScan
o Cross Match VDM LScan
For Crossmatch devices the drivers will be installed as part of the Enrolment Client
installation pack. In case of other vendors, the devices the drivers needs to be installed
separately. For Web Cam (for e.g.: Logitech) the drivers need to be installed either
online or offline.
© UIDAI, 2010
Page 20 of 35
Version 1.1.0.2
Frequently Asked Questions
27) What steps should be taken to solve the Error : Cannot drop database
AADHAAREnrolmentClient
This error is seen in either of the cases:
1. when the UID_Import folder is not pasted in C:/ drive as mention in to
user doc. (Copy the “AadhaarEnrolmentClient” folder as-is to “C”
drive From the downloaded Aadhar Enrolment setup location on
Desktop/laptop. Refer screen shot below)
2. Windows logged in user is not the system administrator.
If still an issue Escalate to L2 Technical Support
28) What is Setup Error?
This error occurs in either of the below cases:
1. The Enrolment Client is not copied in C:\ drive. (Copy the
“AadhaarEnrolmentClient” folder as-is to “C” drive From
© UIDAI, 2010
Page 21 of 35
Version 1.1.0.2
Frequently Asked Questions
C:\UID_Installables\ AadhaarEnrolmentClientSetup\Enrolment
Client Setup\ AadhaarEnrolmentClient : refer below screen shot)
2. Windows logged in user is not the system administrator
3. Go to C:\Program Files\Microsoft SQL Server and delete the
AADHAAREnrolmentClient.mdf from Data folder and
AADHAAREnrolmentClient_log.ldf from Log folder Uninstall the
Aadhaar Enrolment Client Only Re-install Aadhaar Enrolment from the
setup.exe (Refer below screen shot)
If still an issue contact UID Technical Support/Help Desk.
29)What is “Requested registry access is not allowed” error?
This Error is seen only when Installed user (logged into Aadhaar Enrolment
Client) doesn’t have administrative privileges
To rectify this login as the administrator and install the Aadhaar Enrolment
Client again.
© UIDAI, 2010
Page 22 of 35
Version 1.1.0.2
Frequently Asked Questions
30)How can I uninstall the Aadhaar Enrolment client from Desktop\laptop ?
• Login to the machine with an account having administrator access.
• Stop all the services as mentioned in the section “”
• To un-install the application, go to “Control Panel -> Add/Remove
Programs” and remove the installed components in the following order:
• AADHAAR Enrolment Client
• VendorDeviceManager
• L SCAN Essentials 6.2.1.0 Runtime
• I SCAN Essentials 16.0.0.400 Runtime
• AADHAAR Biometrics Components
• Vcredist Setup
• Aadhaar QSS SDK Setup
Please note that un-installation of the above components will not uninstall any of
the pre-requisites that would have been installed, viz. SQL Express 2008, .NET
Framework 3.5 SP1, Windows Installer 4.5, Windows Installer 3.1.
31)What is the error “Another version of this product already installed”?
Aadhaar Enrolment Client is already installed on your laptop/Desktop. To update
to newer version uninstall Aadhaar Enrolment client (only) and reinstall the
same.
© UIDAI, 2010
Page 23 of 35
Version 1.1.0.2
Frequently Asked Questions
32)After installation if there is error “system log is full” what should I do (Refer
screen shot below)?
Go to run and type eventvwr ->Select Application under Windows logs -> right
click and clear all the events.
33)I get the below error while installing Aadhaar Bio-metric Client “ Cannot Start
Application ” Application download did not succeed ?
This is seen if the Aadhaar Enrolment client is installed without un-zipping the
Aadhaar Enrolment Client from the FTP server.
© UIDAI, 2010
Page 24 of 35
Version 1.1.0.2
Frequently Asked Questions
34)Bellow error is seen during Aadhaar login Enrolment Client ?
You can ignore this and proceed further to login Aadhaar Enrolment Client.
This error is usually seen during incomplete Aadhaar Enrolment client
installation – hence cannot create database on the already existing datebase
during Installation process.
If still an issue follow below steps Go to C:\Program Files\Microsoft SQL Server and delete the
AADHAAREnrolmentClient.mdf from Data folder and
AADHAAREnrolmentClient_log.ldf from Log folder Uninstall the Aadhaar
Enrolment Client Only Re-install Aadhaar Enrolment from the setup.exe
(Refer below screen shot)
© UIDAI, 2010
Page 25 of 35
Version 1.1.0.2
Frequently Asked Questions
35)While downloading google ime getting the error Download error. The
downloaded file failed verification. Error code =0x80040508
There hasn't been a definitive answer to this one. I assume the full error is
"Download error. The downloaded file failed verification. Error code =
0x80040508 "
There is certainly a problem using a proxy server, see this article in the Google
Pack help center:
http://www.google.com/support/pack/bin/answer.py?hl=en&answer=56921
However try it behind a corporate proxy requiring authentication will get a clear
message telling why the installation failed.I think the only solution for you would
be to get a copy of the full installer.
OR
check with your (work-place due to firewall setting) network team, so as to allow
or open port to download software for Goggle ime (Could be for half an or so).
36)Not able to configure System configuration for Enrolment Agency (Register and
Agency Details) and Edit tab is grayed as shown below
This is usually seen if the user logged into Aadhaar Enrolment Client is not the
Administrator or Administrator User. Hence its the tab’s are unable to edit. (Refer FAQ
User and Authentication releated issues:)
If the attached .pdf steps doesn’t help then sometimes the Administrator itself will not
the added to any group hence need to confirm -( Win XP O/S) : My Computer Right
© UIDAI, 2010
Page 26 of 35
Version 1.1.0.2
Frequently Asked Questions
click using mouse Manage Local users and Groups Groups Double click on
the Administrator Pop-up window should display Administrator under General tab
37)While installing SQL 2008 R2 getting an error : ngen.exe - Application error “The
application failed to initialize properly (0xc0000005)”
This is error is not related to Aadhaar Client Installation.
ngen.exe - Application Error - The application failed to initialize properly (0xc0000005).
We suggested the client to reinstall the operating system however they were still facing
the issue.
When the system has an OS Windows XP SP3 installed and not even any of the .Net
Framework has been installed please follow the steps given below to resolve the issue.
1.
Click on Start>Run>Cmd and in the Command Window Type msiexec check if
the Windows Installer is 4.5
2. Go To Services and check if the windows installer service is started and
automatic.
3. Once the above 2 steps are in place to install the .Net Framework Please click on
the link given below:
http://www.microsoft.com/downloads/details.aspx?FamilyID=d0e5dea7-ac264ad7-b68c-fe5076bba986&displaylang=en
© UIDAI, 2010
Page 27 of 35
Version 1.1.0.2
Frequently Asked Questions
This Download will contain Microsoft .NET Framework 3.5 service pack 1 is a
cumulative update that contains .NET Framework 2.0 service pack 2 and .NET
Framework 3.0 service pack 2 cumulative updates.
Hence we will no longer face the ngen.exe error.
38).NET 3.5 framework download error
Ideally this is seen if the .NET Framework 3.5 SP1 download has been abruptly stopped
(could be due to various reason or due to connectivity issues ). Kindly make sure the
Laptop/Desktop is connected while installing .NET Framework.
1) Check for windows updates and install everything recommended
2) Reboot the machine
3) Run 3.5 setup again
39)While installing the client below error is seen during setup – An error occurred
while installing system components for UID. EnrolmentClient. Setup cannot
continue until all system components have been successfully installed.
© UIDAI, 2010
Page 28 of 35
Version 1.1.0.2
Frequently Asked Questions
This is seen if the dependent software are not installed on laptop/desktop (Aadhaar
Bio-metric Components etc ) Kindly follow un-installation procedure as stated below
•
To un-install the application, go to “Control Panel -> Add/Remove Programs” and
remove the installed components in the following order:
• AADHAAR Enrolment Client
• VendorDeviceManager
• L SCAN Essentials 6.2.1.0 Runtime
• I SCAN Essentials 16.0.0.400 Runtime
• AADHAAR Biometrics Components
• Vcredist Setup
• Aadhaar QSS SDK Setup
PLEASE FOLLOW THE ORDER OF UNINSTALLATION (Also refer Pre-requsites in
Readme doc received Along with Aadhaar Enrolment Client zip folder)
Please note that un-installation of the above components will not uninstall any of the
pre-requisites that would have been installed, viz. MICROSOFT SQL SERVER 2008 R2
EXPRESS, .NET Framework 3.5 SP1, Windows Installer 4.5, Windows Installer 3.1.
© UIDAI, 2010
Page 29 of 35
Version 1.1.0.2
Frequently Asked Questions
40)While un-installing the Aadhaar Bio-metric vendor device manager (I-Scan sdk)
Error 1001 : An exception occurred while uninstalling.
Click on OK and un-install from Add and Remove Programs if still the issue exists
escalate to L2 Engineers.
41) While searching any object from Aadhaar Enrolment client window getting an
error : Login failed for user ‘uid’ (Ref below screen shot)
This is seen if the password entered for SQL express 2008 is other then the one
mentioned installation guide. (Ideally should be ‘Aadhaar123’)
© UIDAI, 2010
Page 30 of 35
Version 1.1.0.2
Frequently Asked Questions
Select “Mixed Mode (SQL Server authentication and Windows authentication)” as
“Authentication Mode” and Enter password for system administrator (sa) account as
“Aadhaar123” and confirm the same password. Click on “Next >” button to proceed
with the installation
Note :If SQL Server administrators is not selected then please click on “Add Current
User” button to add the current admin user.
42)While uninstalling SQL 2008 R2 getting an SQL Network Interfaces error:26 –
Error Locating Server/Instance Specified
© UIDAI, 2010
Page 31 of 35
Version 1.1.0.2
Frequently Asked Questions
Kindly contact system administrator to un-install SQL 2008 R2.
This is due to incomplete SQL 2008 R2 un-installation, where the instance created in
earlier SQL 2008 R2 installation is deleted completly.
43)While logging into Aadhaar Enrolment Client getting an error “Object reference
not set to an instance of an object” Invalid user name and password.
Go
to
C:\ProgramFiles\Microsoft
SQL
Server
and
delete
the
AADHAAREnrolmentClient.mdf from Data folder and AADHAAREnrolmentClient_log.ldf
from Log folder. If still a issues contact UID Technical Support /Help desk.
44) Where can get installation guide for L1 Identity devices ?
Refer below doc for installation guide.
L1_Biometric_Installa
tion.docx
45) L1 Identity Slap Scan is not being recognized by Aadhaar Enrolment client?
Kindly stop and start the services as guide below :
Make sure only one (Vendor) VDM is running for particular Device (Slap Scan)
and Go to Run and type services.msc Stop the below services
o
o
o
o
L1 Agile TP VDM for AADHAAR
L1 ID MobileEyes VDM Service
AADHAAR Camera Vendor Device Manager
AADHAAR Biometrics Device Manager
© UIDAI, 2010
Page 32 of 35
Version 1.1.0.2
Frequently Asked Questions
Now Start the services
o
o
o
o
AADHAAR Camera Vendor Device Manager
AADHAAR Biometrics Device Manager
L1 Agile TP VDM for AADHAAR
L1 ID MobileEyes VDM Service
If still the issue contact UID Techsupport / Help desk.
46) I am getting below error while logging into Aadhaar Enrolment Client?
This is due to SQL instance not being removed completely during un-installation.
Kindly un-install Aadhaar Enrolment Client, SQL 2008
And make sure there is no folder in the below mentioned path :
Start All ProgramsSQL 2008 (if any kindly delete the folder).
Once done Install SQL 2008 R2 and Aadhaar Enrolment Client.
47) While installing aadhaar enrolment client getting an error
While installing Aadhaar Enrolment Client Database is not created hence getting the
attached error. Kindly contact Techsupport to fix this issue.
© UIDAI, 2010
Page 33 of 35
Version 1.1.0.2
Frequently Asked Questions
48) While logging into Aadhaar Enrolment Client getting an SQL time out error , seen
during client installation when tried to login?
First of all disable antivirus software and un-install Aadhaar Enrolment Client.
Once uninstalled restart the computer and then install Aadhaar Enrolment Client.
If still an issue Kindly contact Techsupport to fix this issue.
49) How to install L1 devices ?
Refer below attachment for installation guide :
05
L1_Biometric_Installation.docx
50) How to upgrade firmware on L1 devices ?
Kindly follow the steps below :
15
L-1_Firmware_Update_Doc.docx
51) How configure Google ime ?
Follow the below steps from the attached doc
06
AADHAAR_Googel_ime_configuration.docx
52) Find the list of known issues and work-arounds as listed below :
13
Known_Issues_with_Workaround.docx
© UIDAI, 2010
Page 34 of 35
Version 1.1.0.2
Frequently Asked Questions
5.
Aadhaar Enrolment Un-installation document
5.1
If the Bio-metric VDM’s are from Cross Match Technologies,
un-install as guided below :
•
•
•
Login to the machine with an account having administrative access.
Stop all the services as mentioned in the section “Verifying the Correct Installation
of Biometrics Components”
To un-install the application, go to “Control Panel -> Add/Remove Programs” and
remove the installed components in the following order:
• AADHAAR Enrolment Client – Windows
• VendorDeviceManager
• L SCAN Essentials 6.2.1.0 Runtime
• I SCAN Essentials 16.0.0.400 Runtime
• AADHAAR QSS SDK
5.2
•
•
•
If the Bio-metric VDM’s are from L1 Identity Devices, un-install
as guide below :
Login to the machine with an account having administrative access.
Stop all the services as mentioned in the section “Verifying the Correct Installation
of Biometrics Components”
To un-install the application, go to “Control Panel -> Add/Remove Programs” and
remove the installed components in the following order:
• AADHAAR Enrolment Client – Windows
• L1 Agile TP VDM for AADHAAR
• L1 ID MobileEyes VDM Service
• AADHAAR QSS SDK
o Please note that un-installation of the above components will not uninstall
any of the pre-requisites that would have been installed, viz. MICROSOFT SQL
SERVER 2008 R2 EXPRESS, .NET Framework 3.5 SP1, Windows Installer 4.5,
Windows Installer 3.1.
© UIDAI, 2010
Page 35 of 35