Alsident System®75 Product Information - AERO-BV

Transcription

SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
Product Information
SYSTEM 25
Alsident System®75
Aluminium
SYSTEM 100
System 75 - Aluminium - General Information
Product Specification
SYSTEM 25
Product Description
SYSTEM 50
SYSTEM 63
System 75 - Aluminium
SYSTEM 75 AL
The System 75 Aluminium Extraction Arm from ALSIDENT SYSTEM®
features a wide range of jointed extraction arms made of anodized
aluminium tubes with a diameter of 75 mm, joints of polypropylene
and internal components of stainless steel. The joints make the arm
easy to adjust and place in a working situation.
System 75 Extraction Arms are available in three models for mounting
on table, wall or ceiling. A wide range of hood designs allows this
arm to cover various needs.
An Extraction Arm from ALSIDENT SYSTEM® consists of three parts:
An extraction arm, a hood and a bracket. Each part must be ordered
separately.
Copyright©Alsident System®2005.
Right reserved for modification of design and measurements.
GB.11.2005
SYSTEM 100
The aluminium version of System 75 is suited for use in non-aggressive areas e.g. laboratories, hospitals, chemical industries, schools,
and pharmaceutical industries and is available in various lengths
with a maximum horizontal range of 1990 mm. Special length arms
are available on request.
75 AL
GI 01
Product Specification
SYSTEM 25
Technical Specifications
Recommended Airflow:
Normal:
Minimum:
Maximum:
Air Temperature:
-15˚C - +90˚C
Material:
Pipes:
Joints:
O-rings:
Mounting Flanges:
Damper:
Thumbscrew:
Threaded Stay:
Spring1):
Gas spring2):
140 m3/h
80 m3/h
180 m3/h
SYSTEM 50
Anodized Aluminium
Polypropylene (PP) - red or white
Polyethylene (PE)
Polypropylene (PP) - red or white
Polypropylene (PP)
Polypropylene (PP) - black
Stainless Steel (acid-proof )
Stainless Steel
Steel3)
Extraction arms with ranges up to 75-9065
Available on model 75-9090
3)
Also available in stainless steel on request
1)
SYSTEM 63
2)
SYSTEM 75 AL
Key to the signatures
SYSTEM NO.
75
VERSION
AL
Aluminium
CHAPTER
GI
TM
WM
CM
PAGE NO.
General Information
01
Table Mounted
Wall Mounted
Ceiling Mounted
SYSTEM 100
GB.11.2005
75 AL
GI 02
Product Overview
SYSTEM 25
Table mounted
Table mounted, 2-Joint
75
75
75
L
[mm]
B
[mm]
C
[mm]
Indicative
Weight [kg]
Part No.
550
650
750
350
450
550
450
450
450
1.5
2.0
2.3
75-35-1
75-45-1
75-55-1
Colour of joint
Red
White
-4
-4
-4
-5
-5
-5
SYSTEM 50
Diam.
[mm]
Table mounted, 3-Joint
SYSTEM 63
L
[mm]
A
[mm]
B
[mm]
75
75
75
75
830
1105
1290
1620
350
550
650
900
350
450
550
650
C
Indicative Part No.
[mm] Weight [kg]
450
450
450
450
1.9
2.5
2.7
3.0
75-3535-1
75-5545-1
75-6555-1
75-9065-1
Colour of joint
Red
White
-4
-4
-4
-4
-5
-5
-5
-5
SYSTEM 75 AL
Diam.
[mm]
SYSTEM 100
GB.11.2005
75 AL
GI 03
Product Overview
SYSTEM 25
Wall mounted and Ceiling mounted
Wall mounted, 3-Joint
L
[mm]
A
[mm]
B
[mm]
75
75
75
75
75
75
75
795
1200
1060
1230
1550
1730
1990
350
350
550
650
900
900
900
350
900
450
550
650
900
900
C
Indicative Part No.
[mm] Weight [kg]
450
450
450
450
450
450
450
2.0
2.3
2.6
2.8
3.1
3.6
3.8
Colour of joint
Red White
75-3535-2
75-3590-2
75-5545-2
75-6555-2
75-9065-2
75-9090-2
75-9090-2-22*
-4
-4
-4
-4
-4
-4
-4
-5
-5
-5
-5
-5
-5
-5
SYSTEM 50
Diam.
[mm]
*) With 2 external gas springs
SYSTEM 63
Ceiling mounted, 3-Joint
L
[mm]
A
[mm]
B
[mm]
75
75
75
75
75
75
75
795
1200
1060
1230
1550
1730
1990
350
350
550
650
900
900
900
350
900
450
550
650
900
900
C
Indicative Part No.
[mm] Weight [kg]
450
450
450
450
450
450
450
2.0
2.3
2.6
2.8
3.1
3.6
3.8
Colour of joint
Red White
75-3535-3
75-3590-3
75-5545-3
75-6555-3
75-9065-3
75-9090-3
75-9090-3-22*
-4
-4
-4
-4
-4
-4
-4
-5
-5
-5
-5
-5
-5
-5
SYSTEM 75 AL
Diam.
[mm]
*) With 2 external gas springs
SYSTEM 100
GB.11.2005
75 AL
GI 04
Accessories Overview
Metal Hood (diam. 200 mm)
Part No.: 1-7524-4 /-5
Metal hood made of white or red powder
coated aluminium. Recommended when
extracting hot gases, fumes, light dust concentrations etc.
SYSTEM 25
Hoods
Material
Metal hood:
Aluminium (powder coated)
Flange:
Polypropylene (PP)
Connection tube: Aluminium (Anodized)
Red
-4
SYSTEM 50
Part No.
1-7524
White
-5
Metal Hood (diam. 200 mm)
Part No.: 1-7524
Made of anodized aluminium with an aluminium flange. Recommended when extracting
hot gases, fumes, light dust concentrations
etc. Suitable for autoclaving.
Suction Nozzle
SYSTEM 63
Material
Metal Hood:
Aluminium (Anodized)
Flange:
Part Nos.: 1-7525-4 /-5
SYSTEM 75 AL
Made of anodized aluminium and white or
red polypropylene (PP). Recommended for
concentrated sources of pollution. Often used
at soldering processes.
Material
Hood:
Aluminium (Anodized) and
Polypropylene (PP)
Flange:
Polypropylene (PP)
Part No.
1-7525
Red
-4
White
-5
SYSTEM 100
GB.11.2005
75 AL
GI 05
Extractor Tube - Aluminium
Part No.: 1-7525
Recommended for small concentrated sources
of pollution. Efficient as it gets close to the
source without obstructing the work process.
Material
Tube:
SYSTEM 25
Hoods
SYSTEM 50
Extractor Tube - Alu + Polypropylene (PP)
Part Nos.: 1-7526-4 /-5
Recommended for small concentrated sources
of pollution. Efficient as it gets close to the
Part No.
1-7526
Polypropylene (PP)
Red
-4
SYSTEM 63
Material
Tube:
Tip:
White
-5
Dome Hood (diam. 280 mm)
Part No.: 1-7528-4 /-5
SYSTEM 75 AL
Recommended for light fumes, gases and
small open vessels. The transparent hood
assists in keeping a good view of the workpiece.
Material
Hood:
Flange:
Connection tube*:
PETG
Polypropylene (PP)
*) Separately enclosed at delivery.
Part No.
1-7528
Red
-4
White
-5
SYSTEM 100
GB.11.2005
75 AL
GI 06
Dome Hood (diam. 385 mm)
Part No.: 1-7535-4 /-5
Recommended for light fumes, gases and
open vessels. The transparent hood assists in
keeping a good view of the workpiece.
Material
Hood:
Flange:
Connection tube*:
SYSTEM 25
Hoods
PETG
Polypropylene (PP)
Red
-4
SYSTEM 50
Part No.
1-7535
White
-5
Flat Screen (330 x 240 mm)
Part Nos.: 1-753324-4 /-5
SYSTEM 63
Recommended when extracting heavy gases
and fumes. High efficiency when placed vertically on a surface e.g. a table. Gets close to the
Material
Hood:
PETG
Flange:
Polypropylene (PP)
Connection tube*: Aluminium (Anodized)
Part No.
1-753324
Red
-4
White
-5
Part No.: 1-754232-4 /-5
Recommended for both light and heavy
fumes, gases and open vessels. The transparent hood assists in keeping a good view
of the workpiece. Good efficiency when placed vertically on a surface e.g. a table.
Material
Hood:
Flange:
Connection tube*:
SYSTEM 75 AL
Square Hood (420 x 320 mm)
PETG
Polypropylene (PP)
Red
-4
White
-5
SYSTEM 100
Part No.
1-754232
GB.11.2005
75 AL
GI 07
Wall Bracket
Part No.: 2-7525
Used for System 75 Wall Mounted Extraction
Arms. Wall bracket made of white powder
coated steel.
Other colours available on request.
SYSTEM 25
Brackets and Columns
SYSTEM 50
Table Bracket
Part No.: 2-7510
Used to mount System 75 Table Mounted
Extraction Arms on table side which makes
it removable for mobile installations. Made of white powder coated steel.
SYSTEM 63
Part No.: 4-10075 / 4-8075
Used to connect System 75 Extraction Arms
to duct.
Made of white polypropylene (PP).
Available in two sizes.
Reducing from/to [mm]
80/75
100/75
SYSTEM 75 AL
Reducers
Part No.
4-8075
4-10075
SYSTEM 100
GB.11.2005
75 AL
GI 08
SYSTEM 25
Brackets and Columns
Ceiling Columns
Used for mounting the System 75 Ceiling
Mounted Extraction Arms. The ceiling column is made of white powder coated steel.
Available in two models with side connection or top connection to duct.
Standard lengths see below.
Available in other lengths and colours on
request.
SYSTEM 50
Connection Diameter: 80 mm.
Length [mm]
250
500
750
1000
Ind. Weigth [kg]
2.0
3.0
3.8
4.5
Top Conn.
2-250-20
2-500-20
2-750-20
2-1000-20
Side Conn.
2-500-80
2-750-80
2-1000-80
SYSTEM 63
Extensions for Ceiling Column
Mounted on ceiling. Used to extend Ceiling
Column in rooms with high ceilings. The Extension is made of white powder coated steel.
Available in two standard lengths with side or
top connection for duct.
Other lengths and colours available on
request.
Length [mm] Ind.Weight [kg]
500
9.5
750
14.0
1000
18.0
Top Conn.
2-500-21-20
2-750-21-20
2-1000-21-20
Side Conn.
2-500-21-80
2-750-21-80
2-1000-21-80
SYSTEM 75 AL
Connection Diameter: 80 mm.
SYSTEM 100
GB.11.2005
75 AL
GI 09
Technical Description
SYSTEM 25
D
C
Pressure Drop Chart
Sy
ystem 75, Table mounted
System 75, Wall and Ceiling mounted
S
D
SYSTEM 63
C
SYSTEM 50
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
GI 10
Spare Parts List
SYSTEM 25
Joint with Damper
Joint with Damper
4-75-4 /-5
5
6 7
2
4
1 7 8 4 5
SYSTEM 50
9.1
3 9
Pos.
SYSTEM 63
A
Product No.
4-75-4 /-5
Pos.
Part No.
Red
1
2
4-7512
4-755-0
-4
-4
3
4
White
A
Joint, 12 mm
Joint, 5 mm
1
1
5-100-6
5-75
O-ring
Teflon Washer
1
2
5
6
5-75-5
5-75-5-221
Thumbscrew, 5 mm
Threaded Stay
2
1
7
8
5-75-4
5-5075
Thumbscrew, 4 mm
Wing for damper
2
1
800-4-75
5-12-411
Damper
Seegerring
1
1
9
9.1
-5
-5
[pieces applied]
SYSTEM 75 AL
Description
SYSTEM 100
GB.11.2005
75 AL
GI 11
System 75 - Aluminium - Table Mounted
Working Area
SYSTEM 25
Table mounted with Extractor Tube
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
GB.11.2005
75 AL
TM 01
SYSTEM 100
Note:
Working area of the arm is defined from the center of the opening of the accessory.
When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest
or lowest part of the working area.
(All measurements in mm)
Mounting Options
SYSTEM 25
Table Mounted Option
Directly on Table.
Socket pipe of a System 75 Extraction Arm mounted directly on table with
flange screwed to table plate.
Accessories:
No brackets used.
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
TM 02
Mounting Options
SYSTEM 25
Table Mounted Option with Table Bracket
With table bracket.
Socket pipe of a System 75 Extraction Arm mounted on table side with a table
bracket. Very functional option when impossible to mount directly on table or when
a mobile installation is required.
Accessories:
Table Bracket, Part No. : 2-7510
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
TM 03
Table Bracket
SYSTEM 25
Part No.: 2-7510
Used to mount System 75 Table Mounted Arms on table side.
Removable for mobile installations. Made of white powder
coated steel.
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
TM 04
Spare Parts
(B) 75-45-1
SYSTEM 25
(A) 75-35-1
(C) 75-55-1
6 7 10
3 4
5
(D) 75-3535-1
(E) 75-5545-1
(F) 75-6555-1
9
SYSTEM 50
1
76
(G) 75-9065-1
3 8
6 7 10
5 7 6
6 7 4
SYSTEM 63
1 3 2
5 7 6 9
For spare parts list - see next page.
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
TM 05
Spare Parts List
A
B
C
D
E
F
G
Red
White
Joints
75-35-1
75-45-1
75-55-1
75-3535-1
75-5545-1
75-6555-1
75-9065-1
-4
-4
-4
-4
-4
-4
-4
-5
-5
-5
-5
-5
-5
-5
2-joint
2-joint
2-joint
3-joint
3-joint
3-joint
3-joint
Part No.
Description
A
B
C
D
E
F
G
1
1
1
1
1
1
1
1
[pieces applied]
1
1
1
[pieces applied]
1
1
1
1
1
2
1
1
2
1
1
1
2
2
1
2
2
2
1
2
1
2
2
1
2
4
4
1
2
4
4
2
4
4
1
2
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
75-55-1-5 (white)
B-pipe 550
3-7555-9-5
1 pc.
If you wish to customize the arm with a spare part which
is not a constituent part of the particular model, please
contact your Alsident dealer.
GB.11.2005
75 AL
TM 06
SYSTEM 100
eg.:
-
SYSTEM 75 AL
1
1
When ordering spare parts please quote:
Product No.
Description
Part No.
Quantity
SYSTEM 63
1
3-7540-1-4 /-5
C-pipe BM 400
2
5-75-2-4-01
Spring 4 mm (2 joint)
2
5-75-3-4-01
Spring 4 mm
2
5-75-3-5-01
Spring 5 mm
2
5-75-3-6-01
Spring 6 mm
3
5-100-6
O-ring
4
3-7535-9-4 /-5
B-pipe 350
4
3-7545-9-4 /-5
B-pipe 450
4
3-7555-9-4 /-5
B-pipe 550
4
3-7565-9-4 /-5
B-pipe 650
5
5-75-5-211
Threaded Stay
6
5-75-5
Thumbscrew
7
5-75
Teflon Washer
8
3-7535-8-4 /-5
A-pipe 350
8
3-7555-8-4 /-5
A-pipe 550
8
3-7565-8-4 /-5
A-pipe 650
8
3-7590-8-4 /-5
A-pipe 900
9
4-75-4 /-5
Joint with damper*
10
4-755-4 /-5
Joint 5 mm
*) Spare Parts List for Joint with Damper - see General Information.
SYSTEM 50
Pos.
Product No.
SYSTEM 25
Pos.
Mounting Instruction
SYSTEM 25
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
TM 07
System 75- Aluminium - Wall Mounted
Working Area
SYSTEM 25
Wall Mounted with Extractor Tube
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
GB.11.2005
75 AL
WM 01
SYSTEM 100
Note:
When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest
or lowest part of the working area.
Mounting Options
SYSTEM 25
Wall Mounted Option
Wall Mounted
System 75 Extraction Arm - wall mounted with Wall Bracket.
Accessories:
Wall Bracket, Part No.: 2-7525
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
WM 02
Wall Bracket
SYSTEM 25
Part No.: 2-7525
Used for System 75 Wall Mounted Extraction Arms.
Wall bracket made of white powder coated steel.
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
WM 03
Spare Parts
(D) 75-6555-2 (E) 75-9065-2 (E) 75-9090-2
78
7
SYSTEM 25
(A) 75-3535-2 (B) 75-3590-2 (C) 75-5545-2
5 4 10
8
6 8 9 8 6 7
7
SYSTEM 50
1 2 4
(G) 75-9090-2-22
10 5 7 8
4
9
6 8 7
SYSTEM 63
3 3 7 8 1 4
6a 6a 6 8 7
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
WM 04
Spare Parts List
Product No.
Red
White
Joints
A
B
C
D
E
F
G
75-3535-2
75-3590-2
75-5545-2
75-6555-2
75-9065-2
75-9090-2
75-9090-2-22
-4
-4
-4
-4
-4
-4
-4
-5
-5
-5
-5
-5
-5
-5
3-joint
3-joint
3-joint
3-joint
3-joint
3-joint
3-joint
Part No.
Description
A
B
C
D
E
F
G
1
1
1
1
1
1
1
1
1
1
[pieces applied]
1
2
2
C-pipe HM 400
Spring HM/HMS 4 mm
Spring HM/HMS 4.5 mm
Spring HM/HMS 5 mm
Spring HM/HMS 6 mm
Spring BM 4 mm 2-joints
Gas Spring 100N Push
Gas Spring 200N Pull
O-ring
B-pipe 350
B-pipe 450
B-pipe 550
B-pipe 650
B-pipe 900
B-pipe 900 gas spring
Threaded Stay
Threaded Stay M5/M8
Thumbscrew
[pieces applied]
6a
7
3-7540-2-4 /-5
5-75-3-4-00
5-50-3-4,5-03
5-75-3-5-00
5-75-3-6-00
5-75-2-4-01
800-100-100-1-050
800-100-200-2-050
5-100-6
3-7535-9-4 /-5
3-7545-9-4 /-5
3-7555-9-4 /-5
3-7565-9-4 /-5
3-7590-9-4 /-5
3-7590-0-9-4 /-5
5-75-5-211
5-75-8-112
5-75-5
8
9
9
9
9
9
5-75
3-7535-8-4 /-5
3-7555-8-4 /-5
3-7565-8-4 /-5
3-7590-8-4 /-5
3-7590-0-8-4 /-5
10
4-75-4 /-5
2
2
2
4
5
5
5
5
5
5
6
1
1
1
1
2
1
2
2
2
2
2
2
1
1
SYSTEM 63
3
3
1
1
SYSTEM 50
Pos.
SYSTEM 25
Pos.
1
1
1
2
2
2
2
2
4
4
4
4
4
4
Washer
A-pipe 350
A-pipe 550
A-pipe 650
A-pipe 900
A-pipe 900 gas spring
4
1
4
1
4
4
4
4
4
1
1
Joint with damper*
1
1
1
1
1
1
1
1
1
SYSTEM 75 AL
2
1
2
2
4
1
Product No.
Description
Part No.
Quantity
eg.:
-
75-5545-2-5 (white)
B-pipe 450
3-7545-9-5
1 pc.
GB.11.2005
75 AL
WM 05
SYSTEM 100
SYSTEM 25
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
WM 06
System 75 - Aluminium - Ceiling Mounted
Working Area
SYSTEM 25
Ceiling Mounted with Extractor Tube
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
N.B: When using the top part of the motion
area be aware of the locationof the ceiling
and the length of the ceiling column.
GB.11.2005
75 AL
SYSTEM 100
Note:
When choosing the arm we recommend that the stationary working position of the accessory is not placed in
the highest or lowest part of the working area.
CM 01
Mounting Options
SYSTEM 25
Ceiling Mounted Option
A System 75 Extraction Arm ceiling mounted with ceiling column.
Connection for ducting at the side or top.
Accessories:
Ceiling Column, Part No. depending on lengths.
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
CM 02
Ceiling Column
SYSTEM 25
Ceiling Columns
Used for mounting the System 75 Ceiling Mounted Extraction Arms.
The ceiling column is made of white powder coated steel. Available in
two models with side connection or top connection to duct.
Standarad lengths see below.
Available in other lengths and colours on request.
Ind. Weigth [kg]
2.0
3.0
3.8
4.5
Top Conn.
2-250-20
2-500-20
2-750-20
2-1000-20
Side Conn.
2-500-80
2-750-80
2-1000-80
SYSTEM 50
Length [mm]
250
500
750
1000
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
CM 03
Ceiling Column
SYSTEM 25
Extensions for Ceiling Column
Mounted on ceiling. For extending ceiling column in rooms with
high ceilings. The extension for ceiling column is made of white
powder coated steel.
For standard lengths see below. Available in other lengths and
colours on request.
Side Conn.
2-500-21-80
2-750-21-80
2-1000-21-80
SYSTEM 50
Length [mm] Ind.Weight [kg] Top Conn.
500
9.5
2-500-21-20
750
14.0
2-750-21-20
1000
18.0
2-1000-21-20
Dimensions
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
CM 04
Spare Parts
(D) 75-6555-3 (E) 75-9065-3 (E) 75-9090-3
7
5 4
8
1 2 4
6 9 10
8
6 8 7
7
SYSTEM 50
7 8
SYSTEM 25
(A) 75-3535-3 (B) 75-3590-3 (C) 75-5545-3
(G) 75-9090-3-22
10 5 7
6 8 7
4 9
SYSTEM 63
3 3 7 8 1 4
6.a 6.a 6 8 7
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
CM 05
Spare Parts List
Product No.
Red
White
Joints
A
B
C
D
E
F
G
75-3535-3
75-3590-3
75-5545-3
75-6555-3
75-9065-3
75-9090-3
75-9090-3-22
-4
-4
-4
-4
-4
-4
-4
-5
-5
-5
-5
-5
-5
-5
3-joint
3-joint
3-joint
3-joint
3-joint
3-joint
3-joint
Part No.
Description
A
B
C
D
E
F
G
1
1
1
1
1
1
1
1
1
1
SYSTEM 50
Pos.
SYSTEM 25
Pos.
[pieces applied]
1
2
2
8
9
9
9
9
9
5-75
3-7535-8-4 /-5
3-7555-8-4 /-5
3-7565-8-4 /-5
3-7590-8-4 /-5
3-7590-0-8-4 /-5
10
4-75-4 /-5
2
2
2
3
3
4
5
5
5
5
5
5
6
1
1
1
1
1
1
2
1
2
2
2
2
2
2
1
1
1
1
1
2
2
2
2
2
2
4
4
4
4
4
4
1
2
2
4
Washer
A-pipe 350
A-pipe 550
A-pipe 650
A-pipe 900
A-pipe 900 gas spring
4
1
4
1
4
4
4
4
4
1
1
Joint with damper*
1
1
1
SYSTEM 75 AL
C-pipe HMS 400
Spring HM/HMS 4 mm
Spring HM/HMS 4.5 mm
Spring HM/HMS 5 mm
Spring HM/HMS 6 mm
Spring BM 4 mm 2-joints
Gas Spring 100N
Gas Spring 200N
O-ring
B-pipe 350
B-pipe 450
B-pipe 550
B-pipe 650
B-pipe 900
B-pipe 900 gas spring
Threaded Stay
Threaded Stay M5/M8
Thumbscrew
SYSTEM 63
6a
7
3-7540-3-4 /-5
5-75-3-4-00
5-50-3-4,5-03
5-75-3-5-00
5-75-3-6-00
5-75-2-4-01
800-100-100-1-050
800-100-200-2-050
5-100-6
3-7535-9-4 /-5
3-7545-9-4 /-5
3-7555-9-4 /-5
3-7565-9-4 /-5
3-7590-9-4 /-5
3-7590-0-9-4 /-5
5-75-5-211
5-75-8-112
5-75-5
1
1
1
1
1
1
1
Product No.
Description
Part No.
Quantity
eg.:
-
75-3535-3-5 (white)
A-pipe 350
3-7535-8-5
1 pc.
GB.11.2005
75 AL
CM 06
SYSTEM 100
SYSTEM 25
SYSTEM 50
SYSTEM 63
SYSTEM 75 AL
SYSTEM 100
GB.11.2005
75 AL
CM 07

Alsident System®75 Product Information - AERO-BV

Transcription

Similar documents

Alsident System®50 Product Information - AERO-BV

Alsident® System 75 Telescopic Product Information

Alsident System®100 Product Information - AERO-BV

Alsident® System 100 Product Information