Alsident® System 75 Telescopic Product Information

Transcription

SYSTEM 50
SYSTEM 63
SYSTEM
SYSTEM
75 75
TELESKOP
TELE
Product Information
SYSTEM 25
Alsident® System 75 Telescopic
Aluminium (AL)
SYSTEM 100
System 75 Telescopic – General Information
Product Specification
SYSTEM 25
Product Description
SYSTEM 50
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
System 75 Telescopic – Aluminium
The System 75 Telescopic Extraction Arm is delivered with anodized
aluminium tubes and flexible joints in white polypropylene (PP). The
internal parts are made of acid-proof stainless steel (AISI 316L). The
flexible joints and the telescopic effect make the arm easy to position,
and after use, the arm is easily pushed upwards and aside.
System 75 Telescopic is available in two versions for mounting on
wall or ceiling. A wide range of hood designs allows this arm to cover
various needs.
An extraction arm from ALSIDENT SYSTEM® consists of three parts:
An extraction arm, a hood and a bracket. Each part must be ordered
separately.
SYSTEM 100
Copyright©Alsident® System 2014.
Right reserved for modification of design and measurements.
UK.08.2014
75 Tele
GI 01
Product Specification
SYSTEM 25
Technical Specifications
Normal:
140 m3/h
Minimum:
80 m3/h
Maximum:
180 m3/h
Air temperature:
-15˚C - +90˚C
Material:
Pipes:
Anodised Aluminium (10 µ)
Joints:
Polypropylene (PP) - white
O-ring:
Polyethylene (PE) / Polypropylene (PP)
Flange:
Polypropylene (PP) - white
Damper:
Polyethylene (PE) - white
Thumbscrew:
Polypropylene (PP) - black
Threaded stay:
Acid-proof stainless steel (AISI 316L)
Spring:
Acid-proof stainless steel (AISI 316L)
SYSTEM 50
Recommended Airflow:
Abbr.:
PP:Polypropylene
Shatterproof and chemical resistant
PE:Polyethylene
SYSTEM 63
PETG:
Polyethylene Therephthalat, Glycol-modified
Transparent and resistant to solvents
Local Extraction for workplaces incl. all materials for mounting.
All components RoHS-compatible according to the directive 2002/95/El
Technical Reports
Capture Efficiency (Danish Technological Institute)
Downlod from www.alsident.com > Technical Support > Test Report
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Reports:
Key to the signatures
SYSTEM NO.
75 Tele
VERSION
AL
CHAPTER
Aluminium
GI
01
General Information
SYSTEM 100
WCM
PAGE NO.
Wall/Ceiling Mounted
UK.08.2014
75 Tele
GI 02
Product Overview
SYSTEM 25
Wall and Ceiling Mounted
Wall and Ceiling Mounted (WCM)
L
[mm]
A
[mm]
B
[mm]
C
[mm]
Weight
app. [kg]
75/100
950-1300
645
465
646
4.3
900-1300-3
75/100
1300-1900
985
715
646
4.8
900-1900-3
Part No.
SYSTEM 50
Dia.
[mm]
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
SYSTEM 100
UK.08.2014
75 Tele
GI 03
Accessories Overview
Part No.: 1-7524-5
Metal Hood made of white powder coated aluminium.
Recommended when extracting hot gases, fumes,
light dust concentrations etc.
Material
Metal Hood:
Flange:
Connection tube:
SYSTEM 25
Metal Hood (Dia. 200 mm)
Aluminium (powder coated)
Polypropylene (PP)
Aluminium (anodized)
SYSTEM 50
Metal Hood (Dia. 200 mm)
Part No.: 1-7524
Metal hood made of anodized aluminium with an
anodized aluminium flange. Recommended when
extracting hot gases, fumes, light dust concentrations
etc. Suited for autoclave.
Part No.: 1-7525-5
Made of anodized aluminium and white polypropylene (PP). Recommended for concentrated
sources of pollution. Often used at soldering
processes.
Material
Suction Nozzle:
Flange:
Connection tube:
Aluminium (anodized) and
Polypropylene (PP)
Polypropylene (PP)
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Suction Nozzle
SYSTEM 63
Material
Metal Hood:
Flange:
Connection tube:
SYSTEM 100
UK.08.2014
75 Tele
GI 04
Part No.: 1-7525
Recommended for small concentrated sources of
pollution. Efficient as it gets close to the source
without obstructing the work process.
Material
Pipes:
SYSTEM 25
Suction pen – Aluminium
SYSTEM 50
Suction pen – Alu + Polypropylene (PP)
Part No.: 1-7526-5
Recommended for small concentrated sources of
pollution. Efficient as it gets close to the source
without obstructing the work process.
Polypropylene (PP)
Part No.: 1-7528-5
Recommended for light fumes, gases and small open
vessels. The transparent hood assists in keeping a
good view of the work piece.
Material
Hood:PETG
Flange:
Polypropylene (PP)
Connection tube1:
1) Separately enclosed at delivery.
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Hood (Dia. 280 mm)
SYSTEM 63
Material
Pipes:
Tip:
SYSTEM 100
UK.08.2014
75 Tele
GI 05
Part No.: 1-7535-4 /-5
Recommended for light fumes, gases and small open
vessels. The transparent hood assists in iiistability due
to reinforced rim of the hood. Increased efficiency at an
angled position.
SYSTEM 25
Dome Hood (diam. 385 mm)
Material
Hood:PETG
Flange:
Polypropylene (PP)
Connection tube1: Aluminium (anodized – 10 µ)
1) Separately enclosed at delivery
Red
White
1-7535
-4
-5
Flat Hood (330 x 240 mm)
Part No.: 1-753324-4 /-5
SYSTEM 50
Part No.
Recommended when extracting heavy gases and
fumes. High efficiency when placed vertically on a
surface e.g. a table. Practical rim for easy positioning of
the hood. Gets close to the source without obstructing
the work process.
SYSTEM 63
Material
Hood:PETG
Flange:
Polypropylene (PP)
Part No.
Red
White
1-753324
-4
-5
Square Hood (420 x 320 mm)
Part No.: 1-754232-4 /-5
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Recommended for both light and heavy fumes, gases
and for open vessels, as this hood is suited for horizontal position above and vertical position behind
the source of pollution. Good efficiency when placed
vertically on a surface e.g. a table. Increased stability
due to reinforced rim of the hood. The transparent
hood assists in keeping a good view of the workpiece.
Material
Hood:PETG
Flange:
Polypropylene (PP)
Part No.
Red
White
1-754232
-4
-5
Protective Grill (for hoods)
Part No.: 5-17
Protective Grill for mounting in hood.
Prevents extraction of foreign materials.
SYSTEM 100
Material: Polypropylene (PP)
Colour: White
UK.08.2014
75 Tele
GI 06
Part Nos.: 2-100-203
Used for wall mounting of System 75 Telescopic Extraction Arm.
The square wall bracket is made of steel with white polyester powder
coated surface.
SYSTEM 25
Square Wall Bracket
Other colours availale on request.
Connect to duct (125 mm dia.) wit the enclosed reducer.
SYSTEM 50
Reducer
Part No.: 4-100125
Used to connect System 75 Telescopic wall mounted arms to duct.
Made of white polypropylene (PP).
Reduces from 125 to 100mm.
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
SYSTEM 100
UK.08.2014
75 Tele
GI 07
SYSTEM 25
Brackets and Columns
Ceiling Columns
Used for mounting the System 75 Telescopic Ceiling Mounted Extraction
Arms. The ceiling column is made of white polyester powder coated
steel.
Available in two models with top connection or side connection to duct.
Standard lengths see below.
Other lengths, colours and acid-proof stainless steel (AISI 316L) available
on request.
Connection diameter: 125 mm
Top connection
Side connection
4.0
2-100-500-20
2-100-500-80
750
5.5
2-100-750-20
2-100-750-80
1000
6.5
2-100-1000-20
2-100-1000-80
1250
8.0
2-100-1250-20
2-100-1250-80
1500
9.0
2-100-1500-20
2-100-1500-80
1750
10.5
2-100-1750-20
2-100-1750-80
2000
11.5
2-100-2000-20
2-100-2000-80
2500
13.0
2-100-2500-20*
2-100-2500-80*
*) Available on request
Support Bracket for long ceiling column
Part No.: 2-100-5
For support with wire to check or by fastening to ceiling rail
system.
The support bracket is made of steel with a white polyester
powder-coating. Other colours available on request.
Dimensions
Internal: 150 x 150 mm
External: 250 x 250 mm
Part No.: 4-250-250
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
For extra support of long ceiling columns.
Cover Flange
SYSTEM 63
Weight app. [kg]
500
SYSTEM 50
Length [mm]
Made to cover the perforation through a concealed ceiling. To be
glued on to the concealed ceiling around the ceiling column.
SYSTEM 100
Dimensions
Internal: 150 x 150 mm
External: 250 x 250 mm
UK.08.2014
75 Tele
GI 08
Technical Description
SYSTEM 25
Pressure Drop Chart
Tested by Danish Technological Institute
SYSTEM 50
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
SYSTEM 100
UK.08.2014
75 Tele
GI 09
Spare Parts List
Joint with Damper
4-75-5
5
6 2.1
SYSTEM 25
Joint with Damper
2
4
1 1.2 1.3 1.1 5
SYSTEM 50
1.5
3 1.4
Product no.
A
4-75-5
Pos.
1
SYSTEM 63
Pos.
Spare part No.
Description
A[pieces[pieces
applied]
applied]
Joint, 12 mm
1
5-75
Teflon Washer
1
1.2
5-75-4
Thumbscrew, 4 mm
1
1.3
5-5075
Wing for Damper
1
1.4
800-4-75
Damper
1
1.5
5-12-411
Seegerring
1
4-755-0
Joint, 5 mm
1
5-75-4
Thumbscrew, 4 mm
1
3
5-100-6
O-Ring
1
4
5-75
Teflon Washer
1
5
5-75-5
Thumbscrew, 5 mm
2
6
5-75-5-221
Threaded Stay
1
2
2.1
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
4-7512
1.1
When ordering spare parts pos. 1 or 2 the underlying spare parts (1.1 - 1.5 or 2.1) are included.
SYSTEM 100
UK.08.2014
75 Tele
GI 10
System 75 Telescopic – Wall/Ceiling Mounted (WCM)
Working Area
SYSTEM 25
Wall mounted with Suction pen
SYSTEM 50
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Accessory: Suction pen no. 1-7525
SYSTEM 100
Note:
The working area of the arm is defined from the center of the opening of the accessory.
The working area changes according to type of accessory and positioning.
When chosing the arm we recommend that the stationary working position of the accessory
is not placed in the highest or lowest part of the working area.
(All measurements in mm)
UK.08.2014
75 Tele
WCM
GI 01
01
Mounting Options
SYSTEM 25
Wall mounted Option
Wall Mounted
System 75 Telescopic arm – wall mounted in System 100 square wall bracket.
Accessories:
Square wall bracket, Part No.: 2-100-203
SYSTEM 50
em 75 Telescopic
DimensionsWall Mounted
Wall Mounting
SYSTEM 63
230
573
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
343
MOUNTING
INSTRUCTION
UK.08.2014
75 Tele
WCM
GI 02
02
SYSTEM 100
On-line video or pdf
www.alsident.com
Square Wall Bracket
SYSTEM 25
Part Nos.: 2-100-203
Used for wall mounting of System 75 Telescopic Extraction Arm.
The square wall bracket is made of steel with white polyester
powder coated surface.
Other colours availale on request.
Connect to duct (125 mm dia.) wit the enclosed reducer.
SYSTEM 50
Dimensions
SYSTEM 63
203
230
305
260
280
110
130
SYSTEM 100
alsident
system a/s
COPYRIGHT
2013
ALL RIGHTS RESERVED
Draw: HM/(40) 100
003-2
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
150 x 150
UK.08.2014
75 Tele
WCM
GI 03
03
Working Area
SYSTEM 25
Ceiling mounted with Suction pen
SYSTEM 50
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
Accessory: Suction pen No. 1-7525
SYSTEM 100
Note:
The working area of the arm is defined from the center of the opening of the accessory.
The working area changes according to type of accessory and positioning.
When chosing the arm we recommend that the stationary working position of the accessory
is not placed in the highest or lowest part of the working area.
UK.08.2014
75 Tele
WCM
GI 04
04
Mounting Options
SYSTEM 25
Ceiling Mounted Option
Ceiling Mounting
System 75 Telescopic arm in System 100 ceiling column.
Accessory:
Ceiling column
Part no. depending on length
SYSTEM 50
Dimensions
SYSTEM 63
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
MOUNTING
INSTRUCTION
On-line video or pdf
www.alsident.com
SYSTEM 100
UK.08.2014
75 Tele
WCM
GI 05
05
Ceiling Column
SYSTEM 25
Ceiling Columns
Used for mounting the System 75 Telescopic ceiling mounted extraction arms.
The ceiling column is made of steel with a white polyester powder coating.
Available in two models with top connection or side connection to duct.
For standard lengths see below.
Other lengths, colours and acid-proof stainless steel (AISI 316L) available
on request.
Connection diameter: 125 mm
Top connection
Side connection
500
4.0
2-100-500-20
2-100-500-80
750
5.5
2-100-750-20
2-100-750-80
1000
6.5
2-100-1000-20
2-100-1000-80
1250
8.0
2-100-1250-20
2-100-1250-80
1500
9.0
2-100-1500-20
2-100-1500-80
1750
10.5
2-100-1750-20
2-100-1750-80
2000
11.5
2-100-2000-20
2-100-2000-80
2500
13.0
2-100-2500-20*
2-100-2500-80*
*) Available on request
Dimensions
SYSTEM 63
Weight app. [kg]
SYSTEM 50
Length [mm]
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
SYSTEM 100
UK.08.2014
75 Tele
WCM
GI 06
06
Spare Parts List
SYSTEM 25
Ceiling Mounted
4
1
2
3
6
5
10
Pos.
Product No.
AA
900-1300-3
BB
900-1900-3
8
Part No.
Description
1
3-10044-0-3-5
C-pipe CM 440, short
2
5-75-2-6-00
Spring WCM 6 mm (2 joints)
3
5-133-10-5
O-ring 100
1
4
5-100-268
Threaded stay
1
4
5-100-8-268
Threaded stay, 8 mm
5
5-100-5
Thumbscrew, 100
1
1
6
800-7-5,2-18
Washer
1
1
7
3-10058-5
A-pipe, short
1
7
3-100105-5
A-pipe, long
8
7-5-30
Thumbscrew
1
9
3-7565-5
B-pipe, short
1
9
3-7590-5
B-pipe, long
10
4-75-5
Joint with Damper* [pieces applied]
A
B
1
1
1
1
1
1
1
1
1
Product no.
Description
Part No.
Quantity
eg.
-
-
-
900-1300-3
C-pipe, CM 580, short
3-10058-0-3-5
1 pc.
If you wish to customize the arm with a spare part which is not a
constituent part of the particular model, please contact your Alsident
dealer. UK.08.2014
75 Tele
WCM
GI 07
07
SYSTEM 100
When ordering spare parts please quote:
SYSTEM
SYSTEM75
75TELESCOPIC
TELESKOP
1
*) Spare Parts LIst for joint with damper – see General Information
SYSTEM 63
Pos.
7
SYSTEM 50
9

Alsident® System 75 Telescopic Product Information

Transcription

Similar documents

Alsident System®50 Product Information - AERO-BV

Alsident System®75 Product Information - AERO-BV

Alsident® System 100 Product Information

Alsident System®100 Product Information - AERO-BV