SIGN HOLDERS

Transcription

SIGN HOLDERS

Volume 1
DISPLAY BUYERS GUIDE
Visit us at www.beemak.com to place your order today
SIGN HOLDERS |
Hinged
Hinged
1
For Shelving with Price Channels
102-050
1/2" Long
InstaGrip Ticket Rail
Sign Holder
Co-extruded clear PVC.
Accepts material up to .065" thick.
Fits 1-1/4" price channels.
Packed: 500
102-100
1" Long
Sign Holder
Packed: 250
102L-100
1" Long
Sign Holder
Packed: 100
107-250
2-1/2" Long
InstaGrip Label/Sign Holder
Combined
Holds barcode labels and feature
cards at the same time.
Packed: 100
107F-100
1" Long
InstaGrip Hinged Label/
Sign Holder
Flip-up to scan label underneath.
Packed: 250
107F-250
2-1/2" Long
InstaGrip Hinged Label/
Sign Holder
Flip-up to scan label underneath.
Packed: 100
Flip up to scan
SIGN HOLDERS |
104-075
InstaGrip Ticket Rail Flag
Sign Holder
Packed: 250
104L-100
InstaGrip Ticket Rail Flag
Sign Holder
Packed: 250
204-075
InstaGrip 2-Way Ticket
Rail Flag Sign Holder
Packed: 250
2535
InstaHold Price Channel
Sign Holder
Natural polypropylene.
Pierces lightweight signs and
snaps closed for secure grip.
Fits standard 1-1/4" channels.
Packed: 250
Locks your message into place – perfect for low
temperature areas where adhesive products fail!
2536
InstaHold Price Channel
90° Sign Holder
Pierces lightweight signs and
snaps closed for secure grip.
Fits 1-1/4" channel – holds sign
at right angle to shelf.
Packed: 250
2435
Insta-Clip
White acetal.
Holds sign two ways.
Packed: 250
Flush
Right Angle
2435-PL
Econo Insta-Clip
Holds sign two ways.
Packed: 250
2495-M
Metal Insta-Clip
Stainless steel.
Provides super holding power for
coated or plastic signs.
Packed: 250
toll free: 800.421.4393 | tel: 310.886.5880 | fax: 310.764.0330 | email: [email protected]
2
SIGN HOLDERS |
2120
1" Long
Multi-Gripper w/Plugs
White polypropylene.
Snap-in plugs for secure hold.
Fits 1-1/4" price channels, wire
fixtures and cut cases.
Packed: 250
2121-A
1" Long
Multi-Gripper w/Adhesive
Packed: 250
2381
1/2" Stem
Arrowhead Fastener
1/2" capacity.
(Drill 9/32" dia. hole).
Packed: 1,000
2466
5-1/2" Long
Flip-Up Sign Holder
2" Covered face channel.
Hinges upwards.
Packed: Bulk
1050
8" x 3-1/2"
Multi-Holder
White PVC.
Holds signs in price channels, on
wire or cut cases.
Packed: 25
2608
48" Long
Data-Trac 1-1/4"
For Price Channel
White backing with clear face.
Clips into standard 1-1/4" shelf
channel molding, converting it for
use of plain paper labels, etc.
Packed: Bulk
2134-96
96" Long
Clip-On Channel Strip
White PVC.
Clips into standard 1-1/4"
shelf molding or onto wire
and cut cases. 2" channel on face.
Packed: Bulk
Data-Trac for 1-1/4" Shelf Channel
White, Red or Clear PVC backing with clear face and 1-1/4" return
on back. Affixes securely to standard 1-1/4" price channels.
Four sizes available to hold 1-1/4"H - 2"H labels.
47-3/4" Long.
3
Part No.
Holds Labels
Color
Length
Packed
2610W
2610R
2612W
2615C
11⁄4" H
11⁄4" H
11⁄2" H
2" H
White
Red
White
Clear
47 ⁄4" L
473⁄4" L
473⁄4" L
473⁄4" L
Bulk
Bulk
Bulk
Bulk
3
SIGN HOLDERS |
Hinged
116-250
2-1/2" Long
InstaGrip Display-Trak
1-1/4" face channel.
Attaches to plain shelves
up to 1/4" thick.
Packed: 100
116-24
24" Long
up to 1/4" thick.
Packed: Bulk
116-49
48" Long
up to 1/4" thick.
Packed: Bulk
136-250
2-1/2" Long
2" face channel.
up to 1/4" thick.
Packed: 50
136-24
24" Long
2" face channel.
up to 1/4" thick.
Packed: Bulk
136-49
48" Long
2" face channel.
up to 1/4" thick.
Packed: Bulk
138-150
1-1/2" Long
InstaGrip Flush Sign Holder
Accepts material up to .065"
thick. Attaches to plain
shelves 1/2"-5/8" thick.
Packed: 100
126-250
2-1/2" Long
up to 3/4" thick.
Packed: 100
126-24
24" Long
up to 3/4" thick.
Packed: Bulk
126-49
48" Long
up to 3/4" thick.
Packed: Bulk
810-100
1" Long
InstaGrip Hinged 90°
Square Shelf Sign Holder
up to 3/4" thick. Holds material
up to .080" thick.
Packed: 100
For Plain Shelving
4
SIGN HOLDERS |
Hinged
Hinged
Hinged
For Plain Shelving
2652
48" Long
Hinged Data-Trac – 2"
With permanent adhesive.
Hinges upwards.
Packed: Bulk
2653
48" Long
Hinges upwards.
Packed: Bulk
804-075
3/4" Long
InstaGrip Flex Flag
Sign Holder
Hinges upwards.
Packed: Bulk
604-075
3/4" Long
InstaGrip 90° Highlighter
Clip
Hinges upwards.
Packed: Bulk
606-075
3/4" Long
InstaGrip Hinged Data Flag
Hinges upwards.
Packed: Bulk
608-100
1" Long
InstaGrip Hinged Data Grip
Hinges upwards.
Packed: Bulk
608-300
3" Long
InstaGrip Hinged Data Grip
Hinges upwards.
Packed: Bulk
607-100
1" Long
Hinged Channel Bracket
1" wide bracket securely attaches
to data trac and accommodates all
of our C-Channel clips.
Packed: 1,000
609-100
Double Hinged Data Grip – 1"
Co-extruded clear PVC. Clips over
thin backer panel or data trac and
holds sign flush. Both ends accept
material up to 0.065" thick.
Packed: 1,000
Hinged
Hinged
Hinged
5
SIGN HOLDERS |
607-104PA
Hinged Data Flag with
Adhesive Perpendicular
InstaHold
Co-extruded clear PVC. 1" wide
bracket attaches to data trac and
InstaHold is adhered to it.
Packed: 250
607-2380
1" Long
Long Arrowhead Fastener
houses long arrowhead fastener.
Packed: 250
607-2381
1" Long
Arrowhead Fastener
houses arrowhead fastener.
Packed: 250
607-2535
1" Long
Flush InstaHold
bracket securely attaches to data
trac and houses InstaHold.
Packed: 250
607-2536
1" Long
Perpendicular InstaHold
bracket securely attaches to data
trac and houses InstaHold.
Packed: 250
For Plain Shelving
Data-Trac with adhesive
White or Clear PVC backing with clear face and adhesive tape on back.
Affixes securely to shelf edge or any flat display surface.
Five sizes available to hold 5/8"H - 3"H labels.
48" Long.
Part No.
Holds Labels
Color
Length
Packed
2618W
2600
2613W
2614W
2616W
2603
⁄8"H
11⁄4"H
11⁄2"H
13⁄4"H
2"H
3"H
White
White
White
White
White
Clear
48" L
48" L
48" L
48" L
48" L
48" L
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
5
Smart Talker Shelf Edge Information System
Pockets are sealed on 3 sides and allows for 1 or 2 selling surfaces
at the shelf edge. Universally punched to fit almost any shelf style.
Attaches to the shelf perforations using part #2385 or #2395.
Customize the Smart Talker with velcro, adhesive or magnetic
attachments or by mixing and matching pocket sizes. Please
contact us for a quote.
Part No.
Color
# of
Pockets
Width
Height
Packed
SMT1B123
SMT1B63
SMT1B83
SMT1B86
SMT3B82
SMT3B83
SMT3B86
SMT3B8S
SMT5B83
SMT5B86
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
1
1
1
1
3
3
3
3
5
5
12"
6"
8"
8"
8"
8"
8"
8"
8"
8"
3"
3"
3"
6"
2"
3"
6"
Semi-Circle
3"
6"
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
6
SIGN HOLDERS |
Hinged
For Plain Shelving
THG-1
2-7/8" Long
Glass Shelf Ticket Holder
Clear butyrate.
Holds ticket 7/8" high.
Attaches to shelf up to 1/4".
Packed: Bulk
108-075
InstaGrip Perforated Shelf
Sign Holder – Flush
Supplied with 2395 dart clip.
Packed: 250
104-MOD
InstaGrip Flag Converter
Converts flush mounting sign
holder to 90° sign holder.
Packed: 250
304-075
InstaGrip Perforated Shelf
Sign Holder – 90°
Supplied with 2395 dart clip.
Packed: 250
2538
InstaHold Shelf Top
Flag Sign Holder
Holds paper signs up to .015" thick.
Fits most standard perforated
shelves.
Packed: 250
103F-100
1" Long
InstaGrip Hinged Flip-Strip
Hinges to clear lower shelves.
Packed: 250
103F-300
3" Long
Packed: 100
103F-48
48" Long
Packed: Bulk
806-100
1" Long
InstaGrip Flex Sign Holder
Attaches to mounting surface.
1/4” thick.
Hinges upwards.
Packed: 250
806-300
3" Long
Attaches to mounting surface.
1/4” thick.
Hinges upwards.
Packed: 50
Hinged
Hinged
Hinged
Hinged
7
SIGN HOLDERS |
WYSH12
VersaGrip Telescopic
Sign Holder
White and clear plastic.
Base clip lined with anti-slip
coating. Clips to fixtures up to 2"
thick. Sign holder accepts material
up to 1/2" thick. Telescopes from
18" to 23" overall.
Packed: 10
WYSH13S
VersaGrip Sign Protector
Small
Clear plastic. Base clip lined with
anti-slip coating. Clip grips materials
up to 1-1/8" thick, sign holder
accepts material up to 1/32" thick.
Holds sheet 5-9/16"W x 3-5/8"H.
Universal knuckle holds signs
at almost any angle.
Packed: 10
WYSH13L
Large
Holds sheet size 7"W x 5"H.
Packed: 5
WYSH14S
VersaGrip Extended
Sign Protector Small
Universal knuckles allow you to
tilt and rotate at bottom and top.
Packed: 10
WYSH14L
VersaGrip Extended
Sign Protector Large
Holds sheet size 7"W x 5"H.
Universal knuckles allow you to tilt
and rotate at bottom and top.
Packed: 5
WYSH10
4" Long
VersaGrip Spring
Sign Holder Small
Clear plastic.
coating. Sign holder 3" wide and
accepts materials up to 1/4" thick.
Fits on fixtures up to 1-1/8" thick.
Universal knuckle allows the sign
holder to tilt in any direction.
Packed: 25
WYSH11
6-1/4" Long
VersaGrip Extended Spring
Sign Holder
Clear plastic.
coating. Fits on fixtures up to 1-1/8"
up to 1/4" thick. Universal knuckles
allow the sign holder and clip to
tilt in any direction.
Packed: 25
For Plain Shelving
8
SIGN HOLDERS |
9
For Plain Shelving
2234
7-1/2" Long
Shelf-Top Flag Holder
Durable beige GFN.
Universal mounting tabs fit
most perforated shelves.
thick, 4”- 6” wide.
Packed: 100
4270
21"L x 6-3/4"W
Aisle Invader – Radius Top
Beige styrene and acetal.
Double-sided sign holder swivels
to withstand heavy traffic.
Top-load 6" wide signs up
to .050" thick.
Includes two swivel hinges and
attachment hardware.
Packed: Bulk
4272
39-1/2"L x 4-3/4"W
Aisle Invader – Radius Top
to .050" thick.
Packed: Bulk
4274
36"L x 4-3/4"W
Aisle Invader – Square Top
to .050" thick.
Packed: Bulk
SIGN HOLDERS |
3036
3" Long
Sign Gripper
For Walls & Flat Surfaces
Clear PVC.
Accepts material up
to .055" thick.
Packed: 100
3036-96
96" Long – Plain
3036-96A
96" Long – Adhesive
3036-96M
96" Long – Magnetic Tape
Clear PVC.
Accepts material up
to .055" thick.
Packed: Bulk
Sign Gripper
3036-M
3" Long
Magnetic Sign Gripper
With magnetic backing.
Clear PVC.
Packed: 100
3037
6" Long
Sign Gripper
Clear PVC.
Accepts material up
to .055" thick.
Packed: 50
3037-M
6" Long
Magnetic Sign Gripper
Clear PVC.
thick.
Packed: 50
3039-96
Clear 96" Long – Plain
3036-96W
White 96" Long – Plain
3036-96A
Clear 96" Long – Adhesive
3039-96AW
White 96" Long – Adhesive
3036-96M
Clear 96" Long – Magnetic Tape
Clear or White.
With open grip.
Accepts material up
to .125" thick.
Packed: Bulk
3036-96MW
White 96" Long – Magnetic Tape
Sign Gripper
10
SIGN HOLDERS |
3040-18C
Clear – 18" Long
3040-18W
White – 18" Long
Sign-Trak
Clear or White.
Accepts material up
to .055" thick.
Packed: Bulk
3040-96C
3040-96AC
3040-96W
Clear or White.
Accepts material up
to .055" thick.
Packed: Bulk
3040-96AW
Sign-Trak
3041-18C
Clear – 18" Long
3041-18W
White – 18" Long
Sign-Trak Centre
Clear or White.
Accepts material up
to .055" thick.
Packed: Bulk
3041-96C
3041-96AC
3041-96W
Clear or White.
Accepts material up
to .055" thick.
Packed: Bulk
3041-96AW
Sign-Trak Centre
11
140-300
3" Long
InstaGrip SNAP-LOK
Sign Gripper
Co-extruded white PVC.
Snaps open and shut to hold a
wide variety of materials
Packed: 100
140-600
6" Long
InstaGrip SNAP-LOK
Sign Gripper
wide variety of materials.
Packed: 50
140-96
96" Long
InstaGrip SNAP-LOK
Sign Gripper
wide variety of materials
Packed: Bulk
SIGN HOLDERS |
142-600
6" Long
InstaGrip Extra Capacity
SNAP-LOK Sign Gripper
Packed: 50
142-96
96" Long
InstaGrip Extra Capacity
SNAP-LOK Sign Gripper
Packed: Bulk
103-100
1" Long
InstaGrip Grip-Strip
Sign Holder
Accepts material up
to .065" thick.
Packed: 250
103-150
1-1/2" Long
Sign Holder
Accepts material up
to .065" thick.
Packed: 250
103-150M
1-1/2" Long
Sign Holder
thick.
Packed: 100
103-300
3" Long
Sign Holder
Accepts material up
to .065" thick.
Packed: 100
103-300M
3" Long
Sign Holder
Accepts material up
to .065" thick.
Packed: 50
103-600
6" Long
Sign Holder
Accepts material up
to .065" thick.
Packed: 50
103-600M
6" Long
Sign Holder
thick.
Packed: 50
103-48
48" Long – Plain
103-48A
48"Long – Adhesive
103-48M
48"Long – Magnetic Tape
Packed: Bulk
InstaGrip Sign Holder
12
SIGN HOLDERS |
164-100
1" Long
InstaGrip Heavy Duty
Grip-Strip Sign Holder
Accepts material up
to .125" thick.
Packed: 250
164-300
3" Long
Accepts material up
to .125" thick.
Packed: 100
164-48
48" Long – Plain
164-48A
164-48M
Accepts material up
to .125" thick.
Packed: Bulk
109-100
1" Long
InstaGrip Display Holder
1/2" Wide Base
Accepts material up
to .065" thick.
Packed: 250
109-300
3" Long
1/2" Wide Base
Accepts material up
to .065" thick.
Packed: 100
109-48
48"Long – Plain
109-48A
1/2" Wide Base
13
Accepts material up
to .065" thick.
Packed: Bulk
SIGN HOLDERS |
110-100
1" Long
1" Wide Base
Packed: 250
110-300
3" Long
1" Wide Base
Packed: 100
110-600
6" Long
1" Wide Base
Packed: 50
110-48
48"Long – Plain
110-48A
Packed: Bulk
1" Wide Base
210-100
1" Long*
InstaGrip Double Thick
Display Holder
3/4" wide base.
to .150" thick.
Packed: 100
210-300
3" Long*
Display Holder
3/4" wide base.
to .150" thick.
Packed: 100
210-600
6" Long*
Display Holder
3/4" wide base.
With permanent adhesive
to .150" thick.
Packed: 50
210-96
96"Long – Plain
210-96A
210-96M
3/4" wide base.
to .150" thick.
Packed: Bulk
Display Holder
14
SIGN HOLDERS |
15
215-600
6" Long
InstaGrip Angled
Display Holder
1" wide base. With 3/4” permanent
adhesive. Co-extruded clear PVC.
Accepts material .100"
to .150" thick.
Packed: 50
215-96
96" Long
InstaGrip Angled
Display Holder
1" wide base.
to .150" thick.
Packed: Bulk
216-600
6" Long
InstaGrip Free-Standing /
Angled Display Holder
2-1/4" wide base.
Co-extruded clear PVC
to .200" thick.
Packed: Bulk
216-96
96" Long
2-1/4" wide base.
to .200" thick.
Packed: Bulk
218-600
6" Long
3-1/4" wide base.
to .275" thick.
Packed: Bulk
218-96
96" Long
3-1/4" wide base.
to .275" thick.
Packed: Bulk
212-600
6" Long
InstaGrip Free-Standing
Display Holder
2-1/4" wide base.
to .200" thick.
Packed: Bulk
212-96
96" Long
Display Holder
2-1/4" wide base.
to .200" thick.
Packed: Bulk
214-600
6" Long
Display Holder
3-3/8" wide base.
to .275" thick.
Packed: Bulk
214-96
96" Long
Display Holder
3-3/8" wide base.
to .275" thick.
Packed: Bulk
SIGN HOLDERS |
113-300
3" Long
Display Holder
1-3/4" wide base.
to .250" thick.
Packed: 50
113-600
6" Long
Display Holder
1-3/4" wide base.
to .250" thick.
Packed: 50
113-48
48" Long
Display Holder
1-3/4" wide base.
to .250" thick.
Packed: Bulk
2226
3" Long*
Card Holder
1" wide base.
Clear PVC.
Packed: 50
2226
3" Long*
Card Holder
1" wide base.
Clear PVC.
Packed: 50
2226-49
49" Long – Plain
2226-49A
2226-49M
1" wide base.
Clear PVC.
Packed: Bulk
Card Holder
2226-M
3" Long
Magnetic Card Holder
1" wide base.
Packed: 50
2227-M
6" Long
Magnetic Card Holder
1" wide base.
Packed: 50
16
SIGN HOLDERS |
Hinged
Hinged
Hinged
17
2223-6D
Large Gripper Bar
Clear styrene.
2-3/8" x 1" adhesive base.
Holds material up to .125" thick.
Packed: 100
2223-6A
Angled Large Gripper Bar
Clear styrene.
2-3/8" x 1" adhesive base.
Packed: 100
2223-6B
Large Gripper Bar
Free-Standing
Clear styrene.
2-3/8" x 3-1/2" plain base.
Packed: 50
2230-SU
Table Top Card Holder
1-7/8" x 1-3/4" clear styrene.
Packed: 250
2231
Angled Table Top
Card Holder
Accepts material up
to .035" thick.
Packed: 250
105-100
1" Wide
InstaGrip Stacked Case /
Easel Sign Holder
Accepts material up
to .065" thick.
Packed: 250
106-300
3" Wide
Easel Sign Holder
Accepts material up
to .065" thick.
Packed: 50
124-100
1" Long
InstaGrip Swing Hinge
Sign Holder
Packed: 100
124-300
3" Long
Sign Holder
Packed: 100
124-48
48" Long
Sign Holder
Packed: Bulk
SIGN HOLDERS |
Hinged
Hinged
Hinged
Hinged
134-300
3" Long
Swing Hinge Sign Holder
Packed: 100
134-600
6" Long
Packed: 50
134-48
48" Long
Packed: Bulk
168-300
3" Long
InstaGrip Flush Mount Sign
Gripper With Hinge
Packed: 100
811-150
1-1/2" Long
InstaGrip Panel Holder
Dual capacity – one side holds material up to .065" thick, other holds
material up to .165" thick.
Packed: 250
814-100
1" Long
InstaGrip Heavy-Duty
Panel Holder
Dual capacity – both sides hold material up to .250" thick.
Packed: 250
111-100A
1" Long
InstaGrip Double-Grip Clip
Packed: 250
114-100
1" Long
InstaGrip Two-Way
Sign Gripper
Holds materials at 90°.
Will also attach to some wire.
Packed: 250
18
SIGN HOLDERS |
119-100
1" Long
InstaGrip Duo-Grip
Sign Gripper
With two-way gripping capability.
Packed: 250
119-300
3" Long
InstaGrip Duo-Grip
Sign Gripper
Packed: 100
119-96
96" Long
InstaGrip Duo-Grip
Sign Gripper
Packed: Bulk
201
1" Long
InstaGrip Memo Clip
Pen/Sheet Holder
Holds pen or pencil and paper.
Packed: 250
8170C – Clear – 1-3/4 x 1/2"
Clear or white PVC.
Can be imprinted with your logo.
Packed: 200/bag
8170W – White – 1-3/4 x 1/2"
Rediclip Menu Clips
Set includes
#2256-12 (12"
split tube) w/
2255-A (Angled)
#2281 (straight)
Indoor Flag Holder or #2283-40
(angled)
White styrene/PVC.
Packed: 25 sets/Polybag
WYSH18
VersaGrip Mag-Clip
Sign Holder
With magnetic base, holds signs
securely to most metal surfaces.
Clear with white base. Sign holder
tilts back and forth up to 90° angle.
Sign holder holds material up to
1/4" thick. Base size: 1-1/2"W x 3"L
Packed: 2
WYSH19
VersaGrip Adjustable
Sign Holder
Clear plastic.
Sign holder tilts at 15° angles.
Holds material from .008"
to .020" thick.
Base size: 1-3/16"W x 1-1/2"L
Packed: 500
2255-S (Straight)
19
SIGN HOLDERS |
GAT3B
GatorGrip Sign Holder 3"
3" free-standing alligator clip
sign holder with 3-3/4" dia. base.
Metal - black powder
coated matte finish.
Shipped unassembled.
Packed: 50
GAT8B
8" free-standing alligator clip sign
holder with 3-3/4" dia. base.
Packed: 50
GAT18B
18" free-standing alligator clip
sign holder with 3-3/4" dia. base.
Packed: 50
GAT18GB
GatorGrip Goose Neck
Sign Holder 18"
18" free-standing gooseneck
alligator clip sign holder
with 3-3/4" dia. base.
Packed: 25
GAT4FB
GatorGrip Sign Holder 4-3/8"
4-3/8" free-standing straight
alligator clip sign holder with
frosted 1-1/16" triangle base.
Packed: 125
20
SIGN HOLDERS |
21
For Wire Fixtures
301-050
1/2" Wide
InstaGrip Wire Basket
Sign Holder
Fits wire up to 3/8” dia.
Packed: 250
302-375
3/8" Wide
Sign Holder
Fits wire up to 5/16" dia.
Narrower than 301-050, will fit
between narrowest vertical wires.
Packed: 250
302-1375
1-3/8" Wide
Sign Holder
Packed: 250
302-250
2-1/2" Wide
Sign Holder
Packed: 100
401-100
1" Long
Flag Sign Holder
Packed: 250
120-100
1" Wide
Sign Holder
Clips onto wire, holds sign upright.
Packed: 250
114-100
1" Long
InstaGrip Two-Way
Sign Gripper
Holds materials at 90° to
attaching surface, will also
attach to some wire.
Packed: 250
123-100
1" Long
InstaGrip Wire Sign Holder
For 1/4” Wire
Snaps securely onto 1/4" wire.
Packed: 250
2220
Pen/Wire Clip
White plastic.
1/2" x 1/2" base.
Holds material up to 5/16" dia.
Packed: 1,000
SIGN HOLDERS |
Hinged
117-150
1-1/2" Long
InstaGrip Hinged Flush
Sign Holder
Packed: 250
166-100
1" Long
InstaGrip H-Clip
Accepts material .080" thick on
one side, and .125" to .375" thick
on the other side.
Packed: 250
166-150
1-1/2" Long
InstaGrip H-Clip
Accepts material .080" thick on
one side, and .125" to .375" thick
on the other side.
Packed: 100
2124-24
24" Long
Wire Shelf Channel Strip
White PVC.
Fits onto flat wire shelves.
3 adjustable mounting brackets.
1-1/4" channel on face.
Packed: Bulk
2125-96
96" Long
Wire Basket Channel Strip
White PVC. Has curved 1-1/4" face
channel to accommodate your
signage. Fits snugly onto most
vertical wire fixtures.
Packed: Bulk
2125-24
24" Long
White PVC. Has curved, 1-1/4"
face channel to accommodate
your signage. Fits snugly onto
most vertical wire fixtures.
Packed: Bulk
2130
3" Long
UPC Channel Adaptor
White PVC. Use with merchandising
strip. Supplied with dart clip.
Fits standard 1-1/4" shelf channel
or onto wire and cut cases.
Packed: 50
2123-300
3" Long
White PVC. Has flat, 1-1/4" face
channel to accommodate your
Packed: 50
2123-24
24" Long
channel. to accommodate your
Packed: Bulk
2123-48
48" Long
channel. to accommodate your
Packed: Bulk
For Wire Fixtures
22
SIGN HOLDERS |
For Wire Fixtures
Data-Trac for Wire
Clear PVC backing with clear face
Affixes to vertical wire fixtures
Two sizes available to hold 1-1/4"H - 1-9/16"H labels
23
Part No.
Face Channel
Color
Length
Packed
2605
2607
1 /4" H
1 /16" H
Clear
Clear
2" L
24" L
Bulk
Bulk
1
9
1050
8" x 3-1/2"
Multi-Holder
White PVC.
Holds signs on a wide variety of
fixtures, including wire.
Packed: 25
2120
1" Long
Multi-Gripper w/Plugs
Packed: 250
2121-A
1" Long
Packed: 250
LH-350
3-1/2" x 1-1/4" label area
Wire Basket Label Holder
.035" natural polyethylene.
Double loop – holds labels
on wire fixtures.
Can be imprinted if required.
Packed: Banded 50
LH-400
4" x 2" label area
.035” natural polyethylene.
on wire fixtures.
Packed: Banded 50
WLH-1
2-1/4" x 1-1/4" label area
Single loop – holds labels
on wire fixtures.
Packed: 250
WLH-2
2-1/4" x 2-1/4" label area
on wire fixtures.
Packed: 100
SIGN HOLDERS |
WLH-300
3" x 1-1/4" label area
InstaHold Label Holder
Clips over wire up to 3/8" dia.
and is easily removed.
Packed: 100
WLH-350
3-1/2" x 1-1/4" label area
Packed: 100
WCH-200
InstaHold Ticket Holder
Packed: 100
WCH-300
Packed: 100
2308
3/8" x 7/8" in diameter
Oval Split Ring
White polyethylene.
Packed: 1,000
2308-A
2" x 15/16" in diameter
Large Oval Split Ring
White polyethylene.
Packed: 1,000
For Wire Fixtures
24
SIGN HOLDERS |
25
For Wire Fixtures
2309
9/16" in diameter
Round Split Ring
White polyethylene.
Packed: 1,000
2309-A
3/4" in diameter
Round Split Ring
White polyethylene.
Packed: 1,000
K-11
11/16" in diameter
Spiral Ring
White polyethylene.
Packed: 1,000
7062
Metal Pear Clip Merchandiser
2-1/2" plated steel.
Packed: 100
7070
1" in diameter
Metal ‘S’ Hook
Galvanized wire.
Packed: 250
7080
1-5/8" in diameter
Metal ‘S’ Hook
Galvanized wire.
Packed: 100
WYSH20
VersaGrip Spring
Sign Holder Large
Clear plastic.
coating. Fits on fixtures 1.18"
diameter. Top clip fits signs up to
.39" thick. Clear spring clip tilts in
any direction by universal knuckle.
Packed: 5
SIGN HOLDERS |
For Data Tracs
7100-1
96" Long – Plain
7100-1A
7100-1M
White PVC.
Packed: Bulk
Channel Molding – 1"
7100-125
96" Long – Plain
7100-125A
7100-125M
White PVC.
Packed: Bulk
Channel Molding – 1-1/4"
7100-2
96" Long – Plain
7100-2A
7100-2M
White PVC.
Packed: Bulk
Channel Molding – 2"
7100-35
96" Long – Plain
7100-35A
7100-35M
White PVC.
Packed: Bulk
Channel Molding – 3-1/2"
7200-125A
96" Long
Angled Channel Molding1-1/4"
White PVC.
Packed: Bulk
2608
48" Long
Data-Trac 1-1/4"
For Price Channel
White backing with clear face.
Clips into standard 1-1/4" shelf
channel molding, converting it
for use of plain paper labels etc.
Packed: Bulk
26
SIGN HOLDERS |
For Data Tracs
2652
48" Long
Hinges upwards.
Packed: Bulk
2653
48" Long
Hinges upwards.
Packed: Bulk
Hinged
Hinged
Data-Trac for Wire
Clear PVC backing with clear face
Affixes to vertical wire fixtures
Two sizes available to hold 1-1/4"H - 1-9/16"H labels
Part No.
Face Channel
Color
Length
Packed
2605
2607
1 /4" H
1 /16" H
Clear
Clear
2" L
24" L
Bulk
Bulk
1
9
Data-Trac for 1-1/4" Shelf Channel
White, Red or Clear PVC backing with clear face and 1-1/4" return
on back. Affixes securely to standard 1-1/4" price channels.
Four sizes available to hold 1-1/4"H - 2"H labels.
47-3/4" Long.
Part No.
Holds Labels
Color
Length
Packed
2610W
2610R
2612W
2615C
1 ⁄4" H
11⁄4" H
11⁄2" H
2" H
White
Red
White
Clear
47 ⁄4" L
473⁄4" L
473⁄4" L
473⁄4" L
Bulk
Bulk
Bulk
Bulk
1
3
Data-Trac with adhesive
White or Clear PVC backing with clear face and adhesive tape on back.
Affixes securely to shelf edge or any flat display surface.
Five sizes available to hold 5/8"H - 3"H labels.
48" Long.
27
Part No.
Holds Labels
Color
Length
Packed
2618W
2600
2613W
2614W
2616W
2603
⁄8"H
11⁄4"H
11⁄2"H
13⁄4"H
2"H
3"H
White
White
White
White
White
Clear
48" L
48" L
48" L
48" L
48" L
48" L
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
5
SIGN HOLDERS |
Price Ticket Holders
9001
Big Foot Sign Holder
With Claw-Grip for any size card
White Delryn/polypropylene.
Tilts, swivels with adjustable
height to 5". Accepts material
up to .035" thick. Shipped
unassembled.
Packed: 100
9001-SG
For 44mm high card
height to 5". Secure grip for card
44mm high. Shipped unassembled.
Packed: 100
9001-LG
For 61mm high card
height to 5". Secure grip for card
61mm high. Shipped unassembled.
Packed: 100
9011
Swivel Pin Tag Holder
White Delryn. 1-1/2" Pin.
Tilts, swivels. Holds material up to
.035" thick. Shipped unassembled.
Packed: 100
9011-SG
Swivel Pin with Fixed Gripper
For 44mm high card
Packed: 100
9011-LG
Swivel Pin with Fixed Gripper
For 61mm high card
Packed: 100
9010
Pin Tag Holder
White Delryn.
1-1/2" Pin. Holds tag 2-3/8" deep.
Packed: Bulk
28
SIGN HOLDERS |
Price Ticket Holders
SC-95
Clip Tag Holder
Clear Butyrate.
Built-in hinge, can be angled to suit.
Clips easily onto shoes, fixtures, etc.
up to 3/8" thick and holds display
Packed: 1,000
2223-6B
Large Gripper Bar
Free-Standing
Clear styrene.
2-3/8" x 3-1/2" plain base.
Packed: 50
2230-SU
Table Top Card Holder
Packed: 250
2231
Angled Table Top
Card Holder
Accepts material up
to .035" thick.
Packed: 250
105-100
1" Wide
Easel Sign Holder
Accepts material up
to .065" thick.
Packed: 250
106-300
3" Wide
Easel Sign Holder
Accepts material up
to .065" thick.
Packed: 50
WYSH2BLU
Blue – 12" Long
WYSH2P
Pink – 12" Long
WYSH2Y
Yellow – 12" Long
WYSH2G
Green – 12" Long
WYSH2OR
Orange – 12" Long
VersaGrip Curly Wire Clip
WYSH2W – White
WYSH2BLK – Black
Blue, pink, yellow, green
or orange PVC covering.
Clips fit signs or fixtures
up to 5/16" thick.
.125" diameter curly wire easily
winds in any shape, universal
knuckle at either end for flexibility.
Packed: 25
White, black PVC covering.
up to 5/16" thick.
Packed: 25
29
SIGN HOLDERS |
Sign Protectors
Sign Protector
Lightweight clear PVC U-Pocket sign holder. Sign protectors can
be used with a wide range of our sign clips and fasteners.
Part No.
For Sheet Size
Gauge
Packed
SP-3535
SP-3535LG
SP-35HG
SP-35LG
SP-3555HG
SP-3555LG
SP-46HG
SP-46LG
SP-557HG
SP-557LG
SP-7
SP-7LG
SP-8
SP-8LG
SP-5
SP-11
SP-8511LG
31⁄2"W x 31⁄2"H
31⁄2"W x 31⁄2"H
5"W x 3"H
5"W x 3"H
51⁄2"W x 31⁄2"H
51⁄2"W x 31⁄2"H
6"W x 4"H
6"W x 4"H
7"W x 51⁄2"H
7"W x 51⁄2"H
8"W x 21⁄2"H
8"W x 21⁄2"H
8"W x 31⁄2"H
8"W x 31⁄2"H
11"W x 7"H
11"W x 81⁄2"H
11"W x 81⁄2"H
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.020"
0.012"
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Shelf Edge Sign Protector
Lightweight clear PVC shelf edge sign holder. Easily attached to
most industry standard price channels and 1.25" data-tracs.
Part No.
For Sheet Size
Gauge
Packed
SP-B34LG
SP-3555HG
SP-B3555LG
SP-B425HG
SP-B425LG
SP-B435HG
SP-B435LG
SP-B557HG
SP-B557LG
SP-B711HG
SP-B711LG
SP-B835LG
SP-B8511HG
SP-B8511LG
4"W x 3"H
51⁄2"W x 31⁄2"H
51⁄2"W x 31⁄2"H
21⁄2"W x 4"H
21⁄2"W x 4"H
31⁄2"W x 4"H
31⁄2"W x 4"H
7"W x 51⁄2"H
7"W x 51⁄2"H
11"W x 7"H
11"W x 7"H
81⁄2"W x 31⁄2"H
11"W x 81⁄2"H
11"W x 81⁄2"H
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.012"
0.020"
0.012"
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Sign Protector for Data-Trac
Lightweight .020" clear PVC sign protector with 1" fold over
flap along top edge. Sign protectors can be used with a wide
range of our sign clips.
Part No.
For Sheet Size
Color
Packed
SP-835
SP-43RT
8" W x 3 ⁄2" H
4" W x 3" H
Clear
Clear
25
25
1
30
SIGN HOLDERS |
Sign Protectors / Versa Grip Series
Center Shelf Mount Sign Protector
Lightweight clear PVC center shelf mount sign holder. Easily
attached to most industry standard price channels and 1.25"
data-tracs and centers the sign on shelf channels.
31
Part No.
For Sheet Size
Gauge
Packed
SP-T355HG
SP-T355LG
SP-T358HG
SP-T358LG
SP-T425HG
SP-T425LG
SP-T435HG
SP-T435LG
SP-T557HG
SP-T557LG
SP-T711HG
SP-T711LG
SP-T8511HG
SP-T8511LG
5"W x 31⁄2"H
5"W x 31⁄2"H
81⁄2"W x 31⁄2"H
81⁄2"W x 31⁄2"H
21⁄2"W x 4"H
21⁄2"W x 4"H
31⁄2"W x 4"H
31⁄2"W x 4"H
7"W x 51⁄2"H
7"W x 51⁄2"H
11"W x 7"H
11"W x 7"H
11"W x 81⁄2"H
11"W x 81⁄2"H
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
0.020"
0.012"
25
25
25
25
25
25
25
25
25
25
25
25
25
25
WYSH13S
Small
Packed: 10
WYSH13L
Large
Clear plastic. Base clip lined
with anti-slip coating. Clip grips
materials up to 1-1/8" thick, sign
holder accepts material up to 1/32"
thick. Holds sheet size 7"W x 5"H.
Packed: 5
WYSH14S
VersaGrip Extended
Sign Protector Small
Clear plastic. Base clip linedwith
Universal knuckles allow you to
tilt and rotate at bottom and top.
Packed: 10
WYSH14L
VersaGrip Extended
Sign Protector Large
holder accepts material up to 1/32"
thick. Holds sheet size 7"W x 5"H.
Universal knuckles allow you to tilt
and rotate at bottom and top.
Packed: 5
SIGN HOLDERS |
WYSH1MW
White – 12" Long
WYSH1MB
Black – 12" Long
with Magnetic Base
WYSH2BLU
Blue – 12" Long
WYSH2P
Pink – 12" Long
WYSH2Y
Yellow – 12" Long
WYSH2G
Green – 12" Long
WYSH2OR
Orange – 12" Long
WYSH2W – White
WYSH2BLK – Black
Versa Grip Series
With 3/4" magnetic base.
White or black PVC covering.
Clip holds signs up to 5/16" thick.
Packed: 25
Blue, pink, yellow, green
or orange PVC covering.
up to 5/16" thick.
Packed: 25
White, black PVC covering.
up to 5/16" thick.
Packed: 25
WYSH3
1" Long
VersaGrip Adhesive Wire
Sign Holder
White plastic.
Fits .125" to .210" diameter wire.
Universal knuckle tilts and rotates.
Clips securely to wire, or
attaches with adhesive pad, for
displaying signs.
Packed: 50
WYSH4
2-1/4" Long
VersaGrip Adhesive
Sign Holder
Clear plastic.
Clip accepts material up to 5/16"
thick, universal knuckle tilts in
any direction.
Packed: 50
WYSH5
3-1/2" Long
VersaGrip Double
Sign Holder
Clear plastic.
Both clips hold material up
to 3/8" thick. Two crystal-clear
clips connected by a universal
knuckle.
Packed: 50
32
SIGN HOLDERS |
33
VersaGrip Series
WYSH6
2-3/4" Long
VersaGrip Sign Holder Small
Clear plastic. Clip fits material
up to 3/8" thick. Sign holder
accepts material from .008" to
.020" thick. Universal knuckle
allows the crystal-clear sign
holder to tilt in any direction.
Packed: 100
WYSH7
7-1/2" Long
VersaGrip Wire Sign Holder
Clear plastic. Clip fits material
up to 3/8" thick. Sign holder
accepts material from .008"
to .020" thick. Clip and sign
holder tilt in any direction by
universal knuckles.
Packed: 50
WYSH8
4" Long
VersaGrip Sign Holder Large
holder accepts material from
.008" to .020" thick. Universal
knuckle allows the sign holder
to tilt in any direction.
Packed: 25
WYSH9
6" Long
VersaGrip Extended
Sign Holder
holder accepts material from
.008" to .020" thick Universal
knuckles allow the sign holder
and clip to tilt in any direction.
Packed: 25
WYSH10
4" Long
VersaGrip Spring
Sign Holder Small
with anti-slip coating. Sign holder
3" wide and accepts materials up
to 1/4" thick. Fits on fixtures up
to 1-1/8" thick. Universal knuckle
allows the sign holder to tilt
in any direction.
Packed: 25
WYSH11
6-1/4" Long
VersaGrip Extended Spring
Sign Holder
with anti-slip coating. Fits on
fixtures up to 1-1/8" thick. Sign
holder accepts material up to
1/4" thick. Universal knuckles
allow the sign holder and clip
to tilt in any direction.
Packed: 25
SIGN HOLDERS |
WYSH12
VersaGrip Telescopic
Sign Holder
White and clear plastic.
coating. Clips to fixtures up to 2"
up to 1/2" thick. Telescopes from
18" to 23" overall.
Packed: 10
WYSH15
6-1/2" Long
VersaGrip Suction Cup
Sign Holder
Clear plastic.
Attaches to glass surfaces.
Clip holds material up to 3/8"
thick. 1-1/2" O.D. suction cup.
Universal knuckles tilt and rotate
from bottom and top.
Packed: 25
WYSH16
7" Long
VersaGrip Magnetic
Sign Holder
White base.
Magnetic base for use on most
metal surfaces, 1-1/4" diameter.
Displays material up to 3/8" thick.
Packed: 25
WYSH18
VersaGrip Mag-Clip
Sign Holder
With magnetic base, holds signs
securely to most metal surfaces.
Clear with white base. Sign holder
tilts back and forth up to 90°
angle. Sign holder holds material
up to 1/4" thick. Base size: 11/2"W x 3"L
Packed: 2
WYSH19
VersaGrip Adjustable
Sign Holder
Clear plastic.
Sign holder tilts at 15° angles.
Holds material from .008"
to .020" thick.
Base size: 1-3/16"W x 1-1/2"L
Packed: 500
WYSH20
VersaGrip Spring
Sign Holder Large
Clear plastic.
coating. Fits on fixtures 1.18"
diameter. Top clip fits signs up to
.39" thick. Clear spring clip tilts in
any direction by universal
knuckle.
Packed: 5
WYSH21
Flag Sign Holder
White plastic.
.43” diameter support tube that
stays rigid by a spring effect at
the base of the flag.
Holds banners up to 8.27”W.
Suction cup 2.17” diameter.
Packed: Bulk
VersaGrip
34
PRODUCT MERCHANDISING |
Display Stands
Adjustable Merchandising Shelf Holder w/Ratchet Gear
Clear polystyrene body and polycarbonate hook. Ratchet gear adjusts at 15°
intervals. Easily snaps onto various fixture types and allows products to stand
out from a shelf face or gondola.
Part No.
Wide
High
Deep
Color
Packed
WYTS30
WYTS31
WYTS32
1.57"
1.97"
2.87"
3.15"
3.15"
3.86"
1.57"
1.97"
2.76"
Clear
Clear
Clear
Bulk
Bulk
Bulk
Adjustable Merchandising Shelf Holder w/Ratchet Gear
Clear polystyrene body and polycarbonate hook. Ratchet gear adjusts at 15°
intervals. Easily snaps onto various fixture types and allows products to stand
out from a shelf face or gondola.
Part No.
Wide
High
Deep
Color
Packed
WYTS33
3.15"
4.37"
1.57"
Clear
Bulk
WYTS22
Tilt Adjustable Display Stand
Top: 2.76" x 2.76"
Stem: 0.35" dia. x 0.28" dia. x 1.97"H
Bottom: 3.94" x 3.94"
Clear polycarbonate / elastomer.
This versatile display stand tilts
and rotates in any direction.
Skid-proof coating on the surface
holds merchandise securely to
create an effective display.
Applicable to a wide range
of merchandise.
Packed: 10
WYTS23
Top: 2.76" dia.
Stem: 0.35" dia. x 0.28" dia. x 1.97"H
Bottom: 3.94" dia.
of merchandise.
Packed: 10
WYTS24
Top: 2.76" x 2.76"
Stem: 0.35" dia. x 0.28" dia. x 3.94"H
Bottom: 3.94" dia.
of merchandise.
Packed: 10
WYTS25
Top: 3.94" dia.
Stem: 0.35" dia. x 0.35" dia. x 3.94"H
Bottom: 3.94" dia.
of merchandise.
Packed: 10
35
WYTS26
Tilt Adjustable Merchandise
Holder Small
Table: 3.15"W x 4.33"H x 0.08" thick
Stem: 0.39" square x 1.97"H
Base Plate: 3.15"W x 3.27"D x 0.08" thick
WYTS27
Tilt Adjustable Merchandise
Holder Large
Table: 3.78"W x 5.04"H x 0.08" thick
Stem: 0.59" square x 3.94"H
Base Plate: 2.52"W x 3.94"D x 0.08" thick
WYTS34
Tilt Adjustable Merchandise/
Literature Stand with Serration
Gear Small
Overall Size: 7.87"W x 7.48"H x 2.76"D
WYTS35
Tilt Adjustable Merchandise/
Literature Stand with Serration
Gear Large
UNS-1
Universal Display Stand
Overall Size: 4"W x 4.75"H x 4"D
WYMS28
Motion Solar Powerd
Turn Table
WYMS29
Motion Battery Powered
Turn Table
Overall Size: 3.3"dia. x 1.26"H
Display Stands
Clear polycarbonate / PMMA.
Adjustable by 15° intervals.
Slide-in bottom base makes
the display stable.
Packed: Bulk
Adjustable by 15° intervals.
Slide-in bottom base makes
the display stable.
Packed: Bulk
Serration gear makes the setting
adjustable at intervals of 5°.
Capacity up to 13.2 lbs (6 kgs).
Packed: Bulk
Serration gear makes the setting
adjustable at intervals of 5°.
Capacity up to 13.2 lbs (6 kgs).
Packed: Bulk
Clear styrene.
Hundreds of uses including
holding books, plates and bowls,
show cards and more
Packed: 40
White ABS. Capacity: 0.44lbs
(200g). The solar powered turn
table rotates in either clockwise
or counterclockwise direction.
With the auto-reverse boss
inserted into the assigned hole,
it returns automatically at 300°
Packed: Bulk
White ABS.
Capacity: 0.44lbs (200g)
Compact and light body turntable
operates by two AA batteries.
(Batteries not included).
Packed: Bulk
36
12 Pack - 283⁄4" Long
6 Pack - 157⁄16" Long
12 Pack - 2813⁄16" Long
Versa-Strip
Built-In Hook
8 Pack - 1915⁄16" Long
12 Pack - 283/8" Long
6 Pack - 151⁄2" Long
Versa-Strip
with Header
8 Pack - 197⁄16" Long
6 Pack - 15-1⁄16" Long
Versa-Strip
Plain
Merchandising Strips & Accessories
9906B
Black
9906-HB
Black
9906W
White
9908B
Black
9906-LHB
Black
9906-HW
White
9906-LHW
White
9908W
White
9908-HB
Black
9908-HW
White
9912B
Black
1-3/8" space between hooks
9908-LHB
Black
9912W
White
9908-LHW
White
9912-HB
Black
9912-HW
White
Molded in black or white polypropylene.
Part No.
9906B
9908B
9912B
9906-HB
9908-HB
9912-HB
9906-LHB
9908-LHB
9912-LHB
37
Black
Black
Black
Black
Black
Black
Black
Black
Black
9906W
9908W
9912W
9906-HW
9908-HW
9912-HW
9906-LHW
9908-LHW
9912-LHW
White
White
White
White
White
White
White
White
White
With header 3" x 1-1/4" for labels
or logo imprint.
Contact our sales desk for custom
imprinting quote.
# of
Packs
Length
Space
between Hooks
Packaged
6
8
12
6
8
12
6
8
12
151⁄16"
197⁄16"
283⁄8"
151⁄2"
1915⁄16"
2813⁄16"
157⁄16"
197⁄8"
283⁄4"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
Ctn. 500
Ctn. 400
Ctn. 300
Ctn. 500
Ctn. 350
Ctn. 250
Ctn. 500
Ctn. 350
Ctn. 250
9912-LHB
Black
9912-LHW
White
With header 3" x 1-3/4" for labels.
Hooks onto wire and corrugated
cartons – with built-in hooks.
HOW TO DETERMINE THE
SPACING BETWEEN HOOKS
The spacing between hooks, on all of our
merchandising strips, is measured on a point-topoint basis. The measurement is taken from the
top of one hook, to the top of the next hook.
See illustration for explanation.
Measure
Here
12 Pack - 293⁄16" Long
6 Pack - 15" Long
10 Pack - 32" Long
Double-Duty Merchandising Strip
Multi-Function
12 Pack - 30" Long
10 Pack - 30" Long
12 Pack - 24" Long
14 Pack - 221⁄2" Long
Pak-Strip
with Header Panel
Econo-Strip
with Adhesive Pad
ES-6
DD-6
DD-7
ES-8
DD-8
7214
ES-12
1-1/2"
space
between
hooks
7216
3" space
between
hooks
7216-12
2-1/2"
space
between
hooks
With adhesive pad.
Natural .035” polyethylene.
Holds 6, 8 or 12 packages.
Hole punched.
7217
White .035" polyetheylene.
Holds 10, 12 and 14 packages.
Optional adhesive pad.
Header panel 2-3/4" x 1-5/16" for labels
or logo imprint – Contact our sales desk
for custom imprinting quote.
Part No.
Color
# of
Packs
Length
Space
between Hooks
Packaged
ES-6
ES-8
ES-12
7214
7216
7216-12
7217
DD-6
DD-7
DD-8
DD-12
Natural
Natural
Natural
White
White
White
White
White
White
White
White
6
8
12
14
10
12
10
6
7
8
12
12-1/2"
16-1/4"
24"
22-1/2"
30"
30"
32"
15"
17-1/4"
19-3/4"
29-3/16"
1-7/8"
1-7/8"
1-7/8"
1-1/2"
3"
2-1/2"
3"
2-3/8"
2-3/8"
2-3/8"
2-3/8"
Banded: 50
Banded: 50
Banded: 50
Banded: 50
Banded: 50
Banded: 50
Banded: 50
Ctn. 100
Ctn. 100
Ctn. 100
Ctn. 100
DD-12
3" space
between hooks
Header panel
2-3/4" x 3-1/2"
White Polypropylene.
Dual purpose hooks accept both punched
or plain type packages.
Holds 6,7,8 or 12 packages.
38
Adhesive Display
Strip
Quicker-Strip
12 Pack - 221⁄2" Long
12 Pack - 231⁄2" Long
12 Pack - 301⁄2" Long
8 Pack - 21" Long
Pak-Strip
Standard
12 Pack - 193⁄4" Long
Flexi-Strip
Double-Duty Merchandising Strip
with Header Panel
6 Pack - 26" Long
DD-H6
DD-H8
FX-12
1-7/8" space
between hooks
4-1/2" space
between hooks
DD-H12
Dual purpose hooks accept both punched
or plain type packages.
Holds 6,8 or 12 packages.
Header panel 3" x 1-3/8" for labels
or logo imprint – Contact our sales desk
for custom imprinting quote.
Natural .023"
polyethylene.
Holds 12 packages.
Part No.
Color
# of
Packs
Length
Space
between Hooks
Packaged
DD-H6
DD-H8
DD-H12
FX-12
7218
ADS-12
QS-24
White
White
White
Natural
Natural
Clear
Natural
6
8
12
12
6
12
12
163⁄8"
21"
301⁄2"
231⁄2"
26"
193⁄4"
221⁄2"
23⁄8"
23⁄8"
23⁄8"
17⁄8"
41⁄2"
19⁄16"
17⁄8"
Ctn. 100
Ctn. 100
Ctn. 100
Banded: 50
Banded: 50
Ctn: 1,000
Bulk
39
ADS-12
7218
Natural .035"
polyethylene.
Holds 6 packages.
1-9/16" space
between hooks
Clear 15 mil plastic.
Holds 12 packages.
Adhesive holds product
in place during loading,
shipping, and in store –
until customer removes
them.
QS-24
1-7/8" space
between hooks
Natural
polypropylene.
Holds 12 packages.
“Positive Lock”
technology holds
merchandise secure
during shipment.
InstaGrip
Superstrip
Package Hanger
Double-Sided
Merchandising Strip
12 Pack - 31" Long
12 Pack - 323⁄8" Long
18 Pack - 421⁄4" Long
Metal Clip Strip
7 Pack - 10" Long
12 Pack - 241⁄2" Long
Quicker-Strip
w/Header Panel
24 Pack (12 Per Side) - 281⁄4" Long
SS-7
1-3/4" space
between grippers
MCS-12
2-3/8" space
between hooks
Super strong grip!
QS-24H
1-7/8" space
between hooks
Holds 12 packages
Header panel 3-1/2" x
1-3/8" for labels or logo
imprint – Contact our
sales desk for custom
imprinting quote.
With two adhesive pads.
Units are easily snapped
together for multiple
packages.
Holds 7 packages.
Metal.
Holds 12 or 18
packages.
Part No.
Color
# of
Packs
Length
Space
between Hooks
Packaged
QS-24H
SS-7
MCS-12
MCS-18
MCS-12H
7232
Natural
Clear
Metal
Metal
Metal
Natural
12
7
12
18
12
24
241⁄2"
10"
323⁄8"
421⁄4"
31"
281⁄4"
17⁄8"
13⁄4"
23⁄8"
13⁄4"
23⁄8"
23⁄8"
Bulk
Bulk
Bulk
Bulk
Bulk
Ctn. 100
MCS-18
1-3/4" space
between hooks
MCS-12H
7232
2-3/8" space
between hooks
2-3/8" space
between hooks
Metal.
Holds 12 packages.
3-1/2" x 1-1/4" header
panel.
Holds 12 packages
on each side. Top and
bottom holes allow
multiple strips to be
linked together.
Open hook design
securely holds most
product packaging.
40
SNS-1
Snip-Strip
200 strips with 12 hooks each
420 ft. roll – 2400 hooks
Continuous Display Strip.
Clear .020" plastic.
Just cut to the required length alternates a die-cut hole with
each hook position.
Packed: Bulk
USE
3
WAYS
9510-D1
with DAF-1
9510-D2
with DAF-2
Tri-Barker 90° Shelf Bracket
Clip Supplied, Unassembled
Please specify type of clip:
(DAF-1) Short for Merchandising Strips
(DAF-2) Long for Coupon Pads
41
White, super strong, glass
filled nylon with uniqe doubleended arrowhead clip, to
attach accessories and
secure them firmly.
Packed: 50 Unassembled
7062
Packed: 100
7070
1" in diameter
Metal ‘S’ Hook
Galvanized wire.
Packed: 250
7080
1-5/8" in diameter
Metal ‘S’ Hook
Galvanized wire.
Packed: 100
7092
3-1/2" Long
Shelf-Top Merchandising Hook
Zinc plated wire.
Securely hangs merchandising
strips away from shelf edge.
Fits standard shelf perforations.
Packed: 50
S-3
1-1/2” Long
Large Loop ‘S’ Hook
Galvanized wire with 7/8” loop
Packed: 100
7219
31-1/2" Long
Pak Strip with Oversized
Header Panel
White .035" polyethylene. 2"
spacing between hooks. Holds
14 packages. Header panel is
5-1/2"W X 3-1/2"H
Packed: 50
7224
24-1/2" Long
Pak Strip – Accordian Style
Natural .024" polyethylne. Holds
12 packages. Header panel size:
2"W x 2-1/2"H. 1-3/4" spacing
between hooks.
Packed: 50
DVDCD-3
29-1/2" Long
DVD/CD 3 Pocket Display Strip
Clear rigid .020" PVC. 3 pockets.
Pocket size: 5-3/4"W x 8-1/8"H x
4-3/8"D. This unit ships flat and
is easily assembled. Ideal for
displaying CD's or DVD's and
easily attaches to most fixtures
using an S-Hook.
Packed: Bulk
DVDCD-4
34" Long
DVD/CD 4 Pocket Display Strip
Clear rigid .020" PVC. 4 pockets.
Pocket size: 5-3/4"W x 8-1/8"H x
4-3/8"D. This unit ships flat and
is easily assembled. Ideal for
displaying CD's or DVD's and
easily attaches to most fixtures
using an S-Hook.
Packed: Bulk
42
43
Merchandising Hooks
BPH-3
3" Long
Butterfly Package Hooker
White glass filled nylon.
Packed: 100
BPH-5
5" Long
Packed: 100
BPH-7
7" Long
Packed: 100
2307-1
1" Long
Package Hookers
White nylon.
Fit securely into die-cut ‘T’ slot.
Packed: 250
2307-2
2" Long
Package Hookers
White nylon.
Packed: 250
2307-4
4" Long
Package Hookers
White nylon.
Packed: 100
2307-5
5" Long
Package Hookers
White nylon.
Packed: 100
2307-6
6" Long
Package Hookers
White nylon.
Packed: 100
2307-8
8" Long
Package Hookers
White nylon.
Packed: 100
1077W
White – 4" Long
1077B
Black – 4" Long
‘Quik-Stik’ Merchandising
Hook – Single Prong
1078W
White – 6" Long
1078B
Black – 6" Long
1079W
White – 8" Long
1079B
Black – 8" Long
1070-12W
White – 12" Long
1070-12B
Black – 12" Long
1077-DW
White – 4" Long
1077-DB
Black – 4" Long
Hook – Double Prong
1078-DW
White – 6" Long
1078-DB
Black – 6" Long
1079-DW
White – 8" Long
1079-DB
Black – 8" Long
Merchandising Hooks
White or black glass
reinforced plastic.
Eliminates die-cutting.
Spikes easily into corrugated
and other soft materials.
Packed: 100
reinforced plastic.
Packed: 100
reinforced plastic.
Packed: 100
reinforced plastic.
Packed: 100
reinforced plastic.
Packed: 100
reinforced plastic.
Packed: 100
reinforced plastic.
Packed: 100
44
1102
2" Long
‘Multi-Hooks’
White plastic.
Snaps over wire and corrugated
fixtures, or into die-cut slots.
Packed: 100
1104
4" Long
‘Multi-Hooks’
White plastic.
fixtures, or into die-cut slots.
Packed: 100
1106
6" Long
‘Multi-Hooks’
White plastic.
fixtures, or into die-cut slots
Packed: 100
11-LH
2-3/16" x 1-1/8"
Multi-Hook Label Holder
(fits 1100 series hooks)
White PVC.
Attaches securely to base of hook
Accepts label 2-1/4" x 1".
Packed: 250
1070-HW
White – 5/8" Hook
reinforced plastic.
Packed: 250
1070-HB
Black – 5/8" Hook
‘Quik-Stik’ Hook
1076W
White – 2" Long
1076B
Black – 2" Long
‘Quik-Stik’ Flag Pin
45
Merchandising Hooks
reinforced plastic.
Use with our #2256 Split Tube
for flagging on cut cases, etc.
Packed: 100
1050-HW
White – 5/8" Long
1050-HB
Black – 5/8" Long
Merchandising Hooks
White or black, heavy-duty,
glass reinforced plastic.
Packed: 250
Pegboard/Slatwall Hook
1056W
White – 2" Long
1056B
Black – 2" Long
Packed: 250
Pegboard/Slatwall Flag Pin
1057W
White – 4" Long
1057B
Black – 4" Long
Pegboard/Slatwall Hook –
Single Prong
1058W
White – 6" Long
1058B
Black – 6" Long
Single Prong
1059W
White – 8" Long
1059B
Black – 8" Long
Single Prong
1050-12W
White – 12" Long
1050-12B
Black – 12" Long
Single Prong
Custom colors available, subject
to minimum quantities.
Packed: 100
Packed: 100
Packed: 100
Packed: 100
46
1057-DW
White – 4" Long
1057-DB
Black – 4" Long
Double Prong
Packed: 100
1058-DW
White – 6" Long
1058-DB
Black – 6" Long
Double Prong
Packed: 100
1059-DW
White – 8" Long
1059-DB
Black – 8" Long
Double Prong
Packed: 100
10-LH
2-5/8" x 1-1/4"
Pegboard Hook Label Holder
(Fits 1050 & 1070 Series Hooks)
DHPS
HPS Display Hook Product
Stop
47
Merchandising Hooks
White PVC.
Attaches securely to base of hook,
accepts labels 2-1/2" x 1-1/4".
Packed: 250
40 mil natural polyethylene,
1”O.D. Works with most standard
hooks. Attaches and detaches
quickly and easily.
Packed: 1,000
Product Hang Tabs
0104
1-5/8"W x 1-1/8"H
Roll Form Tabs
Clear plastic, .010" thickness.
With clear adhesive.
Packed: Roll of 4,500
6116
1-5/8"W x 1-1/4"H
Cluster Tabs
Packed: Full Sheets Only (20 per)
0116
1-5/8"W x 1-7/16"H
Individual Tabs – Bulk Packed
Packed: Polybag 1,000
1511
2"W x 1-11/16"H
2814
7/8"W x 1-3/8"H
Roll Form Tabs
3375
1-3/8"W x 1-11/16"H
1596
1"W x 1-5/16"H
Roll Form Tabs
7/16" diameter hole.
0516
1"W x 1-7/16"H
6494
3/4"W x 1-1/4"H
Cluster Tabs
2711
3/4"W x 1-5/8"H
Clear PETG, .015" thickness.
2383
Versa Clip
.020" clear PVC.
With adhesive strip.
CP-20
Bottle Neck Tab
.020" natural plastic.
Die-cut holes: 1" diameter
and 5/8" diameter.
Packed: 1,000
Custom shapes and sizes available!
ER-20
Bottle Neck Tab
.020" natural plastic.
Die-cut holes: 1-3/16" diameter
and 5/8" diameter.
Packed: 1,000
48
10-LH
2-5/8" x 1-1/4"
Pegboard Hook Label Holder
(Fits 1050 & 1070 Series Hooks)
Pegboard / Slatwall Accessories
White PVC.
Attaches securely to base of hook,
accepts labels 2-1/2" x 1-1/4".
Packed: 250
DHPS
HPS Display Hook Product
Stop
40 mil natural polyethylene,
1”O.D. Works with most standard
hooks. Attaches and detaches
quickly and easily.
Packed: 1,000
1066
14" Long
Scan-A-Strip
Clear PVC.
Fits most standard pegboard
hooks. 3" x 1-1/4" label face.
Banded: 100's
ICU-2
Inventory Control Clip
Natural polyethylene. Holds
product forward. Will fit most
types of pegboard hook.
Packed: 1,000
BPP S/SHELF BI – Black
BPP S/SHELF CI – Clear
BPP S/SHELF RI – Red
BPP S/SHELF WI – White
Shoe Shelf
BPP CAP SHELF
Cap Shelf
49
10"W x 4"D.
For slat wall.
Packed: 100
8-1/2"W x 12"D.
For slat wall.
Packed: 100
2257S – Straight
2257A – Angled
Pegboard/
Slatwall Header
Card Holder
2258
Pegboard/
Slatwall Flag
Holder
6 pc. set includes two
#2256-12 (12" split
tubes), two #1056W
(pegboard/slatwall
hooks) & two #2281
(straight) or #2283-40
(angled) (Adhesive
faced sign holders)
Set includes
#2256-12 (12" split
tube) and #1056W
(pegboard/slatwall
hook)
Pegboard / Slatwall Accessories
White plastic.
Supports lightweight cards on
pegboard or slatwall.
White plastic.
Accepts material up to .20" thick
Other lengths of split tube available.
SBS-93A
2-3/8" Long
Slatwall Bracket
White styrene.
For lightweight displays
on slatwall.
Packed: 250
PBS-94A
2-3/8" Long
Pegboard Bracket
White styrene.
For lightweight displays
on pegboard.
Packed: 250
2375
2-1/2" Long
InstaGrip Slatwall Bracket
Accepts material .100" thick.
Packed: 100
120-100
1" Long
InstaGrip Slatwall/Wire
Sign Holder
Holds signs flush to slatwall.
Accepts materials up to .065" thick.
Packed: 250
3550
1" Long
Slatwall Merchandiser Clip
White PVC.
Fits into slatwall – supports
lightweight corrugated
merchandisers.
Packed: 250
50
FAB-R234
2", 3", and 4" Riser Set
71345CI
3", 4", and 5" Riser Set
Display Risers
51
Plastic Display Stands
Three-piece set. Call for custom
sized and colors.
Packed: ?
AHS-CD 1B
One Pocket – Black
CD Holder
Black Sintra.
6"W x 5"H x 4"D.
Packed: 48
AHS-CD 1C
One Pocket – Clear
CD Holder
Clear Acrylic.
6"W x 5"H x 4"D.
Packed:
AHS-CD 3C
Three Pocket – Clear
CD Holder
Clear Acrylic.
6"W x 7-1/2"H x 8-1/2"D.
Packed: 12
AHS-CD 4C
Four Pocket – Clear
CD Holder
Clear Acrylic.
6"W x 8"H x 11-1/2"D.
Packed: 12
AHS-CD 4x2C
8 Pocket – Clear
CD Holder
Clear Acrylic.
Packed: 6
AHS-CD HD
CD Holder Header
Only for 3 or 4 compartment cd
holders. 6"W x 7"H
Packed: 24
Power Wing Accessories
WCM-2
1" Long
Metal Power Wing Clip
Zinc plated steel.
Fits wire up to 7/32" dia. and
corrugated up to 5/16" thick.
Packed: 100
3500
1" Long
Power Wing Clip – Heavy Duty
White PVC.
Fits up to 1/4" wire and
1/8" corrugated.
Packed: 100
3510
1" Long
Power Wing Clip – Extra Duty
White PVC.
Fits up to 1/4" wire and
1/8" corrugated.
Extra gripping area for
more security.
Packed: 100
3520
1" Long
Wire Grid Sign Holder
3-3/4" x 1-1/4" clear butyrate.
Fits up to 3/16" wire.
Holds signs up to 1/8" thick.
Packed: 100
3530
7 Gauge Steel Wire
Power Bar
Mounting arm adjusts up to 14".
Fits most standard perforated
shelving and holds corrugated
display units in conjunction with
Power Wing Clips.
Packed: 50
1102
2" Long
‘Multi-Hooks’
White plastic.
Snaps onto a wide range of wire
fixtures and can also be used on
corrugated board.
Packed: 100
1104
4" Long
‘Multi-Hooks’
White plastic.
corrugated board.
Packed: 100
1106
6" Long
‘Multi-Hooks’
White plastic.
corrugated board.
Packed: 100
11-LH
2-3/16" x 1-1/8"
Multi-Hook Label Holder
(fits 1100 series hooks)
White PVC.
Attaches securely to base of hook.
Accepts label 2-1/4" x 1".
Packed: 250
52
Stock Signage / Tilt Bins
1010-ER – English/Red
1010-EB – English/Blue
1010-FR – French/Red
1010-FB – French/Blue
Business Hour Decal Sets
1011-SP – Special
1011-IT – It's New
1011-AS – As Advertised
1011-SU – Super Buy
Starburst Hi-Liters
1012-SP – Special
0.020" Styrene.
4-1/4" Diameter.
Printed red and black, one side.
Select from: 'SPECIAL', 'IT'S NEW',
'AS ADVERTISED', or 'SUPER BUY'
Custom imprinting available.
Packed: 100
1012-SU – Super Buy
Feature Arrows
0.020" Styrene.
5-3/4" x 3-1/4"
Printed red and black, two sides.
Select from: 'SPECIAL', 'IT'S NEW',
'NEW', or 'SUPER BUY'
Custom imprinting available.
Packed: 100
20303B
3 Bin Horizontal Tilt Bin – White
Interlocking storage system.
Stackable and wall mountable.
Packed: 4
20403B
Packed: 6
20503B
Packed: 6
20603B
Packed: 12
20903B
Packed: 12
50300BTB
3 Bin Unit Tilt Bin Dividers
Add dividers to separate supplies
within each bin. 3 pc. set.
Packed: 3
50400BTB
Packed: 4
50600BTB
Packed: 6
2LRODS
Tilt Bin Locking Rod
Keeps bins from falling forward.
5 units per pack.
Packed: ?
1012-IT – It's New
1012-NE – As Advertised
53
9-1/2"W x 7-1/4"D. Printed in
a choise of red or blue panel with
black type and white background.
Set of reusable time inserts
included. Custom signs available,
subject to minimum qtys.
Packed: In Sets
SHELF MANAGEMENT |
9101GY
9102GY
9103C
9103-48C
Label Holders
Heavy Duty Hinged Label Holder
PVC hinged label holder with adhesive tape on top flap.
Affixes to any shelf or flat display surface.
Ideal for use with metal warehouse shelving and storage racks.
Part No.
For Labels Up To
Color
Packed
9101GY
9102GY
9103C
9103-48C
11 ⁄2"W x 3 ⁄4"H
49⁄16"W x 21⁄4"H
3"W x 11⁄4"H
48"W x 11⁄4"H
Grey
Grey
Clear
Clear
100
100
100
Bulk
1
3
LH-350
3-1/2" x 1-1/4" label area
on wire fixtures.
Packed: Banded 50
LH-400
4" x 2" label area
.035” natural polyethylene.
on wire fixtures.
Packed: Banded 50
WLH-1
2-1/4" x 1-1/4" label area
on wire fixtures.
Packed: 250
WLH-2
2-1/4" x 2-1/4" label area
on wire fixtures.
Packed: 100
WLH-300
Packed: 100
WLH-350
3-1/2" x 1-1/4" label area
Packed: 100
54
SHELF MANAGEMENT |
55
Label Holders
WCH-200
Packed: 100
WCH-300
Packed: 100
TRS-1
2-1/2" x 1-1/4"
Ticket Rail Strips
.010" Clear PVC. Fit into 1-1/4"
oruce channels. Sold in bundles
of 250 only.
Packed: Banded 250's
TRS-2
3-1/2" x 1-1/4"
Ticket Rail Strips
of 250 only.
TRS-48
48" x 1-1/4"
Ticket Rail Strips
of 250 only.
SD-21
21mm High
Shelfmaster 21mm Shelf Divider
White, molded styrene. Adjustable
for spacing, locks into channel
moldings. Pair consists of right
and left divider.
Packed: Polybag 10's
SD-70
70mm High
and left divider.
SD-120
120mm High
and left divider.
LSD-1
Lightweight Shelf Divider
.020" Clear PVC. With adhesive
strip. 15" long x 3" high. Custom
sizes available.
Packed: 50
SHELF MANAGEMENT |
SDE-2
48" Long
Shelfmaster Face Channel
White PVC with permanent
adhesive. Curved, 1-1/4" channel
holds signs and UPC labels.
Custom lengths available
to special order.
Packed: Bulk
SDE-4
48" Long
Shelfmaster Face Channel
White PVC with permanent
adhesive. Flat, 1-1/4" channel
holds signs and UPC labels.
Custom lengths available
to special order.
Packed: Bulk
1052
Spring Wobbler
White polystyrene / metal spring.
Two adhesive pads. 1-1/8" spring.
Packed: 100
1080
Channel Mount
Spring Wobbler
White polystyrene / metal spring.
1" metal spring. Adhesive pad.
Fits most 1-1/4" shelf channels.
Packed: 100
2264-15
5-7/8" Long
Straight Wobbler
.015" Clear PVC. Adhesive
pads both ends.
Packed: 100
2264-20
7-7/8" Long
Straight Wobbler
pads both ends.
Packed: 100
2265
6-3/4" Long
Channel Wobbler
.010" Clear PVC.
Packed: 100
2265-A
6-3/4" Long
Channel Wobbler
pad one end.
Packed: 100
2267
6-3/4" Long
Channel Wobbler
pad one end.
Packed: 100
Label Holders
56
SHELF MANAGEMENT |
PCW-1
(Horizontal)
PCW-2
(Vertical)
PCW-3
(Round)
57
Label Holders
2267-2
6-3/4" Long
Channel Wobbler
pads on both ends.
Packed: 100
2268
4-3/4" Long
Channel Wobbler
pad on one end.
Packed: 100
2268-2
4-3/4" Long
Channel Wobbler
pads on both ends.
Packed: 100
2269
6-3/4" Long
Pegboard Wobbler
pad on one end.
Packed: 100
2269-2
6-3/4" Long
Pegboard Wobbler
pads on both ends.
Packed: 100
2281
1-5/8" Pin
Straight Coupon Pin
White styrene. With permanent
adhesive. 1-1/4" x 1-1/4" base.
Packed: 250
2283-40
1-5/8" Long
Angled Coupon PIn
White styrene. With permanent
adhesive. 1-1/4" x 1-1/4" base.
Packed: 250
Channel Wobbler
.010" White PVC. Fits into standard 1-1/4" price channel or
can be supplied with adhesive strip. Can be custom imprinted
at additional cost.
Part No.
Panel Size
Type
Packed
PCW-1
PCW-1A
PCW-2
PCW-2A
PCW-3
PCW-3A
5"W x 31⁄2"H
5"W x 31⁄2"H
33⁄4"W x 51⁄4"H
33⁄4"W x 51⁄4"H
41⁄4"Dia.
41⁄4"Dia.
Plain
Adhesive
Plain
Adhesive
Plain
Adhesive
Banded in 100’s
Banded in 100’s
Banded in 100’s
Banded in 100’s
Banded in 100’s
Banded in 100’s
SHELF MANAGEMENT |
Label Holders
USE
3
WAYS
9510-D1
with DAF-1
9510-D2
with DAF-2
Tri-Barker 90° Shelf Bracket
Clip Supplied, Unassembled
Please specify type of clip:
(DAF-1) Short for Merchandising Strips
(DAF-2) Long for Coupon Pads
White, super strong, glass
filled nylon with uniqe doubleended arrowhead clip, to
attach accessories and
secure them firmly.
Packed: 50 Unassembled
2383
Versa Clip
.020" clear PVC.
With adhesive strip.
2381
1/2" Stem
Arrowhead Fastener
Drill 9/32" hole.
Packed: 1,000
2381-A
1/2" Stem
Arrowhead Fastener
Natural polypropylene. Fits 1-1/4"
price channels. Drill 9/32" hole.
With permanent adhesive pad
applied. For use on flat surfaces.
Packed: 500
2380
7/8" Stem
Arrowhead Fastener
Drill 9/32" hole.
Packed: 1,000
58
SHELF MANAGEMENT |
59
Label Holders
2279-LS
4" Lock Strip
Display Loop
With permanent adhesive and
4" locking strap. Set includes:
#2279 (Mobile button) and
#8432 (4" Lock Strap)
Packed: 100
2121-A
1" Long
White polypropylene. With
adhesive. Fits 1-1/4" price
channels, wire fixtures
and cut cases.
Packed: 250
SFCUSTOM2
Shelf Flag (pre-printed)
3-3/8" H x 2-3/4" W with
3"W x 1-3/4"H Flag
0.012" gauge PVC.
Accomodates most standard
1.25" price channels and data
tracs. Printed in full color with
your logo or sales message.
Packed: 25
SFCUSTOM3
Shelf Flag (pre-printed)
2-3/4" H x 3-3/8" W with
3"W x 1-3/4"H flag and
1-1/4" pocket
0.012" gauge PVC.
Accomodates most standard
1.25" price channels and data
Packed: 25
STCUSTOM1
Shelf Talker (pre-printed)
3-1/2"H x 2"W
0.012" gauge PVC.
These flush mount shelf talkers
can accomodate most standard
1.25" shelf channels and data
Packed: 25
STCUSTOM2
3-1/4"H x 3-1/2"W
0.012" gauge PVC.
Packed: 25
STCUSTOM3
3-1/4"H x 5"W
0.012" gauge PVC.
Packed: 25
LITERATURE HOLDERS |
Deluxe Series
•
•
•
•
•
Table / Countertop
Top entry – sealed on three sides
All edges radiused and polished
Printed inserts are totally enclosed
Wide range of sizes and styles to choose from
Can be imprinted with your logo or sales message
Easel Style Print Holder
Clear styrene
Slot in base for easy print removal
Patented: US Pat 6,415,537 U.S. Des. 370,355 / 396,562
Part No.
TVE-1
TVE-4
TVE-2
TVE-3
Wide High
8 ⁄2"
8"
5"
4"
1
11"
10"
7"
6"
Packed
Ctn. 25
Ctn. 25
Ctn. 50
Ctn. 100
T-Style Print Holder
Clear styrene
Part No.
TVT-1
TVT-3
Wide High
8 ⁄2"
4"
1
11"
6"
Packed
Ctn. 20
Ctn. 100
Y-Style Print Holder
Clear styrene
Top Entry
Part No.
TVY-1
TVY-3
Wide High
8 ⁄2"
4"
1
11"
6"
Packed
Ctn. 12
Ctn. 100
60
Table / Countertop
Curved Easel Style Print Holder
Clear acrylic. Features and elegant design with a removable
magnetic face plate that secures your signage in place and
allows for effortless print changes.
Part No.
4300101CI
4300201CI
4300601CI
For Sheet Size
31⁄2"W x 5"H
4"W x 6"H
5"W x 7"H
Color Packed
Clear
Clear
Clear
Ctn. 32
Ctn. 28
Ctn. 20
Thick Premium Sign Holders
3/4" clear acrylic sign holder / photo frame. Panels snap together
with magnets, holding literature or photo in place.
Part No.
4300301CI
4300401CI
4300501CI
For Sheet Size
3 ⁄2"W x 5"H
4"W x 6"H
5"W x 7"H
1
Color Packed
Clear
Clear
Clear
Ctn. 8
Ctn. 8
Ctn. 12
Easel Style Print Holders
Removable silver knobs allow for a vertical or horizontal display.
Provides the elgant look of glass. Sleek and sophisticated;
durable and lightweight. Securely floats signage without the
worry of it slippping out.
Part No.
799483CI
799583CI
799683CI
For Sheet Size
4"W x 6"H
5"W x 7"H
81⁄2"W x 11"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Curved Easel Style Print Holders
Removable silver knobs allow for a vertical or horizontal display.
Provides the elgant look of glass. Sleek and sophisticated;
durable and lightweight. Securely floats signage without the
worry of it slippping out. 799783CI has green tinted edges.
Part No.
799383CI
799783CI
For Sheet Size
81⁄2"W x 11"H
81⁄2"W x 11"H
Color Packed
Clear
Clear
Ctn. 8
Ctn. 8
Green Edge Sign Holders
Polished, rounded green-tinted edges. Features both bottom
and side-load capabilities.
Part No.
5991790CI
5991890CI
5991990CI
For Sheet Size
81⁄2"W x 11"H
11"W x 81⁄2"H
14"W x 11"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Detachable T-Shape Sign Holder
Clear acrylic sign holder. Literature slides in from the side.
Removable black base.
Part No.
TM06-1245CI
61
For Sheet Size
37⁄8"W x 81⁄4"H
Color Packed
Clear
Ctn.18
Table / Countertop
Curved Sign Holders
Panels snap together with magnets. Clear back panel allows
for convex or concave display. Black back panel creates a
permanent black border.
CLEAR BACK
Part No.
680101CI
680201CI
680301CI
For Sheet Size
6"W x 4"H
7"W x 5"H
11"W x 81⁄2"H
Color Packed
Clear
Clear
Clear
Ctn. 28
Ctn. 6
Ctn. 6
BLACK BACK
Part No.
680175CI
680275CI
680375CI
For Sheet Size
6"W x 4"H
7"W x 5"H
11"W x 81⁄2"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Black Border Sign Holders
Permanent black border frames printed materials.
Slanted design. Literature slides in from the side.
Part No.
69575CI
69775CI
66775CI
For Sheet Size
5"W x 7"H
81⁄2"W x 11"H
11"W x 81⁄2"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Swivel Sign Holders
Sign holder rotates and base stays stationary. Signs can be
displayed on both sides. Green tinted edges give the look
of real glass.
Part No.
691390CI
691490CI
691590CI
For Sheet Size
4"W x 6"H
5"W x 7"H
81⁄2"W x 11"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Oval Base T-Shape Sign Holders
Clear acrylic sign holder. Literature slides in from the top or side.
TM06-1102CI has a black base, TM06-1102CSCI has a clear base.
Part No.
TM06-1102CI
TM06-1102CSCI
For Sheet Size
37⁄8"W x 81⁄4"H
37⁄8"W x 81⁄4"H
Color Packed
Clear
Clear
Ctn. 24
Ctn. 24
2-Ring Menu Holder
Clear acrylic with modern purple colored base.
Comes with 6 sleeves.
Part No.
HK-05-0620-2CI
For Sheet Size
4"W x 6"H
Color Packed
Clear
Ctn. 24
62
Table / Countertop
Premium Series
Style A – Slanted
Clear styrene. Side entry. Protects your signs from stains, scratches
and tears. AHS-A-CS-55CGP has a business card holder attached.
AHS-ACI-8.5x11W4 is with cutout pocket 4.
Part No.
Wide High Color Packed
AHS-A-5x3
AHS-A-3.5x5
AHS-A-5x7
AHS-A-7x5
AHS-A-6x8
AHS-A-8.5x11
AHS-A-11x8.5
AHS-A-11x14
AHS-A-14x11
AHS-A-17x11
AHS-A-14x11w/pkt 4
AHS-A-8.5x11w/pkt4
AHS-A-CS-55CI
AHS-ACI-8.5x11 W4
5"
31⁄2"
5"
7"
6"
81⁄2"
11"
11"
14"
17"
14"
81⁄2"
81⁄2"
131⁄8"
3"
5"
7"
5"
8"
11"
81⁄2"
14"
11"
11"
11"
11"
11"
11"
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Ctn. 216
Ctn. 168
Ctn. 96
Ctn. 96
Ctn. 60
Ctn. 36
Ctn. 48
Ctn. ?
Ctn. 24
Ctn. 24
Ctn. 18
Ctn. 18
Ctn. ?
Ctn. ?
Premium Series
Style B – Stand-Up
Clear styrene. Top load. Protects your signs from stains, scratches and tears.
Part No.
AHS-B-3.5x5
AHS-B-4x6
AHS-B-5x7
AHS-B-6x8
AHS-B-8x10
AHS-B-8.5x11
AHS-B-11x8.5
31⁄2"
4"
5"
6"
8"
81⁄2"
11"
5"
6"
7"
8"
10"
11"
81⁄2"
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Ctn. 168
Ctn. 64
Ctn. 64
Ctn. 48
Ctn. 24
Ctn. 24
Ctn. 24
Premium Series
Style C – Stand-Up
Clear styrene. Bottom load. Protects your signs from stains, scratches and tears.
Part No.
AHS-C-4x5
AHS-C-4x6
AHS-C-5x7
AHS-C-8x10
AHS-C-8.5x11
4"
4"
5"
8"
81⁄2"
5"
6"
7"
10"
11"
Clear
Clear
Clear
Clear
Clear
Ctn. 90
Ctn. 60
Ctn. 64
Ctn. 36
Ctn. 24
Premium Series
Style D
Clear styrene. Top load. Protects your signs from stains, scratches and tears.
Part No.
AHS-D-4x6
AHS-D-5x7
63
4"
5"
6"
7"
Clear
Clear
Ctn. 6
Ctn. 15
Table / Countertop
Premium Series
Style E
Clear styrene. Top or side entry. Protects your signs from stains, scratches and tears.
Part No.
AHS-E-4x6
AHS-E-5x7
4"
5"
6"
7"
Clear
Clear
Ctn. 84
Ctn. 24
Premium Series
Style F
Clear styrene. Side entry. Protects your signs from stains, scratches and tears.
Part No.
AHS-F-4x6
AHS-F-5x7
AHS-F-6x4
AHS-F-11x3.5
4"
5"
6"
11"
6"
7"
4"
31⁄2"
Clear
Clear
Clear
Clear
Ctn. 48
Ctn. 48
Ctn. 60
Ctn. 12
Premium Series
Style G – Three-Sided
Clear styrene. Top entry. Protects your signs from stains, scratches and tears.
Part No.
AHS-G-4x6
AHS-G-5x7
4"
5"
6"
7"
Clear
Clear
Ctn. 64
Ctn. 12
Lite Series
Style A – Slanted
Clear styrene. Side entry.
Protects your signs from stains, scratches and tears.
Part No.
AHS-AL-3.5x5
AHS-AL-5x7
AHS-AL-8.5x11
AHS-AL-11x8.5
31⁄2"
5"
81⁄2"
11"
5"
7"
11"
81⁄2"
Clear
Clear
Clear
Clear
Ctn. 174
Ctn. 120
Ctn. 48
Ctn. 54
Lite Series
Style B – Stand-Up
Clear styrene. Top load.
Part No.
AHS-BL-4x6
AHS-BL-5x7
AHS-BL-8.5x11
4"
5"
81⁄2"
6"
7"
11"
Clear
Clear
Clear
Ctn. 68
Ctn. 64
Ctn. 24
Lite Series
Style C – Stand-Up
Clear styrene. Bottom load.
Part No.
AHS-CL-4x6
AHS-CL-5x7
AHS-CL-8.5x11
AHS-CL-11x8.5
4"
5"
81⁄2"
11"
6"
7"
11"
81⁄2"
Clear
Clear
Clear
Clear
Ctn. 64
Ctn. 64
Ctn. 24
Ctn. 24
64
Ship Flat Models
• Attractive, molded Tru•Vu® Print Holders are sealed on three sides
• Detachable base – SHIPS FLAT!
• Choose Easel or T-Style
• Wide range of sizes and styles available in portrait
or landscape style
• Can be imprinted with your logo or sales message
T-Style Portrait / Landscape Print Holder
Detachable Base
Clear styrene
Part No.
TVT-1SV
TVT-1SH
TVT-4SV
TVT-4SH
TVT-2SV
TVT-2SH
TVT-3SV
TVT-3SH
Wide High
81⁄2"
11"
8"
10"
5"
7"
4"
6"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
Packed
Ctn. 25
Ctn. 25
Ctn. 25
Ctn. 25
Ctn. 75
Ctn. 75
Ctn. 150
Ctn. 150
Easel Style Portrait / Landscape Print Holder
Detachable Base
Clear styrene
Part No.
TVE-1SV
TVE-1SH
TVE-4SV
TVE-4SH
TVE-2SV
TVE-2SH
TVE-3SV
TVE-3SH
Wide High
81⁄2"
11"
8"
10"
5"
7"
4"
6"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
Packed
Ctn. 25
Ctn. 25
Ctn. 25
Ctn. 25
Ctn. 75
Ctn. 75
Ctn. 150
Ctn. 150
Snaplock Sign Holder – Counter or Wallmount
Clear styrene. Built-in easel and wall hook.
Includes black mat for floating signage effect.
Part No.
SSH-1
SSH-2
SSH-3
65
Wide High
8 ⁄2"
1
5"
4"
11"
7"
6"
Packed
Ctn: 25
Ctn: 50
Ctn: 20
Wall Mount
Tru•Vu® Wallmount Print Holder
Clear styrene. Top entry – sealed on three sides.
Key hole slots for wallmounting.
Slot in base for easy print removal.
TVW-1V
V – Vertical
Part No.
Wide High
TVW-1V
TVW-1H
TVW-4V
TVW-4H
TVW-5**
TVW-H
H – Horizontal
81⁄2"
11"
8"
10"
81⁄2"
Packed
11"
81⁄2"
10"
8"
11"
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 8
Wall Mount Beveled Green Edge Sign Holders
Can be displayed horizontally or vertically. Mounting hook is
placed behind signage to keep hardware hidden.
Part No.
691090CI
691190CI
691290CI
For Sheet Size
4"W x 6"H
5"W x 7"H
81⁄2"W x 11"H
Color Packed
Clear
Clear
Clear
Ctn. 14
Ctn. 12
Ctn. 8
Wall Mount Black Border Sign Holders
**With front pocket for
brochures up to 4” wide
Mounting hook is placed behind signage to keep hardware hidden.
Part No.
68575CI
68775CI
68875CI
For Sheet Size
7"W x 5"H
81⁄2"W x 11"H
11"W x 81⁄2"H
Color Packed
Clear
Clear
Clear
Ctn. 6
Ctn. 6
Ctn. 6
Premium Series
Style W – Wall Mount
Clear styrene. Side or top entry. With predrilled holes.
Part No.
AHS-W-8.5x11
AHS-W-11x8.5
AHS-W-11x14
AHS-W-14x11
AHS-W-11x17
AHS-W-17x11
AHS-W-8.5x11w/pkt 4
AHS-W-14x11w/pkt 4
AHS-W-8.5x11w/Z Bar
AHS-W-11x8.5w/Z Bar
AHS-W-11x8.5w/CS-55CGP
81⁄2"
11"
11"
14"
11"
17"
81⁄2"
14"
81⁄2"
11"
11"
11"
81⁄2"
14"
11"
17"
11"
11"
11"
11"
81⁄2"
81⁄2"
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Ctn. 36
Ctn. 36
Ctn. 12
Ctn. 24
Ctn. 12
Ctn. 12
Ctn. 18
Ctn.
Ctn.
Ctn.
Ctn.
Lite Series
Style W – Wall Mount
Clear styrene. Side or top entry. With predrilled holes.
Part No.
AHS-WL-8.5x11
AHS-WL-11x8.5
81⁄2"
11"
11"
81⁄2"
Clear
Clear
Ctn. 40
Ctn. 40
66
Pegboard / Adhesive / Magnetic
Tru•Vu® Pegboard Print Holder
Clear styrene.
Top entry – sealed on three sides.
Can be imprinted with your logo or sales message,
contact our sales desk for a quote.
TVP-H
H – Horizontal
TVP-V
V – Vertical
Part No.
**With front pocket
for brochures up
to 4" wide
TVP-1V
TVP-1H
TVP-4V
TVP-4H
TVP-2V
TVP-2H
TVP-3V
TVP-3H
TVP-5**
Wide High
81⁄2"
11"
8"
10"
5"
7"
4"
6"
81⁄2"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
11"
Packed
Ctn: 25
Ctn: 25
Ctn: 20
Ctn: 20
Ctn: 50
Ctn: 50
Ctn: 100
Ctn: 100
Ctn: 12
Tru•Vu® Adhesive Print Holder
Clear styrene.
With foam adhesive pad.
TVA-V
V – Vertical
Part No.
TVA-H
H – Horizontal
TVA-8V
V – Vertical
TVA-1V
TVA-1H
TVA-4V
TVA-4H
TVA-2V
TVA-2H
TVA-3V
TVA-3H
TVA-8V
Wide High
8 ⁄2"
1
11"
8"
10"
5"
7"
4"
6"
81⁄2"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
2"
Packed
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 75
Ctn: 75
Ctn: 100
Ctn: 100
Ctn: 100
Tru•Vu® Magnetic Print Holder
Clear styrene.
With magnetic strips.
Part No.
TVM-V
V – Vertical
TVM-H
H – Horizontal
TVM-8V
V – Vertical
67
TVM-1V
TVM-1H
TVM-4V
TVM-4H
TVM-2V
TVM-2H
TVM-3V
TVM-3H
TVM-8V
Wide High
8 ⁄2"
1
11"
8"
10"
5"
7"
4"
6"
81⁄2"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
2"
Packed
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 20
Ctn: 75
Ctn: 75
Ctn: 100
Ctn: 100
Ctn: 100
Plain / Optional Attachments
Tru•Vu® Plain Print Holder
Clear styrene. Top entry – sealed on three sides.
Part No.
TVF-1
TVF-4
TVF-2
TVF-3
TVF-5**
TVF-8
**With front pocket
for brochures up
to 4" wide
Wide High
8 ⁄2"
1
8"
5"
4"
81⁄2"
81⁄2"
11"
10"
7"
6"
11"
2"
Packed
Ctn: 25
Ctn: 25
Ctn: 75
Ctn: 150
Ctn: 12
Ctn: 135
Tru•Vu® Print Holder with
Velcro® Brand Fasteners
(Hooks & Loops)
Clear styrene.
Part No.
TV-1V V
TV-4V V
TV-2V V
TV-3V V
TV-8V
Wide High
8 ⁄2"
1
8"
5"
4"
81⁄2"
11"
10"
7"
6"
2"
Packed
Ctn: 20
Ctn: 20
Ctn: 75
Ctn: 100
Ctn: 100
**With front pocket
for brochures up
to 4" wide
Tru•Vu® Slatwall Print Holder
Clear styrene.
TVS-H
H – Horizontal
Part No.
TVS-V
V – Vertical
TVS-1V
TVS-1H
TVS-4V
TVS-4H
TVS-2V
TVS-2H
TVS-3V
TVS-3H
TVS-5**
Wide High
81⁄2"
11"
8"
10"
5"
7"
4"
6"
81⁄2"
11"
81⁄2"
10"
8"
7"
5"
6"
4"
11"
Packed
Ctn: 25
Ctn: 25
Ctn: 20
Ctn: 20
Ctn: 50
Ctn: 50
Ctn: 100
Ctn: 100
Ctn: 12
68
Optional Attachments / Soft PVC Pouches
Special Pockets
BPR-3
Clear pocket attachment. Please specify styrene or acrylic.
Part No.
BPR-4
69
BPR-5
BPR-3
BPR-4
BPR-5
33⁄4"
4"
5"
43⁄4"
43⁄4"
23⁄4"
Clear
Clear
Clear
Ctn. 100
Ctn. 120
Ctn. 198
ADH-1
Foam Adhesive Pads
Strong permanent adhesive.
Attaches to most smooth surfaces.
3"W x 3/4"H x 1/32"thick
Installation Included
Z CHANNEL
Z Channel Slatwall Bracket
White styrene. Fits most standard
slatwall. Two might be required
for larger units.
PEGBOARD BRACKET
Pegboard Bracket
Clear styrene. Fits standard 1/4"
pegboard. Two might be required
for larger units.
R CLIP
R Clip for Wire
White acrylic. For wire. Up to
5" wide installed with tape.
9720
5" x 1-1/4"
UPC Tag Holder
Clear PVC.
5" wide protective pouch.
Opens from side.
Two holes for easy attachment.
For sheet size 5" x 1-1/4".
Packed: Bulk
9722
5" x 3"
Flexible Tag Holder
Clear PVC.
Opens on 3" edge.
Plain, with mounting hole
for easy attachment.
For sheet size 5" x 3".
Packed: Bulk
9724
5-1/2" x 3-1/2"
Flexible Tag Holder
Clear PVC.
Opens on 3-1/2" edge.
With adhesive strip at top,
for easy attachment.
For sheet size 5-1/2" x 3-1/2".
Packed: Bulk
TVE-5
8-1/2" x 11"
Tru•Vu® Easel Style Print
Holder w/Brochure Pocket
TVE-6
8-1/2" x 11"
Holder w/Business Card Pocket
TVE-7
4" x 6"
Holder w/Business Card Pocket
Print / Brochure Combo Holders
Clear styrene.
Holds sheet size 8-1/2" x 11".
With 4” wide brochures
in front pocket.
Carton: 15
Clear styrene.
With 3-1/2" wide business
cards in front pocket.
Carton: 15
Clear styrene.
Holds sheet size 4" x 6".
With 3-1/2" business cards.
Carton: 30
TVE-10
8-1/2" x 11"
Tru•Vu® Countertop Side-bySide Print Holder w/Literature
Pocket
Clear styrene.
With 4” wide brochures
in side pocket.
Carton: 10
TVB-1
8-1/2" x 11"
Tru•Vu® All-In-One Print
Holder
TVT-5
8-1/2" x 11"
Tru•Vu® T-Style Print Holder
w/Brochure Pocket
Clear styrene.
Holds 8-1/2" x 11" backer
sheet, 8-1/2" x 11" brochures
and business cards – all-in-one.
Last copy is always protected.
Carton: 10
Clear styrene.
With front pocket for brochures
up to 4" wide, on one side only.
Carton: 20
Clear styrene.
With front pocket for business
cards up to 3-1/2" wide, on
one side only.
Carton: 20
BCT-1
7-1/2" x 3-1/2"
Desktop Nameplate /
Business Card Holder
Clear acrylic.
Holds sheet size 7-1/2" x 3-1/2"
and two standard 3-1/2" x 2"
business cards.
Packed: Polybag
TVT-6
8-1/2" x 11"
Tru•Vu® T-Style Print Holder
w/Business Card Pocket
70
Ballot & Coin Boxes
FAC-1 – No Lock
FAC-1L – With Lock
Mini Coin / Ballot Box
FAC-2 – No Lock
with Header Card Holder
FAB-1 – No Lock
FAB-1L – With Lock
Jumbo Ballot Box
FAB-2 – No Lock
Jumbo Ballot Box
71
Clear acrylic. Approximate overall
size: 5-7/8"W x 3-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: Polybag
Clear acrylic. Header card holder
takes card size 6"W x 4"H.
Approximate overall size:
5-7/8"W x 8-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: Polybag
size: 11-1/2'W x 9-1/2"H x 8-1/2"D
4-1/4" wide slot.
Packed: Polybag
takes card size 11"W x 8-1/2"H.
11-1/2'W x 18"H x 8-1/2"D
4-1/4" wide slot.
Packed: Polybag
MBS-C1CI
Mini Coin Box
Clear styrene. Create interest in
give-aways and charities. Overall
size: 5"W x 3"H x 3-1/4"D
Packed: 7
MBS-C3CI
Mini Coin Box with
Header Card and Lock
Clear Lexan. Header card accepts
card size 5" wide x 7" high
Includes a set screw lock. Overall
size: 5"W x 10-5/16"H x 3-1/4"D
Packed: 7
Ballot & Coin Boxes
CBS-S
Ballot Box with Lock
Smoked acrylic. Locks on bottom.
Ensures privacy of its contents.
Optional pocket attachments
available at additional cost.
Overall size:
6-1/2"W x 8"H x 6-1/4"D.
Packed: 12
66001CI
Ballot Box with Header Card
Clear acrylic. Header card accepts
card size 8"W x 7"H. Optional
pocket attachments available
at additional cost. Overall size:
8"W x 8"H x 8"D
Packed: 2
66101CI
Ballot Box
Clear acrylic. Overall size:
8"W x 8"H x 8"D
Packed: 2
66201CI
Drop Box with Sign Holder
and Pocket
size: 5-7/8"W x 3-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: 6
CBS-H
Header for CBS-S
Optional clear header. Holds
material up to 6"W x 8"H.
Packed: 40
CBS-HD
Header for CBS-C
Optional clear header. Holds
material up to 6"W x 8"H.
Packed: 40
72
73
Ballot & Coin Boxes
592901CI
Coin Box
Clear acrylic. Optional pocket
attachments available at
additional cost. Overall size:
6-3/8"W x 3-13/16"H x 4-1/4"D.
Packed: 6
66501CI
Coin Box
5-1/8"W x 3"H x 3-3/8"D.
Packed: 9
66601CI
Coin Box with Lock
Clear acrylic. Locks on back.
available at additional
cost. Overall size:
5-1/8"W x 3"H x 3-3/8"D.
Packed: 2
CBS-2C
Ballot Box with Cable Tie
4-1/2"W x 5-3/4"H x 4-1/2"D.
Packed: 9
CBS-C
Ballot Box with Top Lock
Clear acrylic. Locks on top.
cost. Overall size:
6-3/4"W x 5"H x 8-3/4"D.
Packed: 12
CBS-C w/PKT4
and Side Pocket
ost. Overall size:
6-3/4"W x 5"H x 8-3/4"D.
Packed: 12
Illuminated Poster Frames & Light Boxes
PG1824
Plug n' Glo Illuminated Klik
Frame – 18" x 24"
LED backlit frame accepts a
print size of 18" x 24". White
metal body and aluminum frame
face that snaps open allowing for
easy poster changes. Ideal for wall
mount and hanging applications.
Hanging kit and printed sign
sold separately.
Packed: 1
PG2228
Frame – 22" x 28"
LED backlit frame accepts a
print size of 22" x 28". White
metal body and aluminum frame
face that snaps open allowing for
easy poster changes. Ideal for wall
mount and hanging applications.
sold separately.
Packed: 1
PG2436
Frame – 24" x 36"
Aluminum body and aluminum
snapframe face that snaps open
allowing for easey poster changes.
Free standing illuminated frame is
ideal for lobbies, trade shows and
retail environments. Printed sign is
sold separately.
Packed: 1
PG2228FS
Frame Floor Stand – 22" x 28"
Aluminum body and aluminum
snapframe face that snaps open
allowing for easey poster changes.
Free standing illuminated frame is
ideal for lobbies, trade shows and
retail environments. Printed sign is
sold separately.
Packed: 1
PGIFF1824
Plug n' Glo Illuminated Flex
Frame – 18" x 24"
Fluorescent tube backlit lightbox
accepts a print size of 18" x 24".
Its composed of a sturdy metal
body and has a flexible face
allowing for easy poster changes.
are sold separately.
Packed: 1
PGIFF2436
Plug n' Glo Illuminated Flex
Frame – 24" x 36"
Fluorescent tube backlit lightbox
accepts a print size of 24" x 36. Its
composed of a sturdy metal body
and has a flexible face allowing
for easy poster changes. Hanging
kit and printed sign are sold
separately.
Packed: 1
74
75
Illuminated Poster Frames & Light Boxes
PGCWL2436
Plug n' Glo Curved Wall
Light – 24" x 36"
Fluorescent tube backlit curved
lightbox accepts a print size of
24" x 36". Its composed of a
sturdy metal body and has a
flexible face allowing for easy
poster changes. Hanging kit
and printed sign are sold
separately.
Packed: 1
PGLED2228
Plug n' Glo LED Light Box –
22" x 28"
LED backlit lightbox accepts a
print size 22" x 28". It has a very
durable all steel contruction that is
2" in depth. Print changes are easy
by removing the front magnetic
protective face. Hanging kit and
printed sign are sold separately.
Packed: 1
PR18
Backlit Poster Insert –
18" x 24"
Printed poster for backlit
applications. Full color, high
resolution digital print on a poly
substrate. Fade and water
resistant.
Packed: 1
PR22
22" x 28"
resistant.
Packed: 1
PR24
24" x 36"
resistant.
Packed: 1
PGHK1
Hanging Kit
Kit contains 4 hooks, 2 chains –
30" Long, 90° brackets and 2 tek
screws. Can be used with Plug n'
Glo Flex Frame, Curved Wall Light
and LED Light Box.
Packed: 2
Poster Frames & Banner Stands
Wall Mount Klik-Frame
Satin aluminum frame with clear plastic print protector. 1 sided.
Front loading. Use horizontally or vertically. Mounting hardware
included. Available in custom sizes from 8-1/2" x 11" to 48" x 60".
Colors also available – subject to minimum quantities.
Part No.
WF-8511
WF-1117
WF-1722
WF-1824
WF-2228
WF-2436
Wide High
8 ⁄2"
11”
17"
18"
22"
24"
1
11"
17”
22"
24"
28"
36"
Packed
Individual Carton
Individual Carton
Individual Carton
Individual Carton
Individual Carton
Individual Carton
Hanging Klik-Frame
Satin aluminum frame with clear plastic print protector. 2-sided.
Front loading. Use horizontally or vertically. Mounting hardware
included. Available in custom sizes from 8-1/2" x 11" to 30" x 40".
Colors also available – subject to minimum quantities.
Part No.
HF-1722
HF-1824
HF-2228
HF-2436
Wide High
17"
18"
22"
24"
22"
24"
28"
36"
Packed
Individual Carton
Individual Carton
Individual Carton
Individual Carton
Two-Sided Revolving Floor Stand Klik-Frame
Satin aluminum frame with clear plastic print protector. 2-sided.
Front loading. Use horizontally or vertically. Available in custom
sizes from 8-1/2" x 11" to 30" x 40". Colors also available –
subject to minimum quantities.
Part No.
FF-1722
FF-1824
FF-2228
Wide High
17"
18"
22"
22"
24"
28"
Packed
Individual Carton
Individual Carton
Individual Carton
76
9750W
8-1/2" x 11" – White
9750R
8-1/2" x 11" – Red
9750G
8-1/2" x 11" – Grey
Free Standing / Wall Mount
'Pop-In' Poster Holder
BBD-1W
9-1/2" x 23-1/2" – White
BBD-1G
9-1/2" x 23-1/2" – Grey
Bulletin Board with
Leaflet Pocket
BBD-4W
20" x 26" – White
BBD-4G
20" x 26" – Grey
Bulletin Board
77
Molded plastic frame with clear
plastic overlay. Supplied with two
detachable feet. Use horizontally
or vertically. Frame colors: White,
Red or Grey. Other colors available.
Subject to minimum quantity.
Packed: Polybag
White or grey back panel with
clear plastic front covers. Holds one
8-1/2" x 11" sheet with an 8-1/2"
wide pocket for leaflets. Mounting
hardware included. Custom sizes,
designs and colors available.
Subject to minimum quantities.
Packed: Individual Carton
White or grey back panel with
clear plastic front covers. Holds four
8-1/2" x 11" sheets. Mounting
hardware included.
Packed: Individual Carton
RO-6X 8511
Insta-Frame Display Cube
6 Sides – 8" x 8"
Silver, lightweight aluminum
frame (round profile). Accepts
prints 8" x 8". Tripod base to
form 6 sided display cube. Easy
to assemble.
Packed: Bulk
TE-2X 2228
Insta-Frame Double Floor
Stand – 22"W up to 72"H
frame. Accepts prints 22"W up
to 72"H. Two modular cross bars
allow you to position them where
desired to accomodate varying
print heights. Floor stand frame
can be ajusted to a T style or Easel
style with modular base bars.
Easy to assemble.
Packed: Bulk
TE-2X 2822
Insta-Frame Double Floor
Stand – 28"W up to 72"H
frame. Accepts prints 28"W up
to 72"H. Two modular cross bars
allow you to position them where
desired to accomodate varying
print heights. Floor stand frame
can be ajusted to a T style or Easel
style with modular base bars.
Easy to assemble.
Packed: Bulk
TE-1722
Insta-Frame Floor Stand
17"W x up to 48"H
Silver lightweight aluminum
frame Modular cross bar allows
you to position it where desired
to accomodate print height. Floor
stand frame can be adjusted to a T
style or Easel style with modular
base bars. Easy to assemble.
Packed: Bulk
TE-1824
18"W x up to 48"H
Packed: Bulk
TE-2228
22"W x up to 48"H
Packed: Bulk
TE-2436
24"W x up to 48"H
Packed: Bulk
TE-3672
36"W x up to 48"H
Packed: Bulk
TE-4872
48"W x up to 72"H
Packed: Bulk
TE-4896
48"W x up to 96"H
Packed: Bulk
78
79
AF-4872
Insta-Frame Deluxe Profile
Wall Mount – 48" x 72"
Silver lightweight aluminum frame.
Use horizontal or vertical. Easy
to assemble. Mounting hardware
included. Can be converted for
window or hanging application.
Conversion accessories sold
separately.
Packed: Bulk
AF-4896
Insta-Frame Deluxe Profile
separately.
Packed: Bulk
EC-1117
Insta-Frame Econo Profile
separately.
Packed: Bulk
EC-1722
separately.
Packed: Bulk
EC-1824
separately.
Packed: Bulk
EC-2436
separately.
Packed: Bulk
EC-8511
Wall Mount – 8-1/2" x 11"
separately.
Packed: Bulk
IBL100
Insta-Banner – L Banner Stand
Sturdy aluminum base and
pole. Accepts a banner size of
90cm x 215cm. Easy set up and
take down. Carrying case included.
Printed banner not included.
Packed: Individual
IBL100P
Insta-Banner – L Banner Stand
with Printed Banner
Sturdy aluminum base and
pole. Accepts a banner size of
90cm x 215cm. Easy set up and
take down. Carrying case and full
color printed banner included.
Packed: Individual
IBRU100
Insta-Banner – Roll Up
Banner Stand
Single sided retractable banner
stand. Aluminum base and pole.
Banner size: 85cm x 200cm.
Easy set up and take down.
Carrying case included.
Banner not included.
Packed: Individual
IBRU100P
Insta-Banner – Roll Up
Banner Stand with
Printed Banner
Single sided retractable
banner stand. Aluminum base and
pole. Banner size: 85cm x 200cm.
Carrying case and full color
printed banner included.
Packed: Individual
IBRU110
Insta-Banner – Double Sided
Roll Up Banner Stand
Double sided retractable
Carrying case included.
Banner not included.
Packed: Individual
IBRU110P
Insta-Banner – Double Sided
Roll Up Banner Stand
with Printed Banner
Double sided retractable
Carrying case and full color
printed banner included.
Packed: Individual
IBX100
Insta-Banner – X Banner Stand
Sturdy 3 leg aluminum base.
Accepts banner 60cm x 160cm.
Screwposts at each corner anchor
banner. Banner must have grommets
in each corner. Carrying case
included. Banner not included.
Packed: Bulk
IBX100P
Insta-Banner – X Banner Stand
with Printed Banner
Sturdy 3 leg aluminum base.
Accepts banner 60cm x 160cm.
Screwposts at each corner anchor
banner. Banner must have grommets
in each corner. Carrying case and full
color printed banner included.
Packed: Bulk
80
81
Poster Frames & Banner Stands / Plastic Easels
WSB-2436
Window Banner System
24" x 36"
Window banner system holds
a banner and attaches to any
glossy surface such as tile or glass.
7 pc. hardware set utilizes high
power suction eliminating the
need for adhesive. Printed
banner not included.
Packed: 25
1406
6" High
Plastic Showcard Easel
With permanent adhesive strip.
0.055" white polyethylene.
Stronger and much more durable
than cardboard easels.
Packed: Bulk
1408
8" High
Packed: Bulk
1410
10" High
Packed: Bulk
1414
14" High
Packed: Bulk
HANGING DISPLAY ACCESSORIES |
Magnetic Ceiling Display System
MGM94290
Single MagMover
Single MagMover allows for
a single suspension point. Perfect
for small items such as hanging
mobiles that can rotate in air
currents.
Packed: Bulk
MGM10402
Dual MagMover
The Dual MagMover provides
up to two suspension points.
Great for signs and most P.O.P.
displays. Note: RingMagnets can
be placed on the posts so displays
can be suspended from walls,
as well as ceilings.
Carton: 1
MGM10406
Multi MagMover
The Multi MagMover provides up
to six points. Choose it for long
banners, garlands, fabric draping
or stringing twinkle lights across
the ceiling.
Carton: 1
MGM11704
Pole Extender
The pole extender is 4' (ft.) /
1.22m and contains an external
thread on one end and an internal
thread on the other. Join as many
as needed to reach even greater
heights.
Carton: 1
MGM18000
MagPole
Extends to 18' (ft.)
Sturdy aluminum and fiberglass
extension pole specifically
designed for the display industry.
5 telescopic sections allow for a
height range 5'3" to 18' (ft.).
Carton: 1
MGM94288
Regular RingMagnet
Holds up to 5 lbs / 2 kg.
Small powerful magnets with
rings to allow for easy installation
and removal. Use with any of our
MagMover styles. Priced per bag.
Packed: 20/Bag
MGM95270
Super RingMagnet
Holds up to 10 lbs / 4 kg.
Small powerful magnets with
rings to allow for easy installation
and removal. Use with any of our
MagMover styles. Priced per bag.
Packed: 10/Bag
82
83
Hanging Accessories
8602
Triad
Natural polypropylene. 2 piece set.
For panels up to 9" to 40" wide.
Packed: Bulk
8601S
Mini Tri-A-Rama
Natural polypropylene. 2 piece set
plus T-bar hook with barbed line.
For sheets from 10" to 24" wide.
Packed: Poly bagged in sets
8601L
Large Tri-A-Rama
8603
Quad-A-Rama
568
Swivel Ceiling Hook
White polypropylene. Snaps onto
standard 1" ceiling grids. Slides
into track on InstaGrip Banner
Hanger/Atlas Heavy Duty Banner
Hanger/InstaGrip Orion Banner
Hanger/InstaGrip Heavy Duty
Hinged Banner Tube.
Packed: 250
2279
Mobile Button
White styrene. 3/4" x 3/4" base.
3/16" loop. Permanent adhesive.
Packed: 500
7103
Ceiling Clip
Natural nylon. 3/4" x 3/4" base.
3/16" loop. Snaps onto T-bar.
Packed: 500
2277
Ceiling Hook
White Acetal. 3/4" x 1/8" base.
Snaps onto T-bar.
Packed: 500
Hanging Accessories
7004
Plastic Hook
White ABS. With 4ft. barbed cord.
Clips to ceiling grids and fixtures.
Packed: 100
7020
Mobile Spiral
Stretchable steel wire.
Stretches up to 4ft.
Packed: 100
7040
Mobile Spiral
Stretches up to 5ft.
Packed: 50
7060
Mobile Spiral
Stretches up to 9.5ft.
Packed: 25
7050
Nylon Hanger
Brass wire hook. 4ft. monofilament
line with barb.
Packed: 25
7024
2-1/2" Long
Nylon Line with Barbs
Natural monofilament with metal
barbs. Available in other lengths &
materials, up to 20ft. maximum.
Packed: Bundles of 150's only
7025
4" Long
7026
5-1/2" Long
7027
7" Long
84
85
Hanging Accessories
7067
T-Bar Ceiling Anchor
Metal wire. Twists onto T-bar.
Packed: 100
7068
T-Bar Pinch Clip
Metal wire. Squeezes onto T-bar.
Packed: 100
7070
1" I.D.
Metal 'S' Hook
Galvanized wire.
Packed: 250
7080
1-5/8" I.D.
Metal 'S' Hook
Galvanized wire.
Packed: 100
7069
1-1/2" in diameter
C-Link
Galvanized wire.
Packed: 100
HP-C
Hang Pin – Coroplast
White plastic. This hang pin pierces
through coroplast providing an
eyelet to hang signage or displays.
Packed: 100
HP-F
Hang Pin – Foamcore
White plastic. This hang pin pierces
through foamcore providing and
eyelet to hang signage or displays.
Packed: 100
PO-1
Installation Pole – Cardboard
Comes in 3 sections. 8ft. long
when assembled.
Packed: 1
PO-2
Installation Pole – Aluminum
Telescopic. 9-1/2ft. long when
extended.
Packed: 1
7090
Twist-On Mobile
560B – Black
560W – White
560N – Natural
Hanger Clip for InstaGrip Banner Hanger
/ Atlas Heavy Duty Banner Hanger /
InstaGrip Orion Banner Hanger / InstaGrip
Heavy Duty Hinged Banner Tube
Hanging Accessories
White polypropylene. 48" string
with barb. Twists onto T-bar.
Packed: 100
Black, white or natural
polypropylene. With 5/16" dia.
hole for hanging.
Packed: 250
7065-6
6" Long
Hang Wires
3/32" metal wire. Available
in other lengths.
Packed: Bulk
7065-12
12" Long
Hang Wires
in other lengths.
Packed: Bulk
7065-18
18" Long
Hang Wires
in other lengths.
Packed: Bulk
7065-24
24" Long
Hang Wires
in other lengths.
Packed: Bulk
7065-36
36" Long
Hang Wires
in other lengths.
Packed: Bulk
7065-48
48" Long
Hang Wires
in other lengths.
Packed: Bulk
86
Banner Hangers
3045-22C
22" Long – Clear
3045-22B
22" Long – Black
3045-22W
22" Long – White
3045-96C
96" Long – Clear
Clear, black or white PVC.
Accepts wide range of lightweight
materials.
Packed: Bulk
3045-96B
96" Long – Black
3045-96W
96" Long – White
Omni Banner Hanger
3045-22CL
22" Long – Clear
3045-22BL
22" Long – Black
3045-22WL
22" Long – White
Clear, black or white PVC. With
integral hang loops for Omni
Banner Hanger. Accepts wide
range of lightweight materials.
Can be incorporated in any
position. Call for a quote.
Packed: Bulk
Omni Banner Hanger with Loop
3035-22C
22" Long – Clear
3035-22W
22" Long – White
3035-96C
96" Long – Clear
Clear or white PVC. 1/8" spine, for
lightweight banners and posters.
Packed: Bulk
3035-96W
96" Long – White
Poster Edging
2256-12
12" Long
2256-96
96" Long
White PVC. Accepts material
up to .020" thick.
Packed: Bulk
Plastic Split Tube
2259-12
12" Long
2259-96
96" Long
InstaGrip Split Tube
87
Co-extruded white PVC. This
display tube incorporates our
InstaGrip design for easy insertion
of sign and maximum grip.
Packed: Bulk
3055-22
22" Long
3055-96
96" Long
InstaGrip Grip Plus
Banner Stabilizer
3056-22
22" Long
3056-96
96" Long
InstaGrip Grip Plus
Banner Hanger
3033-22
22" Long
3033-96
96" Long
Lightweight Banner Hanger
Banner Hangers
Co-extruded clear PVC. Accepts
material from .010" - .050" thick.
3055-22 comes with pre-punched
holes for hanging. 3055-96 does
not come with pre-punched holes
but can be added at extra cost.
Packed: Bulk
material from .010" - .050" thick.
Use at the bottom of poster
with part #3055.
Packed: Bulk
Clear PVC. With 3/16" holes for
hanging. 1/8" spine. 3033-22
comes with pre-punched holes
for hanging. 3033-96 does not
come with pre-punched holes but
can be added at extra cost.
Packed: Bulk
309-22C
22" Long – Clear
309-22B
22" Long – Black
309-36C
36" Long – Clear
309-36B
36" Long – Black
309-96C
96" Long – Clear
Co-extruded clear or black
PVC. Snaps shut to hold banners
securely. Accepts material up to
.040" thick. Use with #560B,
560N, 560W Hanger Clip.
Packed: Bulk
309-96B
96" Long – Black
InstaGrip Hinged
Banner Hanger
309-96AC
96" Long – Clear
309-96AB
96" Long – Black
InstaGrip Hinged
Banner Hanger with Adhesive
Co-extruded clear or black
PVC. Snaps shut to hold banners
securely. Accepts material up to
.040" thick. Use with #560B,
Packed: Bulk
88
Banner Hangers
559-22B
22" Long – Black
559-22W
22" Long – White
559-36B
36" Long – Black
559-36W
36" Long – White
559-96B
96" Long – Black
Black or white PVC. Accepts
material from .010" - .125"
thick. Use with #560B, 560N,
560W Hanger Clip.
Packed: Bulk
559-96W
96" Long – White
Atlas H.D. Banner Hanger
596-22B
22" Long – Black
596-22W
22" Long – White
596-36B
36" Long – Black
596-36W
36" Long – White
596-96B
96" Long – Black
Co-extruded black or white
PVC. Accepts material from
.010" - .125" thick. Use with
#560B, 560N, 560W Hanger Clip.
Packed: Bulk
596-96W
96" Long – White
InstaGrip Orion H.D.
Banner Hanger
SCB-2B
22" Long – Black
SCB-2W
22" Long – White
SCB-4B
48" Long – Black
SCB-4W
48" Long – White
SCB-96B
96" Long – Black
Co-extruded black or white
PVC. Hinged action, snaps shut
and grips most banner materials
up to 1/8" thick. Use with #560B,
Packed: Bulk
SCB-96W
96" Long – White
Hinged Banner Tube
89
Banner Hangers
560B – Black
560W – White
560N – Nautral
Hanger Clip for InstaGrip
Banner Hanger / Atlas
Heavy Duty Banner Hanger
/ InstaGrip Orion Banner
Hanger / InstaGrip Heavy
Duty Hinged Banner Tube
SCB-J
Heavy Duty Hinged Joiner
SCB-6B
Black
SCB-6W
White
Black, white or natural
polypropylene. With 5/16" dia.
hole for hanging.
Packed: Bulk
Clear PVC. Connect two or more
banner tubes for wider banners.
Easy, slide-in assembly.
Packed: 250
Black or white polypropylene.
Snap-in cap for finished
appearance.
Packed: 500
Heavy Duty Hinged End Cap
3054
3/4" Long
Budget Valance Clip
Clear plastic. For use with
#3035 poster edging.
Packed: 250
90
DISPLAY CONSTRUCTION |
91
Suction Cups
7029
3/4" diameter
Suction Cup
Clear vinyl. With plain
mushroom head.
Packed: 500
7032
1" diameter
Suction Cup
mushroom head.
Packed: 500
7030-A
1-3/4" diameter
Suction Cup
mushroom head.
Packed: 100
7030-H
1-3/4" diameter
Suction Cup
Clear vinyl. With metal hook.
Packed: 100
7030-T
1-3/4" diameter
Suction Cup
Clear vinyl. With plasic thumbtack.
Packed: 100
7031
1-5/8" diameter
Suction Cup
Clear vinyl. With 1/2" long
integrated screw.
Packed: 100
118-SC
InstaGrip Suction Cup
Sign Holder
With 1" suction cup. Co-extruded
clear PVC. Holds sign at 90° to
surface. Accepts material up
to .065" thick.
Packed: 250
121-SC
Sign Holder
With 1" suction cup. Co-extruded
clear PVC. Holds sign flush with
surface. Accepts material up
to .065" thick.
Packed: 250
122-SC
Sign Holder
With 1-3/4" suction cup.
Co-extruded clear PVC. Holds
sign at 90° to surface. Accepts
Packed: 100
WSH-1
1-3/4" diameter
Heavy Duty Suction Cup
with Hook
The mechanical rotating suction of
this multi-purpose hook can attach
large banners on any window or
glossy surface without leaving a
hole or stain after removal.
Packed: Bulk
WSH-2
2-3/8" diameter
with Hook
The mechanical rotating suction of
this multi-purpose hook can attach
large banners on any window or
glossy surface without leaving a
hole or stain after removal.
Packed: Bulk
WSH-3
Mounting Plate
Heavy duty mounting plate is a
double suction cup that allows you
to attach it to existing lightweight
displays and mount to any window
or glossy surface.
Packed: Bulk
WS-10
9-1/2" W
Window Pocket
Brochure Holder
Holds literature up to 9-1/2" wide.
Can be easily used on any glossy
surface such as glass or tile.
Packed: Bulk
WS-12
4-1/2" W
Window Pocket
Brochure Holder
Can be easily used on any glossy
surface such as glass or tile.
Packed: Bulk
WSF-20
20" W
Window Flag Station – Silver
Silver, polycarbonate metal. This
window flag station holds banners
up to 20" wide.
Packed: 25
WSF-27
27-1/2" W
Window Flag Station – White
White plastic. This window
flag station holds banners up
to 27-1/2" wide.
Packed: 10
WYSH15
6-1/2" Long
Sign Holder
Clear plastic. Attaches to glass
surfaces. Clip holds material up to
3/8" thick. 1-1/2" O.D. suction cup.
Packed: 25
WYSH21
Flag Sign Holder
White plastic. .43” diameter
support tube that stays rigid by
a spring effect at the base of the
flag. Holds banners up to 8.27”W.
Suction cup 2.17” diameter.
Packed: Bulk
Suction Cups
92
Foam Adhesive Tape & Non-Slip Pads
Permanent Foam Adhesive Tape
Two-sided permanent adhesive.
Foam Adhesive Tape 1/32" Thickness x 216 ft. Roll
Order No.
Width
Case Qty.
Thickness
Feet / Roll
32P-2-025
32P-2-050
32P-2-075
32P-2-100
1/4"
1/2"
3/4"
1"
48
24
16
12
1/32"
1/32"
1/32"
1/32"
216 ft. Roll
216 ft. Roll
216 ft. Roll
216 ft. Roll
Order No.
Width
Case Qty.
Thickness
Feet / Roll
16P-2-050
16P-2-075
16P-2-100
1/2"
3/4"
1"
24
16
12
1/16"
1/16"
1/16"
216 ft. Roll
216 ft. Roll
216 ft. Roll
Order No.
Width
Case Qty.
Thickness
Feet / Roll
18P-1-050
18P-1-075
18P-1-100
1/2"
3/4"
1"
24
16
12
1/8"
1/8"
1/8"
108 ft. Roll
108 ft. Roll
108 ft. Roll
Removable Foam Adhesive Tape
Removable adhesive on one side, permanent adhesive on the other.
Order No.
Width
Case Qty.
Thickness
Feet / Roll
32R-2-025
32R-2-050
32R-2-075
32R-2-100
1/4"
1/2"
3/4"
1"
48
24
16
12
1/32"
1/32"
1/32"
1/32"
216 ft. Roll
216 ft. Roll
216 ft. Roll
216 ft. Roll
Order No.
Width
Case Qty.
Thickness
Feet / Roll
16R-2-050
16R-2-075
16R-2-100
1/2"
3/4"
1"
24
16
12
1/16"
1/16"
1/16"
216 ft. Roll
216 ft. Roll
216 ft. Roll
93
Order No.
Width
Case Qty.
Thickness
Feet / Roll
18R-1-050
18R-1-075
18R-1-100
1/2"
3/4"
1"
24
16
12
1/8"
1/8"
1/8"
108 ft. Roll
108 ft. Roll
108 ft. Roll
NSP-2
1/2" Diameter
Non-Slip Buttons
Black polyolefin. 1/16" thick.
Perforated in sets of 4.
Packed: Bulk
NSP-4
1" x 3"
Non-Slip Pads
Black polyolefin. 1/16" thick.
Packed: Bulk
Foam Adhesive Tapes & Pads
2312
1" x 1/2"
Foam Adhesive Pads
18 pads per sheet. 1/32" thickness.
Packed: 10 sheets / 180 pads
2312-A
1" x 1"
Foam Adhesive Pads
2312-AR
1" x 1"
Removable Foam Adhesive Pads
One side removable adhesive and
one side permanent adhesive. 24
pads per sheet. 1/32" thickness.
2315-A
1" x 1"
Foam Adhesive Pads
2316-A
1" x 1"
Foam Adhesive Pads
36 pads per sheet. 1" thickness.
2314
Foam Adhesive Pads
5,000 pads per roll.
1/32" thickness.
2313
5/8" diameter
Foam Adhesive Discs
12 discs per sheet. 1/32" thickness.
2318B – Black
2318W – White
Compact Disc Buttons
One-sided permanent adhesive.
2,500 buttons per roll. 1/8"
thickness. Use to attach CD's
or DVD's to brochures and
show cards.
94
Adhesive Remover / Magnetic Tape / Plastic Easels
67800
Tape Away Adhesive Remover
Designed to remove tape and
tape residue from store shelving,
fixtures and other surfaces.
4 oz. bottle.
Packed: 12
Flexible Magnetic Tape
Magnetized multipole with indoor self-adhesive backing 0.65 MGOe –
Maxium Energy Product (x10° Gauss Oersted). 0.060" thickness x 100 ft. roll.
0.060" Thickness x 100 ft. Roll
95
Part No.
Width
Length
Thickness
Packed
60-050
60-075
60-100
1/2"
3/4"
1"
100 ft. Roll
100 ft. Roll
100 ft. Roll
0.060"
0.060"
0.060"
108 ft. Roll
108 ft. Roll
108 ft. Roll
1406
6" High
Packed: Bulk
1408
8" High
Packed: Bulk
1410
10" High
Packed: Bulk
1414
14" High
Packed: Bulk
8350
5" Long
Secur-A-Tie
Permanent Locking Strap
Natural nylon
Packed: 1,000
8320
8" Long
Secur-A-Tie
Permanent Locking Strap
Natural nylon
Packed: 1,000
8432
4" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
8376
5-1/2" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
8470
7" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
8377
8" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
8471
11" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
8472
15" Long
Lock Strap
Permanent Locking
Natural nylon
Packed: 1,000
1361
7-1/2" Long
Lock Strap – Releasable
Natural nylon. Release and re-use.
Packed: 1,000
1367
11" Long
Lock Strap – Releasable
Natural nylon. Release and re-use.
Packed: 1,000
Plastic Lock Straps
96
Velcro® Fasteners
Hooks
Loops
Velcro® Brand Adhesive Tape
Jumbo roll. 2 strips across. Hooks or loops. Available in white or black.
Part No.
6500-HW
6500-LW
6500-HB
6500-LB
Width (mm = approx.")
12.5mm
1/2"
12.5mm
1/2"
12.5mm
1/2"
12.5mm
1/2"
Color
Type
Yards (per Roll)
Packed
White
White
Black
Black
Hook
Loop
Hook
Loop
50 (2 x 25)
50 (2 x 25)
50 (2 x 25)
50 (2 x 25)
Bulk
Bulk
Bulk
Bulk
Velcro® Brand Adhesive Tape
Jumbo roll. Single strip. Hooks or loops. Available in white or black.
Part No.
6600-HW
6600-LW
6600-HB
6600-LB
6601-HW
6601-LW
6601-HB
6601-LB
19mm
3/4"
19mm
3/4"
19mm
3/4"
19mm
3/4"
25mm
1"
25mm
1"
25mm
1"
25mm
1"
Color
Type
Yards (per Roll)
Packed
White
White
Black
Black
White
White
Black
Black
Hook
Loop
Hook
Loop
Hook
Loop
Hook
Loop
25
25
25
25
25
25
25
25
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Velcro® Brand Fasteners (Buttons)
Jumbo roll. Hooks or loops. Available in white or black. With permanent adhesive.
Part No.
6501-HW
6501-LW
6501-HB
6501-LB
6602-HW
6602-LW
6602-HB
6602-LB
6603-HW
6603-LW
6603-HB
6603-LB
97
15mm
9/16"
15mm
9/16"
15mm
9/16"
15mm
9/16"
19mm
3/4"
19mm
3/4"
19mm
3/4"
19mm
3/4"
22mm
7/8"
22mm
7/8"
22mm
7/8"
22mm
7/8"
Color
Type
Buttons/Roll
Packed
White
White
Black
Black
White
White
Black
Black
White
White
Black
Black
Hook
Loop
Hook
Loop
Hook
Loop
Hook
Loop
Hook
Loop
Hook
Loop
1,257
1,257
1,257
1,257
1,028
1,028
1,028
1,028
900
900
900
900
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Velcro® Fasteners
Velcro® Brand Adhesive Tape Twin Pack
Two 98" rolls per pack – one roll of hooks and one roll of loops. Available in
white or black. With permanent adhesive.
Part No.
6650-HLW
6650-HLB
6610-HLW
6610-HLB
19mm
3/4"
19mm
3/4"
25mm
1"
25mm
1"
Color
Length (metres= inches)
White
Black
White
Black
Packed
2 x 2.5 metres
98"
2 Roll Twin Pack
2 x 2.5 metres
98"
2 Roll Twin Pack
2 x 2.5 metres
98"
2 Roll Twin Pack
2 x 2.5 metres
98"
2 Roll Twin Pack
Velcoin® Brand Fasteners (Buttons)
Two rolls per pack – 100 hooks and 100 loops. Available in
white or black. With permanent adhesive.
Part No.
6604W
6604B
6605W
6605B
6606W
6606B
Dia. (mm = approx.")
15mm
9/16"
15mm
9/16"
19mm
3/4"
19mm
3/4"
22mm
7/8"
22mm
7/8"
Color
White
Black
White
Black
White
Black
Pack Consists Of
Packed
100 Hooks
100 Loops
2 Roll Twin Pack
100 Hooks
100 Loops
2 Roll Twin Pack
100 Hooks
100 Loops
2 Roll Twin Pack
100 Hooks
100 Loops
2 Roll Twin Pack
100 Hooks
100 Loops
2 Roll Twin Pack
100 Hooks
100 Loops
2 Roll Twin Pack
Velcro® Brand Adhesive Handi-Strips
With permanent adhesive. Available in 3" and 6" lengths. Convenient pre-cut and
mated, strips of hooks and loops for many display applications. Stocked in white
only – black to special order.
Part No.
6643
6646
Length
Color
Packed
White
White
Bulk
25mm
1"
3" Long
25mm
1"
6" Long
Bulk
98
Corrugated Shelf Supports
There has never been as easier, quicker, more secure way to build shelves for corrugated
displays. No nuts and bolts. No glue. No mess. With Corr-A-Clip, you simply insert the clip into
the corrugated cutout, slide into place, and slip the edge of the shelf over Corr-A-Clip's capture
leg. Corr-A-Clip is available in multiple styles for standard and heavy-duty applications.
99
CS-89
1-1/2" Long
Corr-A-Clip
Standard Single Capacity
Clear PVC. Holds a single
thickness of 1/8" B-flute
corrugated shelf construction
and 1/8" display wall, for a total
1/4" capacity. Available with
adhesive to permanently
secure shelf to clip – at
additional cost.
Packed: Bulk
CS-90
1-1/2" Long
Corr-A-Clip
Heavy Duty Double Capacity
Clear PVC. Holds a double
corrugated shelf constructio
and 1/8" display wall, for a
total 3/8" capacity. Available
with adhesive to permanently
additional cost.
Packed: Bulk
CS-91
1-1/2" Long
Corr-A-Clip
Standard Single Capacity
Clear PVC. Holds a single
corrugated shelf construction
and 1/8" display wall, for a total
1/4" capacity. Available with
adhesive to permanently
additional cost.
Packed: Bulk
CS-92
1-1/2" Long
Corr-A-Clip
Heavy Duty Double Capacity
Clear PVC. Holds a double
corrugated shelf constructio
and 1/8" display wall, for a
total 3/8" capacity. Available
with adhesive to permanently
additional cost.
Packed: Bulk
Corrugated Shelf Supports
CS-93
2" Long
Shelf Support System
(Vertical)
Natural polypropylene. 2" long
shelf support for corrugated
display construction. Two holes
allow glue to seep through
to provide a secure hold.
Packed: 100
CS-94
2" Long
Corr-A-Clip Heavy-Duty
(Horizontal)
Natural polypropylene. 2" long
shelf support for corrugated
display construction. Has teeth
along the sides and top which
bite into corrugated panels
for maximum grip.
Packed: 100
CS-95
2-1/4"L x 1-7/8"H
Two-piece shelf support allows
for pre-attachment to corrugated
displays prior to shipping. Holes
allow glue to seep through for
stronger hold. Fits up to 3/16"
C-flute corrugated.
Packed: 100
CS-96
2-1/4"L x 2-3/8"H
Two-piece shelf support allows
for pre-attachment to corrugated
displays prior to shipping. Holes
allow glue to seep through for
stronger hold. Fits up to 3/16"
C-flute corrugated.
Packed: 100
100
101
Pole Display Accessories
2221
Pole / Bottle Sign Holder
With permanent adhesive. White
PVC. For 1" O.D. poles. Can
be used with WCP-1.
Packed: 250
2221-A
With permanent adhesive. White
PVC. For 1-1/2" O.D. poles.
Packed: 50
2221-B
With permanent adhesive. Clear
styrene. For 2" O.D. poles.
Packed: 50
2238
3" Long
InstaGrip Pole Gripper
with Sign Holder
Co-extruded clear PVC. For 1"
O.D. poles. Holds material
up to 3/16" thick.
Packed: 100
2240
96" Long
Plastic Pole
White PVC. 13/16" I.D. / 15/16 O.D.
Packed: Bulk
2241
Pole Foot, Small
2" x 3-1/8" Base. With
permanent adhesive. White
styrene. For 13/16" I.D. poles.
Can be used with WCP-1.
Packed: 50
2241-A
Pole Foot, Large
2-1/2" x 3-1/2" Base. With
permanent adhesive. White
styrene. For 1-1/4" O.D. or
1-15/32" I.D. poles. Can be
used with WCP-2.
Packed: 50
WCP-1
6' Long
2-Piece Cardboard Pole
White litho paper. 13/16" I.D. /
1" O.D. Use with MFT-1 Small
Wire Foot. Shipping length is 39".
Packed: Bulk
WCP-2
6' Long
2-Piece Cardboard Pole
White litho paper. 1-5/32" I.D. /
1-3/4" O.D. Use with MFT-2 Large
Wire Foot. Shipping length is 39".
Packed: Bulk
Pole Display Accessories
MFT-1
24" Span
Small Wire Foot
Use with WCP-1 Cardboard
Poles. 2-part set with 24"
span. Uncoated wire.
Packed: Bulk
MFT-2
24" Span
Large Wire Foot
Use with WCP-2 Cardboard
Poles. 2-part set with 24"
span. Uncoated wire.
Packed: Bulk
2246
Pole Top Sign Holder, Small
Clear styrene. For 13/16" I.D. poles.
Packed: 50
2247-A
Pole Top Sign Holder, Large
Clear styrene. For 1" I.D. poles.
Packed: 50
RPG-1G
Grey – 12-1/4" Dia.
RPG-1B
Black – 12-1/4" Dia.
Grey or black styrene. 12-1/4"
overall diameter. Accepts 1"
O.D. aluminum poles.
Packed: Carton
Plastic Pole Base
RPG-2G
Grey – 17-1/4" Dia.
RPG-2B
Black – 17-1/4" Dia.
Grey or black styrene. 17-1/4"
overall diameter. Accepts 1"
O.D. aluminum poles.
Packed: Carton
Plastic Pole Base
TB-1
53-3/4" Long
2-Part Metal Pole Set
Bright aluminum finish. To
fit #RPB-1 and #RPB-2 Bases.
1" O.D. x 53-3/4" total length.
Packed: 54
TB-2
58" Long
2-Part Metal Pole Set
Bright aluminum finish. To
fit #RPB-1 and #RPB-2 Bases.
1" O.D. x 58" total length.
Packed: 54
102
103
Acrylic Fabrication Accessories
PB-1
Pegboard Bracket
White styrene. Fits standard 1/4"
for larger units.
PBA-94
2-3/8" Long
Pegboard Bracket
Clear acrylic. Easily cemented to
acrylic fixtures and displays.
Packed: 250
Z CHANNEL
White styrene. Fits most
standard slatwall. Two might be
required for larger units.
SB-1
Slatwall Bracket
White styrene. Fits most
standard slatwall. Two might be
required for larger units.
SBA-93
2-3/8" Long
Slatwall Bracket
Packed: 250
1150-A
Keyhole Mounting Plate
Packed: 250
1160
Glass / Wire Bracket
Plated spring steel. Clips onto
wire, glass, etc. Rivet to a wide
variety of display products.
Packed: 1000
GW-1
Glass / Wire Bracket
Plated spring steel. Attaches
units to glass and wire risers and
fences etc. (Applied in pairs to all
units). Price includes installation
– this item sold attached to any
print or brochure holders.
Packed: Installation Included
1170
Price Channel Clip – Metal
Plated spring steel. Clips onto
1-1/4" price channel. Rivet to a
wide variety of display products.
Packed: 1000
FM-1A
8-1/2" Wide
Brochure Pocket
Clear acrylic. Accepts
literature up to 8-1/2" wide.
Overall outside dimensions:
8-7/8"W x 7-5/8"H x 1-3/8"D
FM-3A
4" Wide
Brochure Pocket
literature up to 4" wide.
4-3/8"W x 4-1/16"H x 1-1/8"D
FM-4A
3-1/2" Wide
Business Card Pocket
Clear acrylic. Accepts cards
up to 3-1/2" wide.
3-7/8"W x 1-3/8"H x 1-1/8"D
FM-5A
5-1/2" Wide
Brochure Pocket
5-5/16"W x 4-5/8"H x 2"D
FML-5A
5-1/2" Wide
Brochure Pocket
5-5/16"W x 4-5/8"H x 2"D
FM-6A
4" Wide
Brochure Pocket
4-7/16"W x 4-7/16"H x 2"D
FML-6A
4" Wide
Brochure Pocket
4-7/16"W x 4-7/16"H x 2"D
104
105
FM-7A
2" Wide
Business Card Pocket
Accepts cards up to 2" wide.
2-3/8"W x 2-1/8"H x 1-1/8"D
FM-8A
8-1/2" Wide
Brochure Pocket
Accepts literature up to 8-1/2"
wide. Overall outside dimensions:
8-13/16"W x 4-1/2"H x 1-3/8"D
ACH-2
Acryl-Hinge
Solvent cementable. Clear acrylic.
1-1/2" x 1-3/4"
Packed: Pairs (100 Box)
L-05
4" Rotating on 5" Base
Plastic Turntables
(Lazy Susans)
White, injection molded plastic.
Smooth, steel ball bearings. Easily
cemented to plastic and wood.
Packed: 64
L-66
Plastic Turntables
(Lazy Susans)
Packed: 112
L-07
Plastic Turntables
(Lazy Susans)
Packed: 88
L-09
Plastic Turntables
(Lazy Susans)
Packed: 68
Hinged
Display Construction Components
112-200
2" Long
InstaGrip Double-Grip Hinge
Packed: 100
112-96
96" Long
InstaGrip Double-Grip Hinge
Packed: Bulk
160-100
1" Long
Right-Angle Connector
Packed: 100
160-300
3" Long
Packed: 50
160-48
48" Long
Packed: Bulk
90D-100
1" Long
InstaGrip Right-Angle Connector
Packed: 100
60D-100
1" Long
InstaGrip 60° Angle Connector
Packed: 100
Hinged
106
107
3P-100
1" Long
InstaGrip 3-Way Connector
Packed: 100
4P-100
1" Long
InstaGrip 4-Way Connector
Packed: 100
114-100
1" Long
InstaGrip Two-Way
Sign Gripper
Co-extruded clear PVC. Holds
materials at 90° to attaching
surface. Will also attach to some
wire. Accepts material up to
.065" thick.
Packed: 250
119-100
1" Long
InstaGrip Duo-Grip
Sign Gripper
Co-extruded clear PVC. With
two-way gripping capability.
Packed: 250
119-300
3" Long
InstaGrip Duo-Grip
Sign Gripper
Packed: 100
119-96
96" Long
InstaGrip Duo-Grip
Sign Gripper
Packed: Bulk
604-075
3/4" Wide
InstaGrip 90° Highlighter
Clip
Co-extruded clear PVC. Attaches to
flat surfaces – holds your display
material at right angle. Accepts
Packed: 250
811-150
1-1/2" Long
InstaGrip Panel Holder
Co-extruded clear PVC. Dual
capacity. One side holds material
up to .065" thick, other side holds
Packed: 250
814-100
1" Long
Panel Holder
Co-extruded clear PVC. Dual
capacity. Both sides hold material
up to .250" thick.
Packed: 250
162-100
1" Long
Double-Grip Clip
Packed: 100
162-300
3" Long
Double-Grip Clip
Packed: 50
162-48
48" Long
Double-Grip Clip
Packed: Bulk
164-48A
48" Long
With adhesive. Co-extruded
clear PVC. Accepts material
up to .125" thick.
Packed: Bulk
111-100
1" Long
Packed: 100
111-300
3" Long
Packed: 100
111-48
48" Long
Packed: Bulk
166-100
1" Long
InstaGrip H-Clip
material up to .080" thick on one
side, and .125" to .375" thick
on the other side
Packed: 250
166-150
1-1/2" Long
InstaGrip H-Clip
material up to .080" thick on one
side, and .125" to .375" thick
on the other side
Packed: 100
108
109
210-100
1" Long
InstaGrip Double-Thick
Display Holder
3/4" wide base. With permanent
adhesive. Co-extruded clear
PVC. Accepts material .120"
to .175" thick.
Packed: 100
210-300
3" Long
Display Holder
to .175" thick.
Packed: 100
210-96A
96" Long
Display Holder
to .175" thick.
Packed: 100
806-300
3" Long
Co-extruded clear PVC. Attaches
to mounting surface 1/4" thick.
Hinges upwards.
Packed: 50
2100
1" x 1"
Rite Angle
Adhesive Inside
Clear PVC.
Packed: 250
2100-A
1" x 1"
Rite Angle
Adhesive Outside
Clear PVC.
Packed: 250
2279-LS
4" Lock Strap
Display Loop
With permanent adhesive and
4" locking strap. Set includes:
#2279 (Mobile button) and
#8432 (4" Lock strap).
Packed: 100
DC-1
2" x 2"
Plastic Display Caster
Molded polypropylene. Onepiece, reinforced design raises
heavyweight displays 3/4" from
floor. Round design allows
displays to be moved easily.
Packed: Bulk
24-125N
Natural – 1/8" capacity
24-125B
Black – 1/8" capacity
Connectors & Fasteners
Natural or black polypropylene.
Flush fitting. Drill 5/16" hole.
Packed: 1,000
Eze-Snap
24-250N
24-250B
Packed: 1,000
Eze-Snap
24-375N
24-375B
Packed: 1,000
Eze-Snap
24-500N
24-500B
Packed: 1,000
Eze-Snap
AT-1
Expand-A-Lok
2305-A
2305-B
White nylon. Push fit fastener,
holds two panels together. Fits
.125" dia. holes. Accepts up to
.250" thickness.
Packed: Bulk
Drill 1/4" hole.
Packed: 1,000
Thumbsnaps
2305-B
2305-AB
Drill 1/4" hole.
Packed: 1,000
Thumbsnaps
2305-C
2305-CB
Drill 1/4" hole.
Packed: 1,000
Thumbsnaps
2305-D
2305-DB
Drill 1/4" hole.
Packed: 1,000
Thumbsnaps
110
111
2385
1/8" Capacity
Dart Clip
White acetal. Drill 3/16" hole.
Packed: 1,000
2385-L
1/4" Capacity
Dart Clip
Natural nylon. Drill 1/4" hole.
Packed: 1,000
2510
1/2" Capacity
Christmas Tree Clip
Natural nylon. Easily inserted into
1/4" round or diamond shaped
holes. Secure hold. Also available
in clear or black – minimum
quantity of 5,000 pieces.
Packed: 1,000
DAF-1
1/8" Capacity
Double-Headed Arrowhead
Natural polypropylene. Clips
into material up to .100" thick.
Drill 17/64" hole.
Packed: 500
DAF-2
3/8" Capacity
Double-Headed Arrowhead
Natural polypropylene. Clips
into material up to .100" thick.
Drill 17/64" hole.
Packed: 500
2395
Shelf Dart Clips
White H.I.P.S. With 3/8" head.
Use with Pak-Strips – fits most
standard 1/4" shelf perforations.
Packed: 1000
2301-A
1" Long
Viking Screws
Clear plastic. Drill 3/16" hole.
Packed: 1,000
2301
3/4" Long
Viking Screws
Packed: 1,000
2301-B
1/2" Long
Viking Screws
Packed: 1,000
2406-A
1/4" Capacity
Adjust-A-Loks
White polyethylene / nylon.
Packed: 1,000
2406-B
1/2" Capacity
Adjust-A-Loks
White polyethylene / nylon.
Packed: 1,000
3701
1/4" Capacity
Aluminum Screw Posts
Flush fitting. 3/16" diameter.
Packed: 500
3703
1/2" Capacity
Packed: 500
3705
3/4" Capacity
Packed: 100
3706
1" Capacity
Packed: 100
2219
1-3/4" x 3/4"
Flexible Hinge
With adhesive pads. Natural
polypropylene.
Packed: 250
2308
3/8" x 7/8" I.D.
Oval Split Ring
White polyethylene.
Packed: 1,000
2308-A
2" x 15/16" I.D.
Large Oval Split Ring
White polyethylene.
Packed: 1,000
112
113
2309
9/16" I.D.
Round Split Ring
White polyethylene.
Packed: 1,000
2309-A
3/4" I.D.
Round Split Ring
White polyethylene.
Packed: 1,000
1905
1/2" I.D.
Metal Locking Ring
Plated metal. Hinged, snaps
closed for secure hold.
Packed: 100
1975
3/4" I.D.
Metal Locking Ring
Packed: 100
1910
1" I.D.
Metal Locking Ring
Packed: 100
K-11
11/16" I.D.
Spiral Ring
White polyethylene.
Packed: 1,000
7062
Packed: 100
7069
1-1/2" O.D.
C-Link
Galvanized wire.
Packed: 100
7070
1" I.D.
Metal ‘S’ Hook
Galvanized wire.
Packed: 250
7080
1-5/8" I.D.
Metal ‘S’ Hook
Galvanized wire.
Packed: 100
7084
4-1/2" Long
Coiled Tether – Two Split Rings
Tether: Black polyurethane. 1/2" I.D.
metal split rings. 4-1/2"L tether
stretches to 36"L.
Packed: 50
7086
4-1/2" Long
Coiled Tether – Split Ring
& Adhesive Pad
Tether: Black polyurethane. 1/2" I.D.
metal split rings and 3/4" adhesive
pad. 4-1/2"L tether stretches
to 36"L.
Packed: 50
114
BROCHURE HOLDERS |
115
Countertop
SO-1
SOLO Economy Free-Standing
Brochure Holder
Clear styrene. Holds
literature up to 4" wide. Links
side by side. Overall size:
4-5/16"W x 6-1/2"H x 2-3/4"D
Packed: 112
3S-4F
3-Sided Countertop Revolver
White plastic body, clear pockets.
Holds literature up to 4"W. Overall
size: 6-1/2"W x 10"H x 6-1/2"D
Packed: 6
3S-8F
3-Sided Countertop Revolver
White plastic body, clear
pockets. Holds literature up
to 8-1/2"W. Overall size:
12"W x 13"H x 12"D
Packed: 2
592701CI
Countertop Rotator
Leaflet Size – White
3 clear compartments. Rotating
base. Extra deep pockets for
maximum literature capacity.
Packed: 6
592704CI
Countertop Rotator
Leaflet Size – Black
3 clear compartments. Rotating
base. Extra deep pockets for
maximum literature capacity.
Packed: 6
592801CI
Countertop Rotator
Magazine Size – White
3 clear compartments.
Rotating base.
Packed: 2
592804CI
Countertop Rotator
Magazine Size – Black
3 clear compartments.
Rotating base.
Packed: 2
CAR-6
Countertop Rotating
Brochure Holder
For material up to 4" wide.
6 compartments.
Packed: 1
BROCHURE HOLDERS |
CRS-600C
Countertop Rotating
Brochure Holder
For material up to 8-1/2" wide.
3 compartments. Available with
clear pockets, white base and cap.
Packed: 2
CRS-660
Countertop Rotating
Brochure Holder
clear or white pockets, white
base and cap.
Packed: 1
CRS-700
Countertop Rotating
Brochure Holder
clear or white pockets, white
base and cap.
Packed: 4
CRS-800
Countertop Rotating
Brochure Holder
For material up to 4" wide.
clear pockets, white base and cap.
Packed: 1
RBH-1
1" Capacity
Real Estate Brochure Holder
For material 8-1/2"W x 11"H.
Packed: 10
RBH-2
2" Capacity
Real Estate Brochure Holder
For material 8-1/2"W x 11"H.
Packed: 10
775383CI
Modern Countertop Brochure
Holder – Leaflet Size
Overall size:
4-5/16"W x 8"H x 3-3/4"D
Packed: 6
775390CI
Modern Countertop Brochure
Holder – Magazine Size
Overall size:
9-1/2"W x 12-1/2"H x 11"D
Packed: 6
Countertop
116
BROCHURE HOLDERS |
117
Countertop
BPS-601CI
Literature Holder
with Base
Clear. For material up to
8-1/2"W. 2" capacity. Features
holes for mounting.
Packed: 20
BPS-641CI
Literature Holder
with Base
8-1/2"W. 4" capacity. Features
holes for mounting.
Packed: 10
BPS-651CI
Literature Holder
with Base
6-5/8"W. Features holes
for mounting.
Packed: 40
BPS-661CI
Literature Holder
with Base
for mounting.
Packed: 60
BPS-671CI
Literature Holder
with Base
for mounting.
Packed: 48
BPS-681CI
Literature Holder
with Base
for mounting.
Packed: 36
BPS-681DCI
Literature Holder
with Divider and Base
for mounting and divider.
Packed: 36
BPS-701CI
Literature Holder
with Base
for mounting.
Packed: 72
BROCHURE HOLDERS |
BPS-751CI
Literature Holder
with Base
for mounting.
Packed: 108
BPS-801CI
Literature Holder
with Base
4"W. Features holes
for mounting.
Packed: 64
BPS-841CI
Literature Holder
with Base
for mounting.
Packed: 96
BPS-861CI
Literature Holder
with Base
for mounting.
Packed: 40
BPS-871CI
Literature Holder
with Base
for mounting.
Packed: 48
Countertop
Premium Series
Style J
Clear styrene. Protects your signs from stains, scratches and
tears. AHS-Jw/CS-55CGP has a business card holder attached.
Part No.
AHS-J-8.5x11
AHS-J2-8.5x11
AHS-Jw/CS-55CGP
81⁄2"
81⁄2"
81⁄2"
11"
11"
11"
Clear
Clear
Clear
Ctn. 12
Ctn. 24
Ctn. 12
118
BROCHURE HOLDERS |
119
Countertop
TK-4-C
Slant Back Literature Holder
Clear. For material up to 4"W.
Packed: 64
TK-4-CI
Features holes for mounting.
Packed: 48
TK-4-SB
Clear. Low back. For material
up to 4"W – diskette size.
Packed: 20
TK-5.5-C
Clear. For material up to 5-1/2"W.
Packed: 42
TK-6-C
Packed: 36
TK-6-CI
Packed: 48
TK-8.5-C
Packed: 12
TK-8.5-CI
Packed: 16
BROCHURE HOLDERS |
TK-8.5-DC
Clear. With divider. For material
up to 4" wide. 2 compartments.
Packed: 12
TK-8.5-DCI
Clear. With divider. For material
up to 4" W. Features holes
for mounting.
Packed: 20
TK-8.5-SB
8-1/2" W. Low back.
Packed: 8
TK-4-CI w/CS-55CI
Clear. For material up to 4" W.
4 compartments. Features holes
for mounting.
Packed: 48
TK-8.5-CI w/CS-55CI
Packed: 16
RTK4-2CI
2 compartments.
Packed: 20
RTK8.5-2CI
2 compartments.
Packed: 8
53501
Countertop Literature Display
Packed: 6
53601
Counter / Wall Literature
Display
2" capacity. Features holes
for mounting.
Packed: 20
Countertop
120
BROCHURE HOLDERS |
121
Ship Flat
FP-1
Free-Standing Literature Box
Clear .020" PVC. Holds literature
up to 4" wide. Overall size:
4"W x 7-1/2"H x 1-1/2"D. Also
available in white to special order.
Packed: Bulk
FP-2
6-1/8"W x 8-3/8"H x 2-3/4"D. Also
Packed: Bulk
FP-3
6-1/8"W x 3"H x 1-1/4"D. Also
Packed: Bulk
CF-4
Fold-Up Holder
Ships flat and easily folds into a literature holder. Holds material up
to 4-1/4" wide.
Packed: 100
BROCHURE HOLDERS |
50101
Magnetic Wall Pocket
Letter Size
Clear. Pockets attach to any metal
surface. Strong, non-slip magnets
inlcuded. 15"W x 7"H x 4"D.
Packed: 12
73101
Magnetic Wall Pocket
Letter Size
Clear. Pockets attach to any metal
surface. Strong, non-slip magnets
included. 13"W x 7"H x 4"D.
Packed: 4
694504
Confidential Wall Pocket
Black. Break resistant pocket.
Increased height keeps sensitive
documents private. Includes pocket,
frame and mounting hardware.
18"W x 11-1/4"H x 4-1/4"D.
Packed: 4
694604
Option Wall Pocket
Black. Break resistant pocket.
Includes pocket, frame and
mounting hardware.
18"W x 11-1/4"H x 4-1/8"D.
Packed: 4
63001
European Wall Pocket
Portrait
Clear. Linking mechanism enables
additional pockets to be added.
Mounting hardware included.
10-1/4"W x 10"H x 4"D
Packed: 6
63101
European Wall Pocket
Landscape
Clear. Linking mechanism enables
additional pockets to be added.
14-3/4"W x 7"H x 4"D
Packed: 6
62101
Unbreakable Wall Pocket
Invoice Size
Clear. 100% guaranteed not
to crack or break. Mounting
hardware included.
11-7/8"W x 6-1/2"H x 3"D
Packed: 12
63201
Letter Size
hardware included.
14-1/2"W x 6-1/2"H x 3"D
Packed: 12
64301
Legal Size
hardware included.
17-1/2"W x 6-1/2"H x 3"D
Packed: 12
Wall Mount
122
BROCHURE HOLDERS |
Wall Mount
65501
File and Chart Holder
Clear. Holds files, charts and more.
10"W x 10-1/2"H x 2"D
Packed: 12
55501
Wall Mount Upright
Literature Pockets
Magazine Size
Clear. Break-resistant pocket keeps
literature upright and prevents
slumping. Tongue and groove sides
let you connect units together.
9-1/8"W x 11-3/4"H x 2-3/4"D
Packed: 6
55601
Wall Mount Upright
Literature Pockets
Leaflet Size
Clear. Break-resistant pocket keeps
literature upright and prevents
slumping. Tongue and groove sides
let you connect units together.
4-9/16"W x 11-3/4"H x 2-3/4"D
Packed: 6
BPS-100CI – Plain
BPS-100TP – with Tape
BPS-100VC – with Velcro®
Packed: 100
Wall Mount Literature Holder
BPS-213CI – Plain
BPS-213VC – with Velcro
®
Packed: 100
BPS-300CI – Plain
Packed: 240
BPS-320CI – Plain
Packed: 120
BPS-370CI – Plain
Packed: 340
123
BROCHURE HOLDERS |
Wall Mount
BPS-600CI – Plain
for mounting.
Packed: 20
BPS-613CI
Literature Holder
Packed: 14
BPS-618CI
Literature Holder
Clear. With 3 adjustable dividers
to fit your ad material. Features
holes for mounting.
Packed: 18
BPS-640CI – Plain
4" Capacity. Features holes
for mounting.
Packed: 10
BPS-650CI – Plain
Packed: 48
BPS-660CI – Plain
Packed: 60
BPS-670CI – Plain
Packed: 48
BPS-680CI – Plain
Packed: 36
124
BROCHURE HOLDERS |
Wall Mount
BPS-680DCI – Plain
BPS-680DTP – with Tape
BPS-680DVC – with Velcro®
With divider. 2 compartments.
Packed: 36
BPS-690CI – Plain
With divider.
Packed: 36
BPS-700CI – Plain
Packed: 72
BPS-750CI – Plain
Packed: 108
BPS-754W
Literature Holder
for mounting.
Packed: 18
BPS-800CI – Plain
Packed: 64
BPS-820CI
Literature Holder
125
Packed: 100
BROCHURE HOLDERS |
BPS-830CI
Literature Holder
Wall Mount
Packed: 100
BPS-840CI – Plain
Packed: 96
BPS-850CI
Literature Holder
Packed: 30
BPS-860CI – Plain
Packed: 40
BPS-870CI – Plain
Packed: 54
BPS-880CI
Literature Holder
Packed: 200
BPS-900CI
Literature Holder
Packed: 100
126
BROCHURE HOLDERS |
Wall Mount Brochure Racks
56201
Pre-assembled Wall System
8 Leaflet Size Pockets
Wall systems are pre-attached
to a black back panel for easy
installation. 2-1/2" deep
literature capacity.
Packed: 1
56801
9 Magazine Size Pockets
Packed: 1
596001
3 Magazine / 6 Leaflet
Size Pockets
Packed: 1
Wall Savers
For material up to 8-1/2" wide x 11" high. Any row or column of 8-1/2" x 11"
pockets can be changed to double 4-1/4" x 9" pockets at no additional charge.
Unique "time card" style design allows for ample view of literature while using
minimum wall space. Clear.
Model
SC-2
SC-3
SC-4
DC-2
DC-3
DC-4
TC-2
TC-3
TC-4
Description
Packed
Single column x 2 pockets
Double column x 2 pockets
Triple column x 2 pockets
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Box Frames
Model 25 fits posters up to 18-1/2" wide by 25" high; Model 36 fits posters
up to 18-1/2" wide by 36" high. Clear acrylic covers slide over your poster. Wall
mount wood frame.
Model
25-A
25-B
25-C
25-D
25-E
36-A
36-B
36-C
36-D
36-E
127
Description
(2) 81⁄2" x 11"
(4) 4" x 9"
(2) 81⁄2" x 11", (4) 4" x 9"
(8) 4" x 9"
(4) 81⁄2" x 11"
(4) 81⁄2" x 11"
(4) 81⁄2" x 11", (4) 4" x 9"
(2) 81⁄2" x 11", (8) 4" x 9"
(2) 81⁄2" x 11", (4) 4" x 9"
(12) 4" x 9"
Packed
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn. 1
Ctn.1
BROCHURE HOLDERS |
BPS-600PG
Literature Holder
with Peghook
for mounting.
Packed: 20
BPS-640PG
Literature Holder
with Peghook
for mounting.
Packed: 10
BPS-650PG
Literature Holder
with Peghook
Packed: 48
BPS-660PG
Literature Holder
with Peghook
Packed: 60
BPS-670PG
Literature Holder
with Peghook
Packed: 48
BPS-680PG
Literature Holder
with Peghook
Packed: 36
BPS-680DPG
Literature Holder
with Peghook
Packed: 36
Pegboard
128
BROCHURE HOLDERS |
129
Pegboard
BPS-700PG
Literature Holder
with Peghook
Packed: 72
BPS-750PG
Literature Holder
with Peghook
Packed: 108
BPS-800PG
Literature Holder
with Peghook
Packed: 64
BPS-840PG
Literature Holder
with Peghook
Packed: 96
BPS-860PG
Literature Holder
with Peghook
Packed: 40
BPS-870PG
Literature Holder
with Peghook
Packed: 54
BROCHURE HOLDERS |
BPS-600ZB
Literature Holder
with Z Bar
for mounting.
Packed: 20
BPS-640ZB
Literature Holder
with Z Bar
for mounting.
Packed: 10
BPS-650ZB
Literature Holder
with Z Bar
Packed: 48
BPS-660ZB
Literature Holder
with Z Bar
Packed: 60
BPS-670ZB
Literature Holder
with Z Bar
Packed: 48
BPS-680ZB
Literature Holder
with Z Bar
Packed: 36
BPS-680DZB
Literature Holder
with Z Bar
Packed: 36
Slatwall
130
BROCHURE HOLDERS |
131
Slatwall
BPS-700ZB
Literature Holder
with Z Bar
Packed: 72
BPS-750ZB
Literature Holder
with Z Bar
Packed: 108
BPS-800ZB
Literature Holder
with Z Bar
Packed: 64
BPS-840ZB
Literature Holder
with Z Bar
Packed: 96
BPS-860ZB
Literature Holder
with Z Bar
Packed: 40
BPS-870ZB
Literature Holder
with Z Bar
Packed: 54
BROCHURE HOLDERS |
Pop-Up Literature Holders & Accessories
1051-1
Pop-Up LIterature Box
up to 3-5/8" wide. Overall size:
3-3/4"W x (3-1/2" x 4-1/2")H x
1-1/4"D with 1-1/2" flap. Flap
folds if not required.
Packed: Bulk
1051-2
4-1/4"W x (3-1/2" x 4-1/2")H x
Packed: Bulk
1051-3
5-1/2"W x (4-1/2" x 5-1/2")H x
Packed: Bulk
1051-4
5-1/4"W x (2-1/2" x 3")H x
Packed: Bulk
1051-5
3-3/4"W x (5-1/2" x 7")H x
Packed: Bulk
1051-6
6-1/4"W x (2-1/2" x 3")H x
Packed: Bulk
1051-7
3-1/8"W x (3" x 4")H x
Packed: Bulk
ADH-1
Foam Adhesive Pads
3"W x 3/4"H x 1/32" Thick. Price
includes installation. This item sold
attached to any literature holders.
Packed: Installation Included
132
BROCHURE HOLDERS |
133
Pop-Up Literature Holders & Accessories
2384
Spider Clips with Plugs
Natural polypropylene. Hold
pop-up boxes to various sizes
of price channel.
Packed: 500
2120
1" Long
Multi-Gripper with Plugs
White polypropylene. Hold pop-up
boxes to 1-1/4" channels, onto
wire and corrugated cases.
Packed: 250
102-100
1" Long
Sign Holder
material up to .065" thick. Fits
1-1/4" price channels.
Packed: 250
302-375
3/8" Long
Sign Holder
Co-extruded clear PVC. Fits wire
up to 5/16" dia. Accepts material
up to .065" thick. Narrower than
301-050, and will fit between
narrowest vertical wires.
Packed: 250
103-1050
1-1/2" Long
Sign Holder
Packed: 250
1055-1
Literature Pockets
Clear .015" PVC. With 3 adhesive
flaps. Ships flat. Holds literature
up to 4-1/8" wide.
4-1/4"W x 6"H x 1-1/4"D.
Packed: Bulk
1055-2
Literature Pockets
up to 4-1/8" wide.
4-1/4"W x 3-1/2"H x 1-1/4"D.
Packed: Bulk
1055-3
Literature Pockets
up to 5-1/8" wide.
5-1/4"W x 2-1/2"H x 1-1/4"D.
Packed: Bulk
BROCHURE HOLDERS |
BPS-73C
Memo Pad Holder
Available in clear or white with
white paper. Refills available.
4" x 6" x 1/2".
Packed: 184
BPS-74C
Memo Pad Holder
3-1/2" x 3-1/2" x 3-1/2".
Packed: 27
BPS-75C
Memo Pad Holder
4" x 4" x 1-1/2".
Packed: 72
BPS-76C
Memo Pad Holder
with Pen Holder
3" x 3" x 3".
Packed: 27
CT-CS
Countertop Catalog Stand
Clear. For material up to 8-1/2"
wide and 11" high. 1" diameter.
3-ring binder for catalogs.
Packed: 1
LST-1
Literature Stand
Clear plastic tray. Holds literature
up to 8-1/2" x 11". Approximate
overall size: 32" high with 17-1/4"
diameter pedestal base.
Packed: Carton
LST-2
Literature Stand with
Feature Sheet Holder
Clear plastic tray. Holds feature
sheet 8-1/2" x 11" and literature
8-1/2" x 11". Approximate overall
size: 39" high with 17-1/4"
diameter pedestal base.
Packed: Carton
Specialty Units
134
BROCHURE HOLDERS |
135
Fabricated (Standard or Custom)
FMO-2
"Flexi-Mold' Double-Tier
Literature Holder
White styrene back panel and
clear pockets. Overall size:
9"W x 15"H x 6-1/2"D Upper
level: 1 x 8-1/2"W pocket. Lower
level: 1 x 8-1/2" W pocket. For
wall or countertop use. With
extended back panels for logo
or sales message imprint at an
additional cost.
Packed: Polybag
FMO-4
Literature Holder
9"W x 12-1/4"H x 5-3/4"D Upper
level: 1 x 8-1/2"W pocket. Lower
level: 2 x 4" W pocket. For
additional cost.
Packed: Polybag
FMO-6
"Flexi-Mold' Single-Tier
Literature Holder
White styrene back panel
and clear pockets. Overall size:
17-3/4"W x 13"H x 5-1/4"D
Center: 1 x 8-1/2"W pocket.
Outer: 2 x 4" W pocket. For
extended back panels for
logo or sales message imprint
at an additional cost.
Packed: Polybag
FMO-8
Literature Holder
13-1/4"W x 12"H x 5-1/4"D
Upper level: 3 x 4"W pocket.
Lower level: 3 x 4" W pocket.
For wall or countertop use. With
additional cost.
Packed: Polybag
BROCHURE HOLDERS |
OBH 4x9
Outdoor Literature Holder
Clear lid. For literature 4"W x 9"H.
Lid protects literature from the
elements. Keeps literature upright.
Packed: 32
OBH 7x3
White lid. For literature 7"W x 3"H.
Packed: 24
OBH 9x4
White lid. For literature 9"W x 4"H.
Packed: 24
OBH TRIFOLD
White lid. For literature
4"W x 9"H. Lid protects literature
from the elements. Keeps
literature upright.
Packed: 15
OBH-2
White with clear front. For material
up to 8-1/2"W x 11"H. Lid protects
literature from the elements.
Keeps literature upright.
Packed: 18
OBH-2CI
Clear with black lid. For material
up to 8-1/2"W x 11"H. Lid protects
literature from the elements.
Keeps literature upright.
Packed: 18
Outdoor
136
BROCHURE HOLDERS |
137
Wire
78145CI
Wire Literature Holder
Magazine Size
Durable chrome wire literature
holders. Rubber feet protect
surfaces.
Packed: 3
78245CI
Wall Mount 3-Tier
Magazine Size
holders. Wall mount only.
Packed: 2
78345CI
3-Tier Magazine Size
surfaces.
Packed: 2
78445CI
2-Tier Leaflet Size
surfaces.
Packed: 3
78545CI
Leaflet Size
surfaces.
Packed: 4
BROCHURE HOLDERS |
FAC-1 – No Lock
FAC-2 – No Lock
FAB-1 – No Lock
Jumbo Ballot Box
FAB-2 – No Lock
Jumbo Ballot Box
Ballot & Coin Boxes
size: 5-7/8"W x 3-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: Polybag
takes card size 6"W x 4"H.
5-7/8"W x 8-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: Polybag
size: 11-1/2'W x 9-1/2"H x 8-1/2"D
4-1/4" wide slot.
Packed: Polybag
takes card size 11"W x 8-1/2"H.
11-1/2'W x 18"H x 8-1/2"D
4-1/4" wide slot.
Packed: Polybag
MBS-C1CI
Mini Coin Box
Clear styrene. Create interest in
give-aways and charities. Overall
size: 5"W x 3"H x 3-1/4"D
Packed: 7
MBS-C3CI
Mini Coin Box with
Header Card and Lock
Clear Lexan. Header card accepts
card size 5" wide x 7" high. Includes a set screw lock. Overall
size: 5"W x 10-5/16"H x 3-1/4"D
Packed: 7
138
BROCHURE HOLDERS |
139
Ballot & Coin Boxes
66001CI
Ballot Box with Header Card
Clear acrylic. Header card accepts
card size 8"W x 7"H. Optional
pocket attachments available
at additional cost. Overall size:
8"W x 8"H x 8"D
Packed: 2
66101CI
Ballot Box
Clear acrylic. Overall size:
8"W x 8"H x 8"D
Packed: 2
66201CI
Drop Box with Sign Holder
and Pocket
size: 5-7/8"W x 3-3/4"H x 4-1/4"D
3-1/2" wide slot.
Packed: 6
592901CI
Coin Box
6-3/8"W x 3-13/16"H x 4-1/4"D.
Packed: 6
66501CI
Coin Box
5-1/8"W x 3"H x 3-3/8"D.
Packed: 9
CBS-C w/PKT4
and Side Pocket
cost. Overall size:
6-3/4"W x 5"H x 8-3/4"D.
Packed: 12
BROCHURE HOLDERS |
Business Card Holders
350150CI
Holds over 50 cards. Chrome rods
hold cards upright. White frosted
plastic base.
Packed: 6
41590CI
Holds over 65 cards. Green
tinted edges.
Packed: 52
35870CI
Holds over 65 cards. Curved
polished black and white
plastic panels.
Packed: 6
70104CI
Black. Holds over 65 cards.
Packed: 84
BPS-50CI
Clear. For countertop use.
Packed: 288
70604CI
Multi-Compartment Wall
Mount Business Card Holder
Black. 6 compartments. Features
holes for mounting.
Packed: 6
140
BROCHURE HOLDERS |
141
70404CI
Multi-Compartment
Black. 4 compartments.
Packed: 12
BPS-55-4CI
Clear. Holds over 65 cards.
Packed: 108
BPS-56C
Clear. 6 compartments.
Packed: 100
R55C-6
Packed: 24
70804CI
Multi-Compartment
Black. 8 compartments.
Packed: 6
BPS-58C
Multi-Compartment
Packed: 6
BROCHURE HOLDERS |
TK-VBC
Clear. For countertop use. Vertical.
Packed: 180
TK-VBC2
Clear. For countertop use. Vertical
side by side.
Packed: 84
CS-55CI
Clear. For countertop u se.
Packed: 84
CS-55C
Clear. Attach to any holder
or ad frame.
Packed: 24
CS-55CGP
Clear. Attach to any ad holder
or ad frame
Packed: 150
BPS-55CI
Clear. Attach to any ad holder
or frame.
Packed: 400
142
BROCHURE HOLDERS |
Brochure / Magazine Stands
VIS-1W
White – 6 pockets
VIS-1G
Grey – 6 pockets
Panorama Wall Display
PAN-1W
White – 3 pockets
PAN-1G
Grey – 3 pockets
Panorama I Wall Display
PAN-2W
White – 6 pockets
PAN-2G
Grey – 6 pockets
Panorama II Wall Display
PAN-3W
White – 4 pockets
PAN-3G
Grey – 4 pockets
Panorama III Wall Display
PAN-4W
White – 4 pockets
PAN-4G
Grey – 4 pockets
Panorama IV Wall Display
PAN-5W
White – 8 pockets
PAN-5G
Grey – 8 pockets
Panorama V Wall Display
143
White or grey plastic body with
clear pockets. Holds literature
5-1/4"W x 27"H x 3"D.
Packed: Individual carton
10-1/2"W x 20-1/2"H x 3-1/4"D.
19-3/4"W x 20-1/2"H x 3-1/4"D.
7-1/4"W x 20-1/2"H x 3-1/4"D.
5-1/4"W x 20-1/2"H x 3-1/4"D.
10"W x 20-1/2"H x 3-1/4"D.
BROCHURE HOLDERS |
TD-5W
White – 5 pockets
TD-5G
Grey – 5 pockets
Totem Wall Display
TD-8W
White – 8 pockets
TD-8G
Grey – 8 pockets
Totem Wall Display
PAN-1FW
White – 3 pockets
PAN-1FG
Grey – 3 pockets
Panorama Revolving Floor Stand
PAN-2FW
White – 6 pockets
PAN-2FG
Grey – 6 pockets
PAN-5FW
White – 8 pockets
PAN-5FG
Grey – 8 pockets
PAN-1CW
White – 3 pockets
PAN-1CG
Grey – 3 pockets
Panorama Revolving
Counter Stand
White or grey plastic body
molding with 5 clear pockets.
One sided. Holds literature up
to 8-1/2" wide. Overall size:
10-1/2"W x 42"H x 4-3/4"D.
Packed: Carton
molding with 8 clear pockets.
One sided. Holds literature up
to 8-1/2" wide. Overall size:
20-1/2"W x 35"H x 4-3/4"D.
Packed: Carton
6 clear pockets, 3 on each side.
10-1/2"W x 55"H x 6-1/2"D.
Packed: Carton
19-3/4"W x 55"H x 6-1/2"D.
Packed: Carton
Holds two banks of literature up
to 4" wide, side-by-side.
10-1/4"W x 55"H x 6-1/2"D.
Packed: Carton
10-1/2"W x 23"H x 6-1/2"D.
Packed: Carton
144
BROCHURE HOLDERS |
TD-10W
White – 5 pockets
TD-10G
Grey – 6 pockets
Totem Revloving Floor Stand
TD-16W
White – 8 pockets
TD-16G
Grey – 8 pockets
Totem Revolving Floor Stand
145
with 10 clear pockets (5 on
each side). Holds literature up
to 8-1/2" wide. Heavy metal
frame construction. Overall size:
10-1/2"W x 68"H x 7-1/2"D.
Packed: 2 Cartons
with 16 clear pockets (8 on
each side). Holds literature up
to 8-1/2" wide. Heavy metal
frame construction. Overall size:
20-1/2"W x 63"H x 7-1/2"D.
Packed: 2 Cartons
RDT-4
Revolving Floor Stand
4-sided, revolving unit. 4 clear
magazine size pockets on each
side. Holds literature up to
8-1/2"W x 11"H. Overall size:
15"W x 64"H x 15"D.
RDT-TC
Revolving Floor Stand
Travel Case
Travel case for RDT-4.
BROCHURE HOLDERS |
BPS-702CI
Single Unit
BPS-702-2CI
Double Unit (side by side)
Multi-Tier Literature Holder
BPS-703CI
Single Unit
BPS-703-2CI
BPS-802CI
Single Unit
BPS-802-2CI
Multi-Tier Units
wide. 2 compartments. Features
holes for mounting.
BPS-702CI Packed: 42
BPS-702-2CI Packed: 14
holes for mounting.
wide. 2 compartments.
BPS-803CI
Single Unit
BPS-803-2CI
holes for mounting.
MPS-4
Clear. For material up to 4"
wide. 4 compartments, 2 tier.
For countertop use only.
Packed: 7
MPS-6
Packed: 8
MPS-12
Packed: 2
146
BROCHURE HOLDERS |
147
Multi-Tier Units
MLS-3-8.5
Multi-Compartment
Literature Holder
wide. 3 compartments. 3 tier. For
countertop or wall mount use.
Packed: 8
MLS-6
Multi-Compartment
Literature Holder
Packed: 8
MLS-9
Multi-Compartment
Literature Holder
Packed: 4
MLS-12
Multi-Compartment
Literature Holder
Packed: 2
TK-4-2CI
Multi-Compartment
Literature Holder
Clear. For material up to 4" wide.
for mounting.
Packed: 12
TK-4-4CI
Multi-Compartment
Literature Holder
for mounting.
Packed: 16
TK-6-4CI
Multi-Compartment
Literature Holder
holes for mounting.
Packed: 4
TK-8.5-2CI
Multi-Compartment
Literature Holder
Packed: 8
TK-8.5-3C
Multi-Compartment
Literature Holder
8-1/2" wide. 3 tier.
Packed: 6
BROCHURE HOLDERS |
TK-8.5-3CI
Multi-Compartment
Literature Holder
wide. 3 compartments. For
Packed: 8
TK-8.5-3DC
Multi-Compartment
Literature Holder
wide. 3 tier. 6 compartments.
Packed: 6
TK-8.5-3DCI
Multi-Compartment
Literature Holder
holes for mounting.
Packed: 8
TK-8.5-4CI
Multi-Compartment
Literature Holder
holes for mounting.
Packed: 4
TK-8.5-4DCI
Multi-Compartment
Literature Holder
holes for mounting.
Packed: 4
RTK4-4-2CI
Multi-Compartment
Literature Holder
8 compartments.
Packed: 12
RTK6-4-2CI
Multi-Compartment
Literature Holder
8 compartments.
Packed: 6
RTK8.5-3-2CI
Multi-Compartment
Literature Holder
Packed: 5
RTK8.5-4-2CI
Multi-Compartment
Literature Holder
Packed: 5
Multi-Tier Units
148
BROCHURE HOLDERS |
149
Optional Attachments
ADH-1
Foam Adhesive Pads
3"W x 3/4"H x 1/32"thick
SB-1
White plastic. Fits most standard
slatwall. Two might be required
for larger units. Price includes
installation. This item is sold
attached to any print or
brochure holders.
PB-1
Pegboard Bracket
White plastic. Fits standard 1/4"
for larger units. Price includes
installation. This item is sold
attached to print or brochure
holders.
R CLIP
R Clip for Wire
For wire. Up to 5" wide
installed with tape.
AT-1
Expand-A-Lok
White nylon. Joins two or more
multi-tier units, side-by-side. Use
two clips per join. Push fit fastener,
holds two panels together. Fits
.125" dia. holes. Accepts up
to .250" thickness.
Packed: 100
ARC PRICE 1
Price Channel Clip
Includes adhesive.
Packed: Bulk
BROCHURE HOLDERS |
Optional Attachments
TK-8.5-CDI
Divider
Use on BPS Series 600, 613, 618,
680, 690, 870 and TK-8.5 Series.
Availble in clear or white.
Packed: Bulk
BPS-12C
Sign Base
Clear. 2" wide.
Packed: Bulk
BPS-13C
Sign Base
Clear. 3" wide.
Packed: Bulk
BPS-15C
Sign Base
Clear. 5" wide.
Packed: Bulk
BPS Base 1
Literature Holder Base
Clear. Use on BPS Series 600CI,
700CI, 750CI, 800CI, 840CI, 870CI
Packed: Bulk
BPS Base 2
Literature Holder Base
Clear. Use on BPS Series 640CI,
650CI, 670CI, 860CI
Packed: Bulk
150

SIGN HOLDERS

Transcription

Similar documents

LGOBO SALE SHEET

Icopal SFT Adhesive - Siplast International

Fernco PlumbQwik Couplings

DID drive chain tool recommendation

PVCeptor® Reservoir Dog™

Mini Lingual Spur Educator

For HOTEL SOLUTIONS - Sangyug Enterprises Ltd

critical selection of primary packaging

PVC vertical sliding window Prefabricated building

chain installation and maintenance instructions