Roll-Fast Doors

e
h
t
B
t
s
e
S900 - S1000
ROLL-FAST
y
l
r
a
e ECONOMY DOORS / INTERNAL
l
C
S900 - S1000
An economical high speed door that
improves productivity and saves money by providing
you with . . .
IMPROVED TRAFFIC FLOW
Opening speed of 900mm per second
without frequency inverter.
Opening speed of 1000mm per second
with frequency inverter.
TOP AIR SEAL
Reduces the gap between the building wall
and Roll-Fast Door to prevent energy loss.
ADOORMOVINGPRACTICALLYNONSTOPMUSTALSOBEHIGHLYDURABLE
The modern frequency inverter control
system provides the door with a "soft" start
on opening, and a "soft" stop on closing.
This means, even in continuous operation,
virtually no wear, and as a result, minimum
maintenance.
RELIABLE PERFORMANCE
Even under the most demanding roundthe-clock use the Roll-Fast Door cycles
completely without fail.
LOW MAINTENANCE AND REPAIR COSTS
With the Economy Roll-Fast Door, downtime is
significantly reduced and repairs, when needed, are
quick and easy.
SERVICE AND SPARE PARTS
As Roll-Fast Doors are made in Australia, service and spare
parts, should they be required, are readily available at all
times.
The cost of repairing a normal door over one year could
actually cover the installation of a Roll-Fast Door. RollFast Doors are easy to clean, retaining that new look.
CUSTOM MOTOR
CONTROL OPTIONS
The Roll-Fast Door is powered Many types of opening
by a motor specifically
and closing controls are
designed for these doors.
available to match your exact
requirements.
Economy Roll-Fast Door
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
Economy Roll-Fast Doors are normally produced for internal
Opening sizes up to 4000 mm H x 3000 mm W.
Larger internal applications upon request.
Distributed by:
Clearly the best - SEUSTER Roll-Fast Doors
Push Button:
Photo Electric Cell:
Induction Loop:
Least expensive way to control door
movement.
By breaking the beam, the door opens,
then closes by time delay.
The loop in the floor reacts by
magnetic attraction to open the
door. Loops can operate for one
way or two way traffic. (Specify
“one way loop” or “two way loop”).
Remote Control:
Pull Switch:
Motion Detector:
A radio transmitter carried by the
driver.
Driver operates pull switch without
dismounting. Time delay ensures door
closes after use.
The detector beam detects
movement and activates the door.
M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening
speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels.
On very windy openings the panel can incorporate wind bars.
Select the control most suited to your needs from the above illustrations.
For total environmental control:Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.
For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.
MELBOURNE
STANDARD FEATURES INCLUDE:
FIRST CHOICE:
55 Northern Road,
West Heidelberg, VIC. 3081
Telephone: (03) 9540 1900
Fax: (03) 9458 3217
Photo Electric Cell In Door Line.
Bottom Safety Edge For Auto Reverse.
Red Safety Vision Strip.
Running Time Limit Controller.
Cycle Counter.
Main Isolator Switch (1).
Electronic Microprocessor.
In Hospitals,
Food Factories,
Milk & Dairy Plants,
Hotels, Restaurants,
Chillers, Freezers,
Cold Storage Complexes,
All Light & Heavy
Industry Situations.
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT
ON M.T.I. “SEE-THRU” FLEXIBLE DOORS
BY THE DESIGN COUNCIL OF AUSTRALIA
5 NOVEMBER 1982
GENERAL:
The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is
made in Australia under the Swiss patent held by Sigerist & Co., qualified for
Design Council Selection.
The panel commended the manufacturer on the quality of the construction
and the unique design features in supporting the PVC sheeting, allowing it to
accommodate movement due to the different co-efficient of expansion
between the PVC and the steel door frame, thereby ensuring the PVC panels
will stay flat sealing the doorway.
FUNCTION:
The panel was impressed with the visibility through the PVC door sheeting,
even after several years of use. A sample of worn PVC sheet provided
evidence of the design criteria and confirmed the safety aspects of the M.T.I.
Qualos Pty. Ltd., door.
The self-closing mechanism is concealed in the steel top frame and can be
easily adjusted to give a desired closing pressure with maximum resistance to
draughts in the closed position.
Another innovative feature is the cam that is connected to the closure. This
can be set to hold the door open 90° if required.
The panel considered the provision of steel mounting frames, which are made
to measure, a good format. They ensure that the doors are hung in a square
and workmanlike manner. The door frame fixing is achieved by bolting
through the frame to the opening with approximate size, style and number of
connections to suit the building construction.
SAFETY:
The panel commended the location and design of the hinges, which
incorporated a shear-pin in the bottom hinge, designed to give way on impact
to protect the door structure. This is susceptible to damage from careless
forklift operations and the shear-pin greatly reduces the risks. Replacement of
this part is simple and inexpensive and hinge size can be selected depending
on the size of the door.
A desirable feature of this shear-pin arrangement is that in the event of an
accident the door remains upright on the top hinge, so avoiding injury.
…/2.
-2-
CONSTRUCTION:
The unique roll formed steel door frame, which contains the PVC panels,
provides a very neat solution to industrial door closures. The all-welded frame
and gusset are strong and well finished.
The panel was also impressed with the system of reinforcing the PVC material
wherever high stress points occurred.
Stainless steel hinges and galvanised steel frames are provided for food area
applications.
DURABILITY:
The construction was considered to be virtually maintenance free except for
periodic greasing of the closure mechanism and the cleaning of the PVC
sheeting.
VALUE:
The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors
were competitive and represented good value for money, satisfying a current
need for this style of industrial door in a very effective manner.
AESTHETICS:
The panel commended the quality of finish and the general appearance of the
door particularly the clean lines with absence of surface fixings.
CONCLUSION:
The assessment panel recommended that the "See-Thru" Flexible Swing
Doors be granted DESIGN COUNCIL SELECTION.
t
s
e
C
l
r
a
e
S 800
B
e
h
t ROLL-FAST DOORS
y
l
EXTERNAL
S 800
The Robust Vertically Opening Door
for Continuous Demanding Operation
For normal external traffic-flow
situations: light, friendly and safe
max.
500cm
max.
600cm
A heavy-duty version with 4 mm thick,
fully transparent curtain ensuring safe
transport routes and good visual
contact.
The opening speed of 0.8 m/s is
designed for doors up 5000mm H x
6000mm W in normal operation. The
tried-and-tested
inversion
relay
control system is entirely sufficient to
ensure safe door operation.
Fold-out
sideframes
facilitate
maintenance
procedures.
The
operator and shaft are borne by the
cantilever sideframes housing the
photocell, energy chain and the side
tensioning and pull mechanism. Brush
seals reduce drafts.
When the S 800 is exposed to high
wind pressures, we recommend using
additional aluminium wind safety
profiles to give the curtain the
necessary stability. By using the wind
safety profile, a vinyl panel and fully
transparent curtain can also be
combined.
Controls
Various types of
opening and closing
control systems are
available to meet
individual
operational
requirements.
Induction loop, radio
control, radar,
photocell, pushbutton or pull-switch.
Every door is
supplied with a
programmable
controller.
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax:
(02) 9756 5666
Distributed by:
Clearly the best - SEUSTER Roll-Fast Doors
Push Button:
Photo Electric Cell:
Induction Loop:
Least expensive way to control door
movement.
By breaking the beam, the door opens,
then closes by time delay.
The loop in the floor reacts by
magnetic attraction to open the
door. Loops can operate for one
way or two way traffic. (Specify
“one way loop” or “two way loop”).
Remote Control:
Pull Switch:
Motion Detector:
A radio transmitter carried by the
driver.
Driver operates pull switch without
dismounting. Time delay ensures door
closes after use.
The detector beam detects
movement and activates the door.
M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening
speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels.
On very windy openings the panel can incorporate wind bars.
Select the control most suited to your needs from the above illustrations.
For total environmental control:Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.
For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.
MELBOURNE
STANDARD FEATURES INCLUDE:
FIRST CHOICE:
55 Northern Road,
West Heidelberg, VIC. 3081
Telephone: (03) 9540 1900
Fax: (03) 9458 3217
Photo Electric Cell In Door Line.
Bottom Safety Edge For Auto Reverse.
Red Safety Vision Strip.
Running Time Limit Controller.
Cycle Counter.
Main Isolator Switch (1).
Electronic Microprocessor.
In Hospitals,
Food Factories,
Milk & Dairy Plants,
Hotels, Restaurants,
Chillers, Freezers,
Cold Storage Complexes,
All Light & Heavy
Industry Situations.
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT
ON M.T.I. “SEE-THRU” FLEXIBLE DOORS
BY THE DESIGN COUNCIL OF AUSTRALIA
5 NOVEMBER 1982
GENERAL:
The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is
made in Australia under the Swiss patent held by Sigerist & Co., qualified for
Design Council Selection.
The panel commended the manufacturer on the quality of the construction
and the unique design features in supporting the PVC sheeting, allowing it to
accommodate movement due to the different co-efficient of expansion
between the PVC and the steel door frame, thereby ensuring the PVC panels
will stay flat sealing the doorway.
FUNCTION:
The panel was impressed with the visibility through the PVC door sheeting,
even after several years of use. A sample of worn PVC sheet provided
evidence of the design criteria and confirmed the safety aspects of the M.T.I.
Qualos Pty. Ltd., door.
The self-closing mechanism is concealed in the steel top frame and can be
easily adjusted to give a desired closing pressure with maximum resistance to
draughts in the closed position.
Another innovative feature is the cam that is connected to the closure. This
can be set to hold the door open 90° if required.
The panel considered the provision of steel mounting frames, which are made
to measure, a good format. They ensure that the doors are hung in a square
and workmanlike manner. The door frame fixing is achieved by bolting
through the frame to the opening with approximate size, style and number of
connections to suit the building construction.
SAFETY:
The panel commended the location and design of the hinges, which
incorporated a shear-pin in the bottom hinge, designed to give way on impact
to protect the door structure. This is susceptible to damage from careless
forklift operations and the shear-pin greatly reduces the risks. Replacement of
this part is simple and inexpensive and hinge size can be selected depending
on the size of the door.
A desirable feature of this shear-pin arrangement is that in the event of an
accident the door remains upright on the top hinge, so avoiding injury.
…/2.
-2-
CONSTRUCTION:
The unique roll formed steel door frame, which contains the PVC panels,
provides a very neat solution to industrial door closures. The all-welded frame
and gusset are strong and well finished.
The panel was also impressed with the system of reinforcing the PVC material
wherever high stress points occurred.
Stainless steel hinges and galvanised steel frames are provided for food area
applications.
DURABILITY:
The construction was considered to be virtually maintenance free except for
periodic greasing of the closure mechanism and the cleaning of the PVC
sheeting.
VALUE:
The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors
were competitive and represented good value for money, satisfying a current
need for this style of industrial door in a very effective manner.
AESTHETICS:
The panel commended the quality of finish and the general appearance of the
door particularly the clean lines with absence of surface fixings.
CONCLUSION:
The assessment panel recommended that the "See-Thru" Flexible Swing
Doors be granted DESIGN COUNCIL SELECTION.
e
h
t
B
t
s
e
S 1100
ROLL-FAST DOORS
y
l
r
a
e INTERNAL / EXTERNAL
l
C
S 1100
For quick easy access
Reliability and Performance
Performance
Opening speed is 1.1 m/sec. and
closing speed is 0.5 m/sec.
Technical details
A self-supporting, easy-to-install
construction, consisting of two side
guides and a top roller. The top roller
is electrically powered and moves the
plastic fabric door curtain rapidly up or
down. A control box provides operator
controls, monitors the door curtain
movements and the safety features.
Construction
Galvanized, bolt-on steel sheet side
frames with integral guides for the door
curtain and integral sealing brushes.
Flexible conduit houses power cables
to safety edge. Top roll is made, of
precision drawn steel tube.
Door curtain
Plastic reinforced fabric 1.5 mm thick,
constructed in three sections and
separated by aluminium wind bars.
Central section is transparent PVC
Vision Panel stretching from 1400 mm
to 2400 mm above floor. Aluminium
bottom rail with self-monitoring safety
edge and rubber seal.
Drive
SEUSTER compact electric motor /
gearbox combination ready for keying
to top roller. Fitted with magnetoelectric brake and 6 limit switches
mounted directly on the shaft. Drive is
mounted right, but can optionally be
mounted left. Motor specifications are
240 V, 50 Hz, 16A. Output 0.65 kW, IP
54.
Controls
Controller is equipped with an inverter
to ensure fast, smooth operation on
acceleration and braking. Any normal
pulse generator, time-delay relays or
diagnostic LED's may be connected.
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
Distributed by:
Operation
In addition to the OPEN/STOP/CLOSE
push buttons mounted on the face of
the control box, there is a lockable
mains isolator and an emergency stop
button. Any of the following may also
be incorporated: push buttons, remote
control system, pull cords, radar,
induction loops, airlock-type controls.
Intermediate stop freely adjustable to
suit.
Safety
These doors are manufactured
and supplied with a self-monitoring
safety edge which reverses the
door on impact and an anti-crash
mechanism. There is a safety photo
electric cell mounted within the side
frame preventing the door closing if
obstructed. An emergency cranking
facility is also supplied for opening
during power failure.
Clearly the best - SEUSTER Roll-Fast Doors
Push Button:
Photo Electric Cell:
Induction Loop:
Least expensive way to control door
movement.
By breaking the beam, the door opens,
then closes by time delay.
The loop in the floor reacts by
magnetic attraction to open the
door. Loops can operate for one
way or two way traffic. (Specify
“one way loop” or “two way loop”).
Remote Control:
Pull Switch:
Motion Detector:
A radio transmitter carried by the
driver.
Driver operates pull switch without
dismounting. Time delay ensures door
closes after use.
The detector beam detects
movement and activates the door.
M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening
speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels.
On very windy openings the panel can incorporate wind bars.
Select the control most suited to your needs from the above illustrations.
For total environmental control:Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.
For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.
MELBOURNE
STANDARD FEATURES INCLUDE:
FIRST CHOICE:
55 Northern Road,
West Heidelberg, VIC. 3081
Telephone: (03) 9540 1900
Fax: (03) 9458 3217
Photo Electric Cell In Door Line.
Bottom Safety Edge For Auto Reverse.
Red Safety Vision Strip.
Running Time Limit Controller.
Cycle Counter.
Main Isolator Switch (1).
Electronic Microprocessor.
In Hospitals,
Food Factories,
Milk & Dairy Plants,
Hotels, Restaurants,
Chillers, Freezers,
Cold Storage Complexes,
All Light & Heavy
Industry Situations.
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT
ON M.T.I. “SEE-THRU” FLEXIBLE DOORS
BY THE DESIGN COUNCIL OF AUSTRALIA
5 NOVEMBER 1982
GENERAL:
The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is
made in Australia under the Swiss patent held by Sigerist & Co., qualified for
Design Council Selection.
The panel commended the manufacturer on the quality of the construction
and the unique design features in supporting the PVC sheeting, allowing it to
accommodate movement due to the different co-efficient of expansion
between the PVC and the steel door frame, thereby ensuring the PVC panels
will stay flat sealing the doorway.
FUNCTION:
The panel was impressed with the visibility through the PVC door sheeting,
even after several years of use. A sample of worn PVC sheet provided
evidence of the design criteria and confirmed the safety aspects of the M.T.I.
Qualos Pty. Ltd., door.
The self-closing mechanism is concealed in the steel top frame and can be
easily adjusted to give a desired closing pressure with maximum resistance to
draughts in the closed position.
Another innovative feature is the cam that is connected to the closure. This
can be set to hold the door open 90° if required.
The panel considered the provision of steel mounting frames, which are made
to measure, a good format. They ensure that the doors are hung in a square
and workmanlike manner. The door frame fixing is achieved by bolting
through the frame to the opening with approximate size, style and number of
connections to suit the building construction.
SAFETY:
The panel commended the location and design of the hinges, which
incorporated a shear-pin in the bottom hinge, designed to give way on impact
to protect the door structure. This is susceptible to damage from careless
forklift operations and the shear-pin greatly reduces the risks. Replacement of
this part is simple and inexpensive and hinge size can be selected depending
on the size of the door.
A desirable feature of this shear-pin arrangement is that in the event of an
accident the door remains upright on the top hinge, so avoiding injury.
…/2.
-2-
CONSTRUCTION:
The unique roll formed steel door frame, which contains the PVC panels,
provides a very neat solution to industrial door closures. The all-welded frame
and gusset are strong and well finished.
The panel was also impressed with the system of reinforcing the PVC material
wherever high stress points occurred.
Stainless steel hinges and galvanised steel frames are provided for food area
applications.
DURABILITY:
The construction was considered to be virtually maintenance free except for
periodic greasing of the closure mechanism and the cleaning of the PVC
sheeting.
VALUE:
The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors
were competitive and represented good value for money, satisfying a current
need for this style of industrial door in a very effective manner.
AESTHETICS:
The panel commended the quality of finish and the general appearance of the
door particularly the clean lines with absence of surface fixings.
CONCLUSION:
The assessment panel recommended that the "See-Thru" Flexible Swing
Doors be granted DESIGN COUNCIL SELECTION.
e
h
t
B
t
s
e
S 1300
ROLL-FAST DOORS
y
l
r
a
e EXTERNAL / INTERNAL
l
C
S 1300
The Door with quick manual opening
for emergency access
This vertically opening high-speed
door really does have it all!
max.
500cm
max.
500cm
Over and above the structural
features of the S 1100 door type, this
vertically opening high-speed door
boasts a size range up to 5000mm
H x 5000mm W and an even higher
opening speed of 1.3 m/sec.
Full range of equipment inclusive
Compact direct drive with integral
gearbox safety device, electronic limit
switches, frequency inverter controls
with 7-segment display, functionmonitoring, closing edge safety
device, photocell to monitor the traffic
path and brush seals to reduce drafts
and ensure a quiet door action.
Maintenance-friendly
The fold-out sideframes make it quick
and easy to carry out maintenance
work.
Emergency opening in a matter of
seconds
Thanks to the counterbalance weight,
the door can be opened by pull rope
in no time at all. The counter weight
(a standard feature) relieves the
operator.
Controls
Various types of opening and closing
control systems are available to meet
individual operational requirements.
Induction loop, radio control, radar,
photocell, push-button or pull-switch.
Every door is supplied with a
programmable controller.
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
Distributed by:
Clearly the best - SEUSTER Roll-Fast Doors
Push Button:
Photo Electric Cell:
Induction Loop:
Least expensive way to control door
movement.
By breaking the beam, the door opens,
then closes by time delay.
The loop in the floor reacts by
magnetic attraction to open the
door. Loops can operate for one
way or two way traffic. (Specify
“one way loop” or “two way loop”).
Remote Control:
Pull Switch:
Motion Detector:
A radio transmitter carried by the
driver.
Driver operates pull switch without
dismounting. Time delay ensures door
closes after use.
The detector beam detects
movement and activates the door.
M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening
speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels.
On very windy openings the panel can incorporate wind bars.
Select the control most suited to your needs from the above illustrations.
For total environmental control:Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.
For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.
MELBOURNE
STANDARD FEATURES INCLUDE:
FIRST CHOICE:
55 Northern Road,
West Heidelberg, VIC. 3081
Telephone: (03) 9540 1900
Fax: (03) 9458 3217
Photo Electric Cell In Door Line.
Bottom Safety Edge For Auto Reverse.
Red Safety Vision Strip.
Running Time Limit Controller.
Cycle Counter.
Main Isolator Switch (1).
Electronic Microprocessor.
In Hospitals,
Food Factories,
Milk & Dairy Plants,
Hotels, Restaurants,
Chillers, Freezers,
Cold Storage Complexes,
All Light & Heavy
Industry Situations.
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT
ON M.T.I. “SEE-THRU” FLEXIBLE DOORS
BY THE DESIGN COUNCIL OF AUSTRALIA
5 NOVEMBER 1982
GENERAL:
The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is
made in Australia under the Swiss patent held by Sigerist & Co., qualified for
Design Council Selection.
The panel commended the manufacturer on the quality of the construction
and the unique design features in supporting the PVC sheeting, allowing it to
accommodate movement due to the different co-efficient of expansion
between the PVC and the steel door frame, thereby ensuring the PVC panels
will stay flat sealing the doorway.
FUNCTION:
The panel was impressed with the visibility through the PVC door sheeting,
even after several years of use. A sample of worn PVC sheet provided
evidence of the design criteria and confirmed the safety aspects of the M.T.I.
Qualos Pty. Ltd., door.
The self-closing mechanism is concealed in the steel top frame and can be
easily adjusted to give a desired closing pressure with maximum resistance to
draughts in the closed position.
Another innovative feature is the cam that is connected to the closure. This
can be set to hold the door open 90° if required.
The panel considered the provision of steel mounting frames, which are made
to measure, a good format. They ensure that the doors are hung in a square
and workmanlike manner. The door frame fixing is achieved by bolting
through the frame to the opening with approximate size, style and number of
connections to suit the building construction.
SAFETY:
The panel commended the location and design of the hinges, which
incorporated a shear-pin in the bottom hinge, designed to give way on impact
to protect the door structure. This is susceptible to damage from careless
forklift operations and the shear-pin greatly reduces the risks. Replacement of
this part is simple and inexpensive and hinge size can be selected depending
on the size of the door.
A desirable feature of this shear-pin arrangement is that in the event of an
accident the door remains upright on the top hinge, so avoiding injury.
…/2.
-2-
CONSTRUCTION:
The unique roll formed steel door frame, which contains the PVC panels,
provides a very neat solution to industrial door closures. The all-welded frame
and gusset are strong and well finished.
The panel was also impressed with the system of reinforcing the PVC material
wherever high stress points occurred.
Stainless steel hinges and galvanised steel frames are provided for food area
applications.
DURABILITY:
The construction was considered to be virtually maintenance free except for
periodic greasing of the closure mechanism and the cleaning of the PVC
sheeting.
VALUE:
The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors
were competitive and represented good value for money, satisfying a current
need for this style of industrial door in a very effective manner.
AESTHETICS:
The panel commended the quality of finish and the general appearance of the
door particularly the clean lines with absence of surface fixings.
CONCLUSION:
The assessment panel recommended that the "See-Thru" Flexible Swing
Doors be granted DESIGN COUNCIL SELECTION.
rly
C
a
e
l
e
h
t
t
s
e
B
S 1400
ROLL-FAST DOORS
INTERNAL / FREEZER
S 1400
When quick access is required
the S1400 Internal Roll Fast Door is the answer
Technical details
A self-supporting, easy-to-install
construction, consisting of two side
guides and a top roller. The top roller
is electrically powered and moves
the plastic fabric door curtain rapidly
up and down. A control box provides
operator controls, monitors the door
curtain movements and the safety
features.
Construction
Galvanized, bolt-on steel sheet side
frames with integral guides for the door
curtain and integral sealing brushes.
Top roll is made of precision drawn
steel tube.
Door curtain
Plastic reinforced fabric 1.5 mm thick,
constructed in three sections and
separated by aluminium wind bars.
Central section is transparent PVC
Vision Panel stretching from 1400 mm
to 2400 mm above floor. Aluminium
bottom rail with self-monitoring safety
edge and rubber seal.
Drive
SEUSTER compact electric motor /
gearbox combination ready for keying
to top roller. Fitted with magnetoelectric brake and 6 limit switches
mounted directly on the shaft. Drive is
mounted right, but can optionally be
mounted left. Motor specifications are
240 V, 50 Hz, 16A. Output 1.1kW,
IP 54.
Performance
Opening speed is 1.4 m/sec. and
closing speed is 0.5 m/sec.
Controls
Controller is equipped with an inverter
to ensure fast, smooth operation on
acceleration and braking. Any normal
pulse generator, time-delay relays or
diagnostic LED's may be connected.
Operation
In addition to the OPEN/STOP/CLOSE
push buttons mounted on the face of
the control box, there is a lockable
mains isolator and an emergency stop
button. Any of the following may also
be incorporated: push buttons, remote
control system, pull cords, radar,
induction loops, airlock-type controls.
Intermediate stop freely adjustable to
suit.
Safety
These doors are manufactured
and supplied with a self-monitoring
safety edge which reverses the
door on impact and an anti-crash
mechanism. There is a safety photo
electric cell mounted within the side
frame preventing the door closing if
obstructed. An emergency cranking
facility is also supplied for opening
during power failure.
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
Distributed by:
Clearly the best - SEUSTER Roll-Fast Doors
Push Button:
Photo Electric Cell:
Induction Loop:
Least expensive way to control door
movement.
By breaking the beam, the door opens,
then closes by time delay.
The loop in the floor reacts by
magnetic attraction to open the
door. Loops can operate for one
way or two way traffic. (Specify
“one way loop” or “two way loop”).
Remote Control:
Pull Switch:
Motion Detector:
A radio transmitter carried by the
driver.
Driver operates pull switch without
dismounting. Time delay ensures door
closes after use.
The detector beam detects
movement and activates the door.
M.T.I. Roll-Fast Doors are automatic rapid opening and closing roller doors with various opening
speeds. The door inserts come in either 4mm thick clear PVC panels or 1.5mm thick vinyl panels.
On very windy openings the panel can incorporate wind bars.
Select the control most suited to your needs from the above illustrations.
For total environmental control:Dust, fumes, noise, process separation, temperature control, draught, exclusion of birds and insects.
For assistance in specifying the requirements for your doors, consult M.T.I. QUALOS PTY. LTD.
MELBOURNE
STANDARD FEATURES INCLUDE:
FIRST CHOICE:
55 Northern Road,
West Heidelberg, VIC. 3081
Telephone: (03) 9540 1900
Fax: (03) 9458 3217
Photo Electric Cell In Door Line.
Bottom Safety Edge For Auto Reverse.
Red Safety Vision Strip.
Running Time Limit Controller.
Cycle Counter.
Main Isolator Switch (1).
Electronic Microprocessor.
In Hospitals,
Food Factories,
Milk & Dairy Plants,
Hotels, Restaurants,
Chillers, Freezers,
Cold Storage Complexes,
All Light & Heavy
Industry Situations.
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
EXTRACTS FROM THE PRODUCT ASSESSMENT REPORT
ON M.T.I. “SEE-THRU” FLEXIBLE DOORS
BY THE DESIGN COUNCIL OF AUSTRALIA
5 NOVEMBER 1982
GENERAL:
The panel was satisfied that the M.T.I. Qualos "See-Thru" Door, which is
made in Australia under the Swiss patent held by Sigerist & Co., qualified for
Design Council Selection.
The panel commended the manufacturer on the quality of the construction
and the unique design features in supporting the PVC sheeting, allowing it to
accommodate movement due to the different co-efficient of expansion
between the PVC and the steel door frame, thereby ensuring the PVC panels
will stay flat sealing the doorway.
FUNCTION:
The panel was impressed with the visibility through the PVC door sheeting,
even after several years of use. A sample of worn PVC sheet provided
evidence of the design criteria and confirmed the safety aspects of the M.T.I.
Qualos Pty. Ltd., door.
The self-closing mechanism is concealed in the steel top frame and can be
easily adjusted to give a desired closing pressure with maximum resistance to
draughts in the closed position.
Another innovative feature is the cam that is connected to the closure. This
can be set to hold the door open 90° if required.
The panel considered the provision of steel mounting frames, which are made
to measure, a good format. They ensure that the doors are hung in a square
and workmanlike manner. The door frame fixing is achieved by bolting
through the frame to the opening with approximate size, style and number of
connections to suit the building construction.
SAFETY:
The panel commended the location and design of the hinges, which
incorporated a shear-pin in the bottom hinge, designed to give way on impact
to protect the door structure. This is susceptible to damage from careless
forklift operations and the shear-pin greatly reduces the risks. Replacement of
this part is simple and inexpensive and hinge size can be selected depending
on the size of the door.
A desirable feature of this shear-pin arrangement is that in the event of an
accident the door remains upright on the top hinge, so avoiding injury.
…/2.
-2-
CONSTRUCTION:
The unique roll formed steel door frame, which contains the PVC panels,
provides a very neat solution to industrial door closures. The all-welded frame
and gusset are strong and well finished.
The panel was also impressed with the system of reinforcing the PVC material
wherever high stress points occurred.
Stainless steel hinges and galvanised steel frames are provided for food area
applications.
DURABILITY:
The construction was considered to be virtually maintenance free except for
periodic greasing of the closure mechanism and the cleaning of the PVC
sheeting.
VALUE:
The panel agreed that the prices of M.T.I. Qualos Pty. Ltd., "See-Thru" Doors
were competitive and represented good value for money, satisfying a current
need for this style of industrial door in a very effective manner.
AESTHETICS:
The panel commended the quality of finish and the general appearance of the
door particularly the clean lines with absence of surface fixings.
CONCLUSION:
The assessment panel recommended that the "See-Thru" Flexible Swing
Doors be granted DESIGN COUNCIL SELECTION.
Loading Dock.qxp
C
le
15/02/2006
ly
r
a
t
12:16 PM
he
B
Page 1
t
s
e
LOADING DOCK
SOLUTION
Loading Dock.qxp
15/02/2006
12:17 PM
Page 2
Accept no Compromise . . .
TODDCO DOCKLEVELERS AND DOCK EQUIPMENT
Our Docklevelers are designed and manufactured in
Australia to counter the harsh working environment of
warehouses and cool rooms across the country.
DOCKLEVELERS Hydraulic Docklevelers
Container Docklevelers
DOCKSEALS
Fixed Head Seals
Adjustable Head Seals
Truckshelters
Inflatable Air seals
DOCKBUMPERS
DOCKLIGHTS
DOCK WHEELCHOCKS
• Superior strength in
construction of platform and
base frame
• Full height telescopic toe
guards to eliminate
catching
• Velocity fuse on main
cylinder for safety
• 18mm thick heavy duty lips
for strength and durability
• Return lines on all
cylinders. No mess or oil
loss
• Silent smooth operation
TRETIGHT INFLATABLE DOCK SEALS BY COMMERCIAL AND GENERAL COOLROOMS
Tretight inflatable dock seals are far superior to others. They use a 3-phase blower
giving maximum power rather than a cheaper single phase under powered blower. This
ensures that the seals push hard against the perimeter of the truck. They also have a
wrap around section at the bottom of the vertical seals, to seal this section as well. Side
seals and head seals meet perfectly to fully enclose and seal the truck giving maximum
energy saving. Manufactured from chloroprene rubber, the Tretight inflatable bags have
been designed to minimise tearing and are UV and fade resistant. Many options are
available on request.
Please Note: 3-Phase Fan draws ambient air from outside the canopy, not within
canopy area which is refrigerated air.
Why go to the expense of installing inflatable dock seals if they don't perform, The
Tretight Inflatable door seals do perform.
M.T.I. QUALOS HÖRMANN SECTIONAL DOORS
Double-Skinned Steel Sectional Door with High Thermal Insulation by
M.T.I. Qualos – Hörmann Doors.
Because the M.T.I. Qualos – Hörmann Sectional Doors open vertically,
useful space is not wasted around the opening because the door
sections are parked underneath the ceiling, parallel to the ceiling or
vertically on the wall, depending on the customers requirements.
Each door panel is supplied with a 42mm thick 100% CFC – free
polyurethane rigid foam which gives the door exceptionally good
insulating values.
The state-of-the-art operators and controls we offer are manufactured
and developed in Hörmann factories throughout Germany.
Perfectly matched components, which have been subject to long
duration testing, give you the assurance that your door will perform
with absolute reliability.
Distributed by:
FOR MORE INFORMATION CONTACT:
M.T.I. QUALOS Pty Ltd
Phone: (03) 9450 1900
Toll Free: 1300 135 539
Fax: (03) 9450 1947
Fax: (03) 9458 3217
TODDCO Australia Pty Ltd
Phone: (03) 9720 7104
Fax: (03) 9720 7209
COMMERCIAL & GENERAL COOLROOMS Pty Ltd
Phone: (03) 9587 1830
Fax: (03) 9587 3672
t
s
e
FLEXIBLE
e
h
t
“SEE-THRU”
ly
r
a
e
l
C
SWING DOORS
B
M.T.I. “See-Thru”SWING DOORS
M.T.I. Flexible See-Thru Doors are ideal for all Industrial
and Commercial applications including Factories, Food
Processing Plants, Transport Terminals, Retail Stores,
Supermarkets, Cool Stores, Meat Works, Hospitals etc.
Manufactured in Australia under licence to Sigerist of
Switzerland they offer the most advanced features of any
flexible door on the market today. Constructed from tough
resilient PVC and a drawn steel frame, they have proven
to be the ideal answer for functional style dividers.
See-Thru Doors have the advantage of opening with a
light push of the hand trolley, forklift truck or transport
vehicle and automatically close after entry.
Despite their great flexibility, they keep out draughts and
dust, are noiseless in operation and act as a barrier
between areas of different temperatures. Being completely
clear, they give an unrestricted view of oncoming traffic
and, if required, will remain open in the 90° position.
ADVANCED FEATURES INCORPORATED IN M.T.I. SEE-THRU DOORS
M.T.I. Flexible See -Thru Swing Door Frames are
fully weld construction (No rivets or bolts are
used in the manufacture of frame). Approx. 100
mm overlap of panels and unique free-hanging
method of framing PVC ensures a perfect seal
under all conditions. No buckling, no tearing, no
uneven hanging.
With patented self-closing ball hinges
M.T.I. Flexible See-Thru Doors are
adjustable over a wide range of closing
pressures. The lower frames are
protected against accidental collision
by minimum point of fracture shear pin.
Doors will remain open in 90° position if
required and will close positively under
a light push.
Cross sections illustrate the freehanging method of holding the clear
door panels.
Standard finish of all door frames in zinc
chromate base, hammertone grey enamel.
Optional finish: hot dipped galvanised frames, for
cool rooms, freezer rooms and food preparation
areas. Powder coating is available on request.
Drawn steel profile frame provides
the means of firmly holding extruded
sections which are bonded to PVC
panel vertically and horizontally.
FOR LARGER THAN STANDARD DOOR OPENINGS
For door openings where the height exceeds 3600mm (max. height of
heavy duty doors) a see-thru gravity flap can be installed above the swing
doors to provide a more economical opening. Where the width of the
door opening exceeds 3000 mm a tandem heavy duty type swing door is
required.
Tandem Head section consisting
of Double Head and hinge to
support weight of larger doors.
Warranty:
M.T.I. Flexible “See Thru” Swing Doors are warranted to be free of any defects
in workmanship and materials under normal use in service for a period of twelve
(12) months.
SWING DOOR SELECTION GUIDE
Type
Application
Maximum Size
Medium Duty
Pedestrian and Non-Motorised
3600mm H x 3050mm W
Medium Duty
Pedestrian Traffic Only
2900mm H x 2400mm W
Heavy Duty
Industrial and Fork Lift Truck
3660mm H x 3050mm W
Heavy Duty (Tandem Head)
4200mm H x 3600mm W
Note: Single doors are available in both medium and heavy duty types.
MELBOURNE
55 Northern Road,
West Heidelberg, Vic. 3081
Telephone: (03) 9450 1900
Fax:
(03) 9458 3217
SYDNEY
5 Hallstrom Place,
Wetherill Park, N.S.W. 2164
Telephone: (02) 9756 5577
Fax: (02) 9756 5666
Distributed by:
Door Panels
5mm thick
5mm thick
7mm thick
7mm thick
M.T.I. QUALOS PTY. LTD.
ABN 12 414 244 204
55 Northern Road, WEST HEIDELBERG, VIC. 3081. AUSTRALIA.
P.O. Box 5055, WEST HEIDELBERG M.D.C. VIC. 3081. AUSTRALIA.
Telephone: +61 (03) 9450 1900 Facsimile: +61 (03) 9458 3217
Email: [email protected] Website: www.mtiqualos.com.au
M.T.I. FLEXIBLE “SEE-THRU” SWING DOORS
STRUCTURAL OPENING WIDTH
DAYLIGHT OPENING WIDTH
approximately 120mm overlap
TOP HINGE
CLEAR PVC
CLEAR PVC
SYDNEY OFFICE: 5 Hallstrom Place, Wetherill Park, N.S.W. 2164. Australia. Telephone: (02) 9756 5577 Facsimile: (02) 9756 5666
Postal Address: P.O. Box 7084, Wetherill Park, N.S.W. 2164. Australia.
M.T.I. QUALOS PTY. LTD.
ABN 12 414 244 204
55 Northern Road, WEST HEIDELBERG, VIC. 3081. AUSTRALIA.
P.O. Box 5055, WEST HEIDELBERG M.D.C. VIC. 3081. AUSTRALIA.
Telephone: +61 (03) 9450 1900 Facsimile: +61 (03) 9458 3217
Email: [email protected] Website: www.mtiqualos.com.au
ARCHITECTURAL SPECIFICATIONS OF M.T.I. FLEXIBLE “SEE-THRU” DOORS
SWING DOORS
Supply and install one (1) pair of Flexible “See-Thru” Swing Doors as manufactured by
M.T.I. Qualos Pty. Ltd., 55 Northern Road, West Heidelberg, Victoria, 3081., and
5 Hallstrom Place, Wetherill Park, New South Wales, 2164., to suit existing opening,
or opening provided by builder
mm High x
mm Wide.
(1)
DOORS CONSTRUCTED OF MEDIUM DUTY SEAMLESS DRAWN STEEL
PROFILE FRAMES WITH 5MM THICK CLEAR PVC PANELS WITH 100MM
OVERLAP TO CENTRE.
**** OR ****
(2)
DOORS CONSTRUCTED OF HEAVY DUTY SEAMLESS DRAWN STEEL
PROFILE FRAMES WITH 7MM THICK CLEAR PVC PANELS WITH 100MM
OVERLAP TO CENTRE.
Patented ball hinges, self-closing and fully adjustable with minimum point of fracture
hinges to bottom, (extra centre hinges to doors over 3000mm High x 2800mm Wide)
FINISH
(A)
Standard zinc chromate base, hammertone grey enamel
Optional finish to PVC panels opaque (frosted)
(B)
Coolrooms and Freezers – Hot dipped galvanised frames
(C)
Powder coated frames available upon request
SYDNEY OFFICE: 5 Hallstrom Place, Wetherill Park, N.S.W. 2164. Australia. Telephone: (02) 9756 5577 Facsimile: (02) 9756 5666
Postal Address: P.O. Box 7084, Wetherill Park, N.S.W. 2164. Australia.
NOTE: LOWER HINGE.
Align doors square to opening. Adjust thrust bearing so that it carries the
weight of the door, then lock into place with lock nut.
Plunger (Thrust Bolt)
Prism
“A” 14mm Bolt
“B” Adjusting Worm Screw
Shoulder Screw (Top Bearing)
Rolling Piece
Base Plate
DOOR MOUNTINGS
Full height mounting plate fixing holes are to be pre-drilled to suit
opening. Doors are then to be installed following step (1) on
installation instructions sheet.
PVC
Insert
11mm
Adjustment Nut
PVC Overlap
Cut Outs
HEAVY/MEDIUM DUTY FRAMES.
If door opening is either brick, pressed metal or timber construction,
steel mounting plates 90mm Wide × 8mm Thick (or similar) full height
of door opening with 120mm return to each side must be provided. These
can be supplied by M.T.I. Qualos Pty. Ltd., if required, (refer to this sketch).
If heavy steel frames exist, (minimum thickness of 6mm) mounting plates
are not required.
FOR COOLROOM INSTALLATION.
If solid construction does not exist, a steel sub-frame must be
provided around the door opening before doors can be installed.
Complete Lower Hinge
Wood Wedge
Overlaps