CATALOG 2008

CATALOG
2008
Claude Lachat
Claude Lachat is one of the pioneers in RC model car design.
He is one of the first to make a succesful offroad RC car and has designed many more since then. Several of his designs
have done very well in the off-road competition achieving podium places in European and World Championships. His
name is synonymous for revolutionary techniques and robust design. The engineers at ISHIMA racing and Claude worked
together intensively to set a new standard for the future of off-road racing.
2
LAYDOWN
SUSPENSION
To create a more reactive suspension, the shocks of the RAVE buggies have been angled towards the center of the
chassis. As a result, they are not precompressed by the weight of the car like on a classic suspension system.
Effects of LAYDOWN SUSPENSION
The uncompressed suspension system reacts that much faster to large bumps or small irregularities alike. The car will
feel more ‘in contact’ with the track and allow you to concentrate on steering instead of having to fight to keep it on
track. The increased grip will allow for a higher cornering speed and a more stable driving line. Because the springs are
much less compressed, the damping can also be fine tuned to perfection. This suspension arrangement is much more
compact than any conventional system and yields much more travel while still keeping the center of gravity in an optimal
low position.
3
2008
Line-up
You
are
ready for it ?
page 6-7
As a competition ready off-road 4WD buggy, the EXTREME M10 offers
exceptional value for money. The rigid graphite reinforced chassis is
perfectly balanced and will efficiently transfer the belt-driven power all
the way to the wheels. A front one way bearing for improved steering
is standard as is the specially wound “TERMINATOR” motor, making
this a true EXTREME buggy.
page 8-9
Underneath the sleek lines of the RAVE M1.0S body hides a CNC
machined chassis which holds the robust transmission and control
components. Engineering plastics or quality alloys are used for all parts
to ensure optimal reliability.
4
Pistol grip
2 channel
FM radio
All the Ishima RTR versions come supplied with a
high quality 2-channel Pistol grip FM Radio.
page 10-11
As the next step in the Ishima range, the RAVE M1.0R offers improved
specs for reliability and performance like a lightened chassis and CNC
machined diff gears. Available in kit form or RTR with powerful .25
engine and metal gear servos.
page 12-13
The RAVE M1.0RR offers a revolutionary new suspension system
combined with only the most exotic parts. No optional parts are available
for this thoroughbred.
5
Scale : 1/10TH
Order No : EXB-SOO1.RTR
Dimensions
EXTREME M10
Ready To Run 1/10th scale
Electric buggy
As a competition ready off-road 4WD buggy, the
EXTREME M10 offers exceptional value for money.
The rigid graphite reinforced chassis is perfectly
balanced and will efficiently transfer the belt-driven
power all the way to the wheels. A front one way
bearing for improved steering is standard as is the
specially wound “TERMINATOR” motor, making this
a true EXTREME buggy.
Length
Width
400mm
245mm
Height
Weight
150mm
1400g
Technical
Specifications
Main Chassis
Front shock stay
Rear shock stay
Shocks
Center drive
Rear differentiial
Drive system
Turnbuckles
CVD
Ball bearings
Slipper clutch
Battery
Motor
Steering servo
Speed controller
Radio
Body
Graphite reinforced chassis
Graphite reinforced shock stay
Graphite reinforced shock stay
Aluminium oil filled constant volume
One way bearing
Adjustable ball differential
Belt drive
Steel reversed thread
Front
20
Yes
Saddle pack 1900 mAh NiCad
TERMINATOR custom
3 kg analog servo
Electronic-15 turns
Pistol grip 2 channel FM
Polycarbonate pre-painted & cut
READY TO RUN
BALANCED BATTERY PACK
6
TERMINATOR MOTOR
REAR DIFFERENTIAL COVER
ONE WAY BEARING
EXTREME M10
A competition experience in electric off-road racing shoud not
break the bank. The extreme M10 offers high specs for pilots with
an average budget. When you are looking into competing for the
first time or just want to have some fun, the Extreme M10 is the
car for you.
FRONT VIEW
BACK VIEW
Narrow body with optimized downforce factor
Efficient large travel suspension system
7
Scale : 1/8TH
Order No : RVB-SOO1.RTR
Dimensions
Length
Width
RAVE M1.0S
Ready To Run 1/8th scale
Nitro powered buggy
Underneath the sleek lines of the RAVE M1.0S
body hides a CNC machined chassis which
holds the robust transmission and control
components. Engineering plastics or quality
alloys are used for all parts to ensure optimal
reliability. Supplied ready to run with powerful
.25 engine and radio system.
READY TO RUN
LARGE VOLUME AIRFILTER
8
CNC MACHINED RADIOPLATE
485mm
305mm
Height
Weight
160mm
3400g
Technical
Specifications
Main Chassis
Front shock stay
Rear shock stay
Front suspension arm holder
Rear suspension arm holder
Front toe in plate
Rear toe in plate
Front stiffener
Rear stiffener
Center differential mount
Engine mount
Sway bar holder
Upper suspension pin holder
Radio plate post
Radio plate mount
Radio plate
Center differential plate
Servo saver plate
Hinge pin
Steering plate
Steering servo mount
Wing stay joint
Steering servo saver post
Rear brace holder
CVD drives
Brake disc
Differential planetary gears
Conical pinion gear
Conical bevel gears
Ball bearings
Muffler
Engine
Steering servo
Throttle servo
Radio
Fail safe unit
Body
POWERFUL .25 ENGINE
Stamped alloy chassis 6061 T6
CNC machined alloy 6061 T6
CNC machined alloy 6061 T6
Stamped alloy 6061 T6
Stamped alloy 6061 T6
Plastic
Plastic
Plastic
Plastic
Plastic
2 pcs alloy std
Plastic
Plastic
Plastic
Plastic
CNC machined alloy 6061 T6
CNC machined alloy 6061 T6
CNC machined alloy 6061 T6
Steel with clips
CNC machined alloy 6061 T6
Plastic
Plastic
Steel
Plastic
Front
Steel disc brake / Ferodo brake pads
Casted metal gears
CNC machined steel gears
CNC machined steel gears
Rubber shielded 24 pcs
2 Chamber
.25 GO engine
6 kg analog servo MG
6 kg analog servo
Pistol grip 2 channel FM
None
Polycarbonate pre-painted & cut
LAY DOWN SHOCK SYSTEM
RAVE M1.0S
Designed from the ground up as a competition machine and
featuring a revolutionary suspension system, the RAVE M1.0S
excells in high speed cornering and stability. Take advantage of
years of competition experience and engineering fused into a top
spec car to take your racing to the next level.
FRONT VIEW
BACK VIEW
Low profile laydown suspension system
Laydown rear suspension system for unrivalled
stability and grip
9
Scale : 1/8TH
Order No : RVB-R001.RTR / RVB-R001.K
Dimensions
Length
Width
RAVE M1.0R
PRO VERSION RTR 1/8th scale
Nitro powered buggy
As the next step in the Ishima range, the RAVE
M1.0R offers improved specs for reliability
and performance like a lightened chassis
and CNC machined diff gears. Supplied with
powerful .25 engine, metal gear servos and
high quality radio system.
RAVE M1.0R
PRO VERSION KIT 1/8th scale
Nitro powered buggy
The RAVE M1.0R is also available as a kit
without engine or radio system and with a
clear body. Build it like only you can and
install your preferred components.
READY TO RUN
LAY DOWN SHOCK SYSTEM
10
RACE PROVEN DESIGN
485mm
305mm
Height
Weight
160mm
3400g
Technical
Specifications
RTR PRO VERSION
Main Chassis
Front shock stay
Rear shock stay
Front suspension arm holder
Rear suspension arm holder
Front toe in plate
Rear toe in plate
Front stiffener
Rear stiffener
Center differential mount
Engine mount
Sway bar holder
Upper suspension pin holder
Radio plate post
Radio plate mount
Radio plate
Center differential plate
Servo saver plate
Hinge pin
Steering plate
Steering servo mount
Wing stay joint
Steering servo saver post
Rear brace holder
CVD drives
Brake disc
Differential planetary gears
Conical pinion gear
Conical bevel gears
Ball bearings
Muffler
Engine
Steering servo
Throttle servo
Radio
Fail safe unit
Body
POWERFUL .25 ENGINE
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
Plastic
Plastic
CNC machined 7075 T6
CNC machined 7075 T6
Plastic
2 pcs 7075 T6
Plastic
Plastic
Plastic
Plastic
CNC machined alloy 6061 T6
CNC machined alloy 6061 T6
CNC machined alloy 6061 T6
Steel with clips
CNC machined alloy 6061 T6
Plastic
Alloy
Steel
Plastic
Front / Rear
Ferodo disc / Steel brake pads
CNC machined steel gears
CNC machined steel gears
CNC machined steel gears
Rubber shielded 24 pcs
3 Chamber
.25 GO engine
9 kg analog servo MG
6 kg analog servo
Pistol grip 2 channel FM
Yes (RTR only)
Polycarbonate pre-painted & cut
CNC MACHINED RADIOPLATE
RAVE M1.0R
Start driving now with the RTR RAVE M1.0R or build it yourself from kit, the choice is yours. The M1.0R has the
strategical upgrades where the demanding pilot expects them. Even the RTR version is at a very high level with
the powerful .25 engine with 3 chamber tuned pipe and powerful metal geared servos.
FRONT VIEW
BACK VIEW
CNC machined aluminium parts all round
Narrow body with sleek lines sets a new standard
11
Scale : 1/8TH
Order No : RVB-RR001
Dimensions
RAVE M1.0RR
Competition 1/8th scale
Nitro powered buggy
The RAVE M1.0RR offers a revolutionary
new suspension system combined with only
the most exotic parts. No optional parts are
available for this thoroughbred.
REAaY TO RAce
CNC DIFFERENTIAL GEARS
12
LAY DOWN SHOCK SYSTEM
Length
Width
485mm
305mm
Height
Weight
160mm
3400g
Technical
Specifications
Main Chassis
Front shock stay
Rear shock stay
Front suspension arm holder
Rear suspension arm holder
Front toe in plate
Rear toe in plate
Front stiffener
Rear stiffener
Center differential mount
Engine mount
Sway bar holder
Upper suspension pin holder
Radio plate post
Radio plate mount
Radio plate
Center differential plate
Servo saver plate
Hinge pin
Steering plate
Steering servo mount
Wing stay joint
Steering servo saver post
Rear brace holder
CVD drives
Brake disc
Differential planetary gears
Conical pinion gear
Conical bevel gears
Ball bearings
Muffler
Engine
Steering servo
Throttle servo
Radio
Fail safe unit
Body
LIGHTENEND CNC CHASSIS
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined lightened 7075 T6
CNC machined 7075 T6
CNC machined 7075 T6
CNC machined 7075 T6
CNC machined 7075 T6
CNC machined 7075 T6
Speedy engine mount
CNC machined 7075 T6
CNC machined 7075 T6
Alloy
Alloy
Carbon fibre
Carbon fibre
Carbon fibre
Racing hinge pin w/nuts
CNC machined lightened 7075 T6
CNC machined 7075 T6
Alloy
7075 T6
CNC machined 7075 T6
Front / Center / Rear
Ferodo disc / Steel brake pads
CNC machined steel gears
CNC machined steel gears
CNC machined steel gears
Rubber shielded 24 pcs
No muffler & manifold
No muffler & manifold
None
None
None
None
Polycarbonate clear & cut
CARBON FIBRE RADIOPLATE
NO LIMITS...
Expect to exceed all limits with the RAVE M1.0RR. Only suitable for the most
demanding pilots with the right intentions, this racing machine will leave the
opposition far behind.
FRONT VIEW
BACK VIEW
Low profile laydown suspension systems for ultra
low unsprung weight
Get ready for a brand new racing experience
13
14
15
Visit our website : www.ishimaracing.com
ISHIMA RACING © is a registered trademark of
UNIVERSAL POWER ENTERPRISES LTD
2-6 Granville Road - Albion Plaza, 11/F, Room 1105
TSIMSHATSUI, KOWLOON - HONG KONG
Phone : (852) 2721 0127
Fax : (852) 2721 3711
Email : [email protected]
This catalog is an edition of UNIVERSAL POWER ENTERPRISES LTD, 2-6 Granville Road - Albion Plaza, 11/F, Room 1105, TSIMSHATSUI, KOWLOON - HONG KONG.
This catalog is protected by a copyright and nothing from this edition may be reproduced or used without any prior written authorisation.
Whilst every effort has been made to ensure the accuracy of the information in this catalog, errors do creep in and ISHIMA RACING © can accept no responsability for failures, wrong specifications, accuracy of colours, losses or damages caused.
ISHIMA RACING © is not responsable for product changes or availablity of our products. The products of dangerous nature included in this catalog are submissive to special handling and storage specifications. Please check with your local authorities for existing legislation.