radiotechnika ulotka ZASILANIE_ANG

Transcription

radiotechnika ulotka ZASILANIE_ANG
MILITARY VEHICLE POWER SUPPLY & CONTROL SYSTEMS
ELEKTRIT
Power supply system for the automotive electronics seems to be the last concern of the vehicle designers, although
it proved to deserve far more attention. Considering the presence of power supply as something obvious –mistaken
assumption of many designers – will inevitably affect the project, deteriorating its financial viability and hindering the
performance of the power supply system. Such negligent approach would usually result in underestimation of the capacity of power sources, malfunctioning of the on-board electronics or cross interference of installed devices. Growing number of problems concerning the quality of power supply has forced many manufacturers to redesign their final
products by incorporating specialized supply units governing the power regulation of the device. This solution however
brings about concealed costs to be borne by the vehicle integrator without actual guarantee that, once the overall
system is completed, its units will not fail to function.
We have long been recognized as an experienced and
trustworthy partner to the military vehicle production companies. Based on our extended participation
in automotive electronics production we have developed a proprietary solution – The Complementary
Vehicle Power Supply System ‘ELEKTRIT’”. The system is complementary because it delivers joint devices
that complement each other through the application
of Raychem technology cable harnesses produced by
RM with MIL-DTL-38999 Series 1 and 2 connectors
and the VG95234 connectors that are licensed by
AMPHENOL, being at the same time thoroughly
tested for EMC compliance at each stage of the system development. ELEKTRIT may be successfully applied in both vehicular and caterpillar vehicles ensuring ultimate supply conditions for electronic devices of an utmost
sensitivity. Cooperating with unquestionable leaders of domestic military industry, such as Huta Stalowa Wola and
Wojskowe Zakłady Mechaniczne in Siemianowice Śląskie, we have successfully implemented our system in military vehicles under special purpose programs REGINA (CSV, KRAB) and RAK (vehicular CV).
ZRM POWER SUPPLY
Supplies power to the on board electronics and ensures
battery charging.
The application of energy-efficient technologies (min
90%) and the 100% passive cooling system implementation have become the branded features of our products.
Every single product and component made by Radiotechnika Marketing is thoroughly tested in our own Electromagnetic Compatibility Laboratory at each production
stage, being thus EMC compliant with NO-06-A200
Standard.
Radiotechnika Marketing Sp. z o.o.
ul. Fabryczna 20, Pietrzykowice
55-080 Kąty Wrocławskie, POLAND
tel. +4871 327 07 00, fax +4871 327 08 00
e-mail: [email protected]
www.radiotechnika.com.pl
BRANCHES:
01-368 WARSZAWA, ul. Rzędzińska 3, tel./fax +4822 631 07 00, tel. +4822 631 07 26
80-252 GDAŃSK, ul. Jaśkowa Dolina 15, tel./fax +4858 342 69 72
40-085 KATOWICE, ul. Mickiewicza 29, tel./fax +4832 209 08 55
90-254 ŁÓDŹ, ul. G. Piramowicza 11/13, tel./fax +4842 630 80 59
MILITARY VEHICLE POWER SUPPLY & CONTROL SYSTEMS
MILITARY VEHICLE POWER SUPPLY & CONTROL SYSTEMS
Power Distribution Box (SRM)
DC-DC Converter (PRM)
– distributes power of required parameters
and control signals to separate and grouped
devices. Our our SRM has
been equipped with short
circuit and overload
protection devices.
– serves to supply 12VDC (24VDC) power to
the terminal equipment while providing Galvanic
Isolation of power sources and regulating output voltage. Our converters family may prove
a useful alternative to converters that ceased
to be produced but remain needed for older vehicles and to new projects to ensure functioning of voltage sensitive electronic devices.
Converters without Galvanic Isolation are also available.
Control Box (SK)
– incorporated into power supply
system, the box controls the actuators, such as electric engines,
boosters etc., based on signals received from on-board control system of any producer. Our boxes
have been designed and manufactured as products dedicated to
particular application (vehicle).
EMI filters (FRM)
– our dedicated EMI filters serve to eliminate interference from terminal equipment,
power supply systems and signal installations of the vehicle, in order to prevent vehicle facilities from
malfunctioning.
PRM
FRM
Control Panel (PS)
ZRM
Power Supply Switching Board (TZZ)
– enable connection of external one or threephase source of power. Our TZZ has been equipped
with all required protection systems against overvoltage,
overload, lightening
and others.
SRM
APU
SK
PS
TZZ
– this vehicle-dedicated panel provides control over
automotive power consumers, such as cabin lightening, bilge pumps, ramps, manholes, AC/NBC control units and others). Our panel has been adjusted
not only to practical and technical
needs of a modern user but
also to the growing demand for
ergonomics.
USA
UNA
VEHICULAR
BATTERY
AC/CBRN
ELECTRONIC
BATTERY
Power Supplies (ZRM)
Battery Interface Unit (USA)
Battery Management Unit (UNA)
– serves to protect vehicle’s electronics against sudden voltage drop caused by the start-up of the engine. The application of BIU prevents sensitive
electronic devices from disconnection,
reset or any other unexpected response
to the voltage drop. It also enables battery charging with the vehicle’s alternator or emergency connection of two
batteries.
- controls and measures the parameters of the
battery. UNA is predestined to interact with the
set of two 12V batteries connected in series into
one 24V battery. The unit, mounted as a module
located in the vicinity of the set of batteries,
transfers measured parameters through optically isolated RS422 Interface
Converter to interacting superior device (vehicle power supply unit,
computer).
www.radiotechnika.com.pl
Power Supplies ZRM-01 (4kW) and ZRM-02 (6,5kW)
are characterized by energy-efficient technologies providing minimum efficiency of 90% throughout
the work cycle and the lack of cooling
fans (so-called ‘passive cooling’). The efficiency factor is particularly important
for the vehicle’s heat balance necessary
while designing its air conditioning system. Our Power Supplies convert 10%
of their electric power into maximum
heat and are able to charge the electronics battery set.
www.radiotechnika.com.pl