Jet-Tech TMX

Transcription

Jet-Tech TMX
Jet-Tech TMX
Copyright © 2012 Jet-Tech Motorsport All Rights Reserved
For Stock Moto Honda/Mikuni TMX
Jetting, needle clip position and plug type for Honda 80cc/85cc/125cc using Mikuni TMX carburettors.









Jetting, needle clip position and plug type for the Mikuni carburettor.
Needle Selection includes the full range of 6EJ12-53 to 6EJ12-60 needles.
Idle Jet selection.
Jet-Tech Flow-Bench ©
Save up to 8 different engine/carburettor/exhaust combinations.
Selectable Denso or NGK sparkplug options.
Carb Ice Warning
Context sensitive 'Help' files and Video Tutorials.
FREE Updates and Technical Support.
Weather Station Calibration
The accuracy of the Pressure, Temperature and
Humidity data you enter into your application has a
direct bearing on the accuracy of the end result!
Jet-Tech provides you with a unique copyright feature
that will calibrate your weather station to an absolute
accuracy of 0.299% or better.
The simple calibration process enables the software to
calculate out any tolerance in mass-produced weather
stations.
Jet-Tech TMX
Developed for the Mikuni TMX carburettor
combination used in 80cc/125cc Stock Moto classes.
Jet-Tech TMX provides accurate Jetting, Needle clip
position for the Mikuni TMX carburettor and the
recommended Spark Plug.
Mikuni TMX Carburettors
Up to 8 different configurations/settings can be saved
in the Set-up database. So when you change your
carburettor type, carburettor settings or engine, you
can easily recall your optimum set-up for the chosen
combination thus maintaining maximum performance
with the click of a button.
Carb Ice
JET-TECH TMX continually monitors the Dew Point
Temperature and displays a Carb Ice warning when
atmospheric conditions are such that Carburettor Ice
may form.
This feature is an essential aid for Professional or
Amateur carburettor tuner alike. It adds another
dimension to understanding fully the performance
envelope of the Mikuni carburettor.
Mikuni Carburettor Needles
'Unlocking' from the main screen, enables Needle
Selection from a drop-down list which includes the
full range of 6EJ12-53 to 6EJ12-60 needles. The
user can modify the settings to allow for the different
characteristics of each needle, relative to their
specific engine/carburettor combination.
In addition, the user can select their choice of idle jet
from 10 - 120 from a drop down list.
NGK or Denso plugs can be selected at the click of a
button.
Mikuni Carburettor Needle Design
All Jet-Tech software includes a unique feature to
advise you when the weather conditions, for your
carburettor setup, require a needle setting that is
beyond the physical limitations of your chosen needle.
This enables you to change your carburettor setup to
either bring your chosen needle back into range or you
may elect to change the needle design for one better
suited to the weather conditions and your carburettor
setup.
Mikuni Carburettor Idle Jet
The user can select their choice of idle jet from 35 80 from a drop down list.
NGK or Denso plugs can be selected at the click of a
button.
Jet-Tech Flow-Bench©
Jet-Tech Flow-Bench© is a unique and Copyright
feature of all Jet-Tech software and is designed to
enable the user to perfectly match Carburettor,
Engine, Exhaust and Jet-Tech Software for all
racing conditions and states of engine tune.
Jet-Tech Flow-Bench© is a unique and Copyright
feature of all Jet-Tech software and is designed to
enable the user to perfectly match Carburettor,
Engine, Exhaust and Jet-Tech Software for all
racing conditions and states of engine tune.
Because the Mikuni range of carburettors are a
mass produced item, no two will Flow air and fuel
exactly the same and whilst Jet-Tech TMX will, for
99.9% of carburettors, mirror the performance
exactly, it may be that your engine tuner/builder
has optimised your engine and/or exhaust pipe in
a particular way that requires a different jetting and
needle curve to get the maximum power and
torque out of your carburettor and engine
combination.
If this is the case and/or you want to experiment
with your carburettor set-up and performance
across all air density ranges, then the latest
Copyright features of Flow-Bench© are what you
have been waiting for.
You can now set-up even more accurately how
Jet-Tech TMX operates, the jetting answers it
gives you for all Air Density values and adjust the
rate of change of main jet and needle clip settings
required - bearing in mind of course, that for 99.9%
of users, it will already be operating exactly how
you want it to without any further adjustments
being made.
Jet-Tech Flow Bench together with all the other
unique features of the Jet-Tech Software range
give you the opportunity to increase your
understanding of carburetion and the effects of
different carburettor setups on your engine's
performance, thus enabling you to maximise the
full potential of your engine/exhaust/carburettor
combination.
Help Pages
JET-TECH TMX comes with fully searchable, context
sensitive help files. The help files for each screen are
easily reached by pressing F1 on your computer
keyboard or clicking on the ? in the bottom left of the
screen.
Free technical support is provided together with free
updates to the software so your investment is
protected.
Jet-Tech TMX
Copyright © 2012 Jet-Tech Motorsport All Rights Reserved