to their brochures

Transcription

to their brochures
COLMAC COIL
PRODUCT APPLICATIONS
Gas Compression
Industrial Refrigeration
Petro Chem and Refinery
HVAC
Power Generation
VFD Cooling
+1.800.845.6778 | www.colmaccoil.com | PO Box 571 | Colville WA 99114 | USA
Colmac Coil
Product Applications
Gas Compression
•
•
•
•
•
Hydrocarbon Condensers
Compressed Natural Gas
Precoolers, Intercoolers, and Aftercoolers
Multi-Component Gas Coolers
Supercritical Gas Cooling
Industrial Refrigeration
•
•
•
•
A+ Series Air Coolers
Spiral and IQF Evaporators
Blast Freezers
Baudelot Coolers
Petro Chem and Refinery
•
•
Air Cooled Fluid Coolers
Air Cooled Gas Coolers
HVAC
•
•
•
•
•
Hot Water Coils
Chilled Water Coils
Steam Coils
DX Evaporator Coils
Condenser Coils
Power Generation
•
•
•
Turbine Inlet Air Cooling
OEM and retrofit coolers for generator windings
Heat Exchangers for Combustion Air Preheating
+1.800.845.6778 | www.colmaccoil.com | PO Box 571 | Colville WA 99114 | USA
Industrial Refrigeration
Custom Engineered Solutions from “The Heat Transfer Experts”
www.colmaccoil.com
Industrial Refrigeration
A+ Series™ Air Coolers
Colmac Coil introduces the new A+ Series™ Air Coolers for
industrial refrigeration applications. Compared to previously
available designs, this all new product line offers unsurpassed
levels of: energy efficiency, reliability, worker safety, and food
safety.
Blast Freezing / Chilling
Colmac BF and BFL Blast Freezer evaporator units have
been designed to match the requirements of compact blast
freezing systems. The units are arranged for blowthrough
operation with fans and motors mounted on the air entering
side of the coil. This configuration works well for developing
airflow patterns in the confined spaces typical of blast freezing
applications.
IQF / Spiral Freezer Evaporator Coil
Colmac’s spiral freezer and IQF evaporator coils are custom
designed for any of your freezer applications. Continuous fins
up to 16 rows deep, along with any variable fin spacing, is
available.
Air Cooled Condensers / Fluid Coolers
Air-cooled condensing of refrigerants eliminates water usage,
water treatment, and corrosion issues related to evaporative
condensers and cooling towers. Colmac designs and builds
industrial air-cooled condensers for ammonia, halocarbons,
hydrocarbons, and other refrigerants. Condensing capacities
up to 1500 MBH (450 kW) in a single unit, depending on
operating conditions.
Colmac industrial refrigeration units are designed for industrial and commercial applications with 50 and 60 Hz operation,
English and Metric units of measurement. They can be used with ammonia, halocarbon, glycol/brine, or CO2 refrigerants.
Defrost options include air, hot gas, electric, or water. Colmac equipment is designed and built to comply with the requirements
of one or more of the following safety listings: PED (CE), ASME Sec VIII, Canadian Registration Number, UL508, Canadian
Standards Association
CRN
PO Box 571 | Colville WA 99114 | USA
+1.800.845.6778 | +1.509.684.2595 | www.colmaccoil.com
CSA