FLM-3201 User Guide

Transcription

FLM-3201 User Guide
32” LCD Television
FLM-3201
Operating Manual
20050502
Table of Contents
Important Information..........................................................................................................................................................1
Important Safety Precautions .............................................................................................................................................2
Preparations .......................................................................................................................................................................5
Using the Remote Control........................................................................................................................................5
Batteries for the Remote Control .............................................................................................................................5
Power Connection....................................................................................................................................................5
Antenna Connection ................................................................................................................................................6
Identification of Controls.....................................................................................................................................................7
Main Unit..................................................................................................................................................................7
Remote Control........................................................................................................................................................9
Connections......................................................................................................................................................................11
Cautions Before Connecting ..................................................................................................................................11
Connect a VCR ......................................................................................................................................................11
Connect a Camcorder ............................................................................................................................................12
Connect a DVD player (or Set-Top Box) ................................................................................................................13
Connect a DTV receiver.........................................................................................................................................14
Connect a PC.........................................................................................................................................................15
Connect a VCR for Recording...............................................................................................................................16
Turning the Unit On and Off..............................................................................................................................................17
Turning the Unit On and Off ...................................................................................................................................17
Viewing the Menus and Displays ...........................................................................................................................17
Memorizing the Channels.................................................................................................................................................18
Selecting the Signal Source ...................................................................................................................................18
Storing Channels in Memory Automatically............................................................................................................18
Adding and Erasing Channels................................................................................................................................19
Basic Operations ..............................................................................................................................................................20
Changing Channels................................................................................................................................................20
Adjusting the Volume..............................................................................................................................................20
Selecting Input Source Signal ................................................................................................................................21
Selecting a Menu Language...................................................................................................................................21
Setting Picture ..................................................................................................................................................................22
Customizing the Picture .........................................................................................................................................22
Using the Preset Picture Mode...............................................................................................................................22
Setting System .................................................................................................................................................................23
Setting System In TV Mode .................................................................................................................................23
Adjusting Screen Aspect ........................................................................................................................................23
Reducing Picture Noise..........................................................................................................................................23
VCR mode..............................................................................................................................................................23
Loading Default Values ..........................................................................................................................................23
Setting System In VGA Mode ..............................................................................................................................24
Changing the Position of Image .............................................................................................................................24
Adjusting Clock and Phase ....................................................................................................................................24
Adjusting the Picture Automatically ........................................................................................................................24
Adjusting Screen Aspect ........................................................................................................................................25
Displaying Resolution Information..........................................................................................................................25
Loading Default Values ..........................................................................................................................................25
Table of Contents (continued)
Setting System In YPbPr Mode ...........................................................................................................................26
Adjusting Phase .....................................................................................................................................................26
Adjusting Screen Aspect ........................................................................................................................................26
Reducing Picture Noise..........................................................................................................................................26
Loading Default Values ..........................................................................................................................................26
Setting System In DVI Mode ..................................................................................................................................27
Adjusting Screen Aspect ........................................................................................................................................27
Displaying Resolution Information..........................................................................................................................27
Setting Sound ...................................................................................................................................................................28
Customizing the Sound ..........................................................................................................................................28
Using the Preset Sound Mode ...............................................................................................................................28
Setting SRS effect ..................................................................................................................................................28
Adjusting On-Screen Display............................................................................................................................................29
Adjusting OSD Position..........................................................................................................................................29
Adjusting OSD Transparence.................................................................................................................................29
Zooming OSD Menu...............................................................................................................................................29
Setting OSD Off Time.............................................................................................................................................29
Loading default values ...........................................................................................................................................29
TVPC Operations .............................................................................................................................................................30
Viewing the TVPC ..................................................................................................................................................30
Selecting the Signal Source for the TVPC Frame ..................................................................................................30
Changing Channels for the TVPC Frame...............................................................................................................30
Changing the Position of the TVPC Frame ............................................................................................................31
Adjusting the Size of TVPC Frame.........................................................................................................................31
Viewing Picture-by-Picture .....................................................................................................................................31
Using Hotkeys ..................................................................................................................................................................32
Setting Sleep Timer................................................................................................................................................32
Setting Audio Mode ................................................................................................................................................32
To pause Picture.....................................................................................................................................................32
Viewing Closed Captions..................................................................................................................................................33
Turning Closed Caption On or Off..........................................................................................................................33
Setting Closed Caption...........................................................................................................................................33
Setting CC When Mute...........................................................................................................................................33
Adjusting Child Lock Settings ...........................................................................................................................................34
Child Lock...............................................................................................................................................................34
Turning Child Lock On or Off..................................................................................................................................36
Changing the Password .........................................................................................................................................36
Adjusting the Movie Rating.....................................................................................................................................36
Adjusting the TV Rating..........................................................................................................................................36
Adjusting Canadian English Rating........................................................................................................................37
Adjusting Canadian French Rating.........................................................................................................................37
Troubleshooting ................................................................................................................................................................38
Care and Maintenance .....................................................................................................................................................39
Specification .....................................................................................................................................................................40
Programming the Universal Remote Control ....................................................................................................................42
Important Information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating
instructions unless you are qualified to do so.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical
Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system
of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due
to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance:
www.eia.org
FCC STATEMENT
FCC Notice
LCD TV: A CLASS B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
FCC CAUTION:
Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by the
manufacturer could cause harmful interference and would void the user's authority to operate this device.
WARNING: This is a CLASS B product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures to counter interference.
1
Important Safety Precautions
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions
when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD TV product, please read
the following precautions carefully before using the product.
1. Read these instructions---All operating instructions must be read and understood before the product is operated.
2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.
3. Heed all warnings---All warnings on the product and in the instructions must be observed closely.
4. Follow all instructions---All operating instructions must be followed.
5. Do not use this apparatus near water---for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Do not use immediately after moving from a low temperature to high temperature
environment, as this causes condensation, which may result in fire, electric shock, or
other hazards.
6. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Ventilation---Do not block any ventilation openings. Install in accordance with the
manufacturer instructions. The vents and other openings in the cabinet are designed for
ventilation. Do not cover or block these vents and openings since insufficient ventilation
can cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not place the product in an enclosed
place such as a bookcase or rack, unless proper ventilation is provided or the
manufacturer’s instructions are followed.
8.Heat sources---Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.Grounding or Polarization---Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Power cord protection---Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not recommended by the
manufacturer. Use of improper attachments can result in accidents.
2
Important Safety Precautions (continued)
12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table.
Placing the product on an unstable base can cause the product to fall, resulting inserious personal
injuries as well as damage to the product. When mounting the product on a wall, be sure to follow
the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
13. Move Carefully---When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces
can cause the product to fall from the trolley.
14. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of
time. For added protection for this television equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to the equipment due to lightning and power-line surges.
15. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
16. Replacement parts---In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
17.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other
equipment as this can result in a risk of fire or electric shock.
18.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltage flows in the product,
and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
19.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified
service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those
described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often
requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product
indicates that the product needs servicing.
20.Safety checks---Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the product is in proper operating condition.
21.Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method
recommended by the manufacturer. This is a safety precaution.
3
Important Safety Precautions (continued)
22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a
lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with another power
supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment
and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When connecting other products such
as VCRs and personal computers, you should turn off the power of the unit for protection against electric shock.
23.Panel protection---The LCD panel used in this product is made of glass. Therefore, it can break
when the product is dropped or impacted upon by other objects. Be careful not to be injured by
broken glass pieces in case the LCD panel breaks.
24.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active
pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
<If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
NEC—NATIONAL ELECTRICAL CODE
<An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can collide with such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits, as contact with them might be fatal.
4
Preparations
Using the Remote Control
<Use the remote control by pointing it towards the remote sensor window of the set. Objects between
the remote control and sensor window may prevent proper operation.
Note: This illustration is for reference only. The remote sensor may be in different locations on
different models.
30
Cautions regarding use of remote control
30
5m
<Do not expose the remote control to shock. In addition, do not expose the remote control to liquids,
and do not place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1 Open the battery cover.
2
3
Insert two size-AA batteries.
Replace the cover.
<(Place the batteries with their terminals
corresponding to the (+) and (–) indications in
the battery compartment.)
-
+
+
-
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak
chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause skin irritation. If chemical leakage is
found, wipe with a cloth.
<The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
<If the remote control is not used for an extended period of time, remove the batteries from the remote control.
Power Connection
Household
power outlet
Plug into AC outlet.
AC cord
bottom view
1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note:
<This illustration is for reference only. The AC plug may be different on different models.
<This product should be operated only from the type of power source indicated on the marking label.
<Always unplug the AC cord from power outlet when not using for a long period of time.
5
Preparation (continued)
Antenna Connection
CABLE TV (CATV) CONNECTION
A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75ohm cable to the ANT. Terminal.
Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. For more specific instructions on installing cable
TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is
explained below. Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
RF switch (not supplied)
Two-set
signal
splitter
(not
supplied)
OUT
Cable TV Line
IN
Cable TV converter/
descrambler
(not supplied)
“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler by using the converter’s
channel keys.
Note:
Consult your Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
ANTENNAS
The antenna requirements for good color television reception are more important than those for black & white television reception. For this
reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
1. A 75-ohm system is generally a round cable with F-type connector that can
easily be attached to a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm
terminal through a 300-75-ohm adapter (not supplied).
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.
Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the
TV set.
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
A. Combination
VHF/UHF Antenna
300/75-ohm
adapter
(not supplied)
VHF/UHF
antenna
VHF/UHF
antenna
or
300-ohm
twin-lead
75-ohm
coaxial cable
Antenna cable
B. Separ ate VHF And/or
UHF Antennas
UHF
antenna
VHF
antenna
300-ohm
twin-lead
Combiner
(not supplied)
OUT
300-ohm
twin-lead
IN
75-ohm
coaxial cable
or
6
Identification of Controls
Main Unit
A blue indicator lights when the power is on and a red
indicator lights when in the standby mode.
Remote Sensor
Power Indicator
CH+
CHVOL+
VOLSOURCE
MENU
Channel Up/Down
Volume Up/Down
Select Input Signal
Menu
Power On/Standby
AC power input
Headphone jack
1. POWER
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
2. MENU
Press this button to access the Menu main page.
3. SOURCE
To access signal source select menu.
4. VOL+/Press the VOL+ or VOL- button to directly increase or decrease the sound volume level;
In OSD Menu, press these buttons to adjust the value or setting of each item.
5. CH+/Press these two buttons to directly change the TV channel;
In OSD Menu, press these buttons to choose the OSD items.
Note:
Functions of VOL+/-, CH+/-, MENU, SOURCE and POWER
are also provided to the remote control. This operation manual provides
a description based on operating functions with the remote control.
7
Identification of Controls (continued)
Main Unit
Removing or installing the Back Cover
Press the PUSH button
Press the PUSH button
Pull out the Cover carefully
Pull out the Cover carefully
Cover
Insertion
Remove the Cover
Insertion
Cover
After all connections are made, aim the Insertion tabs toward
the Locating grooves, then carefully push the Cover until it
locks in place with a click.
D-Sub
D-Sub IN
5
AUDIO
AUDIO R
DVI-D
DVI-D IN
AUDIO
Y
Pb
Pr
AUDIO R
1 AV OUT
6
VIDEO
AUDIO R
2 AV2 INPUT
HDTV IN
AUDIO L
7
AV1 INPUT/
3 S-VIDEO
IN
AUDIO L/MONO
VIDEO
AUDIO R
AUDIO L/MONO
VIDEO
AUDIO L
S-VIDEO
4 ANTENNA INPUT
1. AV outputs (Video, Audio L/mono, R)
Connect to the VCR input jacks to record programs.
2. AV2 inputs (Video, Audio L/mono, R)
Receive video/audio signals from external sources such as VCR or DVD player.
3. AV1 inputs (Video, Audio L/mono, R) / S-Video input
Receive video/audio signals from external sources such as VCR or DVD player.
Receive a S-Video signal from external source such as VCR or DVD player.
4. Antenna input
Allows you to connect cable or outdoor antenna.
5. D-sub (VGA) input /Audio in
Connect to the VGA/audio outputs on your PC.
6. DVI input /Audio in
Connect to the DVI/audio outputs on your DTV receiver.
7. HDTV inputs (Y, Pb, Pr, Audio L, R)
Connect to the audio and component output jacks of a DVD player or Set-Top Box.
Note:
The AV output terminals output audio/video signal inputted from Antenna input or AV inputs.
8
Identification of Controls (continued)
Remote Control
1. POWER
Turn the unit on or off
2. 0~9 number buttons
Direct channel select
1
3. ENTER button
Channel enter button
4. INPUT
To access source select menu
2
4
5
3
6
7
8
9
10
11
5. LAST
To quickly jump between current channel and last selected
channel.
6. VOL+/Used to adjust volume.
7. CH+/Used to switch channels.
8. MUTE
Sound mute
9. MENU
To access the Menu main page or exit menu operation
10. Menu navigation button: 5634
In Menu operation, use 5/6 to select menu item;
Use 3/4to adjust selected item;
OK button
To confirm, enter submenu or toggle between the settings of the
selected menu item.
11. EXIT
Used to exit the current menu and return to upper level menu.
Note:
In menu operation, CH+/- and VOL+/- button also can be used to navigate
in menus.
9
Identification of Controls (continued)
Remote Control
12. ASPECT
To select screen aspect ratio
13. DISPLAY
To display channel status or signal information
14. STEREO
To select STEREO, SAP or MONO
15. SRS
To turn on or off the SRS sound effect *
16. PIP
To activate picture-by-picture
17. SIZE
To adjust TVPC frame size
18. CAPTION
To select CCD on/off and CCD channel
19. SLEEP
To set Sleep timer
20. PICTURE MODE
Picture mode select
12
13
18
19
21. SOUND MODE
Sound mode select
14
15
16
20
21
22
23
22. PIP INPUT
To select signal source for TVPC frame
17
23. TV/PC
To activate TVPC function
Note:
The TVPC function means you may view a TV program from a mini window
while the main window is displaying a PC screen.
* The SRS symbo is a trademark of SRS Labs,Inc.
SRS technology is incorporated under license from SRS Labs, Inc.
10
Connections
Cautions Before Connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
Connect a VCR
AUDIO R
AV OUT
AUDIO L
R
VIDEO
AUDIO R
AV1 INPUT/
S-VIDEO IN
Audio
cable
W
AUDIO L/MONO
VIDEO
AUDIO R
AUDIO L/MONO
Video cable
VIDEO
Y
AV2 INPUT
S-VIDEO
S-video
cable
or
ANTENNA INPUT
Y
ANT OUT
S - VIDEO
W
R
AV OUT
VIDEO
L AUDIO R
VCR
AV IN
Y
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
VIDEO
L AUDIO R
Rear of the VCR
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-video terminal if your source supports it.
To play VCR
1. Turn on your LCD TV , press INPUT button on the remote control.
2. Press 5or6 to select Video1(AV1 IN) and press OK to confirm.
3. Turn on your VCR , insert a videotape and press the Play button.
11
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
ANT IN
Connections (continued)
Connect a Camcorder
AUDIO R
AV OUT
AUDIO L
R
VIDEO
AUDIO R
VIDEO
Y
AV1 INPUT/
S-VIDEO IN
AUDIO L/MONO
VIDEO
AUDIO R
AUDIO L/MONO
Audio
cable
W
AV2 INPUT
S-VIDEO
Video
cable
ANTENNA INPUT
Y
Y
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
OUT
W
R
IN
VIDEO
R AUDIO L
How to connect:
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and camcorder.
To playback Camcorder
1. Turn on your LCD TV , press INPUT button on the remote control.
2. Press 5or6 to select Video2 and press OK to confirm.
3. Turn on your camcorder and set it to output mode. (For details, refer to your camcorder
owner's manual.)
4. Insert the tape into the camcorder and press Play button.
Note:
The operations of the camcorder may be different and is dependent on your model.
Please read the owner's manual of your camcorder to confirm operation.
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
12
Connections (continued)
Connect a DVD player (or Set-Top Box)
D-Sub
D-Sub IN
AUDIO
G
B
DVI-D
R
AUDIO
DVI-D IN
Y
Pb
Pr
AUDIO R
Video
cable
HDTV IN
R
W
AUDIO L
Audio
cable
R
W
R
AUDIO
B
G
W
COMPONENT
Pr
L AUDIO R
Pb
AV OUT
R AUDIO L
VIDEO
Y
white (audio L)
R red (audio R, P /Cr ) r
G Green (Y)
S - VIDEO
B Blue (P /C
b )b
Rear of the DVD player
DVD player, Set-top Box
How to connect a DVD Player (or Set-Top Box) using Component Video Connections:
Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD player (or Set-Top Box).
Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the DVD player (or Set-Top Box).
To play DVD or Set-Top Box
1. Turn on your LCD TV , press INPUT button on the remote control.
2. Press 5 or 6 to select YPbPr.
3. Press OK to confirm.
3. Turn on your DVD player (or Set-Top Box) .
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
Note:
The Y, Pb, Pr outputs on your DVD player are sometimes labeled Y, Cb, Cr or Y, U, V. If so, connect the cables to like colors.
13
Connections (continued)
Connect a DTV receiver
D-Sub
D-Sub IN
AUDIO
DVI-D
DVI-D IN
Audio
cable
DVI
cable
AUDIO
Y
Pb
Pr
AUDIO R
HDTV IN
AUDIO L
R
W
DVI
AUDIO
L AUDIO R
COMPONENT
AUDIO
Pb
L AUDIO R
Pr
Y
AN T
Rear of the DTV receiver
How to connect:
1. Connect the cable or antenna to the antenna input jack on the DTV receiver.
2. Connect the DVI cable between the DVI input interface on the unit and DVI output
interface on the DTV receiver .
3. Connect the Audio cable between the AUDIO input jack on the unit and AUDIO
output jacks on the DTV receiver.
To Watch DTV
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
1. Turn on your LCD TV , press INPUT button on the remote control.
2. Press 5 or 6 to select DVI.
3. Press OK to confirm.
4. Turn on your DTV receiver.
14
Connections (continued)
Connect a PC
D-Sub
D-Sub IN
AUDIO
DVI-D
DVI-D IN
AUDIO
Audio
cable
VGA
cable
Y
Pb
Pr
AUDIO R
HDTV IN
AUDIO L
How to connect:
Connect a VGA cable between the VGA jack on the PC and the VGA input jack on the unit.
Connect an Audio cable between the AUDIO output on the PC and AUDIO input jack on the unit.
To Watch the PC screen
1. Turn on your LCD TV , press INPUT button on the remote control.
2. Press 5 or 6 to select VGA.
3. Press OK to confirm.
4. Turn on your PC and check for PC system requirements.
5. Adjust the screen resolution and settings on your computer to the preferred settings.
15
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
Connections (continued)
Connect a VCR for Recording
AUDIO L
R
AUDIO R
AV OUT
VIDEO
AUDIO L/MONO
VIDEO
AUDIO R
AUDIO L/MONO
AV2 INPUT
AV1 INPUT/
S-VIDEO IN
Audio
cable
W
Y
AUDIO R
Video
cable
VIDEO
S-VIDEO
ANTENNA INPUT
Y
Y
W
R
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
ANT OUT
W
R
AV OUT
VIDEO
L AUDIO R
S - VIDEO
ANT IN
AV IN
VIDEO
L AUDIO R
Rear of the VCR
How to connect:
VCR for recording
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
To record program
1. Turn on your LCD TV, select a program you wish to record.
2. Turn on your VCR, insert a videotape for recording.
3. Press the Record button to begin recording.
Note:
The AV output terminals output the audio/video signal from the Antenna input or AV inputs.
16
Turning the Unit On and Off
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power
button on the remote control.
The unit will be turned on and you will be ready to use it's features.
Turning Off
With the power on, press the Power button on the remote control to turn off.
Note:
You can also use the Power
button on the control panel on the main unit.
Viewing the Menus and Displays
Your LCD TV has a simple, easy-to-use menu system that appears on the screen. This system makes it convenient and fast
to use features on the unit. The unit also lets you display the status of many of your LCD TV features.
Viewing the Menus
1
With the power on, press the MENU button on the remote control. The main
menu appears on the screen. The picture menu is selected.
MAIN MENU
Picture
Sound
CH
System
Color
Brightness
Contrast
Sharpness
Tint
OSD
TVPC
Setup
2
Use the 5 or 6 to select menu item. Use 3or4 to adjust value of item. Use OK to confirm, enter submenu or toggle the
settings of the selected menu item.
you can press the MENU button repeatedly to exit the menu operations.
Note:
To clearly introduce the menu operations , this operation manual provides a description based on operation with the remote control.
Displaying Status Information
Press the DISPLAY button on the remote control, the unit will display current status information such as channel number, audio mode or
signal source, etc.
17
Memorizing the Channels
Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the available channels are
memorized, use CH+/- to scan the channels.
Selecting the Signal Source
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is connected to the unit.
(i.e., an antenna or cable system)
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select CH item.
MAIN MENU
Picture
Sound
CH
System
TV/Cable
Channel No
Add/Erase
Auto Search
OSD
TVPC
Setup
3
Press OK to access the submenu.
The TV/Cable menu item will be highlighted automatically.
4
Press OK to toggle between TV or Cable.
If you are connected to an antenna, please select TV. If you connect cable,
please select cable.
MAIN MENU
Picture
Sound
CH
System
TV/Cable
Channel No
Add/Erase
Auto Search
OSD
TVPC
Setup
Cable
Storing Channels in Memory Automatically
MAIN MENU
1
Press MENU to display the menu main page.
2
Press 5 or6 repeatedly to select CH item.
3
Press OK to access the submenu.
4
Press 6 repeatedly to highlight Auto Search item.
5
Press OK to store channels in memory automatically.
The unit will begin memorizing all the available channels. During the process of the Auto
Search, you can press MENU to exit.
Picture
Sound
CH
System
TV/Cable
Channel No
Add/Erase
Auto Search
OSD
TVPC
Setup
Auto Searching
Ch. Num:
8
Menu to exit
18
Memorizing the Channels (continued)
Adding and Erasing Channels
MAIN MENU
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select CH item.
3
Press OK to access the submenu.
4
Press 6 to highlight Channel No item.
5
Press 3or4 to select a channel number you want to add or erase.
OSD
TVPC
Setup
TV/Cable
Channel No
Add/Erase
Auto Search
8
MAIN MENU
You can also use number buttons to select a desired channel number directly.
6
Press 6 to highlight Add/Erase item.
7
Press OK to toggle between Add or Erase.
When the item is set to erase, the selected channel will be erased.
When the item is set to add, the selected channel will be added.
19
Picture
Sound
CH
System
Picture
Sound
CH
System
OSD
TVPC
Setup
TV/Cable
Channel No
Add/Erase
Auto Search
Erase
Basic Operations
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were erased.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons, followed by ENTER button or wait for some seconds, and the unit
automatically goes to the selected channel.
To select a two-digit channel: in TV mode, press the 0-9 number buttons to directly go to the selected channel; while in Cable mode,
press the 0-9 number buttons , followed by ENTER button or wait for a few seconds, and the unit goes to the selected channel.
To select a three-digit channel: press the 0-9 number buttons to input the channel number, then the unit goes to the selected channel.
Note:
When you use the number buttons, you can directly select channels that were erased.
Using the LAST button
Press this button to switch between the current channel and the last viewed channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL + or VOL- to increase or decrease the volume.
Using the Mute
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
1
2
Press the MUTE button and the sound cuts off.
To turn mute off, press the MUTE button again.
20
Basic Operations (continued)
Selecting Input Source Signal
1
Press the INPUT button to access Source Select menu.
2
Press 5or6 to select a desired input source.
3
Press OK to confirm and the unit displays signal from the selected input source.
Source Select
VGA
DVI
RF
Video1
Video2
SVideo
YPbPr
VGA------Select signal from VGA (15-pin D-sub) interface.
DVI -------Select signal from DVI interface.
RF --------Select TV signal.
Video1-------Select signal from AV1 IN terminals.
Video2-------Select signal from AV2 IN terminals.
SVideo-------Select signal from S-video terminal.
YPbPr ------Select signal from YPbPr terminal.
Selecting a Menu Language
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select OSD item.
3
Press OK to access the submenu.
The Language item will be highlighted automatically.
4
Press OK to toggle between English, French and Spanish.
5
Press MENU to exit.
21
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Language
H Position
V Position
Halftone
Zoom
OSD off
Default
English
Setting Picture
Customizing the Picture
1
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
2
3
4
5
Press OK to access the Picture submenu.
MAIN MENU
Picture
Sound
CH
System
Press 5or6 to select the item you wish to change.
Color
Brightness
Contrast
Sharpness
Tint
OSD
TVPC
Setup
Press 3or4 to adjust the value of the item.
Press MENU to exit.
40
In TV/Video mode
Option
Color
Brightness
Contrast
Sharpness
Tint
Function
Range
Operation
4: deeper
3:paler
Adjusts screen brightness for easier viewing of 4: lighter
dark picture such as night scenes and black 3: darker
hair.
Adjusts color saturation.
0~100
0~100
Adjusts image contrast.
4: stronger
3: weaker
0~100
Adjusts image sharpness and displays a
sharp image.
4: sharper
3: softer
0~100
Adjusts tint for image.
4: greenish
3: purplish
0~100
In VGA/DVI mode
Option
Brightness
Function
Range
Operation
Adjusts screen brightness for easier viewing of 4: lighter
dark picture such as night scenes and black 3: darker
hair.
0~100
Adjusts image contrast.
4: stronger
3: weaker
0~100
Sharpness
Adjusts image sharpness and displays a
sharp image.
4: sharper
3: softer
0~100
Color Temp
Adjusts preset color temperature.
Use OK to toggle
6500K
9300K
12000K
Contrast
Using the Preset Picture Mode
Use the PICTURE MODE button to quickly select picture mode.
There are three preset picture modes (Bright, Soft and Nature) and one user-set picture mode
(User). Each preset mode has its own picture settings.
Bright: Select for a bright picture.
Soft: Select for a finely detailed picture.
Nature: Select for a normal picture.
Adjusted settings are stored in User mode.
Bright
22
Setting System
Setting System In TV Mode
Adjusting Screen Aspect
1
2
3
Press MENU to display the menu main page.
4
OSD
Press OK repeatedly to select a desired aspect ratio.
You can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom.
TVPC
16:9
4:3 –– For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size without any
Setup
stretching.
16:9 –– For 16:9 signal format. This mode displays 16:9 aspect ratio picture.
Panorama –– In this mode the picture is progressively stretched toward each side of the screen.
Zoom –– For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and bottom black bars of the
picture.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
The Aspect Ratio item will be highlighted automatically.
MAIN MENU
Picture
Sound
CH
System
Aspect Ratio
N/R
VCR mode
Default
Note:
You may quickly select the screen aspect by using the ASPECT button on the remote control.
Reducing Picture Noise
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
Press 5or6 repeatedly to select N/R item.
Press OK to select Off, Auto, Strong, Middle or Weak.
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps
to enhance the picture quality by reducing the noise.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Aspect Ratio
N/R
VCR mode
Default
Auto
VCR mode
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
Press 5or6 repeatedly to select VCR mode item.
Press OK to select On or Off.
When you are watching VCR program type or receiving weak signal, please set the "VCR
mode" item to "On". It helps to obtain a better synchronization and improve the stability of the
picture.
Loading Default Values
You may quickly load default values by using the Default item.
23
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Aspect Ratio
N/R
VCR mode
Default
On
Setting System (continued)
Setting System In VGA Mode
Changing the Position of Image
The unit allows you to adjust the position of the screen if it is not well-aligned.
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select System item.
3
Press OK to access the submenu.
4
Press 5or6 to select H position or V position item.
5
Press 3or4 to adjust the value of the item until the screen is well-aligned.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
H Position
V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
40
Adjusting Clock and Phase
1
Press MENU to display the menu main page.
2
3
Press 5or6 repeatedly to select System item.
4
Press 5or6 to select Clock or Phase item.
5
Press 3or4 to adjust the value of the item until the screen is well-aligned.
Press OK to access the submenu.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
H Position
V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
40
Adjust the clock frequency of the set's internal clock signal. If shimmering or rainbow-like noise is apparent in
the image, try adjusting the clock frequency setting.
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience blurring ,
you can obtain a clearer image by adjusting the phase setting.
Adjusting the Picture Automatically
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
Press 5or6 repeatedly to select Auto Adjust item.
Press OK to confirm.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
H Position
V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
The unit automatically adjusts phase, clock or position, etc.
The Auto Adjust function only works when the picture is displayed in 16:9 with full screen.
24
Setting System (continued)
Setting System In VGA Mode(continued)
Adjusting Screen Aspect
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select System item.
3
Press OK to access the submenu.
4
Press 5or6 repeatedly to highlight Aspect Ratio item.
5
Press OK repeatedly to select 4:3 or 16:9.
Note:
You may quickly select the screen aspect by using the ASPECT button on the remote control.
Displaying Resolution Information
You may quickly display the resolution information by using the Resolution item.
Loading Default Values
You may quickly load default values by using the Default item.
25
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
H Position
V Position
Clock
Phase
Auto Adjust
Aspect Ratio
Resolution
Default
16:9
Setting System (continued)
Setting System In YPbPr Mode
Adjusting Phase
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select System item.
3
Press OK to access the submenu.
4
The Phase item will be highlighted automatically.
MAIN MENU
Picture
Sound
CH
System
Phase
Aspect Ratio
N/R
Default
OSD
TVPC
Setup
40
Press 3or4 repeatedly to adjust the value.
Adjusting Screen Aspect
1
2
3
Press MENU to display the menu main page.
4
5
Press 5or6 repeatedly to highlight Aspect Ratio item.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
Press OK repeatedly to select a desired aspect ratio.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Phase
Aspect Ratio
N/R
Default
16:9
For 480i or 480P signal format, you can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom.
For 720P or 1080i signal format, you can select the image aspect ratio between 4:3 and16:9.
Note:
You may quickly select the screen aspect by using the ASPECT button on the remote control.
Reducing Picture Noise
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select System item.
Press OK to access the submenu.
Press 5or6 repeatedly to select N/R item.
Press OK repeatedly to select Off, Auto, Strong, Middle or Weak.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Phase
Aspect Ratio
N/R
Default
Auto
Loading Default Values
You may quickly load default values by using the Default item.
26
Setting System (continued)
You must select DVI input source when you do the operations in DVI mode. As regards to the connection , Sound menu and OSD menu of
DVI, refer to page 14 and page 28-29 of this manual. In DVI mode , CH menu displays grey and can't be selected.
Setting System In DVI Mode
Adjusting Screen Aspect
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select System item.
3
Press OK to access the submenu.
4
The Aspect Ratio item will be highlighted automatically.
Press OK repeatedly to select 4:3 or 16:9.
Note:
You may quickly select the screen aspect by using the ASPECT button on the remote control.
Displaying Resolution Information
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select System item.
3
Press OK to access the submenu.
4
Press 6 to select Resolution item.
Now the resolution information will be displayed.
27
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Aspect Ratio
Resolution
16:9
Setting Sound
Customizing the Sound
1
Press MENU to display the menu main page.
2
3
Press 5or6 repeatedly to select Sound item.
4
5
Press 5or6 repeatedly to select the option items you want to adjust.
MAIN MENU
Picture
Sound
CH
System
Press OK to access the submenu.
OSD
TVPC
Setup
Press 3or4 to adjust the value or OK to toggle settings.
Function
Option
Volume
Bass
Treble
Balance
Mute
Speaker
Head Phone
10
Range
Operation
Adjusts volume value.
4: stronger
3: weaker
0~100
Bass
Adjusts Bass (low sounds)
4: stronger
3: weaker
0~100
Treble
Adjusts Treble (high sounds).
4: stronger
3: weaker
0~100
Adjusts volume balance (left and right volumes).
4:Higher volume from right 0~100
speaker.
3:Higher volume from left
speaker.
Mutes the sound
Use OK to toggle
On or Off
Turns on or off speaker sound output
Use OK to toggle
On or Off
Turns on or off headphone sound output
Use OK to toggle
On or Off
Volume
Balance
Mute
Speaker
Head Phone
Using the Preset Sound Mode
Use the SOUND MODE button to quickly select sound mode.
There are three preset sound modes (Movie, Music and News) and one user-set sound mode
(User). Each preset mode has its own sound settings (Bass and Treble ).
Movie: Select for a movie program.
Music: Select for a music program.
News: Select for a speech or conversation program.
Adjusted settings are stored in User mode.
News
Setting SRS effect
Use the SRS button to quickly turn on or off the SRS effect.
SRS (Sound Retrieval System®) is an audio enhancement technology that restores the spatial
cues that are present in a live listening environment and processes it to provide a natural 3D
sound field.
SRS: On
* The SRS symbol is a trademark of SRS Labs,Inc.
SRS technology is incorporated under license from SRS Labs, Inc.
Note:
When the SRS effect is set to On, the SRS function may affect the setting of Balance item.
28
Adjusting On-Screen Display
Adjusting OSD Position
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select OSD item.
Press OK to access the submenu.
Press 5or6 repeatedly to select H Position or V Position item.
Press 3or4 to adjust the OSD position.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Language
H Position
V Position
Halftone
Zoom
OSD off
Default
10
Adjusting OSD Transparency
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select OSD item.
Press OK to access the submenu.
Press 5or6 repeatedly to select Halftone item.
Press 3or4 to adjust the OSD transparence.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Language
H Position
V Position
Halftone
Zoom
OSD off
Default
4
Zooming OSD Menu
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select OSD item.
Press OK to access the submenu.
Press 5or6 repeatedly to select Zoom item.
Press OK repeatedly to select Normal or Zoom.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Language
H Position
V Position
Halftone
Zoom
OSD off
Default
Normal
Note:
When you zoom in the OSD menu, the V position item is unadjustable
Setting OSD Off Time
This setting allows you to set the time that the OSD for the main menu is displayed onscreen.
MAIN MENU
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select OSD item.
Press OK to access the submenu.
Press 5or6 repeatedly to select OSD Off item.
Press OK repeatedly to select a proper time.
You may select between 5 seconds, 10 seconds, 20 seconds, 50 seconds or 200 seconds.
Loading default values
You may quickly load default values by using the Default item.
29
Picture
Sound
CH
System
OSD
TVPC
Setup
Language
H Position
V Position
Halftone
Zoom
OSD off
Default
10 Seconds
TVPC Operations
Viewing the TVPC
The TVPC function is available only when the main frame is in VGA/DVI mode and the aspect ratio is in 16:9 and the
vertical frequency is 60 Hz.
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select TVPC item.
3
Press OK to access the submenu.
The TVPC On/Off item will be highlighted automatically.
4
Press OK to select On or Off.
MAIN MENU
Picture
Sound
CH
System
TVPC On/Off
Source
H Position
V Position
Size
PBP
OSD
TVPC
Setup
On
Note:
4You may quickly open or close TVPC frame by using the TV/PC button directly.
4Audio is from the main picture only.
Main Frame
TVPC Frame
Selecting the Signal Source for the TVPC Frame
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select TVPC item.
3
4
5
Press OK to access the submenu.
Press 5or6 repeatedly to select Source item.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TVPC On/Off
Source
H Position
V Position
Size
PBP
RF
Press OK repeatedly to select signal source for the TVPC frame.
You may select RF, Video1, Video2, SVideo or YPbPr for the TVPC Frame.
Note:
You may quickly select signal source for the TVPC frame by using the PIP INPUT button.
Changing Channels for the TVPC Frame
When the TVPC frame is in TV mode, press the CH+ or CH- button to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were erased.
30
TVPC Operations (continued)
Changing the Position of the TVPC Frame
1
2
3
4
5
Press MENU to display the menu main page.
MAIN MENU
Picture
Sound
CH
System
Press 5or6 repeatedly to select TVPC item.
Press OK to access the submenu.
Press 5or6 repeatedly to select H Position or V Position item.
TVPC On/Off
Source
H Position
V Position
Size
PBP
OSD
TVPC
Setup
Press 3or4to adjust the TVPC frame position.
10
Note:
You can quickly adjust TVPC position by using the 5634 button.
Main frame
TVPC frame
Adjusting the Size of TVPC Frame
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select TVPC item.
3
4
5
Press OK to access the submenu.
Press 5or6 repeatedly to select Size item.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TVPC On/Off
Source
H Position
V Position
Size
PBP
Small
Press OK to adjust the TVPC frame size.
Note:
You may quickly adjust TVPC size by using the SIZE button.
Viewing Picture-by-Picture
You may view double windows by using PIP function.
1
Without TVPC function working, press MENU to display the menu main page.
2
Press 5or6 repeatedly to select TVPC item.
3
4
5
Press OK to access the submenu.
Press 5or6 repeatedly to select PBP item.
Press OK to turn on or off PBP function.
Note:
<You can quickly switch to PBP mode by using the PIP button.
<In PBP mode, the H Position and V Position item do not work if they are adjusted.
31
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TVPC On/Off
Source
H Position
V Position
Size
PBP
On
Using Hotkeys
Setting Sleep Timer
Press the SLEEP button repeatedly to set a sleep time to automatically turn off the unit.
Each press of the button changes the value:
Off
5 minutes
10 minutes
15 minutes
30 minutes
Sleep: 5 min.
Setting Audio Mode
Press the STEREO button repeatedly to select the audio mode between MONO, SAP and
STEREO.
Choose STEREO for channels that are broadcasting in stereo.
Choose MONO for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
Choose SAP to listen to the Second Audio Program, which is usually a foreign-language translation of a program.
To pause the Picture
Press the PAUSE button to hold on the image on the screen (the video sources still run).
Press again to reactivate the image.
Note:
The PAUSE function works in TV, Video or S-video mode only.
For the sake of protecting the screen, please do NOT pause a picture for a long time.
32
Viewing Closed Captions
The unit decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the
hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-recorded
video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the closed
caption symbol in your television schedule and on the tape’s packaging: .
Note:
The Caption feature does not work with YPbPr, VGA,DVI.
Not all the programs and videos will offer closed captioning. Please look for the
symbol to ensure that captions will be shown.
Turning Closed Caption On or Off
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select Setup item.
3
Press OK to access the submenu.
The CCD On/Off item will be highlighted automatically.
4
Press OK to select On or Off.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
CCD On/Off
CCD Mode
CC when mute
Child Lock
On
Setting Closed Caption
1
Press MENU to display the menu main page.
2
Press 5or6 repeatedly to select Setup item.
3
4
5
Press OK to access the submenu.
Press 5or6 repeatedly to select CCD mode item.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
CCD On/Off
CCD Mode
CC when mute
Child Lock
CC-1
Press OK repeatedly to select a desired mode.
You may select between CC-1, CC-2, CC-3, CC-4, T-1, T-2, T-3 and T-4.
The Closed Caption broadcasts can be viewed in two modes: CAPTION and TEXT. For each mode, four channels are available.
The [CAPTION] mode shows subscripts of dialogues and commentaries of TV dramas and news programs while allowing a clear view
of the picture.
The [TEXT] mode displays various information over the picture (such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
Note:
You may quickly select CCD mode by using the CAPTION button directly.
Setting CC When Mute
1
2
3
4
5
Press MENU to display the menu main page.
Press 5or6 repeatedly to select Setup item.
Press OK to access the submenu.
Press 5or6 repeatedly to select CC when mute item.
Press OK to select On or Off.
If you set this item to On, the unit display closed caption when you mute the sound.
33
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
CCD On/Off
CCD Mode
CC when mute
Child Lock
On
Adjusting Child Lock Settings
Child Lock
This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental
Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
[1] Movie Rating (MPAA)
Rating
age
based
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PG-13
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17
NO ONE 17 AND UNDER ADMITTED.
X
X Rating is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
N/A
NOT RATED.
Note:
The Movie rating is only age-based.
Example 1:
“PG-13” in the age-based rating is blocked, this will automatically block the higher ratings “R”, “NC17”, “X” also.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
PG-13
Example 2:
“R” in the age-based rating is blocked, this will automatically block the higher rating “NC-17”, “X”
also.
MAIN MENU
Picture
Sound
CH
System
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
OSD
TVPC
Setup
R
“Child Lock Block” with a green screen will be displayed if you watch the program with Program
Rating data as same as you configured.
Child Lock Block
34
Adjusting Child Lock Settings (continued)
[2] TV Rating
Rating
content based
D
L
V
S
FV
TV-Y (All children)
TV-Y7 (Direct to Older Children)
age TV-G (General Audience)
based
TV-PG (Parental Guidance Suggested)
TV-14 (Parents Strongly Cautioned)
TV-MA (Mature Audience Only)
Content Rating can be set but this Rating is not normally
broadcast by TV Station.
Content Rating can be set.
D: Sexually Suggestive Dialog
L: Adult Language
S: Sexual Situation
V: Violence
FV: Fantasy Violence
Note:
Age-based ratings can be modified by the content-based ratings but only in the combinations indicated by an
Choosing lower age-based rating blocks the higher age-based ratings regardless of content ratings settings.
in the table above.
Example 1:
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings:
TV-G, TV-PG, TV-14 and TV-MA. In addition, D, L, S, V and FV in content are automatically blocked.
MAIN MENU
Picture
Sound
CH
System
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
OSD
TVPC
Setup
TV-Y7
Example 2:
When TV-14 in the age-based rating is set to BLOCK, this will automatically block the higher ratings:
TV-MA.
In addition, if you block “L” sub-rating in TV-PG, then the D, L, S, V and FV in content in
TV-14 and TV-MA will automatically be blocked.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TV-PG:
V
S
L
D
:View
“Child Lock Block” with a green screen will be displayed if you watch the program with Program
Rating data as same as you configured.
Child Lock Block
35
:Block
Adjusting Child Lock Settings (continued)
Turning Child Lock On or Off
1
2
3
4
5
Press the MENU button to display the menu main page.;
Press 5or6 repeatedly to select Setup item;
Press OK to access the submenu;
Enter password with the number buttons.
The default password is 1234, you can change the password by yourself.
The unit allows you to access the Child Lock menu if you input the right password, or
you will be denied.
The Block On/Off item will be highlighted automatically.
Press OK to turn on or off the Child Lock.
Changing the Password
1
From the password menu page, press 5or6 repeatedly to select New Password item.
2
Input a new 4-digit password. For example, you may set "0000" as your new password.
3
Press the MENU button to exit.
Be sure to write down your password and retain it for future use.
The unit provides a master password “8888”. If you forget your password and can’t access Child
Lock menu, you may input the master password to access Child Lock menu. Please set a new
password and make sure to remember your password.
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Picture
Sound
CH
System
OSD
TVPC
Setup
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
0000
[0-9]
MAIN MENU
Adjusting the Movie Rating
1
2
OSD
TVPC
Setup
Press OK repeatedly to select a desired rating you want to block.
On
MAIN MENU
Picture
Sound
CH
System
From the Child Lock menu page, press 5or6 repeatedly to select MPAA item.
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
PG-13
For example, “PG-13” in the age-based rating is selected, this will automatically block the higher
ratings “R”, “NC-17”, “X” also.
3
MAIN MENU
Press the MENU button to exit.
Picture
Sound
CH
System
Adjusting the TV Rating
1
2
From the Child Lock menu page, press 5or6 repeatedly to select TV Rating item.
Press OK repeatedly to select a desired rating you want to block.
This will automatically block the higher age-based ratings. You may set the individual content-based
ratings as follow.
3
4
Press 3or4 if you want to set content-based ratings.
5
Press OK to block ( ) or unblock (
6
Press 5or6 repeatedly to select a desired content rating.
Press MENU repeatedly to exit.
) this rating.
OSD
TVPC
Setup
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
TV-PG
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
TV-PG:
V
S
L
D
:View
:Block
36
Adjusting Child Lock Settings (continued)
Adjusting Canadian English Rating
1
From the Child Lock menu page, press 5or6 repeatedly to select CA EngRateSys item.
2
3
Press OK repeatedly to select a desired rating you want to block.
Press the MENU button to exit.
CANADIAN ENGLISH RATING CHART
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
PG
E
Exempt - Exempt programming includes: news, sports, documentaries and other information programming, talk shows,
music videos, and variety programming.
C
Programming intended for children under age 8. No offensive language, nudity or sexual content.
C8+
Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.
G
General programming, suitable for all audiences.
PG
Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are
strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
18+
Intended for viewers 18 years and older and might contain depictions of violence.
Adjusting Canadian French Rating
1
From the Child Lock menu page, press 5or6 repeatedly to select CA FrnRateSys item.
2
3
Press OK repeatedly to select a desired rating you want to block.
Press the MENU button to exit.
CANADIAN FRENCH RATING CHART
E
G
8 ANS+
13 ANS+
16 ANS+
18 ANS+
37
MAIN MENU
Picture
Sound
CH
System
OSD
TVPC
Setup
Block On/Off
MPAA
TV Rating
CA EngRateSys
CA FrnRateSys
New Password
G
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal
or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains light
or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or
more sufficiently violent scenes to affect them. Adult supervisionstrongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or
intense violence.
Only for adult viewing.Could contain frequent violent scenes and extreme violence.
Troubleshooting
Before calling for repair service, check the following items for possible remedies to the encountered
symptoms.
Symptoms
“Ghost” or double images
Check item
!This may be caused by obstruction to the antenna due to high rise buildings or hills.
Using a highly directional antenna may improve the picture.
No power
!Check that the AC power cord is plugged into the mains socket.
!Unplug the power cord, wait for 60 seconds. Then re-insert
plug into the mains
socket and turn on the unit again.
No picture
!Check antenna connections at the rear of the unit to see if it is properly
connected to the unit.
!Possible broadcast station trouble. Try another channel.
!Adjust the contrast and brightness settings.
!Check the Closed Captions control. Some TEXT modes could block the screen.
!Select a correct input.
!Is a non-compatible signal being input?
Good picture but no sound
!Increase the VOLUME.
!Check that the unit is not muted.
!Check that the Speaker item in SOUND menu is set to ON.
Good sound but poor color
• Adjust the contrast, color and brightness settings.
Poor picture
!Sometimes, poor picture quality occurs when an activated S-VHS camera or
Horizontal dotted line
!This may be caused by electrical interference (e.g. hairdryer, nearby neon lights,
camcorder is connected while another activated peripheral is connected. In this
case, switch off one of the peripherals.
!Check whether the room is too bright.
etc.).
!Turn off the equipment.
Television not responding to
remote control
!Check whether the batteries are working. Replace if necessary.
!Clean the remote control sensor lens on the unit.
!Do not use the remote control under strong or fluorescent lighting.
!The batteries should be inserted with polarity (+, -) aligned.
Snowy picture and noise
!Check the antenna connection.
Unstable or not
synchronized VGA picture
!Check if you have selected the correct VGA mode in your PC.
No output from one
of the speakers
!Adjust Balance in the SOUND menu.
Control buttons do not work.
!Unplug the power cord, wait for 60 seconds. Then re-plug the power cord and turn on
the unit again.
+ Do not use in hot and cold rooms (locations)
• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
(Storage temperature: 0°C to +50°C; Working temperature: 5°C to +40°C )
Note:
If your problem is not solved, turn your unit off and then on again once.
Never attempt to repair a television yourself.
38
Care and Maintenance
LCD Display panel information
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel
deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Note:
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by
Warranty. This product is not designed to display fixed image patterns for extended periods of time.
Cleaning and Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt from the LCD.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth carefully.
39
Specification
Type
Display Size diagonal
Display Feature
LCD panel
Resolution
Pixel Pitch
Maximum Colors
Brightness
Contrast
Viewing Angle
Response Time
TV Tuner & Color System
Tuner
TV System
Channel Coverage
Video Features
Audio Speaker System
Maximum Audio Output
Stereo Sound System
Power Supply
Power Consumption
Stand by Mode Power Consumption
Unit weight (lb)
TV Unit Dimension (WxHxD) (inch)
Other functions
Caption
Security
Remote Control function support for
full OSD features
LCD TV
32”
TFT-LCD
1366 x 768
0.1730 (H)x 0.5190(V) mm
16,700,000
550 nit
800:1
170O/170O
16.6 ms (Gray to gray Typ.)
FST x 1
NTSC
VHF 2-13, UHF 14-69, CATV (1-125)
Progressive Scan
7Wx2
BTSC
AC 100V-240V 50/60Hz
200W
<1W
46
36.9 x 22.15 x 8.66
Sleep Timer (Off only)
Picture Freeze (TV and AV only)
Closed Caption
Child Lock
OSD Support English, French, Spanish
40
Specification (continued)
Terminals
Video In
Video Out
Audio In
Audio Out
Standard Accessories
Optional Accessories
RF : TV/CATV 75ohms coaxial x 1
AV : RCA 75ohms composite video x 2
S-Video : 4-pin DIN x 1
D-Sub 15 x 1
DVI-Dx1
YPbPr (Support HDTV): RCA for DVD, STB x 1
RCA 75 ohms x 1
L/R RCA for AV x 2
Stereo mini phone Jack for PC x 1
Stereo mini phone Jack for DVI-D x 1
L/R RCA for YPbPr x 1
L/R RCA for Video Out x 1
Headphone Jack : Stereo mini phone Jack x 1
1 User Manual
1 Remote Control
1 Power Cord
2 AAA Batteries
1 VGA Cable
1 S-Video Cable
1 Component-Video Cable (YPbPr/YCbCr),
1 Audio/Video Cable
1 Audio Cable (RCA)
1 Audio Cable (RCA to Stereo mini phone Jack)
Display Format Supported by This Unit
For VGA/DVI: 640X480 @ 60Hz,72Hz,75Hz,85Hz;
1024X768 @ 60Hz,75Hz,85Hz;
1280X1024 @ 60Hz.
For YPbPr: 480P @ 60Hz;
720P @ 60Hz;
1080i @ 60Hz.
41
800X600 @ 60Hz,72Hz,75Hz,85Hz;
1280X960 @ 60Hz;
480i @ 60Hz;
Programming the Polaroid Universal Remote Control
Following are two sets of instructions for programming your Polaroid Universal Remote
Control to work with other devices in addition to your Polaroid TV. (If you only wish to use
the remote control with your Polaroid TV, no additional programming is necessary.)
Begin with the Direct Programming Setup, and if unsuccessful, go on to the Auto Code
Search Setup.
Direct Programming Setup
This method requires use of one of the device codes found in the Device Code Table
(see last pages of your Operating Manual). Begin with the first code listed for your device.
1 Turn the device power off and point the Polaroid Universal Remote Control at the device
you wish to control.
2 Momentarily press a device button on the Polaroid Universal Remote Control (TV, DVD,
CBL, or AUX). When you release the device button the red LED at the top of the remote will
blink once.
Note: For devices other than a TV, DVD, or Cable Box, use the AUX key.
3 Press and hold the SET button (top-left button) until you see the LED blink once, followed
by two short blinks. Release the SET button after you see the two short LED blinks.
4 Enter the 5-digit code from the code table for the device you want to control. The LED
blinks once each time you press a numbered button. After you enter the last digit:
a) If the code you entered is the correct code for your device, you will see the LED blink
twice. Go to step 5.
b) If the code you entered is not the correct code for your device, you will see the LED
blink once. Repeat steps 2-4, this time choosing the next code in the list.
5 Press the Power button (top right-side button) on the remote and your device power
should turn on. If the power does not turn on, repeat the entire procedure beginning with
step 1.
If you are unable to program the remote properly after two or more attempts using the Direct
Programming Setup, go on to the Auto Code Search Setup.
42
Auto Code Search Setup
This method does not require use of the Device Code Table.
1 Turn the device power off and point the Polaroid Universal Remote Control at the device
you wish to control.
2 Momentarily press a device button on the Polaroid Remote Control (TV, DVD, CBL, or
AUX). When you release the device button the red LED at the top of the remote will blink
once.
Note: For devices other than a TV, DVD, or Cable Box, use the AUX key.
3 Press and hold the SET button (top-left button) until you see the LED blink once, followed
by two short blinks. Release the SET button after you see the two short LED blinks.
4 Press 9 - 9 - 1 on the number pad. Each time you press the number 9 button the LED
blinks once. When you press the number 1 button, the LED blinks twice.
5 Enter the following number, depending on the device you are trying to control. When you
release the button, you should see two short LED blinks.
Cable or Satellite box – Press 0
TV – Press 1
DVD player – Press 2
Audio device or VCR – Press 3
6 Momentarily press the power button (top-right button) and release it.
7 Press the CH+ button, slowly and repeatedly, until the device you want to control turns on.
Stop pressing immediately when the device power turns on.
Note: If you press the CH+ button too quickly you may save the wrong code, in which case
the remote control will not turn the device power on. Start at step 1 and repeat the
programming steps again.
8 When the device turns on, press and hold the SET button until you see the LED blink
twice. The code is now saved, and the remote should operate properly.
43
Remote Control ID Code List
###### Setup Code For TVs ######
Addison
Admiral
Advent
Aiko
Aiwa
Akai
Albatron
America Action
Anam
Anam National
Anhua
AOC
Apex Digital
Audiovox
10092
10093, 10463
10761, 10842
10092
11914
10812, 10702, 10030, 10672, 11903
10700, 10843
10180
10250, 10180, 10700
10250, 10650
10051
10451, 10093, 10180, 10060, 10030, 10178, 10092
10748, 10765, 10879, 10767, 11943
10451, 10180, 10875, 10092, 10623
Baile
Beijing
Bell & Howell
BenQ
Bradford
Broksonic
10661
10812, 10661
10154
11032
10180
10236, 10463, 11911, 11938, 11905, 11935, 11929
Cailing
Candle
Carnivale
Carver
Celebrity
Celera
Changcheng
Changhong
Ching Tai
Chun Yun
Chung Hsin
Cinema
Citizen
Clarion
Commercial Solutions
Conrowa
Contec
Craig
Crosley
Crown
Curtis Mathes
CXC
10748
10030
10030
10054
10000
10765
10051, 10661
10156, 10765, 11156, 10767
10092
10000, 10180, 10700, 10092, 10843
10180, 10053
10672
10060, 10030, 11928, 10092
10180
11447, 10047
10156, 10145, 11156
10180
10180
10054
10180
10047, 10054, 10154, 10451, 10093, 10060, 10702, 10030, 10145, 10166
10180
Daewoo
10154, 10451, 10180, 10030, 10178, 10672, 11928, 10092, 10661, 11909,
10623, 10700
10661
11080
10145
10017
10463, 10180, 10178, 10171, 11034
Dayu
Dell
Denon
Dumont
Durabrand
Electroband
Emerson
Envision
Ether
10000
10154, 10236, 10463, 10180, 10178, 10171, 11944, 11909, 11929, 11905, 11928,
10623, 11911
10030
10030
Firstar
Fisher
Fortress
Fujitsu
Funai
Furi
Futuretech
10236
10154
10093
10809, 10853
10180, 10171, 11904
10145
10180
Gateway
GE
Gibralter
GoldStar
Grunpy
11756, 11755
11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907,
11922
10017, 10030
10154, 10030, 10178, 11926
10180
Haier
Hallmark
Hankook
Harley Davidson
Harman/Kardon
Harvard
Havermy
Helios
Hello Kitty
Hisense
Hitachi
Hongmei
Huafa
Huari
Huodateji
11034
10178
10180, 10030, 10178
11904
10054
10180
10093
10865
10451
10156, 10748, 10145, 11156
10156, 10030, 10178, 11145, 10145, 10092, 11904, 11156
10093
10145
10145
10051
Imperial Crown
Infinity
Inteq
10661
10054
10017
JBL
JCB
Jean
Jensen
Jiahua
Jinfeng
Jinxing
JVC
10054
10000
10156, 10051, 10236, 10092
10761
10051
10051
10054, 10156, 10145
10053, 11923, 11253
Kangli
KEC
Kenwood
KLH
Kolin
KTV
Kunlun
10661
10180
10030
10765, 10767
10180, 10150, 10053
10180, 10030
10051, 10661
LG
Lloyd's
LXI
10060, 10030, 10178, 10856, 10700, 10025
11904
10047, 10054, 10154, 10156, 10178
Magnasonic
Magnavox
Magnin
Marantz
Matsushita
Maxent
Megapower
Megatron
Memorex
MGA
Midland
Mitsubishi
Monivision
Motorola
MTC
Mudan
Multitech
11928, 11913
11454, 10054, 10030, 10706, 11931, 11254, 11913, 11904, 11944
11907
10054, 10030, 10704
10250, 10650
11755
10700
10178, 10145
10154, 10463, 10150, 10178, 11911, 11926, 11924, 11920, 11927
10150, 10030, 10178, 11907
10047, 10017, 10051
10154, 10250, 10093, 10236, 10180, 11250, 10150, 10030, 10178, 11917, 10836
10843, 10700
10093
10060, 10030
10051
10180
NAD
National
NEC
Newave
Nikko
Norcent
NTC
10156, 10178, 10866
10051
10154, 10156, 10051, 10053, 10030, 10178, 11704
10093, 10178, 10092
10030, 10178, 10092
10748, 10824
10092
Onwa
Optimus
Optonica
Orion
10180
10154, 10250, 10166, 10650, 11927, 11924, 11913
10093
10236, 10463, 11929, 11911, 11905
Panasonic
Panda
Penney
Philco
Philips
Pilot
Pioneer
Portland
Prima
Princeton
Prism
Proscan
Proton
Pulsar
10054, 10250, 10051, 10650, 11941, 11927, 11924
10051, 10706
10047, 10156, 10051, 10060, 10030, 10178, 11926, 11907
10054, 10180, 10030, 10178
11454, 10054, 10000, 10051, 10030, 10178, 10092, 10690
10030
10166, 10866, 10679
10092
10761
10700
10051
11447, 10047, 11922
10030, 10178
10017
Qingdao
Quasar
10051
10250, 10051, 11924, 10650
RadioShack
RCA
10047, 10154, 10180, 10030, 10178, 11920, 11904
11447, 10047, 11454, 10000, 10030, 10178, 11547, 11922, 1917, 10092, 11907,
11948, 10090, 10679
10154, 10180, 10030, 10178
10748
10017, 10030
Realistic
Rowa
Runco
Sampo
Samsung
Sansui
Sanyo
Sanyuan
Scotch
Scott
Sears
Shaofeng
Sharp
Shen Ying
Shencai
Sheng Chia
Skygiant
Skyworth
Sony
Soundesign
Sowa
Squareview
SSS
Starlite
Studio Experience
Supreme
SVA
Sylvania
Symphonic
Synco
10154, 10093, 10030, 10178, 10171, 10700, 10650, 11755, 10092
10154, 10156, 10060, 10812, 10702, 10030, 10178, 11060, 10814, 10092,
11903, 10090, 10766
10463, 11904, 11935, 11929, 11911
10154, 10156, 10180, 10145, 11907
10093
10178
10236, 10180, 10178
10047, 10054, 10154, 10156, 10178, 10171, 11926, 11904
10145
10093, 10030, 10650, 11917
10092
10145
10093, 10236
10180
10748
11100, 10000, 10650, 11925, 11904
10180, 10178
10156, 10051, 10060, 10178, 10092
10171
10180
10180
10843
10000
10748, 10865
10054, 10030, 10171, 11944, 11931
10180, 10171, 11913, 11904
10000, 10451, 10093, 10060, 10178, 10092
Tacico
Tandy
Tashiko
Tatung
Technics
Techwood
Teco
Teknika
Telefunken
Tera
Thomas
Tiane
TMK
TNCi
Tobo
Toshiba
Tuntex
TVS
10178, 10092
10093
10092, 10650
10054, 10154, 10156, 10051, 10060, 11156, 11756, 11254
10250, 10051
10051
10051, 10093, 10178, 10092
10054, 10180, 10150, 10060, 10092
10702
10030
11904
10093
10178
10017
10748
10154, 10156, 10060, 10145, 11945, 11704, 11936, 11156, 11935, 10650, 11918
10030, 10092
10463
V Inc.
Vector Research
Victor
Vidikron
Vidtech
Viewsonic
11756, 10885, 10864
10030
10250, 10053, 10650
10054
10178
11755, 10885, 10864
Wards
Warumaia
Waycon
White Westinghouse
10054, 10030, 10178, 10866, 11156
10661
10156
10463, 11909, 10623
Yamaha
Yapshe
10030
10250
Zenith
10017, 10463, 10178, 11904, 11929, 11911, 11909, 10092
###### Setup Code For VCRs ######
ABS
Admiral
Aiko
Aiwa
Alienware
America Action
American High
Amoisonic
Anam
Anam National
Asha
Audiovox
21972
20048, 20209
20278
20037, 20479
21972
20278
20035
20479
20162, 20037, 20240, 20278
20162
20240
20037, 20278
Beaumark
Bell & Howell
Broksonic
20240
20104
20184, 20121, 20209, 20002, 20479
Calix
Canon
Carver
CCE
Changhong
Citizen
Colt
Craig
Curtis Mathes
Cybernex
CyberPower
20037
20035
20081
20072, 20278
20048, 20081
20037, 20278
20072
20037, 20047, 20240, 20072
20060, 20035, 20162
20240
21972
Daewoo
Dell
Denon
DirecTV
20045, 20104, 20278
21972
20042
20039, 20038
Electrohome
Electrophonic
Emerex
Emerson
20037
20037
20032
20035, 20037, 20184, 20240, 20045, 20121, 20043, 20209, 20002, 20278, 20479
Fisher
Fuji
Fujitsu
20047, 20104
20035, 20033
20045
Gateway
GE
General
Go Video
GoldStar
21972
20060, 20035, 20240
20045
20432
20037, 20209, 20038, 20225
Haojie
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
Hitachi
Howard Computers
HP
Hughes Network Systems
20240
20081, 20038
20072
21972
20047
20037, 20042, 20055
21972
21972
20042, 20739
iBUYPOWER
21972
JVC
KEC
20045, 20067
20037, 20278
Kenwood
KLH
Kodak
Kolin
20067, 20038
20072
20035, 20037
20043
LG
Logik
LXI
20037, 20045, 20042, 20209, 20038
20072
20037
Magnavox
Magnin
Marantz
Marta
Matsushita
Media Center PC
MEI
Memorex
MGA
MGN Technology
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
20035, 20039, 20081
20240
20035, 20081
20037
20035, 20162
21972
20035
20035, 20162, 20037, 20048, 20039, 20047, 20240, 20104, 20209, 20479
20240, 20043
20240
21972
21972
20042
20067, 20043
20035, 20048
20240
20072
NEC
Newave
Nikko
Noblex
Northgate
20035, 20037, 20048, 20104, 20067, 20038
20037
20037
20240
21972
Olympus
Optimus
Orion
20035
21062, 20162, 20037, 20048, 20104, 20432
20184, 20209, 20002, 20479
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Profitronic
Proscan
Protec
Pulsar
21062, 20035, 20162, 20616, 20225
20035, 20037, 20240, 20042, 20038
20042
20035, 20479
20035, 20081, 20739, 20618
20037
20042, 20067
20081
20240
20060
20072
20039
Qisheng
Quasar
20060
20035, 20162
Radix
Randex
RCA
Realistic
ReplayTV
Runco
Sampo
Samsung
Sanky
Sansui
Sanyo
20037
20037
20060, 20035, 20240, 20042, 20880
20035, 20037, 20048, 20047, 20104
20616
20039
20037, 20048
20240, 20045, 20432
20048, 20039
20067, 20209, 20479
20047, 20240, 20104
Scott
Sears
Sharp
Shintom
Shogun
Singer
Sonic Blue
Sony
STS
Sylvania
Systemax
20184, 20045, 20121, 20043
20035, 20037, 20047, 20042, 20104
20048, 20209
20072
20240
20072
20616
20035, 20032, 20033, 20636, 21972
20042
20035, 20081, 20043
21972
Tagar Systems
Tashiko
Tatung
Technics
Teco
Teknika
Tivo
TMK
Toshiba
Totevision
Touch
21972
20037
20045, 20067
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
20636, 20618, 21503, 20739
20240
20045, 20042, 20067, 20043, 21503, 21008, 21972
20037, 20240
21972
Unitech
20240
Vector
Vector Research
Victor
Video Concepts
Videomagic
Videosonic
Viewsonic
20045
20038
20067
20045
20037
20240
21972
Wards
White Westinghouse
20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072
20209, 20072
XR-1000
20035, 20072
Yamaha
20038
Zenith
ZT Group
20039, 20033, 20209, 20479
21972
###### Setup Code For Digital Video Disks ######
Aiwa
Akai
Allegro
Apex Digital
20641, 21912
20770
20869
20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915
Blaupunkt
Blue Parade
Broksonic
20717
20571
20695
Changhong
CineVision
Coby
Curtis Mathes
CyberHome
20627, 21061
20869
21086
21087
21024, 21023, 21129, 20816, 21117
Daewoo
Denon
DVD2000
20833, 21172, 20869
20490
20521
Emerson
Enterprise
20591, 20675
20591
Fisher
Funai
21919
20675
Gateway
GE
Go Video
Greenhill
21158, 21073
20522, 20717
20744, 20833, 21099, 20783, 21075, 20869, 21730
20717
Harman/Kardon
Hitachi
Hiteker
20582, 20702
20573, 20664, 21919
20672
Initial
Integra
20717
20627, 21924
JBL
JVC
20702
20558, 20623, 20867
Kenwood
KLH
Koss
20490, 20534
20717, 21020, 21149
20651, 21980
Lasonic
LG
Liquid Video
Lite-On
Loewe
20798
20591, 20869, 20801
21980
21158, 21058
20511
Magnavox
Marantz
Memorex
Microsoft
Mintek
Mitsubishi
20503, 20539, 21976, 21914, 20675
20539
20695
20522
20717
21521, 20521
Nesa
Norcent
20717
21003
Onkyo
Oritron
20503, 20627, 21924, 20792
20651, 21980
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Portland
Proscan
20490, 21762, 21990
20503, 20539, 20646, 21914
20525, 20571
21086, 21061
20539
20770
20522
Qwestar
20651
RCA
Rio
Rotel
20522, 20571, 20717, 20822
20869
20623
Sampo
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Shinco
Shinsonic
Sonic Blue
Sony
SVA
Sylvania
Symphonic
20752, 20698
20490, 20573, 21932, 21075, 20820
20695
20695
20630, 20752
21117
20770
20717
20533
20869, 21099
20533, 20864, 21033, 21904, 21903
20717
20675
20675
Teac
Technics
Theta Digital
Toshiba
20717, 21984, 20809
20490
20571
20503, 20695
Urban Concepts
20503
Xbox
20522
Yamaha
20490, 20539, 20545
Zenith
20503, 20591, 20869
###### Setup Code For Cable Converters ######
ABC
Americast
00003, 00008, 00014
00899
Bell & Howell
Bell South
00014
00899
Clearmaster
ClearMax
Coolmax
00883
00883
00883
Daeryung
Digi
Director
Dumont
01877, 00877, 00477, 00008
00637
00476
00637
Gehua
General Instrument
GoldStar
00476
00476, 00810, 00276, 00003, 00014
00144
Hamlin
Hitachi
00009, 00273
00014
Jerrold
00476, 00810, 00276, 00003, 00012, 00014
KNC
00008
LG
00144
Memorex
Motorola
MultiVision
00000
00476, 00810, 00276, 01254, 01376
00012
Pace
Panasonic
Panther
Paragon
Philips
Pioneer
Pulsar
01877, 00237
00000, 00008, 00107
00637
00000
00317, 01305
01877, 00877, 00144, 00533
00000
Quasar
00000
RadioShack
Regal
Runco
00883
00279, 00273
00000
Samsung
Scientific Atlanta
Sony
Starcom
Supercable
Supermax
00000, 00144
01877, 00877, 00477, 00008
01006
00003, 00014
00276
00883
Tocom
Torx
Toshiba
Trans PX
Tristar
TS
00012
00003
00000
00276
00883
00003
V2
Viewmaster
Vision
Vortex View
00883
00883
00883
00883
Zenith
00000, 00525, 00899
###### Setup Code For Satellite Receivers ######
AlphaStar
00772
Chaparral
Crossdigital
00216
01109
DirecTV
Dish Network System
Dishpro
00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076,
01109, 00099, 01392, 01640, 01442, 01414, 01108
01005, 00775, 01505
01005, 00775, 01505
Echostar
Expressvu
01005, 00775, 01505
00775
GE
General Instrument
GOI
Goodmans
00566
00869
00775
01246
Hisense
Hitachi
HTS
Hughes Network Systems
01535
00819, 00222, 01250
00775
01142, 00749, 01749, 01442
I-Lo
JVC
LG
01535
00775
01414, 01226
Magnavox
Memorex
Mitsubishi
Motorola
00724, 00722
00724
00749
00869
NEC
Next Level
01270
00869
Panasonic
Paysat
Philips
Proscan
Proton
00247, 00701
00724
01142, 00749, 01749, 00724, 01076, 00722, 00099, 01442
00392, 00566
01535
RadioShack
RCA
00869
00392, 00566, 00855, 00143, 01392
Samsung
Sanyo
SKY
Sony
Star Choice
01276, 01109, 01108
01219
00856
00639, 01640
00869
Tivo
Toshiba
01142, 01442
00749, 01749, 00790, 01285
UltimateTV
Uniden
US Digital
USDTV
01640, 01392
00724, 00722
01535
01535
Voom
00869
Zenith
00856, 01856
###### Setup Code For Audio Amplifiers ######
Bose
GE
JVC
Marantz
Nakamichi
NEC
Optimus
Realistic
Sansui
Shure
Sony
Soundesign
Victor
Wards
Yamaha
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
###### Setup Code For CD Players ######
Aiwa
30157
Burmester
30420
California Audio Labs
Carver
30029
30157, 30179
Denon
DKK
DMX Electronics
Dynamic Bass
30873
30000
30157
30179
Fisher
30179
Garrard
Genexxa
30420
30032
Harman/Kardon
Hitachi
30157, 30173
30032
Integra
30101
JVC
30072
Kenwood
Krell
30826, 30626, 30028, 30037, 30036, 30190
30157
Linn
30157
Magnavox
Marantz
MCS
Miro
30157
30626, 30029, 30157
30029
30000
Mission
MTC
30157
30420
NSM
30157
Onkyo
Optimus
30868, 30101
31063, 30000, 30032, 30037, 30420, 30179, 31075, 30145
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
30029
30420
30626, 30157
31063, 31062, 30032
30157
30157
QED
Quad
Quasar
30157
30157
30029
RadioShack
RCA
Realistic
Rotel
31075
31062, 30032, 30420, 30179, 30053
30420, 30179
30157, 30420
SAE
Sansui
Sanyo
SAST
Sharp
Silsonic
Sonic Frontiers
Sony
Soundesign
30157
30157
30179
30157
30861, 30037
30888, 30036
30157
30490, 30000, 30100
30145
TAG McLaren
Tascam
Teac
Technics
30157
30420
30420
30029
Victor
30072
Wards
30157, 30053
Yamaha
30888, 30036
Zonda
30157
###### Setup Code For Audio Amp/Tuners ######
ADC
Aiwa
Anam
Audiotronic
30531
31405, 31243, 30121
31609, 31074
31189
Bose
31229
Capetronic
Carver
Coby
30531
31189
31263
Denon
31360, 31142, 30904
Fonmix
31360
Glory Horse
31263
Harman/Kardon
Hitachi
30110
31273
Inkel
Integra
30027
30135
JBL
JVC
30110
30074, 31263
Kenwood
KLH
31313, 31570, 30027
31428
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
Onkyo
Optimus
30842, 30135
31023, 30670, 30531, 31074
Panasonic
Philips
Pioneer
Proscan
31518, 30039
31189, 31269
31023, 30150, 30014, 30630, 30531
31254
Qisheng
Quasar
31609
30039
RadioShack
RCA
31263
31023, 31609, 31254, 30531, 31074
Sharper Image
Silsonic
Sony
Soundesign
Stereophonics
Sunfire
31263
30176
31058, 31441, 31258, 31759
30670
31023
31313
Teac
Technics
Thorens
31074, 31267
31308, 31518, 30039
31189
Victor
30074
Wards
30014
Yamaha
30176, 31276, 31176
For service, support and warranty information, visit www.pwwservice.com or call 1-866-396-6322.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the FLM-3201
to Petters Consumer Brands, LLC.
PRINTED IN
RECYCLED PAPER
604-L32K56-00