PORTABLE PUMPS

Transcription

PORTABLE PUMPS
PORTABLE PUMPS
PRODUCT GUIDE 2015
PRODUCT GUIDE 2015
01/2015
|
2
PRODUCT GUIDE 2015
|
COMPANY PROFILE
WATERAX‘s mission is to design, manufacture and supply innovative portable pumps and water-handling
equipment tailored specifically to withstand the rigors of rugged applications and environments. These include
forestry, urban and marine fire control markets, as well as construction, flood control and many others.
Best known for the MARK-3® and the BB-4®, high-pressure, portable, centrifugal pumps, which are benchmarks in
the wildland firefighting community, WATERAX also manufactures a broad range of portable pumps, backpack
pumps, control panels and other related water-handling products.
Key to WATERAX‘s progress has been ongoing feedback and collaboration stemming from its large network of
firefighters, agencies and government clients.
WATERAX pumps are built to last, and many, sold decades ago, are still in operation. The company has thus also
built up a sophisticated parts and service infrastructure to support them. WATERAX products are distributed and
serviced in over 40 countries through a network of dealers, distributors and Original Equipment Manufacturer
(OEM) partners.
Table of contents
Portable Pumps ........................................... page 6
Components ..............................................
page
27
Skid Units....................................................
page
23
Technical Information ............................
page
34
Backpack Pumps ......................................
page
24
Limited Warranty.....................................
page
51
01/2015
PRODUCT GUIDE 2015
|
COMPANY HISTORY
WATERAX has a long and exciting history which traces its roots back to the 1920s,
when Watson Jack & Co. began manufacturing a powerful, 200 PSI portable fire pump
named the Wajax Pump. The Montreal-based company grew and prospered and eventually
acquired a controlling interest in F.H. Hopkins in 1951. B.J. Coghlin Co. Ltd. acquired the
two organizations in 1954 and merged them into a single subsidiary named Watson Jack
Hopkins Ltd., which in 1959, was renamed Wajax Equipment Ltd.
In 1964 Wajax Ltd. acquired Pacific Marine’s fire division and changed its name to
Pacific Pumpers Inc. This move solidified Wajax Ltd.’s position as North America’s leading
forest fire protection products manufacturer. That year, the company also introduced the
MARK-3® brand, which rapidly became the standard wildland portable fire pump used by
forestry agencies around the world.
In the early 80’s Pacific Pumpers changed its name to Wajax-Pacific Fire
Equipment Inc. In the ensuing years the company expanded beyond
its wildland fire-control client base to become an industry-leading
manufacturer of firefighting equipment for the US industrial and marine
markets as well. In 1983, Wajax Ltd. set up its Fire Control Division, which
combined Wajax-Pacific Fire Equipment Inc. and Montreal based Wajax
Manufacturing. Events heated up during the coming years and in 1995,
Wildfire Fire Equipment Inc., a newly formed company, purchased Wajax
Ltd.’s Fire Control Division.
In 2000, Ansul, a division of Tyco International acquired the Wildfire business, but later sold the company to the current
owners in 2010. Since then, the company has invested considerable resources and energy into expanding its product line,
distribution infrastructure and service network.
To accommodate the spike in activity, the head office and manufacturing operation was moved to a new Montreal based
facility in 2013. The following year, the company changed its name to WATERAX Inc., to better reflect the growing uses
of its portable pumps.
Photo: Suzanne Lake fire, Sioux Lookout District, July 1961
01/2015
3
4
PRODUCT GUIDE 2015
|
THE WATERAX WAY
WATERAX is proud to continue its almost century-long tradition of designing, manufacturing and supporting highperformance and durable portable pumps. The key to its success lies in its ability to craft high quality components which
form the cornerstone of superior and dependable pump performance.
Detachable Multi-Stage Pump Ends
WATERAX performance and dependability come from our superior
multi-stage pump end design that provides unrivaled pressure and volume.
• Unique blister resistant mechanical rotary seal to prolong
pump end longevity.
• Maintenance free sealed bearing to avoid the need for greasing the pump end in the field.
• Anodized aluminium impellers and pump body which eliminate galvanic corrosion common with bronze impellers.
Low Maintenance Drive Assembly
Originally designed for the BB-4, the WATERAX low maintenance
drive assembly has been time-tested under the most difficult
conditions and proven to be dependable and reliable for
more than 40 years.
Innovative Quick Release Clamp
WATERAX’s innovative pump end quick release clamp provides
ease of maintenance without having to disassemble the complete
unit, thus significantly reducing equipment downtime, which can
prove crucial in emergency situations.
Convenient 2-in-1 System
WATERAX’s 2-in-1 system enables the easy interchanging
of pump ends in the field. The platform is also compatible with
either a high pressure or a mid-range pump end, providing
users with maximal performance flexibility at the lowest
possible cost.
01/2015
PRODUCT GUIDE 2015
|
THE WATERAX PLATFORM
WATERAX offers of a complete line of high performance pump ends suited to meet the most difficult water handling
requirements. The WATERAX platform is composed of a low maintenance drive assembly, a Mid-Range pump end
and three high pressure pump ends. The platform’s unique feature is its quick release clamp system which allows for the
hook up of any WATERAX pump end to its drive assembly as well as almost instantaneous pump end detachment and
interchange. This reduces equipment downtime, increase its felxibility and significantly cuts costs. These components are
ideal for original equipment manufacturers looking to adapt high quality pump ends to their respective fire apparatus.
High Pressure Pump Ends
The WATERAX High Pressure centrifugal pump ends are
offered in 4-stage, 3-stage, and 2-stage configurations.
They deliver pressure up to 440PSI (30.3 BAR) and flows
reaching 106 GPM (401 L/min) and are ideal pump ends
for moving water over long distance and high elevation.
18-16S / 3-Stage
In addition, all these pump ends have interchangeable
spare parts. This helps keep inventory levels and costs
low while maximizing the utility and versatility of each
stored part. The quality, reliability and durability of these
pump ends are what makes them the most trusted in the
fire industry.
12-16S / 4-Stage
25-16S / 2-Stage
Mid-Range Pump End
The WATERAX B2XTM is a Mid-Range 2-stage centrifugal pump end that delivers pressure
up to 200 PSI (13.8 BAR) and flows reaching 300 US GPM (1136 L/min). A strong show of
pressure and volume it is the ideal pump end for dual attack lines dedicated to wildland &
urban interface operations.
It is also perfect for high volume remote watering, booster line applications, brush trucks,
slip-on units and for uphill tandem operations. The suction and discharge use a combination
of Victaulic and national pipe threads to facilitate its plumbing.
Drive Assembly
WATERAX offers an outstanding drive assembly that boosts the performance of pump
ends. The drive assembly increases the speed of pump revolutions resulting in increased
pressure and volume. The drive assembly is used with the WATERAX quick release clamp
to enable the coupling of the drive assembly to the desired pump end.
01/2015
B2X / 2-Stage
5
6
PRODUCT GUIDE 2015
|
THE WATERAX SERIES
WATERAX offers a complete line of high performance portable centrifugal pumps and backpack hand pumps.
MARK-3
®
SERIES
BB-4
®
SERIES
The MARK-3® is the flagship pump of the WATERAX line. It
is driven by a powerful, yet lightweight, 2-stroke engine and is
ideal when high pressures over long distances are required while
maintaining one person portability.
The BB-4® Series is a full line of high pressure centrifugal pumps that
has been used by forest agencies for over 40 years. It has become the
weapon of choice in wildland operations. The BB-4 pairs a 4-stage
centrifugal pump end with a choice of Briggs & Stratton 18HP and
23HP or Honda 21HP engines.
The BB-4® Diesel is used by forest agencies for Type 6 brush
trucks. The BB-4® Diesel comes in a horizontal pump drive mount
as standard with a vertical drive mount optional. It is powered by
the Kubota D902 Super Mini-Series 3-cylinder liquid cooled diesel
engine.
B2X
TM
SERIES
The B2XTM Series is the new Mid-Range pump platform that delivers
the best performance of its class. A strong show of both pressure
and volume it is idea for dual attack lines operations, high volume
remote water transfer and structural firefighting. The B2XTM pairs a
2-stage centrifugal pump end with a choice of Briggs & Stratton
18HP and 23HP or Honda 21HP engines.
The B2XTM Diesel comes in a horizontal pump drive mount
as standard with a vertical drive mount optional. It is powered
by the Kubota D902 Super Mini-Series 3-cylinder liquid cooled
diesel engine.
01/2015
PRODUCT GUIDE 2015
STRIKER
|
TM
The STRIKERTM series is powered by reliable, fuel-efficient, and
easy-to-use 4-stroke Honda engine paired to a 2-stage or 3-stage
high performance pump end. Applications include cabin protection,
skid units, and snow-making.
®
VERSAX
The VERSAX® is a versatile, rugged, and economical twin impeller
self-priming pump. This unit is driven by a 6HP or 9HP Honda engine.
Its compact design makes it ideal for a variety of applications such
as firefighting, tank filling, water transfers and ATV slip-ons.
MINISTRIKER
The MINI-STRIKER® pump pairs a reliable single stage pump end
with the Honda 4-stroke 2.5 HP engine. Extremely portable and
lightweight, this mini powerhouse performs well when used by
itself or in tandem with other pumps, and is a very popular choice
for entry-level slip-on applications.
SERIES
SERIES
®
SERIES
RANCHER
®
The RANCHER® series is designed for use on ATVs and
other small utility vehicles. Compact and lightweight,
these units enable rapid access to remote areas beyond
the reach of standard skid units.
TM
The BACKPAX™ is a line of backpack pumps conceived with the
comfort and safety of the user in mind. They come with a rigid or
flexible tank and are equipped with an ergonomic pistol grip and
sturdy brass hand pump.
SERIES
BACKPAX
SERIES
01/2015
7
8
PRODUCT GUIDE 2015
MARK-3
®
|
The WATERAX MARK-3® is the flagship pump of the WATERAX line. It is driven
by a powerful, yet lightweight, 2-stroke engine and is ideal when high pressures over long
distances are required while maintaining one person portability.
SERIES
Applications
• Attack line firefighting
• Long hose lay for remote watering during firefighting operations
• High elevation firefighting in mountainous areas
• High pressure provides accuracy in flow trajectory
• Tandem pumping over long distances
• Parallel pumping for higher volumes.
Features and Benefits
• Quick release clamp and detachable pump end for minimal
equipment downtime and inventory
• Unique blister resistant mechanical rotary seal to prolong
pump end longevity
• Sealed bearing to eliminate pump end greasing in the field
• Aluminium alloy pump components and
anodized parts for lighter weight and greater
resistance to corrosion
• Comprehensive user and service manuals
01/2015
PRODUCT GUIDE 2015
|
9
MARK-3®
PORTABLE HIGH PRESSURE FIRE PUMP
The WATERAX MARK-3® is the core of superior water handling systems upon which specifications and standards are built. Pairing a high
performance 4-stage pump end and a 185cc 10 hp 2-stroke engine, this impressive workhorse can achieve pressures of up to 380 PSI (26.2 BAR)
and flow rates reaching 98 US GPM (371 L/Min). It is designed to withstand the rigors and extreme conditions of wildland firefighting and is the
most trusted and time-tested pump in the industry. Appreciated for its ability to maintain high pressure over extraordinary distances and elevation,
it weighs less than 60 lbs (27 kg) and is one-person portable − a critical attribute out in the field.
100 150 200 250 300 350 400 450
PSI 50
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
185cc
MARK-3®
Flow rate at specified pressure
Maximum Pressure: 380 PSI (26.2 bar)
Free flow: 98 US gals/min (371 L/min)
Maximum Head: 878' (268 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
(LPM)
78
(295)
@
100
(6.9)
65
38
(246)
(144)
@
@
150
250
(10.3)
(17.2)
(BAR)
PSI
Engine: 185cc - 10 hp
Portable
MARK-3® PUMP CONFIGURATIONS
Model
Mercury
Fuel Connector
MK3
•
MK3-QS
•
MK3-TQS
•
MK3-D
•
MK3-DTQS
•
SAE Flare 45
Fuel Connector
Metal
Jerry Can
•
Discharge
Thread
Protector
Suction
Thread
Protector
•
•
•
•
Decompression
Switch
•
•
MK3-U
•
MK3-UT
•
01/2015
Air Transport
Fuel Tank
•
•
•
•
10
PRODUCT GUIDE 2015
BB-4
®
|
The WATERAX BB-4® Series is a full line of high pressure centrifugal pumps that has been
used by forest agencies for over 40 years. It has become the weapon of choice in wildland
operations. The BB-4® comes in portable & vehicle mounted configurations and is powered
by Briggs & Stratton Vanguard 18HP and 23HP or Honda 21HP 4-stroke engines to achieve
pressures up to 440 PSI (30.3 BAR) and flow rates reaching 106 US GPM.
SERIES
All BB-4® models feature a unique greaseless sealed bearing and a blister-resistant mechanical
rotary seal. These latest improvements significantly reduce field maintenance and prolong pump
end longevity.
Applications
• Slip-on units
• Attack line firefighting
• Long hose lay for remote watering
during firefighting operations
• High elevation firefighting in
mountainous areas
• High pressure provides accuracy
in flow trajectory
• Tandem pumping over long distances
• Parallel pumping for higher volumes
Features and Benefits
• Quick release clamp and detachable pump end
for minimal equipment downtime and inventory
• Unique blister resistant mechanical rotary seal to prolong pump end longevity
• Sealed bearing to eliminate pump end greasing
in the field
• Drive assembly for reliable, low maintenance
performance
• Aluminium alloy pump components and
anodized parts for lighter weight and greater
resistance to corrosion
• FastwireTM included on all vehicle mounted units.
• Comprehensive user and service manuals
• EPA Certified
BB-4-18
HIGH PRESSURE 4-STAGE FIRE PUMP 18 HP
The WATERAX BB-4-18 pump pairs a reliable high performance 4-stage centrifugal pump end with a powerful Briggs & Stratton
4-stroke 18 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 106 US GPM (401 L/Min).
100 150 200 250 300 350 400 450
Portable
BB-4-18VX
Vehicle mount
vertical drive
PSI 50
BB-4-18P
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
B&S VanguardTM - 18
Flow rate at specified pressure
Maximum Pressure: 440 PSI (30.3 bar)
Free flow: 104 US gals/min (394 L/min)
Maximum Head: 1016' (310 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
(LPM)
100
(379)
80
50
(303)
(189)
PSI
(BAR)
@
150
(10.3)
@
@
250
350
(17.2)
(24.1)
Engine: Briggs & Stratton® VanguardTM - 18 hp
BB-4-18H
Vehicle mount
horizontal drive
01/2015
PRODUCT GUIDE 2015
|
11
BB-4-21
HIGH PRESSURE 4-STAGE FIRE PUMP 21 HP
The WATERAX BB-4-21 pump pairs a reliable high performance 4-stage centrifugal pump end with a powerful Honda
4-stroke 21 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 106 GPM (401 L/Min).
100 150 200 250 300 350 400 450
PSI 50
BB-4-21H
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
Honda GX630
Vehicle mount
horizontal drive
Flow rate at specified pressure
Maximum Pressure: 440 PSI (30.3 bar)
Free flow: 106 US gals/min (401 L/min)
Maximum Head: 1016' (310 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
(LPM)
103
(390)
94
65
(356)
(246)
PSI
(BAR)
@
150
(10.3)
@
@
250
350
(17.2)
(24.1)
Engine: Honda GX630 - 21 hp
BB-4-23
HIGH PRESSURE 4-STAGE FIRE PUMP 23 HP
The WATERAX BB-4-23 pump pairs a reliable high performance 4-stage centrifugal pump end with a powerful Briggs & Stratton
4-stroke 23 HP engine to achieve pressures of up to 440 PSI (30.3 BAR) and flow rates reaching 106 GPM (401 L/Min).
100 150 200 250 300 350 400 450
Portable
BB-4-23VX
Vehicle mount
vertical drive
01/2015
PSI 50
BB-4-23P
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
B&S VanguardTM - 23
Flow rate at specified pressure
Maximum Pressure: 440 PSI (30.3 bar)
Free flow: 106 US gals/min (401 L/min)
Maximum Head: 1016' (310 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
BB-4-23H
Vehicle mount
horizontal drive
US GPM
(LPM)
105
(397)
95
65
(360)
(246)
PSI
(BAR)
@
150
(10.3)
@
@
250
350
(17.2)
(24.1)
Engine: Briggs & Stratton® VanguardTM - 23 hp
12
PRODUCT GUIDE 2015
BB-4
®
DIESEL
|
The WATERAX BB-4-D902 pump pairs a reliable high performance 4-stage centrifugal
pump end with a powerful Kubota D902-E4B 3-Cylinder Fuel Injected Liquid Cooled
25 HP Diesel Engine to achieve pressures of up to 395 PSI (27.2 bar) and flow rates
reaching 106 GPM (401 L/Min). Strong enough to operate as a source pump for tandem
and parallel pumping, it is also optimal for direct attack firefighting, remote watering,
sprinkler systems, and is a popular choice for slip-on units.
The WATERAX quick release clamp provided on the BB-4® pump lets you replace
a damaged pump end in the field with minimal equipment downtime. The 4-stage pump
end on the BB-4® is identical to the pump end on the MARK-3® unit, which greatly
reduces your spare parts inventory and improves your ability to respond to unforeseen
equipment damage.
Applications
• Brush Trucks
• Attack line firefighting
• Long hose lay for remote watering
during firefighting operations
• High elevation firefighting in
mountainous areas
• High pressure provides accuracy
in flow trajectory
• Tandem pumping over long distances
• Parallel pumping for higher volumes
Features and Benefits
• Quick release clamp and detachable pump end
for minimal equipment downtime and inventory
• Sealed bearing to eliminate pump end greasing
in the field
• Belt drive system for reliable, low maintenance
performance
• Aluminium alloy pump components and anodized
parts for lighter weight and greater resistance
to corrosion
• Comprehensive user and service manuals
• EPA Certified
BB-4-D902
HIGH PRESSURE 4-STAGE FIRE PUMP DIESEL
PSI 50 100 150 200 250 300 350 400 450
|
|||||||| |
BAR3.46 .9 10.313.817.220.724.127.63 1
The WATERAX BB-4-D902 pump pairs a reliable high performance 4-stage centrifugal pump end with a powerful Kubota D902-E4B 3-Cylinder Fuel Injected
Liquid Cooled 25 HP Diesel Engine to achieve pressures of up to 450 PSI (31 bar) and flow rates reaching 106 GPM (401 L/Min). Strong enough to operate
as a source pump for tandem and parallel pumping, it is also optimal for direct attack firefighting, remote watering, sprinkler systems, and is a popular choice
for slip-on units.
——— Kubota D902
Flow rate at specified pressure
Maximum Pressure: 395 PSI (27.2 bar)
Free flow: 106 GPM (401 lpm)
Maximum Head: 911’ (278 m)
Flow Rate
US gals/min 20 40 60 80 100 120
|| || |||
L/min
76 151227 303379454
US GPM
(LPM)
106
(401)
103
(390)
65
(246)
Pressure
PSI
(BAR)
@
150
(10.3)
@
250
(17.2)
@
350
(24.1)
Engine: Kubota D902-E4B - 24.8 hp
01/2015
PRODUCT GUIDE 2015
|
13
BB-4-D902V
VEHICLE MOUNT VERTICAL DRIVE
Length 39.8” (101 cm) Width 20.6” (52.32 cm) Height 37” (94.0 cm) Weight 280 lbs (127 kg)
TYP.
BB-4-D902H
VEHICLE MOUNT HORIZONTAL DRIVE
Length 39.8” (101 cm) Width 21.9” (52.32 cm) Height 37” (94.0 cm) Weight 280 lbs (127 kg)
TYP.
01/2015
14
PRODUCT GUIDE 2015
B2X
TM
|
The WATERAX B2XTM Series is a full line of Mid-Range portable pump that delivers the best
performance of its class with minimal operating costs. The WATERAX B2X comes in portable &
vehicle mounted configurations and is powered by Briggs & Stratton Vanguard 18HP and 23HP
or Honda 21HP 4-stroke engines to achieve pressures of up to 200 PSI (13.8 BAR) and flow rates
reaching 300 US GPM (1136 L/Min). A strong show of both pressure and volume makes it the
ideal pump for dual attack lines dedicated to municipal and wildland urban interface operations.
The WATERAX quick release clamp provided on the B2X pump provides ease of maintenance
without having to disassemble the complete pump unit thus significantly reducing equipment
downtime.
SERIES
Applications
Features and Benefits
• Quick release clamp and detachable pump end
for ease of maintenance and minimal equipment
downtime
• Unique blister resistant mechanical rotary seal to prolong pump end longevity
• Sealed bearing to eliminate pump end greasing
in the field
• Drive assembly for reliable, low maintenance
performance.
• Aluminum alloy pump components and anodized
parts for lighter weight and greater resistance to
corrosion
• FastwireTM included on all vehicle mounted units.
• Comprehensive user and service manuals
• EPA Certified
• Vehicle mounted applications
- Brush trucks
- Initial attack units
- Slip-on units
• Booster reel
• Dual 1-1/2” attack lines
• 2-1/2” supply line
• Structure protection
• Water transfer
• Boat fire pump
B2X-18
MID-RANGE 2-STAGE FIRE PUMP 18 HP
17.2
150
10.3
100
6.9
200
B&S VanguardTM - 18
Flow rate at specified pressure
Maximum Pressure: 190 PSI (13.1 bar)
Free flow: 300 US gals/min (1136 L/min)
Maximum Head: 439' (134 m)
13.8
250
The WATERAX B2X-18 pump pairs a reliable high performance Mid-Range 2-stage centrifugal pump end with Briggs & Stratton 4-stroke 18 hp engine
to achieve pressures of up to 190 PSI (13.1 BAR) and flow rates reaching 300 GPM (1136 L/Min).
Pressure
Portable
B2X-18V
Vehicle mount
vertical drive
50
3.4
PSI
B2X-18P
BAR
Flow Rate
US gals/min
50
100
150
200
250
300
350
L/min
190
379
568
757
946
1136
1325
US GPM
(LPM)
255
(965)
155
65
(587)
(246)
PSI
(BAR)
@
50
(3.4)
@
@
100
150
(6.9)
(10.3)
Engine: Briggs & Stratton® VanguardTM - 18 hp
B2X-18H
Vehicle mount
horizontal drive
01/2015
PRODUCT GUIDE 2015
|
15
B2X-21
MID-RANGE 2-STAGE FIRE PUMP 21 HP
17.2
150
10.3
100
6.9
200
Honda GX630
Flow rate at specified pressure
Maximum Pressure: 200 PSI (13.8 bar)
Free flow: 300 US gals/min (1136 L/min)
Maximum Head: 462' (141 m)
13.8
250
The WATERAX B2X-21 pump pairs a reliable high performance Mid-Range 2-stage centrifugal pump end with a powerful Honda 4-stroke 21 hp engine
to achieve pressures of up to 200 PSI (13.8 BAR) and flow rates reaching 300 GPM (1136 L/Min).
Pressure
50
3.4
PSI
B2X-21H
BAR
Flow Rate
Vehicle mount
horizontal drive
US gals/min
50
100
150
200
250
300
350
L/min
190
379
568
757
946
1136
1325
US GPM
(LPM)
275
(1041)
215
112
(814)
(424)
PSI
(BAR)
@
50
(3.4)
@
@
100
150
(6.9)
(10.3)
Engine: Honda GX630 - 21 hp
B2X-23
MID-RANGE 2-STAGE FIRE PUMP 23 HP
17.2
150
10.3
100
6.9
200
B&S VanguardTM - 23
Flow rate at specified pressure
Maximum Pressure: 200 PSI (13.8 bar)
Free flow: 300 US gals/min (1136 L/min)
Maximum Head: 462' (141 m)
13.8
250
The WATERAX B2X-23 pump pairs a reliable high performance Mid-Range 2-stage centrifugal pump end with a powerful Briggs & Stratton 4-stroke 23 hp
engine to achieve pressures of up to 200 PSI (13.8 BAR) and flow rates reaching 300 GPM (1136 L/Min).
Pressure
50
3.4
PSI
BAR
Flow Rate
US gals/min
B2X-23P
L/min
Portable
B2X-23V
Vehicle mount
vertical drive
01/2015
B2X-23H
Vehicle mount
horizontal drive
50
100
150
200
250
300
350
190
379
568
757
946
1136
1325
US GPM
(LPM)
285
(1079)
215
100
(814)
(379)
PSI
(BAR)
@
50
(3.4)
@
@
100
150
(6.9)
(10.3)
Engine: Briggs & Stratton® VanguardTM - 23 hp
16
PRODUCT GUIDE 2015
B2X
TM
DIESEL
|
The WATERAX B2X-D902 pump pairs a reliable high performance Mid-Range 2-stage
centrifugal pump end with a powerful Kubota D902-E4B 3-Cylinder Fuel Injected Liquid
Cooled 25 HP Diesel Engine to achieve pressures of up to : 180 PSI (12.4 bar) and flow
rates reaching 310 GPM (1173 lpm). A strong show of both pressure and volume makes it
the ideal pump for vehicle mounted applications dedicated to municipal and wildland urban
interface operations.
The WATERAX quick release clamp provided on the B2X® pump provides ease of
maintenance without having to disassemble the complete pump unit thus significantly
reducing equipment downtime.
Applications
• Vehicle mounted applications
- Brush trucks
- Initial attack units
- Slip-on units
• Booster reel
• 2x 1-1/2” simultaneous attack lines
• 2-1/2” supply line
• Structure protection
• Water transfer
• Boat fire pump
Features and Benefits
• Versatile fire pump offering the firefighting
capability, high pressure hose reel,
multiple attack lines, and water
transfer capabilities.
• Quick release clamp and detachable
pump end for ease of maintenance
and minimal equipment downtime.
• Belt drive system for reliable,
low maintenance performance.
• Aluminum alloy pump components and
anodized parts for lighter weight and
greater resistance to corrosion
• Comprehensive user and service manuals
• EPA Certified
B2X-D902
MID-RANGE 2-STAGE FIRE PUMP DIESEL
——— Kubota D902-E4B - 24.8
Flow rate at specified pressure
Maximum Pressure: 180 PSI (12.4 bar)
Free flow: 310 GPM (1173 lpm)
Maximum Head: 415’ (127 m)
Flow Rate
PSI |
BAR
50 100 150 200 250
|||| |
190379568757 946
The WATERAX B2X-D902 pump pairs a reliable high performance Mid-Range 2-stage pump end with a powerful Kubota D902-E4B 3-Cylinder Fuel Injected
Liquid Cooled 25 HP Diesel Engine to achieve pressures of up to 220 PSI (15.2 bar) and flow rates reaching 320 GPM (1211 lpm). A strong show of both pressure
and volume makes it the ideal pump for vehicle mounted applications dedicated to municipal and wildland urban interface operations.
US gals/min 50 100 150 200 250 300 350
|
|||||||
L/min
19037956875794611361325
US GPM
(LPM)
274
(1037)
220
(833)
112
0
Pressure
PSI
(BAR)
@
50
(3.4)
@
100
(6.9)
(424)
@
150
(10.3)
(0)
@
180
(12.4)
Engine: Kubota D902-E4B - 24.8 hp
01/2015
PRODUCT GUIDE 2015
|
17
B2X-D902V
VEHICLE MOUNT VERTICAL DRIVE
Length 38.2” (97 cm) Width 20.6” (52.32 cm) Height 37” (94.0 cm) Weight 280 lbs (127 kg)
TYP.
B2X-D902H
VEHICLE MOUNT HORIZONTAL DRIVE
Length 38.2” (97 cm)
Width 22.7” (57.65 cm) Height 37” (94.0 cm) Weight 280 lbs (127 kg)
TYP.
01/2015
18
PRODUCT GUIDE 2015
STRIKER
TM
SERIES
|
The WATERAX STRIKERTM Series is a full line of high pressure pumps powered by Honda
4-stroke engines. This series delivers high pressure ranging from 230 PSI (15.9 BAR) up to 345
PSI (23.8 BAR) and flows water up to 105 US GPM (397 L/Min).
The STRIKERS are ideal pumps for firefighting, water transfer over long distance and high
elevation, sprinkler system supply and snow making.
Applications
• Attack line firefighting
• Long hose lay for remote watering
during firefighting operations
• High elevation firefighting in
mountainous areas
• High pressure provides accuracy
in flow trajectory
• Tandem pumping over long distances
• Parallel pumping for higher volumes
Slip-on units
• Snow Making
Features and Benefits
• Quick release clamp and detachable pump end
for minimal equipment downtime and inventory
• Unique blister resistant mechanical rotary seal to prolong pump end longevity
• Sealed bearing to eliminate pump end greasing
in the field
• Belt drive system for reliable,
low maintenance performance
• Aluminium alloy pump components and
anodized parts for lighter weight and greater
resistance to corrosion
• FastwireTM included on all vehicle mounted units*.
• Comprehensive user and service manuals
• EPA Certified
* Not available on the Mini-Striker
STRIKER SERIES - CROSS REFERENCES
No.
Old Models
New Models
100045
STRIKER-II SLIP-S
STR2-13V
100046
STRIKER-II PLUS-S
STR2-13P
100047
ULTRA-SLIP-S
STR3-13V
100048
ULTRA-SNOW-S
STR3-13S
100049
ULTRASTRIKER-S
STR3-13P
01/2015
01/2015
PRODUCT GUIDE 2015
|
19
STRIKER-3
HIGH PRESSURE 3-STAGE FIRE PUMP
The WATERAX STRIKER-3 also known as ULTRASTRIKER® pump, pairs a reliable 3-stage centrifugal pump end with the Honda
4-stroke 13 HP engine to achieve pressures of up to 345 PSI (23.8 BAR) and flow rates reaching 102 GPM (386 L/Min). It can be
used by itself, in tandem or in parallel with other WATERAX pumps, and is also a very popular choice for snow making and slip-on
applications.
100 150 200 250 300 350 400 450
PSI 50
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
Honda GX390
ULTRASTRIKER
STR3 -13P
Flow rate at specified pressure
Maximum Pressure: 345 PSI (23.8 bar)
Free flow: 102 US gals/min (386 L/min)
Maximum Head: 797' (243 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
( LPM )
87
( 329 )
@
100
( 6.9 )
75
40
( 284 )
( 151 )
@
@
150
250
( 10.3 )
( 17.2 )
( BAR )
PSI
Engine: Honda GX390 - 13 hp
Portable
ULTRASNOW
STR3 -13S
STR3 -13V
Vehicle mount
Portable
STRIKER-2
HIGH PRESSURE 2-STAGE FIRE PUMP
The WATERAX STRIKER-2 also known as STRIKER-II Plus® pump, pairs a reliable 2-stage centrifugal pump end with the Honda
4-stroke 13 HP engine to achieve pressures of up to 230 PSI (15.9 BAR) and flow rates reaching 105 GPM (397 L/Min). It can be used
by itself, in tandem or in parallel with other WATERAX pumps, and is also a very popular choice for slip-on applications.
100 150 200 250 300 350 400 450
PSI 50
STRIKER-II Plus
STR2-13P
Portable
STR2-13V
Vehicle mount
01/2015
BAR 3.4 6.9 10.3 13.8 17.2 20.7 24.1 27.6 31
Honda GX390
Flow rate at specified pressure
Maximum Pressure: 230 PSI (15.9 bar)
Free flow: 105 US gals/min (397 L/min)
Maximum Head: 531' (162 m)
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
( LPM )
97
( 367 )
@
100
( 6.9 )
80
58
( 299 )
( 220 )
@
@
150
200
( 10.3 )
( 13.8 )
Engine: Honda GX390 - 13 hp
PSI
( BAR )
20
PRODUCT GUIDE 2015
VERSAX
®
SERIES
|
The WATERAX VERSAX® Series is a line of versatile, rugged, and economical twin impeller
self-priming pump. This unit is driven by a 6 HP Honda engine. It produces a maximum pressure
of 120 PSI (8.3 BAR) and flow rate of 105 US GPM (397 L/min).
This workhorse can be used as a portable pump or on a slip-on unit. Their compact design makes
them ideal for a variety of applications such as firefighting, tank filling, water transfers and ATV
slip-ons. It is the most affordable series of the WATERAX line.
Applications
Features and Benefits
• Twin impeller design provides additional pressure
for longer & higher pumping applications
• Pump casing and diffusers manufactured from quality
corrosion resistant grade aluminum for long life
• Nylon glass fiber reinforced impellers are fully corrosion
proof and lightweight
• 3-way discharge port for easy installation
• Powder coated casing for added corrosion resistance
• Self-priming for more versatile installation options
• Easy access to drain port
• Low oil protection
• FastwireTM included on all vehicle mounted units.
• Comprehensive user and service manuals
• EPA Certified
•Firefighting
• Tank filling
• High head general
water transfer
• Boom spraying
• Irrigation
• ATV slip-ons
VERSAX-6
SELF-PRIMING 2-STAGE FIRE PUMP 6 HP
The WATERAX VERSAX-6 is a versatile, rugged, and economical twin impeller self-priming portable pump. This unit is
driven by a 6 HP Honda engine. It produces a maximum pressure of 120 PSI (8.3 BAR) and flow rate of 105 US GPM (397 L/min).
The VS2-6P comes equipped with an ergonomic carry handle.
9.7
140
120
80
5.5
60
4.1
20
1.8
PSI
BAR
40
6.9
Maximum Pressure: 120 PSI (8.3 bar)
Free flow: 105 US gals/min (397 L/min)
Maximum Head: 277' (84 m)
2.8
100
Flow rate at specified pressure
8.3
Honda GX200
Pressure
Flow Rate
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
US GPM
(LPM)
83
(314)
63
38
(238)
(144)
PSI
(BAR)
@
50
(3.4)
@
@
75
100
(5.2)
(6.9)
Honda GX200 - 6 hp
VS2-6P
Portable
Also available
VS2-6V Vehicle Mount
01/2015
PRODUCT GUIDE 2015
|
21
VERSAX-9P
SELF-PRIMING 2-STAGE FIRE PUMP 9 HP
The WATERAX VERSAX-9P is a versatile, rugged, and economical twin impeller self-priming portable pump. This unit is driven by
a 9 HP Honda engine. It produces a maximum pressure of 150 PSI (10.3 BAR) and flow rate of 105 US GPM (397 L/min).
It comes equipped with an ergonomic carry handle.
11
160
140
100
6.9
80
5.5
40
20
1.8
PSI
BAR
VS2-9P
Portable
Pressure
Flow Rate
2.8
60
8.3
Maximum Pressure: 150 PSI (10.3 bar)
Free flow: 105 US gals/min (397 L/min)
Maximum Head: 347' (106 m)
4.1
120
Flow rate at specified pressure
9.7
Honda GX270
US GPM
(LPM)
92
(348)
80
64
(303)
(242)
PSI
(BAR)
@
50
(3.4)
@
@
75
100
(5.2)
(6.9)
Honda GX270 - 9 hp
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
VERSAX-9EV
SELF-PRIMING 2-STAGE FIRE PUMP 9 HP ELECTRIC
The WATERAX VERSAX-9EV is a versatile, rugged, and economical twin impeller self-priming vehicle mounted pump. This unit is
driven by a 9 HP Honda engine. It produces a maximum pressure of 150 PSI (10.3 BAR) and flow rate of 105 US GPM (397 L/min). It
is ideal for vehicle mounted applications and is equipped with starter motor for electric start.
11
160
100
6.9
80
5.5
60
8.3
140
01/2015
20
1.8
PSI
Pressure
Flow Rate
2.8
4.1
120
Vehicle mount
Maximum Pressure: 150 PSI (10.3 bar)
Free flow: 105 US gals/min (397 L/min)
Maximum Head: 347' (106 m)
BAR
40
VS2-9EV
Flow rate at specified pressure
9.7
Honda GX270
US GPM
(LPM)
92
(348)
80
64
(303)
(242)
Honda GX270 - 9 hp
US gals/min
20
40
60
80
100
120
L/min
76
151
227
303
379
454
PSI
(BAR)
@
50
(3.4)
@
@
75
100
(5.2)
(6.9)
22
PRODUCT GUIDE 2015
|
MINI-STRIKER
®
SERIES
The WATERAX MINI-STRIKER® pump pairs a reliable single stage pump end with the Honda
4-stroke 2.5 HP engine. Extremely portable and lightweight this mini powerhouse performs well
when used by itself or in tandem with other pumps, and is a very popular choice for entry level
skid applications.
Applications
Features and Benefits
• Attack line firefighting
• Sprinkler operations
• Lightweight aluminium alloy pump
components
• Tandem pumping over long distances
• Portable and compact
• Entry level slip-on units
• Comprehensive user and service manuals
MINI-STRIKER®
LIGHTWEIGHT HIGH PRESSURE FIRE PUMP
90
6.2
80
Honda GXH50
Flow rate at specified pressure
Maximum Pressure: 85 PSI (5.9 bar)
Free flow: 80 US gals/min (303 L/min)
Maximum Head: 196' (60 m)
50
3.4
40
30
20
1.4
BAR .69
PSI 10
Pressure
Flow Rate
2.6
2.8
60
4.1
70
4.8
5.5
The WATERAX MINI-STRIKER® pump pairs a reliable single stage centrifugal pump end with the Honda 4-stroke 2.5 HP engine to achieve pressures
of up to 85 PSI (5.9 BAR) and offers volume supply of up to 68 GPM (257 L/Min). Extremely portable and lightweight – under 20 pounds – this tiny
powerhouse performs well when used by itself or in tandem with other pumps, and is a very popular choice for entry level slip-on applications.
US gals/min
10
20
30
40
50
60
70
80
90
L/min
38
76
114
151
189
227
265
303
341
US GPM
(LPM)
68
(257)
42
12
(159)
(45)
PSI
(BAR)
@
25
(1.7)
@
@
50
75
(3.4)
(5.2)
Engine: Honda GXH50 - 2.5 hp
MSTR-P
Portable
Also available
MSTR-V Vehicle Mount
01/2015
PRODUCT GUIDE 2015
RANCHER
®
SERIES
|
The WATERAX RANCHER® series is designed for use on ATVs and other small
utility vehicles. Compact and lightweight, these units can rapidly access remote
areas beyond the reach of standard skid units. A RANCHER® can be used for a variety
of water handling applications such as park and spot fire patrol, prescribed
burns, mop-up operations, and general farm and rural community work. It is easy
to operate and maintain and can slide on and off of a vehicle as needed. The
WATERAX pump ensures quality, reliability, and durability while the lightweight
non-corrosive piping makes for an enduring robust plumbing system. The entire
assembly is firmly mounted on a matte copolymer polypropylene base with rails
and cut-outs for easy lifting.
Applications
Features and Benefits
• Attack line firefighting
• Turnkey solution ready to deploy and operate.
• Park and spot fire patrol
• Easy to operate and maintain
• Prescribed burns
• Compact and lightweight ideal for
rapid intervention
• Mop-up operations
• Can slide on and off a vehicle as needed
• Robust base with rails and cut-outs
for easy lifting
• Optional foam capability
• Optional canvas cover for unit protection
during transport and storage.
RANCHER-65,
RANCHER-125
LIGHTWEIGHT SKID UNIT
The WATERAX RANCHER® unit is offered in 65 US gal (246 L) and 125 US gal (473 L) tank configurations. The 125 US gal (473 L) tank
features a Surge Buster® surge control system providing additional operational safety and stability. Choice of NH and NSPH threads for the 1.5”
(38 mm) discharge and overboard suction with corresponding caps. Units can also come equipped with Scotty foam educator/mixer. Optional
canvas covers (RNCH65-COVER / RNCH125-COVER) available for unit protection during transport and storage.
RANCHER-65
01/2015
RANCHER-125
23
24
PRODUCT GUIDE 2015
|
BACKPAX
SERIES
TM
The WATERAX BACKPAX™ is a line of backpack pumps that were
conceived with the comfort and safety of the user in mind. They come with
a rigid or flexible tank and are equipped with an ergonomic and sturdy
brass hand pump.
Applications
• Hot Spotting
• Mop-up
• Prescribed burn operations
• Campsite protection
• Industrial operations
HPC-X
BRASS HAND PUMP
The all-new WATERAX HPC-X brass hand pump design features a forward grooved hand
grip and a rear pistol grip that makes operating the hand pump easier on the wrist and requires
less effort than standard hand pumps. It is easy to maintain and is field-reparable. It includes
a locking mechanism to prevent drag, extension by gravity, and water loss through drip. The
combination tip allows for quick change from spray to straight stream without any tools.
Grooved rubber hand grip
Sturdy pistol grip
Interchangeable nozzle
stream/spray
Features and Benefits
• All brass and stainless steel construction
• Sturdy and ergonomic nylon rear pistol grip
• Grooved forward rubber grip
• Dual nozzle: stream/spray
• Field reparable
• Locking feature
• D-ring for clipping to shoulder straps
• Ambidextrous
01/2015
PRODUCT GUIDE 2015
OT-4NX
POLY BACKPACK WITH
BRASS HAND PUMP
|
The WATERAX OT-4NX is a modernized poly backpack pump that was conceived with the
comfort and safety of the user in mind. The tank is made of lightweight yet rugged UV-resistant
polyethylene making it easier to carry without compromising on durability. Ergonomics can be
felt through the sleek contours of the tank, the integrated lumbar support, and the comfortable
shoulder straps. The robust carrying handle makes for easy lifting and also serves as a port where
the hand pump can be neatly docked. The large diameter filler neck allows convenient filling,
cleaning access, and features a filler strainer to capture and prevent unwanted particles from
entering the hand pump’s water supply.
The all-new brass hand pump design that features a forward grooved hand grip, a robust D-ring
for clipping to the shoulder straps, and a rear pistol grip that makes operating the hand pump
easier on the wrist and requires less effort than standard hand pumps.
Dimensions
Height
22.8” (580 cm)
Depth
8.46” (215 cm)
Width
15.8” (402 cm)
Capacity
5.3 US gal (20 L)
Dry Weight 8.5 lbs (3.8 kg))
Wet Weight 52.6 lbs (23.9 kg)
HPO-2X
COLLAPSIBLE BACKPACK WITH
BRASS HAND PUMP
Tank
• Made of UV and corrosion resistant polyethylene
• Integrated lumbar support
• Durable brass elbow fitting for hose connection
to tank
• Carry handle also functions as storage
for the pump
• Comfortable and ergonomic
• Comfortable shoulder straps
• Delivered assembled
• Water level indicators (US Gallons & Liters)
The WATERAX HPO-2X is a rugged collapsible backpack made of durable nylon fibrecoated
with neoprene.The neoprene bag is UV resistant and fireproof. It also offers exceptional abrasion
resistance and can easily be repaired in the field with standard tire patches.
The all-new brass hand pump design features a forward grooved hand grip and a rear pistol grip
that makes operating the hand pump easier on the wrist and requires less effort than standard
hand pumps.
Dimensions
Height
29” (737mm)
Width
20” (508mm)
Capacity
5 US gal / 19 L
Dry Weight
5 Lbs (2.2 Kg)
Wet Weight 46.8 Lbs (21.2 Kg)
01/2015
Features and Benefits
Features and Benefits
Bag
• Made of Nylon fibre coated with Neoprene
• Excellent abrasion resistance
• Field repairable
• Fireproof
• UV and ozone resistant
• Oil and gasoline resistant
• Collapsible for optimal transport
and storage efficiency
25
26
PRODUCT GUIDE 2015
|
PUMP
FUEL
ENGINE
STROKE
PUMP
END
STAGE
SUCTION
DISCHARGE
MAXIMUM
PRESSURE
FREE
FLOW
MAXIMUM
HEAD
SEGMENT
MARK-3
Gas/Oil
50:1
WATERAX
10HP
2
12-16S
4-Stage
2" NPSH
1.5” NPSH
380 PSI
26.2 BAR
98 US GPM
371 L/M
878’
268 M
Backpackable
High Pressure
BB-4-18
Gas
B&S
18 HP
4
12-16S
4-Stage
2" NPSH
1.5” NPSH
104 US GPM
394 L/M
1016’
310 M
High Pressure
BB-4-21
Gas
HONDA
21 HP
4
12-16S
4-Stage
2" NPSH
1.5” NPSH
440 PSI
30.3 BAR
106 US GPM
401 L/M
1016’
310 M
High Pressure
BB-4-23
Gas
B&S
23 HP
4
12-16S
4-Stage
2" NPSH
1.5” NPSH
440 PSI
30.3 BAR
106 US GPM
401 L/M
1016’
310 M
High Pressure
BB-4-D902
Diesel
Kubota
25 HP
4
12-16S
4-Stage
2" NPSH
1.5” NPSH
395 PSI
27.2 BAR
106 US GPM
401 L/M
911’
278 M
High Pressure
STRIKER-3
Gas
HONDA
13 HP
4
18-16S
3-Stage
2" NPSH
1.5” NPSH
345 PSI
23.8 BAR
102 US GPM
386 L/M
797’
243 M
High Pressure
STRIKER-2
Gas
HONDA
13 HP
4
25-16S
2-Stage
2" NPSH
1.5” NPSH
230 PSI
15.9 BAR
105 US GPM
397 L/M
531’
162 M
High Pressure
B2X-18
Gas
B&S
18 HP
4
B2X
2-Stage
3" NPT / 4" VIC
2.5” NPT / 3” VIC
190 PSI
13.1 BAR
300 US GPM
1136 L/M
439’
134 M
Mid-Range
B2X-21
Gas
HONDA
21 HP
4
B2X
2-Stage
3" NPT / 4" VIC
2.5” NPT / 3” VIC
200 PSI
13.8 BAR
300 US GPM
1136 L/M
462’
141 M
Mid-Range
B2X-23
Gas
B&S
23 HP
4
B2X
2-Stage
3" NPT / 4" VIC
2.5” NPT / 3” VIC
200 PSI
13.8 BAR
300 US GPM
1136 L/M
462’
141 M
Mid-Range
B2X-D902
Diesel
Kubota
25 HP
4
B2X
2-Stage
3" NPT / 4" VIC
2.5” NPT / 3” VIC
180 PSI
12.4 BAR
320 US GPM
1211 L/M
415’
127 M
Mid-Range
VERSAX-6
Gas
HONDA
6.5 HP
4
—
2-Stage
2" NPT
2x 1”, 1.5” NPT
120 PSI
8.3 BAR
105 US GPM
397 L/M
277’
84 M
Self-Priming
Multipurpose
VERSAX-9
Gas
HONDA
9 HP
4
—
2-Stage
2" NPT
2x 1”, 1.5” NPT
150 PSI
10.3 BAR
105 US GPM
397 L/M
347’
106 M
Self-Priming
Multipurpose
VERSAX-9E
Gas
HONDA
9E HP
4
—
2-Stage
2" NPT
2x 1”, 1.5” NPT
150 PSI
10.3 BAR
105 US GPM
397 L/M
347’
106 M
Self-Priming
Multipurpose
MINI
STRIKER
Gas
HONDA
2.5 HP
4
—
1-Stage
1.5" NPSH
1.5” NPSH
85 PSI
5.9 BAR
80 US GPM
303 L/M
196’
60 M
Lightweight
High Pressure
440 PSI
30.3 BAR
01/2015
PRODUCT GUIDE 2015
|
WATERAX COMPONENTS
WATERAX offers a series of components tailored to OEM’s who manufacture brush trucks, slip-ons, sprinkler systems,
and fire apparatus.
Designed and manufactured with the same high quality standards, these components are the perfect complement to your
WATERAX pumps:
• The WATERAX XCP Series control panels are all equipped with a plug and play FastWireTM system for ease of installation
and to ensure flawless performance of your pump unit.
• Also available are a wide variety of kits and accessories namely, primer kits, foam kits, FastWire cables, electric kits, and
fuel tanks.
• The WATERAX discharge manifolds are ideal when assembling brush trucks and skid units which make use of Victaulic
couplings to dampen vibrations and to facilitate in the field maintenance.
01/2015
27
28
PRODUCT GUIDE 2015
|
XCP
TM
SERIES
The WATERAX XCPTM Series is a full line of reliable and durable control panels specially designed
to easily operate the WATERAX vehicle mounted pumps.
All WATERAX control panels are equipped with FastWireTM
connectors that provide ease of installation via a simple plug and
play system.
WATERAX also offers a Low Pressure Protection (LPP) system that protects your pump end
against costly damages caused by running dry.
MCP
MINI CONTROL PANEL
Designed for OEMs who want a cost effective remote mounted solution, the Mini Control Panel
offers all the basic functionality including a Vernier throttle, low oil light, choke cable, pressure
gauge, and LPP system.
PMSCP
PANEL MOUNT STANDARD CONTROL PANEL
Designed for OEMs who want to integrate their control panel into their fire apparatus panel
enclosure, the Panel Mount Standard Control Panel is the ideal solution. It also comes with
a provision for a primer, and an optional Low Pressure Protection, Glow Plug Timer and High
Water Temperature Warning Light.
WCP
WATERAX CONTROL PANEL
Designed for OEMs who want a complete remote mounted solution the WATERAX Control Panel
offers a maximum of features, namely an hour meter, a large pressure gauge, an energy efficient LED
panel light, an LPP system and optional level monitors, LED work light and electric primer.
All XCPs also come with a comprehensive installation instruction that significantly reduce the
installation time.
01/2015
PRODUCT GUIDE 2015
OPTIONS
Low Pressure Protection
Weight
Steel, powder coated black
Vernier throttle with red emergency throttle idle push button
Push/Pull engine choke cable
Toggle switch
Push button
Dual unit 0-600 PSI/0-4000 kilopascals 2.5" dial
LED, red
Quick-Connect 8-pin female industrial sealed connector
8" W x 6-3/8" D x 6" H
MODEL
7 psi cutout switch w/ override
OPTIONS
Low Pressure Protection
Glow Plug Timer
High Water Temp. Warning Light
Weight
SPECIFICATIONS
Enclosure
Throttle Control
Choke Control
Master
Engine Start
Pressure Gauge
Panel Light
Hour meter / Tachometer
Low Oil Alert
FastWire Control Cable
FastWire Power Cable
Circuit protection
Dimensions
OPTIONS
Low Pressure Protection
Work Light
Electric Primer
Water Level Monitor
Foam Level Monitor
Weight
Standard s
Option o
Not Applicable 01/2015
MCP
S
7.3 lbs
PANEL MOUNT STANDARD CONTROL PANEL
SPECIFICATIONS
Enclosure
Throttle Control
Choke Control
Master
Engine Start
Pressure Gauge
Low Oil Alert
FastWire Control Cable
Dimensions
29
MINI CONTROL PANEL
SPECIFICATIONS
Enclosure
Throttle Control
Choke Control
Master
Engine Start
Pressure Gauge
Low Oil Alert
FastWire Control Cable
Dimensions
|
Black anodized aluminum
Vernier throttle with red emergency throttle idle push button
Push/Pull engine choke cable
LED, Stainless steel toggle button
Stainless steel push button
Compound -30 in Hg - 0 - 600 psi, 2.5" dial
Daylight visible LED, red
Quick-Connect 8-pin female industrial sealed connector
12-1/4" W x 3-1/4" D x 4-7/8" H
MODEL
7 psi cutout switch w/ override
Daylight visible LED, red
PMSCP
—
—
—
5.5 lbs
PMSCP-LPP
S
—
—
6 lbs
PMSCP-DIESEL
S
S
S
6.5 lbs
WATERAX CONTROL PANEL
Stainless steel, closed, w/ protective handles
Vernier throttle with red emergency throttle idle push button
Push/Pull engine choke cable
Toggle switch with flip switch protector
Push button
Compound -30 in Hg - 0 - 600 psi, 4" dial
Dual LED panel light
SenDEC, LCD display
Daylight visible LED, red
Quick-connect 8-pin female industrial sealed connector
1' PWR CBL w/ Anderson connector
15A sealed circuit breaker
12" W x 8" D x 13-5/8" H
MODEL
7 psi cutout switch w/ override
Light w/Toggle Switch
Electric Primer w/Momentary Switch
IC, 14 LED display, 180 deg. Visibility
IC, 14 LED display, 180 deg. visibility, Class A
WCP
S
O
O
—
—
24.5 lbs
WCP-F
S
O
O
—
S
25.2 lbs
WCP-W
S
O
O
S
—
25.2 lbs
WCP-FW
S
O
O
S
S
25.9 lbs
30
PRODUCT GUIDE 2015
|
AIR TRANSPORT FUEL TANK
MODEL NO. FA-552Q
Tough, lightweight, and rust proof with its unique and integrated fuel supply adaptor, this
container meets the rigid US Military and UN standards (certification #MIL-C-53109). It is the
only container to be registered by Transport Canada for UN performance packaging
(certification #UN 3H1 / Y1.0/200 / yy / Can / Spr 2 456 / 2.3mm). Seamless all-plastic material,
permanently “Olive Drab” colored finish. 5.3 US gals (20 L). Includes inner filter and ball type
1/4-turn fuel supply adaptor B-7462.
Approved for air transport via rotary or fixed wing aircraft.
Options
12-401B-NS 51” (1.3 m) fuel supply hose with priming bulb.
R-712 1/4-turn handle.
R-732 Connector.
A-7487 Fuel dust cap.
B-7462
FA-552Q shown with optional (12-401B-NS)
fuel supply hose with priming bulb and
optional (R-712) 1/4-turn handle.
METAL JERRY CAN
MODEL NO. FA-352GSA-N
Heavy- duty construction throughout, this pick-up portable unit has no petcock or other
cumbersome protrusions. Its self-sealing quick coupler enables gasoline line to be changed
from one can to another in seconds. 5 US gals (18.9 L). US Forest Service approved.
NSN 7240-01-044-5523
Options
12-401B 5’ (1.5 m) fuel supply hose with priming bulb and SAE swivel female connectors.
R-1206A-GSA 12-401B with B-7527 Male plug with o-rings. NSN 4210-00-568-9904
FA-352GSA-N
shown with optional
fuel line R-1206A-GSA
FUEL CARRYING TANK
MODEL NO. FA-452 / FA-452-3
The slim design of this marine fuel tank allows storing standing up or lying down.
Comes with a standard fuel gauge. UL and CSA standards certification for portable
marine fuel tanks. High-density polyethylene, permanently red colored.
Capacity of 6.6 US gals (25 L) or 3.2 US gals (12 L).
EPA Compliant Options
12-401B-NS 51” (1.3 m) fuel supply hose with priming bulb.
R-712 1/4-turn handle.
R-732 Connector.
A-7487 Fuel dust cap.
FA-452 shown with fuel supply hose with priming
bulb and handle quick-connect 12-401B-NS and
optional (R-712) 1/4-turn handle.
01/2015
PRODUCT GUIDE 2015
|
31
KITS & ACCESSORIES
PRIMER KIT
GZPRIMERKIT
Guzzler Hand Primer
with hose & valve
EPRIMERKIT
Electric Primer w/ plate,
5’ harness & switch
FASTWIRE CABLES
FWX-3
3’ CTRL Cable extension
w/ two 8 pin connectors
FWX-D902-3
3’ CTRL Cable extension
w/ two 14 pin connectors
FWP-20
20’ PWR Cable w/ lugs & Anderson
connector for connecting the pump
directly to a vehicule battery
FWP-9
9’ PWR Cable w/ lugs &
Anderson connector for
connecting the battery kit
to the pump.
Included in BATKIT-66
FWP-3
3’ PWR Cable w/ lugs & Anderson
connector for connecting the battery
kit or battery cable on a unit that is not
equipped with a WCP control panel
FOAM KIT
FOAMKIT
Scotty eductor w/ bracket
& plumbing
FOAMCPKIT
Scotty eductor and foam
pro w/brcket & plumbing
ELECTRIC KIT
BATKIT-66
12 V, 66ah Deep Cycle Battery Kit
w/ FWP-9 cable,
Vehicle mount
BATKIT-20-P
12V 20ah Battery Kit,
Portable
WLIGHTKIT
LED Work Light w/ 5’ harness
& toggle switch
TOWER MANIFOLD
The all new WATERAX Tower Manifolds allow for compact efficient design of plumbing where water circuits are centralized
and easily identifiable. Available in two formats, they are made of durable stainless steel material with an electro-polished finish.
TWR MNFLD-1515:
• Fully Stainless Steel – Electro Polished
• 1 X 2” Victaulic Inlet
• 3 X 1-1/2” Male NPT Discharges
• 3 X 1” Male NPT Discharges
• 1 X ¾” Female NPT Port
• 3 X 3/8” Female NPT Ports
01/2015
TWR MNFLD-1520:
• Fully Stainless Steel – Electro Polished
• 1 X 2” Victaulic Inlet
• 1 X 2” Male NPT Discharge
• 2 X 1-1/2” Male NPT Discharges
• 3 X 1” Male NPT Discharges
• 1 X ¾” Female NPT Port
• 3 X 3/8” Female NPT Ports
32
PRODUCT GUIDE 2015
|
MID-RANGE COMPONENTS
1
6
5
2
4
3
ID.
KIT
ITEM NO.
1
B2X-23V MID-RANGE FIRE PUMP, 2-STG, B&S23
100072
2
DVK-B2X DRAIN VALVE KIT FOR B2X
250269
3
VIC-3020 VICTAULIC GROOVED COUPLING 3 TO 2” GALV
801100
4
TWR MNFLD-1515 MANIFOLD DUAL 1.5" DISCHARGE
701152
5
FOAMCPKIT SCOTTY EDUCTOR AND FOAM PRO W/HARDWARE
250267
6
WCP-FW WATERAX CONTROL PANEL FOAM+WATER
250236
01/2015
PRODUCT GUIDE 2015
|
33
HIGH PRESSURE COMPONENTS
1
2
6
5
4
3
ID.
01/2015
KIT
ITEM NO.
1
STR3-13V HIGH-PRESS FIRE PUMP 3-STG HON GX390
100047
2
DVK DRAIN VALVE KIT
250282
3
CHCKVLV MNFLD-15 FOR HIGH PRESSURE PUMPS
250265
4
GZPRIMERKIT GZ HND PRMR W/PLUMBING
250237
5
FOAMKIT SCOTTY EDUCTOR W/ BRACKET & PLUMBING
250266
6
MCP MINI CTRL PNL W/FW CONN
250234
34
PUMP SELECTION MATRIX
PUMP MODEL SELECTOR
PRODUCT GUIDE 2015
|
PUMP SELECTION MATRIX
Table of contents
BB-4-18 ......................................................................................... page 36
BB-4-21/23 ..................................................................................
page 37
BB-4-D902 DIESEL ..................................................................... page 38
B2X-18 .......................................................................................... page 39
B2X-21/23 .................................................................................... page 40
B2X-D902 DIESEL ....................................................................... page 41
STRIKER-3 .................................................................................... page 42
STRIKER-2 .................................................................................... page 43
VERSAX® ...................................................................................... page 44
MINI-STRIKER® ........................................................................... page 45
RANCHER® .................................................................................. page 46
MARK-3® ...................................................................................... page 47
Technical data sheets containing further information on WATERAX pumps are
available on request from your local WATERAX representative or from our
website www.waterax.com
www.waterax.com • 1-855-616-1818
01/2015
PUMP SELECTION MATRIX
|
PRODUCT GUIDE 2015
35
PUMP MODEL SELECTOR
B2X - 18
SERIES
ENGINE
SELECTOR
P
XTC
CONFIGURATION
OPTIONS
ID
SEGMENT
SERIES
MODEL
# STAGE
B2X
BB-4
STR3
STR2
MSTR
VS2
Mid-Range
High Pressure
High Pressure
High Pressure
Lightweight High Pressure
Self-Priming Multipurpose
B2X
BB-4
STRIKER-3
STRIKER-2
MINI-STRIKER
VERSAX
2-Stage
4-Stage
3-Stage
2-Stage
1-Stage
2-Stage
ID
BRAND
ENGINE
MODEL
POWER
—
6
9
9E
13
18
21
23
D902
Honda
Honda
Honda
Honda
Honda
B&S
Honda
B&S
Kubota
GHX50
GX200
GX270
GX270E
GX390
VANGUARD 18
GX630
VANGUARD 23
D902
2.5 HP
6 HP
9 HP
9 HP
13 HP
18 HP
21 HP
23 HP
25 HP
ID
TYPE CONFIGURATION
FRAME
DRIVE ORIENTATION
P
V
H
Portable
Vehicle Mount
Vehicle Mount
Carry Frame / Handle
Base Mount
Base Mount
Vertical
Vertical
Horizontal
SELECTOR
SELECTOR
SELECTOR
OPTIONS
ID
DESCRIPTION C
Engine Mount Control Panel
T
Fuel Tank
X
Exhaust Primer
E
Electric Package
S
Special
Valid for all pump units, excluding the 2-stroke MARK-3 Series.
Not all combinations are available, please refer to the pump selection matrix for available models.
01/2015
®
[Torque]
Orientation (timing belt, 1.88 : 1 speed increasing ratio)
Pump Type
Pump
Standard Connections
Engine Type
Engine Max Power
Drive
Frame
s
o
-
www.waterax.com • 1-855-616-1818
Standard
Option
Not Applicable
FastWire CTRL Cable
Discharge Gauge
Controls
Fuel Tank
Muffler
Primer
Guzzler Hand Primer
Remote Exhaust Primer w/Control Cable
Exhaust Primer
Electric Package - Electric Primer, LED work light, & Battery
Horizontal low tone
Dual low tone
Exhaust primer muffler
Integral / 1.75 US gallons (6.6 L)
Integral / 1 US gallon (3.8 L) w/ 3-way valve
Engine Mount Control Panel
Remote Mount Control Panel - XCP Series
0-600 psi, 2-1/2" dial
B&S 3' CTRL Cable with 8 pin connector (FWC-B-3)
Honda GX630 3’ CTRL Cable with 8 pin connector (FWC-H-3)
* Approximated and varies based off option selections
Dry Weight*
Performance
(standard NFPA
Conditions)
Flow @ 150 PSI (10.3 BAR)
Flow @ 250 PSI (17.2 BAR)
Flow @ 350 PSI (24.1 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
18 HP
18 HP
BB-4
B2X
PRODUCT SELECTION MATRIX
SPECIFICATIONS
OPTIONS
BB-4-18HT
BB-4-18HX BB-4-18HXT
s
s
o
s
-
01/2015
BB-4-18HT
s
o
s
-
157 lbs
(71 kg)
BB-4-18H
153 lbs
(69 kg)
s
s
o
s
-
BB-4-18HX
157 lbs
(71 kg)
s
s
s
o
s
-
BB-4-18HXT
161 lbs
(73 kg)
Horizontal
Base Mount with Industrial Isolators
BB-4-18H
BB-4-18 Vehicle Mount Horizontal Drive
BB-4-18VT
BB-4-18VX
BB-4-18VXT
s
o
s
-
BB-4-18V
153 lbs
(69 kg)
s
s
o
s
-
BB-4-18VT
157 lbs
(71 kg)
s
s
o
s
-
BB-4-18VX
157 lbs
(71 kg)
s
s
s
o
s
-
BB-4-18VXT
161 lbs
(73 kg)
100 GPM (379 lpm)
83 GPM (303 lpm)
50 GPM (189 lpm)
440 PSI (30.3 BAR)
106 GPM (401 lpm)
4-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
B&S Vanguard
18 hp (13.4 KW) @ 4000 RPM
[26.9 lb-ft (36.5 Nm) @ 2800 RPM]
Vertical
Base Mount with Industrial Isolators
BB-4-18V
BB-4-18 Vehicle Mount Vertical Drive
172 lbs
(78 kg)
176 lbs
(80 kg)
Vertical
Carry Frame
194 lbs
(88 kg)
BB-4-18PTC BB-4-18PXTC BB-4-18PETC
s
s
s
-
s
s
s
s
s
-
s
s
s
s
s
-
s
s
s
s
s
-
BB-4-18P BB-4-18PTC BB-4-18PXTC BB-4-18PETC
167 lbs
(76 kg)
BB-4-18P
BB-4-18 Portable
36
®
[Torque]
(timing belt, 1.88 : 1 speed increasing ratio) Orientation
Pump Type
Pump
Standard Connections
Engine Type
Engine Max Power
Drive
Frame
s
o
-
www.waterax.com • 1-855-616-1818
Standard
Option
Not Applicable
FastWire CTRL Cable
Discharge Gauge
Check Valve Manifold
Controls
Fuel Tank
Muffler
Primer
Guzzler Hand Primer
Remote Exhaust Primer w/Control Cable
Exhaust Primer
Electric Package - Electric Primer, LED work light, & Battery
Horizontal low tone
Dual low tone
Exhaust primer muffler
Integral / 1.75 US gallons (6.6 L)
Integral / 1 US gallon (3.8 L) w/ 3-way valve
Engine Mount Control Panel
Remote Mount Control Panel - XCP Series
0-600 psi, 2-1/2" dial
1-1/2" NPSH
B&S 3' CTRL Cable with 8 pin connector (FWC-B-3)
Honda GX630 3’ CTRL Cable with 8 pin connector (FWC-H-3)
* Approximated and varies based off option selections
Dry Weight*
Performance
(standard NFPA
Conditions)
Flow @ 150 PSI
(10.3 bar)
Flow @ 250 PSI
(17.2 bar)
Flow @ 350 PSI
(24.1 bar)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
21 / 23 HP
BB-4
PRODUCT SELECTION MATRIX
SPECIFICATIONS
OPTIONS
BB-4-23H
s
o
s
-
156 lbs
(71 kg)
s
o
s
01/2015
BB-4-23HX
s
s
o
s
-
BB-4-23HX
164 lbs
(74 kg)
23 hp (17.2 KW) @ 3600 RPM
[32.75 lb-ft (44.4 Nm) @ 2600 RPM]
Horizontal
Base Mount with Industrial Isolators
BB-4-23H
BB-4-23 Vehicle Mount Horizontal Drive
BB-4-21H
169 lbs
(77 kg)
103 GPM (390 lpm)
94 GPM (356 lpm)
65 GPM (246 lpm)
440 PSI (30.3 bar)
106 GPM (401 lpm)
4-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
Honda GX630
20.8 hp (15.5 KW) @ 3600 RPM
[35.6 lb-ft (48.3 Nm) @ 2500 RPM]
Horizontal
Base Mount with Industrial Isolators
BB-4-21H
BB-4-21 Vehicle Mount Horizontal Drive
BB-4-23VX
s
o
s
-
BB-4-23V
154 lbs
(70 kg)
s
s
o
s
-
BB-4-23VX
162 lbs
(73 kg)
105 GPM (397 lpm)
95 GPM (360 lpm)
65 GPM (246 lpm)
440 PSI (30.3 bar)
106 GPM (401 lpm)
4-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
B&S Vanguard
23 hp (17.2 KW) @ 3600 RPM
[32.75 lb-ft (44.4 Nm) @ 2600 RPM]
Vertical
Base Mount with Industrial Isolators
BB-4-23V
BB-4-23 Vehicle Mount Vertical Drive
BB-4-23PC
BB-4-23PXTC BB-4-23PETC
s
s
s
s
-
BB-4-23P
164 lbs
(74 kg)
170 lbs
(77 kg)
195 lbs
(88 kg)
s
s
s
s
s
-
s
s
s
s
s
s
-
s
s
s
s
s
s
-
BB-4-23PC BB-4-23PXTC BB-4-23PETC
165 lbs
(75 kg)
23 hp (17.2 KW) @ 3600 RPM
[32.75 lb-ft (44.4 Nm) @ 2600 RPM]
Vertical
Carry Frame
BB-4-23P
BB-4-23 Portable
37
®
Discharge
Fuel Injected Liquid Cooled Diesel
Engine Type
LxWxH
Dimensions
Dry Weight*
Orientation (timing belt, 1.88:1 speed increasing ratio)
Drive
Frame
Engine Max Power
Intake
106 GPM (401 lpm)
Maximum Flow
Pump Standard
Connections
395 PSI (27.2 bar)
Maximun Pressure
Fastwire
Controls
Muffler
Primer
O
O
O
Forestry Approved Spark Arrestor
PMSCP-DIESEL
LOFA
01/2015
S
Rain Cap
www.waterax.com • 1-855-616-1818
O
O
Electric Primer
FWX-D902-3 3’ Extension Harness
O
Guzzler Hand Primer
280 lbs (127 kg)
39.8”x 20.6” x 37”
4 Leg Mounts
4 Leg Mounts
O
O
O
O
S
O
O
280 lbs (127 kg)
39.8”x 21.9” x 37”
24.8 HP (18.5 kW) @ 3600 RPM [40.6 lb-ft (55 Nm) @ 2600 RPM]
Kubota D902-E4B 3-Cylinder
1-1/2" Male NPSH
2" Male NPSH
Detachable 4-Stage Centrifugal Pump
106 GPM (401 lpm)
Flow @ 150 PSI (10.3 BAR)
High Pressure
103 GPM (390 lpm)
Flow @ 100 PSI (6.9 BAR)
BB-4-D902H
BB-4-D902V
65 GPM (246 lpm)
BB-4 DIESEL Vehicle Mount Horizontal Drive
BB-4 DIESEL Vehicle Mount Vertical Drive
Flow @ 50 PSI (3.4 BAR)
Pump Type
Performance
(standard NFPA
Conditions)
Standard s
Option o
Not Applicable —
OPTIONS
* Approximated and varies based off option selections
SPECIFICATIONS
DIESEL 25 HP
BB-4
PRODUCT SELECTION MATRIX
38
38
[Torque]
Orientation (timing belt, 1.88 : 1 speed increasing ratio)
Pump Type
Pump
Standard Connections
Engine Type
Engine Max Power
Drive
Frame
Standard
Option
Not Applicable
s
o
-
FastWire CTRL Cable
Discharge Gauge
Controls
Fuel Tank
Muffler
Primer
Guzzler Hand Primer
Remote Exhaust Primer w/Control Cable
Exhaust Primer
Electric Package - Electric Primer, LED work light, & Battery
Horizontal low tone
Dual low tone
Exhaust primer muffler
Integral / 1.75 US gallons (6.6 L)
Integral / 1 US gallon (3.8 L) w/ 3-way valve
Engine Mount Control Panel
Remote Mount Control Panel - XCP Series
0-600 psi, 2-1/2" dial
B&S 3' CTRL Cable with 8 pin connector (FWC-B-3)
Honda GX630 3’ CTRL Cable with 8 pin connector (FWC-H-3)
www.waterax.com • 1-855-616-1818
OPTIONS
* Approximated and varies based off option selections
Dry Weight*
Performance
(standard NFPA
Conditions)
Flow @ 50 PSI (3.4 BAR)
Flow @ 100 PSI (6.9 BAR)
Flow @ 150 PSI (10.3 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
18 HP
18 HP
SPECIFICATIONS
TM
B2X
B2X
PRODUCT SELECTION MATRIX
B2X-18HT
B2X-18HX
B2X-18HXT
s
s
o
s
-
01/2015
B2X-18HT
s
o
s
-
157 lbs
(71 kg)
B2X-18H
153 lbs
(69 kg)
s
s
o
s
-
B2X-18HX
157 lbs
(71 kg)
s
s
s
o
s
-
B2X-18HXT
161 lbs
(73 kg)
Horizontal
Base Mount with Industrial Isolators
B2X-18H
B2X-18 Vehicle Mount Horizontal Drive
B2X-18VT
B2X-18VX
B2X-18VXT
s
o
s
-
B2X-18V
153 lbs
(69 kg)
s
s
o
s
-
B2X-18VT
157 lbs
(71 kg)
s
s
o
s
-
B2X-18VX
157 lbs
(71 kg)
s
s
s
o
s
-
B2X-18VXT
161 lbs
(73 kg)
255 GPM (965 lpm)
155 GPM (587 lpm)
65 GPM (246 lpm)
190 PSI (13.1 BAR)
300 GPM (1136 lpm)
2-Stage Centrifugal Pump
3" Female NPT/4" VIC Combination
2-1/2" Female NPT/3" VIC Combination
B&S Vanguard
18 hp (13.4 KW) @ 4000 RPM
[26.9 lb-ft (36.5 Nm) @ 2800 RPM]
Vertical
Base Mount with Industrial Isolators
B2X-18V
B2X-18 Vehicle Mount Vertical Drive
s
s
s
-
B2X-18P
167 lbs
(76 kg)
B2X-18P
176 lbs
(80 kg)
s
s
s
s
s
-
s
s
s
s
s
-
s
s
s
s
s
-
B2X-18PTC B2X-18PXTC B2X-18PETC
172 lbs
(78 kg)
194 lbs
(88 kg)
B2X-18PXTC B2X-18PETC
Vertical
Carry Frame
B2X-18PTC
B2X-18 Portable
39
39
[Torque]
Orientation (timing belt, 1.88 : 1 speed increasing ratio)
Pump Type
Pump
Standard Connections
Engine Type
Engine Max Power
Drive
Frame
s
o
-
www.waterax.com • 1-855-616-1818
Standard
Option
Not Applicable
FastWire CTRL Cable
Discharge Gauge
Controls
Fuel Tank
Muffler
Primer
Guzzler Hand Primer
Remote Exhaust Primer w/Control Cable
Exhaust Primer
Electric Package - Electric Primer, LED work light, & Battery
Horizontal low tone
Dual B&S low tone
Exhaust primer muffler
Integral / 1.75 US gallons (6.6 L)
Integral / 1 US gallon (3.8 L) w/ 3-way valve
Engine Mount Control Panel
Remote Mount Control Panel - XCP Series
0-600 psi, 2-1/2" dial
B&S 3' CTRL Cable with 8 pin connector (FWC-B-3)
Honda GX630 3’ CTRL Cable with 8 pin connector (FWC-H-3)
* Approximated and varies based off option selections
Dry Weight*
Performance
(standard NFPA
Conditions)
Flow @ 50 PSI (3.4 BAR)
Flow @ 100 PSI (6.9 BAR)
Flow @ 150 PSI (10.3 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
21 / 23 HP
TM
B2X
PRODUCT SELECTION MATRIX
SPECIFICATIONS
OPTIONS
s
o
s
B2X-21H
169 lbs
(77 kg)
01/2015
275 GPM (1041 lpm)
215 GPM (814 lpm)
112 GPM (424 lpm)
200 PSI (13.8 BAR)
300 GPM (1136 lpm)
2-Stage Centrifugal Pump
3" Female NPT/4" VIC Combination
2-1/2" Female NPT/3" VIC Combination
Honda GX630
20.8 hp (15.5 KW) @ 3600 RPM
[35.6 lb-ft (48.3 Nm) @ 2500 RPM]
Horizontal
Base Mount with Industrial Isolators
B2X-21H
B2X-21 Vehicle Mount Horizontal Drive
B2X-23HX
B2X-23HX
s
s
o
s
-
s
o
s
-
164 lbs
(74 kg)
B2X-23H
156 lbs
(71 kg)
Horizontal
Base Mount with Industrial Isolators
B2X-23H
B2X-23 Vehicle Mount Horizontal Drive
B2X-23VX
s
o
s
-
B2X-23V
156 lbs
(71 kg)
s
s
o
s
-
B2X-23VX
162 lbs
(73 kg)
285 GPM (1079 lpm)
215 GPM (814 lpm)
100 GPM (379 lpm)
200 PSI (13.8 BAR)
300 GPM (1136 lpm)
2-Stage Centrifugal Pump
3" Female NPT/4" VIC Combination
2-1/2" Female NPT/3" VIC Combination
B&S Vanguard
23 hp (17.2 KW) @ 3600 RPM
[32.75 lb-ft (44.4 Nm) @ 2600 RPM]
Vertical
Base Mount with Industrial Isolators
B2X-23V
B2X-23 Vehicle Mount Vertical Drive
B2X-23 Portable
s
s
s
-
B2X-23P
167 lbs
(76 kg)
170 lbs
(77 kg)
195 lbs
(88 kg)
s
s
s
s
-
s
s
s
s
s
-
s
s
s
s
s
-
B2X-23PC B2X-23PXTC B2X-23PETC
169 lbs
(77 kg)
Vertical
Carry Frame
B2X-23P B2X-23PC B2X-23PXTC B2X-23PETC
40
Fuel Injected Liquid Cooled Diesel
Engine Type
LxWxH
Dimensions
Dry Weight*
Orientation (timing belt, 1.88:1 speed increasing ratio)
Drive
Frame
Engine Max Power
3" Female NPT / 4" VIC Combination
Discharge
Fastwire
Controls
Muffler
Primer
O
O
O
Forestry Approved Spark Arrestor
PMSCP-DIESEL
LOFA
01/2015
S
Rain Cap
www.waterax.com • 1-855-616-1818
O
O
Electric Primer
FWX-D902-3 3’ Extension Harness
O
Guzzler Hand Primer
O
O
O
O
S
O
O
280 lbs (127 kg)
280 lbs (127 kg)
Horizontal
39.8”x 22.7” x 37”
4 Leg Mounts
39.8”x 20.6” x 37”
Vertical
24.8 HP (18.5 kW) @ 3600 RPM [40.6 lb-ft (55 Nm) @ 2600 RPM]
Kubota D902-E4B 3-Cylinder
2-1/2" Female NPT / 3" VIC Combination
Detachable 2-Stage Centrifugal Pump
Maximum Flow
Intake
180 PSI (12.4 bar)
310 GPM (1173 lpm)
Maximun Pressure
Mid-Range
112 GPM (424 lpm)
Flow @ 150 PSI (10.3 BAR)
Pump Standard
Connections
220 GPM (833 lpm)
Flow @ 100 PSI (6.9 BAR)
B2X-D902H
274 GPM (1037 lpm)
B2X-D902V
Flow @ 50 PSI (3.4 BAR)
B2X DIESEL Vehicle Mount Horizontal Drive
B2X DIESEL Vehicle Mount Vertical Drive
Pump Type
Performance
(standard NFPA
Conditions)
Standard s
Option o
Not Applicable —
OPTIONS
* Approximated and varies based off option selections
SPECIFICATIONS
DIESEL 25 HP
TM
B2X
PRODUCT SELECTION MATRIX
41
41
Orientation (timing belt, 1.88 : 1 speed increasing ratio)
Drive
Frame
Dry Weight*
Standard
Option
Not Applicable
s
o
-
Primer
Muffler
Fuel Tank
Controls
Discharge Gauge
Check Valve Manifold
FastWire CTRL Cable
Jabsco Hand Primer
Honda
1.6 US gallons (6.1 L)
Remote Mount Control Panel - XCP Series
0-600 psi, 2-1/2" dial
1-1/2" NPSH
Honda 3' CTRL Cable with 8 pin connector (FWC-H1-3)
* Approximated and varies based off option selections
[Torque]
Engine Max Power
Pump Type
Pump
Standard Connections
Engine Type
Performance
(standard NFPA Conditions)
Flow @ 100 PSI
(6.9 BAR)
Flow @ 150 PSI
(10.3 BAR)
Flow @ 200 PSI
(13.8 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
www.waterax.com • 1-855-616-1818
OPTIONS
SPECIFICATIONS
SERIES
01/2015
s
s
o
s
STR3-13V
s
s
-
STR3-13S
s
s
s
s
s
-
STR3-13P
129 lbs (59 Kg)
Carry frame
129 lbs (59 Kg)
125 lbs (57 Kg)
87 GPM (329 lpm)
75 GPM (284 lpm)
40 GPM (151 lpm)
345 PSI (23.8 BAR)
102 GPM (386 lpm)
3-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
Honda GX390
11.7 hp (8.7 kW) @ 3,600 rpm
[19.5 lb-ft (26.4 Nm) @ 2500 RPM]
Vertical
Carry frame
Base Mount with Industrial Isolators
STR3-13P
STR3-13S
STR3-13V
STRIKER-3 Portable
STRIKER-3 Portable
STRIKER-3 Vehicule Mount
STRIKER-3
PRODUCT SELECTION MATRIX
42
42
Orientation (timing belt, 1.88 : 1 speed increasing ratio)
Drive
Frame
Dry Weight*
Standard
Option
Not Applicable
s
o
-
Primer
Muffler
Fuel Tank
Controls
Discharge Gauge
Check Valve Manifold
FastWire CTRL Cable
Jabsco Hand Primer
Honda
1.6 US gallons (6.1 L)
Remote Mount Control Panels - XCP Series
0-600 psi, 2-1/2" dial
1-1/2" NPSH
Honda 3' CTRL Cable with 8 pin connector (FWC-H1-3)
* Approximated and varies based off option selections
[Torque]
Engine Max Power
Pump Type
Pump
Standard Connections
Engine Type
Performance
(standard NFPA Conditions)
Flow @ 100 PSI
(6.9 BAR)
Flow @ 150 PSI
(10.3 BAR)
Flow @ 200 PSI
(13.8 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
www.waterax.com • 1-855-616-1818
SERIES
OPTIONS
SPECIFICATIONS
01/2015
STRIKER-2
PRODUCT SELECTION MATRIX
STR2-13P
STR2-13V
STR2-13V
s
s
o
s
127 lbs (58 Kg)
STR2-13P
s
s
s
s
s
-
127 lbs (58 Kg)
97 GPM (367 lpm)
80 GPM (303 lpm)
58 GPM (202 lpm)
230 PSI (15.9 BAR)
105 GPM (397 lpm)
2-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
Honda GX390
11.7 hp (8.7 kW) @ 3,600 rpm
[19.5 lb-ft (26.4 Nm) @ 2500 RPM]
Vertical
Base Mount with Industrial Isolators
Carry frame
STRIKER-2 Portable
STRIKER-2 Vehicule Mount
43
43
®
Integral
Fuel Tank
Starting
Charging 12V
Base
Dry Weight*
Standard
Option
Not Applicable
Discharge Caps
s
o
-
Frame
Controls
FastWire CTRL Cable
Carry Handle
Remote Mount Control Panel - XCP Series
Honda 3' CTRL Cable with 8 pin connector
Cap 1" NPSH
Cap 1-1/2" NPSH
* Approximated and varies based off option selections
Integral [Torque]
Engine Max Power
Engine Type
Pump
Standard Connections
Pump Type
Performance
(standard NFPA Conditions)
Flow @ 50 PSI (3.4 BAR)
Flow @ 75 PSI (5.2 BAR)
Flow @ 100 PSI (6.9 BAR)
Maximum Pressure
Maximum Flow
Medium Pressure - Low Flow
Intake
Discharge
Priming
Air Cooled Gasoline
www.waterax.com • 1-855-616-1818
OPTIONS
SPECIFICATIONS
SERIES
VERSAX
PRODUCT SELECTION MATRIX
s
s
s
VS2-6P
01/2015
57 lbs (25.9 kg)
-
VS2-6V
55.5 lbs (25 kg)
VERSAX-6 Portable
VERSAX-6 Vehicle Mount
VS2-6P
VS2-6V
83 GPM (314 lpm)
63 GPM (238 lpm)
38 GPM (144 lpm)
120 PSI (8.3 BAR)
105 GPM (397 lpm)
2-Stage Centrifugal Pump
2" Male NPT
1-1/2", 1", 1" Male NPT
2" Male BSP
Honda GX200
5.5 hp (4.1 KW) @ 3,600 RPM
[9.1 lb-ft (12.4 Nm) @ 2,500 RPM]
0.8 US Gallon (3 L)
Recoil starter
Recoil starter
Front foot support with rubber feet
s
s
s
VS2-9P
79 lbs (35.6 kg)
o
s
-
VS2-9EV
84 lbs (37.9 kg)
VERSAX-9 Portable
VERSAX-9 Vehicle Mount
VS2-9P
VS2-9EV
92 GPM (348 lpm)
80 GPM (303 lpm)
64 GPM (242 lpm)
150 PSI (10.3 BAR)
105 GPM (397 lpm)
2-Stage Centrifugal Pump
2" Male NPT
1-1/2", 1", 1" Male NPT
2" Male BSP
Honda GX270
8.5 hp (6.3 KW) @ 3,600 RPM
[14.1 lb-ft (19.1 Nm) @ 2,500 RPM]
1.4 US Gallons (5.3 L)
Recoil Starter & Electric Start
Recoil Starter
1 amp
Front foot support
-
44
44
44
Integral .2 US gal (0.77 L)
* Approximated and varies based off option selections
[Torque]
Engine Max Power
Fuel Tank
Frame
Dry Weight*
Pump Type
Pump
Standard Connections
Engine Type
Performance
(standard NFPA Conditions)
Flow @ 25 PSI
(1.7 BAR)
Flow @ 50 PSI
(3.4 BAR)
Flow @ 75 PSI
(5.2 BAR)
Maximum Pressure
Maximum Flow
High Pressure - Medium Flow
Intake
Discharge
Air Cooled Gasoline
www.waterax.com • 1-855-616-1818
SERIES
SPECIFICATIONS
®
01/2015
MSTR-P
MSTR-V
68 GPM (257 lpm)
42 GPM (159 lpm)
12 GPM (45 lpm)
85 PSI (5.9 BAR)
80 GPM (303 lpm)
1-Stage Centrifugal Pump
1-1/2" Male NPSH
1-1/2" Male NPSH
Honda GXH50
2.1 HP (1.6 kW) @ 7,000 RPM
[2.0 lb-ft (2.7 Nm) @ 4,500 RPM]
0.2 US Gallon (0.77 L)
Industrial Isolators
Poly base with rubber mount
19 lbs (8.6 kg)
20 lbs (9 kg)
MINI-STRIKER Portable
MINI-STRIKER Vehicule Mount
MINI-STRIKER
PRODUCT SELECTION MATRIX
45
45
Scotty
—
S
—
1-1/2" NH
1-1/2" NPSH
www.waterax.com • 1-855-616-1818
Standard s
Option o
Not Applicable —
Foam Eductor
Discharge & Oveboard
Suction Threads
* Approximated and varies based off option selections
—
01/2015
—
S
S
S
—
—
S
S
—
—
S
159 lbs (72 kg)
702 lbs (318 kg)
42.5" x 44" x 28"
—
S
—
S
—
S
RNCH125NF
RANCHER-125
RNCH125S
Copolymer polypropylene base with rails and cut-outs
Wet Weight*
LxWxH
[Torque]
2.1 HP (1.6 kW) @ 7,000 RPM
[2.0 lb-ft (2.7 Nm) @ 4,500 RPM]
Honda GXH50
1-Stage Centrifugal Pump
Dry Weight*
Dimensions
Base
Engine Max Power
High Pressure
Air Cooled Engine
85 PSI (5.9 BAR)
80 GPM (303 lpm)
Maximum Flow
Engine Type
12 GPM (45 lpm)
Maximun Pressure
RNCH125N
42 GPM (159 lpm)
RNCH65SF
Flow @ 75 PSI (5.2 BAR)
RNCH65NF
Flow @ 50 PSI (3.4 BAR)
RNCH65S
68 GPM (257 lpm)
RNCH65N
Flow @ 25 PSI (1.7 BAR)
Pump Type
Performance
(standard NFPA Conditions)
SERIES
RANCHER-65
®
RANCHER
PRODUCT SELECTION MATRIX
SPECIFICATIONS
OPTIONS
S
S
—
RNCH125SF
46
46
®
[Torque]
Standard
Option
Not Applicable
s
o
-
Primer
Fuel Tank
Discharge Gauge
Check Valve Manifold
Hand Primer
External
0-600 psi, 2-1/2" dial
1-1/2" NPSH
* Approximated and varies based off option selections
Frame
Dry Weight*
Engine Max Power
Pump Type
Pump
Standard Connections
Engine Type
Performance
(standard NFPA Conditions)
Flow @ 100 PSI
(6.9 BAR)
Flow @ 150 PSI
(10.3 BAR)
Flow @ 200 PSI
(13.8 BAR)
Maximum Pressure
Maximum Flow
High Pressure
Intake
Discharge
Air Cooled Gasoline
www.waterax.com • 1-855-616-1818
SERIES
OPTIONS
SPECIFICATIONS
MARK-3
PRODUCT SELECTION MATRIX
01/2015
o
o
o
o
MARK-3
78 GPM (295 lpm)
65 GPM (246 lpm)
38 GPM (144 lpm)
380 PSI (26.2 BAR)
98 GPM (371 lpm)
4-Stage Centrifugal Pump
2" Male NPSH
1-1/2" Male NPSH
WATERAX 10 HP
10 hp (7.5 kW) @ 5,500 rpm
[8.9 lb-ft (12 Nm) @ 5000 RPM]
Backpackable Frame
59.8 lbs (27.1 kg)
47
47
48
PRODUCT GUIDE 2015
|
THE WATERAX ENGINEERING TEAM
Frederic Lefrancois
VP of Product Development
Frederic leads efforts to research and develop innovative and durable pumps that can move water for
generations. An engineer by trade, Frederic has led multidisciplinary teams and successfully managed ambitious
projects for more than 15 years.
The WATERAX engineering team’s success stems from synergy between three key components: people,
process & technology.
People
At WATERAX we believe that winning teams are composed of skilled, complementary individuals who share a common goal and who bring
experience, drive and passion to the table. Our core expertise includes mechanical, hydraulic and industrial design, combined with specialization
in power trains, software & electronics.
Process
WATERAX has integrated a Stage-GateTM product development process that
guides us from conception to production. Daily meetings, inspired by the Agile
development philosophy, enable us to align priorities and ensure effective
communication within the team. We are also big believers in value engineering
(VE) which helps us offer best value products to our customers.
Technology
All our engineers are proficient in 3D modeling and use of SolidworksTM software. We
use computer-aided design (CAD) and rapid prototyping to accelerate development
cycles. In 2013 we finalized implementation of a new Microsoft Dynamics Enterprise
Resource Planning system that greatly improved organizational efficiency.
Our recent move to our new facility provided a perfect opportunity to modernize
our equipment and to invest in a state-of-the-art pump test room and R&D lab that
significantly enhance our development capabilities.
With our strong engineering team and our new manufacturing facility, we are
looking forward to supporting your current and future pump needs.
01/2015
PRODUCT GUIDE 2015
|
Jeff Sadler, Chief Product Engineer
Jeff joined WATERAX as Chief Product Engineer and he is leading our pump development initiatives. He
brings with him over 20 years of industry experience. Before joining the organization, Jeff spent the last
15 years at Hale Products Inc. and spent another 5 years prior with National Foam (Fire Truck Division).
All OEM’s who have worked with Jeff in the past know that he delivers first class customer support. His drive
and know-how have led to successful project implementations with truck OEM’s, fire departments, and fire
boat manufacturers.
Norith Tan, Lead Product Engineer
Norith has been with the company since 2005 and possesses an in-depth knowledge of every WATERAX
product. As a mechanical engineer, he has developed a solid expertise in design, combustion engines, powertrain,
and fluid dynamics. Norith’s passion is to create solutions to the real world challenges that firefighters face
every day and to delight them with exceptional products.
Rabih Bouyakdan, Product Engineer
Rabih has been with the team since 2012 and brings mechanical design expertise. As a mechanical engineer he
is responsible for the development of the WATERAX components used by OEM’s for their vehicle mounted
applications. Rabih is continuously looking for new ways to improve WATERAX design with the greatest and
latest SolidworksTM has to offer.
Jonathan Bousquet, Production Engineer
Jonathan joined the WATERAX team in 2010. As a mechanical engineer he is responsible for establishing
and improving our manufacturing and assembly processes. In short, he is the bridge between the development
team and the production. He ensures that we are manufacturing at the right cost and that our products meet
or exceed our stringent quality standards.
Steve Bisson, Production Manager
Steve has been with the company since 1994. He has an Aerospace machining degree and he is familiar
with Six SigmaTM and Lean ManufacturingTM methodologies. As Production Manager, he is responsible for the
planning and the production of all WATERAX products. With a solid background in metrology he is also in
charge of our quality control.
01/2015
49
50
PRODUCT GUIDE 2015
|
THE WATERAX SALES TEAM
Marcello Iacovella
VP of Sales and Business Development
Marcello joined the Company under WAJAX Manufacturing in 1995 and pursued a strategic roadmap
within the organization which led him to grow on the sales and marketing side of the business. Being
responsible for all sales and business development, including international, Marcello’s aim is to ensure
that customer needs are matched with targeted WATERAX solutions.
Chris Efta, National Sales Manager
Chris joined the WATERAX team as our USA National Sales Manager bringing with him the keys to
success within the fire industry. With over a decade of regional and professional sales experience, he
will be at the helm of the USA WATERAX sales team charting a course to deliver wide-ranging water
handling solutions. From early on, Chris’s passion has been and always will be the fire industry. Those who
worked with him can easily say his passion to provide excellent service is second to none.
Marvin Johns, Regional Sales Manager
Marvin is our South Central USA Regional Sales Manager, focusing WATERAX OEM and Dealers
accounts. He holds an Engineering and Business degree from Oklahoma State University. Aside from
his proven track record in OEM sales, Marvin brings to WATERAX a wealth of knowledge in product
development. The OEMs and Dealers who have worked with Marvin know that he is committed to serving
the fire community with professionalism and great care.
Mario Janson, Regional Sales Manager
Mario is responsible for all WATERAX key accounts in Eastern Canada. Having spent 10 years in the
Royal Canadian Navy as a Marine Engineering Technician, Mario acquired expertise in many types of
systems from steam propulsion to gas turbine and all auxiliary including LP, HP air. Although his background
is outside the fire industry, he’s a natural when it comes to ‘moving water’.
Mike Guterson, Regional Sales Manager
Mike is a seasoned veteran of the WATERAX team having joined WAJAX in the mid -1970s. Based
in Edmonton, Alberta, Mike focuses on providing comprehensive water handling expertise to our North
Western Canadian customer base, including our Prairie Provinces. In addition to overseeing our branch
activities, over the years Mike has come to forge very strong relationships with our customers given his
dedication and passion servicing the fire and industrial community.
01/2015
PRODUCT GUIDE 2015
|
TERMS AND CONDITIONS OF SALE
Order by Phone, Fax, Mail or E-Mail
WATERAX is striving to make ordering as simple as possible.
A toll free phone call to your local sales representative is all it
requires. When you call, you’ll speak to a highly trained and experienced sales representative who will quickly and accurately process
your order right over the phone. We will gladly process all orders
faxed, mailed or e-mailed.
Special Orders
We regularly supply items not shown in this catalogue. Please contact, fax or e-mail us a detailed description of your product needs.
Include quantities, brand names and other relevant information.
Orders for non-standard items are to be considered non-cancellable
and non-returnable.
International Sales
No matter where you are, WATERAX’s international sales
representatives can promptly process and ship orders to you. Our
extensive experience with export orders facilitates our ability to
efficiently answer your needs.
Prices
All prices are subject to change without notice. Feel free to call,
fax, e-mail or write to our sales personnel for current pricing information. All prices are FOB WATERAX’s warehouse/shipping point
(Incoterms 2000 revision) unless specifically quoted otherwise.
International Sale of Goods Convention
Please note that we expressly exclude the application of the
United Nations Convention on Contracts for the International Sale
of Goods, whose terms therefore do not apply to any sales made
to you by us.
Payment Terms
Net 30 days, subject to credit approval. Past due amounts
are subject to late payment charge of 1.5% per 30 days
(being 18% on an annual basis), or service charge at the maximum rate allowed by applicable state or provincial law. Charges
(including reasonable solicitor and other out of pocket costs)
incurred in the collection of invoices owed will be the sole
responsibility of the buyer.
Minimum Charge
We will be pleased to accept all orders. Due to the cost of handling
an order, a $45.00 service charge, plus any applicable taxes and/or
transportation charges, will apply to all orders of less than $250.00.
The minimum order will be waived if merchandise is purchased on
credit card.
01/2015
Credit Card Payment
WATERAX accepts payment by credit card (Visa or MasterCard)
up to a maximum of $25,000 per order. A surcharge of 3.5% will
apply to any credit card charge over $25,000. Maximum amount
per credit card transaction is $50,000.
Delivery
We constantly strive to maintain an extensive inventory to service
your needs. Every effort will be made to ship in a timely manner.
Notwithstanding anything to the contrary set forth in any purchase
order or distributor agreement, passage of title and risk of loss will
transfer to the buyer from WATERAX upon shipment from any
designated WATERAX warehouse or supplier location, unless
otherwise specifically agreed upon by WATERAX and the buyer
in writing for a specific shipment (in which case such exception
only applies to the particular shipment in question and not any
subsequent shipments).
Shipments will be made freight prepaid with shipping and freight
charges added to the invoice unless buyer freight account number
is provided. We may make partial shipments and each shipment
may be treated separately for purposes of invoicing. Our count and
weight taken at the shipping point shall govern. Delivery schedules
are approximate and not guaranteed. We assume no responsibility
for any delays in delivery.
Packaging and Handling Fee
WATERAX will add the cost of packaging and handling, with the
minimum charge of $5.00 for each order received.
Shortages or Damaged Merchandise
Any shortage, damage or error in shipment should be reported to us
immediately upon receipt of good and at the latest within 10 days
after delivery. All packages should be carefully inspected for visible
damage prior to acceptance from the carrier and delivery refused or
damage noted when signing for receipt of packages.
Returned Goods
Please contact our customer service department with full details
concerning the return of any goods and the issuance of a Return
Goods Authorization number (RGA). Material returned for reasons
other than defective replacement will carry a handling and restocking charge equal to 20% of the invoice price of such merchandise.
Material must be in new and original condition subject to inspection, and returned freight prepaid.
Note: all special orders, being non-stocked items purchased on
special order are to be considered non-cancellable and nonreturnable. Such sales are therefore final.
51
52
PRODUCT GUIDE 2015
|
WATERAX LIMITED WARRANTY
WHEREAS subject to the following general and specific terms and conditions, WATERAX Inc. (the “Seller”) hereby warrants to the original
purchaser of the products from WATERAX, (the “Purchaser”) that its products, including any pump parts products manufactured by WATERAX
(the “Products”) sold under Seller’s brands will be free of defects in material and workmanship for the applicable Warranty Period (as set out in
full at www.waterax.com/eng/warranty).
Product
Warranty Period
Coverage
4-Stroke Powered Pumps
Two (2) Years
Limited
2-Stroke Powered Pumps
Earlier of One (1) Year or
One hundred (100) run hours
Limited
Backpack Pumps
One (1) Year
Limited
Skid Units
One (1) Year
Limited
Control Panels, Electronics, Manifolds
One (1) Year
Limited
Genuine Parts
Ninety (90) Days
Limited
1. Limitations, exclusions and other terms and conditions applicable for all Products:
a. The Warranty shall be voided upon the occurrence of any of the following events: (a) the Product is used for an application, with products or in
a manner other than the application, products and manner for which such Product is designed and intended; (b) the Product is subjected to a
use, service, condition or environment other than a use, service, condition or environment for which such Product is designed and intended;
(c) the Product is not properly installed by the Purchaser or its agent or representative; (d) the Product is not properly tested and maintained in
accordance with Seller’s product manuals and supplemental instructions and guidelines, applicable industry standards and guidelines, and
applicable legal and regulatory requirements; (e) the Product is altered, modified, serviced (with the exception of routine maintenance
performed in accordance with the Seller’s product manuals and supplemental instructions as set out in full at www.waterax.com/eng/warranty,
and industry accepted standards and guidelines), or repaired by a person other than the Seller or a person authorized by the Seller to make
such alteration or modification or perform such service or repair; (f) the Seller is not paid the full amount of the purchase price for the
Product when due; (g) any bad faith invocation of a warranty claim or breach of a purchase agreement by the Purchaser.
b. The following are excluded from Warranty coverage: (a) non-defective parts worn, exhausted or consumed through normal usage of the
Product; (b) any consumable parts normally subject to routine replacement, including but not limited to pump packing, O-rings, gaskets,
intake screens, anodes or filters; (c) routine maintenance as specified and in accordance with the Seller’s product manuals and supplemental
instructions and guidelines as set out in full at www.waterax.com/eng/warranty; (d) failure due to compliance with a specification or
design provided or required by Purchaser; (e) failure due to improper operation, excess pressure, excess voltage, abuse, misuse, negligence
or accidents or other similar causes; (f) failure due to operator error; (g) damage during or after shipment and failure attributable thereto
or resulting there from; (h) failure attributable to or resulting from the failure or substandard, inadequate or improper performance of any
part, component or equipment not supplied by the Seller; (i) failure attributable to or resulting from the failure or substandard, inadequate
or improper performance of any third party part, component, product or equipment, whether or not combined, packaged, incorporated,
installed or used with a Seller brand part, component, product or equipment.
2. Claim Procedure. The claim procedure applicable under this warranty, including any applicable notice and documentation requirements, are set
out in full at www.waterax.com/eng/warranty and constitute an essential term of this Warranty.
3. Repaired and Replacement Product. If requested to do so by the Purchaser the Seller may, at its sole option and in its sole discretion, supply
a replacement Product or part to the Purchaser prior to making a final determination as to whether Warranty Coverage is available.
If the Seller ultimately determines that no Warranty Coverage is available for a Product claimed to be defective, the Purchaser shall have the
option of either (a) having the Product returned to it freight collect without repair or replacement; or (b) if Seller determines that the Product is
repairable, have the Product repaired by Seller or another party designated by it on a time and materials basis at Seller’s then current standard
charges for non-warranty repairs and then returned to Purchaser freight collect. The Seller reserves the right to use reconditioned parts for
Warranty repairs and to use reconditioned Products for Warranty replacements. Repaired Product and replacement Product shall be warranted
only for the remainder of the original Warranty Period.
4. Limitation of Liability: SELLER’S WARRANTY AS SET FORTH HEREIN IS SELLER’S SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ALL WARRANTIES OF MERCHANTABILITY, QUALITY, COURSE OF
DEALING, USAGE OF TRADE, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. THE RIGHTS AND REMEDIES SET FORTH HEREIN
ARE THE SOLE AND EXCLUSIVE RIGHTS AND REMEDIES AGAINST SELLER, EXCEPT FOR THE SPECIFIC LIABILITIES AND OBLIGATIONS PROVIDED
HEREIN, SELLER SHALL HAVE NO LIABILITY OR OBLIGATION WITH RESPECT TO ANY PRODUCT CLAIMED TO BE DEFECTIVE IN ANY MANNER.
WATERAX Inc. 6635 Henri-Bourassa W., Montreal, QC H4R 1E1 • www.waterax.com
01/2015
WATERAX Inc.
6635 Henri-Bourassa W.
Montreal, QC H4R 1E1
TF 855-616-1818
T 514-637-1818
F 514-637-3985
[email protected]
www.waterax.com
Distributed by: