By A-1 Auto Upholstery Inc.

By A-1 Auto Upholstery Inc.
Proper air distribution is important for effective temperature
control in the transportation industry. The A-1 Auto Upholstery Inc.
SINGLE FINGER AIR DUCT SYSTEM evenly distributes the air output
from the refrigeration unit. All encompassing, the A-1 Auto
Upholstery Inc. system of ADAPTOR, CHUTE BRACE and CHUTE,
were developed to prevent air loss... which would otherwise cause
the refrigeration unit to short cycle. The combination of ADAPTOR,
CHUTE BRACE and CHUTE, directs the air flow down the length of
the trailer more effectively, assuring even distribution of
temperature controlled air throughout the trailer.
With a insulated trailers capacity to reach temperatures of -30 to 180 degrees. polyethylene
becomes a perfect component choice. Good temperature resistant qualities for
both hot and cold extremes on the inside of insulated trailers assures
our customers of consistent performance.
The results of air buffeting or the stress of constant vibration
from the road are not a factor when polyethylene is utilized
Stress is not transferred to the mounting hardware or the ceiling material
on which the duct is mounted. This reduces the damage no only to the
trailer... but to the entire
Being an inert material which is
safe for use in a sterile environment,
polyethylene does not promote the growth of
undesirable elements such as fungus and
bacteria. Steam cleaning of the chute with ease
further assures a safe and sterile environment.
SINGLE FINGER AIR DUCT SYSTEM
With a high strength to weight ratio, the integration of polyethylene
is important in both fuel savings and damage control. Because of
these properties, polyethylene will not break when struck in a cold
state, and will not dent or bend permanently when struck during the
loading procedure.
ADAPTER
CHUTE BRACE
CHUTE IS TAPERED TO
MINIMIZE FORKLIFT DAMAGE AT
BACK OF TRAILER
CHUTE
USES
MINIMUM
SPACE
REFRIGERATION UNIT
CHUTE IS CEILING
MOUNTED
NOT ATTACHED TO UNIT
FOR EASE OF MAINTENANCE
MESH SHOWN ACTUAL SIZE
This is how the finished ceiling
will look when completed
ADAPTOR
BRACE
CHUTE
jPOLYETHYLENE
jUNBREAKABLE
jREADY TO MOUNT
jFOOD GRADE
jQUICK INTALLATION
jLIQUID DRAINAGE
jPOLYETHYLENE
jUNBREAKABLE
jTENSION CHUTE
jCOST CONTROL
jSMOOTH TRANSITION
jEVEN COOLING
jRAPID COOL DOWN
jDAMAGE CONTROL
jADHESIVE REPAIRS
jEASY CLEAN
jGROMMETED
jLIGHTWEIGHT
MODEL
MATERIAL
38FT
48FT
53FT
YES
PVC SOLID
CHUTE
LENGHTS
POLY VINYL CHLORIDE
PVC MESH
POLY VINYL CHLORIDE
YES
TRANSITION*
*BENEFITS
PVC SOLID /PVC MESH
30%/70%
jSTRONGER AIR FLOW TO REAR
TRAILER
THERMO KING
CARRIER
jSBIII
jSBII
jSB200
jSB300
jXT
jXTC SERIES
YES
jALL AROUND BETTER AIR FLOW
28%/72%