Calving/Trimming Chute - Hi-Hog
Transcription
Calving/Trimming Chute - Hi-Hog
Calving/Trimming Chute Maximize accessibility Item Number 125 The versatile calving chute is very popular with vet clinics, 4-H’ers, and ranchers. Whether you’re calving heifers, grooming show cattle, or performing general treatments such as preg tests, semen checks, embryo transfers, C-Sections, starting calves, milking out cows, treating utters, or treating feet. The calving chute includes all the core features of our larger calving pen. Like the calving pen the calving chute provides full access to both sides of your animal. The included connectors make it easy to integrate this chute with existing penning. Many ranchers locate the calving chute where they can easily lead an animal such as in an existing alley way. 1. The calving chute comes with our rugged self-catch automatic head gate. This head gate is based on the one found on our Parallel Axis Squeeze Chute and is identical to the head gate on our calving pen / maternity pen. 4. The head gate has three adjustments on each side at both the top and the bottom. This adjustability makes this a very versatile chute capable of holding new born calves right up to mature bulls. 5. If you are preparing unbroken livestock for show you will appreciate the addition of HiHog’s heavy duty head tie-up bar. 6. The chute includes a solid reinforced steel checker plate floor for superior durability. 7. The floor includes heavy traction bars welded in two directions for livestock stability. 8. Because the animal is standing on the floor they can’t run away with the chute. 9. Ratchets in the rear of the calving chute floor allow the 66″ high side split panels to be safely squeezed together to hold your animal centered in the chute. 2. The self-catch automatic head gate sets quickly with a simple chain set. As long as the chain is set to the correct width you should never miss an animal. 10. The provided tail chain can be latched across the rear of the calving chute to hold your cow secure. 3. The head gate opens full width in and out to avoid hip-lock 11. The chute includes four independent split panels hinged at the head gate. Toll Free 1-800-661-7002 May 2013 | Direct 1-403-280-8300 | 12. The upper and lower split panels can be latched together to act as one side panel. 13. Swing the bottom panel out on either side of the chute to give access for a calf to get started on the cow 14. Swing all the side panels out and insert the grooming posts in one of the two receivers on each side of the chute floor to have full access to your livestock for unrestricted trimming and grooming. 15. There are enormous stresses where the head gate is attached to the steel floor which is why Hi-Hog has extended braces to provide additional durability. 16. The calving chute comes with connectors on all four corners of the chute so you can connect with any of Hi-Hogs panels. This makes it possible to easily add panels to make a calving pen or to integrate this item in with a calving barn penning. 17. Add a palpation cage to the back and this chute makes an inexpensive starter squeeze chute. [email protected] | www.hi-hog.com
Similar documents
Hydraulic Squeeze Chute - Hi-Hog
Hydraulic Squeeze Chute Options Sternum Bar, Item 1554 An optional Sternum Bar or Brisket Bar, will inhibit livestock from dropping down in the cattle squeeze chute. The sternum bar pins into two b...
More information