LEADING ANALYTICAL INSTRUMENTATION

Transcription

LEADING ANALYTICAL
INSTRUMENTATION
LABORATORY INSTRUMENTATION
PROCESS SOLUTIONS
INSTALLATION
SUPPORT
www.mep.net.au
SERVICE
Metrohm
Anton Paar
Analytik Jena
DropSens
Metrohm
Applikon
Metrohm
Autolab
Metrohm
NIRs
Retsch
Retsch
Technology
Ion Analysis
Titration (Potentiometric, Thermometric)
Automation
Tiamo Software
tiBase Data Management
Touch Control
Karl Fischer Titration
Coulometer
pH, Ion, Conductivity Meters
Electrodes (pH, Conductivity, Redox, ISE)
Ion Chromatography
UV-Vis Detection
Amperometric Detection
Separation Columns
Combustion IC
4
5
6
6
6
7
7
8
9
10
10
10
11
11
Electrochemistry
Trace Analysis, Voltammetry
Cyclic Voltammetry Stripping
Standardised Stability Measurement
Potentiostats, Galvanostats
Screen-printed Electrodes
CONTENT
Spectroscopy
ICP MS
Atomic Absorption
High-Res ICP OES
High Res CS AAS
SUM Parameters
12
12
12
13
13
AOX/TX
TOC/TNb
UV-Vis
Elemental Analysis
Titration
ISE
VA Heavy Metal
Colorimetry
Total Organic Carbon TOC
Turnkey Solutions
Ambient Air Analysis (continuous)
C,N,S,Cl in Solids
14
14
14
14
15
15
16
Particle Characteristics
Density and Sound Sensors
Beverage Analysers
Inline Viscometers
Sample Preparation
Density Meters (benchtop, handheld)
18
Beverage Alcohol Measurement 19
CO2 /O219
Refractometry
20
Polarimetry
20
Material Testing
21
21
22
22
22
23
23
23
23
26
NIR for the Laboratory and Process Lines 27
Raman Spectroscopy
27
Sieve Analysis
Size and Shape (dynamic image)
Density and Concentration
26
Near-Infrared Spectroscopy
Process Measuring Solutions
17
17
17
25
25
UV-Vis Spectroscopy
Online Process Ion Analysis
Rheology
Viscometry
Nanostructure Analysis
Zeta Potential
Surface Mechanical Properties
Fuel and Bitumen Testing
Flash-Point (Pensky-Martens)
Penetration
Automatic Distillation
24
24
24
24
Milling
Grinding
Assisting
28
29
30
30
31
Microwave Chemistry
Microwave Digestion
Microwave Synthesis
32
33
Service
MEP Service Packages
MEPCare™
Seminars, Workshops, Training
Application Notes, Publications
Newsletters
34
35
36
36
36
Laboratory Service
Application Testing
Application Development
Applications and Methods Overview
37
37
38
MEP Instruments
MEP is a joint venture company of Metrohm and Anton Paar set up to serve the scientific
industry in Australia and New Zealand with first class products and services.
Represented in all major cities we aim to exceed your expectations when it comes to
instrument quality, technical advice and strong after sales support. MEP is proud to represent many world-leading companies and their technologies.
Metrohm
Metrohm is a worldwide leading manufacturer of precision instruments for chemical analysis. In the
field of electrochemical ion analysis Metrohm has been the unchallenged world number one for many
years. Metrohm is the only manufacturer with a sole focus on ion analysis from titration to pH, from ion
chromatography to voltammetry.
Metrohm Autolab
With a strong background and in-depth knowledge in electrochemistry Metrohm-Autolab’s mission is to
serve the research community by supplying modern, affordable potentiostats/galvanostats, software and
accessories.
Metrohm Applikon
Metrohm Applikon delivers sophisticated solutions for at-line and on-line wet chemical analysis, including
total organic carbon, to measure ion concentrations in various processes, using techniques such as
colorimetry, ISE, standard addition, titration and voltammetric analysis.
Metrohm NIRSystems
More than 50 years’ spectroscopy experience with more than 50 patents – that is Metrohm NIRSystems.
Our enlarged portfolio of NIRS laboratory and process spectrometers as well as our ready-to-analyse
Raman spectrometers in smartphone size let you experience the lightness of measuring. We offer you an
unparalleled accuracy, even for intricate samples. Discover our complementary spectroscopy families, NIRS
and Raman.
Anton Paar
Anton Paar GmbH produces high-end measuring laboratory and process instruments for industry and
research. With its innovative solutions in measurements of density, concentration and CO2 and in the field
of rheometry Anton Paar has secured its leading position worldwide. Petroleum, fuel and bitumen testing
solutions and highly sophisticated nano-scale surface mechanical properties testing instruments are also
included in the group’s impressive portfolio.
Analytik Jena
Germany-based Analytik Jena has a long tradition in developing high-performance precision analytical
systems dating back to the inventions made by Ernst Abbe and Carl Zeiss. They have become one of the
most innovative manufacturers worldwide. Analyik Jena excels in the fields of optical and mass spectroscopy,
sum parameters and elemental analysis.
Retsch
Since 1915 Retsch has developed consistently within the fields of solids homogenization and sieve analysis.
Its unparalleled product lines have won Retsch the position of world leader in the market of milling and
sieving equipment.
Retsch Technology
Based on the experience and know-how of the parent company Retsch GmbH and in cooperation with
partners Jenoptik and Horiba, Retsch Technologies offer highly innovative instruments for particle size and
shape analysis.
DropSens
DropSens is an innovative technology-based firm specialised in the design and manufacture of instruments
and screen-printed electrodes, based on thick-film hybrid technology for electrochemistry research.
3
Ion Analysis
TITRATION AT ITS BEST
Intuitive, intelligent, sophisticated
Titrando – the flagship of titration
Titration systems à la carte
The 906/907 can perform SET, MET, DET, KFT and STAT
titrations, as well as Ion Concentration Measurement.
A sophisticated control algorithm, combined with the
increased volume resolution of the Intelligent Exchange Units,
guarantees highly precise results.
Touch control or mouse click?
Whether you operate the Titrando with touch control or via
PC and mouse, appearance and operation are practically
identical. The system’s operator guidance is exemplary.
Intelligent dosing
The Titrando automatically reads from its chip all the data
(type of reagent, titre, last titre determination and much
more) that it needs to carry out the titration properly.
Thermometric
Titration
916 Ti-Touch
reduced to the max!
Thermometric titration is a
very versatile determination
method and an ideal
complement to potentiometric
titration. Suitable for any
reaction that produces a
sufficiently large temperature
change in the sample solution.
The 916 Ti-Touch comes with
a complete package system
for Oil, Food/Wine and
Salt/Chloride analysis.
•Ultrafast
• Paperless pdf reports
• One sensor only for all
• Direct connection to
applications
4
• Maximum system integration,
in-built colour touch-pad screen
• Uses patented Dosino
technology
intranet and LIMS
www.mep.net.au
Ion Analysis
AUTOMATION AT THE HIGHEST LEVEL
From titration to complex liquid handling
Automate your liquid handling tasks
The efficient Robotic USB Sample Processor XL carries out
complex laboratory automation tasks in combination with
a Titrando. When used with the revolutionary 786 Swing
Heads its capacity can be increased, e.g. up to 100 samples
of 75 mL each.
786 Swing Heads are true masters of precision
• They move pipetting tips to microtitre plates with millimetre
accuracy or take up disposable filters
• High sample volumes
• High numbers of samples
• Working in parallel
• Automated liquid handling
• Automated pipetting, diluting
• Karl Fischer automation
• Automatic sample preparation
• Up to two external titration stations
Customised automation systems
Space saving automation
All-in-one 855 Titrosampler
For large sample series
Get correct and dependable results faster!
The 855 Robotic Titrosampler is an automated titrator
that combines the highest quality standards in titration:
• 40% less lab space
The 898 XYZ Sample Changer provides automation
to the analysis of large sample series with utmost
precision. Plenty of space for 82 samples and the 898’s
high operating speed mean that you save considerable
amounts of time in routine analysis. • Unique and outstanding
• Controlled by Tiamo, the leading titration software
• Easy to handle and user friendly
• Rack change during operation
• Based on the Titrando technology
• With top performance automation
• Robust and reliable
• Large sample numbers
MEP Instruments • A company of Metrohm and Anton Paar
5
Ion Analysis
TIAMO™
Unparalleled titration software
tiamo™ – Titration and more
tiamo™ is the result of Metrohm’s largest and
most modern software project for ion analysis.
tiamo™ is the most powerful control and database
software for titrators, dosing devices and sample
changers, allowing complete laboratory automation.
tiamo™ comes in three base versions for every
requirement: Light, Full and Multi (Client Server)
Features of Full and Multi:
900 Touch Control
• Sample data export and import
• Fully compliant to FDA 21 CFR Part 11
The operating unit for Titrando’s
pH and Conductivity modules
and Sample processors.
• Parallel titration
• Direct connection to intranet
• Result, sensor, titrant monitoring
• Unlimited number of instruments connected
• Third party instruments can be connected, e.g.
density meters
and LIMS
• Touch sensitive, high resolution
display
• Methods, results stored on
tiBase – Intelligent data
management for titration
The new datalogging software
from Metrohm manages all of
your data directly from the 900
Touch Control, Titrino Plus and
the new 915–916 Ti-Touch
• Direct import of data
• Determination reprocessing
system as well as ability to
and storage of titration
store on USB stick or network
curves and all instrument
• PDF generator
• Favourite methods can be
linked to an icon on the
screen for ease of use
configuration data.
• Data export to LIMS
• Can be supplied in a client
server version
• Fully compliant to FDA 21
CFR Part 11
6
www.mep.net.au
Ion Analysis
KARL FISCHER MOISTURE ANALYSIS
Moisture determination from ppm to 100%
915 KF Ti-Touch
KF titration reduced
to the max!
The 915 KF Ti-Touch is the Karl
Fischer version of Metrohm’s standalone titrator for routine analysis.
In this titrator the burette, stirrer,
dosing system and operation module
are cased in a single, compact
unit. This is not only handy but
also saves valuable benchspace.
• Contact-free reagent exchange
• USB Interface for printer, USB stick
or barcode reader
• Direct access to intranet and LIMS
• Paperless pdf reports
• Colour touch-pad screen control
with data storage
Karl Fischer automation and software solutions
KF automation system 851
with 874 Oven Sample Processor
The 851 KF Coulometer is perfect for large sample
throughput. Together with the 874 Oven Sample
Processor, it combines exceptionally well with the
proven reliability of Metrohm sample changers.
Complete package for water determinations
890 KF Titrando for titration with the proven
intelligence of the Titrando family.
• Packages with Touch Control
or tiamo™ software control
• Intelligent dosing elements
• Client/server database thanks to tiamo™
• Direct connection to intranet and LIMS
• FDA 21 CFR Part 11 compliant
• 20,000 pulses per cylinder volume
7
Ion Analysis
pH, ION AND CONDUCTIVITY METERS
Precision tools for everyday
Metrohm pH and ion meters
designed for field, laboratory
and plant
«Two-in-one» – for indoors and
outdoors
These new Metrohm meters are «two in one»:
precision instruments for measurements in
the laboratory and robust companions for
mobile use in the field and at the process line.
Optional battery operation makes the new
meters independent of a power grid. They
can even be recharged on the road on the
cigarette lighter with the use of an adapter.
Measuring on two channels at once
Parallel measurement of pH and conductivity
with the 914 pH/Conductometer, parallel
recording of two pH values with the 913 pH
Meter. Moreover, both versions indicate the
temperature(s) of the sample(s).
912 Conductometer, 913 pH Meter, 914 pH/Conductometer
German
French
Maintenance and Care
of Metrohm Electrodes
A.740.0001
English
Spanish
Metrosensor electrodes
Portuguese
Italian
Metrohm AG
CH-9101 Herisau, Switzerland
www.metrohm.com
©Copyright 2007
Precision is not accidental, but brought about
by design!
The 914 pH/Conductometer shows you at a glance the pH
value, the conductivity, and two temperature values. As a result
of the two separate measuring inputs, conductivity and pH value
can be measured in parallel, even in the same beaker.
With the 913 pH Meter, you can measure two pH values
and two temperature values simultaneously. Two
separate measuring inputs are available here as well.
The 912 Conductometer is equipped with a measuring
input for conductivity, TDS, salinity, and temperature.
Electrode selection and maintenance
Maintenance and Care
The ABC of electrode care – get precise results and a long
lifetime of your electrodes. Order your free DVD copy!
The Metrosensor Catalogue guides you to the right
electrode for your applicaton, explains how a Metrosensor
is made and introduces the theoretical fundamentals. It is
free to order. Call us.
All versions of the new meters are equipped
with a large colour display.
8
www.mep.net.au
Ion Analysis
pH, CONDUCTIVITY, REDOX, ION SELECTIVE ELECTRODES
Unsurpassed Swiss quality and service life
Application
Universal
Water
Waste water
Soil samples
Agricultural,
cultivation of
plants
Food,
stimulants
Pharma industry
Biology
Cosmetics
Detergents,
surfactants
Leather, paper,
textile industry
Paints,
lacquers,
solvents
Electroplating,
metal
processing
Special
applications
Beverages
Specifics
Electrode
Standard laboratory, various samples, pH
0…14, T = 0…100 °C
Unitrode
Demineralised, drinking and sea water,
weakly buffered solutions
Aquatrode Plus
General
Unitrode
Sulphide-containing waste water
Profitrode
Surface measurement or aqueous suspensions Flat Membrane
Culture media, small volume samples
Biotrode
Fertilisers
Unitrode
Liquid manure
Profitrode
Nutrient solutions
Viscotrode
Protein-containing solutions
Porotrode
General
Unitrode
Sensors for all applications
Metrohm is a leading manufacturer of a variety of
sensors. From pH, ion-selective electrodes, Redox,
photometric, thermometric and conductometric,
Metrohm offers a full range of sensors for practically
every application.
• The Metrosensor Long Life reference system for pH
and combined metal probes allows the system to
last longer and to reduce blockage of the electrode
diaphragm.
• Full range of analogue and digital interface
Protein-containing food, beer
Porotrode
Penetration measurement
(dough, cheese, meat)
Spearhead
Drinking water
Aquatrode Plus
connected to non-Metrohm systems. Request
Juices, wine, spirits
Unitrode
Creams, liquid formulations, medicinal syrup,
mouthwash, raw materials
the free adapter to take advantage of
Viscotrode
Dialysis solutions, urine
Unitrode
Gastric juice, serum, small volume samples
Biotrode
Infusion solutions
Aquatrode Plus
Porotrode
Shampoos, emulsions, shower gels, mouth
rinse, perfumes
Viscotrode
Make-up
Microelectrode
Skin (surface measurement)
Flat Membrane
General
Viscotrode
Samples with pH >10
Profitrode
Bleaching & dye baths
Profitrode
Dampening solutions (offset printing), glues
Unitrode
probes with the new iTrode and iConnect
• With the correct adapter Metrosensors can be
Metrohm electrodes.
• Quality Swiss Made products
ADAPTERS
for non-Metrohm
instruments
available
Leather, paper, textiles (surface measurement) Flat Membrane
Washing liquors
Viscotrode
Dye baths, ink, wood stain, lacquers
Profitrode
Dispersions, emulsions, resins, suspensions
Unitrode
Paint (surface)
Flat Membrane
Non-aqueous, polar solvents
Solvotrode
General
Profitrode
Acidic electroplating baths
Unitrode
Cutting oil emulsions
Viscotrode
Etching baths containing fluoride/hydrofluoric
acid
Sb Electrode
Concentrated acids
Profitrode
Photographic baths
Profitrode
Emulsions, suspensions, dispersions
Unitrode
Samples at pH >12
Unitrode
Temperature 50…80 °C
Unitrode
Temperature 80…100 °C
Unitrode
Ion-deficient solutions, weakly
buffered solutions
Unitrode
(Idrolyte)
Non-aqueous, polar solvents
Solvotrode
Penetration measurement
Spearhead
Porotrode
Small volume samples
Biotrode
Surface measurements
Flat Membrane
Wines, beers and soft drinks
Vinotrode
9
Ion Analysis
THE WHOLE WORLD OF ION CHROMATOGRAPHY
Compact intelligence for ion chromatography
940 Professional IC Vario
The amazing 940 Professional IC Vario system
stands for maximum flexibility combined with
most easy operation and perfect reliability.
930 Compact IC Flex
The outstanding 930 Compact IC Flex is
the ion chromatograph of choice for routine
analysis developed with a focus on the
requirements of contract laboratories and
QC laboratories in all kinds of industries.
Rugged design, perfect ease of use and
outstanding system reliability are key
features of the 930 Compact IC Flex.
Configure your personal IC
Metrohm’s online configurator for the
940 Professional IC Vario system and the
930 Compact IC Flex allows you to put
together your customized IC system.
UV-Vis detection
Amperometric detection
The 944 Professional UV-Vis Detector enables reliable and
accurate quantification of substances that absorb light in the
ultraviolet or visible range.
The 945 Amperometric Detector is designed for direct
current (DC), amperometric (PAD), highly flexible
integrated pulsed amperometric (flexIPAD)
or cyclic voltammetry (CV) modes.
Broad area of use
The flow path of Metrohm’s IC instruments is completely
metal-free. Thus, not only the standard anions and cations,
but also transition metal ions and various organic substances
can be detected without any problem. Even in complex
matrices, e.g. biological samples, good detection limits can be
achieved on the basis of the specific absorption properties of
many analytes.
10
Typical applications include the determination of inorganic
anions, such as cyanide, sulphide, nitrite, sulphite or iodide;
carbohydrates, such as mono-, di- and polysaccharides,
amino-sugars, sugar alcohols and sugar acids; and
organic compounds, such as phenols or vitamins.
www.mep.net.au
Ion Analysis
SEPARATION COLUMNS
Surpassing standards
The first intelligent ion chromatography
column generation in the world
“Insert and start”
When a Metrosep separation column is used in different
systems, it conveys all its information to the next IC system.
This results in complete traceability and GLP surveillance for
all the columns used, even on different IC instruments. This
greatly facilitates system validation.
Column selection for standard test methods
Meeting global standards in IC is now easy.
Metrohm columns are built and developed to meet
compliance requirements. Metrohm application chemists
remain at the forefront of science and research where new
simplified and enhanced methods are being developed.
• All column data is immediately available.
• Active monitoring of all important column functions
• Complete traceability of all column parameters
COMBUSTION IC
Analyse solids and viscous samples
Combustion IC is the modern combination of
hydropyrolysis and ion chromatography. With this
coupling, it is possible to analyse solids and highly
viscous samples fully automatically. In contrast
to previously employed methods, Analytik Jena’s
flame sensor technology in combination with
Metrohm’s liquid handling capabilities enables fully
automated analysis without time consuming method
development, internal standards, and manual steps.
Even the supply of sample is automatic.
Combustion IC at a glance:
• Fully automatic sample preparation for solids and
liquids during sample delivery and subsequent ion
chromatographic analysis
• Simultaneous determination of sulfur
and halogens
• Differentiated determination of the concentrations of
various halogens
• Material tests with regard to halogen-free products
(RoHS)
• High sample throughput
• High precision and accuracy
11
Ion Analysis
TRACE ANALYSIS WITH VOLTAMMETRY
The versatile all-rounder for research, teaching and industry
797 VA Computrace
894 Professional CVS
Analysis of heavy metals: total concentration…
For specific applications where the cost of AAS or
ICP is prohibitive, voltammetry can accomplish metal
analysis with equivalent or even higher sensitivities.
Only small quantities of reagents and pure nitrogen
are required.
Cyclic Voltammetry
Stripping (CVS)
… and speciation!
With voltammetry it is also possible to differentiate
between varying oxidation states of metal ions,
or between free and bound metal species. This
information can be used to assess biological availability
and toxicity of heavy metals, making voltammetry
an essential technique in environmental analysis.
High ion concentrations? No problem with VA!
Voltammetry is ideally suited for the analysis of:
• Water, waste water and sea water
• Salts and pure chemicals
• Electroplating baths
•Foodstuffs
The 894 Professional CVS
stands out for its unique
flexibility. Due to the system’s
entirely modular design, it can
be expanded and upgraded at
any time with additional units
such as dosing devices, pumps
and sample changers.
STANDARDISED STABILITY MEASUREMENT
Easy and automatic
Oxidative stability of fats and oils
The determination of the oxidation stability of edible oils and
fats is the classical application for the 892 Rancimat. The
“induction time” that is measured characterises the resistance
of oils and fats to oxidation. The term Oil Stability Index (OSI)
is also commonly used. The Rancimat method is incorporated
in standards such as AOCS Cd 12b-92 and ISO 6886. This
technique replaces the complicated Active Oxygen Method.
12
StabNet – Modern software for stability
measurement
StabNet is the modern and user-friendly software for carrying
out stability measurements and archiving the measurement
data. The characteristic features of StabNet are its ease of use
and flexibility.
www.mep.net.au
Electrochemistry
POTENTIOSTATS
Developed for electrochemists by electrochemists
Autolab NOVA software
Autolab potentiostats
The next-generation NOVA software package supports all
electrochemical measurement techniques, offering accuratelytimed sequences of commands and powerful data analysis
tools. NOVA is designed for multi-tasking and collaboration,
with automatic database storage of all measurements and
potentiostat settings.
Autolab potentiostats and galvanostats offer a range of
current outputs from 100 mA to 2 A and compliance voltages
from 10 V to 100 V. The new Multi Autolab can control up to
12 independent channels. The capabilities of Autolab PGSTAT’s
can be extended with additional modules, e.g.
• Electrochemical Impedance Spectroscopy
• pA current amplification for microelectrodes
• Bipotentiostat and sensor electrode array
• Ultra-fast (sub-μs) electrochemistry
• Current boosters (10 A & 20 A)
Innovative technology for miniaturised
electrochemistry
Portable dual- and multi-channel potentiostats
Screen-printed electrodes
• Voltammetric, amperometric or potentiometric measurements
•Disposable
• 18 electroanalytical methods
• Micro-volumes of sample
•
• Working electrodes of carbon, platinum, gold, carbon
Bluetooth™
connectivity
• Optional accessories (Flow-cells)
nanotubes and gold nanoparticles, etc.
• Dual sensors and customised chips
13
Process Analysis
PROCESS ANALYSIS
Laboratory analysis in the process environment
ADI 2045 Process Analyzer
Combining Metrohm’s knowledge in laboratory analysis and
Applikon’s experience in process control instrumentation,
the ADI 2045 can perform nearly every ON-line or AT-line wet
chemical analysis in the most difficult environments.
Its unique modular design makes it possible to adapt the
analyser to the specific needs of the application. Multi-parameter
and multi-stream analyses are easily implemented as well as
communication with other devices.
Titration
•Acid/Base
•Argentometric
•Colorimetric
•Complexometric
•Iodometric
• Karl Fischer
•Precipitative
•Redox
• Thermometric Titration
ISE Ion-Selective Electrodes
• Analysis of most common anions and cations.
Voltammetric Heavy Metal Analyser
• Analysis of heavy metals in highly ionic solutions
Differential Absorbance Colorimetry
• Analysing heavy metals in most demanding sample matrices.
Chemical species analysed on-line
Acetic Acid
Acidity
Acrylaldehyde
Alkalinity
Aluminium
Ammonia
Aniline
Anion-ActiveDetergent
Arsenic
Ascorbic Acid
Bayer Liquor
Blended Acid
Boric Acid
Brine (Ca & Mg)
14
Bromide
Calcium
Carbonate
Caustic
Chlorate
Chloride
Chlorine, Free/
Total
Chlorine dioxide
Chromium
Citric Acid
Cobalt
ChemicalOxygen-Demand
Copper
Cyanide, Free/
Total/WAD
Dithionite
EDTA
Fatty Acid
Fluoride
Formaldehyde
Glucose
Glycerol
Heavy Metals
(Cd, Cu, Pb,
Zn, etc)
Hydrazine
Hydrochloric
Acid
Hydrofluoric
Acid
Hydroxylamine
Hypochlorite
Hypophosphite
Indigo
Iodide
Iron (II) & (III)
Lactic Acid
Leuco Indigo
Liquors: white,
green, black
Lime
Lithium
Magnesium
Manganese
Mercaptane
Mercury
Metaborate
Nickel
Nitrate
Nitrite
Nitric Acid
Nitrogen, Total
Oleum
P & M number
Peracetic Acid
Peroxide
Persulphate
Phenol
Phosphate
Phosphate, Total
Phosphoric Acid
Phthalic Acid
Pickling Bath
Solutions
Silica
Silver
Sodium
Sulphate
Sulphide
Sulphite
Sulphonic Acid
Sulphuric Acid
Surfactant
TBC
Tetrafluroborate
Thiocyanate
Tin
Titanium
TMAH
Urea
Water, Karl
Fischer
Zinc
www.mep.net.au
TOC
TOTAL ORGANIC CARBON ON-LINE
Monitoring organically bound carbon in water streams
ADI 7010
Reliable on-line TOC measurements
The ADI 7010 TOC Analyzer measures Total Organic Carbon
in liquid samples using the method of UV persulfate oxidation
with carbon dioxide detection by non-dispersive infrared. The
Analyzer can measure TOC in liquid samples ranging from
0-5 mg/L up to 0-50,000 mg/L and conforms to EPA, DIN,
CE, ASTM, NAMUR regulations and meets European ISO/CEN
guidelines.
Application of Total Organic Carbon
By monitoring TOC during their processes many industries
are able to save costs, by confirming a process is optimised
and operating efficiently. Monitoring TOC also helps ensure
wastewater is treated correctly, meeting consent requirements
before discharge to the environment or meeting organic load
limits for discharge to municipal treatment plants.
TOC monitoring is applied in many industries like:
Chemicals, Pharmaceuticals, Food & beverage, Automotive,
Oil & gas, Power & energy, Petrochemical, Pulp & paper,
Airports and Environmental monitoring.
Sample types: Waste water, Drinking water, Surface water,
Process control, Boiler feed water/condensate, Cooling water,
Run-off/storm water
MEP Instruments
Full Application Guarantee
TURNKEY SOLUTIONS
Economical and guaranteed
Monitoring continuous sample
streams maybe necessary and
more economical than lab solutions. Our Metrohm – Applikon
specialists have developed and
implemented numerous systems worldwide covering an
extensive range of applications
for the determination from
µg/L to g/L levels.
Sample preconditioning units
for liquids, solids and gases:
More often than not, samples need to be preconditioned
before they can be sent into the analyser.
• Filtration and settling (e.g. slurry)
• Extraction, stripping, distillation
• Cooling and heating
• Dilutions and reactors
• Grinding and dissolving (powder)
•Mixing
Construction Materials
MEP provides simple one sample preconditioning to complex
turnkey solutions including
shelter. Contact
our engineers to discuss
your needs.
• Stainless steel (SS316), hastelloys, teflon, Viton, PP etc.
Ingress protection
• IP65 and IP66
Shelters
• Cooling and/or heating
• Drainage of waste to sewage
• Service table, tap, sink etc.
•Lighting
• Power backup systems
15
Process Analysis
MONITOR FOR AEROSOLS AND GASES IN AMBIENT AIR
Environmental surveillance
Continuous Measurements of Aerosols in Sydney, NSW.
MARGA for autonomous operation
With MARGA, gas and aerosol composition of ambient air can be
measured simultaneously and continuously.
The whole MARGA system runs autonomously, generating
aerosol and gas concentrations every hour, only requiring user
intervention once per week to supply new solutions.
The sensitivity of the ion chromatographs is sufficient to reach
detection limits below 0.1 µg/m3 with an air sampling flow rate
of 1 m3/h.
The MARGA is available with 1 or 2 sample boxes, the latter
allowing simultaneous sampling of two different aerosol sizes,
for example PM 2.5 and PM 10.
• Continuous monitoring with hourly results
• Results on the composition of gases and aerosols
• Remote access and data transfer
• One week unattended operation
• Smart software with security and validation levels
• Quality assurance of the measurement with internal standard ion
chromatography
16
www.mep.net.au
Anton Paar Process
PROCESS MEASUREMENT SOLUTIONS
Continuous control of beverages and liquid chemicals
Inline and online beverage analysers
Process Density and
Sound Sensors
Anton Paar‘s series of density
and sound sensors are used for
the measurement of liquids,
aggressive liquids, liquids
with high temperatures or
whenever the highest accuracy
is needed. They continuously
measure density, concentration,
phase separation and product
identity to optimise production
processes and ensure a
consistently high quality of
product.
• The highest accuracy
• Robust measuring technology
• Safe use
• Small and compact
Inline Viscometer
This revolutionary viscometer
continuously and reliably
monitors the viscosity of
process liquids such as
suspensions, lubricants and
starch adhesives. The inline
viscometer is installed in
a pipe or tank and shows
the viscosity at process and
reference temperature in
24-hour operation.
First-class instruments for continuous, accurate and safe
measurement of important quality parameters such as °Brix, %
Diet concentration, CO2, alcohol, sugar inversion, extract, etc.
during the entire production process. Inline and online beverage
analyser models from Anton Paar – powerful, tried-and-tested
measuring procedure and user-friendly software.
Models include;
• Cobrix 5 for °Brix, % Diet, CO2, alcohol, original extract, real
extract, apparent extract, degree of fermentation and other
optional parameters
• Beer Monitor for alcohol, real and original extract and
optional CO2
• Wine Monitor for alcohol, extract and CO2 content of wine
• CO2 sensor: Highly accurate inline CO2 sensor for the continuous
monitoring and control of CO2 content during beverage
production.
• Consistent product quality
• Simple installation
• Determination range from
1 mPa.s to 50.000 mPa.s
• Not influenced by drops in
pressure or flow rate
• Constant results, even under
adverse flow conditions
17
Concentration
DENSITY AND CONCENTRATION
Measurements made easy: 0.001 to 0.000005 g/cm3 accuracy
It all started in 1967; Anton Paar produced the first digital
density meter with an oscillating U-Tube, marking a turning
point for density measurement and replacing hydrometers
and pycnometers. Today the 7th generation of DMA density
meters is being manufactured, while instruments of the first
generation are still operating in many laboratories.
DMA 4100 M, 4500 M & 5000 M
The DMA Generation M series enables the connection of new
Modular Extensions (ME) directly to the Master Instrument (M).
Anton Paar has developed modular extensions to analyse CO2,
O2, Turbidity, pH, Diet Strength and Alcohol in combination
with density.
• Accuracy range g/cm3: 0.0001 to 0.000005
• Automatic sample changers and built-in filling options
• Automatic filling check and video in selected models
• Patented reference oscillator for drift free measurement
and single point adjustment
• Built-in concentration tables and custom functions
DMA 35
Portable density meter
DMA 500
Stand-alone density meter
The four models of the
DMA 35 give you the density,
specific gravity, %-concentration of several parameters
including Baume, Brix and
Plato within seconds by simply
pressing the lever. The intrinsically safe Ex versions enable
safe testing of fuels and battery acid in the field.
The stand-alone DMA 500
density and concentration
meter provides results with an
accuracy of 0.001 g/cm3 at the
push of a button.
• Accuracy ± 0.001 g/cm3
18
• Temperature range 15˚C
to 40˚C
• Integrated battery for
mobile use
•FillingCheck™ and camera
image of measuring cell
www.mep.net.au
Concentration
BEVERAGE ALCOHOL, CARBONATION AND OXYGEN METERS
Setting industry standards
Beverage carbonation and
oxygen meters
The CarboQC, OxyQC and new combined
CboxQC are suitable for lab and at-line
beverage applications. With robust IP67
construction, patented CO2 measuring method
and modern O2 luminescence sensors the
new series is perfect for your measuring
requirements. Sampling direct from beverage
packages is possible with
PFD device.
PBA – Package Beverage
Analysers
Portable Alcohol Meter
for Distillates: Snap 50
Alex 500: Alcohol and
Extract Meter for Beer
Alcolyzer®
Beer, wine and spirits
Quality parameters, such as
Brix, Alcohol, Extract, pH,
Turbidity and colour, are
measured directly out of
the bottle or can, without
time-consuming sample
preparation. The beverage
analysis systems are more
reliable and quicker than
previous systems on the
market. Beverage analysis –
easy, quick, modular.
The portable alcohol meter
Snap 50 measures distillates
in all strengths within seconds: from pure distillates
to samples taken during
watering down to drinkable
strength and ready-to-drink
spirits. The alcohol meter
automatically compensates
the temperature influence
on the result and shows the
alcohol concentration with
an accuracy of 0.1 % v/v on
the large display.
Alex 500 is a compact instrument for the determination
of alcohol and extract content, calories, and the degree
of fermentation in beer.
The Alcolyzer® is the standard
instrument for alcohol measurement. Based on a patented
method for selective alcohol
analysis using NIR spectroscopy, the Alcolyzer® is easy to
use and delivers results within
minutes. The new Alcolyzer
ME measuring module makes
it possible to measure the
alcohol content of spirits,
wines and beers with a single
alcohol meter, just by selecting
the appropriate method.
• Alcohol accuracy 0.2 % v/v
• Density accuracy
0.001 g/cm³
A small unit with great
power.
19
Concentration
POLARIMETRY AND REFRACTOMETRY
A range of instruments suitable for quality control to research applications
A refractometer for every task
The new Abbemat series
Anton Paar launches a new range of Abbemat refractometers,
which embody four decades of technical know-how. Building
on the longstanding knowledge from Dr Kernchen, Anton Paar
continues the tradition of producing high-end refractometers
and presents three new product lines: the Performance line,
Performance Plus line and Heavy Duty line.
• Accuracy to ± 0.00002 nD
• Temperature range 10°C to 110°C
• Up to 8 wavelengths with the MW model
MCP 200/300/500
Polarimeters
The MCP series is the latest
generation of polarimeters
with full compliance with international standards (pharmacopeias, OIML, ASTM, Australian
Standard K157).
Modulyzer
Multiparameter
measurements
• Peltier temperature control
As an alternative to using a
number of single instruments,
Anton Paar now provides
a complete system for
measurement: the DMA
Generation M which can be
combined with:
• 100% ICUMSA compliance
• a high precision
• Resolution down to 0.0001°
with the Sucromat model
• Temperature range 15 to 45°C
refractometer RXA
• a MCP series polarimeter
• a colour measuring instrument
• a pH module and more.
20
www.mep.net.au
Material Testing
INTELLIGENCE IN RHEOLOGY AND VISCOSITY
Cutting-edge technology for research and development
MCRXX2 Modular Compact Rheometers
LOVIS microviscometer
The Lovis measures viscosity
of low viscous solutions in
small volumes that require
accuracy and repeatability
according to DIN 53015 and
ISO/DIN 12058.
• Peltier temperature control
+ 5˚C to 100˚C
• Sample volume 0.1 mL to
0.8 mL (1 mL to 3 mL w. ME)
• Range 0.3 to 10,000 mPa.s
• Optional combination of
density meter and sample
changer
SVM3000: Viscosity
and density in one
Anton Paar introduces the third generation of Modular
Compact Rheometers. More versatile than ever, the new
MCR series offers an open range of possibilities. This is how
Anton Paar defines future-proof rheometry: Whichever new
application opens up, MCR users can rely on the fact that they
are always covered. Whether in routine QC lines or high-end
R&D applications, the speed and precision of the systems’
dynamic EC motor and numerous features are always readily
available for convenient operation and reliable results.
The SVM3000, meeting ASTM
D7042, opens up a whole new
era in viscosity measurement.
Requiring a fraction of lab
space, the SVM is extremely
robust, very easy to use and
can be installed in minutes.
• Extensional rheology with SER and UXF fixtures
• Measures viscosity and
• DMTA with fixtures for solids, films and fibres
density
• Displays dynamic/kinematic
viscosity and density
• Temp. range of –56˚C to
105˚C
• TwinDriveTM Ready for Stress and Strain controlled rheology
• Choice of air bearing or ball bearing models
• TruRate™ and TruStrain™
• Largest range of accessories available
• Temperature range from –150˚C to 1600˚C
• Pressure range up to 1000 bar
• Rheo-microscopy (UV, SALS, SAXS, SANS)
• Starch Rheology
• Interfacial Rheology
• Powder Rheology
•Tribology
• Viscosity 0.2 to
20,000 mm2/s.
• Density 0.65 to 3 g/cm3
21
Material Testing
SURFACE MECHANICAL PROPERTIES
Indentation, scratch and tribology testing
Indentation, scratch and tribology
Multiple Indentation or Scratch testers along with 3D
confocal or AFM modules are installed together on the same,
compact platform. All measurement and imaging modules are
“synchronised” to each other, allowing complete automation and
control when performing measurements in the macro, micro and
nano scale. Anton Paar TriTec solutions provide configuration
flexibility to grow with all customer needs. Swiss made with over
30 years of experience.
• Indentation/hardness testers
• Scratch testers
•Tribometers
• Coating thickness measurements
NANOSTRUCTURE ANALYSIS
ZETA POTENTIAL
SAXSpace
Zeta Potential analysis on solid samples
The Small-Angle X-ray Scattering (SAXS) method generates
information about the morphology of a huge variety of
materials, ranging from proteins, nutrients and active
pharmaceuticals to polymers, fibres, paints and catalysts.
SAXSpace gives users both line and point collimation options,
with two beam lines connected to the same X-ray source.
Users can now analyse the overall nanostructure of a sample
up to 200 nm, as well as their crystal lattice at the atomic level
below nanometer size – by performing continuous SAXS and
WAXS measurements.
The SurPASS electrokinetic analyser is a state-of-the-art tool for
solid surface characterisation. This instrument is the culmination
of many years of experience with the streaming potential
technique at Anton Paar and our close cooperation with
universities and research institutes.
The well-engineered electrolyte circulation, integrated electronics
and the easy-to-use measuring cells provide a user-friendly
platform for advanced surface analysis. The myriad of measuring
cells allow a range of solid samples to be characterised, including
films, fibres, powders, flat sheet and hollow-fibre membranes,
ceramics, electronic wafers and textiles.
Modular nanostructure analysis
• TrueFocus – automatic system alignment
Advanced science for material testing
• Single source – multiple beam lines
• Maximum efficiency – high sample throughput
• Simultaneous small- and wide-angle measurements (SWAXS)
22
www.mep.net.au
Material Testing
FUEL AND BITUMEN TESTING
High-tech test equipment for the petrochemical industry
Flash-Point Pensky-Martens Method
PMA 5
In 1873 Berthold Pensky founded his own company and
started producing flashpoint testers, viscometers and other
machinery. The Pensky-Martens flashpoint tester was born!
The PMA5 covers the ASTM testing methods D93 A, B & C.
PNR 12 Penetration Test
• Automatically lights test flame, relights if necessary during
the test, suppresses gas source at end of test
• Built-in sensor for automatic barometric pressure correction
• Overheating detection with automatic heat shut-off during
the test
• Integrated fire-extinguishing system
• Suitable for standard & small sample volumes
The Penetrometer PNR 12 is
suitable for measurements
according various “Bitumen”
methods such as ASTM D5.
Needle-Penetration
Measure the consistency
of semi-solid and solid
bituminous mixtures.
Rod-Penetration
Measure the apparent
viscosity (Bitumen No.) of
filler aggregates used in
bituminous mixtures.
Cone-Penetration
Determine the consistency of
hot-applied, fuel-resistant joint
sealants with or without being
immersed in fuel or oil.
ADU 5 Automatic
Distillation Unit
Examine motor gasolines,
aviation gasolines, aviation
turbine fuels, special boiling
point spirits, naphthas, white
spirits, kerosenes, gas oils,
distillate fuel oils, solvents and
similar petroleum products.
• Volume detection by solid
state light barrier system
• Temperature controlled
swing-out receiver chamber
• Integrated computer
(with Windows & ADUpro
software)
• LIMS, impact or ink-jet
printer are connectable
23
Spectroscopy
SPECTROSCOPY
Elemental analysis from sub ppt to percent
eayr
Y
0
1 rrant
Wa tical
p
on O onents
p
m
Co
Highest performing
ICP-MS
Powerful, patented
technology:
PlasmaQuant® MS
The PlasmaQuant® MS is the
world’s highest performing
ICP-MS with unsurpassed
sensitivity of over 1.5 billion
counts/second/ppm.
Integrated patented technologies provide an efficient
and robust plasma system,
superior interference removal
and extended linear dynamic
range, handling any application with ease.
Two models are available that
serve both the routine and
research industries.
High-Resolution Array
ICP OES
contrAA®
From budget AAS to the
strongest Zeeman
PlasmaQuant®PQ 9000
The most powerful ICP
OES.
PlasmaQuant® PQ 9000 combines robust high-resolution
technology and a revolutionary
small design.
Outstanding analytical capabilities arise from synergetic
interactions between its four
patented key components:
Unique multi-element
analysis with flame, hydride
and graphite furnace
technology, using just one
light source
The contrAA® series exceeds
the performance of conventional AA spectrometers in all
parameters. High-Resolution
Continuum Source AAS (HRCS AAS), represents previously unattained effectiveness
and quality of measurement
results. Following decades of
experience in the development
of spectrometers and graphite
furnaces, a vision has become
reality with the contrAA®
series, which finally closes the
gap between ICP OES and
AAS.
novAA: AAS for flame,
hydride and direct solids analysis with D2 background correction. Nova 350: Flame. Nova
400P Flame/Graphite/Solids.
• High-resolution optics
• V Shuttle Torch
• Dual View PLUS
• High-frequency generator
24
Zeenit: 3 Field Mode for maximum sensitivity or for expansion of linear working range;
Dynamic Mode for automatic
adaptation to varying element
concentrations without dilution.
Mercur AAS/AFS Analysers
Based cold vapour technique
using AFS or AAS, with or
without enrichment.
Mercur Duo and Duo Plus tandem analysers based on AAS/
AFS with or without enrichment to sub ppt.
www.mep.net.au
Spectroscopy
TOC/TN, AOX/TOX
SUM parameter analysis for routine and research
multi N/C®
High performance TOC analysers
AOX/TOX: Fast, flexible and cost-effective
Routine and specialist tool for any application
The multi N/C® series offers the optimum solution for
every application.
The parameters TOC, NPOC, POC, TC, TIC and TNb can be
measured quickly, easily and without any conversion in liquid
and solid samples.
Working with multi N/C® series analysers guarantees
compliance with the valid national and international
standards, such as: ISO, EN, DIN, EPA, ASTM, FDA and
pharmacopoeias.
multi X® 2500 – A versatile system that opens up
new dimensions in AOX analysis
Whether fastest AOX routine analysis in vertical operation
mode or reliable determination of the smallest EOX trace
concentrations in horizontal operation mode, the double
furnace technology of the multi X® 2500 allows you to
select the best combustion mode for your application.
The intelligent software multiWin®, the fast changeover
between column and batch method, and the user-friendly
design ensure outstanding ease of use and efficiency. Diverse
automatic sampling systems offer convenient and uniquely
flexible operation. The system greatly minimises idle time and
increases the throughput of AOX samples – you remain
flexible and cost-effective.
25
Spectroscopy
UV-VIS SPECTROSCOPY
Spectrophotometers for all budgets
The SPECORD® series covers the range from budget-priced,
single-beam to high-performance real double-beam instruments with Cooled Double Detection. They also include high
power diode-array systems for simultaneous high-speed
measurement and spectrophotometry using Split-Beam technology.
All our powerful spectrophotometers operate in the spectral
range of 190–1100 nm. A versatile software provides maximum efficiency and offers specific tailor-made software packages. The extensive range of accessories enables flexible and
convenient operation in various fields of application.
ELEMENTAL ANALYSIS
From petrochemical to environmental samples
multi EA® 4000
C, S, Cl analysis in solids
multi EA® 5000
Elemental Analyser
Determining carbon, sulphur and chlorine from solid samples
is not a problem! The multi EA® 4000 convinces with its ease
of use, analysis flexibility, and particularly excellent instrument
stability and precision.
This universal talent determines C, N, S, Cl as well as TOC, EOX
and AOX/TOX.
• The parameters TS, TC, TX, TOC, TIC, EC and BOC are
determined quickly and easily in organic and inorganic solids.
• Determination of TOC, TIC in one simple step without sample
preparation
• Low operating costs
• State-of-the-art NDIR detector
• One analyser for liquid, paste-like, solid, gaseous and LPG samples
• Multi-matrix autosampler for the fully automatic determination of
solid and liquid samples
• Conformity with a multitude of common international and national
standards such as ASTM, EPA, DIN, ISO, EN etc.
• Double furnace technology, vertical and horizontal operating
mode in a single device
• Flame sensor technology for matrix-optimised sample combustion
• Flame sensor technology for matrix-optimised sample combustion
26
www.mep.net.au
Spectroscopy
RAMAN / NEAR-INFRARED SPECTROSCOPY
Control at the speed of light
Near-infrared spectroscopy is a simple,
quick, nondestructive technique.
Metrohm NIRSystems instruments can be installed in the
laboratory, atline or directly into a process stream, dryer,
extruder, or reactor.
The measurement mode and location of the analyser
depend on the optical properties of the samples, the
required analyte selectivity and sensitivity, the duration
of the process run and the monitoring and control
requirements.
A suitable analyser is available for every sample type and
processing environment.
Mira
Metrohm Instant Raman Analyzers
With the mobile Mira spectrometers you can rapidly
extract a great deal of chemical information of a
wide variety of unspecified samples. Within seconds,
the handheld Analyzerrs offer you reliable and easy
interpretable results, be it for material verification or
counterfeit detection.
• Reproducible results with averaging Orbital- RasterScan (ORS) mode for the most complex samples
• Maximum flexibility – «open library» principle ensures
Laboratory / At-Line
Analysers
Process Analysers
A patented monochromator
and modular sampling accessories make Metrohm NIRSystems
instruments designed by Foss
uniquely capable of analysing
powders, granules, solids, slurries, gels, pastes, and turbid or
clear liquids, in any order.
Metrohm NIRSystems Process
Analyzers are setting the
standard for real-time process
analysis. Designed for seamless
integration into process control
strategies, these NIR (nearinfrared) Analyzers provide outstanding measurement stability
and performance.
Users can optimize the measurement method in reflectance, transmittance or interactance mode according to
sample type. Fiber optic probes
permit the use of laboratory
instruments for scale-up and
reaction monitoring as well.
Process NIR analysis requires no
sample handling or reagents
and no disposables; potential
environmental concerns and
potential health and safety risks
associated with sampling are
eliminated.
reliable outcomes
• Reduced to the max – light, compact, handy
27
SIEVE ANALYSIS
Taking a close look at quality
SIEVE with the highest precision for
accurate results
RETSCH sieve shakers and test sieves are the key to easy, rapid,
reproducible and, above all, accurate analyses.
• Manufactured in accordance with ISO 3310-1 or ASTM E11
• One piece construction
• Unique, fully automatic production process and optical inspection
• Superior product quality
• Full traceability ensured with clear and precise laser-engraved
labelling
RETSCH’s test sieves are available in a range of frame sizes:
200 mm, 203 mm (8”), as well as smaller (100 mm and
150 mm) and larger (305 mm, 400 mm and 450 mm) sizes.
Stocked in Australia:
The most commonly requested sieves are held
on stock in Australia for your convenience.
AS 200 Jet for powders
Sieving with a 3-D effect
Air-jet sieving for fine powders
that tend to agglomerate
is considerably faster than
vibration sieving, yet gentle on
the material by air dispersion
of the powder.
The patented electromagnetic
drive of the AS 200, 300 and
450 produces a 3-D throwing
motion for optimal use of the
open sieve area.
• For dry and wet sieving
• Control, evaluation and
documentation with EasySieve®
software
28
www.mep.net.au
PARTICLE SIZE AND SHAPE ANALYSIS
Because size does matter
Patented Camsizer Measurement Principle
Digital dynamic image processing with the
CAMSIZER P4 and the CAMSIZER XT
Measuring principle
The CAMSIZER family of dynamic image analysis instruments
are based on the proven, patented two-camera system.
Depending on the particle size and the degree of
agglomeration, either the CAMSIZER P4 or alternatively
the CAMSIZER XT represent the optimum solution for your
particular sample and your analytical requirements.
Camsizer P4
Camsizer XT
• 20 µm to 30 mm
• 1 µm to 3 mm
Typical examples of applications:
• Pourable bulk materials
• Gravity dispersion
• Permanent quality assurance during production
• Unattended operation with
• Air pressure dispersion
• Immediate checks on incoming and outgoing goods
• Meaningful laboratory measurements with a wide range
Auto Sampler option
• On-Line version available
• Fine and agglomerated particles
• Wet dispersion
of different sample materials
• Roundness of sand and sediments for geologists e.g. proppants
and frac sands
29
Sample Preparation
PERFECT SAMPLE PREPARATION
Essential for reproducible analysis
Solutions for size reduction and
homogenisation: milling, grinding
and cutting
Reliable and accurate analysis can only be guaranteed
after reproducible sample preparation. The aim of sample
preparation being to turning a laboratory sample into
a representative part sample with homogeneous analytical
fineness.
Cutting Mills
Jaw Crushers
RETSCH offers a comprehensive range of the most modern
mills and crushers for coarse, fine and ultra-fine size reduction
of almost any material. The choice of grinding tools and
accessories not only ensures contamination-free preparation
of a wide range of materials but also the adaptation to the
individual requirements of different applications.
The Cutting Mills SM 100, 200
& 300 are used for preliminary
size reduction by cutting and
shearing of soft, mediumhard, elastic and fibrous
materials. They are suitable for
temperature-sensitive samples.
The powerful RETSCH Jaw
Crushers (BB 50, 100, 200,
300) are designed for the
rapid, gentle, coarse and primary crushing of hard, brittle
and tough materials. The
breaking jaws are available in
a variety of materials.
Selection guide
RM 200
PM 100
PM 200
PM 400
MM 200
MM 400
CryoMill
10
10
15
15
15
10-40
130
80*60
2
5
0.04
0.5
0.1
Ball/ Mixer Mills
DM 200
130
4
Mortar Grinders
RS 200
90
SM 300
50
SM 200
0.01
SM 100
0.1
GM 300
0.04
GM 200
8
SR 300
8
SR 200
6
SK 100
10
Twister
4
ZM 200
10
BB 300
8
BB 200
20
BB 100
15
0.2520
35
0.5
Disc Mills
Knife/ Cutting
mills
Rotor Mills
Jaw Crushers
Final fineness*
approx.(mm)
BB 50
Feed size*
approx.(mm)
0.08
0.05
0.3
0.3
O
✓
✓
O
O
O
O
O
O
O
✓
✓
✓
✓
✓
✓
✓
✓
✓
O
 
 
O
O
O
✓
✓
✓
✓
✓
✓
✓
✓
✓
 
 
 
 
 
 
 
✓
✓
✓
✓
✓
✓
✓
✓
✓
Chemicals
products
O
O
O
O
✓
 
Coal, coke
✓
✓
✓
✓
✓
 
Construction
materials
✓
✓
✓
✓
 
 
O
0.001 0.001 0.001
0.01
0.005 0.005
Electronic scrap,
circuit boards
 
 
 
 
✓
 
O
 
 
 
 
O
✓
✓
O
 
 
✓
✓
✓
✓
✓
✓
Feed
 
 
 
 
✓
✓
O
✓
✓
✓
✓
✓
✓
✓
 
O
 
O
O
O
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
O
O
O
O
✓
✓
 
 
 
 
✓
✓
✓
✓
✓
✓
✓
✓
✓
Food
 
 
 
 
✓
✓
Glass, ceramics
✓
✓
✓
✓
 
 
O
Leather, textiles
 
 
 
 
 
 
O
O
O
 
 
Minerals, ores,
stones
✓
✓
✓
✓
O
 
 
O
O
 
 
 
 
 
O
O
O
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Pharmaceutical
products
 
 
 
 
✓
O
O
✓
✓
✓
✓
O
O
O
O
 
✓
✓
✓
✓
O
✓
✓
Plants, hay,
straw
 
 
 
 
✓
✓
 
O
O
O
O
✓
✓
✓
✓
 
O
✓
✓
✓
✓
✓
✓
Plastics, cables,
rubber
 
 
 
 
✓
 
 
 
 
 
 
O
✓
✓
 
 
 
 
 
 
O
Secondary fuels
 
 
 
 
✓
 
O
 
 
 
 
✓
✓
✓
✓
✓
 
 
 
O
O
O
O
✓
✓
Soils, sewage
sludge
O
O
O
O
O
 
O
 
 
 
 
Wood, bones,
paper
✓
✓
✓
✓
✓
✓
✓
✓
✓
O
 
 
 
✓
 
 
 
 
 
 
O
 
O
✓
✓
✓
✓
✓
✓
✓
O
✓
✓
✓
✓
✓ Suitable O Suitable to a limited extent *depending on sample and grinding time. This chart serves only for orientation purposes. The selection of the appropriate mill depends on a
variety of parameters of the actual application. Please contact us to discuss the best solution.
30
www.mep.net.au
Sample Preparation
PERFECT SAMPLE PREPARATION
Essential for perfect analysis
Rotor Mills
Mixer Mills
Knife Mills
The Rotor Mill series includes
ultra-centrifugal mills (ZM 200
and Cyclone TWISTER), rotor
beater mills (SR 200 & 300) and
cross beater mills (SK 100).
Suitable for the preliminary
and fine size reduction of soft,
fibrous and also hard materials.
The RETSCH Mixer Mills, MM
200 & 400, are used for size
reduction and pulverisation of
hard, medium-hard and brittle
samples as well as for soft,
elastic or fibrous materials.
In food or nutritional laboratories, in chemical or biological
research institutes – GRINDOMIX Knife Mills, GM 200 & 300,
provide size reduction and homogenisation of food and feed
materials, meeting and exceeding all special laboratory and
analytical requirements. They process substances with a high
water, oil or fat content just as quickly and reliably as dry,
fibrous, soft, elastic or medium-hard products.
• Wet and low temperature
grinding (MM 400)
• Ideal for cell and DNA-RNA
extraction
ASSISTING
Dividing, feeding, drying and pelletising samples
Retsch Assisting
RETSCH asssisting instruments optimise and support sample
preparation. They provide reproducible processes with greater
efficiency and are characterised by their ease of handling.
• Sample Dividers:
essential for the exact and representative division
of pourable bulk goods in the laboratory
• Vibratory Feeders
for uniform and continuous feeding
• Pellet Presses
for preparation for XRF analysis
• Fluid Bed Dryer
for gentle drying and dispensing
• Ultrasonic Baths
for cleaning (test sieves, grinding tools) and degassing
31
Microwave Chemistry
MICROWAVE CHEMISTRY
Sample decomposition
Microwave sample preparation
Clear solutions for great results
The Anton Paar Multiwave range of microwave sample
preparation systems provide the ultimate in flexibility and
power to handle a huge range of applications, bridging the gap
between sampling and analysis. They are capable of:
Acid digestion: achieving safe and complete digestion in a
fraction of the time required by conventional techniques
Leaching: US-EPA and ASTM methods available as standard
with continuous control and documentation
Solvent extraction: performing Microwave-Assisted Extractions
(MAE), with dramatically shorter reaction times compared with
conventional methods such as Soxhlet
Evaporation: evaporating acids and pre-concentrating aqueous
solutions directly from reaction vessels
Drying: perform gentle drying without carbonisation or
contamination of samples, in a fraction of the time
Special applications: oxygen combustion for the determination
of halogens, UV digestion of liquid samples or acid hydrolysis of
proteins
32
Routine digestions
Simple and quick
The High Pressure
Asher HPA-S
Multiwave Go and PRO
are quick and convenient
microwave digestion systems
for the routine handling of
environmental, food and
many other samples. With
a typical process time of
just 30 minutes, including
heating, holding and cooling,
Multiwave simplifies sample
preparation tasks and provides
solutions ready for analysis in
the shortest time.
This is the reference instrument for wet chemical decomposition under high pressures.
The instrument is TÜV certified
and can prepare even the most
difficult samples for reliable
AAS, ICP-OES, ICP-MS and
voltammetric analysis.
www.mep.net.au
Microwave Chemistry
MICROWAVE CHEMISTRY
Synthesis solutions
Microwave synthesis
From R&D to kilo-scale production
The new generation of Anton Paar Microwave Synthesis systems
has been developed in response to the increasing demand for
straightforward solutions from initial R&D to kilogram scale up
production.
Getting started with Monowave 300 for Research &
Development
Method development with the Monowave 300 opens up
pathways to new reaction routes for a broad variety of
applications. Sequential method optimisation employing the
24 position autosampler MAS 24 with a Monowave 300
or parallel optimisation with the silicon carbide rotors of a
Multiwave PRO considerably facilitates chemists’ everyday work.
Want more? Scale up
with Multiwave PRO
Masterwave BTR
The big deal!
For parallel scale-up to the
multi-gram range, use the
Multiwave PRO.
Direct scalability of your
optimised methods allows for
library generation in significant
gram amounts. A wide choice
of rotor configurations provides
the ideal solution whatever
the task.
Batch-type processing in the
litre scale with Masterwave
BTR leads to as much as
250 g product in a single run.
The user interface for the
software is identical, allowing
direct method transfer from
the Monowave 300. Simply
multiply the amounts of your
mixture and follow your
optimised protocols.
33
MEP Quality Service
MEP SERVICE – EXPERTS BY YOUR SIDE
Our engineers are qualified to maintain your instruments
Instruments that are serviced
on a regular basis fail less
frequently, provide more
accurate results and, put
simply, perform better.
Our Service Engineers have
received extensive factory
training and are authorised to
service, diagnose and repair
your systems.
The tools they use are specially
designed to pinpoint even
the slightest deviance from
manufacturer specifications, so
they can return it to factorynew operation.
34
MEP Remote
Support
Analytical Instrument
Qualification
Calibration of Metrohm
dosing & exchange units
Metrohm Software Care
The advantages of MEP
Remote Support are
obvious.
With our remote service,
you will get help directly and
precisely when you need it.
You can use your valuable time
more efficiently and reduce
downtime on your analysis
system to a minimum.
MEP Remote Support is
available for all systems that
are controlled by PC-software.
All you need to benefit from
our new service is an internet
connection.
Play it safe with professional and certified IQ/OQ.
Stay on the safe side.
An investment that pays off
As QA manager in a regulated
industry you face strict requirements regarding Analytical
Instrument Qualification (AIQ).
However, complying with the
very latest regulations from the
USP, FDA, GAMP, PIC/S, and
other regulative authorities at
all times is a challenge that
takes time and effort.
With this in mind, MEP have
developed services exactly
tailored to your needs. You
protect yourself against liability
while saving valuable time and
money that you can spend on
other work in your lab.
The Dosing Test gives you
certainty that your Metrohm
buretet is dispensing the displayed value. This in turn gives
you assurance that you really
can rely on your results, and
that this will not cause problems during auditing.
You will receive the corresponding certificate confirming
that your burette continues
to comply with the requirements as verified by the test.
You know that you can rely
100 percent on the accuracy
of your Metrohm burette.
Software maintenance for safer
and more productive work
Metrohm Software Care is the
perfect supplement to your
MEP Care Contract. A system
that does not get regular maintenance can become a safety
risk and negatively affect
both quality and productivity.
Regular maintenance guarantees optimal system availability
and maximum performance.
With Metrohm Software Care
you benefit from peak performance of your analysis system,
minimise down-time and can
all but remove the risk of losing any data.
www.mep.net.au
MEPCare™
MEPCare™ CONTRACTS
Service, certainty and so much more
No matter whether you work for a private company or for a
public institution, as a laboratory manager you are required to
use your resources as efficiently as possible. Failing equipment
is a risk you simply cannot afford.
A MEPCare™ Contract is your operational insurance card:
safeguarding your instrument from failure and giving you peace
of mind – from day one and for as long as you have it.
Cost certainty
With a MEPCare™ Contract costs for maintenance and servicing
are fixed and, more importantly, known to you – so you can
keep in line with your budget.
Reliable measurement results
A MEPCare™ Contract means instruments are installed, calibrated
and adjusted by trained and authorised MEP service professionals
to ensure their operational efficiency.
Less risk of failure
Instruments that are serviced regularly fail less frequently and
have a longer lifetime than instruments that do not get this care.
Fast repairs
With a MEPCare™ Contract professional help is just a phone call
away. Repairs are always performed by trained and authorised
service professionals on a priority basis.
Original manufacturer spare parts Original spare parts provide the best fit for your instrument and
ensure its long lifetime.
The services offered by MEP are geared to your requirements.
You can choose from a clearly defined range of MEPCare™
Contracts, which build on each other in terms of scope and
provision.
Preventative maintenance for a long service life
Regular maintenance is key to long-lasting, trouble-free operation
of your analytical instruments and accurate measurement results.
That is why all MEPCare™ Contracts include at least one
preventative maintenance check every year. This is carried out by
a trained and authorised MEP service specialist. They know the
hardware and software of your analyser by heart and can advise
you on best practices to get the most out of your system.
MEP Instruments
Quality Service
Discounted spare parts
With a MEPCare™ Contract you benefit from discounts on spare
parts as specified in your Contract.
Maintain the value of your investment
Regular maintenance increases the service life of your
instruments, so you retain the value of your investment.
Repair Protection
Repair Protection
On-Site Service
On-Site Service
Priority Response
Priority Response
Priority Response
Priority Response
Preventative
Maintenance
Preventative
Maintenance
Preventative
Maintenance
Preventative
Maintenance
Standard Care Eco
Standard Care
Extended Care Eco
Extended Care
35
Partnerships
LASTING PARTNERSHIP
At MEP, we do not outsource customer service
In Australia and New Zealand you can tap into the vast
knowledge and experience of the world’s leading network
of scientists using MEP Instruments’ on location support and
service.
You benefit from a wide range of support options and services
of which many are complimentary.
ONE/14
Whilst you concentrate on optimising your operations MEP is at
your side to assist with an efficient transfer of know-how. Our
commitment helps you to improve and maintain high analytical
standards and develop new solutions in the lab and in the field.
INFORMATION
Tea Time
On request, a free Morning
Tea session can be held at
your production facility,
university or research centre.
At Morning Tea sessions,
you will enjoy direct contact
with our experts in specific
fields and have your
questions answered, whilst
having the opportunity to
attend demonstrations and
presentations of the latest
developments specific to your
industry or research field.
Just call us to arrange for a
Morning Tea session. We will
bring the cake.
News
New instruments and software
for ion chromatography and CVS
Customer application
A report from a research vessel
Application report
Round robin test – voltammetric trace analysis
Application Bulletins
Application Notes
A vast number of application
reports, notes and bulletins
are available to our
customers 24/7 online. They
contain concise but precise
descriptions of steps and
configurations to perform
specific analyses to get you
started in a flash.
You can also request them at
any time by phone or by email.
Can’t find what you are
looking for? Call our experts.
They will be happy to suggest
a solution for you.
36
Newsletters & Magazines
Many of our newsletters are
published online only as our
small contribution to a greener
environment. Often on a
monthly schedule, they cover
applications and news related
to specific industries. We currently offer the following titles:
BeerPops&more, WineLab,
FoodLab, Mines&Minerals, Air
Water Soil, Teaching+Research,
Process Analytics,
PetroChemist and the
Analyst Express.
Subscription is free. Visit our
website to register.
Printed versions of Analyst
Express, Metrohm Information
and Retsch – The Sample are
distributed free of charge to
our customers.
Workshops & Seminars
MEP regularly offers seminars
covering selected topics in
advanced analytical chemistry.
These seminars are held
by leading national and
international authorities at
a venue near you.
The seminars are free, but
registration is required.
Invitations are published in our
newsletters and our website.
Workshops offer a more
hands-on approach to new
solutions. In these workshops
you will often have the
opportunity to perform certain
analyses yourself or within
your workgroup.
www.mep.net.au
Application Testing
TEST BEFORE YOU INVEST
Application development and testing
Application testing and development
laboratory – Sydney & Melbourne
MEP customers can always be certain that the acquired
equipment will perform as expected. Analytical results will
be accurate, precise and repeatable. We have installed a
modern, efficient 120 m2 application lab at our headquarters in
Gladesville, Sydney and at our Melbourne premises to best serve
our customers.
Unsure if your chosen method will produce the results
you anticipate? Test before you buy.
At MEP’s state-of-the art application lab we provide certainty
before you make your final purchase decision. We test for
you the desired method for viability and accuracy, develop
alternatives and optimise automation projects before you buy.
Fluctuating parameters?
Did some possibly undefined parameters change during
operation? Don’t let your people tinker too long. Save time and
money. Our experts will work it out for you, right here, at our
headquarters.
Training
Our application lab is available for expert instruction and
training. Contact us for more details and for advance bookings.
37
Applications Chart
APPLICATIONS, METHODS AND SERVICES BY INDUSTRIES
25
Assisting (Sample Prep)
31
Atomic Absorption Spectroscopy
24
●
Baume
17/19
●
Brix
17/19
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Chloride
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
CO2
19
●
Combustion IC
11
●
●
●
●
●
●
Conductivity
9
●
●
●
●
●
●
Crushing
30
Cutting
30
Density (Lab, Field)
18
●
●
●
Density (Process)
17
●
●
●
●
●
Density
17
●
●
●
●
●
●
●
●
●
Differential Absorbance Colorimetry (Process)
14
●
●
●
●
●
●
●
●
●
Direct Solids by AAS
24
●
●
●
●
●
●
●
●
●
Distillation
23
●
●
30
High Resolution CS AAS
24
ICP MS
24
ICP OES
24
Indentation/Hardness
22
Ion Chromatography
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
10
●
●
●
●
●
●
●
●
●
●
●
●
●
●
9/14
●
●
●
●
32
●
●
●
●
Microwave Sample Decomposition
32
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
33
Milling
30
●
●
●
Mixer Mills
31
●
●
●
NIR
27
●
●
O2
19
Particle Size and Shape (digital)
29
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Microwave Synthesis
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Microwave Digestion
●
●
●
●
●
●
●
●
●
●
●
Grinding
●
●
10
12
●
●
26
23
●
●
Cations / Metals
●
●
●
C, S, Cl, N
●
Wine
AOX/TOX
●
Water
10
Flash Point Testing
Power
●
●
Anions
University
●
4
Electrochemistry
Plastics
Pharmaceuticals
Petroleum
Paints
Mining
Metal
Life/Sciences
Food
Hospitals
Fertilizer
Explosives
17/19
Energy
Environment
16
Alkalinity
ISE Ion-Selective Electrodes (Process)
38
Detergents
Alcohol
Chemicals
Aerosols and Gases
Cement
Beverage
Applications
and Methods
Electroplating
Industries
●
●
●
●
●
●
●
●
●
●
●
www.mep.net.au
Applications Chart
APPLICATIONS, METHODS AND SERVICES BY INDUSTRIES
22
Scratch test
22
●
●
Sieving
28
●
●
Sugar purity
20
TAN/TBN
4
Titration
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Wine
28
SAXS – Nanostructure Analysis
●
●
●
●
●
●
Water
Sample Preparation
Power
●
●
University
●
21
Plastics
20
Rheology
●
●
●
●
●
●
●
●
Pharmaceuticals
Refractometry
●
●
Petroleum
12
●
●
Paints
Rancidity
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4/14
●
TOC online
15
●
Total acidity
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Trace metal analysis
12
●
●
Tribology
22
●
●
●
●
●
Voltammetric Heavy Metal
●
Mining
13
27
Metal
●
●
Raman Spectroscopy
Viscosity
●
●
●
●
Life/Sciences
●
Food
●
Potentiostats
UV-Vis
●
●
●
Hospitals
20
●
Fertilizer
Polarimetry (Lab)
●
Explosives
8
Energy
4
pH
●
Environment
Peroxide number
Chemicals
23
Detergents
Penetration
Cement
Beverage
Applications
and Methods
Electroplating
Industries
26
●
●
●
●
17/21
●
●
●
●
14
●
Water (Karl Fischer)
7
●
●
●
Wet Process Analysis
14
●
●
●
Zeta Potential
22
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Service and Support
Overview
Application Notes
36
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Application Testing + Development NSW/VIC
37
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Calibration
34
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
IQ/OQ
34
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
MEP Care Contracts
35
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Newsletters
36
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Service Remote Support
34
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Software Service
34
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Training Courses
36
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Workshops
36
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
39
MEP INSTRUMENTS IS YOUR EXPERT
PARTNER TO ASSIST YOU IN RESOLVING
YOUR ANALYTICAL CHALLENGES.
Victoria & Tasmania
17/25 Cook Rd, Mitcham VIC 3132
PO Box 107 Mitcham VIC 3132
Tel (+61) 03 8872 7000 Fax (+61) 03 9873 4867
Western Australia
Unit 6, 27 Tamara Drive, Cockburn Central WA 6164
Tel (+61) 1300 720 485 Fax (+61) 08 9381 5518
www.mep.net.au
South Australia & Northern Territories
34 Grove Avenue, Marleston SA 5033
Tel (+61) 1300 720 485 Fax (+61) 08 8351 5398
Queensland
Unit 9a, 253 Leitchs Rd, Brendale QLD 4500
PO Box 7280 Brendale QLD 4500
Tel (+61) 1300 720 485 Fax (+61) 07 3205 8894
New Zealand North
MEP Instruments Ltd
Unit E2, 14-22 Triton Drive
Rosedale, Auckland 0632
PO Box 305161 Triton Plaza Auckland 0757
Tel (+64) 09 477 0620 Fax (+64) 09 476 0631
New Zealand South
352 Manchester Street, Christchurch 8141
PO Box 13 990 Christchurch 8141
Tel(+64) 03 365 9954 Fax (+64) 03 365 9958
SKA-CSSEA - M93520150127-1
New South Wales
(Head Office)
MEP Instruments Pty Ltd
Unit 11, 56 Buffalo Rd, Gladesville NSW 2111
PO Box 2173 Boronia Park NSW 2111
Tel (+61) 02 8899 5200 Fax (+61) 02 8899 5299

LEADING ANALYTICAL INSTRUMENTATION

Transcription

Similar documents

Press Release: Video manuals - how to install, operate, and

Transhield

the Metrohm Siam catalogue 2017 (PDF, 28pp)

Wednesday, Dec. 12, 11 am to 1 pm Texins Activity Center

WE MANUFACTURE AND SUPPLY SURGICAL,

Kenban-do¯ , the Japanese name of the store, means "The Hall of

QATAR RAIL DOHA METRO PROJECT

Broschure

Untitled

Contents - February 2003

THE HOME CAFÉ - Businesses For Sale