2012 Product Catalog Voted

2012
Product
Catalog
L
A
T
I
G
F
I
D OO
R
P
Voted
2010 & 2011
Inside Archery’s
Best Buy Award
Hunting Silencer Category Winner!
With over 10 years of success
BOWJAX DAMPENERS
ROCK!
Monsterjax Solid Limb
Limb Dampeners #1022
Monsterjax uses 6 arms that vibrate at different frequencies
to dampen the vibration and contact the limb of a bow.
They come with a strong weatherproof double-stick
tape. Odorless. Available in black, olive, red, pink, blue,
purple, brown, orange and silver. The Monsterjax weigh
167 grains each. Patent #7,703,449
Magnum Split Limb
Dampeners #1026
Reduces Noise! Magnum Dampeners extend the life of
your bow limbs. They have thick rubber pads that go in
between the limbs for maximum vibration control. No
bow press needed simply install with provided screws.
Rectangular base sized for 4 different size limb gaps to
provide a net fit. Patent #7,703,449
L
A
T
I
G
F
I
D OO
R
P
#1026o = ½” width black
#1026a = .70” black
Monsterjax Split Limb
Dampeners #1025
Magnum Monsterjax Split Limb Dampeners are new and
improved for 2011! The 6-arm dampener is larger than
before, with better contact to the limbs. These are
constructed with a 1.5” diameter round base and can
fit a more universal gap. These install easy and fasten
together with a screw. Colors: black
Patent #7,703,449
Slimjax Solid Limb
Solid Limb #1028
For those using new compound bows with ultra slim limbs,
1 1/8” wide or less, Slimjax Limb Dampeners will work for
you. They also work great on Recurve, Long Bows and
Youth Bows. They come in black, pink, olive, red and
blue. Slimjax weigh 142 grains each.
#1026b = .90” black
#1026c = 1.125” black
Magnum Split Limb
Dampeners #1026 TARGET COLORS
Magnum Split Limb Dampeners with thick rubber pads that
go in between the limbs for maximum vibration control.
Patent # 7,703,449
#1026a = .70” blue
#1026b = .90” blue
#1026a = .70” red
#1026b = .90” red
#1026a = .70” pink
#1026b = .90” pink
Revelations Split Limb
Dampeners #2024 = 2/pk, #2025 = 4/pk
New X-shaped Limb Dampeners wedge snuggly between
the limbs, without screws or adhesives. Weighing only
269 grains a piece, you can double them up on a
limb and they still weigh less than the competition.
The dampener arms move freely to reduce vibration
and to save the life of your limbs. Fits .70” split limb
gap, common fit for Hoyt and Bowtech Invasion Bows.
Coming Soon - .90” width gap.
Limbjax - The Original
Solid Limb #1020
The original Limbjax attach to the limb with a strong
double-stick tape. They utilize 4 arms instead of 6.
Limbjax actively deaden noise and vibration, helping
the life expectancy of your bow limbs. The Limbjax
weigh 158 grains each. These are available in black
and olive green.
1
Enhancer Stopper
For Hoyt/Fuse String Stopper #1064
New Enhancer Stopper for Hoyt/Fuse String Suppressors.
Fits over the top of the old Hoyt/Fuse stopper. It doesn’t
require glue or tape to stay in place. It’s super soft shell
makes your Hoyt/Fuse Suppressor quieter. Provides an
extra soft landing for your string suppression system.
You may need to shorten the rod slightly with a bench
grinder.
2
4-Dot Replacement Stopper
Stopper #1057
Our 4-dot stopper is made to fit all 3/8” rod string
suppression systems. It uses 4 bumps to align the string
completely in the middle which helps to eliminate
alignment problems. It’s made of a super-soft polymer
and is very quiet and long lasting. Colors offered are
black, silver, orange, pink, brown, purple, neon green,
blue and red. This color scheme is offered also in Slipjax
#1040, Monsterjax #1022, Maxjax #1050 and #1051.
Airborne Stopper
Stopper for Bowtech ‘08 #1058
The Airborne Stopper series is for 2008 series Bowtech
Airborne and Diamond Marquis String Suppressors. No
glue or adhesive is needed. Made of super soft polymer,
Long-Lasting direct replacement!
Colors: black
MacDaddy Stopper
Stopper #1059
This over-molded stopper has a soft polymer molding over a
durable polymer underneath. It’s longer lasting and better
at dampening than any string stopper we have seen to
date. Fits all 3/8” rod string suppression systems. One
of the great benefits of this stopper is the deep 1/4”
groove to catch the string. This is the only stopper we
have found that holds up well even on crossbows.
Colors: black
Jumbo String Stopper
Stopper #1061
This stopper has a 1” diameter, almost 2 inches in length,
and same super soft polymer as the MacDaddy stopper.
It’s long-lasting and very effective. It’s made to fit a
3/8” rod and comes in black only.
3
Slipjax
String Silencers #1040
Slipjax String Silencers have NEW dimples to help retain
the silencer in the string. They require a bow press, but
minimal effort to install. They are durable enough for
most compound bows today. Available in black, pink,
red, blue, orange, purple, neon green, olive green and
brown. Weighs 19 grains
L
A
T
I
G
F
I
D OO
R
P
Super Slipjax
String Silencers #1040s / #1043
Super Slipjax String Silencers have NEW dimples to help
retain the silencer in the string. They are smaller and
lighter weight, only 15 grains. They are made of a
stronger polymer, made to withstand compound bows
with speeds of 320 fps. Colors: black
(For a thicker, larger style Slipjax,
try #1043 Crossbow Slipjax.)
Ultrajax ]
String Silencers #1032 = 2/pk, #1034 = 4/pk
The Original BowJax String Silencers, and they don’t require
a bow press! These long-lasting silencers are slit down
the center so you can easily wrap serving string or the
provided zip ties to fasten them in place. These string
silencers can be trusted as a “last minute application”
because they don’t change your bow set-up. Since they
fit over the string, they won’t cause peep twist after you
set-up your bow. These weigh 21 grains. Color: black, red,
pink and fluorescent green
Patent # 6,761,158
Ultrajax ][
String Silencers #1036
These long-lasting string silencers reduce noise and
vibration by surrounding the string with dampening
material. They are a favorite of many Bow and Bow
String Manufacturers. Bow does not loose velocity.
Testing shows a usual increase of 1-3 fps. Available
in silver, red, blue, pink, purple, brown, olive, orange
and black. Ultra ll weigh only 19 grains and come in a
package of 4.
4
Magnum Rizrjax
X-it Stabilizer 3”
Dampeners #1027 - 1½” base
New Magnum Riser Dampeners were designed for the
customers who demand a quiet bow. The dampeners are
double-sided and come in pairs. The Magnum Style
Dampeners will span out and the 6 molded balls will
touch the riser and dampen vibration. They have a 1½”
diameter base, and fit holes in your riser from 3/16” to 1”
+ cut-out holes. These holes in the riser can be irregular
shaped. Easy installation with the provided set screws.
Magnum Rizrjax ][
Stabilizer #1044
L
A
T
I
G
F
I
D OO
R
P
X-it Stabilizer 4 3/8 ”
Dampeners #1027b - 1” base
Stabilizer #1045/pink; #1046/black; #1047/olive
Lightweight multi-tiered assembly of Bowjax Dampeners
that help dampen vibrations. Eliminates after-shot
vibrations without the weight. According to Arrowtrade
Nov ‘07 issue, X-it’s take out 21.49% vibration (placed
excellent against competition according to price range).
Other colors may be available; orange, purple, red and
royal blue. 3.26 ounces
New Magnum Riser Dampeners were designed for the customers
who demand a quiet bow. The dampeners are double-sided,
and come in pairs. The Magnum Style Dampeners will span
out and the 6 molded balls will touch the riser and dampen
vibration. They have a smaller base then the #1027. They
have a 1” diameter base, and they fit 3/16” holes up to ½”
+ holes in the riser. These holes can be irregular shaped. Easy
installation with the provided set screws.
Get your bow all jacked up!!!
Maxjax Stabilizer 5”
If you want your bow to be at it’s absolute best, then get it
all jacked up with Bowjax dampeners.
Bowjax Rizrjax
Bowjax Monsterjax
Limb Dampener
Bowjax X-it Stabilizer
Bowjax Maxjax Stabilizer
Lightweight multi-tiered assembly of Bowjax Dampeners
that help dampen vibrations. Can be used on the end of
a Maxjax Stabilizer (or any stabilizer with a 5/16” x 24
standard thread). Always “a perfect fit” when worried
about storing in your bow case. Comes in black or pink.
Bowjax Monsterjax
Limb Dampener
Stabilizer #1048
Maxjax received a honorable mention in Inside Archery
Award 2010. Also, an independent study from Nov. ‘07
Arrowtrade Magazine showed Maxjax Stabilizers took
out 52.7% vibration. The 5” stabilizer weighs 6 ounces
and comes in Realtree AP™, Realtree APG™, and black.
You get two Maxjax Dampeners per stabilizer. Also, you
can swap the black dampeners for colored dampeners to
get your own color scheme.
Maxjax Stabilizer 7”
Stabilizer #1049
Bowjax Rizrjax
Bowjax Bigjax
5
Bowjax Slipjax
Maxjax received a honorable mention in Inside Archery
Award 2010. Also, an independent study from Nov. ‘07
Arrowtrade Magazine showed Maxjax Stabilizers took
out 52.7% vibration. The 7” stabilizer weighs 8 ounces
and comes in Realtree APG™, black, hd and hd green.
The stabilizer has a 5/16” x 24 threaded hole on the end
to accept a 3 inch X-it or extra weights at the end. Both
5” & 7” come with 2 Maxjax dampeners already installed.
6
Maxjax Stabilizer 5”
Stabilizer #1048
NEW for 2012, Lost Camo. Matches to your Mathews Bow.
Maxjax received a honorable mention in Inside Archery
Award 2010. Also, an independent study from Nov. ‘07
Arrowtrade Magazine showed Maxjax Stabilizers took
out 52.7% vibration.
Super Max 2”
Stabilizer Module #1068
New 4-arm dampener helps dampen noise and vibration
for your hunting stabilizer. The only stabilizer module
designed that has 4 arms with balls at the end for
maximum stability and control. 5/16” x 24 thread,
weights 2.25 ounces. Colors: black
Maxjax Stabilizer Dampeners
Stabilizer Dampeners #1050 (2)
These dampeners simply stretch over an existing stabilizer
to take unwanted vibration out of your stabilizer. They
fit 5/8” diameter and stretch up to an inch diameter.
They come in a package of 2 and a variety of colors:
black, pink, red, blue, olive, neon green and orange.
Weighs 275 grains
Super Maxjax
Stabilizer Dampener #1051 (1)
These dampeners simply stretch over an existing stabilizer
to take unwanted vibration out of your stabilizer. They
fit ¾” diameter and stretch up to 1 ½” in diameter.
They are much larger than Bowjax Maxjax and come
in a package of one. Super Maxjax are available in
a variety of colors like the regular Maxjax #1050’s.
Weighs 475 grains
7
Slimjax
Guide Rod Dampener #1012
At only 1” in width, this cable guide rod dampener was
designed not to interfere with your sight window and will
allow for maximum dampening. Can be placed in front of
the cable slide and act as a cable guide stop. 115 grains.
L
A
T
I
G
F
I
D OO
R
P
Bigjax
Guide Rod Dampener #1011
An original cable guide rod dampener that’s thick,
lightweight and deadens excess noise and vibration.
Place it in front of the cable guide and it acts as a cable
guide stop. 151 grains.
STS System
#1090 front / #1090 rear / #1092
A dampening system that changes the way a bow feels when
you shoot it. Stops the string at true brace height, increasing
the forgiveness in your bow. STS systems use the MacDaddy
stopper exclusively. Eliminates arm slap. Adjustable mount.
#1092 Excalibur X-bow STS - Comes with two custom made
brackets that match up to the holes in modern Excalibur
Crossbows. On the brackets are string suppression stoppers, the
MacDaddy (#1059) which are very long lasting.
Enhancer Stopper
for Bowtech String Suppressors - #1074
Fits most models, 2009-2011 series string suppressors.
This simply fits over the top of the old and doesn’t
require any glue or tape to stay in place. It’s super soft
shell makes your Bowtech suppressor quieter.
8
Crossbow Bolt Retention
Spring Dampener #1010
The new bolt retention spring damper takes out the
twang when you fire your crossbow. No adhesive or glue
is needed. They slip snuggly over the crossbow bolt
retention spring and are held in place by friction. 2 per
pack, black only.
Crossbow Kit - Solid
X-Bow Kit #1030
The Bowjax Crossbow Kit contains a pair of solid limb
Monsterjax, (a more durable strength than the normal
compound bow style), (4) X-bow Slipjax, and (1) Bolt
Retention Spring Dampener. You will need a bow press
for the string silencers. No glue or adhesive needed for
the bolt dampener. You can install these limb dampeners
4-6 inches away from the cams. Extra double stick tape
provided. Black only.
Crossbow Kit - Split
X-Bow Kit #1031
The Bowjax Crossbow Kit for split limbs contain a pair of
split limb dampeners, (4) Crossbow Slipjax, and (1) Bolt
Retention Spring Dampener. You will need a bow press for
the string silencers. No glue or adhesive needed for the
bolt dampener. The limb dampeners affix with a screw.
Crossbow Slipjax
String Silencers#1043
Crossbow Slipjax String Silencers have NEW dimples to help
retain the silencer in the string. These new and thicker
string silencers were built with crossbows in mind. They
are made of a super durable polymer that will withstand
the forces of a crossbow better than anything we’ve
tested. You can also use these great string dampeners
on a compound bow. Weighs 23 grains each, black only.
9
MVD - Motor Vibration Dampener
Dampener #1070
An accessory vibration dampener that is applied over the
diameter of any submersible electric trolling motor. This
vibration dampener is molded as a single unitary piece of
an elastomeric compound. The appendages counteract the
frequency range of vibrations produced while an electric
trolling motor is under propulsion. The device “MVD”
dampens vibration on a motor by at least 22% according to
laboratory sound tests, for just one dampener. Try a second
one to take out an extra 4-5% vibration reduction.
L
A
T
I
G
F
I
D OO
R
P
Shaft Dampener
Shaft Dampener for Trolling Motor #1069
Has a 1¼” inner diameter. Made to go on the shaft of your
trolling motor to take out extra vibrations there. Slit down
the side and applied together with provided zip ties.
Gel Grip Strips
#1073
Self-adhesive strips will not fall off in any weather condition.
Can be used on the sides of grip or front and back, to
insulate hands from the cold. Can also be used on top
shelf under your favorite fall-away rest. These strips
are 3 1/2” in length and 3/4” wide. 2/pkg, black only.
Speed String Sleeves
#1037
Weigh only 16 grains a piece. Made from the same material
as our longest lasting Ultra II String Silencers. Speed
String Sleeves are Long-Lasting String Silencers used
to strategically place weight on your bowstring to
gain velocity. Can be used with or without other string
silencers. Eliminates the need for speed buttons, silences
while improving speed. Installs by slipping over the string
(requires bowpress). Colors: black, blue and red.
10
Bowjax Gear
#1080 T-shirt/#1083 Long Sleeve Shirt
Show off your Bowjax pride with our official
Bowjax shirts and hats (check your price
sheet or website for latest design and colors
available). Hats available in Realtree Camo™.
L
A
T
I
G
F
I
D OO
R
P
Bowjax Inc.
18544 Rimrock Rd.
Hayden, ID 83835
(208) 762-3692
(208) 762-4297 fax
Customer Service / Sales:
[email protected]
www.bowjax.com
Our company
is built on tenacity,
credibility and
great customer service!
Made
in the
USA