Symphony Kitchen Spec

Introduction
Symphony’s kitchen ranges have been specifically designed to
meet the needs of today’s house builders. Manufactured from top
quality materials and hardwearing components, the cabinets will
retain their good looks and efficient operation throughout their life,
when installed properly and used normally.
CONTENTS
Accessories
32 - 35
Elevations
06
Peninsular Wall Units
22
Base Open Display Units
23
Filler Panels
27- 28
Pilasters
26
Base Oven Housings
14
Framed Glazed Units
22
Plinths
27
Base Units
14
Fridge/Freezer Housings
19
Sink Units
14
Blender Panels
27 - 28
Friezes
26
Spice Drawers
24 - 25
Boiler Housings
20
Gallery Rails
25
Standard Colour Specification 08 - 11
Bridging Units
20
General Information
04
Wall Open Display Units
23 - 24
Cabinet Specification
12
Guidance Notes
38 - 39
Wall Units
14 - 15
Canopies
20
Hob Units
14
Wine Rack Units
24
Care and Attention
05
Installation
36 - 37
Wing End Units
25
Corner Base Units
13
Integrated Appliance Doors
20
Worktop Dresser Units
21
Corner Posts
26
Larder & Broom Units
15
Corner Sink Base Units
13
L Shape Corner Base Units
13
Worktops & Worktop
Accessories
30 - 31
Corner Wall Units
14 - 15
Midheight Units
19
Cornice and Pelmet
29
Ordering Checklist
03
Cubic Capacities
07
Oven Housings
16 - 18
All dimensions in the specification document are in millimetres.
02
ORDERING CHECKLIST
Please check through the list below
to ensure we have all the information
we need to supply your exact
requirements.
GENERAL
• Give details of the delivery site address, including
development names (where applicable), site phone
number and name of site contact.
• Specify your required week commencing
delivery date.
• Corner base units - ensure that the appropriate
codes for style and variation have been given.
• Appliance housings - orders must include the
manufacturer's name and the model number of the
appliance to be fitted, together with the aperture
size if known.
500 DEEP UNITS
The majority of base units and broom/larder units
are also available as 500mm deep (15mm only). Please
contact your local Symphony representative or
Symphony’s sales office for further details.
• Give your Symphony quotation reference number
and Symphony CAD drawing number
(if applicable).
WORKTOPS
UNITS
• If your requirements are complicated,
include a detailed plan showing dimensions,
cut out positions and sizes and places where
worktops abut.
• State the range and finish.
• State 15mm Standard, 18mm Excel or 18mm Revo.
• State handle/trim option if applicable.
• State the full unit code for each item.
• Give the appropriate unit handings where required.
See the notes on page 4.
• State cornice/pelmet style.
• If 170° hinges are required (which carry an extra
cost), please specify. Note that 90° (110° for 18mm
cabinets) hinges will otherwise be supplied.
PLEASE NOTE
• The illustrations in this booklet are intended as
representations only and are not necessarily
correctly scaled, proportioned or detailed.
• All sizes given are nominal. If exact unit, door or
other dimensions are required, please contact
your local Symphony representative or contact
Symphony’s Private Development Division Sales
Office on 0870 120 8000.
• All units are manufactured within industry
standards for dimensional tolerance.
• State style, colour, thickness and length.
See page 30 & 31 for details.
• If you require Mason Mitre Joints, please refer
to page 30. Alternatively contact your local
representative or contact Symphony’s Private
Development Division Sales Office on
0870 120 8000.
SINK TOPS
• Give the unit code, the handing of the drainer and
the colour required (if applicable).
• Waste and overflow kits - specify if required.
• Accessory packs - specify if required.
ACCESSORIES/HANDLES
• Unless specified otherwise the “standard option”
for cornice/pelmet, handles, etc. will be provided,
see pages 8, 9, 10, & 11.
STAINLESS STEEL FEATURE UNITS
Available with our contemporary ranges, please
add suffix ‘XC’ when specifying stainless steel
frontals with these ranges. (Wall units, base units,
pan drawer units.)
BOSTON BLACK ACCENT DOORS
Available with Boston, Maine and Minneapolis
(chunky bar handle only). Please add suffix BC when
specifying. (Wall units, base units, pan drawer units.)
• If splays are required for base wing ends, specify
left or right hand end (see page 30).
IMPORTANT
Symphony’s corner post is designed to avoid
handle clash and requires an additional allowance
in both floor space and worktop.
This is frequently overlooked, and failure to do so
will result in problems on-site.
If you require any additional information or
assistance please contact your local Symphony
representative or Symphony’s Private Development
Division Sales Office on 0870 120 8000 or
fax 0870 835 5999.
SYMPHONY CANNOT ACCEPT RESPONSIBILITY
FOR HANDLE CLASH IF NON STANDARD HANDLES
ARE CHOSEN.
PLEASE REFER TO PAGE 13 FOR FULL DETAILS OF
CORNER ARRANGEMENTS.
03
GENERAL INFORMATION
CONSTRUCTION
15mm Box On Legs (BOL)
Side panels, bases, shelves and plinths are
manufactured from 15mm high density chipboard.
Muntins, rails and drawer support rails on double
base units are manufactured from PVC or foil
wrapped MDF. Cabinet interiors are supplied in white.
Open display and feature units are manufactured
from 18mm high density chipboard and feature
concealed hanging brackets. All end support panels
are manufactured from 15mm high density chipboard.
15mm cabinets are supplied on legs (white, pear,
blonde oak, walnut and metallic).
18mm Excel
Side panels, bases, shelves and rails are manufactured
from 18mm high density chipboard. Plinths are
manufactured from 15mm chipboard, muntins and
drawer support rails on double base units are
manufactured from 52mm x 36mm section foil
wrapped MDF. All units have inset fitted backs.
Vulnerable cabinet edges are lipped to resist
moisture seepage into the panels. All 18mm cabinets
are supplied on adjustable legs. All units have fully
colour co-ordinated cabinets which removes the
need for additional end panels.
Standard Colour Specification
See charts on pages 8, 9, 10 & 11 for standard colour
specification.
Melamine Faced Chipboard
All chipboard used in manufacture complies with
BS EN 312-3(P2) and has a minimum density of
650 kilograms per cubic metre. The melamine
impregnated paper used for cabinets is 80 grams per
square metre.
Drawer System
A 3 metal sided drawer box with a 15mm chipboard
base with parallel guides and a 30kg loading capacity
which complies with BS6222 Standards.
Hinges
90° concealed hinges, fully adjustable with built-in
catches, are fitted as standard to all 15mm units.
If specified, 170° concealed hinges are available at
extra cost. The 18mm Excel range features 110°
3-way adjustable clip-on hinges.
Metal Fittings
All metal fittings and screws used in manufacture
are plated.
Wirework
All wirework used in the ranges is finished to
complement the cabinet colours.
Plinths
See page 27 for details and pages 8, 9, 10 & 11 for
standard colour specification.
Continuous plinth needs to be ordered separately.
04
Frontal Options
All Symphony base units are available in full height
door or door and drawer formats, with the exception
of some specialised units such as pull out pan
drawer units.
Suffix Letters
Any letters following the number code indicate a
variant of the type as follows:
A
B
Cabinet Front Edge Lipping
All front edge lipping is co-ordinated to
exterior finish.
Worktops
Worktops are constructed from laminate bonded to
chipboard and are available in 30mm and 40mm
bullnose and 40mm PVC edged styles. Please refer to
page 30 & 31 for details.
Glazed Wall Units and Feature Units
Styles of glazed units, dresser units and open display
units vary according to range. Glazing/leading
references for glazed units are available in the
Symphony Brochure.
SHELF SUPPORTS
15mm
Shelves are supported on white plastic injection
moulded shelf clips and transparent for glass
shelf units.
18mm Excel
Shelves are supported on metal shelf clips.
C
Variations of corner base unit or
appliance housing formats
D
E
F - Full height door base unit
D - Drawer line base unit
DD - Single base unit or corner base unit with a
dummy drawer
DAI - Double base unit with two dummy drawers
DAC - Double base unit with one dummy drawer
BO - Corner base unit with no corner post
BS - Corner base unit with dummy drawer and no
corner post
Unit Dimensions
All dimensions are expressed as follows:
Width - side to side
Depth - front to back
Height - top to bottom
HANDINGS
All dimensions in this document
are shown in millimetres
Many units are described as left or right handed.
Handings should be expressed as if looking at the
unit from the front.
TOLERANCE ALLOWANCES
Handings required are:
The side of the hinge on single units
(e.g. left hand hinged)
The side of the blanked end of corner units
(e.g. left hand blanked)
The position of the drainer on sink units
(e.g. left hand drainer)
The end position of a base wing end unit
(e.g. left hand end)
The side of a dummy drawer on a double base unit
(e.g. left hand side)
UNIT CODES
Prefix Letters
These indicate the type of unit, such as BU for base
unit; WU for wall unit; BR for broom unit; LU for
larder unit; OH for oven housing unit.
Numbers
The numbers indicate the width of the unit followed
either by the depth, or in case of wall units, the
height. For example a WU1056 is a wall unit 1000mm
wide and 561mm high. A BU56 is a base unit 500mm
wide and 600mm deep.
Plaster allowances vary depending on the type of
finish used. Unless instructed otherwise of a
particular customer’s requirement, design will allow
30mm per wall on dry lining and dot & dab, 12.5mm
per wall on stud walls with taped joints, and 15mm
per wall on skimmed stud walls.
Symphony’s Design Department will allow 50mm
wall to wall building tolerance. This allows for extra
length on worktops and the distance units finish from
a wall. Where a freestanding appliance terminates a
run against a wall allow 620mm minimum for the
appliance (600mm for the appliance and 20mm for
skirting boards) plus the required building tolerance
(see above paragraph).
CARE AND ATTENTION
BACKGROUND
Symphony uses only the highest quality timbers in
the production of its solid and veneered doors,
drawer frontals and accessories.
Symphony adheres to exacting environmental
standards, and guarantees the sustainable sources of
its timbers.
Care and Protection
It is important that you treat all frontals, particularly
timbers, with care, in order that they maintain their
good looks and performance.
If scratches do occur, an application of furniture
polish or wax will usually repair the situation. Do not
allow water to stand on timber surfaces, always wipe
off immediately.
Never use abrasive cleaners or strong chemicals on
furniture. Clean melamine and laminates with a damp
cloth, warm water and a mild detergent.
Worktops
On gloss finish worktops, scratches arising in
everyday use may be more visible due to the greater
amount of light reflected from the
gloss surface.
Timber Characteristics
As a natural material, wood reflects the endless
variety of grains and textures found in nature and
such variances must be expected. All timbers mellow
when exposed to sunlight, so a colour change is
possible. Whilst such definitive characteristics make
them a perfect vehicle for furniture design, it is
important that you treat them with care, and
eliminate the risk of contact with sharp or heavy
objects, “scratching”, exposure to chemicals, etc,
before, during and after installation.
Oak, particularly European oak, is a finely grained,
matured timber, notable mainly for its stability and
straight graining. It is one of the furniture industry’s
favourite timbers, and can be used in a variety of
styles and stained to a range of colours. It is
traditionally the craftsman’s ideal timber to work
with. It will however mellow with age, and a change
in colour is possible.
Birch occurs largely in Northern & Eastern Europe.
It is devoid of any conspicuous structural features
but gains its character from random, almost circular
graining. In its raw state it has a smooth, light and
bright surface, easily replicated in its finished format
with the application of durable semi matt lacquer
and buffed to a sheen.
Cabinet/Frontal Colour Consistency
Timbers and veneers are natural materials and are
subject to the variations in colours and grain
differences that nature promotes. All timbers feature
small graining marks and knots. These are part of the
timber’s natural properties and do not represent
faults in the door or drawer.
PVC, Melamine and laminates are synthetically
produced, therefore it is virtually impossible to
guarantee a totally accurate match between
timber/timber veneered frontals and accessories.
Notwithstanding the difficulties involved,
Symphony endeavours wherever possible to produce
the closest match that manufacturing and finished
technology allow. Timbers also mellow over time,
but as the cabinet material does not, this could cause
some longer term colour discrepancy. A slight
difference in colour between different components
does not in itself mean that the product is not of
satisfactory quality.
05
ELEVATIONS
720mm
NB: Base cabinet height to underside of worktop is 870mm. Actual base unit
cabinet depth is 470mm or 570mm. (500mm or 600mm with worktop.)
Actual wall unit cabinet depth is 285mm.
900mm (18mm Excel only)
NB: Base cabinet height to underside of worktop is 870mm.
Actual base unit cabinet depth is 570mm. (600mm with worktop.)
Actual wall unit cabinet depth is 285mm.
06
CUBIC CAPACITIES
Cubic Capacities (m 3) 15mm Cabinets
WIDTH
UNIT
300mm
400mm
500mm
600mm
800mm
1000mm
1200mm
600mm deep
0.10
0.13
0.17
0.20
0.27
0.34
0.42
561mm high
0.04
0.06
0.07
0.08
0.11
0.14
-
724mm high
0.05
0.07
0.09
0.11
0.15
0.18
-
2100mm high
0.30
-
0.49
0.55
-
-
-
561mm high
-
-
-
0.11
-
-
-
724mm high
-
-
-
0.14
-
-
-
Over Cooker Hood Units
300mm high
-
-
-
0.04
-
-
-
Tall Appliance Housings
2100mm high
-
-
-
0.55
-
-
-
300mm
400mm
500mm
600mm
800mm
1000mm
1200mm
600mm deep
0.09
0.13
0.16
0.20
0.27
0.34
0.41
724mm high
0.05
0.07
0.08
0.10
0.14
0.18
-
Base Units
Wall Units
Broom & Larder
Angle Corner Wall Units
Cubic Capacities (m 3) 18mm Cabinets
WIDTH
UNIT
Base Units
Wall Units
Broom & Larder
Angle Corner Wall Units
Over Cooker Hood Units
Tall Appliance Housings
900mm high
0.06
0.08
0.11
0.13
0.17
0.22
-
2100mm high
0.25
-
0.44
-
-
-
-
2276mm high
-
-
0.48
-
-
-
-
724mm high
-
-
-
0.13
-
-
-
900mm high
-
-
-
0.17
-
-
-
300mm high
-
-
-
0.04
-
-
-
2100mm high
-
-
-
0.54
-
-
-
-
0.59
-
-
-
2276mm high
-
-
07
STANDARD COLOUR SPECIFICATION
08
STANDARD COLOUR SPECIFICATION
09
STANDARD COLOUR SPECIFICATION
10
STANDARD COLOUR SPECIFICATION
11
CABINET SPECIFICATION
15mm Cabinet
Wherever you’re building, whatever the style and budget you’re working to, Symphony has a range of cabinet specifications and door styles to fit the bill.
As well as our 15mm cabinet construction - tried, tested and approved by the UK’s leading specifiers - we can also provide our Excel specification,
with 18mm cabinet construction, fully colour co-ordinated and wall hanging brackets.
15mm Wall Unit Specification
2
1
3
4
7
1. 3-way fully adjustable all
metal hinge 90°
(or 170° option)
2. 2 wall unit heights
5
3. 15mm cabinet - to BS EN
312-P2
8
6
4. Hardboard back
with horizontal fixing rail
5. Under shelf support for
strength
6. Internal cabinet finished
in white
7. 15mm shelving with plastic
shelf support
8. Co-ordinated front edge
lipping to match external
cabinet finish
2
3
15mm Base Unit Specification
4
1. Fully adjustable drawer front
for perfect alignment
1
2. 66mm void to rear providing
easy installation around
pipework and plumbing
5
7
6
8
13
3. Removable hardboard back
allows easy access should a
problem arise after installation
9
10
12
4. 15mm RAL 9001 faced
chipboard drawer base
8. Internal cabinet finished
in white
5. Durable 3 metal sided
drawer box
9. Cabinet lipped all round to
prevent water ingress
6. 3-way fully adjustable all
metal hinge 90° (or 170°
option) for perfect alignment
10. Continuous plinth
7. 15mm cabinet - BS EN 312-P2
18mm Excel Cabinet
1
18mm Excel Wall Unit
Specification
5. 18mm cabinet with interior
and exterior fully co-ordinated
1. Concealed fully adjustable
wall hanging brackets
6. 18mm shelving
2. One piece unit back
4
3
Wall Hanging
Bracket
5
6
7
8
18mm Excel Base Unit
Specification
1
2
3
4
1. Inset fitted back with void
of 66mm for easy access to
pipes, etc.
2. 15mm chipboard drawer base
6
5
3. Fully adjustable drawer front
for perfect alignment
7
11
3. 2 wall unit heights
7. Metal shelf supports
8. Cam & dowel construction for
extra rigidity
4. 3-way fully adjustable allmetal clip-on hinge - 110°
(or 170° option) for perfect
alignment
4. Durable 3 metal sided drawer
box. REVO silent system
available as optional extra*
8. Adjustable legs provide
easy installation
(min. 140mm - max. 175mm)
5. Cam & dowel construction
9. Colour co-ordinated clip-on
continuous plinth for flush
floor level fit
6. 3-way fully adjustable
all-metal clip-on hinge for
perfect alignment - 110°
(or 170° option)
7. 18mm cabinet with interior
and exterior fully co-ordinated
8
12. Adjustable legs provide easy
installation
13. Cam & dowel construction for
extra rigidity
11
2
11. Optional plinth dust seal
10. Optional plinth dust seal
11. Fully co-ordinated front edge
lipping matches cabinet
exterior
9
10
* REVO Silent System
BS 6222 Part 2
Level H
As well as being far quieter to open and close than standard drawers, Revo Silent System is a fully extendable
drawer system, giving increased storage space. Please contact your business manager for full details.
12
KM31495
CORNER BASE UNITS
All corner base units have centre hung doors with 90°
hinges. Corner posts and blanking panels are fitted as
standard. On corner base units with a corner post, a
blanking panel covers the void of the unit.
Space out from return wall as
appropriate (see below)
Description
CS106DC
Corner Sink Unit 1000 x 600 x 870, 600 door
L SHAPE CORNER BASE UNIT
A 600mm colour co-ordinated blanking panel is fitted
where corner posts are NOT required - e.g. when the
blank abuts a void for a freestanding appliance or
tray space.
A corner unit with either a shelf or a revolving
carousel.
NB: When designing or specifying
IMPORTANT: Please specify the handing of the side
of the blanking panel when ordering.
for a kitchen, allowance must be
made for the 30mm extension,
both in the unit positioning and
the sizes of the worktops.
CORNER POST
The Symphony corner post allows product ranges
with protruding handles to be offset by 30mm in
order to avoid possible clashing of drawer handles
in a corner. The corner post automatically spaces
out the units to the correct size across Dimension A.
However the fitter must remember to position the
corner unit (as appropriate) from the wall.
(See below).
Unit Code
The two doors are hinged on the end panels and
open to 170°. In order to facilitate transportation,
the unit is supplied in two halves and the carousel
or shelf must be fitted on site. Full height door or
door and dummy drawer front styles are available.
The dummy drawer fronts are fixed to the doors.
CORNER SINK BASE UNITS
1000mm and 1200mm corner base units can also be
supplied as corner sink units. To specify a corner sink
unit, change the prefix letters on the standard corner
base unit code from 'CB' to 'CS' as shown in the
example right.
Full Height Door
Door and
Dummy Drawer
Symphony’s range of corner base units allows wide flexibility in the positioning of corner units for the clearance of water or soil vent pipes when required. Please specify
the handing of the blanking panel side when ordering. For an explanation of handings see page 4.
800mm CORNER BASE UNITS
1000mm CORNER BASE UNITS
1200mm CORNER BASE UNIT
L SHAPE CORNER BASE UNITS*
*Supplied as 2 Rigid Parts
(only for use with 600mm wide units)
13
BASE UNITS
Full Height
Single Base Unit
870
One door, one shelf
570
Double Base Unit
Two doors, one shelf
Width
Code
300
400
450
500
600
BU36F*
BU46F*
BU456F
BU56F*
BU66F*
800
1000
1200
BU86F*
BU106F*
BU126F
Drawer Line
Single Hob/Sink
Base Unit
870
One door, one shelf,
one dummy drawer
Width
Code
600
BU66DDD
Width
Code
600
BOH66
570
Base Oven Housing
(supplied with 120mm fascia)
Drawer Line
Single Base Unit
One door, one drawer,
one shelf
870
570
Double Base Unit
Two doors, two drawers,
one shelf
Double Sink Base Unit
One dummy drawer,
one working drawer,
two doors, one shelf
Width
Code
300
400
450
500
600
BU36D
BU46D
BU456D
BU56D
BU66D
800
1000
1200
BU86D
BU106D
BU126D
1000
1200
SU106D
SU126D
900
Base Oven Housing
600
Drawer Base Units
Four Drawer
Base Unit
870
1000
1200
SU106DAI
SU126DAI
Width
Code
400
500
600
DU46D
DU56D*
DU66D*
600
800
1000
PD66D3*
PD86D3*
PD106D3*
600
800
1000
PD66D3CU
PD86D3CU
PD106D3CU
Width
Code
300
400
450
500
600
WU372*
WU472*
WU4572*
WU572*
WU672*
800
1000
WU872*
WU1072*
600
CWU672
570
Pan Drawer Base Unit
Double Sink Base Unit
BOH66D
(supplied flat pack with drawer)
Two pull-out drawers,
one drawer
Two dummy drawers,
two doors, one shelf
KBOH96
(supplied flat pack with
metallic fascia)
Curved Ribbed Aluminium
Drawer Packs
(Revo Box)
870
570
WALL UNITS
561mm (15mm Cabinet only)
Single Wall Unit
561
One door, one shelf
285
Double Wall Unit
Two doors, one shelf
Corner Wall Unit
o
One door, one shelf (170 hinges)
Blank end for corner returns
Diagonal Corner
Wall Unit
o
One door, one shelf (90 hinges)
Not suitable for use as a
terminating unit or alone
561mm wall units not available in 18mm Excel.
* If used as stainless steel accent door, use code with suffix XC.
14
Width
Code
300
400
450
500
600
WU356
WU456
WU4556
WU556
WU65
800
1000
WU856
WU1056
600
CWU656
630
DWU656
724mm
Single Wall Unit
One door, one shelf
(15mm Standard)
One door, two shelves
(18mm Excel)
724
285
Double Wall Unit
Two doors, one shelf
(15mm Standard)
Two doors, two shelves
(18mm Excel)
Corner Wall Unit
o
One door, one shelf (170 hinges)
(15mm Standard)
One door, two shelves
o
90 special hinges (18mm Excel)
Diagonal Corner
Wall Unit
o
One door, one shelf (90 hinges)
Not suitable for use as a
terminating unit or alone
630
DWU672
(2 spacer panels)
WALL UNITS
724mm
Width
Glazed Diagonal
Corner Wall Unit
One glazed door, one shelf
o
90 hinges. Not suitable for use
as a terminating unit or alone
Glazed Wall Unit
630
724
GDWU672
(inc 2 spacer panels)
900mm (18mm Cabinet only)
Single Wall Unit
900
One door, two shelves
285
724
One glazed door, one shelf
Code
400
500
GDU472
GDU572
500
PIWU572
Double Wall Unit
Two doors, two shelves
Width
Code
300
400
450
500
600
WU390
WU490
WU4590
WU590
WU690
800
1000
WU890
WU1090
600
CWU690
630
DWU690
285
Pierced Wall Unit
(Aspen only)
Corner Wall Unit
One door, two shelves
o
170 hinges
Diagonal Corner
Wall Unit
One door, two shelves
o
(90 hinges) Not suitable for use
as a terminating unit or alone
(inc 2 spacer panels)
Glazed Wall Unit
One glazed door, two shelves
Pierced Wall Unit
(Aspen only)
500
GDU590
500
PIWU590
Glazed door styles and leading vary according to range.
LARDER & BROOM UNITS
2100mm
Larder Unit
Two doors,
four shelves
1228mm door
2100
720mm door
Width
Code
2276mm (18mm Cabinet only)
300
500
600
LU36
LU56
LU66
Two doors,
four shelves
Larder Unit
570
Broom Unit
Two doors,
three shelves
Pull Out
Larder Unit
1228mm door
2276
896mm door
Width
Code
300
500
600
LU3623
LU5623
LU6623
300
500
600
BR3623
BR5623
BR6623
300
PL3623
570
1228mm door
720mm door
300
500
600
BR36
BR56
BR66
1228mm door
300
720mm door
PL36
Broom Unit
Two doors,
four shelves
Pull Out
Larder Unit
1228mm door
896mm door
1228mm door
896mm door
15
OVEN HOUSINGS
Aperture
Height
2100mm
Code
600
Microwave
& Single Oven
Housing
Top: 459
Lower: 595
2100
OH661A
72mm fascia
296mm
pull-out drawer
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
1196 Max
OH661B
296mm
pull-out drawer
450mm door
72mm fascia
47mm fascia
Top: 484
Lower: 595
OH661C
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
Double Oven
Housing
450mm door
72mm fascia
Double Oven
Housing
296mm
pull-out drawer
557mm door
450mm door
47mm fascia
450mm door
120mm fascia
997 Max
OH662A
Double Oven
Housing
450mm
pull-out drawer*
OH662B
450mm
pull-out drawer*
450mm pull-out door
drawer*
890 Max
OH663A
865 Max
OH663B
817 Max
OH663C
Single Oven
or Microwave
Housing
595 Max
OH664A
547 Max
OH664B
595 Max
OH665A
557mm door
72mm fascia
159mm drawer
557mm door
Top: 355
Lower: 595
OH662C
450mm pull-out
drawer*
450mm door
72mm fascia
72mm fascia
OH662G
557mm door
1042 Max
450mm door
47mm fascia
47mm fascia
Top: 360
Lower: 595
450mm pull-out
drawer*
450mm door
47mm fascia
OH661D
OH662E
450mm door
72mm fascia
557mm door
1151 Max
Top: 330
Lower: 595
450mm
pull-out drawer*
296mm
pull-out drawer
* One wirework basket and one metal sided basket.
16
450mm door
47mm fascia
72mm fascia
450mm door
47mm fascia
450mm door
Microwave
& Single Oven
Housing
2100
570
450mm door
Microwave
& Single Oven
Housing
Code
600
450mm door
72mm fascia
570
Aperture
Height
2100mm
Single Oven
or Microwave
Housing
557mm door
120mm fascia
159mm drawer
557mm door
Top: 315
Lower: 585
OH662D
Single Oven
or Microwave
Housing
720mm door
72mm fascia
557mm door
OVEN HOUSINGS
Aperture
Height
2100mm
Code
Aperture
Height
2276mm (18mm Cabinet only)
600
Code
600
720mm door
Single Oven
or Microwave
Housing
720mm door
2100
120mm fascia
547 Max
OH665B
557mm door
Microwave
& Single Oven
Housing
570
Single Oven
or Microwave
Housing
Single Oven
or Microwave
Housing
557mm door
72mm fascia
Top: 450
Lower: 890
OH666A
Microwave
& Single Oven
Housing
557mm door
72mm fascia
296mm
pull-out drawer
557mm door
72mm fascia
557mm door
120mm fascia
72mm fascia
Top: 380
Lower: 890
OH666B
720mm door
47mm fascia
457 Max
OH667A
720mm door
120mm fascia
384 Max
OH667B
720mm door
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
Microwave
& Single Oven
Housing
720mm door
Microwave
Housing
Top: 459 OH66231A
Lower: 595
296mm
pull-out drawer
720mm door
720mm door
Microwave
Housing
47mm fascia
570
720mm door
Microwave
Housing
2276
72mm fascia
72mm fascia
360 Max
OH667C
Microwave
& Single Oven
Housing
720mm door
1196 Max OH66231B
Top: 479 OH66231C
Lower: 595
296mm
pull-out drawer
557mm door
120mm fascia
1148 Max OH66231D
296mm
pull-out drawer
557mm door
120mm fascia
997 Max
OH66232A
450mm
pull-out drawer*
557mm door
72mm fascia
1049 Max OH66232B
450mm
pull-out drawer*
450mm door
720mm door
Double Oven
& Microwave
Housing
Top: 450
Lower: 890
OH668A
120mm fascia
Microwave
& Single Oven
Housing
450mm
pull-out drawer*
Top: 347 OH66232C
Lower: 595
450mm door
Double Oven
& Microwave
Housing
120mm fascia
Top: 380
Lower: 890
120mm fascia
OH668B
Microwave
& Single Oven
Housing
720mm door
47mm fascia
Top: 326 OH66232D
Lower: 585
450mm
pull-out drawer*
*One wirework basket and one metal sided basket.
17
OVEN HOUSINGS
Aperture
Height
2276mm (18mm Cabinet only)
Code
2276mm (18mm Cabinet only)
600
Double Oven
Housing
2276
450mm
pull-out drawer*
Single Oven
or Microwave
Housing
557mm door
72mm fascia
72mm fascia
Top: 360 OH66232G
Lower: 595
450mm pull-out
drawer*
557mm door
120mm fascia
Single Oven
or Microwave
Housing
890 Max
OH66233A
Single Oven
or Microwave
Housing
840 Max
OH66233B
Microwave
Housing
OH66236A
547 Max
OH66236B
463 Max
OH66237A
384 Max
OH66237B
360 Max
OH66237C
720mm door
47mm fascia
805 Max
OH66233C
608 Max
OH66234A
159mm drawer
557mm door
Microwave
Housing
Microwave
Housing
896mm door
72mm fascia
72mm fascia
Please Note: 1381, 2100 and 2276 Appliance Housings
72mm fascia
557mm door
896mm door
120mm fascia
720mm door
720mm door
896mm door
72mm fascia
896mm door
47mm fascia
720mm door
720mm door
72mm fascia
72mm fascia
159mm drawer
557mm door
557mm door
120mm fascia
720mm door
557mm door
18
605 Max
557mm door
72mm fascia
896mm door
557mm door
Single Oven
or Microwave
Housing
OH66235B
896mm door
720mm door
Single Oven
or Microwave
Housing
120mm fascia
570
Double Oven
Housing
Single Oven
or Microwave
Housing
2276
557mm door
557mm door
Double Oven
Housing
547 Max
896mm door
Top: 343 OH66232E
Lower: 595
570
Microwave
& Single Oven
Housing
Code
600
720mm door
Microwave
& Single Oven
Housing
Aperture
Height
546 Max
601 Max
OH66234B
OH66235A
Symphony can supply appliance housings to accommodate a wide selection of built-in
appliances manufactured by Electrolux Group. For appliances supplied by other
manufacturers, please make sure sizes are checked before ordering. The appliance
manufacturer and the model number must be specified when ordering. Units can be hinged
left or right. If not specified, refrigeration housings will be supplied right hand hinged and
oven housings left hand hinged.
IMPORTANT Symphony appliance housings are vented through the plinth. Please check the
appliance manufacturer’s instructions as to the venting requirements for any particular
appliance. All appliances must be fitted strictly in accordance with the manufacturer’s
instructions. A ventilation grill, code: VENTGRILL, can be ordered separately. The ventilation
grills are to aid ventilation only and manufacturer’s instructions on ventilation arrangements
should be followed at all times.
1381 appliance housings must be vented through the top of the unit using a VENTGRILL.
FRIDGE FREEZER HOUSINGS
2100mm
One appliance
behind top door,
one appliance
behind bottom
door
Width
Code
2276mm (18mm Cabinet only)
IF66A
One appliance
behind top door,
one appliance
behind bottom
door
1018mm door
600
2100
930mm door
Width
Code
600
IF6623A
600
IF6623B
600
IF6623C
600
IF6623D
600
IF6623E
72mm fascia
2276
1018mm door
1018mm door
570
570
One appliance
behind bottom
door
720mm door
One appliance
behind bottom
door
600
896mm door
1228mm door
IF66B
1228mm door
296mm door
One appliance
behind
middle door
296mm door
One appliance
behind
middle door
930mm door
600
930mm door
896mm door
IF66C
1228mm door
720mm door
One appliance
behind top and
bottom door
896mm door
1228mm door
One appliance
behind top and
bottom door
600
IF66D
720mm door
296mm door
One appliance
behind bottom
and middle door
72mm fascia
1018mm door
720mm door
MID HEIGHT UNITS
1381mm (18mm Cabinet)
Width
Code
1381mm (18mm Cabinet)
Width
Code
600
DOH6613
600
IF6613
600
MOH6613D3
500
TLU5613SL
47mm fascia
Deep Pan Unit
4 drawers
120mm fascia
600
1381
PD66D4
276mm drawers
Double Oven
Housing
296mm
pull-out drawer
570
Larder Unit
1228mm door
500
LU5613
72mm fascia
Single Oven
Housing
600
SOH6613
600
SOH6613A
557mm door
Appliance
Housing
Microwave or
Coffee Machine
Housing
930mm door
296mm
pull-out drawer
47mm fascia
159mm drawer
276mm drawer
276mm drawer
72mm fascia
Single Oven
& Microwave
Housing
72mm fascia
Tambour
Larder Unit
1235mm
roll down door
120mm fascia
19
BRIDGING UNITS
Width
Code
Width
Code
600
DRIC
Width
Code
600
BH612
450
Over Cooker
Hood Unit
600
OCH63
Width
Code
600
KBHC67
Door Front for
Integrated Cooker Hood
285
BOILER HOUSINGS
Boiler Housing Cabinet
Door needs to be ordered
separately
720
(Supplied Flat Pack)
Dresser Boiler Housing
Door included
1190
18mm Cabinet)
400
Boiler Housing Unit
Door included. Always supplied
in 15mm apart from Mezzo
(Supplied Flat Pack
400
930
600
BH69
400
CANOPIES
Corner Canopy
Supplied in chipboard to be
finished on site
Corner Canopy
Size
Code
1072 x 1072
2046
972 x 972 x 450
972 x 972 x 570
CANCNR45
CANCNR57
Size
Code
800 In-line Canopy
800 x 460 x 450
800 x 460 x 570
CANIL8
CANIL857
1000 In-line Canopy
1000 x 460 x 450
CANIL10
Please note that cooker hood ducting is not supplied with the appliance or canopy unit.
Please order separately.
600 In-line Canopy
600 x 411 x 450
CANIL6
Canopy styles vary according to range.
INTEGRATED APPLIANCE DOORS
Integrated
Dishwasher Door
(undrilled for hinges)
Integrated
Full Height Door
557
(undrilled for hinges)
720
Integrated Drawer
Line Door
720
(undrilled)
20
Width
Code
596
DRDL6UDASS
Slimline Full Height
Dishwasher Door
(drilled)
596
DRFH6UDASS
Slimline Drawer Line
Dishwasher Door
(drilled)
596
IDFD2ASS
Width
Code
720
450
500
DRFH45ASS
DRFH5ASS
720
450
500
IDFD45ASS
DRDW5ASS
WORKTOP DRESSER UNITS
1190mm
Three Spice Drawers
One glazed door, three glass
shelves,three spice drawers
Width
500
1190
Code
WDU512
WDUG512A
(Gloss White)
1366mm (18mm Cabinet only)
Three Spice Drawers
One glazed door, three glass
shelves, three spice drawers
570
Single Spice Drawer
One glazed door, three glass
shelves,one spice drawer
Gallery Rail
500
500
500
One roll down door
Pierced Dresser Unit Three Spice Drawers
One pierced door, three glass
shelves, three spice drawers
(Aspen only)
Pierced Dresser Unit Single Spice Drawer
One pierced door, three glass
shelves, one spice drawer
(Aspen only)
Pierced Dresser Unit Gallery Rail
One pierced door, three glass
shelves, gallery rail
(Aspen only)
Code
500
WDU513A
WDUG513A
(Gloss White)
500
WDU513B
WDUG513B
1366
285
One glazed door, three glass
shelves, gallery rail
Tambour Unit
Width
500
WDU512B
WDUG512B
(Gloss White)
One glazed door, three glass
shelves,one spice drawer
WDU512C
WDUG512C
(Gloss White)
One glazed door, three glass
shelves, gallery rail
TWDU512SL
TWDUG512SL
(Gloss White)
PIWDU512A
500
PIWDU512B
500
PIWDU512C
Single Spice Drawer
Gallery Rail
Pierced Dresser Unit Three Spice Drawers
One pierced door, three glass
shelves, three spice drawers
(Aspen only)
Pierced Dresser Unit Single Spice Drawer
One pierced door, three glass
shelves, one spice drawer
(Aspen only)
Pierced Dresser Unit Gallery Rail
One pierced door, three glass
shelves, gallery rail
(Aspen only)
Tambour Unit
One roll down door
(Gloss White)
500
WDU513C
WDUG513C
(Gloss White)
500
PIWDU513A
500
PIWDU513B
500
PIWDU513C
500
TWDU513SL
TWDUG513SL
(Gloss)
Styles of frames, leading, spice drawers and glazing vary according to range.
Please specify left or right handing when ordering.
21
FRAMED GLAZED UNITS
Metallic Effect
Single Wall Unit
Width
400
500
500
724
or
900
Code
GDU472SL
GDU572SL
GDU590SL
Aluminium
Width
400
500
500
GDU472XC
GDU572XC
GDU590XC
724
630
GDWU672XC
724
500
GPWU572XC
500
500
WDU512AXC
WDU513AXC
500
500
WDU512BXC
WDU513BXC
400
500
600
800
1000
OCH43XC
OCH53XC
OCH63XC
OCH83XC
CH103XC
724
or
900
Single Wall Unit
285
Diagonal Wall Unit
(400 door)
Peninsular Wall Unit
285
724
630
GDWU672SL
724
500
GPWU572SL
Diagonal Wall Unit
(400 door)
Peninsular Wall Unit
270
Worktop Dresser Unit Three Spice Drawers
270
500
WDU512ASL
500
WDU513ASL
(18mm Excel only)
1190
or
1366
Worktop Dresser Unit Three Spice Drawers
1190
or
1366
285
Worktop Dresser Unit Single Spice Drawer
285
500
WDU512BSL
500
WDU513BSL
(18mm Excel only)
1190
or
1366
Worktop Dresser Unit Single Spice Drawer
1190
or
1366
285
Pan Drawer Unit
Three pull-out drawers
285
870
800
PD86D3SL
400
500
600
800
1000
OCH43SL
OCH53SL
OCH63SL
OCH83SL
OCH103SL
Glazed Cooker Hood
300
570
Glazed Cooker Hood
Code
300
285
285
PENINSULAR WALL UNITS
Width
Corner Unit
Supplied rigid with door.
18mm Excel supplied with
spacer panel
724
Code
600
PCWU672
(Supplied Flat Pack)
Width
Code
Support Frame
25
185 1765 Max
PWSF
Support Strap
25
50
1765 Max
PWSS
330
PWSP372
285
Solid Unit
Solid door to both sides
724
500
PWU572
(Supplied Flat Pack)
270
Spacer Panel
(18mm only)
Glazed Unit
Glazed door to both sides
724
500
GPWU572
(Supplied Flat Pack)
270
Support Legs
724
20
22
724
225
PWSL72
18mm only
A maximum of three wall unit cabinets may be used. These units may
be used alone, without a corner wall unit. The standard 15mm corner
wall unit is supplied with two corner posts and 18mm Excel is
supplied with one corner post and a blanking panel, enabling further
units to be run off this. The peninsular support frame, strap and legs
must be used when this occurs, as shown. There is a 300mm door
available which may be planted onto the corner wall unit end or onto
the end of the peninsular wall unit run. Two are required, one for
each side of the unit. A maximum of three 500mm wall units can be
used together with the 630mm corner unit, giving an overall
maximum run size of 1830mm. Reduce support frame & strap to suit
the unit dimensions chosen.
BASE OPEN DISPLAY UNITS
Width
Style 1
Frieze & Gallery Rail
Code
Width
500
ODMB15
ODGB15
(Gloss)
Style 10
Plate & Wine Rack
500
ODMB95
ODGB85
(Gloss)
Wicker Basket Unit
870
Code
500
ODMB105
ODGB105
(Gloss)
500
WBU56D
285
Style 8
Plate Rack
500
Style 9
Wine Rack
ODMB95
ODGB95
(Gloss)
WALL OPEN DISPLAY UNITS
561mm
Wall Open Unit
Width
561
500
Code
ODU556
724mm
Wall Open Unit
285
Wall Open
Diagonal Unit
Code
500
ODU572
ODG572
(Gloss)
630
OWU672
(Melamine)
500
ODMW1572
ODGW1572
Gloss)
500
ODMW3572
ODGW3572
(Gloss)
500
ODMW5572
ODGW5572
(Gloss)
500
ODMW7572
ODGW7572
(Gloss)
724
285
Wall Open
Diagonal Unit
630
OWU656
Style 1
Frieze & Gallery Rail
500
ODMW1556
Style 1
Frieze & Gallery Rail
Style 7
Gallery Rail
500
ODMW7556
Style 3
Three Spice Drawers
Not suitable for use as
terminating unit or alone
Width
Not suitable for use as
terminating unit or alone. 18mm
Excel includes 2 spacer panels
Styles vary according to range.
Style 5
Frieze, Gallery Rail &
Three Spice Drawers
Style 7
Gallery Rail
23
WALL OPEN DISPLAY UNITS
724mm
Style 8
Plate Rack
Width
500
724
Code
ODMW8572
ODGW8572
(Gloss)
900mm (18mm Cabinets)
Wall Open Unit
285
500
Style 10
Plate & Wine Rack
Angled
Open Wall Unit 22.5°
Open unit only not available with door
Open Display
Unit Frame
Code
500
ODU590
ODG590
(Gloss)
630
OWU690
500
ODMW1590
ODGW1590
(Gloss)
500
ODMW3590
ODGW3590
(Gloss)
500
ODMW5590
ODGW5590
(Gloss)
500
ODMW7590
ODGW7590
(Gloss)
500
ODUFRAME90
900
285
500
Style 9
Wine Rack
Width
ODMW9572
ODGW9572
(Gloss)
ODMW10572
ODGW10572
(Gloss)
252
AWU2272
500
ODUFRAME
Wall Open
Diagonal Unit
Not suitable for use as
terminating unit or alone.
Includes 2 spacer panels
Style 1
Frieze & Gallery Rail
Style 3
Three Spice Drawers
Style 5
Frieze, Gallery Rail &
Three Spice Drawers
Style 7
Gallery Rail
Open Display
Unit Frame
Styles vary according to range.
WINE RACK & SPICE DRAWERS
Width
300
Base Wine Rack
870
Code
BWR3
BWRG3
(Gloss White)
Width
150mm
Spice/Wine Rack
285
Wall Wine Rack
(No plinth)
724
or
900
24
150
SPWR15
150
BU1506BAFXC
285
300
300
285
724
Code
WWR372
WWRG372
(Gloss White)
150mm Pull Out Basket
724
(Stainless steel frontal only)
WWR390
570
WINEGENERAL
RACK & SPICE
INFORMATION
DRAWERS
Width
Single Spice Drawer
(Dresser Units
Open Display Units)
Set of
Three Spice Drawers
Code
Width
Code
120
159
496
SPICE 1
112
Base/Wall Wine Rack
Spice Drawers
SPICE15*
* For use with 150mm wide spice/wine rack (SPWR15). Spice drawers are available with
finger pull fronts in Pearwood, Gloss White, Walnut, White, Mezzo, Blonde Oak,
Metallic.
140
153
(Dresser Units
Open Display Units)
SPICE 5
WING END UNITS
Width
570
285
Code
BWG36
870
(Gloss White)
Code
285
BWE36
BWE36G
(With gallery rail)
Base Wing End
Width
Square Wall Wing End
Blonde Oak
BWGG36
724
or
900
305
305
WWQ372
WWQ390
305
BWV3622
305
WWV37222
WWV39022
300
DBU36D45
DBU36F45
(With gallery rail)
570
Square
Base Wing End
305
BWQ36
Blonde Oak
Modern Base
Wing End
870
Blonde Oak, Pear
285
285
Wall Wing End
WWE356
WWE356G
285
(With gallery rail)
WWE372
WWE372G
561
or
724
(With gallery rail)
WWG372
Modern Wall
Wing End
Blonde Oak, Pear
724
or
900
45° Base Unit
870
(Gloss White)
WWGG372
(With gallery rail)
285
Tall Wall Wing End
WWE390
WWE390G
(400mm door)
(With gallery rail)
900
WWG390
(Gloss White)
WWGG390
Styles vary according to range.
(With gallery rail)
GALLERY RAILS
Width
Straight Timber
Gallery Rail
500
1200
Code
GALLODV5
GALL
Width
Wing End Timber
Gallery Rail (Set of 2)
Available in Blonde Oak,
Pear, White,Walnut, Metallic
and Mezzo
WALL
BASE
Code
GALLWWE
GALLBWE
25
FRIEZES
Width
Frieze
Depth
Height
500
500
–
–
–
–
1000
–
–
Code
FRIEZE5
FRIEZE5G
(Gloss White)
FRIEZE10
Frieze 10 available in White, Gloss White, Birch/Pear, Walnut, Blonde Oak & Mezzo
Styles vary according to range.
CORNER POSTS
1 5m m CABINET
Base Unit
560 Wall Unit
720 Wall Unit
900 Wall Unit
1 8m m CABINET
CPOSTBU
CPOSTSWU56
CPOSTTWU72
CPOSTTWU90
Base Unit
560 Wall Unit
720 Wall Unit
900 Wall Unit
LPOSTCBU18
LPOSTWU5618
LPOSTWU7218
LPOSTWU9018
PILASTERS
Size
Code
Stainless Steel
Base to floor 50 x 870
PIL1087SL
Fluted Pilaster
Base/Wall 100 x 1046
Dresser Unit 100 x 1366
Larder Unit 100 x 2276
FPIL1010
FPIL1013
FPIL1023
Base/Wall 100 x 1046
Dresser Unit 100 x 1366
Larder Unit 100 x 2276
BCPIL1010
BCPIL1013
BCPIL1023
Wall 100 x 900
Dresser 100 x 1366
Larder 100 x 2276
Base 100 x 870
CHPIL1010
CHPIL1013
CHPIL1023
CHPIL1087
Available in Oak
and Pear (Bromley) (cuttable)
Boxed Pilaster
Available in Birch/Pear
Chunky Pilaster
Available in Blonde Oak
Styles vary according to range.
26
PLINTHS
Size
Code
Available in White, Blonde Oak,
Pear (MFC), Metallic, Walnut,
Mezzo,
Gloss White,
Gloss Red, Black and Latte
2600
CONPLINTH
2550
2800
CONPLINTHG
CONPLINT28ZZ (Boston only)
Decorative Plinth
3000
DECPLINTH30
3000
DECPLINTH3SL
3200
CONPLINTHS
–
BRKPLINTH
Continuous Plinth
Available in Pear and Blonde Oak
Stainless Steel Effect
Plinth Seal
(Use with continuous plinth)
Plinth
Connector Bracket
(Use with continuous plinth)
FILLER, SHELVING AND BLENDER PANELS
Breakfast Bar Back Panels
MFC Back Panel
(not colour co-ordinated except Mezzo 18mm only)
Block End Support Panel
(not colour co-ordinated except Mezzo 18mm only)
Tray Platform
Size
Code
600 x 870 x 15
1200 x 870 x 15
1800 x 870 x 15
MFCBP687P
MFCBP1287P
MFCBP1887P
870 x 570 x 15
ES687P
ES687PM
(Metallic)
300 x 570
TSP3X6P
720 x 300
BSP372P
BSP372PM
(Metallic)
2220 x 570
3000 x 285
SHPANEL25
SHPANEL25M
(Metallic)
SHPANEL30
Base Unit
Tall Unit
Dresser Unit
Breakfast Bar Back
Wall Unit
PEBBU6
PEBLU621
PEBWDU312
BP1087PE
PEBWU390
Filler Panels
Flyover Shelf
Planked Blender Panels
Available in Blonde Oak
and Pear
27
FILLER, SHELVING AND BLENDER PANELS
Size
Code
–
ISP794
Infill Spacers
(Used in conjunction with
planked ends to keep units
in line)
Base Unit
Appliance Housing
Gloss White
Replacement
End Panel
Breakfast Bar
570 x 724
570 x 1954
600 x 2130
570 x 1954
600 x 2130
570 x 1954
600 x 2130
300 x 724
300 x 900
1800 x 870
BUEPG672
IFUEPG619
IFUEPG621
LUEPG619
LUEPG621
OHUEPG619
OHUEPG621
WUEPG372
WUEPG390
BBBPG1887
MFC
Gloss
Planked
700 x 2276
700 x 2276
700 x 2276
LUEP723
LUEPG723
PEBLU723
Larder Unit
Oven Housing
(18mm only)
Wall Unit
700mm
Deep Blender Panel
Luxury Shelving
Available in Pear, White,
Blonde Oak, Walnut,
Metallic and Mezzo
2600 x 305
Available in Wenge.
2600 x 305
SHPNL26227P
Available in Gloss Red, White,
Black and Latte
2422 x 307
SHPANL2422ZZ
2600 x 650
SHPANEL26622
Base Unit Framing Panels
Available in Pear, White,
Blonde Oak, Walnut,
Metallic and Mezzo
SHPNL266227P
Available in Wenge
2450 x 1050
Aluminium Curved
Ribbed End Panels
Decorative
Shelving Bracket
SHPANEL2622
2200 x 100
BRIBBED2410
(Blender)
CNREL2210CU
(Corner Element)
–
BRKDECSH
Wall Unit 920 x 307
Tall Unit 2400 x 600
Base Unit 920 x 600
Breakfast Bar 1800 x 920
BWU390ZZ
BLU623ZZ
BBU692ZZ
BBBP1892ZZ
4 brackets per shelf length
Boston Blender Panels
Available in Gloss Red, Black,
White and Latte
28
CORNICE AND PELMET
Traditional
Style Cornice
55mm
Traditional Style Pelmet
55mm
Universal Cornice
and Pelmet
35mm
Modern Tangent Cornice
45mm
Modern Tangent Pelmet
55mm
Veneered Coved Cornice
60mm
Plain Veneered Pelmet
55mm
Castellated Cornice
Attachment
20mm
Reversible
Veneered Pelmet
65mm
Available in plain/castellated
Light Baffle
Length
Code
3000
COR30P
(Foil Wrapped - Blonde Oak and Gloss White)
3000
UPS30P
(Foil Wrapped - Blonde Oak and Gloss White)
3000
CORPEL30
(Pear, Blonde Oak, White, Walnut, Metallic, Mezzo)
CORPEL30ZZ
(Gloss Latte, Gloss Black, Gloss White and Gloss Red)
3000
CORT30P
(Foil Wrapped - White, Blonde Oak,
Walnut, Metallic, Mezzo and Pear)
3000
UPST30P
(Foil Wrapped - White, Blonde Oak,
Walnut, Metallic, Mezzo and Pear)
3000
CORCOV30V
(Birch/Pear and Blonde Oak)
3000
UPS30V
(Blonde Oak)
3000
CORCATT30
(Birch/Pear)
3000
UPSC30VREV
(Birch/Pear)
3000
FLPS
29
WORKTOPS
MASON MITRE JOINTS
Bullnose worktops can also be supplied with a factory cut mitred joint and
jointing bolts for assembly on site.
WORKTOP CUTTING DETAILS FOR DIAGONAL
“BUILT-UNDER” OVEN HOUSING UNIT/
PAN DRAWER UNIT.
BULLNOSE WORKTOP MASON MITRE PLANNER
600mm deep - 3600mm max. length.
Double bullnose up to 900mm deep - 3600mm max. length.
Please allow an extra 23mm for male to female connections and an extra 30mm
for corner post situations.
BASE UNIT
600
BULLNOSE WORKTOP MASON MITRE PLANNER
650MM DEEP
X
1072
Y
804
Z
1137
NB: Z Dimension should be against a false wall
WORKTOP SPLAY ENDS
Worktops can be supplied cut to match base wing end units. Please specify left or
right hand end:
Please allow an extra 23mm for male to female connections and an extra 30mm
for corner post situations. Can be used in conjunction with 600mm deep mitres.
PVC EDGED WORKTOP MASON MITRE PLANNER
Use existing Worktop Mason Mitres for a selection of PVC edged worktops, with
the exception of 18, 19, 20, 44 and 45 which are not available due to radius ends.
BULLNOSE WORKTOP RADIUS END DIAGRAM
Maximum length for double bullnose up to 900mm deep - 3600mm.
Current Radius End Variations
30
WORKTOPS
Height
Bullnose Worktops
Double Bullnose
Worktops
Postformed
Upstands 12mm
Width
Max Length
Code
30
40
500 or 600
500 or 600
3600
3600
PF30
PF40
PFG40
(Gloss)
30
665 or 900
3000
DP30
40
665 or 900
3600
(900 only)
DP40
DPG40
(Gloss)
95
12
3000
PFUP3095
40
40
665
900
3600
3600
PV40
DV40
PVC Edged Worktops
Metallic, Multiplex, Everest Black,
Stardust, Riverside Beige,
Riverside Grey, Snow Spray,
Sand, Pearwood, Blonde Oak,
Palisander and Walnut
WORKTOPS ACCESSORIES AND JOINTING STRIPS
Edging Tape
‘L’ Shape Worktop
Jointing Strip
‘T’ Shape Worktop
Jointing Strip
White or Brown
Support Leg
Size
Code
30
40
WTEDG3
WTEDG4
30mm
thick
STRIPALP306
(Aluminium)
40mm
thick
STRIPALP4010
(Aluminium)
30mm
thick
STRIPALT306
(Aluminium)
40mm
thick
STRIPALT4010
(Aluminium)
870
LEGBAR
(60mm diameter)
870
CHRLEG
(25mm diameter)
LEGBARCX
(60mm diameter) (Deluxe)
30mm
40mm
STRIPALS306
STRIPALS4010
Chrome Support Leg
Aluminium End Cap
31
ACCESSORIES
Wirework
Code
Wirework
Code
DOORBASKTCH
(Pack of 2)
(c/w Runners)
WICKBASK
Magic Corner
(Left Hand)
Wicker Basket
Two Tier Bottle Rack
410
100
MCULCX
Single Tier Bottle Rack
DOORBASKSCH
100
Chrome Cookery
Book Support
(For use with midway rail)
(To be installed in CB106DA/FA
order opposite handing to CBU)
MCURCX
(Right Hand)
2 boxes
100
CBOOKSUPPCX
Chrome 3/4 Carousel
CAROBASKCX
700 dia
(315mm)
WRSHELF3CX
Extra Chrome Hooks
SHOOKCX
(For use with midway rail)
(12pk)
(300mm unit)
WRSHELF3CX5
(Pack of 5)
Wine Rack insert
WRSHELF5CX
(500mm unit)
Chrome Kitchen
Roll Holder
(For use with midway rail)
Chrome Midway Rail
WRSHELF5CX5
KRHCX
(Pack of 5)
(300mm)
MWRAIL10CX
Chrome Pull-out
Larder Baskets
PLUBASKCX
1620
(1000mm)
Chrome Shelf Basket
SHELFBASKCX
(For use with midway rail)
(294mm)
Chrome 1/2
Carousel Baskets
(for 1000BU with 500 door
/1200BU with 600 door only)
Chrome Spice Rack
SPICERACKCX
(For use with midway rail)
(294mm)
Chrome Basket
with Runners
(450x464mm)
850 dia
CAROBASKCH
LEMANSCU
(1000mm unit
500mm door
opposite handing
to CBU)
Le Mans Pull
Out Corner
PBASK5CX
PBASK6CX
(450x564mm)
Double Towel Rail
Pull Down Basket
for easy access to wall units
32
METALTRAIL
SPRINGBASKCX
45° pull out
Wine Glass Rack
90
GLASSCOL2
(300mm Cabinet)
(Pack of 2)
DPLBASK45
ACCESSORIES
Drawer Organisers
Code
Drawer Organisers
Code
CTRAYSUPR5V
(433x420)
Supra Drawer Box
Cutlery Tray
CTRAYSUPR4V
Revo Pasta/Cereal Store
PDPASTA6
(333x420)
(276mm Deep Drawer)
(600mm)
Revo Herb/Spice Tray
(500mm)
CTRAYSUPR6V
(533x420)
800 Cutlery Tray
CTRAYGALL8SV
(Metallic wide pan drawers)
(Silver)
HERBSPICE5
(Standard Drawer)
HERBSPICE6
(600mm)
800 Pan Drawer Dividers
(Metallic wide pan drawers)
DWDIVGALL8
(Silver)
PDPLATESTK6
(600mm)
Revo Drawer Plate Stack
PDPLATESTK8
(276mm Deep Drawer)
(800mm)
PDPLATESTK10
CTRAY5PK
(1000mm)
(500mm)
REVO Timber
Cutlery Tray
(Standard Drawer)
CTRAY6PK
(600mm)
CTRAY8PK
(800mm)
CTRAY10PK
Revo Stainless Steel
Containers
(Standard Drawer)
(1000mm)
Revo Utensil Tray
& Sliding Knife Block
(Standard Drawer)
UTRAY6KNIFE
(600mm)
Revo Utensil Tray
& Knives
(Standard Drawer)
(Standard Drawer)
(400mm)
Revo Aluminium
Cutlery Inserts
Revo Utensil Tray
UTRAY10KNIFE
(1000mm)
CTRAYGALL4M
KNIFEBLOCK6
(600mm)
(Standard Drawer)
UTRAY8KNIFE
(800mm)
(300mm)
(500mm)
UTRAY5 (500mm)
UTRAY6 (600mm)
UTRAY8 (800mm)
UTRAY10 (1000mm)
CONTAINSL6
(600mm)
CTRAYGALL3M
KNIFEBLOCK5
Revo Knife Block
CONTAINSL5
(500mm)
(Standard Drawer)
CTRAYGALL5M
(500mm)
CTRAYGALL6M
(600mm)
CTRAYGALL8M
(800mm)
CTRAYGALL10M
(1000mm)
DW47ORG6
Revo Aluminium Pan
Drawer Organisers
(Deep Drawer)
(600mm)
DW47ORG8
(800mm)
DW47ORG10
Orgawing
800/1000mm Pan Drawer
ORGAWING
(1000mm)
DW47JAR6
Revo Aluminium Jar
Organisers
(Deep Drawer)
(600mm)
DW47JAR8
(800mm)
DW47JAR10
(1000mm)
CTRAYGALL4V
(462x310)
REVO Metallic
Cutlery Tray
CTRAYGALL5V
(462x410)
CTRAYGALL6V
(462x510)
33
ACCESSORIES
Lighting
Angled Downlighter
Single Wedge Light
Transformer and Dimmer
Code
ANGDLIGHT
(75mm diameter)
RWEDLIGHT20W
Lighting
Code
Pyramid Light
(with Transformer)
(Pack of Two)
DELTALIGHT2
Coollight Downlighter
COOLLIGHT1
(Pack of 1)
(80 x 133 x 75mm)
(with Transformer)
Available in Chrome
TRANSFORMER
Chrome Cornice Light
CORLIGHTCH
(with Transformer)
(Pack of Two)
COOLLIGHT2
(Pack of 2)
SHELFILU5
LED Plinth Lights
Not suitable in front of
cleaning appliances
(500mm)
PLINTHLED
(pack of 4)
Illuminated Shelves
SHELFILU6
(600mm)
SHELFILU12
(1200mm)
Spotlight
Available in Chrome
Fluorescent Light
(use with MAINSLEAD)
Fluorescent Striplight
SLIGHT1
Pop Up Socket
POPUPSOCKET
Surface Mounted
Fluorescent Light
(7 watt)
6 Way Distributor
DISTRIBUTOR6
FLIGHT
SURFACELIGHT
MFLIGHT267
(267mm/6W)
MFLIGHT343
(343mm/8W)
Coloured Bulbs
Blue, Red & Warm White
REPBULB7W
MFLIGHT640
(640mm/18W)
Connecting Lead
CONLEAD500
(595mm)
CONLEAD3000
(3000mm)
34
Transformer
UNIVTFORMER
ACCESSORIES
Miscellaneous
Code
Miscellaneous
Code
UNITSUP10AU
2
Ventilation Grill
80
VENTGRILL
Aluminium
Support System
(1000x600mm)
1
3
UNITSUP20AU
(2000x600mm)
UNITSUP6AU
4
(600x600mm)
Coloured
Glass Splashback
Available in Pewter, Atlas, Bride,
Cloud, Ebony, Riviera
(Bride will be supplied as standard
unless specified otherwise)
GLSPLASH675
600(w) x 750mm(h)
1. UNITSUPENDAU
GLSPLASH975
(Pack of 2 ends)
900(w) x 750mm(h)
2. UNITSUP120AU
GLSPLASH1075
Island Pack 880 x 2000mm
use with
1000(w) x 750mm(h)
Aluminium Support
System Extras
UNITSUP20AU
3. UNITSUPLEGAU
GLUP1014
Coloured Glass Upstand
Glass Shelf
Deco Bracket
(Pack of 2 Legs)
1000mm(w) x 140(h)
supplied in pack of 2
BRKDECGLSH
4. UNITSUPDEC20
(3000mm)
Decorative Strip
Worktop Bracket
WTMOUNTBAR
Decorative Leg
ADJCHRLEG
Waste Storage
Code
GLSHELF6F
(600 x 247mm)
Glass Shelves (Frosted)
GLSHELF8F
(800 x 247mm)
GLSHELF10F
(1000 x 247mm)
GLSPLASH6
Frosted Glass
Splashback
600(w) x 750mm(h)
GLSPLASH9
900(w) x 750mm(h)
Tandem Waste Bin
ECOBIN3
Do not use with
170˚ hinge
(300mm only)
2 x 15 litres
SBACK675
600(w) x 750(h)
Stainless Steel
Splashback
SBACK775
250
700(w) x 750(h)
SBACK975
900(w) x 750(h)
450
Tambour Kit
(Metallic Effect)
Soft Close Door Buffer
Do not use
with 170˚ hinge
TAM513SL
525 365
SMOVE5
(18mm only)
ECOBIN4
Triple Waste Bin
(400mm only)
1 x 18 litres
2 x 8.5 litres
Do not use
with 170˚ hinge
SU10LINER
Sink Liner
(1000mm)
SU6LINER
260 dia
(600mm)
Deluxe Waste Bin
90° hinged door only
(will not fit under sink bowl)
Fold Down TV/DVD
RECYCLEBIN
(500/600mm unit)
1 x 19 litres
1 x 12 litres
1 x 9 litres
Eco-bin
280
SWINGBINCH
12 litres
(400mm unit min)
FOLDTVDVD
35
INSTALLATION
15mm Standard BOL
WALL UNITS
Screw through the top & bottom back
rails/hardboard back. Fixing points in the
bottom rail should be vertically in line
with those in the top rail.
Fixing points should be located at each
end of the unit as shown, no more than
100mm from the inside face of the unit.
WALL UNITS WITH
TWO DOORS
These require a further fixing
at the mid point of the top rail.
BASE UNITS
BROOM & LARDER UNITS
Timber batten screwed to wall at internal
dimensions of unit and screwed through to
timber batten.
36
Bracket secured to side panel of unit
and screwed through to wall.
Bracket position adjustable over the
top 66mm of the unit.
INSTALLATION
18mm Excel
When fitting the units, attach to the wall the hanging plates and make all
adjustments. Remove the unit from the wall and drill through the back and vertical
upright as indicated (A). Secure the unit with additional screws to a structural part of
the wall.
‘A’
Fit the hanging brackets to the top corners of the units from the back using four of
the screws supplied per bracket. The hanging brackets should be screwed to the
side panel first and then to the top panel as per the assembly instructions.
37
37
2000/2176mm
Determine the location of the unit(s) and mark a horizontal line 2176/2000mm
from the floor. Mark the position of each unit. Fit the hanging bracket plates to the
wall as illustrated.
FIXING POINTS
BROOM & LARDER UNITS
Timber batten screwed to wall at internal
dimensions of unit and screwed through to
timber batten.
• Wall units are supplied with wall hanging
brackets. The brackets are adjustable for
height and distance from the wall. When
fitting the units attach the unit to the wall
hanging plates and make all adjustments.
Remove the unit from the wall and drill
through the back and vehicle back uprights
as indicated. Secure the unit with additional
screw to a structural part of the wall.
• IMPORTANT:
Any screws and other fixings used must be
suitable to support the units, when loaded,
into the material they are to be fitted.
‘A’
37
GUIDANCE NOTES
For the installation of kitchen fitments (in compliance with BS6222 part 4, 1998)
DELIVERY & STORAGE ON SITE
ALWAYS:
• Store units, worktops and other items under cover,
in dry conditions, immediately.
• Store loose shelves separate from units.
• Protect unit fronts.
• Cover units during storage to prevent dirt and
debris collecting on moving parts such as drawer
runners and hinges.
• Avoid twisting and distortion.
• Store worktops upright or flat, face to face on
bearers with the top surface protected against
damage.
NEVER:
• Store units on their sides unless they have soft,
grit-free material underneath.
If ceramic tiles are to be fitted to the floor after the
kitchen has been installed, scribing down of the units
will be unnecessary.
Should it be necessary to scribe the rear of the units,
then this must be as little as possible especially if
integrated appliances are to be fitted into tall units
or under worktops.
Kitchen base units should be fixed to the wall
using the metal cabinet fixing bracket supplied
(18mm Excel). The appropriate fixing should be
dependent upon the surface being fixed to. It is not
necessary to fix through every bracket on a run of
units, but fixings either side of an appliance space
and on the ends of each run of units must be made.
Tall units (oven housings, larders, etc.) should be
level and plumb on all faces and fixed to the wall at
four points.
• Stack wall units more than four high.
Wall units are to be fixed level and square using
hanging brackets if appropriate, or directly to the
wall through the back rail where the following
number of fixings should be used:
• Stack frontals against each other or against a wall.
300mm to 600mm wide unit
4 fixings
• Store units, worktops and other items near
direct heat.
800mm to 1000mm wide unit
5 to 6 fixings
1200mm wide unit
6 fixings
• Remove tapes from doors or drawers until
immediately before fitting.
Fixings for standard walls should be 21/2”
No.10 counter sunk screws or longer. Dryline walls
(dot and dab) will require longer hollow wall fixings,
depending on the thickness of the dab and the type
of block work being screwed into. It is essential to
use the correct fixings and to check screws match the
correct plug size being used.
• Stack base units more than three high.
Customers must check units as they are delivered and
sign for them as being in good condition. If they are
not, the driver’s copy of the advice note must be
marked accordingly and signed by the customer.
INSTALLATION METHODS
Consideration should be given to following trades
when allowing access to electrical points, rodding
eyes, stop taps, waste traps and any other items
or areas where post completion access will be
required.
To prevent any accidental damage to the doors and
drawers always remove them from the units and store
carefully away from the working area. Any sleeving
protection should remain on until they are refitted to
the units and adjustment has been carried out.
Having checked the plot for level and square,
commence by marking a level line on the wall around
the base unit area to indicate the finished unit height.
FITTING KITCHEN UNITS
Units should be packed up or scribed down as little
as possible. We recommend a maximum of 6mm
packing with firm material where required.
Scribing down should be 10mm maximum, but this
depends on any appliances fitting under worktops.
Please check manufacturers’ appliance sizes before
scribing down in excess of 10mm.
38
Units should be screwed together at three positions,
preferably hidden from view (e.g. by hinge block, back
rail on base units and behind shelf on wall units).
All visible screw heads should be capped with colour
caps. Recessed caps (10mm) are available for white
carcase interiors.
Extended voids (over 600mm wide between end
panels) under worktops, especially corner units, and
adjacent to worktop joints, should have supporting
battens fixed to the wall beneath.
APPLIANCE SPACES
Care should be taken when leaving spaces for
freestanding and integrated built-under appliances.
Built-under integrated spaces should be 603mm
maximum. This will allow for easy installation and
removal without causing problems with door
alignment.
600mm integrated and cantilever cooker hoods
require 600mm at the back and front of the void.
Freestanding appliances should have a minimum
space 10mm greater than their width to allow easy
installation/removal.
Adjacent units to appliance spaces must be plumb
and parallel.
Hose positions for dishwasher and washing machines
are critical especially on integrated appliances.
Dishwasher hoses should be led through an aperture,
cut at low level into the side panel at the rear of the
adjacent sink unit, for connection to services within
that unit. Washer hoses will have holes drilled at top
level in the side panel at the rear of the sink unit if
connecting to service in the unit.
When fitting any appliances the manufacturer’s
installation instructions must always be read prior to
any installation and followed throughout.
When fitting ‘wet’ appliances ensure that hoses do
not become kinked or trapped when the appliance is
pushed home.
FILLERS
Filler panels are to be scribed to walls and sealed
with matching decorator’s filler and not silicone.
15mm or smaller fillers where seen, should be edged
in exterior cabinet matching colour.
Tray spaces or any site constructed platforms should
have the front edges to match the cabinet colour
exterior.
PLINTH
Continuous plinth will be cut and edged at the unit
run ends to finish flush with the cabinet end panel.
Cabinet exterior matching edging tape should be
applied to the raw coreboard with contact adhesive.
Peel and stick edging or hot melt adhesive is not
recommended.
Ventilation slots as found cut on standard transit
plinths on kitchen units must be cut in the
continuous plinth for oven, fridge or freezer
housings. The slot is approximately 500mm long
and 40mm deep and must be cut on the upper edge
of the plinth.
The plinth should be screwed to the plinth haunch
30mm down from the top edge and capped with
matching screw caps or by using the clips provided.
Plinths should be fitted tight to the underside of the
bottom panel of the base unit and not pushed to the
floor. The plinth adds additional support to the
bottom panel by keeping it up tight.
Plinths should never be glued or nailed to cabinets as
this prevents easy removal.
GUIDANCE NOTES
For the installation of kitchen fitments (in compliance with BS6222 part 4, 1998)
CORNICE AND PELMET
AFTERCARE INSTRUCTIONS
Cornice and light pelmet mitres should be clean and
accurately cut using a fine mitre saw.
• The tape from all doors and drawers should be
removed by hand, without the use of a sharp
implement.
Fixing cornice should be from above. If this is
impossible, fixing from the inside of the cabinet is
recommended. When fixing from the inside of the
cabinet, 10mm recessed screw caps should be used
and 1” x No. 6 CS screw. If longer screws are used and
not recessed they should be covered by a matching
cover cap.
Light pelmet can be fixed direct through the wall unit
bottom or with half blocks/L brackets. A mixture of
both methods of fixing is acceptable especially when
fixing to display feature units.
• Any marks subsequently left should be cleaned off
using warm water and a mild detergent.
• DO NOT attempt to clean units, worktops or sink
tops with cleaning powder or any form of abrasive
material or agent.
• Drawer runners and hinges should be cleaned to
ensure that no plaster, grit or other material will
impede their action.
All mitres should be glued using PVA wood glue or
Cyanoacrylate adhesive. Under no circumstances
must hot melt adhesive be used.
Only minor discrepancies in the cut should be filled
with matching filler waxes. (Not silicone.)
Direct fixing should be positioned as close to the
end panels as possible for both pelmet and cornice.
The number of fixings per unit size are as follows:
300mm to 600mm wide unit
2 fixings
800mm to 1000mm wide unit
3 fixings
The third fixing for 800/1200 units to be by the
centre post.
Cornice should be inset on all wall unit/tall unit
returns so that the front lip of the flat (fixing) base
of the cornice is inset by 15mm, but fitted with the
front edge of the unit’s top panel on the elevation.
Pelmet should be inset by 15mm on wall unit returns
but flush with the front edge of the bottom shelf on
the elevation. In this way the appearance of a
uniform recess will be achieved when the unit door
is closed.
WORKTOP FIXING
Worktops should be fixed to the base units and
independent tops to wall battens, and levelled in
both directions.
The tops are fixed through the brackets or half
blocks on the base unit end panels, and up through
the front rail.
The fixings in the front rail should be as close to the
end panel as possible and by the centre post on a
double base or corner unit.
39
Symphony, Gelderd Lane, Leeds LS12 6AL
Tel: 0870 120 8000 Fax: 0870 835 5999
Email: [email protected]
www.symphony-group.co.uk
© The Symphony Group PLC June 2008
Cert No. FM 1487
Cert No. 005
In keeping with our policy of continuous product development, we reserve the right to change colours,
designs, materials, descriptions or methods of manufacture. Such changes may be made without notice and
without incurring any liability. Nothing in this publication should be considered to be part of any contract.
The illustrations included in this publication are to indicate general format and are not necessarily correctly
scaled, proportioned or detailed.
Natural wood is used in some of our kitchens. As a natural material, wood reflects the endless variety of grains
and textures found in nature and such variances can be expected in any selection of timber fronted units.
Timbers mellow when exposed to sunlight, so a colour change can be expected.
PVC laminates and melamine finishes are also subject to slight colour change over a period of years.
Unless specified otherwise, the expression 'solid timber' refers to door and drawer fronts only. A copy of our
conditions of sale is available on request. Errors and omissions excepted.
Copyright and all other rights in this brochure and the photographs and other works upon which it is based,
are owned by The Symphony Group PLC. No part of the brochure and said photographs and other works may
be reproduced or transmitted in any form or by any means (including but not limited to photocopying or
storing in any electronic medium) without the prior express written permission of The Symphony Group PLC.