TIMING SERVICE TOOL - handyforce.com

Transcription

TIMING SERVICE TOOL
TK0045 4PCS Cup Rocket Set
TG0007 Cam Holding Alignment Tool Kit
TG0011
Used to align and hold camshaft.
Applicable: Audi 3.0L V6 5-Valve.
This tool enable cups to be installed smoothly without
scratching damage O-ring cylinders.
Contents:
1-1/2" (33.2mm/35mm) for UD, FUSO, and HINO.
1-3/8" (31.2mm/33mm) for UD.
1-7/16" (36.7mm/38.5mm) for HINO.
1-1/2" (38.2mm/40.0mm) for HINO.
This timing setting tool kit is suitable for Volkswagen Lupo and
Polo.
For 1.2 liter engines 2 and 3 cylinder, 6 and 12 valve.
TG0097 Engine Timing Tool Kit
TG0014
This kit of twelve valve tools is required for petrol and diesel
engine.
Service including timing belt replacement on recent models
and also older 1.9d models from 1976.
TG0008 Valve Camshaft Setting Tool
Flywheel locking tool with 2 adaptors.
For ford diesel and petrol engines.
www.handyforce.com
TK-150
Timing Tool Kit
(For Land Rover & Jaguar)
Flywheel locking tools and camshaft timing pins for land
rover discovery 2.7 TD V6, range rover sport 2.7 TD V6 and
Jaguar style TDVI with V6 engines with automatic and manual
tensioners.
TG0018 Camshaft Alignment Tool
For camshaft alignment without adjusting top dead centre
position on 1.6 & 1.7cc OHC diesel engines.
Suitable for GM, OPEL, VAUXHALL up to 1987.
TG0015 Ford Engine Timing Tools
Timing Setting Tool Kit
(For VW POLO LUPO)
This tool is used for holding both camshafts at the TDC
position when replacing the timing belt.
Used AUDI & VW models with V8 motors with 5 valves per
cylinder (except S4).
TG0049 Timing Tool Kit
For FORD 1.4 & 1.6 TDCI engine.
Contents:
1PC flywheel locking pin.
1PC camshaft / fuel pump alignment tool.
1PC camshaft / sprocket locking tool.
TG-151
www.handyforce.com
TIMING SERVICE TOOL
TG0019 Timing Tool Set For VAG 2.0 TDI PD
Timing Tool Set For VAG 2.0 Liter TDI PD DOHC.
Engines fitted to AUDI A4,A6 SKODA OCTAVIAII and
VOLKSWAGEN GOLF,GOLF PLUS,JETTA and TOURAN
models.
TG0020 Ford Timing Tool Set
TG0024 Engine Timing Locking Tool Set
A comprehensive 17 piece set of engine timing locking tools for
camshaft, crankshaft and flywheel.
The set include one piece universal camshaft locking tool is
easily and quickly for locked.
Applicable for Citroen, FIAT, Ford, Opel, Peugeot, Renault,
Rover, Vauxhall and Volkswagen.
TG0047
Timing Tools
(FORD Diesel Engines)
TG0050
Application:
AUDI A3 1.6 FSI 2003-2006
VOLKSWAGEN GOLF 1.6 FSI
TOURAN 1.6 FSI
AUDI A3 1.6 FSI 2003-2006
VOLKSWAGEN GOLF 1.6 FSI
TOURAN 1.6 FSI
AUDI A3/S3 1.8 TURBO 1996-2003
A4/A6 1.8 TURBO 1994-2006
CABRIOLET 1997-2000
TT 1.8 TURBO 1998-2006
VOLKSWAGEN BEETLE 1.8 TURBO 1999-2006
GOLF/BORA 1.8 TURBO 1997-2005
PASSAT 1.8 TURBO 1996-2005
SHARAN 1.8 TURBO 1997-2006
SEAT LBIZA 1.8 TURBO 1999-2002
CORDOBA 1.8 TURBO
LEON 1.8 TUBO 1999-2005
TOLEDO 1.8 TURBO 1999-2005
SKODA OCTAVIA 1.8 TURBO 1996-2005
OCTAVIA 1.8 TURBO 2000-2005 20V RS
Suitable for FORD TDDI and TDCI series diesel engine.
1.8 TDDI /TDCI FIESTA/ FOCUS turbo.
1.8 TDDI /TDCI & TRANSIT/TRANSIT CONNECT.
TG0042 Camshaft Setting Plate
Suitable for Ford Fiesta, RS1800, Escort, Mondeo, Cougar,
Puma, Focus, Focus CMax Ti-VCT, engines timing setting use.
TG0021
Timing Tool Kit
(For GM 1.3 CDTI Diesel Engine)
Used to hold both camshafts at TDC position when replacing
timing belt.
Applicable:
AUDI: A4, A6, A8, S4, all road(95-04).
VW: PASSAT (96-04) with engine codes ACK, AGA, AGB,
AJG, ALF, ALG, ALW, AML, AMM, AMX, APR, APS, APZ, AQD,
ARE, ARJ, ASM, BDV, BES.
TG0048 6PCS Timing Tool Kit
This set use for gm 1.3 CDTI diesel engine.
The kit include flywheel locking pin, camshaft setting tools,
tensioner locking pin.
TG0023
Setting/Locking Tool Kit
(FOR VAG V6 TDI PETROL ENGINE)
A dedicated set of setting/ locking, support and tensioner
adjusting tools for VW 2.5 V6 diesel engines.
www.handyforce.com
For BMW, LAND ROVER, GM 2.5 TD-5 ENGINE.
Contents:
1PC flywheel timing pin.
1PC camshaft alignment tool-diesel.
2PC timing chain tensioner pin.
1PC crankshaft holding tool.
1PC timing chain compressor.
1PC injection pump puller.
1PC injection pump shaft lever.
TG0078
Application: for FORD.FIESTA, FOCUS,CMAX, TOURNED,
TRANSIT, 1.8TDDL.
Contents:
1PC locking strap.
1PC flywheel locking tool.
1PC TDC setting screw.
1PC camshaft locking pin.
1PC injection/high pressure fuel sprocket remover.
1PC timing chain front cover alignment tool.
TG-152
Timing Tool Kit(For 1.8 Turbo & 1.6
FSI Chain Engines)
TG0060
Engine Timing Tools
(For VW and AUDI)
Camshaft Alignment Plate For VW
AUDI
Special designed to align the camshafts to proper position
when adjusting and assembling.
Applicable: VW-PASSAT, VR-6.
Material: steel.
This new kit of twelve tools is required for VW and AUDI of
petrol & diesel engine service.
Including timing belt replacement on recent models and also
older 1.9d models from 1976.
Application:
AUDI A4, A6, A8, A11 YOAD (97-04), VW PASSAT (98-04).
TG-153
www.handyforce.com
TIMING SERVICE TOOL
TG0053 AUDI Crank Locking Pin
TG0057 Camshaft Adjusting Socket For AUDI
This pin is used to lock the crankshaft at the TDC position
while replacing the timing belt.
Applicable: AUDI 3.0L V6 5 valve.
Size: M12 x 1.5.
Camshaft adjusting socket used to adjust variable valve timing
on the exhaust side camshaft to basic position for AUDI 3.0i V6
5 valve engine.
TG0052
TG0054 VW & AUDI Crank Locking Pin
Timing Tool
TG0062
VW and AUDI Belt Tension Adjuster
Tool
Special angle designed for adjusting the belt tension on the
free roller.
Applicable: VW. AUDI.
Size: 195mm x 36mm x Ø20.5mm.
TG0066 Timing Locking Tools
while replacing the timing belt or removing the crankshaft bolt.
Applicable: VW & AUDI models with 2.7 & 2.8 liter v6 engines.
Size: M18 x 1.5.
TG0055 Camshaft Alignment Tool
Special angle designed for adjusting the belt tension on the
free roller.
Applicable: VW. AUDI.
Size: 185mm x 20mm x Ø20.5mm
Can use for RENAULT LAGUNA 2.0 IDE (2001-2005) F5R
engine.
TG0069 Timing Setting Tool Kit
TG0056 Timing Tool Kit ( FOR BMW MINI)
VW and AUDI Belt Tension Adjuster
Tool
Suitable for RENAULT CLIO, MEGANE, LAGUNA, KANGOO
1.9 DTI engines.
TG0051 Bracket For Chain Adjuster
This tool is used to hold both camshafts at the TDC position
Used AUDI models with V6 engine, 2 valves per cylinder.
TG0061
Application: CITROEN, FIAT, FORD, OPEL, PEUGEOT,
RENAULT, ROVER, VAUXHALL and VOLKSWAGEN.
TG0065 Timing Locking Tools For FORD
Used to retain camshaft chain adjuster.
Applicable: VW & AUDI 4, 6 (2.7L & 2.8L) & 8 cylinder engines
containing 5 valves per cylinder.
TG0058 Spanner Wrench For Timing Belt
This tool kit can use for BMW MINI 2001~2006, MINI COOPER
S 2002~2006 and MINI COOPER 2001~2006.
Contents:
1PC Camshaft sprocket holding tool.
1SET Engines support bracket.
1PC Tensioner assembly tool.
www.handyforce.com
This wrench can use for the adjustment of the timing belt.
Application:
2004-2005 VW GOLF, JETTA pumped use.
2002-2005 AUDI 3.0 V6 engines.
TG-154
Use for AUDI SEAT SKODA VW.
AUDI:
A2(01-06), A3(01-07), A4(99-07), A6(98-07).
SEAT:
AROSA(99-05), IBIZA/CORDOBA(02-07), ALTEA(04-07),
LEON(00-07), TOLEDO(04-07), ALHAMBRA(99-07).
SKODA:
FA B I A ( 0 0 - 0 7 ) , R O O M S T E R ( 0 7 ) , O C TAV I A ( 0 0 - 0 7 ) ,
SUPERB(02-07).
VW:
LUPO(99-05), POLO(99-07), FOX(05-07), GOLF/BORA(9807), JETTA(05-07), BEETLE(00-07), PASSAT(98-07),
TO U R A N ( 0 3 - 0 7 ) , S H A R A N ( 9 9 - 0 7 ) , C A N D Y ( 0 3 - 0 7 ) ,
TRANSPORTER(03-07).
This five piece set is essential for replacing the cam belt on
FORD FOCUS/CMAX 1.6 TI-VCT with engine code HXDA
(2003-2007) plus 2.0 TDCI with engine codes G6DA G6DB
G6DC 2003-2007.
Also required flywheel locking tool and adaptors.
TG-155
www.handyforce.com
TIMING SERVICE TOOL
TG0064 Engine Timing Tool Set (BMW)
TG0067
This comprehensive set of tools enables the correct timing
positions to be achieved on both camshaft and crankshaft
whilst replacing the timing belt or chain on both petrol and
diesel engines.
Special wrench for controlled turning of the exhaust camshaft
sprocket when removing and installing the VANOS unit.
Primary timing chain pre-load tool for tensioning the timing
chain on M50 engines.
M22 threaded for M42/M60 engines.
M26 threaded for M50/M52 engines.
TG0077
Engine Timing Tool Kit
(For CITROEN & PEUGEOT)
This comprehensive set tool enable the correct engine timing
to be made when replacing the timing belt.
Suitable for use on the most recent cars with either HPI (Petrol)
or HDI (Diesel) engines.
TG0072 VAUXHALL Timing Tool Kit
TG0070
This set can use for CLIO, MEGANE, SCENIC LAGUNA,
ESPACE, KANGOO TRAFIC & MASTER (99-04) engine, 1.5,
1.9, 2.2 & 2.5 DCI.
TG0073 Diesel Fuel Pump Timing Set
Engine Timing Tool Set
(For FORD & MAZDA)
This comprehensive set of tools enables the correct engine
timing to be made when replacing the timing belt.
Applicable:
FORD & MAZDA.
TG0074 Timing Tool Kit (RENAULT)
TG0068 Timing Setting Tool Kit
Camshaft Alignment Plate For VW &
AUDI
Applicable: VW-PASSAT, VR-6.
Material: Plastic.
This precision measuring instrument is designed for resetting
the timing position on diesel engines with the following fuel
pumps BOSCH/EP/VE ROTORY,KIKKI, NIPPON, DENSO,
CAV ROTO DIESEL, top entry these fuel pumps will be found
on the following vehicles with diesel engines.
TG0063 Crankshaft Locking Tool
Enable replacing the timing belt without removing the cylinder head cover.
Application:
VW POLO CLASSIC, GOLF, BORA, BETTLE, CANDY (97-06).
www.handyforce.com
TG-156
For VW, AUDI, SEAT, SKODA, CITROEN, PEUGEOT.
Application:
PEUGEOT 106, 205, 206, 306, 307, 309, 405, 406, 407,
605, 806, 807, EXPERT, PARTNER, BOXER (AB 1986), 406
COUPE, 607.
CITOREN AX, ZX, XM, VISA, XSARA, XANTIA, DISPATCH ,
SYNERGIE / EVASION, BERLINGO, DISPATCH, JUMPY, C 2,
C 3, C 5, RELAY / JUMPER.
AUDI 80, A2, A3, A4, A6, CABRIOLET (1995 BIS 2000).
SEAT IBIZA, CORDOBA, LEON, TOLEDO, INCA, AROSA,
ALHAMBRA, ALTEA.
SKODA FELICIA, OCTAVIA (1993 BIS 2005), FABIA.
VW LUPO, POLO, CADDY, GOLF, BORA, NEW BEETLE,
PASSAT, SHARAN, TOURAN, TRANSPORTER, 1,7 1,9 D /
TD / SDI/ TDI.
timing to be held when servicing RENAULT engines.
Application:
Clio 1.2/1.4/1.6/1.8 16V.
Clio Sport 2.0 16V.
Clio Williams 2.0 16V.
ESPACE 2.0, 2.0 16V, 2.2 TD.
Express 1.4.
Extra 1.4.
KANGOO 1.2/1.4.
LAGUNA 1.6 16V, 1.8, 2.0, 2.0 16V, 2.2D/TD, 2.5D/TD.
Master 2.5 D/TD.
Megane 1.4, 1.6, 2.0 16V.
R19 1.4, 1.4 ECO, 1.8 16V.
Rapid 1.4.
Safrane 2.0 16V, 2.2 TD, 2.5 20V.
Scenic 1.4, 1.6, 2.0 16V.
Trafic 2.5C.
Twingo 1.2.
TG-157
www.handyforce.com
TIMING SERVICE TOOL
TG0075
33PCS VW and AUDI Engine
Timing Setting Set
TG0076
This new kit of twelve tools is required for petrol and diesel
engine service including timing belt replacement on recent
models and also older 1.9d models from 1976.
Application:
AUDI:A4, A6, A8, A11, YOAD(97-04), engines codes AFB,
AKE, AKN AYM, BAU, BCZ, BDG, BDH, BFC.
TG0071 FORD Timing Locking Tool Kit
VW & AUDI Engine Timing Setting
Set (35PCS)
Application:
AUDI:A4, A6, A8, A11, YOAD(97-04)
VW: PASSAT (98-04)
Engines codes: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH,
BFC
TG0080
TG0083 4PCS Adjusting Tensioner Belt Set
Diesel Engine Timing Locking
Tool Kit
This kit can use for PSA2.5, FLAT 2.8D, IVECO, RENAULT
and VAUXHALL. Include 2pcs setting pin, 1pc flywheel locking
pin and 1pc tensioner retaining tool.
Models:
1. Also for CITROEN/PEUGEOT, FIAT and IVECO models.
2. TRAFIC(80-00),MASTER(80-07), MASCOT(99-07).
3. FIAT, PSA, RENAULT models daily (91-05), turbo daily (9400).
4. RELAY/JUMPER (01-02), BOXER(00-06).
5. ARENA (97-01), MOVANO (98-03), VANS.
Can use for FORD FIESTA, ESCORT, ORION, COURIER,
FOCUS C-MAX, MONDEO (1988-2003), FUSION, TRANSIT
1.8 D / TD / TDCI / TDDI 2.0 / 2.4 TDCI / TDDI / 1.4 / 1.6 TDCI.
TG0084 Tensioner Roller Adjusting Tool
TG0081 Volkswagen Timing Tool
TG0079 Tensioner Adjusting Tool
A set of two cam belt tensioner locking tools.
Required for use on Volkswagen 4 cylinder TDI PD SOHC
diesel engines.
Including:
GOLF /GOLF PLUS/ JETTA/ PASSAT/ EOS TOURAN/
CADDY /CADDY MAXI.
Application for all VAG group of Vehicle for adjusting tensioner.
Application:
AUDI: A4(01-07), A6(01-05), CABRIOLET(03-07), SEAT
IBIZA(04-07), SKODA SUPERB(02-07), VW POLO(06-07),
EOS(06-07), PASSAT(01-05).
For petrol 1.8/1.8T.
With automatic Tensioner (belt) chain in head.
Models:
AUDI A3, S3, A4, A6, TT.
SEAT IBIZA/CORDOBA LEON TOLEDO ALHAMBRA.
SKODA OCTAVIA, VW GOLF/BORA, BEETLE, PASSAT.
Engines:
ADR, AJQ, APU, ARZ, AWU, BVP, AEB, AMK, APX, ATC, AWV,
BVR, AFY, AMU, APY, ATW, AYP, AGN, ANB, AQA, AUM, BAM,
AGU, APG, AQX, AUQ, BEA, AJH, APH, ARG, AVC, BFV, AJL,
APP, ARX, AWC, BKF, AJP, APT, ARY, AWP, BNU.
TG0085
Master Engine Timing Tool Kit
(For TOYOTA, MITSUBISHI)
TG0082 3PCS Adjusting Tensioner Belt Set
TG0090 Valve Spring Compressor
Application:
CITROEN BERLINGO 1.1/1.4(1994-2004).
PEUGEOT 106/205/206/306/307/405/PARTNER(1993-2004).
CITROEN XSARA 1.4/1.6(1994-2004).
Application all the VAG group of Vehicle for adjusting tensioner.
www.handyforce.com
TG-158
This comprehensive tool kit includes a large number of
crankshaft pulley tools for use on a wide range of TOYOTA or
MITSUBISHI vehicles.
This master timing tool kit has been specifically compiled to
give a comprehensive range of engine timing locking tools for
cam belts, chains and gears.
TG-159
www.handyforce.com
TIMING SERVICE TOOL
TG0095 Engine Timing Tool Set
TG0092
For FIAT use.
DIESEL ENGINES:
FIAT BRAVA, BRAVO, MAREA/WEEKEND, PALIO, PUNTO,
MULTIPLA, DOBLO, ULYSSE, DUCATO, STILI JTD diesel
engines 1.9D/TD 1.9JTD 2.4TD/JTD.
PETROL ENGINES:
FIAT BRAVA, BRAVO, BARCHETTA, CARGO, COUPE,
MAREA, PALIO WEEKEND, PUNTO, MULTIPLA, STILO,
IDEA DOBLO Twin Cam engines 1.2 1.4 1.6 1.8 16V.
Engine Timing Tool Set For FIAT &
OPEL
Applicable:
FIAT & OPEL.
TG0093 BMW Camshaft Alignment Tool
TG0087 Tensioner Roller Adjusting Tool
TG0086 Master
(For HONDA, MAZDA, DAEWOO, HYUNDAI, SUBARU)
This set is suitable for HONDA, MAZDA, DAEWOO,
HYUNDAI, SUBARU vehicles.
crankshaft pulley tools for use on a wide range of HONDA,
MAZDA…etc vehicles.
TG0115
VW/AUDI 1.8T tensioner holder kit used for holding timing belt
tensioner and the accessory belt tensioner.
TG0096
2-Way Universal Timing Belt
Locking Tool
Applicable for Alfa Romeo Twin Spark 1.4 ; 1.6 ; 1.8 ;and 2.0L
16V Twin Cam petrol engines (Engine code: 162.01, 322.01,
323.01, 323.10,335.03, 671.06.672.04, and 676.01)e,g.
Alfa Romeo 145,146,147,155,156,166, Spider and GTV.
To prevent the engine shafts (e.g. camshafts, crankshaft ) from
turning or to keep them in a specific position when changing a
timing belt or during other engine repairs.
TG0113
BMW Engine Timing Tool Set
Engine Timing Tool for Alfa Romeo
13PC Diesel & Petrol Engine
Timing Kit
Includes for setting camshaft timing.
Applicable:
BMW engines models M40 & M70.
TG0094 Engine Timing Tool Set - RENAULT
The locking tool is for toothed pulleys spaced between
approximately 0mm to 60mm apart.
Suitable for Twin Cam and diesel engines. It is ensured the
driver pulleys do not lose the relationship to the crankshaft
during repair or changing the timing belt.
www.handyforce.com
TG0110
This new camshaft pulley setting tool holds two pulleys in place
while changing the cam belt and correct engine timing to be
performed when changing the timing belt.
Applicable: RENAULT 16V & K4J, K4M & F4P, F4R.
TG-160
Application for BMW engine models as following:
E87: 118i / 120i / N46 Engines.
E46: 316i / 316ti / 318i / 318ti N42 Engines.
E90 / E91: 318i / 320i / N46 Engines.
E85: Z4 2.0 N46 Engines.
Tools for camshaft installation and removal as well as removal
and installation of the inlet camshaft and carrier assembly
Valvetronic System.
For use on Audi, Citroen, Peugeot, Volkswagen and Volvo
diesel and petrol engine cars and light commercial vehicles.
After use , remove all setting pins & locking plates.
Turn the engine over twice by hand to complete a full cycle.
Regain T.D.C. ( top dead center ) & insert setting tools to recheck the alignment is correct.
Remove setting tools and check there is no obstruction, by
turning the engine over twice by hand again, to complete a full
cycle.
TG-161
www.handyforce.com
TIMING SERVICE TOOL
TG0112
BMW Camshaft Alignment Tool Kit
TG0007A Camshaft Alignment Tool Kit
TG0111
TG0034 BMW VANOS Wrench
BMW(M60,M62) Camshaft
Alignment Tool Set
For BMW twin camshaft engines with single VANOS unit
mounted on inlet camshaft.
Application for BMW engine model M50, M52, S50, S52, M42,
M44.
TG0036 Camshaft Locking Tool
Application for BMW engine models M42 & M50: Includes 2
block swivel lock plate & locking pin for setting camshaft timi
ng.
Engine models M40 & M70 : Include plate & locking pin for
setting camshaft timing.
BMW engine M60 & M62: Includes 2 block swivel lock plate &
locking pin for setting camshaft timing.
This tool kit can use for hold & align the camshafts.
Application to 2002-2005 AUDI A4 & 2002-2004 AUDI A6,
AUDI 3.0i V6 5 valve engines.
TG0039
2 blocks swivel lock plate &locking pin for setting camshaft
timing.
Application: BMW engine models M60 & M62
Petrol Engine Twin Cam Locking &
Flywheel Holding Tool Set
For locking the camshaft pulleys when changing the toothed
belt.
Engine repairs on 4 valve / 4 Cylinder injection engines.
Application for VW Lupo (Since1999), Polo (Since 1995),
Caddy (Since 1996), Polo classic, Variant (Since 1999), Golf
1.4L / 1.6L (Since 1998), Bora 1.4L / 1.6L (Since 1999).
TG0041 6PCS Belt Tensioner Retaining Pins
For 2.0 VW and Audi 2.0 L engines non bored out engines.
TG0088 Diesel Engine Timing Setting Tool Kit
When a belt tensioner is removed from the engine, the
tensioner plunger
must be compressed. The pins provides six different diameters
to retain it in
a retracted position.
Pin sizes: 0.79mm (0.031”), 1.24mm (0.049”), 1.37mm (0.054”),
1.49mm
(0.059”), 1.68mm (0.066”), 1.92mm (0.076”)
Application: Acura, Audi, BMW, Cadillac, Chevrolet, Chrysler,
Plymouth,
Dodge, DAIWOO, Daihatsu, Ford, Geo, Honda, Hyundai..etc.
www.handyforce.com
The kit supplied with adequate tools to lock the camshafts on
twin cam
Engines in order to stop them rotating out of timed position
when the timing
belt is replaced and removed.
Kit also supplied with two popular flywheel holding tools.
Suitable for a range of vehicles including Ford, Honda, Land
Rover, Rover,
VW, Renault, Citroen, Peugeot, FIAT and Vauxhall / Opel.
Set included camshaft setting / locking plate, balancer shaft
locking pin,
crankshaft TDC location pin, 5.0mm camshaft locking pins
(Pair), 6.8mm
5.0mm camshaft locking pins (Pair), 2 pieces of flywheel
holding tools and 10
Pieces of camshaft locking tools.
TG-162
Suitable for Renault 2.0 DCI twin camshaft chain drive diesel
engines or M9R engines.
Application:
For NISSAN
QUASHQUI, X-TRAIL, PRIMASTAR.
For RENAULT:
MEGANE, SCENIC, LAGUNA VEL, SATIS, ESPACE,
KOLEOS, TRAFFIC.
For VAUXHALL/OPEL:
VIVARO.
TG0120
CITROEN & PEUGEOT Engine
Timing Tool Set
Suitable for use on the most recent car with either HPI (petrol)
or HDI(diesel) engines.
Applicable: Citroen and Peugeot twin cam 16v petrol engine
codes (EW7J4, EW10J4, EW10J4S, EW10D-HPI, EW12J4).
Citroen: Xsara /Picasso C4, C5, Evasion / Synergie, c8,
Jumpy/Dispatch
Peugeot:206,307,406/coupe,607,806,807,expert.
TG-163
www.handyforce.com
TIMING SERVICE TOOL
TG0119
TG0118
For VW & Audi 1.4 & 1.6 FSI engine use.
Checking and adjustment of timing.
Installing and removal of camshaft/variable camshaft timing
unit.
Applicable: VW Polo. Golf. Touran. Caddy. Skoda Octavia.
Audi a3…etc.
TG0121
BMW Engine Timing Tool Kit
BMW Diesel Engine Timing Tool Kit
TG0123
unit.
Applicable: M41, M51, M47, TU/T2, M57 TU/T2:2.0L/3.0L 1998
later.
TG0122
Vauxhall/Opel Timing Tool
(Diesel 1.9 CDTI)
unit.
Petrol: 1.0 12V, 1.2 16V, and twin camshaft engines 1.4, 1.6,
1.8, 2.0, 2.2 16V since 1995.
Diesel: 1.3 CDTI 16V, 1.9 CDTI, 2.0 2.2 DTI.
Also include water pump tool to hold position of coolant pump,
sprocket during replacement of pump, maintaining engine
timing.
TG0126
unit.
Applicable: Petrol: M40, M43 / Twin camshaft: M42, M44, M50,
M52, M52TU, M54, M56
TG0124 Timing Tool Kit For VOLVO
(For Opel and Vauxhall)
Suitable for petrol 2.0/2.5 twin cams (belt).
These tools in use for setting engine timing.
Application: 850 (92-97), C70 (98-02), S40 (96-04), V40 (9604), S60 (01-05), S70 (97-00), S80 (99-05).
Contents:
1PC crankshaft TDC timing pin.
1PC tensioning tool.
1PC camshaft setting tool.
TG0128
(FIAT 1.9D/TD)
Benz/Chrysler/Jeep Engine
Timing Tool Set
To prevent the engine shafts (e.g. camshaft, crankshaft) form
turning or to keep them in a specific position and TDC adjust
the timing belt tensioner when changing a timing belt or during
other engine repairs.
Applicable for Opel 1.9 CDTI diesel engines(Z19DT,Z19DTH)
e.g. Opel Vectra, SIGNUM...etc.
For use on FIAT 1.9D/TD with Peugeot engines on Brava,
Bravo, Marea and Marea weekend models (96-).
TG0131
Audi Crank Locking Pin
For VW & Audi 2.0 FSI and TSI petrol engines since 2003.
With camshaft tools, chain tensioner retainer, locking pins and
tensioner bolt.
Applicable:
Audi A3 2.0 FSI and FSI SOHC engine.
Engine codes
AWA. BHD. BMB.
VW Golf 2.0 TSI, 2.0 TSI SOHC and TOURAN 2.0 TSI SOHC.
Engine codes
AWA, AXW.
www.handyforce.com
TG-164
A timing tool set which covers a large of models in the
Mercedes range including petrol and diesel engines.
Set includes flywheel plate locking tools and camshaft locking
pin set.
Also suitable for Chrysler PT cruiser 2.2 CRD and Jeep Grand
Cherokee 2.7CRD.
Size: M14 x P1.5.
Suitable for AUDI A6 2005 6 cylinder engine 2.4 liter and 3.2
liter FSI.
TG-165
www.handyforce.com
TIMING SERVICE TOOL
TG0140
VW 3 in 1 Bosch VE Fuel Injection
Pump Adapter Timing Tool
Bosch diesel injection pump timing indicator tool.
Dial indicator and holder.
Tools are used for the accurate setting of the Bosch diesel fuel
injection pump timing.
The holder screws into the back of the injection pump, giving
a dial indicator reading necessary for setting the correct pump
timing.
This set comes complete with the correct tools for the job.
Applicable:
Bosch VE fuel pump, Diesel pumps.
Indicator Holder for both size shanks.
Also works with 1981-1986 Volvo 6 cylinder 2.4L diesels, 19891994 Dodge 6 cylinder 5.9L diesels.
TG0143 Timing Gear Puller
Removes timing gears and other gears with tapped holes.
Drop forged yoke is plated to resist corrosion.
Heat treated center screw.
Includes two piece 5/16” x 4” (L) bolts.
TG0150
TG0141
VW and AUDI Crank Locking Pin
Engine Timing Tool Set-CITROEN
& PEUGEOT
while replacing the timing belt or removing the crankshaft bolt.
Applicable:
VW and AUDI models with 2.7 and 2.8 liter V6 engines.
Size: M18 x 1.5.
TG0142 AUDI Crank Locking Pin
Applicable:
AUDI 3.0L V6 5 valve engine.
Size: M12 x 1.5.
www.handyforce.com
Applications:
This comprehensive set tool enables the correct engine timing
Suitable for use on the most of recent cars with either HPI
(petrol) OR HDI (diesel ) engines.
Citroen: AX, BX, ZX, XM, VISA, SAXO, XSARA, XANTIA
Synergie/Evasion,
Berlingo, Jumpy, C15, C25, Picasso, C5.
Peugeot: 106, 205, 305, 306, 307, 309, 405, 406, 605, 607,
Expert, Partner, Boxer.
TG-166
TG0147
Timing Tools-RENAULT
TG0149
Applications:
This timing tool kit of three specific components enables the
position to be held on K4J, K4M & F4P, F4R twin cam 16V
engines.
This new camshaft pulley setting tool holds two pulleys in place
whilst changing the cam belt.
This tool is bolted to the center of the cams using the existing
bolts.
TG0151
Petrol Engine Twin Camshaft
Setting / Locking Tool Kit
Additional Information:
Applicable for VW-AUDI 1.4L and 1.6L FSI petrol engines
(engines code: AXU, BAG, BKG, BLF, BLN, BLP) Audi A3,
Skoda OCATVIA, VW Polo, Golf, Golf Plus, TOURAN.
To check and adjust camshaft timing.
Required when replacing timing belts or timing chains or during
engine repairs.
TG0154
Timing Assortment for Fiat 1.3
Multi Jet Engine
Diesel Engine Timing Tool Set
Applications:
An engine timing locking tool set Fiat DUCATO 2.3JDT this kit
includes the latest crankshaft timing pin required from 20062008.
The 2.3 JTD twin camshaft common rail diesel engines is belt
driven between crankshaft and inlet camshaft but utilizes a
chain to connect both camshaft.
The high pressure fuel pump does not require timing.
Follow all the manufacturers’ specified procedures in
preparation to remove the worn or damaged timing belt.
F1AE0481C, F1AE0481D, F1AE0481N 2002 – 2008
Fiat DUCATO 2.3 JTD Multi Jet 120
02-06
06-08
06
F1AE0481C,
F1AE0481D,
F1AE0481N
F1AE0481C,
F1AE0481D,
F1AE0482N
F1AE0481D
Applications:
FIAT-LINCIA 1.3 MULTIJET / OPEL 1.3 CDTI.
Applicable:assortment for HYUNDAI, MAZDA, MITSUBISHI
HYUNDAI:SONATA.
MAZDA: 626, 323, PREMACY
MITSUBISHI:CARISMA, SPACE STAR, SPACE WAGON,
GALANT, SIGMA, PAJERO.
TG0157
Timing Belt Tensioner Tool
Application:
This timing belt tensioner is designed specifically for later
models of CITROEN / PEUGEOT.
Models. 6mm square.
TG-167
www.handyforce.com
TIMING SERVICE TOOL
TG0158 Engine Timing Tools-VW & AUDI
Applications:
AUDI: A4, A6, A8, A 11 road (97-04).
VW: PASSTA (98-04).
Engines codes: AFB, AKE,AKN, AYM, BAU, BCZ, BDG, BDH,
BFC.
Diesel Engines/Flywheel Locking
TG0164
Tool Set For FORD
TG0153 Diesel Engines Locking Tools Set
For OPEL, RENAULT, NISSAN, 1.5/1.9/2.2/2.5 DCI(VANS).
Applicable
Renault:Clic, Megane, Scenic, Lanuna, Espace, Kangoo,
Trafic, Master (99-04).
Nissan:Micra, Kubistar, Primastar, Interstart.
Opel:Vivaro , Movano
Engine codes: 1.5, 1.9, 2.2, 2.5DCI. (K9K, K9Q, GT9, G9U)
To prevent the engine shafts (camshaft, crankshaft) from
turning belt tensioner when changing a timing belt or during
TG0148 Engine Timing Kit-FIAT
TG0156 Engine Timing Tools
Applications:
Applicable for Fiat 1.2 16V twin cam petrol engines (engine
code: 176 B9.000, 182 B2.000 and 188 A5.000) e.g. FIAT
PUNTO, BRAVA and BRAVO.
To determine the specified piston position and prevent the
camshafts from timing or hold them in position when changing
the timing belt or during other engine repairs.
For BMW
Application:
This set enables the correct timing to be made when servicing
BMN M47 2.0 16V Engines E46 318D 320 D 330D, E39 520D
525D 530D and E38 730D.
TG0161
TG0160 Engine Timing Tools-VAG
Engine Timing Tool Set-Citroen &
Peugeot
TG0152 Engine Setting / Locking Tool Kit
Applications:
Engine FORD Fiesta 1.8D Turbo, Focus 1.8D, Focus2.0D,
Focus1.6TI
Flywheel Locking Tool
Focus 2.0 TDCI
Focus 2.0 C Max 2.0 TDCI
Focus 1.6 Ti-VCT
Focus C Max 1.6 Ti-VCT
Fiesta 1.8D Turbo
Focus 1.8 TDdi/TDCI
Application:
G6DA
HXDA
C9DC RTN RTP RTQ
Chain engines
BHDA/B C9DC
C(DA/B FFDA F9DA/B
KKDA – Chain engines
Focus C Mac 1.8 TDCI
KKDA – Chain engines
Toumeo Connect 1.8
TDdi/TDCI
BHPA HCPA HCPB
Chain engines
Transit Connect 1.8
TDdi/TDCI
BHPA HCPA HCPB
Chain engines
www.handyforce.com
For Renault/Nissan & Vauxhall/Opel 2.0 DCI.
TG0162 Engine Timing Tools-GM
Applications:
Nissan Primastar (08-09), Qashqai (08-09), X-Trail (07-08),
Renault (08-09), Koleos(08-09), Laguna (05-08), Mengane (0708), Scenic (08-09), Trafic(07-08), Vel Satis(08-09), Vauxhall/
Opel Vivaro(07-08).
Engine codes:
Nissan, M9R 780, 830, 832, 833.
Renault, M9R, 700, 721, 724, 740, 742, 446, 760, 761, 780,
802, 803, 805, 830, 832, 833.
Vauxhall/Opel: M9R 780, 782, 784.
TG-168
Application:
FORD 1.8 DURATEC-SCI.
This comprehensive set tools enables the correct engine timing
suitable for use on the most recent cars with either HPI(petrol)
or HDI (diesel )engines.
Applicable for Peugeot and Citroen, suitable e.g. for Locking
the flywheel / camshaft / crankshaft.
Removal and assembly of fuel injection pump and water pump.
Changing the timing belt.
Also suitable for identical engines in e.g. Fiat, Ford, Nissan,
Renault, Rover, Toyota, etc.
Applications:
1.4, 1.5, 1.7, 1.8, 1.9, 2.1, 2.5D / TD / TDI, 1.4 - 1.6 - 2.0 - 2.2
HDI
CITROEN:AX - ZX - XM - Visa - Xsara - Xantia - Dispatch –
Synergie / Evasion - Berlingo - Jumpy - C2 - C3 - C5 - Relay /
Jumper
PEUGEOT:106 - 205 - 206 - 305 - 306 - 307 - 309 - 405 - 406
-406 Coupe - 605 - 607 - 806 – 807- Express - Expert - Partner
- Boxer (ab 1986)
TG-169
www.handyforce.com
TIMING SERVICE TOOL
TG0169
TG0172
Camshaft Sprocket Puller For
FORD
Locking Tool Set Opel 1.3 CDTI
TG0159 Engine Timing Tools-GM
TG0155
Engine Timing Tools-VW & AUDI
w/ 4 Grooves and ALU Finish
Applications:
OEM 21-229, 303-651 puller for camshaft pulley.
ENGINES FORD: FIESTA 1.8D Turbo (98-) FOCUS 1.8D (98-).
Engine Timing Tool Set - FORD
TG0170
& MAZDA
Applications:
VAUXHALL / OPEL 1.3 CDTI common rail VAUXHALL / OPEL
CORSA, COMBO Z13DT engine.
To prevent the engine shafts (e.g. camshafts, crankshaft) from
turning or to keep them in a specific position and to adjust the
timing belt tensioner when changing a timing belt or during
2PCS locking tool for camshaft
1PC locking pin for crankshaft
1PC locking pin for chain tensioner
Applications:
This set of timing tools enables the correct timing position to be
made when servicing GM ECOTEC 2.0 engines.
Applications
Camshaft setting/locking plates are used to accurately align
a datum slot, located in the end of the camshaft, with the top
face of the camshaft housing to hold the camshaft at the (TDC)
top dead center position.
Locking pins are designed to pass through datum holes in
the timing belt pulleys into fixed position timing holes on the
engine.
The crankshaft TDC location pin is designed to screw into
the cylinder block and provide a stop for the crankshaft to be
positioned against to set the TDC position.
Crankshaft locking tools are used to set the crankshaft timing
position during both removal and replacement of the timing
belt.
Flywheel locking tool is required on engines where the flywheel
and crankshaft must be held at the correct timing position this
tool is used in conjunction with the appropriate TDC setting
screw.
A special four piece kit containing the necessary special pins
required to lock the camshaft sprocket, flywheel and align the
crankshaft and fuel pump when checking the valve timing on 2.0
& 2.4 liter chain driven engines and or
replacing the timing belt on 1.4 liter engines.
www.handyforce.com
For OPEL / RENAULT / NISSAN 1.5/1.9/2.2/2.5 DCI
To prevent the engine shafts (camshaft,crankshaft) from
Applicable:
Renault:
Clic, Megane, Scenic, Lanuna, Espace, Kangoo, Trafic, Master
(99-04).
Nissan:Micra, Kubistar, Primastar, Interstar.
Ope:Vivaro, Movano engine:1.5, 1.9, 2.2, 2.5DCI.
(K9K,K9Q,G9T,G9U).
TG-170
Models:
Applications:
AUDI: A4, A6, A8, A11 yoad (97-04).
For VUAXHALL/OPEL VECTRA 2.0D turbo.
VW: PASSAT (98-04)
SINTRA 2.2D turbo.
Engines codes: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH
ZAFIRA 2.0D turbo.
and BFC.
FRONTERA-B 2.2D turbo.
2PCS 4 grooves and ALU finish locking tools.
SAAB 9-3 2.2D turbo.
TG0163 4PCS Camshaft Locking Pin Set
Applications:
Applications:
A special 4 piece kit containing the necessary special pins
pumps Bosch EP/VE Rotory, Kikki, Nippon, Denso, Cav
required to lock the camshaft sprocket, flywheel and align the
Rotodiesel, top entry these fuel pumps will be found on the
crankshaft and fuel pump when checking the valve timing on 2.0
following vehicles with diesel engines.
and 2.4 liter chain driven engines and or replacing the timing
Suitable for ALFA ROMEO, AUDI, BMW, SAIHATSU,
belt on 1.4 liter engines.
FIAT, FORD, ISUZU, IVECO, LANCIA, LAND ROVER,
Model:FIESTA / FUSION 1.4 TDCI 02-04, Mondeo 2.0 TD /
MAZDA, MITSUBISHI, NISSAN, RENAULT, ROVER and
TDCI 00-03 Transit 2.4D 00-03.
VOLKSWAGEN.
TG-171
www.handyforce.com
TIMING SERVICE TOOL
TG0167
TG0174
Petrol Engine Twin Cams Tool
Kit(Chain)
Engine Timing Tools-VW & AUDI
TG0166 Petrol Twin Cam1.6 16V Tool Kit
TG0179
Timing Tool For Camshaft
Regulation
Applications:
Applications:
Models: CORSA, AGOLA, ASTRA, MERIVA (97-04) ENGINES:
1.0 12V., 1.0 16V, 1.4 16V(chain).
Codes: X10XE, ZI0XE, Z10XEP, X12XE, Z12XE, Z14XEP.
AUDI: A4, A6, A8, A11 road(97-04)
VW: PASSAT: (98-04)
Engines codes: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH,
BFC.
TG0171
Engine Timing Tool
(Petrol 2.2 16v Chain)
TG0178
www.handyforce.com
Engine Timing Tool Set-Renault 1.4 , 1.6 16V
Applications:
This kit of three tools enables the correct engine timing to be performed on
Renault K4J, K4M & F4P, F4R engines when changing the timing belt.
Water Pump Tool For Opel 2.2 16V
Applications:
Petrol 2.2 16V (chain) – timing.
Models: ASTRS, VECTER, VX220, ZAFIRA & SIGNUM (00-04)
Explanation: retains position of coolant pump sprocket during
replacement of pump, maintaining engine timing.
TG0175
Applications:
RENAUFT ESPACE 2.2DCI, MASTER 2.2 / 2.5 DCI
Timing Tool Kit – RENAULT
Applicable for OPEL Twin Cam 2.2 16V petrol engines (Z22SE)
e.g. Astra, Signum, Speedster, Vectra and Zafira etc.
To lock or position the camshaft and the timing chain tensioner
during engine repairs.
TG0177
Applications
Models: BRAVA/BRAVO, MAREA/WEEKEND STILO,
MULTIPLA & PALIO WEEKEND(95-04).
ENGINES: 178B3.000, 182A4.00, 182A6.000 & 182B6.000.
Applications
Clio 1.2/1.4, Megane 2.5D/TD, Clio 1.4/1.6/1.8 16v, Megane
1.4/1.6/2.0/ 16v,
Clio Sport2.0 16v, R19 1.4, Clio Williams 2.0 16v, R19 1.4 Eco,
Espace 2.0, R19 1.8 16v, Espace 2.0 16v, Rapid 1.4, Espace
2.2 TD, Safrane 2.0 16v,
Express 1.4, Safrane 2.2 TD, Extra 1.4, Safrane 2.5 20v,
Kangoo 1.2/1.4 , Scenic 1.4/1.6/2.0 16v, Laguna 1.6 16v, Trafic
2.5D, Laguna 1.8/2.0, Twingo 1.2, Laguna 1.8/2.0 16v, Laguna
2.2 D/TD, Laguna 2.5 D/TD.
TG-172
CLIO
LAGUNA
MEGANE 1.4/1.6 16V
CHAMADE 1.9D
LAGUNA 1.9 TDI
R20 2.0 8 & 12V
CLIO 1.2/1.4/1.6 16V/1.7
MASTER 2.0/2.2 8 & 12V
R20 2.0 8 & 12V
CLIO 1.8/1.8 16V/1.9D/TD
MASTER 2.1D/2.5D/2.8D/TD
R21 1.7/1.9D/DT
CLIO SPORT 2.0 16V
MEGANE 1.4/1.6 16V
R21 2.0 8 & 12V/TURBO
CLIO VAN 1.9D
MEGANE 1.9D/TD/2.0 16V
R25 D TURBO
CLIO WILLIAMS 2.0 16V
R5 1.6D/1.7
R25 2.0 8 & 12V
ESPACE 2.0/2.2 8 & 16V/DT
R5 1.9D
R30 D TURBO
EXPRESS 1.9D
R9 1.6D
RAPID 1.9D
EXTRA 1.9D
R11 1.6D/1.7
SCENIC 1.4/1.6/2.0 16V
FUEGO TURBO
R18 1.7/DT
SCENIC 1.9 TD
KANGO 1.2/1.9 TD
R18 FUEGO 2.0 8V
TRAFIC 2.0/2.2 8 & 12V
LAGUNA 1.6 16V/1.8/1.8 16V
R19 1.8 16V/1.8/1.9DT
TRAFIC 1.7/2.1 D
LAGUNA 2.0 16V/1.9/2.0 TD
R20 D TURBO
TWINGO 1.2
TG-173
www.handyforce.com
TIMING SERVICE TOOL
TG0182 Diesel Engine Setting Kit
TG0185 Diesel Engine Setting Tool Kit
TG0180 Petrol Engine Setting Tool Kit
TG0181
Crankshaft Locking Tool
Applications:
Applications:
Crankshaft locking tool for VW, AUDI, FORD, SEAT SKODA
Anodized finish for corrosion protection.
Instructions for use are printed inside this
card.
For vehicles without this type of sump pan,
use the flywheel TDC setting tool.
Applicable for Opel 1.9 CDTI diesel engines(Z19DT, Z19DTH)
Secure the tool to the cell housing bent in
e.g. OPEL VECTRA SIGNUM…..etc.
towards the flywheel ting gear.
To prevent the engine shafts (e.g. camshaft crankshaft) form
Align the TDC mark on the flywheel with
pointer.
Any other use of these tools than that
described in the section above is considered
TG0183
as misuse.
On vehicles from 1998 on the injection
Applications
4-ZYL
VW group 1.2 single (6V) and twin camshaft (12V) SKODA,
TDI PD engines.
FABIA, VW, POLO.
Injection pump pulleys pin to lock injection pump drive pulley.
Engines Code AWY and AZQ.
Also for VW-AUDI, SEAT, SKODA, 1.9D SD, SDI, TD and TDI.
TG0176 Engine Timing Tool Set-Renault 1.4 , 1.6 16V
VW AUDI 1.4/1.6 Camshaft
Alignment Tool
pump locking pin is required as part of the
procedure.
With the TDC set up, pass the locking pin through the hole in
the timing pump gear and locate it.
Applications:
This kit of three tools enables the correct engine timing to be performed
on Renault K4J, K4M & F4P, F4R engines when changing the timing
belt.
Applications:
Description: both camshaft drive pulleys.
Applicable for VW/AUDI 1.4 / 1.6L petrol engines.
VW LUPO, POLO, GOLF IV, BORA/AUDI A2.
TG0186 VW Cam Setting Plate Tool Set
Applications:
ASTRA VECTRA VX2200 ZAFIRA & SIGNUM(00-04)
Retains position of coolant pump sprocket during replacement
Applicable
of pump, maintaining engine timing.
VW POLO, CLASSIC,GOIF,BORA, BEETLE, CADDY(97-04)
Engine code: K9K, G9T, G9U.
1.9 SDI/TDI.
www.handyforce.com
TG-174
CLIO
LAGUNA
MEGANE 1.4/1.6 16V
CHAMADE 1.9D
LAGUNA 1.9 TDI
R20 2.0 8 & 12V
CLIO 1.2/1.4/1.6 16V/1.7
MASTER 2.0/2.2 8 & 12V
R20 2.0 8 & 12V
CLIO 1.8/1.8 16V/1.9D/TD
R21 1.7/1.9D/DT
CLIO SPORT 2.0 16V
MEGANE 1.4/1.6 16V
R21 2.0 8 & 12V/TURBO
CLIO VAN 1.9D
MEGANE 1.9D/TD/2.0 16V
R25 D TURBO
R5 1.6D/1.7
R25 2.0 8 & 12V
ESPACE 2.0/2.2 8 & 16V/DT
R5 1.9D
R30 D TURBO
EXPRESS 1.9D
R9 1.6D
RAPID 1.9D
EXTRA 1.9D
R11 1.6D/1.7
SCENIC 1.4/1.6/2.0 16V
FUEGO TURBO
R18 1.7/DT
SCENIC 1.9 TD
KANGO 1.2/1.9 TD
R18 FUEGO 2.0 8V
TRAFIC 2.0/2.2 8 & 12V
LAGUNA 1.6 16V/1.8/1.8 16V
R19 1.8 16V/1.8/1.9DT
TRAFIC 1.7/2.1 D
LAGUNA 2.0 16V/1.9/2.0 TD
R20 D TURBO
TWINGO 1.2
TG-175
www.handyforce.com
TIMING SERVICE TOOL
TG0168
Diesel Timing Tool Kit- Opel &
Isuzu
TG0187
Crankshaft Locking Tool w/
Steel Plate
Applicable:
VW, AUDI, FORD, SEAT, SKODA 3 and 4 cylinder (1.2, 1.4, 1.9,
2.0 TDI PD engines).
TG0188
Applications:
Camshaft Locking Tool For
Opel
OPEL engines:ASTRA, CAVALIES, VECTRA-A(87-00),ISUZU,
N O VA , C O R S A / C O M B O , S T R A , C AVA L I E R , V E C T R A ,
FRONTERA, MONTEREY,MIDI,BRAVA (88-04).
Applications:
This tool set allows the precise location of the crankshaft in the
TDC-Position against the fly-wheel.
TDC-Locking Tool for Crankshaft
Application: Astra 1.7 D up to 97’Adjusting Tool for the TDCMarking on the flywheel.
Locking Pin for Flywheel/Crankshaft
Application: Astra 1.7 D from 98’ Pin fir locking the crankshaft
in the TDC-Position.
Locking Tool for Flywheels
Application: Opel/Vauxhall Diesel-Engines (Isuzu) With 1.5 and
1.7 and for Opel/Vauxhall fuel-engines (OHC) from 1.2 to 2.0.
TG0191
Engines code(OPEL):16DA,17D,17DR,X17DTL.
Engines code(ISUZU):4EC1, 4EE1, 4JB1, 4XJ1, 4JA1, 4JG1,
TG0192 8PCS Timing Locking Tool Kit
Engine Timing Tool Set-OPEL/
VAUXHALL
TG0190
Applications
For holding camshaft in place.
Application for VAUXHALL, OPEL. SAAB, ROVER, XSARA,
ISUZU.
TG0196 Crankshaft Locking Tool-VW
2PCS Locking Tool Set
4FC1, 4FD1, 4FG1, Z17DT, Y17DT/DTL.
TG0146 Diesel 2.0 &2.4 TDDI-TDCI(Chain)
Application :
Astra F 1.6/1.7D/DT, Astra G 1.7D, Astra Max 1.6/1.7D, Astra
Van 1.6/1.7D,
Ascona C 1.6D, Belmont 1.6/1.7D/DT, Cavalier 1.6/1.7D,
Kadett E 1.6/1.7D,
Vectra A 1.7D.
TG0189
Crankshaft Locking Tool w/
Steel Plate
Application: VW-AUDI 2.0L TDI engines with oval crankshaft,
timing-belt pulley.
Code: BDK, BKE, BLB, BMA, BMM, BMP, BMR, BNA, BPW,
Applications:
This tool set can be used for locking the camshaft wheels
BRE, BRF, BRC, BUZ, BVE…etc.
together.
Therefore preventing the camshaft from turning whilst the gear
belt is removed.
TG0197
Petrol Engine Setting-Locking
Tool Kit
Consists of:
(A) Locking extractor for camshaft OPEL 1.4 / 1.6L 16V.
(B) Locking extractor for camshaft OPEL 1.8L 16V / 2.0L 16V.
TG0198 Timing Lock Pin Tool
To prevent the engine shaft (e.g. camshaft, injection pump
shaft, crankshaft) to keep them in a specific position when
changing a timing belt or during other engine repairs and to
remove and replace the injection pump.
Applications:
Mondeo & Transit (01-04) engines 2.0 & 2.4 DURATORQ 16V.
Codes: FMBA/B, D5BA, ABFA, D3FA, D2FA, D4FA, F4FA.
www.handyforce.com
Applicable:
VW, AUDI, SEAT, SKODA 4-ZYL.
To lock injection pump drive pulleys.
VW-AUDI, SEAT, SKODA, 1.9D, SD, SDI, TD, AND TDI.
To position the camshaft VW-AUDI, FORD, SEAT, SKODA,
and TDI PD engines.
TG-176
Applications:
Applications:
Models: VW GROUP 1.2 single (6V) and twin camshaft (12V)
Holds crankshaft at TDC (top dead center) when removing and
3 cylinder petrol engines (02-) in SEAT LBIZA / CORDOBA,
installing toothed timing belt and flywheel / drive plate.
SKODA, FABIA, VW, POLO.
Use to lock the camshafts for installation of drive belt.
Engines code: AWY AND AZQ.
TG-177
www.handyforce.com
TIMING SERVICE TOOL
TG0194
VAUXHALL/OPEL Timing Tools
(DIESEL 1.9 CDTI)
TG0203
Engine Timing Tools-VW & Audi
w/4 Grooves ALU Finish
TG0201
Engine Timing Tool Set-CITROEN
& PEUGEOT
TG0195
Engine Timing Tool Set for FIAT
& OPEL
Applications:
Applicable for Opel 1.9 CDTI diesel engines (Z19DT, Z19DTH)
e.g. Opel Vectra, Signum…etc.
To prevent the engine shafts (e.g. camshaft crankshaft) form
TG0199 Camshaft Adjusting Socket
Application:
Applications:
MODELS:
AUDI: A4, A6, A8, A11 yoad (97-04)
VW: PASSAT (98-04)
Suitable for use on the most recent cars with either HPI(petrol)
Engines codes: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH
or HDI (diesel) engines.
and BFC.
Applicable:Citroen and Peugeot Twin Cam 16V Petrol engine
2PCS 4 grooves and ALU finish locking tools.
code “EW” (EW7J4, EW10J4, EW10J4S, EW10D-HPi,
Crankshaft Locking Tool For VW
TG0204
(2.0ST) Set
This timing tool kit is specifically designed for fiat chain engines
fitted to the very last VAUXHALL/OPEL 1.3 and 1.9 CDTI
models (2004 onwards)
TG0206 Belt Tensioner Locking Pins
EW12J4).
Citroen:Xsara/Picasso C4, C5, Evasion/Synergie, C8, Jumpy/
Dispatch
Peugeot:206, 307, 406/Coupe, 607, 806, 807, Expert.
Applications:
Special groove nut socket to turn the camshaft adjuster into
position.
Camshaft adjusting socket used to adjust variable valve timing
on the exhaust side camshaft to basic position.
Applicable: Audi 3.0L V6 5V.
Application: AUDI – AVK(2000~2004) – BBK.
Applications:
Timing belt tensioner pins-OEM No. T10115, T40011 and
Serpentine tension pin-T10060/A.
For use on LUPO, Polo 1.4 TDI PD, Golf, Bora, Polo 1.9 TDI
Applications:
PD Beetle, SHARAN 1.9 TDI PD, Passat 1.9 TDI PD, Audi A2,
For use on Volkswagen BORA, GOLF, LUPO & TDI.
A3 1.4, 1.9 TDI PD, A4, A6 1.9 TDI A4, A6, A8 ALLROAD 2.5
V6 TDI.
TG0205 Timing Tools VAG 2.0 TDI PD
Applications:
Models:
Applications:
AUDI: A4, A6, A8, A11 yoad(97-04).
Applications:
Timing tool Set for VAG 2.0Litre TDI PD DOHC engines fitted
VW: PASSAT (98-04)
VW-AUDI 2.5 TDI V6 and AUDI A8 3.3 TDI V8 engine.
to Audi A4, A6 Skoda Octavia ll and Volkswagen Golf, Golf
Application:
AUDI V6 petrol and V6 / V8 diesel engine.
Plus, Jetta and Touran models.
and BFC.
VW-AUDI, SEAT, SKODA 2.0 TDI PD.
www.handyforce.com
TG-178
TG-179
www.handyforce.com
TIMING SERVICE TOOL
TG0207 Engine Timing Tensioner Kit
TG0215 Engine Timing Tools Set
For Ford and Mazda.
Applications:
For most petrol and diesel engines.
A comprehensive range of tension lever and wrenches
required for changing the cam belt on most popular petrol and
diesel engines including:
Models:
Alfa Romeo
AUDI: A4, A6, A8, A11 yoad(97-04).
Fiat
VW: PASSAT (98-04).
Citroen
Peugeot
ZETEC petrol engine e.g. FORD Fiesta, Fscore /Oruon, Focus,
For FIAT, IVECO, PSA GROUP, FORD.
Puma, Sierra, Mondeo, Cougar, Couier/Kombi, P100 and
Applications
Mazda 121.
For engine 2.2L, 2.3L, 3.0L
Designed for pulling off the camshaft timing belt wheel and
Car models:
locking or positioning the engine output shafts such as the
new Fiat Ducato, Iveco, Dayli, Ford Transit Van, Peugeot,
camshaft and the crankshaft.
Boxer, Citroen Jumper equipped with these motors.
Required for changing the timing belt or for engine.
and BFC.
Renault
Volkswagen
TG0210
Applicable for FORD 1.8 D/TD/TDCI diesel and 1.25-2.0 16V
Applications:
Applications:
Timing Tools for VAG 1.8 Turbo
and 1.6 FSI
TG0219 Timing Tool Set
TG0214 26PCS Timing Tool Set
Applications:
For OPEL / VAUXHALL(GM).
Applications:
For VAG 1.8 Turbo and 1.6 FSI chain driven engines.
Applications:
For OPEL / VAUXHALL (GM).
Changing the timing belt Suitable for identical engines in e.g.
Timing tools for Audi / Volkswagen / Seat / Skoda 1.8L 1.6L 2.0L
diesel engines.
Applications:
Saab, Renault, etc.
with chain driven engines.
Includes a special wrench for controlled turning of the exhaust
Locking the camshaft and crankshaft Removal and assembly
Locking the camshaft and crankshaft.
Contents:
camshaft sprocket when removing and installing the VANOS
of fuel injection pump and water pump.
Diesel engine 1.3CDTi 16V, 1.9CDTi, 2.0DTi, 2.2DTi
Tensioner pin.
unit.
Changing the timing belt.
Applicable for Agila, Combo-C, Corsa, Frontera, Omega,
Sprocket tool/chain tensioner.
Includes primary timing chain pre-load tool for tensioning the
Also suitable for identical engines in e.g. Saab, Renault, etc.
Sintra, Tigra, Petrol engine 1.0 12V / 1.2 16V(since 97) 1.4 / 1.6
Cam adjuster.
timing chain on M50 engines.
1.3 CDTi 16V, 1.9 CDTi, 2.0 DTi, 2.2 DTi.
/ 1.8 / 2.0 / 2.2 16V (since 95)
Camshaft alignment tool/pins.
M22 Threaded for M42/M60 Engines.
Passed for z.B., Agila, Astra, Combo-C, Corsa, Frontera,
Applicable for Agila, Astra, Corsa, Frontera, Omega, Sintra,
2PCS Camshaft holding tools.
M26 Threaded for M50/M52 Engines.
Omega, Signum, Sintra, Tigra, Vectra, Zafira.
Speedster, Tigra, Vectra, Zatira.
www.handyforce.com
TG-180
TG-181
www.handyforce.com
TIMING SERVICE TOOL
TG0217
TG0211
Timing Tools Kit
Applications:
Applications:
Timing tools for Ford 1.8 TDDI, TDCI from 2000 to 2006
including Fiesta, Focus, C-Max, Tourneo, Transit with chain
driven engines.
Petrol Engines:
FIAT Brava, Bravo, Barchetta, Cargo, Coupe, Marea, Palio,
Weekend, Punto, Multipla, Stilo, ldea Doble, twin can engines
1.2 1.4 1.6 1.8 16V.
TG0221 Engine Timing Tool Set For BMW
Diesel Engines:
FIAT Brava, Bravo, Marea/Weekend, Palio, Punto, Multipla,
Doblo, Ulysse, Ducato, Stili JTD diesel engines 1.9D/TD 1.9JTD
2.4TD/JTD.
TG0222
For Alfa Romeo.
For LAND ROVER, GM 2.5 TD5 engines.
Applications:
Applications:
This timing tool kit includes crankshaft holding tool, timing
chain compressor, injection pump puller, shaft puller timing
pins for 2.5 TD5 engines.
Applicable for Alfa Romeo twin spark 1.4, 1.6, 1.8, and 2.0L
16V twin cam petrol engines.
Engine code: 162.01, 322.01, 323.01, 323.10, 335.03, 671.06,
672.04 and 676.01 e.g.
Alfa Romeo 145, 146, 147, 155, 156, 166, Spider and GTV
Locking Screw for MercedesTG0229
Benz
To prevent the engine shafts (e.g. camshafts, crankshaft)form
turning or to keep them in a specific position when changing a
timing belt or during other engine repairs.
Injection Pump Extractor Tools
Kit / for BMW
TG0362 Engine Setting/Locking Tool Kit
Applications:
Injection pump locking screw, allows the injection pump to be
removed without the loss of pump timing.
Application : Mercedes engines OM602, OM604, OM605, and
Applications:
Applicable for BMW M47, M47TU, M57, M57TU engines.
Applications:
diesel engines.
Includes a special wrench for controlled turning of the exhaust
To lock the injection pump sprocket in position and press out
OM604 with a Lucas injection pump.
TG0228 Retaining Pin Set
the injection pump shaft.
This tool is required when removing the injection pump.
TG0223 Puller For Injection Pump-BMW
camshaft sprocket when removing and installing the VANOS
unit.
Includes primary timing chain pre-load tool for tensioning the
timing chain on M50 engines.
M22 Threaded for M42/M60 engines.
M26 Threaded for M50/M52 engines.
This set enables the correct timing to be made when servicing
Applications:
Applications:
BMW M47 2.0 16 engines.
Applicable for BMW 4 cylinder diesel engine (M41), 6 cylinder
To lock the automatic tensioner when Changing the Timing
E46 318D 320 D 330D
diesel engine 2.5 (M51) also for Opel/Vauxhall Omega 2.5 TD.
belt.
E39 520D 525D 530D
To loosen the injection pump pulley form the shaft when
0.8mm, 1.2mm, 1.4mm, 1.5mm, 1.8mm, 1.9mm.
E38 730D
dismounting the injection pump.
Alfa Romeo, Fiat, Citroen, Peugeot, Renault, Volkswagen.
www.handyforce.com
TG-182
For BMW/Land Rover & Vauxhall/Opel 2.5.
Applications:
BMW 318 1.7 tds E36 (94-00), 325 2.5 td/tds E36(91-99), 525
2.5 td/tds E34/E39 (90-00), 725 2.5 tds E38 (95-02), Land
Rover, Range Rover 2.5 (94-02), Vauxhall/Opel Omega-B 2.5
D Turbo (94-01)
Engine codes:
BMW: M41, M51
Land Rover: 256T M51,
Vauxhall/Opel: X25DT
TG-183
www.handyforce.com
TIMING SERVICE TOOL
For FIAT/ALFA ROMEO/LANCIA.
Applications:
Composed by: 23 adapters and 1 PC tool for variable valve timing rotation,
1PC tool for TDC.
For BMW N42 / N46.
Applications:
Suitable for the following applications camshaft installation
ART
CIL
CAMME
VETTURE
PZ
Engine
Type
8082A
2
A
Fiat Bravo/Brava-Lancia
Y10 1.4 12 valve
1
1400 12V
4
1370
NERO
8082B
3
2
A
S
Lancia K5 Cil 2.0 20V engine VIS
starting year 96’
2
2000 20V
5
1998
Silver
8082F
2
3
A
S
Fiat Bravo/Brava/Marea
-Lancia 1800 16V 115CV
Delra/Desra 1800 16V-1860 847/
C/2
2
1800 16V (113CV)
4
1747/1800
Green
8082G
2
3
A
S
Fiat Coupe/BarchettaLancia-Alfa 1800 16V 130CV
2
1800 16V
(130CV)
4
1747
Dark
Gray
8082H
3
2
A
S
Fiat Bravo/Brava/Marea
2.0 20V
2
2000 20V
5
2000
Pink
8082I
2
3
A
S
Alfa 145-146-147-156 1600 16V
Step “A”
2
1600 16V
4
1600
Violet
8082L
2
3
A
S
Alfa 145-146-155 1400/1600 16V e
1400 Step “A”
2
1600 16V(105CV)
1600 16V(120CV)
1400 16V(103CV)
4
1370/1598
Brown
4
1747/1970
Light
Blue
4
1598/1600
Smoke
Gray
Cylinder
Displacement
Color
Alfa 156 1800-2000 16V
2
8082N
2
3
A
S
Alfa 147 105CV
2
1600 16V(105CV)
8082P
2
3
A
S
Alfa 147-156-166-GTV
Spider GT 2000 JTS
16V 165CV
2
2000 JTS 16V
(165CV)
4
2000
Light
Green
2
1800 16V(132CV)
4
1747
Bronze
2
1600 ECO(103CV)
4
1600
Yellow
8082R
3
2
A
S
Alfa 147 1600 eco 103CV
engines:
E87: 118i / 120i – N46 engine.
Engine timing: checking and adjustmen.t
VANOS unit: removal, installation and alignment.
E90 / E91: 318i / 320i – N46 engine.
Suitable for the following applications camshaft installation
E85: Z4 2.0i – N46 engine.
and removal as well as removal and installation of the inlet
camshaft and carrier assembly valvetronic system.
Easily accessible operating instructions including cross
E87: 118i/120i - N46 engine.
E90/E91: 318i/320i/N46 engine.
E85: Z4 2.0i-N46 engine.
TG0241 Timing Belt Double Pin Wrenches
Applications:
Applications:
This five piece set is essential for replacing the cam belt on
Ford Focus/C Max 1.6 Ti-VCT with engine code HXDA (2003-
8082C
1
1
6
4
A
S
A
S
Alfa 3.0 V6 24 valve Lancia 3.0 V6
24 valves
4
3000 24V
V6
3000
Red
8082D
3
2
A
S
Lancia engine VIS 4 Cyl.
2
2000 16V
4
2000
Blue
8082E
3
2
A
S
Lancia 5 Cyl. Before year 1996
2
2400 20V
5
2400
Gold
TG-184
Applications:
For adjustment and arresting of the twin camshaft on petrol
For FOCUS and CMAX.
OPTIOALS “NOT INCLUDE”
www.handyforce.com
references to original part numbers.
For BMW N42 / N46 / N46T.
E46: 316i/316ti/318ti-N42 engine.
A
S
A
S
2
3
2
3
valvetronic system.
E46: 316i / 316ti / 318i / 318ti – N42 engine.
8082M
8082Q
camshaft and carrier assembly
BMW:
2000 16V(155CV)
1800 16V(144CV)
1800 16V(140CV)
2000 16V(150CV)
Fiat Coupe/BarchettaLancia Delta/Dedra Step ”A”, Fiat
Barchetta
/Punto HJT
(phase transformer
/variable geometry)1800 16V
and removal as well as removal and installation of the inlet
2007) plus 2.0 TDCi with engine codes G6DA, G6DB, G6DC
2003-2007.
Set includes camshaft sprocket holding Tool, tensioner pulley
locking pin, flywheel timing pin, crankshaft timing pin, camshaft
sprocket locking tool.
Also required flywheel locking tool and adaptors.
Use to adjust belt tension on 1999 and later VW Golf, Jetta,
Passat, and 1999-2003 VW Beetle with 2.0L gas engine and
1.9L TDI diesel engine.
Special Wrench for adjusting the belt tension on the following
Audi A6 1.6 (96 and newer) ALZ VW Polo Classic, Golf, Bora,
New Beetle 1.6(97 ) AEH, AKL, APF, AUR, AVU, AYD Golf,
Bora, New Beetle, 2.0(98 )AQY, APK.
VW engines codes: AEG, AVH, AZG, ALH, BDC.
TG-185
www.handyforce.com
TIMING SERVICE TOOL
TG0240
Timing Belt Double Pin
Wrenches
For BMW M42 / M44 / M50 / M52 / M54 / M56.
Applications:
This is the best quality pin wrench for easy adjustment of
camshaft spur belts (toothed belt) on idler pulleys with pin
holes.
E36: 316i BJ. 93-99/E46:316i
Bj. 99-04/316i Compact
Bj. 94-01 (M43)
E36: 318i Bj.93-99(M43)
E46: 318i Bj.98-04(M43)
E30: 318iS-16V,Bj. 89-91(M42)
E36: 318iS/Coupe Bj. 92-98/
318ti compact Bj. 94-98/(M42)
318iS/Coupe Bj. 96-99/
318ti compact Bj. 96-01/(M44)
320i Bj. 91-97
320i Bj. 91-99-Single Vanos
E36/E46: 320i Bj. 98-06-Twin Vanos(M52)
323i Compact Bj. 95-01Single Vanos
E46: 323i Bj. 98-01 - Twin Vanos(M52)
E36: 325i Bj. 91-97 /
325i Bj. 91-97 / Single Vanos
E46: 325i Compact Bj. 00-06 Twin Vanos
E38:
E46:
328i Bj. 95-99 - Single Vanos
328i Bj. 98-01 - Twin Vanos
E34: 518i Bj. 94-96(M43)
520i Bj. 89-96
E43: 520i Bj. 89-96 - Single Vanos
E60/61: Bj. 03-05 - Twin Vanos
E34:
E65/E66:730i Bj. 02-05 - Twin Vanos
E83: X3-2,5I Bj. 03-06 - Twin Vanos
X3-3,0I Bj. 03-06 - Twin Vanos
E53: X5-3,0I Bj. 99-05 - Twin Vanos
(M54)
Z3 - 1,8i Bj. 96-99
1,9i Bj. 99-03 (M43/M44)
2,0i Bj. 99-03 - Twin Vanos
(M52)
2.2i Bj. 00-03 - Twin Vanos
525i Bj. 89-96
525i Bj. 89-96 - Single Vanos
E39: 525i Bj. 00-03 - Twin Vanos
(M52)
(M52)
2,8i Bj. 97-99 - Single Vanos
(M52)
E85: Z4 - 2,2I Bj. 03-06 - Twin Vanos
2,5I Bj. 03-06 - Twin Vanos
3,0I Bj. 03-07 - Twin Vanos
This wrench with its protruding pins, grabs the center of the
idler pulley and rotates around the off center retaining bolt
allowing for easy belt tension
adjustment, tension pulleys on 4 cylinder Golf, Jetta, Passat
and Corrado, Audi 80.
For Alfa Romeo /FIAT / LANCIA.
Double Pin Wrench special steel, burnished, for idler pulley on
Applications:
toothed belt, distance of pins 18 mm diameter of pins 2.9 mm
Suitable for Alfa Romeo vehicle with 1.4, 1.6, 1.8, 2.0, 3.0L 4
for deep located idler
and 6 cylinder engine Alfa Romeo 145, 146, 147, 155, 156,
pulley on toothed belt on1,6 l diesel engine VW van T3 (up to
164, 166, GTA, GTV, Spider GT and Fiat / Lancia vehicle with
model 1991).
1.2, 1.4, 1.6, 1.8, 2.0L 4 and 5 cylinder engine, Fiat Panda,
Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla,
Barchetta Coupe, Lancia Dedra, Delta, Kappa, Lydra.
TG0239
3PCS Timing Belt Double Pin
Wrenches Tools Set
For BMW diesel engines M41, M51, M47 TU – M47 TU / T2, M57 / TU/T2 2.0i
/ 3.0i, year 1998 – 2008.
Applications:
Installation and removal of the camshaft / hydraulic chain tensioner.
Checking and adjustment of camshaft timing.
Easily accessible operating instructions including cross references to original
part numbers.
For BMW N42 / N46 / N46T
FOR VW and AUDI.
Applications:
Applications:
The belt tensioner roller has two holes in which the two pins
E36:
E34/E39:
E38:
E87:
E39:
E63:
Land Rover
318tds / 318tds Compact
Bj. 94-00 / 325td / tds Bj. 91-99
525td / tds Bj. 91-03
725tds Bj. 91-03 M47 / M47TU /
T2 / M57TU/T2
E38/E65/E66:
E83:
E53/E70:
730d
X3 , 2,0l d / 3.0l d
X5 , 3,0l d
E90/E91:
316i , 316ti , 318ci , 318ti , 320i
118d / 120d
E46:
520d / 525d / 530d
635d
3,0TD6 Bj. 2002-2006
www.handyforce.com
E60/E61:
Land Rover
Freelander
TG-186
318d / 318td Compact / 320td Compact / 320d /
330d
525d / 530d / 535d
2.5DT Bj. 1994-2002
2.0TD4 Bj. 2002-2006
of the double V159, VAG 3387, T10020 are inserted allowing
them to turn the belt tensioner roller and to tension the timing
belt.
Timing belt tensioner pins OEM No. T10115, T40011 and
serpentine tension pin T10060/A.
For use on Lupo, Polo 1.4 TDi PD, Golf, Bora, Polo 1.9 TDi
PD, Beetle, Sharan 1.9 TDi PD, Passat 1.9 TDi PD, Audi A2,
A3 1.4 and 1.9 T, A4, A6 1.9 TDi, A4, A6, A8, ALLROAD 2.5 V6
TDi.
For adjustment and arresting of the twin camshaft on petrol
engines:
Engine timing: checking and adjustment.
VANOS unit : removal, installation and alignment.
BMW: E87 118i/120i - N46 engine.
E46 316i/316ti/318ti-N42 engine.
E90/E91 318i/320i/N46 engine.
E85 Z4, 2.0i-N46 engine.
TG-187
www.handyforce.com
TIMING SERVICE TOOL
For-MINI ONE / COOPER / COOPER S.
Applications:
Applications:
Special design to fix the camshaft in TDC position.
Engine timing tool kit for BMW Mini One 2001-06(W10B16AA),
Applicable: BMW N42 and N46 engines.
Mini Cooper
Suitable for GM and SAAB V6 3.0L and 3.2L.
2001-06 (W10B16BA) and Mini Cooper S 2002-06
Applications:
(W11B16AA).
Engine timing tools set for General Motors and SAAB V6 petrol
Set includes camshaft sprocket holding tool, engine support
engines.
bracket and tensioner assembly tool.
Application:
For Audi, Seat, Skoda and Volkswagen engine.
Applicable:
Audi, Seat, Skoda, Volkswagen, 75HP (cylinders) 90HP,
100HP, 110HP, 115HP, 130HP, 150HP engine timing tool kit.
This tool kit is used to maintain petrol and diesel engines and
2002-2003 3.2L VIN N used in Cadillac CTS.
TG0237
1997-2001 3.0L VIN R used in Cadillac Catera.
2001-2007 3.0L VIN R used in Saturn L300 & LW300.
Engine Timing Tool Kit for
Renault 2.0
replace the timing belt on many models.
TG0252
1996-2003 3.0L used in SAAB 9.5.
VAG Petrol And Diesel Engine
Timing Kit
For Fiat 1.9 D/TD.
Applications:
This new set for use on Fiat 1.9d/Td models with Peugeot
engines manufactured from 1996 onwards.
Fiat 1.8 16v and 1.9/2.4 D/JTD engines in Brava/Bravo/Marea/
Marea Weekend/Punto/Stilo.
Engine codes: 182 A2.000, 182 A7.000, 182 B4.000, 188
A2.000, 188 A3000, 192 A1.000.
Applications:
Renault Laguna 2.0 IDE (2001-2005)/F5R engine includes
TG0248 Petrol Engine Locking Tool Set
camshaft setting bar TDC crankshaft timing pin.
TG0227 Two Pin Wrench for VAG
Applications:
pumps BOSCH EP/VE ROTORY, KIKKI, NIPPON, DENSO,
Applications:
For Fiat 1.8/2.0.
CAV ROTODIESEL and TOP ENTRY.
Covers most of the VAG group's petrol and diesel engines.
Applications:
These fuel pumps will be found on the following vehicles with
AUDI: 80, 100, A2, A3, A4, A6, TT.
For use on the popular petrol engines to enable the timing
diesel engines:
SEAT: Terra, Ibiza, Cordoba, Leon, Toledo, Inca & Alhambra.
pulleys to be locked into place whilst servicing the camshaft
Alfa Romeo, Audi, BMW, Daihatsu, Fiat, Ford, ISUZU, IVECO,
SKODA: Fabria, Felicia and Octavia.
and cam belt replacement.
VW: Lupo, Polo/Classic, Caddy, Golf, Jetta, Vento, Bora, New
Fiat Ulysee 1.8/2.0 Turbo Ducato 2.0.
Beetle, Passat, Sharan, Transporter & LT.
Engine codes: LFW, RFU, RGX, RFW.
LANCIA, Land Rover, Mazda, Mitsubishi, Nissan, Renault and
Volkswagen.
www.handyforce.com
Applications:
Tension lever for Volkswagen/Audi vehicles.
TG-188
TG-189
www.handyforce.com
TIMING SERVICE TOOL
TG0246 Engine Timing Tool Set-Renault
TG0250 Support Guide Set for VGA
TG0226
Reaction Wrench
(420mm long, adjustable)
For Renault-1.4 1.6 16V engines.
Applications:
This kit of three tools enables the correct engine timing to be performed on
Applications:
Renault K4J, K4M, F4P and F4R engines when changing the timing belt.
With access tight in the engine bay, the Volkswagen Audi
Group have designed the front end of certain vehicles to slide
forward giving more room for cam belt and engine timing
servicing.
These tools are used through the front panel allowing the front
panel to be slid forward and held in the service position.
LAGUNA
MEGANE 1.4/1.6 16V
CHAMADE 1.9D
LAGUNA 1.9TDI
R20 2.0 8 & 12V
CLIO 1.2/1.4/1.6 16V/1.7
MASTER 2.0/2.2 8& 12V
R20 2.0 8 & 12V
CLIO 1.8/1.8 16V/1.9D/TD
R21 1.7/1.9D/DT
CLIO SPORT 2.0 16V
MEGANE 1.4/1.6 16V
R21 2.0 8 & 12V/TURBO
CLIO VAN 1.9D
MEGANE 1.9 D/TD/2.0 16V
R25 D TURBO
R5 1.6D/1.7
R25 2.0 8 & 12V
ESPACE 2.0/2.2 8 & 16V/DT
R5 1.9D
R30 D TURBO
EXPRESS 1.9D
R9 1.6D
RAPID 1.9D
EXTRA 1.9D
R11 1.6D/1.7
SCENIC 1.4/1.6/2.0 16V
Applicable:
FUEGO D TRUBO
R18 1.7/DT
SCENIC 1.9 TD
FIAT Punto 1.7D/TD(1996-1997) diesel engines with an
KANGOO 1.2/1.9 TD
R18 FUEGO 2.0 8V
TRAFIC 2.0/2.2 8 & 12V
LAGUNA 1.6 16V/1.8/1.8 16V
R19 1.8 16V/1.8/1.9DT
TRAFIC 1.7/2.1 D
LAGUNA 2.0 16V/1.9/2.0 TD
R20 DTURBO
TWINGO 1.2
Diesel Engine Camshaft Locking
Tools
With inter-changeable tips and several hole intervals.
Suitable for all timing pulleys with holes form minimum
Ø12mm. e.g. VW-Audi, Ford, Opel, Peugeot, Renault, Citroen,
Rover, Volvo, Japanese vehicles, etc.
To prevent the pulley on camshafts, Injection pumps…etc. .
CLIO
TG0249
Applications:
TG0254 Diesel Engine Locking Tool Set
from rotating when loosening the central fastening bolt etc.
A selection of tip diameter and hole intervals are available to
make the wrench almost universal in its range of application.
TG0258
Engine Timing Tool Set for VAG
2.4D
For Fiat PUNTO 1.7D / TD.
adjustable camshaft timing belt pulley.
Engine codes: 176 B3.000, 176 A3.000, 176 A5.0000.
Applications:
Set of engine timing locking tools for use on Volkswagen 2.4D
with engine codes AAB, AJA (02/95-03).
The correct alignment is achieved by placing equal thickness
of shims between both ends of the bracket and the cylinder
head.
Camshaft setting strap is used to set the correct timing position
of the camshaft.
For VGA / FORD / VOLVO.
The center part of the bracket fits into the slotted end of the
Applications
camshaft and the ends of the bracket locate on the cylinder
The diesel timing kit is a set of essential tools for setting and
For Land Rover and Jaguar.
locking the camshaft and crankshaft when changing the timing
Applications:
belt on Audi Seat Volvo and Volkswagen diesel engines.
Applications:
5 piece timing kit consisting of flywheel locking equipment
Injection pump pulley setting spigot is 15.4mm in diameter and
The kit also forms a part of the engine timing & locking and the
and camshaft timing pins for Land Rover Discovery 2.7 TDV6,
is used on engines with a one piece injection pump sprocket.
comprehensive diesel engine and fuel pump timing & locking
Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi withV6
The crankshaft damper holding tool prevents the damper from
kit.
Suitable for Covers, Citroen, Fiat, Ford, Opel, Peugeot,
engines (with automatic and manual tensioners).
rotating whilst unfastening and refastening the center bolt.
Renault, Rover, Vauxhall, Volkswagen.
This tool should be used with 3/4”D power bar.
www.handyforce.com
TG-190
head.
TG-191
www.handyforce.com
TIMING SERVICE TOOL
TG0253 Crankshaft Locking Tool-VW
Applications:
VW, AUDI,SEAT,SKODA 2.0 TDI PD.
For Fiat TIPO 1.9TD, DUCATO 1.9TD, TEMPRA 1.9TD(1987-
For Fiat TIPO 1.9D, DUCATO 1.9D, TEMPRA 1.9D(1987-
1998).
1998).
Applicable:
Applicable:
FIAT 1.9TD, DUCATO 19TD, TEMPRA 1.9TD diesel engines
FIAT 1.9D, DUCATO 1.9D, TEMPRA 1.9D diesel engines with
with an adjustable camshaft timing belt pulley.
an adjustable camshaft timing belt pulley.
Engine codes: 149 B1.000, 160 A6.000, 160 A7.000, 160
Engine code: 149 B1.000, 160 A6.000, 160 A7.000, 160
D1.000, 230 A2.000, 230 A3.000, 230 A4.000, 280 A1.000.
D1.000, 230 A2.000, 230 A3.000, 230 A4.000, 280 A1.000.
TG0257 Diesel Engines Timing Tool Set
TG0260 Camshaft Alignment Plate Tools
For Fiat 1.9 JTD 16V multi jet engines.
Engine codes: 192 A5.000, 192 B1.000, 937 A5.000, 939
A2.000.
TG0267
For VW and AUDI.
Applications:
VW 3-in1 Bosch VE Fuel Injection
Pump Adapter
Camshaft locking tool for Volkswagen Golf, Bora 2.3,
Vento, Corrado 2.8/2.9, Passat 2.3/2.8/2.9, Sharan 2.8 and
Transporter 2.8.
For Fiat 1.7D/1.7TD 1.9D 1.9TD.
Applicable:
FIAT Punto 1.7D/TD, TIPO 1.9D, DUCATO 1.9D, TEMPRA 1.9D, TIPO
Applicable: VW- Passat, VR-6
1.9TD, DUCATO 19TD, TEMPRA 1.9TD diesel engines with an adjustable
Engine codes: AAA,ABV,AES,AGZ,AMY,AZX.
camshaft timing belt pulley.
Applications:
Punto 1.7D
Punto 1.7TD
TIPO 1.9D
TEMPRA 1.9D
DUCATO 1.9D
TIPO 1.9TD
TEMPRA 1.9 TD
www.handyforce.com
Dial indicator and holder
1996-1997
176 B3.000
176 A3.000
176 A5.000
1987-1998
149 B1.000
160 A6.000
160 A7.000
160 D1.000
230 A2.000
230 A3.000
230 A4.000
280 A1.000
149 B1.000
160 A6.000
160 A7.000
160 D1.000
230 A2.000
230 A3.000
230 A4.000
280 A1.000
1987-1998
TG-192
timing.
Contents:
Metric dial indicator, plus holder plus extension pins (2) making
the timing easy to set, as the timing has a range from 0.83mm
to 1.15mm.
For use on VW and Audi diesels engines.
For VW and AUDI FSI 2.0 liters turbo engine.
Indicator holder set - suitable for timing Bosch VE injection
Applications:
pumps.
With camshaft tools, chain tensioner retainer, locking pins and
Includes M8, M10, and M12 adapters.
tensioner bolt.
To be used in conjunction with dial gauge.
For 2.0 FSI petrol engines since 2003 in Audi A3 2.0 FSI and
Applicable: Bosch VE fuel pump, diesel pumps.
FSI SOHC engines codes AWA, BHD, BMB VW Golf 2.0 FSI
Indicator holder for both size shanks
and 2.0 FSI SOHC and TOURAN 2.0 FSI SOHC engine codes
Also works with 1981-1986 Volvo 6 cyl 2.4L diesels, 1989-1994
AWA, AXW.
Dodge 6 cyl 5.9L diesels.
TG-193
www.handyforce.com
TIMING SERVICE TOOL
TG0259
Universal Sprocket Locking
Device
For twin cam and quad cam engines.
Applications:
Applications:
Universally adjustable for toothed pulleys spaced between
approximately 5mm to 85 mm apart.
For engines with twin camshafts (Citroen, Fiat, Ford, Honda,
Renault, Rover, Saab, Subaru, Toyota, Volvo) and for diesel
engines to lock the camshaft and injection pump (VW, Audi,
Special design to locate camshaft in TDC position.
TG0266
BMW Twin Camshaft Setting Tool
Kit
Applications:
Applicable for BMW N51/N52 engines.
BMW N40 and N45(T) twin camshaft petrol engines.
BMW Camshaft Alignment Tool
TG0264
Set
3 Series 316i E46/E90, 316Ci. E46, 316ti E46.
TG0268
VW Bosch VE Fuel Injection
Pump Adapter
Applications:
1 Series 116 E81/E87.
This set has a dial gauge with an 8mm shank.
Dial indicator and holder
Ford, Seat, Skoda).
By inserting the locking tool in the drive pulleys it is during
repairs or changing the timing belt.
timing.
TG0272 BMW M62 VANOS Camshaft Tool
Contents:
Metric dial Indicator, plus holder plus extension pins (2) making
the timing easy to set, as the timing has a range from 0.83mm
to 1.15mm.
For use on VW and Audi diesels.
Indicator holder set suitable for timing Bosch VE injection
pumps.
Includes M8, M10, and M12 adapters.
To be used in conjunction with dial gauge.
Applications:
Applicable for BMW engine models N62 and N73.
Use the tool to fix on the input/output crankshaft to adjust the
interval of crankshaft.
It could check the crankshaft interval (smaller than 0.5mm).
Contents:
BMW V8 (M60/M62) Camshaft Locking Fixture Tool
Applications:
Applicable:
For Renault 1.5DCI and 1.9 DCI engines.
Bosch VE fuel pump, diesel pumps, indicator holder for both
Operating instruction:
size shanks.
Always refer to the maintenance manual supplied by the
Also works with 1981-1986 Volvo 6 cyl 2.4L diesels, 1989-1994
vehicle manufacturer.
Dodge 6 cyl 5.9L diesels.
TG0274 Camshaft Sprocket Locking Tool
Includes 2 blocks swivel lock plate and locking pin for setting
Applications:
camshaft timing.
Engine camshaft sprocket locking device updated timing belt replacement
Application: BMW engine models M60, M62
procedures for the engines detailed below, require examination of the crankshaft
BMW (M62) VANOS Camshaft Timing Tool
to determine acceptance of the new crank gear with integral woodruff key and
For fixing camshaft sensor wheel in position during.
release of the camshaft sprocket bolts requiring use of locking device.
Applicable: M62 VAN
Renault 1.8 16V. F4P
BMW (M62) Electromagnetic Valve Socket
770, 722, 770, 771, 772, 773, 774, 775.
BMW (M62) VANOS Tensioning Bracket
Renault 2.0 16V. F4R
For screwing in chain tension with top right timing case cover
Applications:
700, 701, 712, 713, 714, 715, 720, 730, 732, 736, 738, 740, 741, 744, 746, 747,
removed.
Vauxhall/Opel Astra-G, Astra-H MERIVA(VXR) ZAFIRA-B 1.6
760, 761, 762, 763, 764, 765, 766, 767, 770, 771, 774, 776, 784, 786, 787, 790,
Applicable: Engine M62 VANOS
16V.
792, 794, 795, 797, 830.
www.handyforce.com
TG-194
TG-195
www.handyforce.com
TIMING SERVICE TOOL
TG0270 Cam Belt Tension Gauge
TG0271
Applications:
TG0269
TG0281 Setting Tool Kit For Fiat 8V
Engine Camshaft Pulley Holding
Tool
Applications:
It can be used to adjust the tension on the cam belt where the
Adjustable from 40mm to 220mm plus four set of pins ranging
movement of timing belt is measured by load (NM).
from 6mm to 16mm in diameter.
Suitable for use on various cam belt widths.
Pin Sizes:
Easy to use.
2PCS 5.5x 34.7mm long.
Clear incremental marking with knurled knob for precise
measurement.
Applications:
Dual scale allows reading from top or bottom of tool.
For Alfa Romeo, Fiat, LANCIA.
Alfa Romeo vehicle with 1.4, 1.6, 1.8, 2.0, 3.0L 4 and 6 cylinder
engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA,
GTV, Spider GT and Fiat / Lancia vehicle with 1.2, 1.4, 1.6, 1.8,
2.0L 4 and 5 cylinder engine, Fiat Panda, Punto, Palio, Siena,
2PCS 7.5x 34.3mm long.
2PCS 9.7 x 35mm long.
Applications:
2PCS 15.8 x 35.10mm long.
Kit consists of crankshaft locking tool, camshaft setting plate
and belt tensioner adjuster for the 1.2 engines, and additional
Belt Tool Kit For Elastic Ribbed
TG0280
Belts
sprocket locking tool and alignment fixture for the camshaft on
the 1.4 VVT engine.
Models:
Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Coupe, Lancia
Dedra, Delta, Kappa, Lydra.
New 500(07-08), Idea(04-08), Linda(07-08), Grande
TG0278 Tensioning Tool
Engines: 1.2 8V-169A4000, 199A4.000, 1.2 8V-188A4000-
Punto(07-08), Doblo(05-08), Panda EV02(05-08).
EV02 Only 1.4 16V-350A1.000.
TG0289 Timing Belt Tool Set for VW TDI
For Fiat and Peugeot.
Applications:
For Mercedes Benz, Chrysler, Jeep.
Tensioning tool for clockwise and anti-clockwise tensioners.
Applications:
A timing tool set which covers a large of models in the
Mercedes range including petrol and diesel engines.
Also suitable for Chrysler PT Cruiser 2.2 CRD and Jeep Grand
Cherokee 2.7CRD.
For use on DUCATO 2.8D 1997-2002 & 2.8 JTD 2000-2004
with engine codes 8140.63 and 8140.43.
TG0279
Timing Injection Pump Holder
Tools
pin set.
TG0276 Tensioning Tool
Applications:
Injection pump locking tool for Renault CLIO, MEGANE,
Applications:
LAGUNA, KANGOO 1.9 DTI engines.
For Fiat Bravo/Brava 1.4 12V (1995-onwards).
Engine codes F9Q 717, 731, 780.
www.handyforce.com
TG-196
Applications:
Suitable for engines with elastic ribbed belts such as Alfa
Romeo, BMW, Chrysler, Fiat, Ford, Mercedes, PSA, Seat,
Skoda, Smart, Volvo, VW-Audi, etc.
The tool set is the quick and easy removal and installation of
the new elastic ribbed belts required.
Without this tool, the proper removal and installation is almost
impossible because the leadership does not have a belt
tensioning device and thus has a discharge of the belt is not
possible.
Benefits:
Universally applicable.
No damage to the belt during installation.
No stretching of the belt during installation.
High saving.
Ease of use.
Avoid accidents.
All individual parts available as spare parts.
Applications:
Used for locking the camshaft, crankshaft and diesel pump
while setting the timing belt.
Applicable to 1999-2008 VW TDI and pumped use engines.
Includes new-style cam lock bar.
Both 2 pin spanner wrenches included.
Also includes both styles of crankshaft stops.
TG-197
www.handyforce.com
TIMING SERVICE TOOL
TG0282 Value Spring Compressor
TG0283
13PCS Petrol Engine Timing SetRover KV6
TG0284 Engine Timing Tools for Ford
Applications:
Is use to free the camshaft from tension created by contact with the valves
and enables correct tension to be applied to the timing belt.
Valve spring compressor for Citroen/Peugeot 1.1/1.4 engines from 19931994.
Citroen Models
Engine size
Year
Engine code
AX, AX GTI, ZX, BX
, C15
1.0/1.1/1.4/1.6
94-02
CDY, CDZ, C1A, HDY, HDZ, H1A, KDX,
KDY, KDZ, KFY, KFZ, K1A, KIF, K1G,
K2A, K2B, K2D, K3A, K6B, M4A
Peugeot Models
Engine Size
Year
Engine code
106, 205, 306, 405
1.0/1.1/1.4/1.6
93-
TU1/3/5/9
Applications:
206
1.1/1.4/1.6
98-02
TU1/3/5(HFY HFZ KFX NFZ)
(1999-2005) Rover 45, 75, 160, 180, 190, 825, MG ZS MG ZT,
TG0290
Alfa Romeo and Fiat Timing Tool
Set
For use when replacing engine timing belts: 2.0 V6 and 2.5 V6
ZT-T, Land Rover , Freelander 2.5.
Applications:
Suitable for FORD 1.25L, 1.4L, 1.6L, 1.8L, 2.0L, 2.4L, C-Max,
Cougar, Couier, Duratec-SCI, Fieata, Focus, Fscore, Fusion,
Kombi, Mondeo, Puma, Sierra, Tourneo, Transit petrol and
Not suitable for MG ZT / ZT-T 190 models.
diesel engines.
TG0286 BMW Mini Cooper Timing Tool Set
TG0297
Applications:
Applications:
Maintenance timing chain and engine repair of all tools, can be
locked and positioning crankshaft, camshaft and adjust the belt
tension.
It can lock or locate multiple different camshafts.
Suitable for Alfa Romeo twin spark petrol engines 1.4, 1.6,
1.8, 2.0 and 2.0 JTS (engine code 335.03, 321.02, 321.03,
Engine timing tool kit for BMW Mini One 2001-06(W10B16AA),
Mini Cooper 2001-06 (W10B16BA) and Mini Cooper S 2002-
Petrol Setting and Locking Tool
Kit Fiat 8V
Applicable for BMW Mini Cooper (N14).
TG0288
06 (W11B16AA).
Water Pump Remover and
Installer
Applications:
Diesel Engine Setting/Locking
TG0294
Tool Set
Kit consists of crankshaft locking tool, camshaft setting plate
and belt tensioner adjuster for the 1.2engine, additional
321.04, 372.03[105PS], 676.01, 322.01, 322.05, 671.06,
sprocket locking tool and
162.01, 323.01, 323.10, 341.03, 363.01, 672.04, 932A2.000,
alignment fixture for the camshaft on the 1.4 WT engine.
937A1.000).
Models:
Alfa Romeo 145, 146, 147,155, 156, 166, Spider, GTV, GT
New 500 (07-08), Idea (04-08), Linea (07-08), Grande Punto
and Fiat 1.8 16v twin cam petrol engines 2.0 20V, 2.4 20V
Applications:
(07-08), Doblo (05-08), Panda EV02 (05-08).
(engine code 182A2.000, 183A1.000, 183A6.000, 188A6.000,
Applications:
The tool of the removal and installation for maintenance and
Engines codes:
192A4.000, 175A3.000, 182.A1.000, 183B3.000, 182B7.000,
VAG GROUP 2.5TDi common rail diesel engines (Belt) in
replacement.
1.2 8V 169A4.000. 199A4.000.
192A2.000) Punto, Brava, Bravo, Marea, Weekend, Barchetta,
Volkswagen
Applicable for Ford 1.25, 1.4, 1.6L16V, Puma 1.4, 1.6, 1.7L
1.2 8V 169A4.000 EV02 Only.
Coupe, Stilo.
LT crafter BJJ, BJK, BJL and BJM engines.
16V, Mazda 121 1.25L 16V.
1.4 16V 350A1.000.
www.handyforce.com
TG-198
TG-199
www.handyforce.com
TIMING SERVICE TOOL
TG0291
Engine Timing Tool Set-Citroen &
Peugeot
CITROEN:
C1(05-09), C2(03-09), C3/Pluriel(02-09), C4(04-09), C4/
Picasso(06-09), C5 I/II/III (04-09), C6(06-09), C8(0207), Xantia(98-01), Xsaa(99-06), Xsara Picasso(99-09),
Evasion/Synergie (99-02), Berlingo (99-09), Dispatch/
Jumpy(99-09), Relay/Jumper I/II(01-06), Xsara(98-04), C15
(01-06), Dispatch/Jumpy(99-07), Berlingo(98-07), Saxo(9603), ZX(91-98), Xsara(97-00), Xantia(93-01), XM(90-01),
Evasion/Synergie (95-00), C15(93-02), Berlingo(96-99),
Dispatch/jumpy(95-01), Relay/Jumper (94-02), C2(03-09),
C3/Pluriel(04-09), C4(04-09), Saxo(00-03), Xsara(00-04),
Berlingo(01-09), Xsara(00-05), Xsara Picasso(99-07), C4 (0409), C4 Picasso(06-09), C5/ II/III(00-09),C8(02-09), Evasion/
Synergie(00-02), Dispatch/Jumpy(00-09), C2(03-09), C3/
Pluriel(02-09), C4(04-08), AX(91-97), Saxo(96-03), ZX(91-98),
Xsara(97-006), Xsara PiCASSO(99-06), Xantia(93-01),
XM(93-00), Evasion/Synergie(94-01), C15(92-98),
Berlingo(97-09), Relay/Jumper(94-06).
PEUGEOT:
107(05-09), 1007(05-09), 206/CC(99-09), 207(0609), 306(99-02), 307/CC(01-09), 308(07-09), 406(9804), 406 Coupe(00-06), 407(04-09), 607(00-09), 806(9902), 807(02-07), Partner(99-08), Expert I/II(99-07), Boxer
I/II(02-06), 206(98-04), 306(98-02), Partner(98-07),
Expert(99-07),106(94-03), 306(93-00), 406(95-00), 605(9300), 806(95-00), Partner 1/II(96-00), Expert(95-00),
Boxer(94-02),106(00-03), 1007(05-09), 206/CC (0009), 207(06-09), 306(00-02), 307(01-08), Partner(00-09),
206/CC(98-07), 307/CC(01-09), 406/Coupe(99-06), 407/
Coupe(04-09), 607(00-09), 806(00-02), 807(02-09), Expert
I/II/III(00-09), 106(93-03), 1007(05-09), 205(89-96), 206/
CC(98-09), 207(06-08), 306(93-03), 307/CC(01-09),
405(92-97), 406(95-02), 406 Coupe(97-02), 605(93-00),
806(94-01),Partner I/II(96-07), Boxer I/II (94-06).
TG0293 Diesel Engine Setting Tool Set
TG0302
Engine Timing Tool Set For BMW
Applicable:
Model
M52TU, M54, M56(3series E46, 5series E39/E60/E61,
7series E38/E65/E66, X3 E83, X5 E53, Z3, Z4 E85)
For Land Rover, BMW, Opel.
M52TU, M54, M56
Applications:
Applications:
BMW N47 / N47S 2.0d diesel engine in:
Models:
M50, M52 (3series E36/E46, 5series E34/39, 7series E38, Z3)
1Series: 118d(E81/E87).
318TDS E36 (94-00), 325TD/TDS E36(91-99), 725TDS
M50, M52, M52TU, M54, M56
120d(E81/E82/E87).
E38(95-02).
123d(E81/E82/E87).
Engines:
3Series: 318d (E90/E91).
M41/M45
320d(E90/E91/E92).
Also for Range Rover 2.5DT/SE and VAUXHALL/OPEL
5Series: 520d(E60/E61).
Omega-B.
M52, M52TU, M54, M56
M50 (3series E36, 5series E34)
X3 2.0d: (E83).
TG0298 BMW Timing Tool
M50, M52, M52TU, M54, M56
Camshaft Setting and Locking
TG0300
Tool Kit
For BMW M47/M57(M47, M47TU, M47T2, M57, M57TU,
Special design to locate camshaft in TDC position.
M57T2).
Applications:
Applicable: BMW N51/N52/N53/N54 engines.
1series: E87 118d, 120d (03-07).
BMW Mini, Citroen and Peugeot 1.4 and 1.6 16V valvetronic/
Models:
3series: E46 318d/td (00-05), 320 d/cd (97-06), 330 d/cd/
direct Injection petrol engines.
128i E82 (07-08), 130i E81/E87 (05-08), 135iS E82 (07-08),
xd(98-06), E90/91/92/93 318 d/td (04-07), 320 d/cd(04-07),
BMW Mini:
323i E90/91/92/93 (04-08), 325i/xi E90/91/92/93 (04-08), 330i/
325 d(06-08),
R55 R56 Cooper S, R55 R56 Cooper, R56 Mini One.
xi E90/91/92/93 (04-08), 335i/xi E90/91/92/93 (04-08), 523i/Li
330 d/cd/xd (04-08) / 335d (06-08).
Citroen and Peugeot:
Applications:
E60/61(04-08), X3
5series: E39 520 d (99-04), 525d/xd (99-04), 530 d/xd (98-04)
C4, C4 Picasso 207, 308.
Required when installing and removing of flywheels, clutch
2.5/3.0 E83 (06-08), 525i/Li/xi E60/61(06-08), 630i E60/61 (04-
E60/61 520 d (05-08), 525 d/xd (02-08), 530 d/xd(02-08),
Engine:
plates and pulleys.
08), 528i/Li/xi E60/61 (06-08), 530i/Li/xi E60/61 (05-08), 535i/
535 d (04-08).
BMW: N12 (1.4/1.6) and N14 (1.6).
Length: 250mm(L).
xi E63/64 (04-08), 730i/Li E65/66 (04-08), X5 3.0 E70 (06-08),
6series: E63/64 635 d (06-08).
PSA: EP3, EP6 and EP6 DT/DTS.
Z4 2.5/3.0 E85/86 (05-08), E90/91/92/93 (04-08), 328i/xi.
TG0292 Universal Holder for Flywheels
www.handyforce.com
TG-200
TG-201
www.handyforce.com
TIMING SERVICE TOOL
TG0301 Timing Tools for Ford
TG0303 Engine Timing Tool Set for Opel
TG0307
VAG Petrol and Diesel Engine
Timing Kit
Applications:
Fiesta/Courier (00-00), Focus (98-00), Focus (04-08), Focus C-Max (03-08),
Mondeo (07-08), Tourneo Connect (02-08), Transit Connect (02-08), Fusion
(02-08), S-Max (06-08), Galaxy (06-08).
1.4 TDCI
1.6 TDCI
2.0 TDCI
F6JA , F6JB, F6JC
HHJA, HHJB, G8DA
G6DA, AZWA, G6DB
G8DA, HHDA, HHDB
QXWA, G6DC
1.8 D Turbo
1.8 TDDI
1.8 TDCI
RTN, RTQ
BHDA/B, BHPA
F9DA/B, FFBA, FFDA
RTP, C9DC
C9DA/B, C9DC
HCPA, HCPB, KKDA
HXDA
P7PA, P9PA, QYWA
Applications:
Models: Astra Vectra VX220 Zafira & Signum(00-04).
Explanation: retains position of coolant pump sprocket during
replacement of pump, maintaining engine timing.
Codes:K9K, G9T, G9U.
Applications:
Covers most of the VAG group's petrol and diesel engines.
AUDI: 80, 100, A2, A3, A4, A6 and TT.
SEAT: Terra, Ibiza, Cordoba, Leon, Toledo, Inca and Alhambra.
SKODA: Fabria, Felicia and Octavia.
VW: Lupo, Polo/Classic, Caddy, Golf, Jetta, Vento, Bora, New
Beetle, Passat, Sharan, Transporter and LT.
TG0310
Engine Timing Tool Set for VAG
2.4 and 2.5TDi
TG0304 Engine Timing Tool Set For Audi
R2PA, R3PA, RWPA
TG0296
Engine Timing Tool Kit For Toyota
and Mitsubishi
TG0295
Engine Timing Tool Kit For Honda
and Mazda
Applications:
Camshaft adjuster pre-tensioning.
Camshaft locking.
Removal and installation of timing chain.
Align camshafts.
AUDI
Applications:
crankshaft pulley tools for use on a wide range of TOYOTA or
For Honda, Mazda, Subaru, Hyundai, Daewoo, Chevrolet.
MITSUBISHI vehicles.
www.handyforce.com
TG-202
Model
Engine Code Year
A6 2.4
BDW
2004-07
A6 2.4 Quattro
BDW
2004-07
A4 3.2 FSI
AUK
2004-07
A6 3.2 FSI
AUK, BKH
2004-07
A8 3.2 FSI
2005-07
Applications:
Set of engine timing locking tools for use on Volkswagen 2.4D
with engine codes AAB, AJA(02/95-03)
VW GROUP 2.5TDi common rail diesel engines (Belt) in
Volkswagen LT Crafter BJJ, BJK, BJL and BJM engines.
The correct alignment is achieved by placing equal thickness
of shims between both ends of the bracket and the cylinder
head.
Camshaft Setting Strap is used to set the correct timing
position of the camshaft.
The center part of the bracket fits into the slotted end of the
camshaft and the ends of the bracket locate on the cylinder
head.
Injection Pump Pulley Setting Spigot is 15.4mm in diameter
and is used on engines with a one piece Injection Pump
Sprocket.
The crankshaft damper holding tool (A) prevents the damper
from rotating whilst unfastening and refastening the center bolt.
This tool should be used with 3/4”D power bar.
TG-203
www.handyforce.com
TIMING SERVICE TOOL
TG0308 Timing Tools Set
Applications:
For Citroen-Peugeot DW 8 –DW 10 – DW 12 (HDI) engines.
This comprehensive tool kit is used for correct engine timing
when replacing the timing belt.
TG0311
Engine Timing Tool Kit For
HONDA
For Citroen/ Peugeot/ Renault/ Fiat/ Iveco, 2.5, 2.8D DT/TDI/
HDI.
Citroen: jumper 2.8 D/TDi/HDi (01-06), Relay 2.8D/TDi/HDi
(01-06).
Fiat: Ducato 2.5, 2.8 D/DT/JTD (87-06), Talento 2.5, 2.8 D/DT/
JTD(87-02)
Iveco: Dally 2.5, 2.8(91-05), Turbo Daily 2.5, 2.8(94-00).
Peugeot: Boxer 2.8 D/TDI/HDi (00-06).
Renault: Mascot 2.5,2.8 D Turbo/DTi/DCi (99-07), Master
2.5,2.8 D Turbo/DTi/DCi (80-70), Trafic 2.5, 2.8 D Turbo/DTi/
DCi (80-00).
Engine codes:
Citroen/Peugeot: 8140.63/43/43S,
Fiat: 814467,8140.27/47R , 8144.21, 8140.43/63/43S,
Iveco: 8140.07/27S/47/47R/67F/97/23/43C/43S.
Renault: S8U, S9U, S9W.
TG0314 Twin Camshaft Setting/Locking
Tool Kit
Applications:
on Renault K4J, K4M 1.4, 1.6 16V & F4P, F4R 1.8, 2.0 16V engines when
changing the timing belt.
CLIO 1.4,1.6 16V (98-06)
MAGANE 1.4,1.6 16V (98-06)
CLIO SPORT 2.0 16V (98-06)
MEGANE 1.8,2.0 16V (98-04)
ESPACE 2.0 16V (98-04)
MEGANE II 1.4 16V (02-09)
GRAND SCENIC II 1.4/1.6 16V (02-09)
MEGANE II 1.6 16V (02-05)
LAGUNA 1.6 16V (98-06)
MEGANE II 2.0 16V (02-09)
LAGUNA 1.8 16V (01-05)
SCENIC 1.4,1.6 16V (98-06)
LAGUNA 1.8, 2.0 16V (98-04)
SCENIC 1.8, 2.0 16V (98-04)
LAGUNA II 2.0 16V T (02-09)
SCENIC II 1.4,1.6,2.0 16V (02-09)
Applications:
Tool holder Honda No.: JAB-0010100.
Extension handle Honda No.: 07-JAB-001020B.
Pulley holder tool 6 PT Honda no.: 07-MAB-PY-30100.
TG0313 Opel Twin Cam Timing Tool
(Chain)
Applications:
on Renault K4J, K4M 1.4, 1.6 16V & F4P, F4R 1.8, 2.0 16V engines when
changing the timing belt.
Applications:
CLIO 1.4,1.6 16V (98-06)
MAGANE 1.4,1.6 16V (98-08)
CLIO SPORT 2.0 16V (98-06)
MEGANE 1.8,2.0 16V (98-04)
covers K9K 1.5DCI diesel engines.
ESPACE 2.0 16V (98-04)
MEGANE II 1.4 16V (02-09)
Applications:
GRAND SCENIC II 1.4/1.6 16V (02-09)
MEGANE II 1.6 16V (02-05)
RENAULT 1.4, 1.6, 1.8, 2.0 16V twin camshaft petrol engines
LAGUNA 1.6 16V (98-07)
MEGANE II 2.0 16V (02-09)
LAGUNA 1.8 16V (01-05)
SCENIC 1.4,1.6 16V (98-08)
LAGUNA 1.8/2.0 16V (98-04)
SCENIC 1.8, 2.0 16V (98-04)
LAGUNA II 2.0 16V T (02-09)
SCENIC II 1.4,1.6,2.0 16V (02-09)
The full kit incorporating the timing tools required for all K4J/
K4M/F4P/F4R 1.4, 1.6, 1.8, 2.0(T)16v petrol engines, and also
pplications:
Models: CORSA, AGOLA, ASTRA, MERIVA (97-04).
Engines: 1.0 12V, 1.2 16V, 1.4 16V (chain).
Engine codes: X10XE, ZI0XE, Z10XEP, X12XE, Z12XE,
Z14XEP.
www.handyforce.com
in:
Clio, Modus, Megane, Scenic, Laguna, Kangoo, K4J/K4M 1.4
and 1.6 16V engines, Clio, Megane, Scenic, Laguna, Espace
Trafic F4P/F4R (T)1.8 and 2.0 16V engines.
TG-204
TG-205
www.handyforce.com
TIMING SERVICE TOOL
TG0316 Setting/Locking Kit – Alfa Romeo
TG0320 Timing Tool Kit-Renault
For Alfa Romeo 1.9 8 and 16V, 2.4 10/20V JTD.
Applications:
Alfa Romeo 145(98-01), 146(98-01), 146(98-01), 147(01-
Applications:
08), 156(97-08), 159(05-08), 166(98-08), GT(04-08),
Clio 1.2/1.4
Megane 2.5D/TD
Brera(05-08), Fiat; Brava(98-02), Bravo(07-09), Croma (05-
Clio 1.4/1.6/1.8 16V
Megane 1.4/1.6/2.0/ 16V
07), Marea(99-03), Marea Weekend(99-03), Multipla (99-04),
Clio Sport2.0 16V
R19 1.4
Stilo(01-06), Lancia kappa(98-02), Lybra(99-07), Musa(04-08),
Clio Williams 2.0 16V
R19 1.4 Eco
Alfa Romeo:
Espace 2.0
R19 1.8 16v
1.9-323.02, 371.01, 182B9.000, 937A2.000,939A1.000,
Espace 2.0 16V
Rapid 1.4
Espace 2.2 TD
Safrane 2.0 16V
342.02,362.02, 839A6.000,841C.000, 841G.000,
Express 1.4
Safrane 2.2 TD
841H.000841M.000, 939A3.000,
Extra 1.4
Safrane 2.5 20V
192A1.000, 192A3.000, 192A9.000, 199A5.000, 939A1.000,
Kangoo 1.2/1.4
Scenic 1.4/1.6/2.0 16V
939A5.000, 939A7.000, 223A7.000, 192A5.000, 939A2.000,
Laguna 1.6 16V
Trafic 2.5D
Lancia:
Laguna 1.8/2.0
Twingo 1.2
323.02, 371.01,188B2.000, 937A2.000, 838A8.000,839A5.000,
Laguna 1.8/2.0 16V
Laguna 2.2 D/TD
08), Doblo/Cargo(02-08), Grande Punto (05-08), ldea(04-
Thesis(02-08).
939A2.000, 939A7.000, 192A5.000, 192B1.000,937A4.000,
937A5.000, 939A2.000, 939A8.000, 2.4-325.01,
Fiat:
939A8.000, 185A6.000, 939A3.000
839A6.000, 841C.000.
Laguna 2.5 D/TD
For Opel Renault Nissan 1.5/1.9/2.2/2.5 DCI(VANS).
TG0323 Twin Camshaft Setting/Locking
Tool Kit
For Opel Renault Nissan 1.5, 1.9, 2.2, 2.5 DCI(VANS).
Applicable:
Renault: Clic, Megane, Scenic, Lanuna, Espace, Kangoo,
Trafic, Master (99-04).
Nissan: Micra, Kubistar, Primastar, Interstar.
Opel: Vivaro, Movano.
Engine: 1.5, 1.9, 2.2, 2.5DCI (K9K, K9Q, G9T, G9U).
To prevent the engine shafts (camshaft, crankshaft) from
TG0315 Timing Tool Kit-Chrysler
Applications:
Suitable for VW-Audi 1.4L and 1.6L FSI petrol engines (engines
code: AXU, BAG, BKG, BLF, BLN, BLP) Audi A3, Skoda,
Ocatvia, VW Polo, Golf, Golf Plus, Touran.
To check and adjust camshaft timing.
Required when replacing timing belts or timing chains or during
engine repairs.
TG0321 Engines Timing Tool Set
Applications:
VW 2.0 TDI with oval pulley.
TG0326 Timing Tensioner and Valve
Timing Tool – VAG
For CHRYSLER/LDV 2.5CRD.
Applications:
Chrysler, Voyager(01-08), Grand voyager(01-08), LDV,
Maxus(05-08).
Engine codes: Chrysler, R2516C, LDV, VM2516L.
TG0322 Engines Timing Tool Set
Applicable:
Renault: Clio, Megane, Scenic, Lanuna, Espace, Kangoo, Trafic, Master (99-04).
Applications:
Nissan: Micra, Kubistar, Primastar, Interstar.
Audi; A3, S3, A4, A6, TT, Seat, Ibiza, Cordoba, Leon, Toledo,
Opel: Vivaro, Movano.
Alhambra, Skoda, Octavia, VW Beetle, Bora, Golf, Passat.
Engine: 1.5, 1.9, 2.2, 2.5DCI (K9K, K9Q, G9T, G9U).
Engine codes:
To prevent the engine shafts (camshaft, crankshaft) from turning belt tensioner
ADR, AEB, AFY, AGN, AGU, AJH, AJL, AJP, AJQ, AMK, AMU,
when changing a timing belt or during other engine repairs.
Injection pump locking tool for Renault Clio, Megane, Laguna, Kangoo 1.9 DTi
engine codes F9Q 717/731/780.
www.handyforce.com
TG-206
ANB, APG, APH, APP, APT, APU, APX, APY, AQA, AQX, AGR,
Applications:
VW 1.2, 1.4, 1.9 and 2.0 TDI with “round” crankshaft pulley.
ARX, ARY, ARZ, ATC, ATW, AUM, AUQ, AVC, AWC, AWP,
AWU, AWV, AYP, BAM, BEA, BFV, BKF, BNU, BVP, BVR.
TG-207
www.handyforce.com
TIMING SERVICE TOOL
TG0325 Crankshaft Pulley Holding Tool Set
TG0329 Engines Timing Set
TG0327 Setting Locking Kit-VAG
For belt and chain type timing device.
For crankshaft pulleys with internal hexagon pulley removal
required for belt replacement applications.
Jazz 1.2 / 1.4
Legend 3.5
Stream 1.7
Civic 1.4 / 1.6 / 1.7
S2000 2.0
Shuttle / Odyssey 2.2 /2.3
Accord 1.8/2.0/2.3/2.4/3.0/2.2 CDTi
FR-V 1.7
CR-V 2.2 CDTi
Applications:
Timing tool Set for VAG 1.2, 1.4, 1.9 and 2.0 TDI PD
DOHC engines fitted to Audi A4, A6, Skoda, Octavia II and
Volkswagen Golf, Golf Plus, Jetta and Touran models.
TG0330 Benz Timing Locking Tool Set
FR-V2.2 CDTi
TG0328 Setting/Locking Kit VAG
Applications:
Diesel: 1.7, 1.9 D/DT/SDi/TDi, Audi 80(91-96), A3(9603), A4(95-01), A6(94-02), Seat Alhambra(96-00),
Arosa(98-05), Cordoba(93-06), Ibiza(93-06), Inca(9404), Leon(99-05), Toledo(94-05), Skoda Fabia(99-06),
Felicia(95-01), Octavia(96-06), VW Beetle(98-02), Bora(9405), Caddy(96-04), Golf(94-05), Lupo(98-05), Passat(96-00),
Polo(95-06), Sharan(95-00), Transporter(90-03).
Petrol: 1.6, 1.8, 1.8T, 2.0, 2.0 16V, 2.0 FSI Audi 80(9196), A3(96-08), S3(99-03), A4(95-08), Cabriolet(91-00),
Suitable for Opel Renault/ Nissan 1.5/1.9/2.2/2.5 DCI(VANS).
A6(94-08), TT(98-05), Seat Alhambra(96-08), Altea(04-08),
Cordoba(93-02), Ibiza(93-02), Inca(95-04), Leon(99-
TG0317
MW Single Vanos Valve Timing Kit
For 1.2, 1.4, 1.9 TDi PD.
Applications:
Applications:
Suitable for a wide range of Benz, including petrol and diesel
engines.
pin set.
AKS, ALZ, ANA, APF, ARM, AUR, AVU, AYD, BFQ, BFS,
BGU, BSE, BSF, 1.8-ABS, ADR, ADZ, AGN, AJP, APG, APT,
Golf (98-08), Golf Plus(05-08), Jetta(05-08), Lupo(99-05),
APX, ARG, 1.8TAEB, AGU, AJH, AJL, AJQ, AMK, ANB, APP,
Passat(98-08)
APU, APY, AQA, AQX ,ARX, ARY, ARZ, AUM, AVC, AWC,
, P o l o ( 9 9 - 0 8 ) , S h a r a n ( 9 9 - 0 8 ) , To u r a n ( 0 3 - 0 8 ) ,
AXR, BEW, BJB, BKC, BKE, BLS, BLT, BPX, BRB, BRM,
BRU, BSV, BSW, BTB, BVK, BXE, 2.0 TDi PD-AZV, BKD,
BDJ, BDK, BGW, BHW, BKP, BLB, BMA, BMM, BMP, BMR,
BNA, BPW, BRC, BRE, BRF, BRT, BSS, BUY, BUZ, BVE, BVF,
BVG, BVH, BWV.
www.handyforce.com
Engine codes:
Petrol: 6-1F, ABM, ADA, ADP, AEH, AEK, AFT, AHL, AKL,
Beetle(00-08), Bora(98-08), Caddy(03-08), Fox(05-08),
ARX, ASZ, ATD, ATJ, AUY, AVB, AVF, AVQ, AWX, AXB, AXC,
Transporter(90-08).
ASV, AVG.
Octavia(00-08), Roomster(07-08), Superb(02-08), VW
BAY, BHC, BNM, BNV, 1.9TDi PD-AJM, AMG, ANU, ARL,
Sharan(95-08), Touran(03-08),
TDi-1Z, AAZ, AFF, AFN, AGR, AHF, AHH, AHU, ALE, ALH,
Ibiza(02-08), Leon(00-08), Toledo(04-08), Skoda Fabia(00-07),
Engine codes: 1.2 TDi PD-ANY, AYZ, 1.4TDi PD-AMF, ATL,
Caddy(95-06), Golf(94-08), Passat(04-08), Polo(95-02),
AEF, 1.9 SDi-EAF,AEY, AGD, AGP ,AQM, ASX, ASY, AYQ, 1.9
Alhambra(99-08), Altea(04-08), Arosa(99-06), Cordoba(02-08),
Transporter(03-08).
Superb(02-08), VW; Beetle(99-08), Bora(94-08),
Diesel: 1.7 SDi-AHB, AHG, AKU, AKW, 1.9 D-1Y, AAZ, ABL,
TG0331 Crankshaft Rotating Tool-BMW
Audi A2(01-06), A3(01-08), A4(99-08), A6(98-08),Seat
05), Toledo(94-08), Skoda Fabia(00-07), Octavia(96-07),
AWT, AWU, AUQ, AYP, BAM, 1.8 16V-ADL, 2.0-2E, AAC,
Applications:
Camshaft locking fixture 4 and 6 cylinders.
Applicable: M42, M44, M50, M52, M52TU, M56, S50US and
S52US.
Top dead center pin applicable engines:
M42, M43, M44, M50, M52, M52TU, M54, M60, M62, M70,
M73, S50B30, S50B32, S54, S62.
Vanos turning wrench applicable engines: M50, M52.
Chain tensioner lock pin applicable engines: M50, M52.
TG-208
Applicable:
BMW 325, 330, 335, 525, 530, 535, 730.
2.5D engine code:
M57N256D2
3.0D engine code:
M57306D3, M57306D4, M57306D5, M57D30A, M57N206D3,
M57N2306D3,
M57N306D2, M57N306D3, M57N306D5, N57N306D2,
N57N306D3.
AAE, ABF, ABK, ABT, ACE, ADY, AEG, AGG, AKT, APK,
AQY, ATM, AWF, AWG, AXA, AZH, AZJ, AZL, AZM, BEH, 2.0
16V-ABF, 2.0 FSi/TFSi-AXW, AXX, BGB, BHD.
TG-209
www.handyforce.com
TIMING SERVICE TOOL
TG0332 Engine Timing Tool Set – VAG
TG0333 Mitsubishi Hyundai Plymouth Pulley
Spanner
Applications:
This tool allows for the easy adjustment or release of tension
of the camshaft spur belts having idler pulleys with pin holes.
In operation, this spanner wrench grips the center of the idler
pulley and rotates it around its off-center retaining bolt.
This rotation then allows for camshaft spur belt tension
adjustment.
Made from heat treated alloy steel and a soft grip handle.
Applicable:
Audi:
A3 1.6(2009)
Engine code: CAYB/CAYC
A3/A4/A6/Q5 2.0(2007)
Engine code: CBAB/CBBB/CBAA/CFFB/CAGA/CAHA/CAGB/
CAHB/CAGC
SEAT:
EXEO 2.0(2009)
Engine code: CAGA/CAHA/CAGA
Volkswagen:
GOLF /GOLF PLUS 1.6(2009)
Engine code: CAYB/CAYC
Tiguan/Passat/EOS/Golf/Golf Plus 2.0(2008)
Engine code: FCA/CAAA/CAAB/CAAC/CCHA/CAVA/CBAB/
CBDA/CBDD/CBBB/CBAA/
CBAC/CBDA/CBDC
TG0336 Crankshaft Pulley Holding Tool 45mm
TG0339 Petrol Engine V8 Setting /Locking Tool Kit
Applications:
Jaguar/Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 petrol engines.
For Jaguar models:
Model
XJ8(97-09)
XJR(97-09)
S-Type(99-08)
XF(08-09)
XK8(97-09)
Engine
AJ26 Series
AJ27 Series
AJ28 Series
AJ34 Series
XKR(98-09)
3.2
AC
KB
KC
3.5
RB
BC
CC
CE
DC
EC
GB
GC
4.0
4.2
LC
MA
MB
NB
NC
PA
PB
1B
2B
3B
1G
5G
9G
HB
HG
SB
TB
PC
For Land Rover models:
Applications:
Removes and installs the crank bolt on most Honda and Acura
engines.
Tool holds the harmonic damper pulley from rotating when
removing the pulley bolt.
Hole in center of tool allows use of socket to loosen or tighten
the pulley bolt.
Use with a 1/2” breaker bar or ratchet.
Model
New Rang Rover(06-09)
Range Rover Sport(05-09)
Engine
4.2
428PS
4.4
448PN
TG0341 Petrol Engine V8 Setting /Locking Tool Kit
TG0340 Crankshaft Pulley Remover/Installer
Tool Kit
Applications:
Jaguar/Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 petrol engines.
For Jaguar models:
Model
XJ8(97-09)
XJR(97-09)
S-Type(99-08)
XF(08-09)
XK8(97-09)
XKR(98-09)
For Land Rover / Volvo 2.0, 2.2 diesel.
Models
Engines
Freelander 2 (06-09)
TD4/DW12BTED4
For Volvo models:
Models
Engines
C30 (06-09)
C30 (06-09)
C30 (06-09)
C30 (06-09)
www.handyforce.com
D4204T
D4204T2
Engine
AJ26 Series
AJ27 Series
AJ28 Series
AJ34 Series
3.2
AC
KB
KC
3.5
RB
BC
CC
CE
DC
EC
GB
GC
4.0
LC
MA
MB
NB
NC
PA
PB
1B
2B
3B
1G
4.2
5G
9G
HB
HG
SB
TB
PC
For Jaguar / Land Rover.
Applications:
Crankshaft pulley must be removed for engine overhaul
applications / removal of front timing chain cover.
TG-210
Model
New Rang Rover(06-09)
Range Rover Sport(05-09)
Discovery 3 (05-09)
Engine
4.2
428PS
TG-211
4.4
448PN
www.handyforce.com
TIMING SERVICE TOOL
TG0349 Diesel/Petrol Crankshaft
Holding Tool
TG0338 Diesel Engine Setting/Locking
Tool Kit
For Renault/Volvo.
Applications:
Volvo 1.6, 1.8, 1.9, 2.0, 2.3, 2.4, 2.5 twin cams(Belt) petrol engines.
For Volvo models:
For Volvo belt drive.
Applications:
Used to counter-hold the crankshaft pulley to release and
tighten the center bolt.
Suitable for a wide range of Volvo models and engine sizes.
TG0350 Diesel & Petrol Engine Setting/
Locking Tool Kit
Model:
For diesel engine setting/locking & HP pump removal/
installation on VAG 2.7/3.0 TDi V6 and 4.0/4.2 TDi V8 chain
drive diesel engines fitted to:
AUDI: A4, A5, A6, A6 Allroad, A8, Q5, Q7.
VOLKSWAGEN: Phaeton, Touareg.
V6 engine codes:
ASB, BKN, BKS, BMK, BMZ, BNG, BPP, BSG, BUG, BUN,
CAMA, CAMB, CANA, CANB, CANC, CAND, CAPA, CARA,
CARB, CASA, CASB, CASC, CATA, CCMA, CCWA, CCWB,
CDYA, CDYB, CDYC, CEXA, CGKA and CGKB.
V8 engine codes:
ASE, BTR, BVN, CCFA.
Applications:
Citroen/Peugeot diesel & petrol engines and these engines
fitted in Fiat, FSO, Tata, LDV and Rover.
Codes: VS1283, VS1286, VS1287, VS169
850(92-97)
C70(98-02)
S40(96-04)
V40(96-04)
S60(01-05)
S70(97-00)
S80(99-05)
Engines:
B5204FT
B5234T3
B5234T4
B5234T5
B5234T6
B5234T7
B5234T8
B5234T9
B5244S
B5244S2
B5244SG
B4204T
B4204T2
B4204T3
B4204T5
B5202FS
B5204FT
B5204T2
B5204T3
B5204T4
B5204T5
B5234FS
B4164S
B4164S2
B4184S
B4184S2
B4184S3
B4184S9
B4184S10
B4194T
B4194T2
B4204S
B4204S2
B5244SG2
B5244T
B5244T3
B5244T4
B5244T5
B5244T7
B5252FS
B5254T
B5254T2
B5254T4
Renault:2.0 16V / 2.5 20V N7Q / N7U(Belt) petrol engines.
For Renault models:
Models:
Laguna ( 96-99 )
Safrane ( 96-01 )
Engines:
2.5 20V
N7U 700/701
2.0 16V
N7Q 704/710/711
TG0356 Diesel Engine Setting/Locking Kit TDV6
TG0351 Fiat 1.3JTD Multijet Engines
Timing Tools
Applications;
Land Rover, Jaguar & PSA(Citroen/Peugeot)
2.7/V6(TDV6) quad cam diesel engines in:
Applications:
For straightforward checking and setting of camshaft and
crankshaft timing.
FIAT 1.3JTD MULTIJET 16V diesel engine fitted to:
FIAT Doblo, Doblo Cargo Idea, Panda, Punto
Engine codes:188A8.000 and 188A9.000
www.handyforce.com
For GM/Chevrolet 2.0 SOHC.
Application:
GM Antara, Chevrolet Captiva, Cruze, Epica and Lacetti.
Engine codes: Z20DM, Z20DMH, LLWZ20DMH, RA420,
Z20S1, Z20S3, Z20S4, Z20S5.
TG-212
LAND ROVER
Range Rover sport / Discovery 3
JAGUAR
S – Type / XJ Series
PSA-Citroen/Peugeot
CITROEN C6
PEUGEOT
407 / Coupe / 607
Engine codes:
276DT/DT17TED4 (UHZ) (TDV6) engines.
TG-213
www.handyforce.com
TIMING SERVICE TOOL
TG0335 Engine Timing Tools-VW & Audi
TG0352 Honda Twin & Single Cam Timing Kit
Applications:
Honda petrol engines, including twin camshaft engines in Honda
and Rover models B,D,F and H series engines.
Honda models:
Applications:
MODELS: AUDI A4, A6, A8, A11yoad (97-04)
VW PASSAT (98-04)
Engines codes: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH,
and BFC.
2PCS 4 GROOVES AND ALU FINISH LOCKING TOOLS
New parts:
1- VW 1.2/1.4/1.9/2.0 TDI with “round” crankshaft pulley.
2- W 2.0 TDI with oval pulley.
Engine timing tool set for Audi.
TG0355 Diesel Engine Setting/Locking
Tool
Applications:
Set includes crankshaft and camshaft locking pins for Land
Rover with chain timing engines.
Land Rover 2.5 TD5 diesel engines chain drive, Land Rover
90, 110, 130, Defender and Discovery.
Civic 1.6VTI/VTEC, Integra Type R
Accord 1.8/2.0/2.2, Prelude 2.0
Accord 1.8/2.0/2.2VTEC,
Accord Coupe 2.0/2.2
Accord Aerodeck 2.0/2.2
Accord 2.0 16V, Prelude 2.0 16V.
Accord Coupe 2.0, Prelude 2.0
Accord 2.3l, Prelude 2.3l
Accord Type R, Prelude 2.2VTEC
Shuttle 2.2i/2.3l
Rover models:
216GTi, 416GTi
618,620,623
TG0365 Engine Service Tool Set
For Ford, Fiat, Suzuki, Vauxhall/Opel.
Mark
Ford
FIAT
Suzuki
www.handyforce.com
(-95) D16A8/D16A9 twin cam
(93-99) F18A3/F20Z1/H23A3
TG0361 Setting/Locking Kit Fiat/Lancia
1.6 16V
TG0360 Diesel Engine Camshaft Locking
Tool
For Land Rover, LDV and LTI Carbodies.
Applications:
Land Rover: 2.5D-Defender 90/110(-91), 200TDi-Defender
90/110,
Discovery (98-), Range Rover Classic(93-), 300TDi-Defender
90/110, Discovery, Range Rover Classic(95-)
LDV: Sherpa 285, 310, 350, 2.5D.
LTI Carbodies: Taxi FX45 2.5D.
(90-01) B16A/B18C6 twin cam
(90-96) F18A/F20A/F22A
(93)F18A3/F18B2/F20B3/F20B6
F20Z1/F20Z2/F20Z3/F22B5/F22B6
F22Z2
(87-92) B20A5/B20A7 twin cam
(97-) F20A4,F20B5
(92-96) H23A2/H23A3 twin cam
(93-)H22A2/H22A5/H22A7 twin cam
(95-01) F22B8/F23A7
Applications:
Fiat Brava (95-00), Bravo (95-00), Doblo/Cargo(02-06), Marea
(96-00), Marea Weekend (96-00), Multipla (98-08), Palio
Weekend (96-99), Lybra
(99-06).
Engine codes:
Fiat: 18B3.000, 182A4.000, 182A6.000, 182B6.000.
Lancia: 182A4.000 182A6.000, 182B6.000.
TG-214
Vauxhall
Opel
Model
KA
Punto
Panda
Idea
Doblo
Ingis
Wagon
Swift
Agila
Corsa-C
Combo-C
Corsa-D
Astra-H
Tigre-B
Meriva
Type
1.3 TDCi
1.3 JTD Multi-Jet
1.3 JTD Multi
1.3 JTD Multi
1.3 JTD Multi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
1.3 CDTi
TG-215
Engine Code
Year
188A9.000
169A1.000 | 188A8.000
199A3.000 | 188A9.000
188A9.000
Z13DT
Z13DT
Z13DT
Z13DT
Z13DT
Z13DT
Z13DTH | Z13DTJ
Z13DTH
Z13DT
Z13DT | Z13DTJ
2003-2007
2003-2009
2004-2006
2004-2006
2003-2009
2003-2009
2003-2010
2003-2008
2003-2007
2003-2009
2006-2009
2004-2009
2004-2009
2004-2009
www.handyforce.com
TIMING SERVICE TOOL
TG0357 Diesel Engine Setting/Locking Tool Kit
TG0363 Twin Vanos Service Tool Kit
TG0354 Petrol Engine Twin Camshaft
Setting/Locking Tool Set
For Ford, Mazda, Audi, Seat, Volkswagen and Volvo.
FORD
Fiesta 1.6D, Escort 1.6D, Orion 1.6D
Fiesta 1.8D, Mondeo 1.8TD, Escort 1.8D/TD,(-96),
Sierra 1.8TD, P100 1.8TD ,Galaxy 1.9TD, Transit
2.4D, Transit 2.5Dl /Turbo (84-)
AUDI
A4 1.9TDi, 80 1.9D/Turbo D, 80 1.9TDi, 100 5D,
100D/CD, 100D Turbo, 100 2.5TD/TDi, A6 2.5TDi
MAZDA
121 1.8D(95-)
SEAT
Terra 1.3D/1.4D, lbiza 1.9D/Turbo, Cordoba
1.9D/Turbo, Toledo 1.9D/TD, Alambra 1.9TDi
VOLKSWAGEN
Polo 1.3D/1.4D/1.9SDi(AGD), Polo Classic 1.7
SDi/1.9SDi (AEY), Golf/Jetta/Caddy
1.5D/1.6D/, Turbo, Caddy 1.7SDi/1.9SDi(AEY),
Golf/Vento 1.9TD/TDi (-94), 1.9SDi, Passat/Santana
D/Turbo, Passat TD/TDi, Sharan 1.9TDi,
Transporter 1.6D/1.7D/1.9D/Turbo(-94),
2.4D(-95) LT 2.4D/Turbo D, Transporter 1.9TD/LT
2.5TDi
VOLVO
240/Turbo, 740D / Turbo, 760D/Turbo, 940D/Turbo
Kit
TG0367 Camshaft and Crankshaft
Alignment Tool
For Citroen/Peugeot.
Applications:
Suitable for the latest PSA ET3 code twin cam engines.
Additionally a number of the timing tools required for timing
belt replacement on the ET3JP4(KFU) engines are also called
for in the KFV and KFW 1.4 single camshaft engines.
Kit includes camshaft and flywheel locking pins plus tensioner
locking pin and belt retaining clip.
Citroen/Peugeot “ET Code” (KFC) 1.4 16V.
Twin camshaft petrol and KFV/KFW petrol engines.
Citroen
C2/C3/Pluriel /C4
Peugeot
1007/206/207/307/Berlingo
TG0225
4PCS Engine Timing Tool Set
for-Ford
For BMW M52TU, M54 and M56.
Applications:
BMW:
320 2.0 E46 (98-01) 20 6S 4 M52, 320 2.2 E46 (00-07) 22 6S 1,
330 3.0 E46 (00-07) 30 6S 3 M54, 325 2.5 E46 (00-07) 25 6S 5,
520 2.0 E39 (98-01) 20 6S 4 M52, 520 2.2 E39 (00-03) 22 6S 1,
520 2.2 E60/61 (03-05) 22 6S 1, 523 2.5 (98-01) 25 6S 4 M52,
525 2.5 E39 (00-03) 25 6S 5, 525 2.5 E60/61 (03-05) 25 6S 5,
528 2.8 (98-01) 28 6S 2 M52, 530 3.0 E39 (00-03) 30 6S 3,
530 3.0 E60/61 (03-05) 30 6S 3, 728 2.8 E38/E65/E66 (98-02)
28 6S 2,
730 3.0 E65 E66 (02-05) 30 6S 3, X3 2.5 E83 (03-07) 25 6S 5,
X3 3.9 E83 (03-07) 30 6S 3, X5 3.0 E53 (99-07) 30 6S 3 M54,
Z3 2.0 (99-03) 20 6S 4 M52, Z3 2.8 (99-03) 28 6S 2 M52,
Z3 2.2 (00-03) 22 6S 1 M54, Z3, 3.0 (00-03) 30 6S 3 M54,
Z4 2.5 E85 (03-06) 25 6S 5, Z4 3.0 E85 (03-06) 30 6S 3
Applications:
This new camshaft setting bar is suitable for all the applications
including the latest HWDA / HWDB / HXDA engines.
Also included in the kit is 303-748 (21-259) for Focus / C-Max
1.6,1.4/1.6 and Fiesta / Fusion 1.24/ 1.4/ 1.6.
BMW engine models M42 & M50, includes 2 block swivel lock
plate & locking pin for setting camshaft timing.
For alignment of the cam and crankshafts.
Engine models M40 & M70 include plate & locking pin for
Also enables correct installation of the camshafts with the cam
setting camshaft timing.
cover.
BMW engine models M60 & M62 includes 2 block swivel lock
Applicable:
plate & locking pin for setting camshaft timing.
VOLVO models 850, 960, S40, S70 and S90.
www.handyforce.com
TG-216
TG-217
www.handyforce.com

TIMING SERVICE TOOL - handyforce.com

Transcription

Similar documents

Das New Beetle Cabriolet Das New Beetle Cabriolet

Sortiment

Diese PDF-Datei herunterladen - Biologie Lehren und Lernen

können Sie den Stadtführer von Ems herunterladen.