PLASTIC TECHNIQUES, INC. - Lineman`s Testing Laboratories

Transcription

PLASTIC TECHNIQUES, INC.
BOXES & TRAYS - BUCKET ENHANCEMENTS - BUCKET COVERS & LIDS
BUCKET LINERS - SAFETY EQUIPMENT - SCUFF PADS - TOOLS & TOOL TRAYS
Aerial lift bucket liner under dielectric test at PTI’s new testing laboratory.
The lightning-like corona discharge from liner to water is typical in a 70 to
100kv dielectric test.
UTILITY CATALOG — Rev. Aug-08
Your Number 1 Source for Aerial Lift Bucket Liners and Accessories
About PTI . . .
Plastic Techniques Inc. was incorporated in New Hampshire thirty-four years ago, its
office and plant were located in the town of New Boston, population 922. Actually, things
got off to an inauspicious start during that cold winter of 1968 when a major snow storm,
often referred to as a Nor’easter, stranded the tractor-trailer rigs that were hauling
the new molding equipment to New Boston.
We sat in our 3,000 square foot building, that
waiting for the storm to abate, the roads to be
of drifts, and for our new venture to begin!
once housed a buggy repair business,
cleared, the trucks to be pulled out
Of course, things did eventually get started. We have grown slowly and steadily during
the past third century. Always remembering the customers, past, present and future,
who give us our jobs and keep our company going and growing. We always remember that
commitment: our products are safety related and nothing must compromise the quality
that utilities have come to know and expect.
During the mid-1980’s, we
specifically for our
type of operation.
moved
to
a
new
50,000
square
foot
facility,
designed
and
built
This new facility has
provided room to grow
and its fire resistive
construction and fire
suppression
systems,
heat and water recycling
systems,
air
quality management system, and the like will
allow us to continue to
provide
an
uninterrupted supply of products to our customers
for many years.
Our all new 2004 catalog includes products
in eight different categories all designed to augment the task of the lineman. We hope that as you look through
our product listings, there will be several products that will be helpful to you. There
are a few products that were too new to make the catalog; so, if you don’t see what
you need, call and ask; we may have it or maybe we can custom manufacture it for you.
If you are planning to visit Northern New England, please give us a call. We’ll send
you a map and some tourist information listing the attractions in New Hampshire. When
you get here, we would enjoy showing you our production facility and sharing a cup of
coffee, apple cider or whatever is in season.
FORM
#0001-C
6/99 Rev.5/07
Copyright 2007
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-
Designed
for
use
on
metal
aerial
lift
baskets.
Need an Accessory for your Metal Frame Basket?
Plastic Techniques can help!
Our catalog has a large
lights and tool holders
aerial lift baskets and
them. Nearly all of our
aerial lift baskets can
frame baskets as well.
selection of tool trays,
designed especially for
the people who work in
products designed for
be fitted for metal
Tool Organizers and Impact Wrench Holters
•
Utilitze maximum space efficiency with PTI Tool
Organizers! (can be fitted to your metal frame
basket)
Lighting
PTI offers a vast array of lighting for your on
the job needs. Whether you need a hand held
flashlight or the power of a Litebox with 1
million candlepower or anything in between,
you'll find it in our lighting section.
Tool Trays
•
If your looking for a safe and
convenient way to store yiour tools and
CATV meters, look no further! PTI Tool
Trays are weather resistant and
impervious to motor oil, hydraulic oil
and a broad range of chemicals. PTI
offers over 25 configurations to meet
all your storage needs!
on your particular basket and what we can make for you.
Call us today at 603-645-6800 and tell us the size of the metal tubing
Form
9017-C
02/01 Rev.5/07
Copyright 2007
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
TABLE OF CONTENTS
Click on a Section or Item to Begin Browsing. SECTION 1 – Bucket Enhancements
* Lip Clip/Bucket Seat/EZ Step * Saw Scabbards/Boom Mounted Saw Holder * Lip Protectors/Jumper Holders * Hot Stick Hanging Rail/Folding
Shotgun Holder * Tool Organizer Diagrams * Tool Organizers * Tool Holders * Heaters * B.A.S.S. Universal Bracket System
SECTION 2 – Bucket Covers & Lids
* Lid Series Configuration * Tru-Fit Lids * “Fit-All” Soft Covers & Soft Covers No Foam
SECTION 3 – Bucket Liners
* 2 Safe * Liners w/ Molded Step * Altec Models * Asplundh Models * Baker Models * Hi-Ranger Models * Holan Models * Lift-All Models *
McCabe Models * Pitman Models * Reach-All Models * RO Models * TECO Models * Tel-E-Lect Models * Time/Versalift Models * Utility Body *
Various Mfg. – Aerial Lift, Hunt-Pierce, Dur-A-Lift, Skyworker
SECTION 4 – Safety Equipment
* Aerial Safety Light UL-2A * Replacement Parts UL-2A * Lineman’s Utility Light UL3 * Replacement Parts UL3 * Blanket Canisters * Glove
Box/Line Hose Box * Pole Hauling Lights * Wheel Chocks/Outrigger Pads * Line Hose Spreader * Rainbow & Timberwolf Waterless Hand
Cleaner * Protective Light Base Cover
SECTION 5 – Scuff Pads
* Scuff Pads – All Models Chart * Fiberglass Scuff Pads * “Tru-Grit” Scuff Pads * BD & BDL Scuff Pads * Ergonomic Safety Grating *
Ergonomic Bucket Liner Pads * Hy-Jacker
SECTION 6 – Tools & Tool Trays
* Round Tool Buckets/Canvas Tool Buckets/Line Hose Bags * Canvas Tool Buckets & Bags * Lg Canvas Splicer’s Bag * Splicer Seat & Tool
Box * Tool Tray Models- All * Tool Trays * Tool Trays w/ Docking Station * Semi-Oval Poly Tool Tray * CATV Tool Trays * Inside Mount Tool
Tray * Omni Pouch/Standard Bucket Hooks * 4 Pocket Tool Roll/Hardware Trays * Hydraulic Crimping Head Holder * Intensifier Holders *
Lineman’s Triple Square Wrench * Workman’s Platform * Replacement Parts for Tool Organizers
SECTION 7 – Lighting Equipment
* Stinger Parts & Accessories * Streamlight Rechargeables Parts & Accessories * Stylus/Stylus Reach/Keymate/ 4AA LED/Septor *
Survivor/Scorpion * Litebox * Litebox Holder/HID Litebox & Holder * Vulcan/Hand Held Lights * Aerial Work Light/UL5 Work Light *
Lineman’s Utility Light UL3 * Replacement Parts UL3 * Aerial Safety Light UL-2A * Replacement Parts UL-2A * Pole Hauling Lights
SECTION 8 – Boxes & Trays
* Containment Trays * Containment Vessels * Transformer Maintenance Trays/Utility Boxes SECTION 9 – Information
* Catalog on Disk * Guarantee * Terms & Conditions * Order Form * Repair Center * Return Policy * Test Procedures
— SECTION 1 —
BUCKET ENHANCEMENTS
The aerial lift basket is more than a tool, it is an office. PTI is continuously
looking for ways to make the lineman's job safer and easier. This section, Bucket
Enhancements, contains products that are designed to be rugged and have a long
service life. All of the materials used in the products are the result of extensive research and testing. The Tool Organizers, for instance, required over
eight months of selecting and testing the materials involved. What we have produced is by far THE BEST tool organizer platform available today.
Click on an item or scroll down to browse this section.
•
•
•
•
Lip Clip/Bucket Seat/EZ Step
Chain Saw & Pruning Saw Scabbard/Boom Mounted
Saw Holder
Lip Protector/Jumper Holder
Hot Stick Hanging Rail/Folding Shotgun Stick
Holder
•
Tool Organizer Diagrams
•
Tool Organizers
•
Tool Holders
•
Heaters
•
B.A.S.S. Universal Bracket System
FORM
#3007-C Rev. E
Copyright
5/07
2007
BUCKET
ENHANCEMENTS
BUCKET SEAT
PTI's SPLICER BUCKET SEAT is
made of a special grade of
polyethylene.
•
Form fitting
for a day's
•
Location and height
suit anyone.
•
Repositioning allows
in any direction.
•
Easy
to
seat
work.
remove
-
very
can
when
comfortable
be
adjusted
operator
not
in
to
see
use.
PTI MODEL #
DESCRIPTION
HS
Bucket Seat
ST5-HS
Replacement straps
MODEL #HS
EZ STEP
(U.S.
PATENT
A
New
Solution
to
The quick and easy
aerial
lift
bucket
MODEL # EZ-2
N.
235474)
an
Old
Problem!
way out of an
with
a
liner.
•
Fits all standard 1 man and
man aerial lift buckets!
•
Strong! Lightweight! Impact
resistant polycarbonate!
•
Dielectrically
safe!
No
2
metal!
PT I M O D E L #
D E SC R I PT I O N
EZ- 2
27 inch step rated for 275 lbs
EZ- 2A
Poly EZ Step for wider lip
EZ- 2B
Rated for 350 lbs
211001
Bucket exit step
BUCKET LINER LIP CLIP
Side View
•
Designed to hold
horizontally stored liners
firmly in the bucket.
•
Rugged,
plastic
•
Installs in
hardware.
non-conductive
construction.
seconds
without
InstalledView
SoldinPairs
FORM
#3038-C Rev D
Copyright
5/07
2007
to
BUCKET
ENHANCEMENTS
CHAIN SAW SCABBARDS
Both models hang on either the inside of the bucket, or the outside.
The PTI chain saw scabbards are
designed to hold standard sized
chain saws.
PT I #
D E SC R I PT I O N
C SS
Fiberglass Chainsaw Scabbard
RSS
Replacement Saw Sheath for Model CSS
C S S - 20
Plastic Chainsaw Scabbard
CSS- 21 Outside Mount Plastic Chainsaw Scabbard with strap
C S S - 22
Inside Mount Plastic Chain Saw Scabbard with strap
C S S - 23
Inside Mount Plastic Pruning Saw Scabbard
C S S - 24
Inside Mount Plastic Pruning Saw Scabbard (small
motor)
C S S - 25
Plastic Chain Saw Scabbard, 33"
Models CSS-24, CSS-23 &
CSS-20
Model CSS
BOOM SAW AND PRUNER HOLDERS
The long reach chain saw holder mounts
to the boom of the
truck eliminating work area interference
when not in use.
•
•
•
•
•
Fits virtually all standard aerial
lift booms.
The holder mounts to the boom using
a ratchet for a sure grip.
Made from a specially formulated
polyethylene that has demonstrated
superior resistance to cold weather.
Impervious to hydraulic oils.
Lightweight, durable, resistant to
U.V. degradation
M O D EL
D E SC R I PT I O N
BSH- 4
Boom Mount Chain Saw Holder
C SH
Poly Circular Saw Holder w/ handle clip
PTH
Pruner Tool Holder with handle clip
Model BSH-4
Model CSH
Circular Saw
Model PTH
Hydraulic Pruner
Holder
FORM
#3009-C Rev C
Copyright
5/07
2007
BUCKET
Designed
for
use
on
ENHANCEMENTS
aerial
lift
bucket
trucks
LIP PROTECTORS
Extend
the life of your Buckets and Liners
. . with "PTI" Lip Protectors
.
PTI’s Lip Protectors are made from a special grade of
durable low density polyethylene which offers excellent protection in all kinds of weather.
•
Protects
by tools
against rope chafing, scoring
and normal wear and tear.
•
Fits
•
Permanent
nylon
•
Available
in
snugly
inside
(non
many
Call for availability
without Liner.
MODEL
liner
inside
conductive)
liner
of
or
Lip
and
and
Bucket.
fasteners
Bucket
Protectors
gouging
included.
configurations.
to
fit
buckets
#PC55
M ODEL SHAPE
FI T S PT I L I N E R #
PC15
Rectangular AT- 20, T- 20
P C 55
Square
P- 47, A- 40, T- 39, T- 39S, AL- 41, H- 38, H- 42, L- 41,
RU- 41, TE- 41, TM- 41, RU- 59, BU- 59, U- 59
P C 85
6 Sided
P - 46
PC F- 8
Set of 8
Replacement Fasteners to hold lip protector in.
PCL- 8
Rectangular A- 30 (Limited Availability)
PCL- 42
Rectangular AT- 30 (Limited Availability)
JUMPER HOLDERS
JH1
(tool
not
included)
MODEL
JH2
(tool
not
included)
DESCRIPTION
JH1
Jumper Holder
JH2
Jumper Holder Double
FORM
#3011-C Rev. E
Copyright
5/07
2007
BUCKET ENHANCEMENTS
Designed for use on aerial lift bucket trucks
HOT STICK HANGING RAIL
And Tool Holder
Mechanical - Rugged polyethylene and FRP construction for reliable, field proven
service.
Efficient - Promotes rapid access to storage and retrieval of hot sticks, cutters and
other tools.
Ultraviolet - Inhibitor protects from sunlight degradation.
Carries- Mulitple tools on rigid 3/4" diameter PVC rod.
Impervious - Special polyethylene formula is not affected by hydraulic oils and motor
oils.
Versatile - Can hang on inside or outside of basket.
HSHR
PTI MODEL #
DESCRIPTION
HSHR
Hot Stick Hanging Rail, Outside Mount
HSHR-I
Hot Stick Hanging Rail, Inside Mount
HOT STICK HOLDERS
Helps Protect Hot Sticks at the Job Site
Convenient Aerial Storage ... Space-Saving ... Impact Resistant
Efficiently organizes your aerial work area. Frees up your limited bucket space.
Helps protect the dielectric integrity of hot sticks at job site. Case provides protection
from UV rays and mechanical damage.
Durable polyethylene construction is weather resistant and impervious to hydraulic oils.
Carries one stick up to 40" long and 8" wide when collapsed.
HT-10 and shotgun stick
(not included)
FORM #3063-C Rev 8/08
Copyright 2008
BUCKET
ENHANCEMENTS
TOOL ORGANIZER DIAGRAMS
FORM
#3013-C Rev.D
Copyright
5/07
2007
BUCKET
ENHANCEMENTS
BUCKET ENHANCEMENTS
TOOL ORGANIZERS
•
AVAILABLE FOR METAL FRAME BASKETS.
•
Offers the maximum in space efficiency.
•
Fits virtually all aerial lift buckets.
•
Made of thick durable, polymer.
•
Won’t bloom like fiberglass; eliminates cuts, scratches and irritation
associated with fiberglass.
•
Boards measure 18" x 20" (TO-BH2 is 4"x20").
•
Replacement components available. See catalog section 6.
•
TO-BH2 stores up to 15/16" diameter bits, up to 16" in length.
NOTE: All of the utility components are made from high quality, heavy duty top
grain saddle leather. Canvas bag is an option. Blank boards and customized
configurations available, call for details.
MODEL
#210026
* Tools Not Included
D E SC R I PT I O N
M O D EL # Wit h
LEATH ER B AG
B la nk boa r d
TO -1B
M O D EL # Wit h
C AN VAS B AG
Tool pouche s a nd loops
TO -1
TO -1C
R e configur a t ion of TO -1
TO -1J
TO -1J C
TO -1Y
Fla t poly boa r d wit h br a ck e t s
TO -1YL
TO wit h bit holde r (13" x 1" I D )
TO -2
TO -2C
Simila r t o TO -1 wit h 6 loops
TO -3
TO -3C
Simila r t o TO -3C wit h S-H ook s (AB H 5)
TO -3S
Tool or ga nize r wit h 2 3/4" dia . H ole s -N o B r a ck e t s
TO -3Y
5 la r ge loops a t t op, 2 ca nva s on bot t om
TO -4
TO -4C
Wit h bit holde r a nd e xt r a loops
TO -5
TO -5C
Tool pouch a nd 2 t ool holde r s
TO -6
TO -6C
old s t yle
Tool pouch a nd 2 t ool holde r s ne w s t yle
TO -6YL
Wit h 2 ca nva s ba gs a nd 2 s e t s of loops
TO -1 w/5 Pock e t Le a t he r Line ma n' s H ols t e r w/Sna p
TO -7C
210001
4 loops , 1 t ool holde r a nd 1 le a t he r pouch
210010
3 loops , 2 t ool holde r s a nd 1 k nife s he a t h
210011
Tool O r ga nize r old s t yle w/S H ook s & le a t he r pouch
210018
Tool O r ga nize r w/TP7, C a nva s ba g, Le a t he r O r g.
210020
Tool O r ga nize r w/2 Lg H a mme r Loop 2 s m Loops , t ool holde r, ca nva s
ba g
TO -5 wit h M e t a l H a mme r Loop
210021
210024
TO -2C w/ M e t a l H a mme r Loop
210025
Tool O r ga nize r w/ C a nva s
210026
TO w/2 Le a t he r pouche s , bit holde r & 1 of a ll ot he r R P' s
210 028
TO -5 O r ga nize r t o fit s t e e l pla t for m
210029
TO -4 M inus loops , w/ TP-7 pouch
210030
TO -2 St yle w/ Tr a y
210033
Tool O r ga nize r w/Auge r B it H olde r & Ext r a Tool H olde r s
210034
TO -6YL w/ H ole s
210051
Tool O r ga nize r w/5 Lg. loops , 2 ca nva s ba gs , fla t boa r d
210052
Tool B oa r d w/ cot t on we bbing, ca nva s ba g, bit holde r, t ool holde r
210053
FORM #3012-C Rev. G 5/07
Copyright 2007
BUCKET ENHANCEMENTS
TOOL HOLDERS
•
•
Fits virtually all aerial buckets.
•
New! Non-fiberglass construction of semi-flexible polymer material.
•
Won't Bloom like fiberglass; eliminates cuts, scratches and irritation
associated with fiberglass.
•
Excellent dielectric, cold weather, chemical resistance and U.V. properties.
•
Field reversible left or right.
•
All Holsters available with either Inside or Outside Mount,
•
IWH2 Fits Burndy Crimping Tool #BCT500.
•
•
Standard color is yellow.
MODEL # IWH-5
MODEL #219030
MODEL #219039
MODEL #IWH SERIES
NOTE: Closed bottom design requires that bit be removed from wrench
before storing to prevent electrical contact hazard associated with exposed
conductive bit. IWH4 and IWH5 series holders also have closed bottom but
will store tool with bit attached.
MODEL #IWH2 SERIES
D E SC R I PT I O N
OUTSI DE
M OUNT
I N SI D E
M OUNT
FI T S
G R EEN LEE
FI T S
BUR NDY
FI T S
STANLEY
10" deep fits wrench only
IWH
IWH- I
YES
YES
NO
IWH Model with 2 1/2" clip type bracket
N/A
219008
YES
YES
NO
13" Deep, fits wrench with socket attached
IWH2
IWH2- I
YES
YES
YES
Same as IWH2 style but includes integrated 19" Deep Holster for bit
IWH3
IWH3- I
YES
YES
YES
27" Deep, wide model, fits wrench with bit attached
IWH4
IWH4- I
YES
YES
YES
Same as IWH4 style, but includes integrated 19" Deep Holster for bit
219009
219011
YES
YES
YES
29" Deep, fits wrench with bit attached
IWH5
IWH5- I
YES
YES
NO
Same as IWH style, but includes integrated 19" deep holster for bit
IWH6
IWH6- I
YES
YES
NO
Burndy Crimper Holder
219028
Holder for Fairmont EK425
219044
Battery Tool Holder, Long
219030
Impact Wrench Holster, xtra deep, Rt hand
219034
YES
MODEL # IWH-6 SERIES
MODEL # IWH-4 SERIES
MODEL #219029
219029
Patriot Inline Tool Holder, Red
219037
Inline Holder, Yellow (available in other colors)
219038
Inline Holder, Blue
219039
MODEL #IWH3 SERIES
BUCKET
ENHANCEMENTS
HEATERS
Bucket
Mounted
Heater
FOR
AERIAL
PLATFORMS
AND
TENTS
Designed to mount inside any aerial lift bucket whether its shape is square, rectangular, or round.
Louvered vents on unit’s face direct heat downward.
Can be wall-mounted as well. Auto shut-off activates
if the unit tips in any direction. Waterproof cord,
grommets and rubber covered switches are standard.
Metal housing is cool to the touch.
MODEL
#
Tent
HTR-1
Heater
M O D EL
H TR -1
H TR -2
Description
Bucket mounted heater
Tent Heater
Dimensions
6.5" x 5.75" x 3.75 "
3.75" x 5" x 5.75 "
Voltage
115 VAC
115 VAC
Amps
13A reduces to 3A
13A reduces to 3A
Watts
1500 reduces to 350
1500 reduces to 350
BTUs
5200 max
5200 max
Cord
8 feet
8 feet
Weight
5 lbs
5 lbs
For tent, platform, or garage heating needs. Wire mesh
face protects heating elements. Auto shut-off activates
if the unit tips in any direction. Waterproof cord,
grommets and rubber covered switches are standard.
Metal housing is cool to the touch.
HEATERS
MODEL
#
FOR
HTR-2
AERIAL
LIFT
PLATFORMS
Ideal for Telephone Splicer trucks,
trucks, Bridge Inspection trucks,
insulated bucket applications.
Window
MODEL
#
Cable TV Splicer
and all non-
Defogging/Defrosting
M O D EL
H TR -60
H TR -70
Descrpition
Airflow is directed out of the
bottom by deflector plate
Airflow is directed out of the
bottom by deflector plate
Dimensions
8" x 10" x 3.25"
8 " x 10 " x 3 . 2 5 "
Voltage
115 VAC
230 VAC
Amps
13.5
6.25
Watts
1500
15 0 0
Cycles
60 HZ
50/60 HZ
BTUs
5 0 00
5000
Cord
8 ft.
8 ft.
Weight
3 lbs.
3 lbs.
HTR-60
FORM
#
2014-C Rev B
Copyright
5/07
2007
BUCKET
ENHANCEMENTS
The B.A.S.S.
Universal Bracket System
AVAILABLE
Tool
FOR
"B.A.S.S.
SYSTEM"
Trays
Organizers
Chain
Saw
Scabbards
Crimper
Head
Litebox
Holders
Impact
Hardware
Wrench
Trays
Holders
Holders
and
more...
STEP 1: Clip the "B.A.S.S. Bracket"
lip of your basket and leave it.
STEP 2:
needed.
Use
one
"B.A.S.S.
accessories.
Bracket"
Lock
on
different
over
accessories
the
as
PTI M ODEL #
DESCRIPTION
818001
B.A.S.S. Mounting Unit
818010
Vinyl Tool Apron for use with B.A.S.S.
818020
TO-1C Tool Organizer Board for use with B.A.S.S.
818040
319018 Tool Tray for use with B.A.S.S.
818050
LBH2-Y Litebox Holder for use with B.A.S.S.
818060
PCP-2 Compression Tool Holder for use with B.A.S.S.
818070
IWH-R Impact Wrench Holder for use with B.A.S.S.
and
interchange
your
Plastic
Techniques
basket
FORM #3120-C
Copyright
5/07
2007
— SECTION 2 —
BUCKET COVERS & LIDS
PTI covers and lids provide weather protection for aerial baskets. Seal your
aerial basket with either our Soft Covers or Hard Covers.
The Soft Covers are double sided for double the life. The foam creates a
semi rigid profile that allows water to run-off, yet can be comfortably
stored.
The Hard Covers provide rigid protection for snow and ice build up. Constructed of rugged polyethylene with U.V. inhibitor added. These lids are
light weight yet are strong and impact resistant.
The No Foam Soft Covers offer a light weight weather resistant seal for your
bucket. Constructed of the same quality materials as our Soft Covers with
foam.
•
•
•
Lid Series Configuration
Tru-Fit Lids
"Fit All" Soft Covers
Soft Covers - No Foam
FORM
#0004-C Rev B
Copyright
5/07
2007
LID SERIES CONFIGURATIONS
MODEL
MODEL
#5A48
#28DH-X
MODEL
#5A48-FSP
NOTE: Cross
Straps
NOTE: Two way
adjustable strap
NOTE:
MODEL
Cross
Strap
MODEL
#5F48-X
MODEL
#RA50
#5F48
NOTE: Cross
Straps
No Cross
Straps
MODEL
#5F48-C
safety
lanyard
MODEL
#5TD48
No Cross
Straps
NOTE: Cross
Straps
NOTE: Cross
Strap
FORM
#
3017-C Rev.C
Copyright
5/07
2007
TRU-FIT LIDS
Shaped to shed ice and snow.
Easy on and off by one person.
Strap buckle or snap cord closure.
Fits permanently: No shrinking, sagging or tearing.
Replacement Strap Sets are available. For model numbers refer to Replacement Parts at end of Tools & ToolTrays section.
These rigid, tough, polyethylene covers seal your bucket against driving rain, ice and snow.
MODEL #: 5A30
MODEL #5A48
PTI
M OD EL #
AER IAL LIFT M FR .
SHAPE
M AXIM UM
B UCKET R IM
Lx W
28L32
VERSALIFT, ALTEC
HI-RAN GER, HO LAN ,
LIFTALL, TEL-E-LEC T
REC TAN GLE
28 x 32
28DH-X
DIGGERDEREK ,
w/shaft and brake cover
SQ UARE
29.5 x 29.5
2L28S
HO LAN , ALTEC , TEL-E-LEC T SQ UARE
29.5 x 29.5
2L28N
SAME AS ABO VE BUT W ITH W EBBIN G
2W 28S
ASPLUN DH
6-SIDED
32.5 x 29
2W 46N
PITMAN
6-SIDED
29.5 x 27.5
30L34
ALTEC , ASPLUN DH,
TEL-E-LEC T
REC TAN GLE
30 x 34
411036
VARIO US
REC TAN GLE
28 x 32
411037
VARIO US
REC TAN GLE
30 x 34
411038
VARIO US
SQ UARE
29.5 x 29.5
411039
REAC H-ALL
D-SHAPED
44 x 63
411041
VARIO US
REC TAN GLE
53 x 30
411042
VARIO US
REC TAN GLE
53 x 30
5A30
ALTEC (24 x 30)
REC TAN GLE
32.5 x 26.5
5A48
ALTEC
REC TAN GLE
50.5 x 28
5A48-FSP
TEL-E-LEC T W /C O N TRO L
C O VER
REC TAN GLE
59.5 x 27.25
5F30
HI-RAN GER (24 x 30)
REC TAN GLE
32.5 x 26.5
5F38
HI-RAN GER
REC TAN GLE
40 x 26
5F48
HI-RAN GER
REC TAN GLE
50.5 x 27
5F48-X
HI-RAN GER
REC TAN GLE
50.5 x 27
5TD48
HI-RAN GER
REC TAN GLE
50.5 x 28
6HT-C
HI-RAN GER
K IDN EY
61 x 36
6TV
TEC O
K IDN EY
61 x 37.5
FB701*
REAC HALL
O VAL
RA50
REAC H-ALL
6-SIDED
54.5 x 33
10A96
HI-RAN GER
REC TAN GLE
62.5 x 28.5
FORM
#3016-C
Rev.
Copyright
G
5/07
2007
BUCKET
COVERS
&
LIDS
"FIT ALL" SOFT COVERS
The FITALL-I, FITALL-V, FITALL-II and FITALL-K were designed to shed water. A 2" piece of foam is sewn into the cover
to create a domed effect to eliminate puddling. The FITALL-II covers have two light weight reinforcing dowels.
The same heavy duty vinyl coated nylon is used on the underside of the cover, so that it is reversible and gives you twice
the life.
For those customers interested in the soft cover without the foam fill, they are available in the chart below. The model
numbers with the suffix “NF” refers to No Foam.
Made of a heavy duty vinyl coated nylon.
Available in black, safety yellow, safety orange, and white.
4' lanyard with a brass swivel.
Layered 55-45 to reduce wind-whip.
/ " elastic rope sewn into the hem.
3 4
Available to fit virtually any size tray or bucket.
PTI MODEL #
DESCRIPTION
FITALL-I
Fits 24 x 24 Buckets
FITALL-II
FITALL-V
FITALL-K
Fits Hi-Ranger and Teco kidney styles
FITALL-NFI
Single man cover/No Foam
FITALL-NFII
Two man cover/No Foam
1TB-SCT
Soft cover for 1TB, 3TB, CTB 20TB
FITALL-IBC
Fits 24 x 24 Buckets with Brake cover
FITALL-NFV
Fits 24 x 30 Bucket/ No foam
410001
Soft Cover w/Foam for Basket & control guard
410016
Soft Cover black for 2TB, 1TB-RA, 5DTB, 7DTB, 8DTB
410018
Soft Cover WMTB Tool Tray
410019
1 1/2 Man w/Foam & attached control cover 24x30
410020
Oversized 2 man with foam 58 x 36
410021
Control Cover with lanyard 15 x 9
410022
Same as FITALL-R without control cover
410023
Soft Cover Oversized 1 1/2 man, yellow, no foam
410031
Soft Cover, black for 2TB w/table top
410033
Soft Cover, Foam, 32"x26", Yellow, fits control cover
410034
Soft Cover semi-oval tool tray
FITALL-I
FITALL
FORM
NFI
#3015-C
Rev.
Copyright
C
5/07
2007
Designed
for
use
on
aerial
lift
bucket
trucks
— SECTION 3 —
BUCKET LINERS
•
PTI utilizes a specially formulated
demonstrated superior resistance to
•
PTI’s resin can
an ultra-violet
•
Dielectrically
•
Molded
from
specially
construction.
•
All
•
A
two
year
•
Liners
with
•
Liners with
Number.
•
70kv
•
Color
•
Liners
•
When
liners
made
molded
molded
shipped
to
blended
on
step
steps
call
the
liners
tested
all
are
meet
use
of
Guaranteed.
linear
to
the
low
density
withstand
50kv
polyethylene
AC/RMS
for
1
for
durable
minute.
safety
identified
and
by
convenience
an
“S”
at
when
the
end
exiting
buckets.
of
PTI
the
Model
details.
call
ANSI
and
has
liners.
provide
for
available,
tested
Certified
and
guarantee
available,
code
that
be identified by a tinge of yellow resulting from
inhibitor that reduces sunlight degradation.
Tested,
are
low density polyethylene
cold weather problems.
for
92.2
and/or
details.
and
CSA
exceed
C225-M88
the
ANSI
standards.
92.2
and
CSA
C225-M88.
2 Safe Bucket Liners
McCabe
PTI Liners with Molded Step
PITMAN
ALTEC
REACH-ALL
ASPLUNDH
RO
BAKER
TECO
HI-RANGER
TEL-E-LECT
HOLAN
TIME/VERSALIFT
LIFT-ALL
UTILITY BODY
VARIOUS MANUFACURERS Arial Lift • Hunt-Pierce • Dur-A-Lift • Skyworker
FORM
#1012-C Rev C
Copyright
5/07
2007
BUCKET
Designed
for
use
on
aerial
LINERS
lift
PTI IS PROUD TO INTRODUCE THE
bucket
trucks
LINER!
From the company with over 30 years of innovation
experience, the
liner provides an added level
of user support and safety. By providing visible
indication of wear, daily inspections are more accurate
and easier to perform. In the lab, the savings in time
are obvious. Find the holes before the electrical stage
of in-service retesting!
Our
liners feature two distinct color
layers which are molecularly bonded during the
molding process. In effect, our liners are a single layer
with two color strata that cannot separate.
The main color (outside and thicker) has been designed
and tested to pass required periodic retests, the
secondary color (inside and thinner) is a wear layer
designed to make it easy for crews to do daily visual
inspections of this safety equipment. A dangerously
worn or gouged inner liner wall will show the
outer/main color, indicating a possible unsafe
condition. This liner should then be replaced and
retested according to each individual company’s work
practices.
PTI 2Safe 50kv Liner
liners carry the standard PTI warranty.
Copyright 04/2007
Form 2safe
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks:
BUCKET LINERS WITH MOLDED STEP
Sometimes the easiest solution to a problem is to avoid the conditions
which lead to the problem. That’s why at PTI we build bucket
liners with a molded step. By ordering your liner with a
built-in molded step you avoid difficulties in exiting the
bucket before they occur. You also avoid the “fit” problems of
removable steps ordered at a later date. So why not avoid
problems before they occur... order your next liner with a
built-in molded step.
At PTI we are always adding new liners with molded steps. So if
you don’t see your liner listed here, then give our Sales
Department a call at 603-645-6800. Remember, at PTI we are
always bending over backwards to meet our customers’ needs!
LINER
SPECIFICATIONS
PTI
M O D EL #
M F G.
SH APE
D IM E N S IO N S IN IN C H E S
(a s a b o v e )
N O .PER
B O X
P T I A C C E S S O R Y IT E M S
----------
--------
--------
A
B
C
D
E
------
L ID S
SC U FF
PA D S
A -28S
A LT E C
R e c t.
41
28
22
21
27
1
2 8 L 3 2 /5 F 3 0
D -28-N
D S-8
A -30S
A LT E C
R e c t.
41
29
23
21
27
2
28L32
512001
D S-32A
A -39S
A LT E C
S q ua re
39
24
24
22
22
3
2L28
D -21-N
D S-4
A -47S
A LT E C
S q ua re
42
2 3 .5
2 3 .5
2 1 .5
2 1 .5
3
2L28
D -21-N
D S-6
A -48S
A LT E C
R e c t.
42
4 6 .5
2 2 .5
2 1 .5
4 5 .5
1
*
D -46-N
D S - 11
A L-41S
A LT E C
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
AT- 3 0 S
A LT E C
R e c t.
39
2 9 .5 2 3
5
21
27
5
30L34
D -26-N
D S-8
D L-42S
D U R - A - L IF T
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
H -30S
H O LA N
R e c t.
40
2 8 .5
2 2 .5
21
27
2
28L32
D -26-N
D S-33
H -42S
H O LA N
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
H -88S
H O LA N
R e c t.
41
28
22
21
27
1
5F30
D -26-N
D S-8
*
S c u ff P a d s
w /s t e p
L-41S
L IF T- A L L
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
LA -28S
L IF T- A L L
R e c t.
41
28
22
21
27
1
2 8 L 3 2 /5 F 3 0
D -26-N
D S-8
D S - 11
LA -46S
L IF T- A L L
R e c t.
41
46
22
21
27
1
*
D -46-N
M S-47S
M cC A BE
S q ua re
42
24
24
22
22
3
2L28
D -21-N
D S-6
P-47S
P IT M A N
S q ua re
42
23
23
22
22
3
2L28
D -21-N
D S-6
R-28S
H I- R A N G E R
R e c t.
41
28
22
21
27
1
2 8 L 3 2 /5 F 3 0
D -26-N
D S-8
R-48S
H I- R A N G E R
R e c t.
41
46
22
21
45
1
*
D -46-N
D S - 11
D S-6
RO -47S
RO
S q ua re
42
23
23
22
22
3
2L28
D -21-N
RU -41S
REA C H A LL
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
T- 3 9 S
TEL-E-LEC T
S q ua re
39
24
24
22
22
4
2L28
D -21-N
D S-4
T- 4 2 S
TEL-E-LEC T
S q ua re
42
23
23
22
22
3
2L28
D -21-N
D S-6
TE-28S
TEC O
R e c t.
41
28
22
21
27
1
2 8 L 3 2 /5 F 3 0
D -26-N
D S-8
TE-41S
TEC O
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
TM -41S
T I M E /V E R S A L I F T
S q ua re
42
24
24
21
21
4
2L28
D -20-N
D S-1
TM -42S
T I M E /V E R S A L I F T
S q ua re
42
23
23
22
22
2
2L28
D -21-N
D S-6
U -42S
U T IL B O D Y
S q ua re
42
23
23
22
22
3
2L28
D -21-N
D S-6
Choose
5A48,
5F48,
or
5TD48
Configuration
FORM
#1016-C Rev. E
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
ALTEC
A is measured from
the bottom of the
rim to the base of
the liner.
B & C measurements
are taken one inch
down from beneath
the lip, on the
outside of the
liner.
NOTE: All dimensions shown in chart
below refer to the
OUTSIDE of the
liner, or INSIDE of
the bucket. All
measurements are
rounded to the nearest half inch.
D & E measurements
are taken three
inches up from the
bottom, on the
outside of the
liner. This eliminates distortion
due to the radius
of the corners.
LINER
SPECIFICATIONS
PT I
M O D EL #
M FG.' S
CO D E
SH APE
N O .P E R
BO X
-----------
-----------
-----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
A- 28
704- 20055
Rect.
41
28
22
21
27
2
28L32/5A30
D- 28
DS- 8/DS- 8A
A- 28S
704- 20652
Rect.
41
28
22
21
27
2
28L32/5A30
D- 28- N
DS- 8
A- 30
704- 20718
Rect.
41
29
23
21
27
2
28L32
D- 26
DS- 32/DS- 32A
D I M E N SI O N S I N I N C H E S
(a s a bove )
PTI ACCESSO RY I TEM S
A- 30S
704- 21042
Rect.
41
29
23
21
27
2
28L32
512001
DS- 32A
A- 39
704- 20205
Square
39
24
24
22
22
4
2L28
D- 21
DS- 6
A- 39S
________
Square
39
24
24
22
22
3
2L28
D- 21- N
DS- 4
A- 47
O C_____
Square
42
2 3 .5
23.5
2 1. 5
21.5
4
2L28
D- 21
DS- 6
A- 47S
O C_____
Square
42
2 3 .5
23.5
2 1. 5
21.5
3
2L28
D- 21- N
DS- 6
DS- 11/DS- 11A
A- 48
704- 20053
Rect.
42
46.5
22. 5
21.5
45.5
1
5A48
D- 46
A- 48S
704- 20675
Rect.
42
46.5
22. 5
21.5
45.5
1
5A48
D- 46- N
DS- 11
A- 49
704- 20073
6- Side
42
2 4 .5
24
21
21
3
2W46
D- 23
DS- 25
AL- 41
704- 20365
704- 20137
704- 20003
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
AL- 41S
704- 20688
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
AT- 30
7 0 4 - 2 0 5 28
Rect.
39
2 95
23. 5
21
27
5
30L34
D- 26
DS- 8/DS- 8A
AT- 30S
________
Rect.
39
29.5
23.5
21
27
5
30L34
D- 26- N
S = Liner with Molded Step
FORM
#1000-C
ALTEC Rev.G
Copyright
DS- 8
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
ASPLUNDH
A is measured from
the bottom of the
rim to the base of
the liner.
B & C measurements are taken
one inch down from beneath the
lip,ontheoutsideoftheliner.
D & E measurements
are taken three
inches up from the
bottom, on the
outside of the
due to the radius
of the corners.
LINER
NOTE: All dimensions shown in
chart below refer
to the OUTSIDE of
the liner, or INSIDE of the bucket.
All measurements
are rounded to the
nearest half inch.
SPECIFICATIONS
PT I
M OD EL #
M FG.'S
COD E
S H A PE
------------
------------
------------
A
B
C
D
E
------------
L ID S
S C U FF
PA D S
S C U FF PA D S
W IT H S T E PS
A-40
026-0315
LB S tyle
S q ua re
40
24
24
21
21
4
2W 28*
2 L2 8 *
D-20
DS-2
AT- 2 0
A sp lund h
R ect.
39
2 3 .5
20
18
22
4
F ITA LL- I
D-24
DS-9
AT- 3 0
1 4 1 - 0 2 11 - 0 2
R ect.
39
2 9 .5
2 3 .5
21
27
5
3 0 l3 4
D-26
DS-8
AT- 3 0 S
1 4 1 - 0 2 11 - 0 2
R ect.
39
2 9 .5
2 3 .5
21
27
5
3 0 l3 4
D-26-N
DS-8
D IM E N S IO N S IN IN C H E S
(a s a bo v e )
N O .PE R
B OX
PT I A C C E S S O R Y IT E M S
* 2L28 Fits without controls, 2W28 fits with controls.
S = Liner with molded step
FORM
#1001-C
ASPLUNDH Rev. E
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
BAKER
A is measured from the
bottom of the rim to
the base of the liner.
B & C measurements are
taken one inch down
from beneath the lip,
on the outside of the
liner.
D & E measurements
are taken three
inches up from the
bottom, on the
outside of the
due to the radius
of the corners.
LINER
PTI
M FG.'S SHAM OD EL # COD E
PE
SPECIFICATIONS
D IM EN SION S IN IN CHES
(as above )
-----------
--------
-------
A
B
C
D
E
BU-59
BAK ER Square
39
23.5
23.5
20
20
B-50
BAK ER
42
54
25
23.5
52
K idney
NOTE: All dimensions shown in
chart below refer
to the OUTSIDE of
the liner, or INSIDE of the bucket.
All measurements
are rounded to the
nearest half inch.
N O.PER
B OX
PTI ACCESSORY ITEM S
LID S
SCUFF
PAD S
SCUFF PAD S
WITH STEPS
4
2L28
D-19
DS-15
1
----
----
----
------------
FORM
#1020-C
Baker Rev.B
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
HI-RANGER
bottom of the rim to the
base of the liner.
taken one inch down from
beneath the lip, on the
outside of the
D & E measurements are
taken three inches up
from the bottom, on the
outside of the liner.
This eliminates distortion due to the radius
of the corners.
LINER
NOTE: All dimensions
shown in chart below refer
to the OUTSIDE of the
liner, or INSIDE of the
bucket. All measurements
are rounded to the nearest
half inch.
SPECIFICATIONS
PT I
M O D EL #
M FG.' S
CO D E
SH APE
-----------
-----------
-----------
A
B
C
D
E
----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
R- 22
O .C .
Rect.
41
24
20
18
22
3
FITALL- I
D- 34
DS- 10
R- 24
4F40/4E
Square
41
22
22
21
21
2
FITALL- I
D- 20
DS- 14
R- 28
5Fi52
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28
DS- 8/DS- 8A
R- 28S
5Fi52
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28- N
DS- 8
R- 38
4F 35
Rect.
41
36
22
21
35
1
5 F 38
D- 38
DS- 19
R- 48
5TD/5Fi48
Rect.
41
46
22
21
45
1
*
D- 46
DS- 11/DS- 11A
R- 48S
5TD/5Fi48
Rect.
41
46
22
21
45
1
*
D- 46- N
DS- 11
R- 66
6TD
K idney
42
57
30
29
56
1
6HT- C
D- 66FG
DS- 28
R- 66
6EHV/6TD
non- foam
K idney
42
56
30
28
54
1
6HT- C
D- 68
DS- 29
* Choose
S= Liner
5A48, 5F48,
with Molded
(a s a bove )
or 5TD48
Step
Configuration,
please
N O .P E R
BO X
see
FORM
catalog
#1002-C
section
2
for
details.
HI-RANGER REV.G
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
HOLAN
base of the liner.
This eliminates distortion due to the radius of
the corners.
LINER
PT I
M O D EL #
-----------
M FG.' S
CO D E
SH APE
----------- -----------
SPECIFICATIONS
(a s a bove )
A
B
C
shown in chart below
refer to the OUTSIDE of
the liner, or INSIDE of
the bucket. All measurements are rounded to the
nearest half inch.
D
N O .P E R
BO X
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
H- 18*
See below
Square
38.5
22.5
22.5
21
21
2
FITALL- I
D- 20
DS- 20
H- 28
8007- 23
Square
38.5
23
23
22
22
2
2L28
D- 21
DS- 5
H- 30
8007- 50
Rect.
40
28. 5
22.5
21
27
2
28L32
D- 26
DS- 8/DS- 8A
H- 30S
HO LAN
Rect.
40
28. 5
22.5
21
27
2
28L32
D- 26- N
DS- 33
H- 38
8007- 38
Square
38
24
24
23
23
3
2L28
D- 22
DS- 17
H- 39
8007- 39
Square
39
24
24
23
23
2
2L28
D- 22
DS- 18
H- 42
8007- 42
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
H- 42S
8007- 42
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
H- 50
8007- 48
Rect.
42
47
23
21
45
1
RA50
D- 46
DS- 12/DS- 12A
H- 88S
HO LAN
Rect.
41
28
22
21
27
2
28L32/
5F 30
D- 28- N
DS- 8
H- 88
8007- 45
Rect.
41
28
22
21
27
2
28L32/
5F 30
D- 28
DS- 8/DS- 8A
*The H-18 HOLAN Liner is an undersized H-28 style intended to fit older repaired
buckets or undersized buckets which may be still in use. It is advisable to check
dimensions before ordering this liner style.
FORM
S
=
Liner
with
Molded
Step
#1003-C
HOLAN Rev.F
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
LIFT - ALL
base of the liner.
This eliminates distortion due to the
radius of the corners.
LINER
PT I
M O D EL #
-----------
M FG.' S
CO D E
SH APE
----------- -----------
nearest half inch.
SPECIFICATIONS
(a s a bove )
N O .P E R
BO X
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
L- 41
Lift- All
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
L- 41S
Lift- All
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
LA- 46
Lift- All
Rect.
41
46
22
21
45
1
*
D- 46
DS- 13/DS- 13A
LA- 46S
Lift- All
Rect.
41
46
22
21
45
1
*
D- 46- N
DS- 13
LA- 28
Lift- All
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28
DS- 8/DS- 8A
LA- 28S
Lift- All
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28- N
DS- 8
* Choose
S= Liner
5A48, 5F48,
with Molded
or 5TD48
Step
Configuration,
please
see
catalog
FORM
section
#1018-C
2
for
details.
Lift-All Rev.E
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
McCABE
base of the liner.
of the corners.
shown in chart below refer
to the OUTSIDE of the
liner, or INSIDE of the
bucket. All measurements
are rounded to the nearest
half inch.
LINER
PT I
M O D EL #
M FG.' S
CO D E
SH APE
SPECIFICATIONS
(a s a bove )
N O .P E R
BO X
----------- -----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
MS- 39
-----------
Square
39
23
23
20
20
4
2L28
D- 19
DS- 21
MS- 40
CWN - 9
Square
39
23
23
20
20
4
2L28
D- 19
DS- 21
MS- 41
CWN - 10
CWN - 11
Square
42
23
23
19
19
4
2L28
D- 18
DS- 22
MS- 43
CWN - 14
6- side
42
23.5
2 1. 5
2 0 .5
2 1. 5
2
2W43
D- 43
DS- 23
MS- 47
-----------
Square
42
24
24
22
22
3
2L28
D- 21
DS- 6
MS- 47S
-----------
Square
42
24
24
22
22
3
2L28
D- 21- N
DS- 6
-----------
S
=
Liner
with
molded
step
FORM
#1004-C
McCABE Rev.D
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
PITMAN
base of the liner.
D & E measurements are taken
three inches up from the
bottom, on the outside of
the liner. This eliminates
distortion due to the radius
of the corners.
LINER
NOTE: All dimensions shown
in chart below refer to
the OUTSIDE of the liner,
or INSIDE of the bucket.
All measurements are
rounded to the nearest
half inch.
SPECIFICATIONS
PT I
M O D EL #
M FG.' S
CO D E
SH APE
-----------
-----------
-----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
P - 45
-----------
Rect.
38
24
19
17.5
20.5
4
FITALL- I
D- 45FG
DS- 24
P - 46
BN - 1
078- 35- 0840
6- side
42
23
24
19.5
20
3
2W46N
D- 23
DS- 7L/DS- 7R
P - 47
BN - 6
Square
42
23
23
22
22
3
2L28
D- 21
DS- 6
P - 47S
BN - 6
Square
42
23
23
22
22
3
2L28
D- 21- N
DS- 6
P - 49
PTI 6PW
6- side
42
24
24.5
21
21
3
2W46N
D- 23
DS- 25L/DS- 25R
P - 52
MN
078- 49- 0552
K idney
42
55
24
22
52
1
N /A
D- 52FG
DS- 26
Liner
Molded
Step
S
=
with
(a s a bove )
N O .P E R
BO X
FORM
#1005-C
PITMAN Rev.D
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
REACH-ALL
of the corners.
base of the liner.
LINER
PT I
M O D EL
#
M FG.' S
CO D E
SH APE
----------- ----------- -----------
the bucket. All measurements are rounded
to the nearest half
inch.
SPECIFICATIONS
(a s a bove )
N O .P E R
BO X
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
RE- 50
871100
Rect.
42
47
23
21
45
1
RA50
D- 46
DS- 12/DS- 12A
RU- 41
361716
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
RU- 41S
Reach- All
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
RU- 59
871000
Square
39
2 3 .5
23.5
20
20
4
2L28
D- 19
DS- 15
S
=
Liner
with
molded
The
manufacturer's
aerial
baskets
in
Step
code
numbers
listed
above
which
PTI
liners
fit.
are
FORM
the
part
#1006-C
numbers
of
the
REACH-ALL Rev. D
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
RO
base of the liner.
of the corners.
LINER
PT I
M O D EL #
-----------
M FG.' S
CO D E
SHAPE
----------- -----------
nearest half inch.
SPECIFICATIONS
(a s a bove )
N O .P E R
BO X
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
RO - 47
RO
Square
42
23
23
22
22
3
2L28
D- 21
DS- 6
RO - 47S
RO
Square
42
23
23
22
22
3
2L28
D- 21- N
DS- 6
RO - 49
RO
6- sided
42
24.5
24
21
21
3
2W46
D- 23
DS- 25
S=Liner
with
molded
Step
FORM
#1019-C
RO Rev.C
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
TECO
base of the liner.
taken three inches up from
the bottom, on the outside
of the liner. This eliminates distortion due to the
radius of the corners.
nearest half inch.
LINER
*
N O .PER
BOX
PTI
M O D EL #
M FG.'S
COD E
S H A PE
-----------
-----------
-----------
A
B
C
D
E
-----------
LID S
D IM EN S IO N S IN IN C H ES
(a s a bo ve )
PTI A C C ES S O R Y ITEM S
S C U FF
PA D S
S C U FF PA D S
W ITH S TEPS
TE- 2 8
TEC O
Rect.
41
28
22
21
27
2
2 8L3 2 /5 F 30
D - 28
D S - 8 /D S - 8A
TE- 2 8 S
TEC O
Rect.
41
28
22
21
27
2
2 8L3 2 /5 F 30
D-28-N
DS-8
TE- 41
TEC O
S q uare
42
24
24
21
21
4
2L2 8
D - 20
DS-1
TE- 4 1 S
TEC O
S q uare
42
24
24
21
21
4
2L2 8
D-20-N
DS-1
TEC O
K id ney
Ro und F ront
42
57
18
18
5 6.5
1
6 TV
N /A
D S - 31
TE- 6 7
S=
SPECIFICATIONS
TE- 4 8
TEC O
Rect.
41
46
2 2.5
21
45
1
*
D - 46
D S - 11 /D S - 11 A
TE- 4 8 S
TEC O
Rect.
41
46
2 2.5
21
45
1
*
D-46-N
D S - 11
TE- 5 4
TEC O
K id ney
Ro und F ront
42
54
3 1 .5
30
52
1
F B6 01 B
-----
DS-44
Choose
Liner
5A48, 5F48,
with Molded
or 5TD48
Step
Configuration,
please
see
TE-67 - this converts the walk through to 13 inches.
catalog
FORM
section
#1007-C
2
for
details.
TECO Rev.E
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
TEL-E-LECT
base of the liner.
of the corners.
LINER
the bucket. All measurements are rounded
to the nearest half
inch.
SPECIFICATIONS
PTI
M O D EL
#
M FG.'S
COD E
S H A PE
-----------
-----------
-----------
A
B
C
D
E
-----------
LID S
S C U FF
PA D S
S C U FF PA D S
W IT H S TEPS
T- 2 0
BF B
Rect.
39
2 3 .5
20
1 7.5
22
4
F ITA LL- I
D-24
DS-9
T- 2 8 E
-------
Rect.
41
28
22
21
27
2
2 8 L3 2/5 F 3 0
D-28
D S - 8 /D S - 8A
T- 2 8 ES
H I- RA N G ER
Rect.
41
28
22
21
27
2
2 8 L3 2/5 F 3 0
D - 2 8- N
DS-8
T- 3 9
26 7 7
S q uare
39
24
24
22
22
4
2 L2 8
D-21
DS-6
T- 3 9S
26 7 7
S q uare
39
24
24
22
22
4
2 L2 8
D - 2 1- N
DS-4
T- 4 2
26 7 8
S q uare
42
23
23
22
22
3
2 L2 8
D-21
DS-6
T- 4 2S
26 7 8
S q uare
42
23
23
22
22
3
2 L2 8
D - 2 1- N
DS-6
T- 4 8
TEL- E- LEC T
Rect.
42
47
22
21
46
1
------
D-46
D S - 11 /D S - 11A
T- 3 0
TEL- E- LEC T
Rect.
41
29
23
21
27
2
2 8 L3 2/5 F 3 0
D-26
D S - 3 2 /D S - 3 2 A
T- 3 0S
TEL- E- LEC T
Rect.
41
29
23
21
27
2
2 8 L3 2/5 F 3 0
51 2 00 1
D S - 32 A
D IM EN S IO N S IN IN C H ES
(a s abo ve )
N O .PER
B OX
PTI A C C E S S O R Y ITEM S
S= Liner with Molded Step
FORM
#1008-C
TELELECT REV.F
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
TIME / VERSALIFT
base of the liner.
NOTE: All dimensions shown
in chart below refer to the
OUTSIDE of the liner, or
INSIDE of the bucket. All
measurements are rounded to
the nearest half inch.
of the corners.
LINER
SPECIFICATIONS
PT I
M O D EL
#
M FG.' S
CO D E
SH APE
-----------
-----------
-----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
TM- 24
LR10
Rect.
41
40
23
22
39
1
FITALL- II
D- 40FG
DS- 76/DS- 76A
TM- 28
89008- 2/LR5
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28
DS- 8/DS- 8A
TM- 28S
Time/Versalift
Rect.
41
28
22
21
27
2
28L32/5F30
D- 28- N
DS- 8
TM- 39
89008- 5/LR8
Square
39
24
24
23
23
2
2L28
D- 22
DS- 18
TM- 40
89046- 1
K idney
43
55
27
26
54
1
N /A
N /A
DS- 16
TM- 41
89008- 1
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
TM- 41S
Time/Versalift
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
TM- 42
LR3
Square
42
23
23
22
22
3
2L28
D- 21
DS- 6
TM- 42S
Time/Versalift
Square
42
23
23
22
22
3
2L28
D- 21- N
DS- 6
TM- 48
89008- 6/LR9
Rect.
42
47
22
21
46
1
-----
D- 46
DS- 11/DS- 11A
(a s a bove )
N O .P E R
BO X
S= Liner with Molded Step
FORM
#1009-C
TIME/VERSALIFT Rev.F
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
UTILITY BODY
base of the liner.
of the corners.
LINER
nearest half inch.
SPECIFICATIONS
PT I
M O D EL
#
M FG.' S
CO D E
SH APE
-----------
-----------
-----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
UBC*
Utility Body
Square
42
22
22
22
22
2
FITALL- I
D- 20
DS- 3
UB- N C
Utility Body
Square
42
22
22
22
22
2
FITALL- I
D- 20
DS- 3
U- 42
Utility Body
Square
42
23
23
22
22
3
2L28
D- 21
DS- 6
U- 42S
Utility Body
Square
42
23
23
22
22
3
2L28
D- 21- N
DS- 6
liner
rim,
S
=
*.
Liner
Includes
with
Molded
control
cut
N O .P E R
BO X
(a s a bove )
Step
out
in
for
non
cut
rim,
FORM
order
#1010-C
UB-NC
UTIL
BODY Rev.C
Copyright
5/07
2007
BUCKET LINERS
Designed
for
use
on
aerial
lift
bucket
trucks
made
by:
VARIOUS MANUFACTURERS
Aerial Lift \ Dur-A-Lift \ Hunt-Pierce \ Skyworker
base of the liner.
of the corners.
LINER
nearest half inch.
SPECIFICATIONS
PT I
M O D EL #
M FG.' S
CO D E
SH APE
-----------
-----------
-----------
A
B
C
D
E
-----------
LI D S
SCUFF
PAD S
SCUFF PAD S
WI TH STEPS
A- 03
Aerial Lift
Square
39
24
24
22
22
3
2L28
D- 21
DS- 27
AS- 28
Asplundh
Rect.
42
27
22
24
19
3
28L32
D- 30
DS- 30
C - 03
Skyworker
Square
39
24
24
22
22
3
2L28
D- 21
DS- 27
C - 04
Skyworker
Square
39
24
24
2 2 .5
22.5
3
2L28
D- 22
DS- 17
DL- 42
Dur- A- Lift
Square
42
24
24
21
21
4
2L28
D- 20
DS- 1
DL- 42S
Dur- A- Lift
Square
42
24
24
21
21
4
2L28
D- 20- N
DS- 1
U- 59
Hunt Pierce
Square
39
23. 5
23.5
20
20
4
2L28
D- 19
DS- 15
S
=
Liner
with
Molded
N O .P E R
BO X
(a s a bove )
Step
FORM
#1011-C
VARIOUS
MFRS. Rev.D
Copyright
5/07
2007
- SECTION 4 SAFETY EQUIPMENT
Actually, "Safety Equipment" could be the title of our catalog, since all our
products provide safety for linemen. However, this section catalogues peripheral
safety equipment.
Safety is a long term commitment. To assist in that commitment, PTI offers two
new skin protection products. The SPF 30 sunscreen will help protect your skin
against overexposure to ultraviolet radiation. The insect repellent is being
offered in response to customers' requests for help in deterring various insects
that serve as vectors for unpleasant and potentially deadly diseases.
Our lights are designed to be rugged and useful while maintaining an extremely
high safety factor. This is most obvious in the fact that there is no exposed
metal on our lights. All lights have flood and spot. Rechargeable capabilities
and a full range of replacement parts are available in all models.
The Glove Boxes and Blanket Canisters use a polyethylene that is blended to provide the maximum protection from oils and chemicals commonly encountered in the
transportation and storage of the lineman's blankets and gloves. Bright safety
colors are standard. Most models can be shipped UPS/FedEx Ground. Color coding to
fit in to your system is available upon request.
Aerial Safety Light UL-2A
UL-2A Replacement Parts
Lineman's Utility Light UL3
UL3 Replacement Parts
Blanket Canisters
Glove Box / Line Hose Box
Pole Hauling Lights
Wheel Chocks / Outrigger Pads
Line Hose Spreader
Rainbow & Timberwolf Products
Protective Light Base Cover
FORM #3018 5/07
Copyright 2007
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE -03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
SAFETY EQUIPMENT
AERIAL SAFETY LIGHT
Battery Powered
•
Safe - No exposed metal; Insulated light housing is impervious to
corrosion; Impact resistant battery housing constructed of
polyethylene.
•
Light - Dual beam: candle power is 25,000 on high beam, and
3,000 on low beam.
•
Sealed beam - Bulb housing in a thick polymer socket; light is
available with an optional protective bulb shatter guard.
•
Battery - Uses a standard 7.5 volt battery. (Eveready #715 or RayO-Vac #903)
Not included.
•
Switch - A three way switch housed in a neoprene jacket.
•
Bracket - Light will mount anywhere on the bucket rim with a PTI
designed bracket.
•
Positioner - Light swivels and may be aimed in any direction.
•
Rechargeable battery - Option available
•
Rechargeable Battery Port - a port drilled into the light
that makes it possible to recharge the batteries without
having to open the top of the light as in the old
rechargeable UL-2’s.
PT I M O D E L #
D E SC R I PT I O N
UL- 2A
Aerial Safety Light
UL- BUG
Bulb Shatter Guard
UL- BAT
7.5 Volt Battery
UL- RCB- 2A
Rechargeable Battery
UL- CHG- 2A
Battery Recharger
Model #UL-2A
Model #UL-2A sideview
FORM #3019-C Rev.E 5/07
Copyright 2007
SAFETY EQUIPMENT
AERIAL SAFETY LIGHT
Replacement Parts & Accessories
for MODEL #UL-2A
5
â
6
7
8
â
â
â â
à
9
4
à
3
à
2
à
2A
à
2B
DI AGR AM # PTI M ODEL #
D E SC R I PT I O N
1
UL- BCA
Battery Case Assembly
2
UL- BAT
7.5 Volt Battery
2A
UL- RCB- 2A
2B
UL- CHG- 2A
Battery Recharger
3
UL- LDA
Lid Assembly, includes Terminal
Nut Assembly
4
UL- TNA
Terminal Nut Assembly
5
UL- BHA
Bulb Housing Assembly includes
Switch Assembly
UL- SWITCH
Switch Assembly
7
UL- BUL
Bulb Assembly
8
UL- BUG
Optional Bulb Guard Assembly
9
UL- NBS
Bolt and Wing Nut
NA
UL- 2L
Lid only for UL- 2A
Not
6
Shown
1
à
FORM #3020-C Rev.C 5/07
Copyright 2007
SAFETY EQUIPMENT
LINEMAN’S UTILITY LIGHT
PTI’s new UL-3 lineman’s light is proving to be quite an
enhancement to our product line. It consists of a 200,000 candle
power halogen light which is almost 10 times brighter than our
UL-2 model. It uses a 6" diameter reflector with a 6.5 amp hour
battery with built in DC charger. This produces a 1 hour spot and
5 hour flood. It uses a 55 watt H-2 bulb for spot and 12 watt
P-2 for flood. The battery will recharge in 8 hours. The UL-3 is
made from a waterproof construction, all nonconducting
thermoplastic.
With 2 bulbs, if one should burn out, the other will continue
giving a true emergency light. If the glass lens should break, the
shock mounted bulb will survive. The bulbs can easily be changed
without the aid of tools, and are less expensive than one sealed
beam.
The battery is a sealed lead acid, 6.5 amp hour with a recharge
time of 8 hours. It has both 12 volt DC and 120 volt AC
recharging capabilities. The light weighs approximately 9.5 lbs.
The UL-3 has two battery indicator lights on top of the battery
box. The Battery Condition light indicates the battery status
during operation. It glows green during operation and changes to
red when power is low (approximately 25%) and is in need of
charging. The Charging Status light indicates the battery status
when charging. The L.E.D. glows red when charging, then
changes to green when fully charged and is accepting a trickle
charge.
Model #UL-3
UL-3 Includes:
•
Built-in Battery Charger
•
Lead-Acid Rechargeable Battery
PT I M O D E L #
D E SC R I PT I O N
•
115V AC Adaptor
611004
Techlight with handle
•
12V Wire Harness
UL- 3
Lineman's Utility Light
•
For side mounted handle order #611004
UL- 3A
UL- E3
220v 50 cycle light
UL-3A :
UL- BUG- 3 (optional)
Bulb Shatter Guard
•
UL- PC (optional)
12 volt power cord
Same as UL-3, but includes cigarette plug power cord
in place of wire harness
UL-E3 Includes:
•
Built-in Battery Charger
•
Lead-Acid Rechargeable Battery
•
220V, 50 Cycle AC Adapter
•
12V Wire Harness
FORM #3021-C Rev.H 5/07
Copyright 2007
SAFETY EQUIPMENT
UL-3
7
4
3
2
1
5
5A
66
NOTE: Part No.s UL-PC & UL-PPC
Effective 6/8/98 the UL-3 Plugs and recepticle
have been updated. If your light is an older
version contact our Sales Office for update
D I AG R AM #
PT I M O D E L #
D E SC R I PT I O N
1
UL- N BS
Bolt and Wingnut
2
UL- BUL- 3A
S55W H- 2 Bulb, Spot=High
3
UL- BUL- 3B
F12 WP- 2 Bulb, Flood=Low
4
UL- LHB
Light Body
5
UL- CHG- 3
115 Volt Charger
5A
UL- CHG- E3
220V 50Hz European Charger
6
UL- PC
12 Volt Cord w/cig. plug
7
UL- PPC
12 Volt Wire Harness
N O T SHO WN
UL- BUG- 3
O ptional Lens Guard
N O T SHO WN
UL- RCB- 3
Rechargeable Battery*
N O T SHO WN
UL- RLEN S- 3
Replacement Lens
*
Factory Installed
FORM #3022-C Rev.F 5/07
Copyright 2007
SAFETY EQUIPMENT
BLANKET CANISTERS
Various blanket canister models
Model BC-460
•
Mechanical - Protection for blankets at the
warehouse, during transportation, and on the job site.
•
Chemical - Special resilient polyethylene resists a
broad range of chemicals.
•
Ultraviolet - Inhibitor protects from sunlight
degradation.
•
Carries - Up to four blankets in 6" diameter models,
and six blankets in 10" diameter models.
•
Standard - Sizes for 22", 36", 46" and 48" square
blankets.
•
High Visibility - Standard color is safety orange.
Color code system for blankets available.
•
Impervious - Special polyethylene formula is not
affected by hydraulic oils, and motor oils.
•
Weather Protection - Assured with snug fitting end
cap.
•
Custom - sizes are available
Model BC-22Y
Model BC2-48Y
PT I M O D E L #
10" D I AM ETER
PT I M O D E L #
6" D I AM ETER
D E SC R I PT I O N
PT I M O D E L #
5" D I AM ETER
D E SC R I PT I O N
BC- 22O
BC- 22Y
BC- 22G
Holds 22" square
blanket
BC3- 13O
BC3- 13Y
BC3- 13G
BC2- 22O (orange)
BC2- 22Y (yellow)
BC2- 22 G (grey)
5" x 13' long
BC- 36O
BC- 36Y
BC- 36- G
Holds 36" square
blanket
BC3- 25O
BC3- 25Y
BC3- 25G
BC2- 36O
BC2- 36Y
BC2- 36G
5" x 25" long
BC- 46O
BC- 46Y
BC- 46G
Holds 46" square
blanket
BC3- 37O
BC3- 37Y
BC3- 37G
BC2- 46O
BC2- 46Y
BC2- 46G
5" x 37" long
BC2- 48O
BC2- 48Y
BC2- 48G
BC- 48O
BC- 48Y
BC- 48G
Holds 48" square
blanket
FORM #3023-C Rev.D 5/07
Copyright 2007
SAFETY EQUIPMENT
GLOVE BOX / LINE HOSE BOX
Rugged! Weatherproof! Lighter than fiberglass! Virtually immune to cracking
or breaking whether bouncing around in the mail or the back of a pickup!
•
Specially formulated polyethylene sheds oil without absorption!
•
Shaped to shed water, dirt, ice and snow!
•
Shaped flange and optional permanently attached straps assure a
tight seal - protect the dielectric safety of tested gloves from
station to field!
•
Standard color is safety yellow!
•
The GB-20 linehose box is great for shipping and storing 4 foot line
hose. Top cover fastens lightly with webbing straps. Transports
easily with forklift.
•
GB-30 standard color is white.
Accessory Options:
GB-Chest
Spring Loaded chest handles for GB (pair)
GB-Pull
Stationary Pull handles for Glove Box. (pair)
GB-Card
Card Holder
GB-Feet
Fork Feet
GB-Strap
buckles
Set of 2 Poly webbing straps (1") with clamp
GB-Strap-A
Set of 2 straps with polymer buckles
GB-Strap-B
Set of 2 straps with ratchet closure
Line Hose Box - MODEL #GB-20
MODEL #GB-30
*Note: GB-14 is a "Clamshell" construction,
with a 7" Lid on a 7" Deep Tray.
** Nestable - Not Available with GB-Chest
handles
Call for Fork Feet options
FORM #3024-C Rev.E 5/07
Copyright 2007
SAFETY EQUIPMENT
Designedforuseonutilitylinetrucks
POLE HAULING LIGHTS
• Light system that attaches to back end of pole being hauled to work site.
• Battery powered lights are completely independent from truck's electrical system.
Provides safety warning for trailer mounted pole when detached from truck.
• Two lighting modes, constant on (tail light), or flashing (hazard style).
• Bright safety yellow.
• Lights standard color is Red.
(Amber is available at no extra charge, please specifiy when ordering.)
Weatherproof.
Webbing and ratchet mounting system included.
Rugged O-Ring sealed units allow for easy lamp replacement. "Top Hat" style
lamp bezel provides warning to rear and sides of pole.
• Reflective strips provide additional protection.
• Battery powered models use standard lantern batteries.
•
•
•
(6 volt uses Ray-O-Vac #903 or EVEREADY #715)
•
•
•
Model
#611001P
Model
#611002P
Model
#611005P
(12 volt uses Ray-O-Vac #926).
Two Flag Holders.
Vehicle Powered model does not include cable. (Stop, Turn, Tail functions)
Beacon now available (standard beacon color is yellow).
Model #PHL-STTP
PT I M O D E L #
D E SC R I PT I O N
611001P
6 Volt, 3 clearance lights steady hazard
611002P
Stop, Turn, Tail, Velvac Connector
611005P
12 Volt rechargeable, amber beacon
611006P
6 Volt solid red beacon, battery powered
611008P
Pole Hauling Flag Holder
611009P
Stop, Turn, Tail, Amber Beacon
611021P
12 Volt 5 lights, 2 STT, 2 SMC, 1 Amber Beacon
PHL- STTP
Stop, Turn, Tail
PHL- 12
12 Volt battery 2 red lenses steady or hazard mode
PHL- 12A
12 Volt battery 2 amber lenses, steady or hazard mode
611024P
Mid Pole, 12 volt led, battery operated, red beacon
611025P
Mid Pole, 12 volt led, battery operated, amber beacon
611026P
End Pole 6 volt constant red beacon
611027P
End Pole 12 volt flashing, red beacon
PHL- S
12 volt rechargeable battery, red beacon
PHL- S1
12 volt battery operated, amber beacon
Model
#611006P
Model
#611009P
Model#
Approximate Shipping Weight: 20 lbs.
PHL-S1
All pole hauling lights come with 2 flag holders (flags not
included) and web strap binder unless otherwise noted.
* Batteries are customer supplied.
FORM
#
3435-C
03/02 Rev.5/07
Copyright 2007
Model
#PHL-12
SAFETY EQUIPMENT
Wheel Chocks
Prevent Wheel Slippage
FEATURES:
MODEL # WC689
•
Designed to Provide Maximum Gripping Power on
virtually any surface, wet or dry.
•
Resistant to sun, moisture, salt, and oil. Meets OSHA
requirements.
•
Traditional eyebolt for sturdy chain connection.
•
Fabricated of a new, tough, rubber compound,
reinforced for maximum wearability and strength.
•
Jumbo sizes (up to 14" x 14") are available.
•
Designed to fit the curvature of a tire for a strong
grip.
•
Heavy-duty construction for use with heavy utility
trucks and equipment.
M O D EL
D E SC R I PT I O N
H
W
L
WC 689
Wheel C hocks
6
8
9
WC 888
Wheel C hocks
8
8
8
MODEL # WC888
Outrigger Pads
These pads provide solid support to the outriggers and
help prevent damage to pavement. They can be handled
and stowed away without difficulty.
MO DEL
DESCRIPTIO N
DIMEN SIO N S
519003
O utrigger Pad
12 X 12 X 1
519008
O utrigger Pad
18 X 18 X 1
519004
O utrigger Pad
519009
519007
•
Includes your name / logo *
•
Lightweight
•
Strong and Resilient
•
Corrosion resistant
•
Minimum water absorption
•
Shape retention
•
Custom sizes available
•
Square and round shapes
•
Square pads have 45
24 X 24 X 1
•
Rope handles with protective tubing standard
O utrigger Pad
24 X 22 X 1
*
Logo setup charge may apply
O utrigger Pad
36 X 36 X 1
cut on corners
FORM #3099-C Rev. B 5/07
Copyright 2007
SAFETY EQUIPMENT
EEL Spreader
A Field Inspection Device for Insulating Line Hose
Reveals Hidden Damage...Mounts Easily to Utility Vehicle...Prevents Hand Injuries
FEATURES:
•
Until now, there has been no easy way to clean and
inspect the inside of a line hose. This new device reveals
tears, punctures, and cuts inside the line hose - potentially
serious defects that would otherwise go unnoticed.
•
Using the EEL Spreader, utilities can easily meet the
ASTM field care requirements for line hose. They should
be visually inspected - both inside and outside - each day
before use.
•
The device can be set in a vise or attached directly
to a bench. It is constructed of durable, rugged plastic
which is impervious to virtually any oil or detergent.
•
Linehose cleaner and Lubricant is a non-flammable
silicone spray. With high dielectric strength of 22,000
volts it effectively removes rubber bloom oxidation,
carbon, light greases, dirt and light contaminants from
plastics, metals, and rubber goods while protecting against
oxidation and corrosion from moisture and UV
Rays.
MODEL # EEL
MODEL # EEL-2
Feeding a line hose through the tapered EEL spreader is easy (U.S. Patent No. 5,796,032).
M O D EL
D E SC R I PT I O N
FI TS D I AM ETER
WEI G H T
EEL
Linehose Spreader (LG)
1.25" - 1.5"
5lbs.
EEL- 2
Linehose Spreader (SM)
1"
4lbs.
616002
Linehose cleaner and
lubricant (case of 6)
6lbs.
FORM #3097-C Rev.B 5/07
Copyright 2007
SAFETY EQUIPMENT
RAINBOW PRODUCTS
Description:
Industry recommended SPF 30. Can
stay in sun 30 times longer without
burning. Designed for all day
protection from the harmful rays of
the sun. Waterproof, resists sweating,
and moisture. Greaseless formula dries
rapidly and will not affect one’s hand
grip nor, come off on tools and
equipment. Specially formulated for
the Telecom and Utility industries.
One application lasts all day. Tested
safe on Rubber Gloves.
Description:
Effectively removes rubber bloom oxidation, carbon, light greases, dirt, and light
contaminants from plastics, metals, and
rubber goods. The heavy-duty silicone
(6.75%) provides superior penetration and
lubrication for metals, plastics, and rubber
while protecting against oxidation and
corrosion caused by moisture and UV rays.
This unique, non-flammable formula with a
high dielectric strength (22 kV), is an
excellent choice where flammability and
medium to high voltage is a concern. This
non-oil based silicone contains no hexane
and is safe for use on splices and elbows.
Description:
A multi-purpose repellent that repels
gnats, mosquitoes, biting flies, chiggers,
ticks, flying insects, plus fleas on skin
surfaces. Contains extra strength 25%
DEET formula. Prevents unsafe insect
distractions. Stops persistent biting and
piercing insects. Reduces possibility of
Lyme Disease, Rocky Mountain Spotted
Fever, and West Nile Virus. Long-lasting
protection, frequent applications not
necessary. Extra protection formula for
telecom and utility personnel.
R a inbow I t e m #
D e s cr ipt ion
617001
25 Pack of Sunscreen Wipes
617019
100 Pack of Sunscreen Wipes
617002
4oz bottle of Sunscreen
617003
cs/12 4oz bottles Sunscreen
616002
cs/6 Clean & Lube Spray Can
617010
1 can Jungle formula Insect Repellent
TIMBERWOLF
Timber Wolf is a citrus based, biodegradable,
environmentally safe, waterless hand cleaner.
Other products leave your hands dry and gritty,
but not Timber Wolf. Our product contains
no pumice, petroleum, or mineral solvents.
Timber Wolf is pH balanced and contains the
finest moisturizing agents plus aloe vera to
help heal cuts and scratches and skin irritation.
BEN’S
REMOVES
•
•
•
•
•
•
•
FEATURES
fiber optic cable jelly
silicone gel
c-cement
kopper bond
pipe dope
grease & oil
creosote & tar
Timbe r Wolf TM I t e m #
De s cr ipt ion
6 17 0 2 9
8 fl oz bottle Timbe r WolfTM
617030
cs/12 bottles Timbe r WolfTM
** 12 Individually packed wipes
** Easy to Apply - No Mess
** Water based Deet Formula
** Repels Ticks, Mosquitoes, Black Flies, Chiggers, Deer Flies
& other biting insects.
This is a box of 12 individually wrapped wipes. Ben’s Tick &
Insect Repellent Wipes contain 30% DEET formula that is
water based. Easier & faster to apply than sprays or lotions,
Ben’s wipes allow you to control exactly where and how much
repellent you apply to your skin. Ben’s unique water-based
formula insures that the repellent will last longer than alcohol
based repellents that quickly evaporate from your skin.
Ben's Item #
Description
617008
Ben's Insect Repellent Wipes
12 pcs/box
FORM #2063-C 5/07
Copyright 2007
SAFETY EQUIPMENT
PROTECTIVE LIGHT BASE COVER
Discourages Accidental Contact with Live Wires
Non-conductive ... Durable ... UV Resistant
Figure 1
Figure 2
Figure 3
Figure 4
Light Base Hazards
When the plate is removed from a light base, (figure 1) the live wires may pose a
hazard to passersby. The Protective Light Base Cover will help discourage
someone from accidently touching the wires. It will also shield the base from
damage caused by the sun, rain, ice and snow.
model 412002 front view
Light Base without a Pole
The Protective Light Base Cover easily slides over a light base without a pole.
(Figure 2)
Light Base with a Pole
By removing the detachable lid on the top of the Protective Light Base Cover
and unbolting a seam that runs down the length of its side, the cover may be
spread open (figure 3). This allows the Protective Light Base Cover to be
installed, even when a pole is attached to the base. (Figure 4).
General information
PTI’s plastic is a specially blended, non-conductive formula which ensures strong
mechanical properties. The material has UV inhibitors added which retard ultraviolet degradation. It also offers excellent cold weather characteristics as well.
model 412002 inside view
Although the Protective Light Base Cover is constructed from a generally non-conductive material, the mounting hardware may be
conductive; therefore PTI does not conduct any electrical testing on the cover and does not warrantee for dielectric value. It is not meant
to act as an insulating device.
PTI M O D EL #
D E S C R IP T IO N & D IM E N S IO N S
A PPR O X .
S H IP PIN G
W E IG H T
412001
L a rg e P ro te c tiv e L ig h t B a s e C o v e r
B a s e : 2 3 " S Q , To p : 1 7 " S Q ,
P o le D ia : 1 3 ", H t:2 5 "
2 3 lb s .
O ve rs ize d P a c k a ge
412002
S m a ll P ro te c tiv e L ig h t B a s e C o v e r
B a s e : 1 7 " S Q , To p : 1 4 " S Q ,
P o le D ia : 11 ", H t:2 0 "
2 0 lb s .
O ve rs ize d P a c k a ge
FORM #3079-C Rev.B 5/07
Copyright 2007
— SECTION 5 —
SCUFF PADS
PTI scuff pads take a beating so your liner and buckets won't. Extend the
life of the critical insulating component in your aerial lift units.
BD Scuff Pads are for buckets without liners, they provide the same protection for the bucket as our standard scuff pad.
Help prevent injury from slips and falls, line the bottom of buckets and
liners with our "TRU-GRIT" scuff pads.
The "HY-JACKER" aids in reduction of lower lumbar stress.
Scuff Pads - All Models
Fiberglass Scuff Pads
"Tru-Grit" Scuff Pads
BD & BDL Scuff Pads
Ergonomic Safety Grating
Ergonomic Bucket Liner Pads
Hy-Jacker
FORM #3025-C Rev.C 5/07
Copyright 2007
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-0918
SCUFF PADS
PTI M O D EL #
S H APE
FITS PTI LIN ER M O D EL
A ER IAL LIFT M A N UFA CTU R E
DS - 1
S quare
A L- 41 , A L- 41 S ,H - 42 , H- 4 2S , TE- 4 1, TE- 4 1 S , L- 4 1 , L- 41 S ,
TM - 41 , TM - 41 S , RU 41 , RU 41 S , DL- 4 2, D L- 4 2S
DU R- A - LIF T, ALTEC , H O LAN , LIF T- A LL,
TIM E, REAC H - ALL, TEC O
DS - 2
S quare
A - 4 0, A D- 4 0
AS P LU N D H , AERIA L D EV IC ES
DS - 3
S quare
U BC , UB- N C
UTILITY BO D Y
DS - 4
S quare
T- 3 9S , A - 39 S
TEL- E- LEC T
DS - 5
S quare
H-28
HO LA N
DS - 6
S quare
A - 4 7, A - 47 S , M S - 4 7 , M S - 4 7S , P - 4 7, T- 42 , T- 42 S , TM - 4 2,
TM - 42 S , U - 42 , U- 4 2 S , T- 3 9, A - 39 , RO - 4 7, RO - 47 S
ALTEC , M C C A BE, P ITM AN , TIM E TEL- ELEC T, UTILITY BO D Y, RO
DS - 7
6 - sid ed
P-46
P ITM AN
DS - 8
Rectangle
T- 2 8E, A - 28 S , R- 2 8S , T- 28 ES , TE- 28 S , AT- 3 0 S, TM - 2 8,
TM - 28 S , LA -2 8 , LA- 2 8S , H - 88 , H - 88 S
ALTEC , TEC O , HO LA N , HI- RA N G ER,
LIF T- ALL, TEL- E- LEC T, TIM E
DS - 8 A
Rectangle
A - 2 8, R- 2 8 , AT- 3 0, H - 30 , TE- 2 8, T- 28 E
ALTEC , TEC O , HI- RA N GER, H O LAN ,
TEL- E- LEC T, TIM E, LIF T- A LL
DS - 9
Rectangle
AT- 20 , T- 20
AS P LU N D H , TEL- E- LEC T
DS - 1 0
Rectangle
R- 22
HI- RA N GER
DS - 11
Rectangle
TM - 48 , T- 48 , T- 4 8 S , R- 48 , A - 48 , A- 4 8 S , R48 S , TE- 48 , TER8S
ALTEC , H I-RAN G ER, TIM E, TEL- E- LEC T,
TEC O
DS - 11A
Rectangle
TM - 48 , T- 48 , A- 4 8 , R- 48 , TE- 4 8
ALTEC , H I-RAN G ER, TEC O
DS - 1 2
Rectangle
RE- 50 , H- 5 0
REAC H - ALL, H O LA N , TIM E, TEL- E- LEC T
DS - 1 2A
Rectangle
RE- 50 , H5 0
REAC H - ALL, H O LA N
DS - 1 3
Rectangle
LA - 46 , LA - 46 S
LIF T- ALL
DS - 1 3A
Rectangle
LA - 46
LIF T- ALL
DS - 1 4
S quare
R- 24
HI- RA N GER
DS - 1 5
S quare
RU- 5 9, U - 5 9, BU - 5 9
REAC H - ALL, H UN T, BA K ER
DS - 1 6
K id ney
TM - 40
TIM E
DS - 1 7
S quare
C - O 4, H - 38
S K Y W O RK ER, HO LA N
DS - 1 8
S quare
H - 3 9, TM - 39
HO LA N , TIM E
DS - 1 9
Rectangle
R- 38
HI- RA N GER
DS - 2 0
S quare
H-18
HO LA N
DS - 2 1
S quare
M S - 40
M C C A BE
DS - 2 2
S quare
M S - 41
M C C A BE
DS - 2 3
6 - sid ed
M S - 43
M C C A BE
DS - 2 4
Rectangle
P-45
P ITM AN
DS - 2 5
6 - sid ed
A - 4 9, P - 4 9
ALTC , P ITM A N
DS - 2 6
K id ney
P-52
P ITM AN
DS - 2 7
S quare
C - O 3, A - O 3
S K Y W O RK ER
DS - 2 8
K id ney
R- 66
HI- RA N GER
DS - 2 9
K id ney
R- 68
HI- RA N GER
DS - 3 0
Rectangle
S - 3 0, A - 28
S TELC O
DS - 3 1
K id ney
TE- 6 7
TEC O
DS - 3 2
Rectangle
A - 3 0, T- 30
ALTEC , TEL- E- LEC T
DS - 3 2A
Rectangle
A - 3 0, A - 30 S , T- 3 0 , T- 3 0S
ALTEC , TEL- E- LEC T
DS - 3 3
Rectangle
H - 3 0S
HO LA N
DS - 4 4
Rectangle/K id ney
TE- 5 4
TEC O
DS - 7 6
Rectangle
TM - 24
TIM E
DS - 7 6A
Rectangle
TM - 24
TIM E
A= curbside/ passenger side forward
*Available for left (DS7L, DS25L) and right (DS7R, DS25R)
US
PATENT
#4763758
FORM #3027C 5/07
Copyright 2007
SCUFF PADS
FIBERGLASS SCUFF PADS
with a Built-In Step
Model DS-1
•
Designed for use in bucket liners.
•
Molded step for easy exit and added safety.
•
Protects the floor of your liner.
•
"Tru-Grit" surface helps eliminate slipping.
•
High quality fiberglass for strength and longevity.
•
Available in all standard liner configurations.
•
May be used in liners with or without molded step.
Standing in the basket with your back to the
boom.
Note the A# places the step in the upper right
or lower left corner.
Model DS-11
Model DS-8
FORM #3027-C Rev. F 5/07
Copyright 2007
SCUFF PADS
"TRU-GRIT" SCUFF PADS
FOR 1 & 2 MAN BUCKETS
EXCLUSIVE NON-SKID SURFACE!
LONGER BUCKET/LINER LIFE!
GREATER LINEMAN SAFETY!
PTI’s exclusive process suspends thousands of bits of grit in a
molded polyethylene scuff pad. The pad is super smooth on the
outside to protect the bucket and/or liner. Inside, the pad’s gritty
surface provides the lineman with non-skid footing and greater
safety!
MODEL #D-22
PTI’s "TRU-GRIT" pads help avoid the ravages of dirt, cut wires
and other hazards encountered in normal use.
PTI’s "TRU-GRIT" scuff pad series offers a size to fit most
aerial lift bucket liners.
PT I
M O D EL #
SH APE
SI ZE
(L x W x H )
D- 18
Square
18 x 18 x 4
MS- 41
McCABE
D- 19
Square
19 x 19 x 4
RU- 59, U- 59, MS- 40, BU- 59, MS- 39
REACH- ALL, McCABE, BAK ER, HUN T
D- 20
Square
20 x 20 x 4
H- 18, AL- 41, A- 40, H- 42, T- 41, R- 24,
UBC, UBN C, L- 41, RU- 41, TM- 41, DL- 42
HO LAN , ALTEC, ASPLUN DH, HI- RAN GER,
UTILITY BO DY, TIME, LIFTALL, REACHALL,
DURALIFT, TECO
D- 21
Square
21 x 21 x 4
H- 28, P- 47, T- 42, MS- 47, TM- 42, C- 03,
T- 39, A- 47, A- 39, RO - 47, U- 42, A- 03
HO LAN , PITMAN , TIME, ALTEC, TECO ,
TEL- E- LECT, SK YWO RK ER, McCABE, RO ,
UTILITY BO DY, AERIAL LIFT
FI T S PT I L I N E R M O D E L
AER I AL LI FT M AN UFACTUR ER
D- 22*
Square
22 x 22 x 4
H- 38, H- 39, C- 04, TM- 39
HO LAN , SK YWO RK ER, TIME
D- 23
6- Sided
19 x 20 x 4
P- 46, A- 49, P- 49, RO - 49
PITMAN , ALTEC, RO
D- 24
Rectangle
17 x 21 x 4
T- 20, AT- 20
TEL- E- LECT, ASPLUN DH
D- 26
Rectangle
27 x 21 x 4
AT- 30, H- 30, A- 30, T- 30
ALTEC, TEL- E- LECT, HO LAN , ASPLUN DH
D- 28
Rectangle
26 x 20 x 4
R- 28, A- 28, TE- 28, TM- 28, H- 88, LA- 28
T- 28E
HI- RAN GER, ALTEC, TECO , TIME, HO LAN ,
LIFTALL, TEL- E- LECT
D- 30*
Rectangle
23 x 17 x 4
AS- 28, S- 30
ASPLUN DH, STELCO
D- 34
Rectangle
2 1 x 17 x 4
R- 22
HI- RAN GER
D- 38*
Rectangle
33 x 19 x 4
R- 38
HI- RAN GER
D- 40FG*
Rectangle
40 x 22 x 4
TM- 24
TIME
D- 43
6- Sided
20 x 21 x 4
MS- 43
McCABE
HI- RAN GER, REACH- ALL, ALTEC, TIME,
TEL- E- LECT, HO LAN , LIFTALL, TECO
D- 46
Rectangle
44 x 20 x 4
R- 48, RE- 50, A- 48, TE- 48, TM- 48, T- 48,
H- 50, LA- 46
D- 52FG*
K idney
51 x 21 x 4
P - 52
PITMAN
D- 66FG*
K idney
55 x 28 x 4
R- 66
HI- RAN GER
D- 68
K idney
54 x 28 x 3
R- 68
HI- RAN GER
NOTE: Add the Suffix "N" to model number when ordering scuffpad to fit liner with molded in step (For example: D-21-N will fit
PTI liner model A-39S).
Dimensions measured on the outside of scuffpad and rounded off to nearest inch.
*Available in Fiberglass without step
FORM #3028-C Rev.F 5/07
Copyright 2007
SCUFF PADS
Specially designed for Buckets without Liners
BD & BDL SCUFF PADS
The BD Scuff Pad series are made from a special grade of
polyethylene.
It is purposely made a little on the soft side in order to give
better fit.
It is suggested that the scuff pad be removed at weekly intervals and
cleaned out. At the same time the bottom of the bucket should be
cleaned to remove dirt, pieces of wire, etc. This periodic cleaning will
increase the life of your equipment.
BD Scuff Pads feature PTI’s unique method of molding grit throughout
the scuff pad which means that as you wear the surface, more grit is
exposed so the non-skid surface endures.
MODEL BD22
BDL Scuff Pads are natural in color and are molded with heavier
(nominal 5/16") walls than our BD model. They have non-skid traction
bars applied to the inside floor surface. Designed for heavy duty
protection of basket floor when an insulating liner is not used. Unfortunately, BDL's are only available on a limited basis.
PLEASE CALL BEFORE ORDERING.
MODEL BDL-11
PT I M O D E L #
SH APE
AER I AL LI FT M AN UFACTUR ER
BD- 19*
Square
19" x 19" x 4"
McCABE
BD- 20*
Square
20" x 20" x 4"
REACH- ALL, HUN T PIERCE, McCABE, UTILITY BO DY, BAK ER
BD- 21*
Square
21" x 21" x 4"
24 X 24 HI- RAN GER
BD- 22*
Square
22" x 22" x 4"
TEL- E- LECT, ASPLUN DH, HO LAN , TIME
BD- 25*
6- Sided
20" x 21" x 4"
PITMAN (1 MAN )
BD- 33*
Square
23" x 23" x 4"
HO LAN , SK YWO RK ER
BDL- 1
6- Sided
20 1/4" x 19 5/8" x 4"
APPLI CATI O N
BDL- 2
Rectangle
45 3/8" x 21 1/2" x 4"
M UST BE
BDL- 4
Square
22 1/2" x 22 1/2" x 4"
D ETER M I N ED
BDL- 6
Square
21 7/8" x 21 7/8" x 4"
FR O M BUCK ET
BDL- 8
Rectangle
27 1/4" x 21 1/4" x 4"
I N SI D E
BDL- 9
Square
21 1/4" x 21 1/4" x 4"
D I M E N SI O N S
BDL- 10
Square
21 7/8" x 21 7/8" x 4"
M EASUR ED
BDL- 11
Square
21" x 21" x 4"
BDL- 13
Rectangle
34 3/4" x 20 3/4" x 4"
ABO VE
BDL- 15
Square
22 1/4" x 22 1/4" x 4"
FL O O R
BDL- 19
Square
20 3/4" x 20 3/4" x 4"
LEVEL
BDL- 22
Rectangle
24 3/8" x 18 7/8" x 4"
BDL- 27
Square
22 3/4" x 22 3/4" x 4"
* Dimensions measured on outside of scuffpad and rounded off to
nearest inch
3"
FORM #3026-C Rev.C 5/07
Copyright 2007
SCUFF PADS
ERGONOMIC SAFETY
GRATING
EXCLUSIVE "WALK ON AIR SURFACE"! GREATER LINEMANSAFETY!LONGERBUCKET/LINERLIFE!
FEATURES:
•
Hygienically designed to allow free drainage of fluid and
debris.
•
Will not rot, flake, or splinter. Color molded throughout.
•
Available in Blue or Black
•
Two styles to choose from, Air-filled, and Solid gripper tread.
•
Both styles are a bonded grid pattern.
•
Specify any length up to 40'.
•
Widths available are 2', 3' and 4'
•
Sold in 1 Ft. lengths, custom cut to your specs. (Item NonReturnable)
MODELS #198 & 298
- TWO STYLES -
SOLID TREAD
AIRFILLED
•
Lets you "Walk on Air"
•
Forms a flexible surface to stand on to provide cushioning.
•
Standard Color is Blue
•
Has "Tire Like" gripping surface
•
Forms a solid yet flexible surface
•
Standard Color is Blue
PTI M ODEL #
DESCRIPTION
WID TH
198B-
Air filled blue
2'
3'
4'
198L-
Air filled black
2'
3'
4'
298B-
Solid Tread Blue
2'
3'
4'
298L-
Solid Tread Black
2'
3'
4'
Order PTI part# by base number, add width at the - .
IE 198B-3 is Air Filled mat Blue color 3 feet wide by 1 foot long.
Sold by the foot - please specify number of feet when ordering.
FORM #3060-C Rev.E 5/07
Copyright 2007
SCUFF PADS
ERGONOMIC BUCKET LINER PADS
FOR 1 & 2 MAN BUCKETS
EXCLUSIVE NON-SKID SURFACE!
LONGER BUCKET/LINER LIFE!
GREATER LINEMAN SAFETY!
FEATURES:
•
Standard sizes to fit PTI liners and scuff pads.
•
Designed for Ergonomic cushioning without that "Lost
Motion" feel of too-soft pads.
•
Tough non-slip finish.
•
For energized work.
•
Custom Sizes available.
MODEL #EP
•
*Available in soft foam model for extra cushioning add suffix "F" to part numbers below for the foam.
PT I M O D E L #
SHAPE
AER I AL LI FT M ANUFACTUR ER
EP- 18
Square
MS- 41
McCABE
EP- 19
Square
RU- 59, U- 59, MS- 40, BU- 59, MS- 39
REACH- ALL, McCABE, BAKER, HUNT
EP- 20
Square
H- 18, AL- 41, A- 40, H- 42, TE- 41, R- 24, UBC, HOLAN, ALTEC, ASPLUNDH, HI- RANGER, TIME,
UBNC, L- 41, RU- 41, TM- 41, DL- 42
DURALIFT, LIFTALL, UTIL. BODY, REACH- ALL, TECO
EP- 21
Square
H- 28, P- 47, T- 42, MS- 47, TM- 42, C- 03, T- 39, HOLAN, PITMAN, TIME, ALTEC, TECO, TEL- E- LECT,
A- 47, A- 39, RO- 47, U- 42, A- 03
SKYWORKER, McCABE, RO, UTIL. BODY, AERIAL LIFT
EP- 22
Square
H- 38, H- 39, C- 04, TM- 39
HOLAN, SKYWORKER, TIME
EP- 23
6- Sided
P- 46, A- 49, P- 49, RO- 49
PITMAN, ALTEC, RO
EP- 24
Rectangle
T- 20, AT- 20
TEL- E- LECT, ASPLUNDH
EP- 24RA
Round
33" Round Splicer Bucket
ALTEC, TELSTA, TIME
EP- 26
Rectangle
R- 28, TE- 28, A- 28, AT- 30, H- 30, A- 30,
T- 28E, T- 30
HI- RANGER, TECO, ALTEC, ASPLUNDH, HOLAN,
TEL- E- LECT
EP- 30
Rectangle
S- 30, AS- 28
STELCO, ASPLUNDH
EP- 34
Rectangle
R- 22
HI- RANGER
EP- 38
Rectangle
R- 38
HI- RANGER
EP- 43
6- Sided
MS- 43
McCABE
EP- 46
Rectangle
R- 48, RE- 50, A- 48, H- 50, LA- 46, T- 48,
TM- 48, TE- 48
HI- RANGER, REACH- ALL, ALTEC, TIME, LIFTALL,
TEL- E- LECT, TECO, HOLAN
EP- 66
Kidney
R- 66
HI- RANGER
EP- 67
Kidney
TE- 67
TECO
EP- 68
Kidney
R- 68
HI- RANGER
Add suffix D for 1" smaller pad to fit scuffpad (EPD-18)
*Add suffix F for soft Foam model (EPF-18)
Add suffix N for pad to fit Liner with molded in step (EP-21N, EPF-21N, EPD-21N, EPDF-21N)
FORM #3048-C 5/07
Copyright 2007
SCUFF PADS
"HY-JACKER"
SIZE YOUR AERIAL LIFT BUCKET TO THE
CREW THAT USES IT!
A FULL PLATFORM “HY-JACKER” CAN SOLVE
THE BUCKET DEPTH PROBLEM
FOR SHORTER LINEMEN BY ADDING A SAFE 3”
OR 5” BOOST!
•
Adds three or five solid inches to the bottom of a
bucket -- with or without a liner.
•
Rugged polyethylene shell filled with rigid
polyurethane foam for greater strength, longer life.
•
Drops in place quickly, pops out easily.
•
Full bottom for maximum working comfort,
convenience and safety.
•
Use with a "Tru-Grit" scuff pad for extra safe
footing in all kinds of weather.
•
Fits virtually every aerial lift bucket in use today.
•
Complete with traction pads on surface.
MODEL #LS-21 & #L-46
MODEL #L-46
MODEL "L" is 5" HIGH, MODEL "LS" IS 3" HIGH
PT I
M O D EL
SHAPE
D I M E N SI O N S
FI T S PT I L I N E R #
(L x W)
AER I AL LI FT BUCKET M ANUFACTUR ER
L- 19
LS- 19
SQ UARE
19 X 19
R- 24, RU- 59, BU- 59, U- 59
HI- RANGER, REACH- ALL, HUNT PIERCE, BAK ER
L- 20
LS- 20
SQ UARE
2 0 X 20
H- 18, AL- 41, A- 40, UBC
HO LAN , ALTEC, ASPLUNDH, UTILITY BO DY
L- 21
LS- 21
SQ UARE
2 1 X 21
H- 28, TM- 42, C- 03, P- 47,
T- 42, T- 39, A- 39, A- 47
HO LAN, PITMAN, TIME, TEL- E- LECT,
SK YWO RK ER, ALTEC
L- 22
LS- 22
SQ UARE
2 2 X 22
H- 38, H- 39
HO LAN
L- 23
LS- 23
6- SIDED
19 X 20
P - 46
PITMAN
L- 24
LS- 24
RECT.
17 X 21
T- 20, AT- 20
TEL- E- LECT, ASPLUNDH
L- 26
LS- 26
RECT.
26 X 20
AT- 30, H- 30, A- 30
ALTEC, ASPLUNDH, HO LAN
L- 28
LS- 28
RECT.
26 X 20
TE- 28, TM- 28, H- 88, LA- 28 HI- RANGER, ALTEC, TECO , TIME, HO LAN, LIFTA- 28, R- 28, T- 28E
ALL, TEL- E- LECT
L- 34
LS- 34
RECT.
17 X 21
R- 22
HI- RANGER
L- 43
LS- 43
6- SIDED
20 X 21
MS- 43
McCABE
L- 46
LS- 46
RECT.
20 X 44
R- 48, RE- 50, TM- 48, LA- 46 TIME, LIFT- ALL, HI- RANGER, REACH- ALL
*Dimensions measured on the outside of HY-JACKER and rounded off to nearest inch
**Regulatory requirements in some jurisdictions specify a minimum bucket wall height of 42" + 3".
FORM #3029-C Rev.D 5/07
Copyright 2007
— SECTION 6 —
TOOLS & TOOL TRAYS
OPTIONAL ACCESSORIES FOR ALL TOOL TRAYS:
•
•
•
•
7 Pocket Tool Pouch
9 Pocket Tool Pouch
Magnet Bar
•
•
•
Nut-DriverHolder
DifferentBracketSizes
Metal Frame Basket Mounting Available
Knife Pouch
Round Tool Buckets/Canvas Tool Buckets/EEL Line Hose Inspection Tool
Canvas Tool Buckets & Bags
Standard Bucket Hooks
Large Canvas Splicer's Bag
4 Pocket Tool Roll/Hardware Trays
Splicer Seat and Tool Box
Hydraulic Crimping Head Holder
Tool Trays
Intensifier Holder
Tool Trays with Docking Station
Lineman’s Triple Square Wrench
Semi-Oval Poly Tool Tray
Workman’s Platform
CATV Tool Trays
Replacement Parts for Tool Organizers
Inside Mount Tool Tray
Omni Pouch Series
FORM #3030-C Rev.E 5/07
Copyright 2007
TOOLS & TOOL TRAYS
CANVAS TOOL BAGS AND
BUCKETS
•
Canvas Buckets - Canvas buckets are available with a
structural polymer construction.
•
Round - Buckets made with #4 canvas. A solid non-conductive
PVC ring maintains the shape, brass grommets reinforce the
rope holes. The polypropylene rope is offered with a brass
swivel snap.
•
Oval Bucket - Constructed out of #4 canvas. Non-conductive
PVC top ring, side staves completely covered in canvas, solid
bottom. The hook attachments are reinforced with brass
grommets. Two sizes of hooks offered, 2" or 3". *
•
Complete With Hooks - Oval tool buckets include two
Polymer hooks. You choose the size. The 2" hook model
numbers have a -2 suffix, and the 3" hook model numbers have
a -3 suffix. The diameter for both 2" and 3" hooks is 11/16". *
•
Line Hose Bags - constructed of heavy duty canvas or vinyl
nylon, and are offered in a variety of sizes. Please call if your
size is not listed.
LARGE CANVAS SPLICER'S BAG
OUR BIGGEST, MOST VERSATILE BAG YET!
This heavy duty SPLICER'S BAG, constructed of #4 canvas
with a molded bottom will hold more of your tools! It has 17
generous inside pockets, yet is wide enough to carry meters,
boxes of connectors and still get to your tools. The stiff sides
have an additional 13 outside pockets for a total of 30
pockets, allowing you to carry a wide range of material.
Model #310041 with tools
(tools not included)
The two sturdy web handles allow you to carry your tools
anywhere with ease. Two large brass grommets allow you to
hang it off your aerial lift basket when you are aloft. The
ultimate in a portable tool bag!
We recommend using PTI's PVC Bucket -Hooks* (ABH-1 for
buckets with 2" lips, ABH-2 for buckets with 3" lips) to
attached your Splicer's Bag to your bucket. Both will allow you
to hang the Splicer Bag either inside or outside of your aerial
lift basket.
The molded bottom, standard on all PTI canvas bags, is
impervious to moisture and will prevent the bottom from
collapsing, allowing you complete visibility to all of your
tools. We believe this is the best Splicer's Bag on the Market
today! Why not give us a call and find out for yourself.
Model #310041 with tools
(tools not included) using
carrying handles
*S-Hooks sold separately.
FORM
#3031-C
Rev.D
Copyright
5/07
2007
TOOLS & TOOL TRAYS
SPLICER SEAT & TOOLBOX
A new, improved version of an old standard!
Comfortable . . . Large Storage Capacity . . . Lightweight
•
At approximately 10 lbs., this splicer seat & toolbox
is 40% lighter than traditional, wooden models.
•
Molded from durable, impact-resistant plastic, it is
virtually indestructible and impervious to oils, dirt,
grease, and a broad range of chemicals.
•
The SST-10's opening is large enough to stow your
tools inside, but small enough to prevent them from
falling out.
•
The addition of a padded seat and tool pockets will
increase productivity! No longer does the technician
have to rummage for the correct tool. It will be in
plain sight and within easy reach.
•
Both the 212002 and 212003 padded seats & tool
pockets offer:
SST-20 with 212002
A large pocket that holds connectors.
Three tool pockets that store drivers, pliers and
other small hand tools.
A leather knife sheath with screwdriver holder
and quick-release snap.
PT I M O D E L #
D E SC R I PT I O N
APPR O XI M ATE
SH I P. WEI G H T
SST- 10
Splicer Seat Box
12 lbs
SST- 20
Splicer Box with Large O pening
12 lbs
212001
Splicer Box with Bumper Feet
13 lbs
212002
Padded Seat & Tool Pockets
3 lbs
212003
Extra- Padded Seat & Tool Pockets
3 lbs
21 2004
Extra- Padded Seat With Tool
Pockets and Velcro
3 lbs
SST-10 with 212003
Note: Also available with bumper feet. Call
for details.
SST-20
FORM
#2050-C
Rev.E
Copyright
5/07
2007
TOOLS & TOOL TRAYS
A, B, C, and D dimensions correspond to labeled columns in the chart below.
A = Edge to edge under lip
B = Edge to edge under lip
C = Base of tray to bottom of lip
D = Depth of stand off
PT I M O D E L #
D E SC R I PT I O N
A
B
C
D
lbs .
14DTB
Deep Tool Tray
19
7
24
2 .5
15
17
15DTB
Deep Tool Tray with Divider
19
7
24
2 .5
1TB
Shallow Tool Tray/Fits SAM line meters
19
8
8
2. 5
7
1TB- RA
C urved Tool Tray
19
8
8
2. 5
7
1TB- RAW
C urved Tool Tray, White
19
8
8
2. 5
7
1TR- RT
C urved Tool Tray, (fits Telsta)
19
8
8
2. 5
7
1TB- S*
Tool Tray with ABH- 3, S- Hooks
19
8
8
-
7
1TB- SC T**
Soft cover for 1TB, 3TB, C TB
-
-
-
-
2
1TB- W
White Shallow Tool Tray
19
8
8
2. 5
7
1TB- SA*
Tool Tray with ABH- 4 Hooks
19
8
8
-
7
2TB
Double Tool Tray
20
14
8
2.5
10
2TB- O
Double Tool Tray, O range
20
14
8
2.5
10
2TB- W
Double Tool Tray, White
20
14
8
2.5
10
20TB
Shallow Tool Tray, (fits Steel Platform)
19
8
8
2
7
3TB
Shallow Tool Tray for Mounting Inside Bucket
19
8
8
-
7
319013
Long Tool Tray, inside mount, 3 1/2 bracket
25
5
5
-
11
6TB
Tool Tray without Table
15
10
13
2 .5
10
6TB- C
Tool Tray with cutout
15
10
13
2 .5
10
5DTB
Deep Tool Tray
15
7
17
2 .5
9
7DTB
Tool Tray (fits Wavetek and Avantec)
14.25
9.25
17 . 7 5
2 .5
10
8DTB
Tool Tray
15
10
8 .5
2 .5
10
9TB
Toolbox with Tray and Lid
16 . 7 5
9
9
2. 5
6
9 10 0 0 4
Permanent non- conductive fasteners (set of 6)
-
-
1.25
-
-
FO S- RAW
C urved Tool Tray with Table, white
19
8
8
2. 5
7
WMTB
Tool Tray/Table
15
10
13
2 .5
10
318002
WMTB with a hinged lid
15
10
13
2 .5
11
WMTB- 1
Fiber O ptic Splicer Table w/non- skid top
15
10
13
2 .5
10
TBA
Tool Tray Leveling Bar
-
-
-
-
2
N SK - 6
Permanent non- conductive fasteners (set of 6)
-
-
3
-
1
319018
Short Tool Tray, inside mount, 3 1/2" brackets
17
5
5
-
8
319019
Short Tool Tray, inside mount, 2 1/2" brackets
17
5
5
-
8
N SK - 8
Permanent N on- conductive Fasteners (set of 8)
-
-
1/2
-
1
319027
C ompact Tool Tray O utside Mount
14 . 2 5
6.5
8
-
6
319028
C ompact Tool Tray Inside Mount
14.25
6.5
8
-
6
Ladder Rung Tool Support
*See hooks on replacement parts page located later in this section.
** Available in yellow, orange, or white, standard color is black.
NOTE: We will install Omni-Pouches in any tray on this page. We will install Magnetic tool
bars in trays on this page
FORM #3042-C Rev.E 5/07
Copyright 2007
TOOLS & TOOL TRAYS
TOOL TRAYS
Over 25 Different Sizes & Configurations to meet your
everyday needs!
•
Most trays available to fit metal frame baskets.
•
Made from a special grade of rugged high density polyethylene.
•
UV protection added.
•
Trays are cold resistant.
•
Provides a safe and convenient storage space for TOOLS and
CATV meters.
•
Fits virtually every aerial lift basket
•
Custom colors available, call for details.
•
PTI Brackets are designed to mount on buckets with or without
liners.
•
Permanent non-conductive fasteners available, order PTI
model #NSK-6 or NSK-8.
•
Rugged polyethylene is impervious to motor oil, hydraulic oil,
and a broad range of chemicals.
•
The WMTB has a tray/table that will accept splicer units.
•
NEW Compact Inside/Outside Tool Tray
•
1TB-SA has straight backed hooks on the inside of bucket.
•
2TB is twice the width of the 1TB to hold twice as much!
Great for holding lighting components-like Street Lights or
Traffic Lights.
•
Any Tool Tray can be ordered with a divider, Call our Sales
Department for Details.
•
A soft cover is available to fit virtually any size Tray.
•
1TB-RA fits curved baskets with a 30" - 32" diameter such as
1996 and older Altec round splicing buckets, Time/Versalift,
and other round buckets.
•
1TB-RT fits curved Telsta/MTI baskets.
Model #7DTB, 1TB-RAW, 312016, 318018 & 1TB
Model #319027 Compact Tool Tray
ADDAN
UCH
OMNIPO
OR
AR
TTOOLB
E
N
G
MA
Model #WMTB
Form #3035-C Rev.E 5/07
Copyright 2007
TOOLS & TOOL TRAYS
TOOL TRAY WITH DOCKING STATION
Designed to hold virtually any laptop!
DOCKING STATION
• Docking Station fabricated from high quality steel with easy open release
latch to allow computer to be installed and removed easily.
• Dock can be easily moved from aerial lift basket to a cab mount assembly.
• Computer locks into Docking Station with a key to prevent mishaps while aloft.
• Universal design will hold laptops from .8” to 2” thick (with cover open) with a
simple change of optional retaining clips.
• Docking Station swivels and tilts to meet requirements of user and to allow
complete access to tool tray.
• Docking station easily removed when not in use.
Note: Docking Station also available for pen-based/hand held computers.
TOOLTRAY
• Manufactured from rugged high density polyethelene.
• Permanently installed Docking Station bracket allows for
“drop in” installation of all PTI Docking Stations.
• Includes a 7 Pocket Omni Pouch constructed from #4 Grade canvas with brass
grommet reinforced mounting holes and a polymer backing to hold your tools
and organize your workspace.
Standard tool tray is 19”x8”x8” and fits most aerial lift
baskets. Other sizes available.
APPR OX.
SHI PPI NG WT
PT I M O D E L # D E SC R I PT I O N
311002
Please call for details.
Tool Tray w/ Docking Station Bracket
10 lbs
DOCKI NG STATI ONS
319008
Holds Laptops 1.3" to 2" thick*
13 lbs
319009
Holds Laptops 1" to 1.6" thick*
13 lbs
319010
Holds Laptops .8" to 1.4" thick*
13 lbs
319012
Holds Panasonic CF- 27
13 lbs
*Measure with cover open, designed to hold computers in use.
FORM #2101-C Rev.B 5/07
Copyright 2007
TOOLS & TOOL TRAYS
SEMI-OVAL POLY TOOL TRAY
FEATURES:
•
Dimensions 18 x 12 x 10
•
UV Protected
•
Adjustable tool straps
•
Weather resistant
•
Safe and convenient storage for tools and equipment
•
Fits virtually every aerial lift basket
•
Model 319119 (hooks not included)
Made of rugged polyethylene, making it impervious to motor
oil,
hydraulic oil and a broad range of chemicals.
•
Available with hard or soft cover.
This product was designed for Utility workers and
companies who are currently using aerial oval bags. Our
polyethylene Semi-Oval features our exclusive adjustable
tool loops system. The tool loops can be narrowed or
expanded to accommodate a wide range of tools, sockets,
etc. Adjustable tool loops allow every user to set up their
Semi-Oval to meet their personal requirements, allowing
for needs or requirements to change over time. The tray
comes standard with locations for up to 4 hooks to be
utilized, giving the user unparalleled flexibility. We offer
soft and hard covers which help secure the contents of
the Semi-Oval.
Model 319119 (tools and hooks not included)
Model 319119-C closed (hooks not included)
Model 319119-C open (hooks not included)
TOOLS & TOOL TRAYS
CATV TOOL TRAYS
MODEL
#CTB-SH
The CTB Tool Tray has
a Divider and Nut Driver
Holder installed. Any tray
is available with a divider, call our
Sales Department for details. The
nut driver holds five tools.
A separate Nut Driver Holder
with nylon fasteners is available, order model
#CTB-SH.
MODEL #CTB
The 8DTB-C has cutouts that allow the spectrum analyzer
to be strapped in with the shoulder strap. These
slots are in the floor of the tool tray.
The 7DTB-C has an oval opening in the center top side opposite
the brackets, and a drain hole in the floor. This allows
the operator full
access to the
spectrum analyzers
controls.
MODEL
#8DTB-C
The 3TB is designed to be hung on the inside of the bucket. The
stand off
on the bracket has been
removed thus allowing the
tray to be hung on inside
of the bucket.
MODEL #7DTB-C
MODEL #3TB
PTI’s NEW Double Tool
Tray (2TB) is designed
to hold most CATV
monitors.
All trays available to fit
metal frame baskets.
PT I
M O D EL #
D E SC R I PT I O N
A
B
C
D
lbs
CTB
Tool Tray w/Nut Driver Holder & Divider 19
8
8
2.5
8
CTB- SH
Nut Driver Holder for Tool Tray
-
-
-
-
1
CTB- DIV
"CALL FO R DETAILS"
-
-
-
-
1
312004
2TB w/CTB- SH & DIV
20
14
8
2.5
12
6TB- C
Fits HP G4411B Spectrum Analyzer
15
10
13
2. 5
10
8DTB- C
Tool Tray with Cutout
15
10
8.5
2. 5
10
7DTB- C
Tool Tray with Cutout
14.25 9.25
17.75 2.5
10
3TB
Tool Tray for mounting inside bucket
19
8
8
-
8
2TB
Double Tool Tray
20
14
8
2.5
1TB- SCT
Soft Cover for 1TB, 3TB, CTB standard color is black (Yellow and O range
available)
410016
Soft Cover for 2TB, Black
-
FORM #3032-C Rev.D 5/07
Copyright 2007
TOOLS & TOOL TRAYS
INSIDE MOUNT TOOL TRAYS
PTI’s newest tool tray is designed to mount on the inside
of your aerial lift basket. It is long and narrow, to take up
minimal space (only 6.5” wide from lip to lip), but long
enough to accommodate your tools. We have even added
slots to hold up to 6 of your smaller tools along the lip.
The addition of a TP7 Omni Pouch makes this an easily
organized work box.
319013 Long Tool Tray with Optional Magnetic Bar Installed
(tools not included)
•
40% lighter than similar fiberglass models.
•
Made from a special blend of rugged high density
polyethylene which is impervious to motor oils, hydraulic
oils, and a broad range of other chemicals.
•
Tray is cold resistant.
•
PT I M O D E L # D E SC R I PT I O N
A
B
C
D
E
319015
Long Inside Mount Tool Tray
24
11
5.2 5
5 . 25
2. 5
319019
Short Inside Mount Tool Tray
17 . 5
10.5
5 .5
5. 5
2. 5
319014
24
11
5.2 5
5.2 5
3
319020
17.5
10.5
5 .5
5. 5
3
319013
24
11
5.2 5
5.2 5
3. 5
319018
17.5
10.5
5 .5
5 .5
3 .5
Although it is designed to mount on the inside of your basket, outside mounts and
mounts for metal frame baskets are also available. Call us for more information.
NOTE: We will install Omni-Pouches in any tray on this page.
We will install Magnetic tool bars in trays on this page
Form #3200-C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
OMNI-POUCH SERIES
This modular tool system enables
Linemen to customize their work space thereby providing a
comfortable and an ergonomically sound configuration.
•
The handy, versatile tool pouch, which can be attached almost
anywhere and provides easy, rapid access to your tools.
•
With the Omni-Pouch, PTI has combined our canvas bags with our
ruggedpolytooltrays.
•
Constructed from Grade #4 canvas with brass grommet reinforced
mounting holes.
•
Structural polymer backing construction is standard.
•
Provides an organized work storage space for tools in any PTI tool
tray.
•
Omni-Pouch includes mounting hardware and instructions so you
can quickly update your tool tray or tool board.
Model TP-7
You can add 2 or 3 Omni-Pouches to most tool trays.
•
Model TP-9
Model 319017
Can be set up in various configurations - call with your
specifications.
PT I M O D E L #
D E SC R I PT I O N
TP- 7
7 Pocket O mni- Pouch
TP- 9
9 Pocket O mni- Pouch
312005
2TB with one TP7 and one TP9 O mni- Pouch
314001
5DTB with one TP7 O mni- Pouch
319017
Magnet Tool Bar
218025
Basket/Tray Lip Lighting
STANDARD
BUCKET
HOOKS
Made from non-conductive PVC. They are designed to
support the PTI aerial bucket accessories in this section. The
tool trays and canvas bags can be hung inside or outside the
bucket with or without a liner, thus allowing for the wide
variety of work methods in the industry. The hooks are
designed to work on buckets with a 2-inch lip and buckets
with liners with a 3-inch lip. Hooks sold in pairs.
STYLE
STYLE
#ABH
#ABH-2
STYLE
STYLE
#ABH-1
#ABH-14
PT I M O D E L #
D E SC R I PT I O N
ABH
Star Polymer 2"- 3" lip w/ Tie N otches
ABH- 2
11/16 Polymer Hook for 3" lip buckets
ABH- 3
3/4" Polymer Hook
ABH- 4
3/4" Polymer Hook with C ut off for inside mounting
ABH- 12
5/8" S- Shaped Hooks
ABH- 13
3/4" S- SHAPED Hooks
ABH- 14
5/8" N ylon Bucket Hook for 3" lip buckets
ABH- 15
3/4" S- Hooks with Return Bucket Lip
FORM #3088-C Rev.F 5/07
Copyright 2007
TOOLS & TOOL TRAYS
4-POCKET TOOL ROLL
•
Four separate pockets to hold tools. Each pocket measures
5" x 12" x 2.5".
•
Made of white vinyl poly shell — strong, durable,
lightweight, and water repellent.
•
Each pocket closes with velcro fasteners.
•
Rolls up for easy carrying, mounts to buckets with standard
5/8" or 3/4" S-Hooks.
•
Overall size 28" x 14"
•
Wide variety of S-Hooks available.
PT I M O D E L #
D E SC R I PT I O N
TD
4- Pocket Tool Roll (28 x 14) Vinyl Poly
TD- C
4- Pocket Tool Roll (28 x 14) Canvas
MODEL #TD
HARDWARE TRAYS
•
Smaller tray ideal for storing or carrying hardware,
crimps, and connectors.
•
PTI bracket mounts anywhere on bucket rims.
•
Made of rugged high density polyethylene.
•
•
Cold resistant.
•
Permanent non-conductive fasteners available,
order PTI model #NSK-6 or NSK-8.
PTI M ODEL #
D ESCR IPTION
A
B
C
D
HT
Hardware Tray, blk
7.5
4
6
2.5
HT-2
Hardware Tray, blk
7.5
7.5
14
2.5
HT-3
Hardware Tray
7.5
4
16
2.5
MODEL #HT-2
FORM #3115-C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
HYDRAULIC CRIMPING
HEAD HOLDER
Model #CP2
PTI M OD EL #
•
Special material blend is impervious to hydraulic oils.
•
Angle allows for Ergonomic alignment.
•
Ultraviolet inhibitor protects from sunlight degradation.
•
Promotes rapid access to tools.
•
Holds Burndy Y46 Family of Hydraulic Crimp Tools,
Burndy Y750 Family of Revolver Hypress, and Burndy
Y358H Family of Hypress.
•
CP2 is made with vinyl nylon fabric. Base is reinforced
with leatherette and has brass grommets for drainage and
ventilation.
•
Wide variety of S-Hooks available.
D ESCR IPTION
SIZE
APPR OX. SHIP WT.
CHH-17
Crimping Head Holder
4 x 7 x 17
7 lbs
CHH-17A
Crimping Head Holder, Angle
4 x 7 x 17
7 lbs
CP2
Compression Tool & Bold, Cutter Bag
10 x 9 x 19
2 lbs
PCP2
Rigid Compression Tool Holder
5 x 15 x 25
11 lbs
Model #CHH-17A
FORM #3034-C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
INTENSIFIER HOLDER
FOR GREENLEE DYNAPRESS® HYDRAULIC
INSTENSIFIER
•
Securely holds Hydraulic Intensifier on Aerial lift Basket.
•
Specifically designed to hold Greenlee Dynapress® Intensifier,
Series H67 (without handle.)
•
Extended protection above and below unit safeguards hydraulic
couplings from mechanical abuse and shields against brush contact.
•
Special polyethylene formula is not affected by hydraulic oils and
other contaminants.
•
Safely holds intensifier so that it will not become dislodged from
basket in normal use while covering exposed metal and providing
basic level of mechanical shock protection for intensifier unit.
•
Dynapress can be easily removed from carrier for inspection and
maintenance.
PT I M O D EL #
D E S C R IP T IO N
IH 7 1 0 - N H
Inte nsifie r c a rrie r fo r G re e nle e H 6 7 S e rie s
INTENSIFIER HOLDER
FOR GREENLEE FAIRMONT MODEL HB-10
HYDRAULIC INSTENSIFIER
•
Securely holds Hydraulic Intensifier on Aerial Lift Basket.
•
Specifically designed to hold Greenlee Fairmont HB-10 Hydraulic
Intensifier.
•
Available with couplings mounted from side to side (PTI Item
219002) or top and bottom (PTI Item 219003).
•
Extended protection on top and bottom or side to side safeguards
hydraulic couplings from mechanical abuse and shields against
brush contact.
•
Intensifier can easily be removed from carrier for inspection and
maintenance.
•
Safely holds the intensifier so that it will not become dislodged from
basket in normal use while covering exposed metal and providing
basic level of mechanical shock protection for the intensifier unit.
PT I M O D E L #
D E SC R I PT I O N
WEI GHT
2 19 0 0 2
Intensifier Holder for side to side coupling mount
4 lbs
219003
Intensifier Holder for top & bottom coupling mount
4 lbs
FORM #3082-C Rev.B 5/07
Copyright 2007
TOOLS & TOOL TRAYS
LINEMAN’S TRIPLE SQUARE
WRENCH
Simplifies Utility Pole Work!
THREE GOOD REASONS TO USE THE LINEMAN'S
TRIPLE SQUARE WRENCH
• Suspension Bolts
• Lag Bolts
• “C” Clamps
The three most common fasteners on utility poles are Lag
Bolts, “C” Clamps, and Suspension Bolts. They require 1/
5
3
3
2", /8", and /4" bolts, whose nuts and heads measure /4",
1
1", and 1 /8" across the square flats. This SINGLE
WRENCH, with its 3-in-1 Socket, FITS ALL OF THESE
BOLTS. It is constructed to serve trouble-free in the
harsh environment to which lineman are subjected day
after day, season after season.
LW-2 Wrenches
The PTI “Triple Square” and "Double Square"
Ratcheting Lineman’s Wrench are available in two
handle styles, as shown above. PTI Model #LW1-C,
and LW2-C are heavy duty, with an all-cast construction, while Model #LW1-S, and LW2-S have a rugged
stamped steel assembly. Both the LW1 and LW2
handles are a full 12" in length for maximum torque. All
come equipped with the Triple Square Bolt-Thru
Socket, or the Double Square Bolt-thru Socket.
FEATURES
•
LS-1 Replacement Socket
LW2 Socket fits bolt sizes 1" and 1 1/8"
•
Bolt-thru Socket
•
2-in-1 combination socket
•
Reversible Ratchet Handle
•
3-in-1 Combination Socket
•
Heavy Duty Construction
•
Fast Operation
•
Safer
•
Replacement sockets
available
PT I M O D E L #
D E SC R I PT I O N
LW1- C
Triple Square Wrench with C ast Handle
LW1- S
Triple Square Wrench with Stamped Steel Handle
LW2- C
Double Square Wrench with C ast Handle
LW2- S
Double Square Wrench with Stamped Steel Handle
LW1- SO C
Triple Square Replacement Socket (Socket O nly)
LW2- SO C
Double Square Replacement Socket (Socket O nly)
FORM #3033-C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
WORKMAN'S
PLATFORM
Provides an extra lift when
working from the ground.
Stable ... Durable ... Lightweight
•
Lightweight! At 28 lbs., it weighs 35% less than
comparable models.
•
Platform will support up to 600 lbs.
•
Non-skid surface helps prevent slips.
•
Its four large legs provide stability and help prevent
tipping.
•
The platform should be cleaned regularly because dirt
and other contaminants can create a conductive path
on its surface.
•
The Workman's Platform is constructed from a
special blend of polyethylene, which is weather
resistant and impervious to hydraulic oils, pulling gels,
and a broad range of chemicals. While it is molded
from non-conductive material, PTI has not conducted
any electrical testing and does not warrantee for
dielectric value.
APPR O X.
SHI P. WT.
PT I M O D E L #
D E SC R I PT I O N
815001
29" x 23" x 12" Workman's Platform
32 lbs
FORM #3077-C Rev.C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
REPLACEMENT PARTS
Tool Organizers
I LLUST. R EF.
PT I M O D E L #
D E SC R I PT I O N
1
TO - C B
C anvas Pouch w/post screws
2
TO - LB
Leather Pouch w/post screws
3
TO - TH
Tool Holder w/post screws
4
TO - K S
K nife Sheath w/post screws
5
TO - LL1
O ne Leather loop (Large) w/post screws
6
TO - LL2
Two leather loop w/post screws
7
TO - LL3
Three Leather loop w/post screws
8
TO - BIT
13" x 1" Diameter Bit Holder Assembly
9
TO - K S2
Large K nife Sheath w/Post Screws
5
4
6
7
3
9
8
2
1
Miscellaneous Replacement Parts
PT I M O D E L #
D E SC R I PT I O N
N SK - 6
Six N ylon Bolts and N uts
N SK - 8
Eight N ylon Fasteners
DIV
Divider for Poly Tool Tra, Flat Style
C TB- DIV
Divider for Poly Tool Tray, "T" Style
C TB- SH
Screwdriver Holder
TP- 7
7 Pocket Tool pouch w/post and screws
TP- 9
9 Pocket Tool pouch w/post and screws
919001
O range Flag K it
917004
Amber Beacon
Form #3092-C Rev.C 5/07
Copyright 2007
TOOLS & TOOL TRAYS
REPLACEMENT PARTS
Aerial Tool Tray Brackets
Plastic Techniques, Inc. does not supply bracket or nylon nut and bolt assemblies for repair of tool trays. The
weld that bonds the bracket to the tool tray is critical. This must be performed in an inert atmosphere in order to
attain a solid bond.
If the brackets need repair or replacement, Plastic Techniques, Inc. will, for a nominal fee, replace and repair tool
trays and bracket assemblies. Please call the sales office at (603) 645-6800 to arrange for the work to be done.
Aerial Safety Lights
See Light Pages in Sections 4 and 7 of this catalog.
Tru-Fit Replacement Straps
Strap sets are made out of commercial grade, mildew resistant O.D. cotton webbing. All
stitching uses nylon twist thread in a lock stitch. Brass grommets used throughout. All hardware is black anodized. Order ST5/SGL for single man lid, ST5-48/66 for double man lid, ST530/34 for 28L32 and 30L34.
PT I M O D E L #
D E SC R I PT I O N
ST5/SGL
Straps for single man lid
ST5- 30/34
Straps for man and a half lid
ST5- 48/66
Straps for double man lid with Cross Strap
Lineman's Triple Square Wrench
Replacement sockets for Lineman's wrench
PT I M O D E L #
D E SC R I PT I O N
LW1- SO C
Triple square bolt- thru socket for LW1- S, LW1- C
LW2- SO C
Double square bolt- thru socket for LW2- S, LW2- C
Form #3091-C Rev.C 5/07
Copyright 2007
— SECTION 7 —
LIGHTING EQUIPMENT
Click on a Subject or Scroll Down to Browse this Section
Stinger ®
Parts
Streamlight ®
and
Accessories
Rechargeables
Parts
and
Accessories
Stylus , Stylus Reach ™, Keymate , 4AA LED, Septor ™
®
Survivor ®
®
/ Scorpion
Litebox
Litebox Holder / HID Litebox & Holder
Vulcan ® / Handheld Lights
Aerial Work Light UL5
UL3 Work Light
UL3 Parts & Accessories
UL-2A
UL-2A Parts & Accessories
Pole Hauling Lights
Cap Lights 3 & 5 LED
FORM #2015-C 5/07
Copyright 2007
LIGHTING EQUIPMENT
STINGER®
Stinger ® is only 7 3 / 8 inches in length and 10 ounces in weight, but its compact size doesn’t sacrifice power and dependability. Stinger ® can put out a
blinding 15,000 candlepower beam from a Xenon halogen bulb that is more than a
match for much larger lights. It’s always charging and ready for action with
our space-saving, snap-in charger and ready-access switch. With added features
like a variable spot-to-flood beam and LED charge-continuity indicator, no
other light can match the power and features of Stinger ® - the latest in
rechargeables
from
the
leader
in
rechargeables.
Stinger
FEATURES:
®
• One continuous hour of use between
charges
• Anodized inside and out against
corrosion
• Virtually indestructible, roll-resistant
machined aluminum housing
• Just 7 / inches (19.7 cm) long Weighs 10
Stinger ®
MODEL #75000
3
8
•
Spare bulb in the end cap
•
Indestructible roll-resistant housing of
machined aluminum
•
Anodized inside and out against
corrosion
•
Nickel Cadmium battery, for up to 1000
charges and one continuous hour of
use between charges
•
Rugged nylon charger with LED
indicator tells you that Stinger® is
charging
•
Self-cleaning switch
•
Variable spot-to-flood beam
•
Recharges on 110v or 220v AC, or 12v
DC
•
Solid-state circuitry allows you to store
Stinger® in its charger all the time, so
it’s always fully charged and ready to
go.
•
Limited lifetime warranty on the body
and switch.
•
One year warranty on battery and
charger
•
Made in the USA
oz. (292 grams)
PolyStinger™
• One continuous hour of use between
charges
• Virtually indestructible, non-conductive,
roll-resistant, polymer case
• Just 7 / inches (19.7 cm) long Weighs 8.7
oz. (247 grams)
• Tough rubber grip won’t slip, stays
3
PolyStinger™
8
comfortable
PT I M O D E L #
D E SC R I PT I O N
C O LO R
STI NGER R - Compact, sturdy aluminum body. 7 3/8" long, 10 oz., up to 15000 candlepower.
Snap- in charger/holder. Adjustable focus, spare bulb.
7 5 0 14
with AC/DC - 2 holders
75000
light only
POLYSTI NGER TM - Compact, sturdy non- conductive, roll resistant, polymer body. 7 3/8" long,
8.7 ozs., up to 15,000 candle power. Snap- in charger/holder. Adjustable focus, spare bulb.
76514
with AC/DC - 2 holders
black
76502
with DC
black
76000
Light only
yellow
76500
Light only
black
*NOTE: 220v adapters available for International customers only
FORM #2002-C 5/07
Copyright 2007
LIGHTING EQUIPMENT
STREAMLIGHT® RECHARGEABLES
FEATURES:
SL-20X
•
A pre-focused quartz
halogen lamp module
that’s covered by its
own warranty (SL-20XP,
SL-20X, and SL-35X
models)
•
A nickel-cadmium
power cell that takes up
to 1,000 charges
This is the light of choice for law
enforcement agencies around the
country. It is 10 times brighter
than an ordinary flashlight,
packing up to 30,000 pre-focused
candlepower into an aircraft
aluminum case. At 13 inches long,
it weighs less than 2 pounds. Run
time of up to 1.5 hours.
•
Three-position switch
(on/off/blink)
SL-20XP
•
An unbreakable lens
that stands up to any
situation
•
O-ring sealing for
maximum protection
against wet conditions
•
LED charge continuity
indicator
•
Individual serialization
for easy identification
•
Made in the USA
SL-20X
The full-size (13 inch), lighter weight
partner of the SL-20X, delivers up to
25,000 pre-focused candlepower.
Weighing in at only 1 pound, it has
a super-tough polymer case that
carries a lifetime warranty, including
the switch. Wrapped in a non-slip
foam comfort grip, it comes in
yellow, safety orange and nonreflective black. Run time of up
to 85 minutes.
SL-20XP
AC Charge Cords
PTI MODEL #
DESCRIPTION
COLOR
PTI MODEL #
DESCRIPTION
SL-20XP-Super tough polymer body with foam comfort grip. 13" long, up
to 25,000 candlepower. Available in yellow, black or orange.
SL-20X - Indestructible machine tooled aircraft
aluminum body. 13" long, up to 30,000 candlepower.
25041
26010
SL-20XP with AC/DC 2 sleeves
Yellow
25011
Black
25031
Orange
SL-20X with AC/DC 2 sleeves
ST I N G E R ®PTI
D E SC R I PT I O N
M O D EL #
PT I
D E SC R I PT I O N
M O D EL #
22311
110v AC charge cord
25107
22051
12v DC cigarette lighter cord
76956
Lens reflector assembly for POLYSTINGER™
75904
Safety wand, STINGER ®, POLYSTINGER™,
SUPER STINGER ® Yellow
21725
220v AC charge cord
Battery Sticks
75175
Battery stick STINGER
22519
Safety wand, SL- 20XP, SL- 20X, SL- 35X Yellow
Battery stick SL- 15/SL- 20XP (High Capacity)
22511
Safety wand, SL- 20XP, SL- 20X, SL- 35X Red
75914
Bulb STINGER /POLYSTINGER™
7590 5
Holster STINGER
77914
Bulb SUPER STINGER ®
®
Holster
20XP Lamp module
25170
®
DC Charge Cord
Lamp Module
Safety Wands
®
FORM #2006-C 5/07
Copyright 2007
LIGHTING EQUIPMENT
STYLUS REACH™
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Flexible cable extension allows
14 inches of reach
Unbreakable,
100,000
hour
LED that never needs replacing
Run time of up to 60 hours
Momentary “blink”
“on”
switching
or
constant
Waterproof
KEYMATE®
Super-bright 100,000 hour LED
Machined aircraft aluminum
Run time up to 96 hours
Approximately 1 ounce
SEPTOR™
7 LEDS with 3 way lighting
Runtime up to 120 hours
Water-resistant
4AA LED
Class1, Division 1-Approved
7 LEDS
Runtime of 155 hours
Comes with helmet clamps for convenient
hands-free operation.
Dimensions: 1.69"D x 6.38"L
FORM #2065-C 5/07
Copyright 2007
LIGHTING
EQUIPMENT
SURVIVOR ®
Thesafety-approvedflashlightyoucantaketoextremes.
•
Meets Factory Mutual’s stringent requirements for use in Hazardous (Classified) Locations Class I, Division
2 Groups A, B, C, D Temperature Rating T2 and Class II, Division 2 Groups F, G Temperature Rating T4A.
•
NI-CD batteries recharge up to 1,000 times and offer a 1.5 hour run per charge.
•
Lightweight but rugged nylon case is O-ring sealed for water resistance. Rotary switch operates with one
hand. Stainless steel clip allows quick mounting for hands-free use.
•
Removable, rechargeable battery in Division 2 model.
PT I M O D E L #
D E SC R I PT I O N
C O LO R
90001
Sur vivor ® Fa s t C ha r ge M ode l
w/110v AC fa s t cha r ge r
O r a nge
90202
Sur vivor ® Fa s t C ha r ge M ode l
w/12v D C fa s t cha r ge r ciga r e t t e
light e r
Ye llow
90000
St e a dy C ha r ge M ode l
w/C ha r ge r /holde r a nd bot h 110v
a nd 12v D C cor ds
O r a nge
FEATURES:
•
Convenient,cost-effectivecharging.
•
Approved for use in hazardous (classified) locations
•
Hands-free use
Pa r t s a nd Acce s s or ie s for us e wit h St e a dy C ha r ge mode ls
•
22311
Water-resistant
110v AC cha r ge cor d
21725
220v AC cha r ge cor d
220 51
12v D C ciga r e t t e light e r cha r ge cor d
90120
B a t t e r y pa ck a s s e mbly
90030
La mp module
SCORPION™
S c o r p i o n ™, f r o m S t r e a m l i g h t ®, i s t h e b r i g h t e s t , l i g h t e s t , a n d s m a l l e s t p e r s o n a l
light ever developed, with more features than any other miniature light. It
seems puny at only 4.9 inches in length and 4.4 ounces in weight, but Scorpion ™
produces 6,500 peak-beam candlepower from a xenon gas bulb. Using two, powerpacked 3-volt lithium batteries with a 10-year shelf life, Scorpion’s ™ batteries
are so durable you may even trade your car in before you need new ones. No matter how long you wait to use it, Scorpion ™ will still deliver up to one hour of
continuous run-time before new batteries are necessary. That kind of dependability is just what the industry has come to expect from the leader in portable
lighting. And Scorpion ™ includes advancements like a variable focus beam, a rubber-armored sleeve for a sure-grip, and a scratch-proof lens that makes it the
perfect choice for professional or personal use. With added features like a
spare bulb, a virtually indestructible machined-aircraft aluminum body and head,
and O-ring sealing, Scorpion ™ has everything you need in a primary, stand-by, or
back-up flashlight.
FEATURES:
•
•
•
High-pressure
Variable
Xenon
gas
spot-to-flood
bulb
Two
•
Rubber-armored
•
Triple-action
•
Scratch-resistant
•
One
•
Limited
lifetime
•
Made
the
3-volt
hour
in
lithium
PAR TS AN D AC C ESSO R I ES
focus
batteries
sleeve
tail
over
cap
D E SC R I PT I O N
Scorpion™ with lithium batteries
850013
Only 4.9 inches (12.5 centimeters)
length and 4.4 oz. (124.7 grams)
in weight
•
PT I M O D E L #
85001
in
(included)
Black nylon holster
85914
Replacement bulb
85175
Two replacement lithium batteries
provide
machined-aluminum
switch
for
Lens
85905
one-handed
10-year
shelf
life
body
operation
lens
continuous
run-time
warranty
(except
batteries
and
bulb)
USA
LIGHTING
EQUIPMENT
STREAMLIGHT LITEBOX®
THE LITEBOX ® IS AVAILABLE IN THREE MODELS
•
Vehicle System comes complete with vehiclemountable hard-wire rack and carrying strap.
•
Standard System comes with AC and DC chargers.
Its powerful beam is ideal for field maintenance
and inspection of construction sites, utility
lines and remote equipment.
•
Power Failure System comes with AC/DC chargers
and “smart” power failure circuitry that
automatically goes on whenever the power goes
off.
Litebox®
FEATURES:
•
•
•
Litebox® PowerFailure
•
•
•
•
•
•
PT I
M O D EL #
Standardized adjustable swivel neck allows
360o rotation of lamp head
Rubberized impact bumper, lens ring and
cushioned-grip handle for added toughness and
comfort
Can be mounted to Aerial lifts with the LBH
mount.
New twin LEDs give charge feedback (red is
charging, green is fully charged)
Call for information on Dual Beam models.
Full range of charging options: DC (cigarette
lighter), DC direct wire, and AC
High-intensity sealed halogen beam available
in spot or flood, and dual beam options.
Rugged high-impact ABS thermoplastic body is
tightly sealed for wet conditions
Rechargeable up to 500 times
D E SC R I PT I O N
45117/8WS
Yellow
45116/8WS
45113/20WF
45111/20WF
C O LO R
LiteBox® Standard System
includes 110v AC , 12v DC
chargers and mounting rack
PARTS
LBH
LiteBox® mount for Aerial lift baskets
O range
4 5 9 10
20 Watt Flood Lamp
Yellow
22311
110v AC C harge C ord
O range
21725
220v AC C harge C ord
45109/20WS
Yellow
22051
12v DC cigarette charge cord
45110/20WS
O range
45071
Direct Wire (12v) DC
45108/8WS
Yellow
45937
Battery LiteBox®
45107/8WS
45104/20WS
LiteBox® Vehicle System
includes, 12v DC chargers
and mounting rack
45102/20WS
45706/8WS
LiteBox® Vehicle System
Dual Filament/instant backup
45503/8WS
LiteBox® includes shoulder
strap
Yellow
45901
8 Watt Bi- Pin Replacement Lamp
O range
45902
20 Watt Bi- Pin Replacement Lamp
O range
45911
8 Watt Spot Lamp
O range
4 5 9 13
20 Watt Spot Lamp
4 5 9 08
8 Watt Flood Lamp
O range
FORM #2009-C Rev.C 5/07
Copyright 2007
LIGHTING
EQUIPMENT
Designed
for
use
on
aerial
STREAMLIGHT
lift
bucket
trucks
LITEBOX®
HOLDER
•
SAFE – Fully non-conductive wrap-around housing offers maximum protection.
•
Design allows Lighthead to be aimed from 50 degrees below horizontal to 20
degrees past vertical, with nearly a full 360 degrees side-to-side.
•
Allows dual use of your rechargeable lightbox as a bucket mount work light.
•
Constructed of the same quality plastics and durable bracket design you
have come to expect from PTI tool trays and aerial bucket accessories.
•
BRACKET – Light will mount anywhere on the bucket rim with a PTI designed
bracket.
•
LBH2 - For use with lights that have shoulder strap D-Rings
PT I M O D E L #
D E SC R I PT I O N
LBH
Black Light Box holder
LBH- O
Orange Light Box holder
LBH- Y
Yellow Light Box holder
LBH2
For use w/lights w/D- Rings
H.I.D. LITEBOX® AND HOLDER
FEATURES:
•
•
•
•
•
•
One Million Candlepower!
Illuminates objects one mile away
SAFE – Fully non-conductive
wrap-around housing offers
maximum protection.
Fully articulating head can be
aimed precisely at target
Design allows Lighthead to be
aimed from 50 degrees below
horizontal to 20 degrees past
vertical, with nearly a full 360
degrees side-to-side.
Constructed of the same quality
plastics and durable bracket
design you have come to expect
from PTI tool trays and aerial
bucket accessories.
PTI MO DEL #
DESC RIPTIO N
S1017
H.I.D. Light &
Holder C ombo
FORM #2012-C 5/07
Copyright 2007
LIGHTING
EQUIPMENT
VULCAN®
IntroducingrechargeableVulcan®,thelightweight
waterproof lantern that delivers a powerful beam
Model # 44000/6WS
PT I M O D E L #
D E SC R I PT I O N
C O LO R
44000/6WS
Vulcan® standard system, includes
120v AC, 12v DC chargers,
shoulder strap and charging rack
Yellow
22311
120v AC Charge Cord
22051
12v DC cigarette charge cord
PARTS
•
Weight(withBattery)oflessthan3.5pounds
•
ProprietaryHalogensealedbeamwithupto40,000
Beam candlepower.
•
Waterproofto100feet.
•
Virtuallyindestructabledesignwithanengineered
plastichousingthatstillfunctionsaftera20foot
droptest.
•
Runsover31/2hourspercharge.
•
AC/DC rechargeable
•
Electricalswitch(FET)forlonglife
andsparklessoperation.
POWERFUL
HAND HELD LIGHTS
FEATURES:
MODEL #HL-2
MODEL #HL-3
•
1,250,000Candlepower,spotonly,8"Diameter.
•
AircraftAluminumconstructionwithpistolgrip.
•
HeavyDuty16Gauge9'coiledcordforuseincigarettelighter.
•
12 Volt draws 7.8 amps, uses 100 Watt H-1 Bulb.
•
Rubbershockabsorbingringisstandard.
•
Momentaryandstandardswitchesavailable.
•
750,000Candlepower,7"DualStagereflector
•
Momentary rocker switch for spot or flood beam
•
100W H-2 spot bulb draws 7.8amps and 55W H-2 flood bulb draws
4.3amps
•
ConstructedfromimpactresistantPolycarbonate
PT I M O D E L #
D E SC R I PT I O N
HL- 2
1,250,000 candlepower light w/momentary switch
HL- 3
1,250,000 candlepower light w/standard switch
HL- 4
750,000 candlepower light spot/flood w/momentary switch
MODEL #HL-4
FORM #2011-C 5/07
Copyright 2007
LIGHTING EQUIPMENT
AERIAL WORK LIGHT
120 Volt AC
•
Safe - Insulated light housing is impervious to corrosion. Impact
resistant housing is constructed of polyethylene.
•
Light - Beam is defused, or flood, pattern for optimum work space
illumination.
•
Sealed beam - Bulb housing is in a thick rubber socket; light
comes with a protective bulb shatter guard
•
Switch - The switch is housed in a neoprene jacket.
•
Bracket - Light will mount anywhere on the bucket rim with a PTI
designed bracket.
•
Positioner - Light swivels and may be aimed in any direction.
•
Electrical Cord - Rugged 8 foot cord standard. Self coiling and
extra long cord available as options at special request.
MODEL #UL-4
UL-5 WORK LIGHT
Magnet Mount, Dual Beam
The UL-5 is a magnet mounted, dual beam utility light. This light was developed
to answer requests for an extremely rugged 12 volt magnetic work light. The
housing is excessively rugged and impervious to hydraulic and automotive oils.
The material of the light head coupled with the construction of the yoke were
selected for their shock dampening characteristics. The light is a true dual beam,
with two elements. This provides a true emergency light in case of an element
failure. The light provides a nominal 100,000 candlepower beam. The utility light
assembly is secured to the vehicle with a 90 lb magnet. The power cord is a
nominal eight foot utility cable.
MODEL #UL-5
FEATURES:
•
Magnet base 12 Volt Utility Light (UL-5)
•
Magnet base 110 Volt Utility Light
•
Model 712001 is AC powered
•
Dual Beam (flood/Spot) on UL-5
•
Rugged light Head
•
Nominal eight foot power cord
•
Bulb guard standard
•
Battery clips optional
(712001)
MODEL 712001
FORM #3089-C Rev.B 5/07
Copyright 2007
LIGHTING
EQUIPMENT
Designedforuseonaerialliftbuckettrucks
PTI’s new UL-3 lineman’s light is proving to be
quite an enhancement to our product line. It
consists of a 200,000 candle power halogen
light which is almost 10 times brighter than
our UL-2 model. It uses a 6" diameter reflector
with a 6.5 amp hour battery with built in DC
charger. This produces a 1 hour spot and 5 hour
flood. It uses a 55 watt H-2 bulb for spot and
12 watt
P-2 for flood. The battery will recharge in 8
hours. The UL-3 is made from a waterproof construction, all nonconducting thermoplastic.
With 2 bulbs, if one should burn out, the other
will continue giving a true emergency light. If
the glass lens should break, the shock mounted
bulb will survive. The bulbs can easily be
changed without the aid of tools, and are less
expensive than one sealed beam.
The battery is a sealed lead acid, 6.5 amp hour
with a recharge time of 8 hours. It has both 12
volt DC and 120 volt AC recharging capabilities. The light weighs approximately 9.5 lbs.
The UL-3 has two battery indicator lights on
top of the battery box. The Battery Condition
light indicates the battery status during operation. It glows green during operation and
changes to red when power is low (approximately
25%) and is in need of charging. The Charging
Status light indicates the battery status when
charging. The L.E.D. glows red when charging,
then changes to green when fully charged and is
accepting a trickle charge.
UL-3
MODEL #UL-3
Includes:
Built-in Battery
Charger
Lead-Acid Rechargeable
Battery
115V AC Adaptor
12V Wire Harness
For side mounted
handle order #611004
UL-3A :
PT I
M O D EL #
D E SC R I PT I O N
611004
Techlight w/handle
UL- 3
UL- 3A
UL- E3
220v 50 cycle light
UL- BUG- 3
(optional)
Bulb Shatter Guard
UL- PC
(optional)
12v Power C ord
Same as UL-3, but
includes cigarette
plug power cord in
place of wire harness
UL-E3 Includes:
Built-in
Charger
Lead-Acid
Battery
220V, 50
Adapter
12V
Wire
Battery
Rechargeable
Cycle
AC
Harness
FORM #3021-C REV.H 5/07
Copyright 2007
LIGHTING
EQUIPMENT
UL-3
7
4
3
2
1
5
5A
6
PT I M O D E L
#
D E SC R I PT I O N
1
UL- N BS
Bolt & Wingnut
2
UL- BUL- 3A
S55W H- 2 Bulb, Spot=High
3
UL- BUL- 3B
F12 WP- 2 Bulb, Flood=Low
4
UL- LHB
Light Body
5
UL- C HG- 3
115v charger
D I AG R AM #
5A
6
NOTE: Part No.s UL-PC & UL-PPC
Effective6/8/98theUL-3Plugsand
recepticle have been updated. If your
light is an older version contact our
Sales Office for update
7
UL- C HG- E3
220v 50Hz European C hrgr
UL- PC
12v cord w/cigarette plug
UL- PPC
12v wire harness
N O T SHO WN
UL- BUG- 3
O ptional lens guard
N O T SHO WN
UL- RC B- 3
N O T SHO WN
UL- RLEN S- 3
Replacement lens
A
FactoryInstalled
A
FORM #3022-C Rev. E 5/07
Copyright 2007
LIGHTING EQUIPMENT
AERIAL SAFETY LIGHT
Battery Powered
Safe - No exposed metal; Insulated light housing is
impervious to corrosion; Impact resistant battery housing
constructed of polyethylene.
Light - Dual beam: candle power is 25,000 on high beam,
and 3,000 on low beam.
Sealed beam - Bulb housing in a thick polymer socket;
light is available with an optional protective bulb shatter
guard.
Battery - Uses a standard 7.5 volt battery. (Eveready #715
or Ray-O-Vac #903)
Not included.
Switch - A three way switch housed in a neoprene jacket.
Bracket - Light will mount anywhere on the bucket rim
with a PTI designed bracket.
Positioner - Light swivels and may be aimed in any
direction.
Rechargeable battery - Option available
Rechargeable Battery Port - a port drilled into the light
that makes it possible to recharge the batteries without
having to open the top of the light as in the old
rechargeable UL-2’s.
UTILITY LIGHT HEADS
LH-5
This
molded
housing
has
isolate
the
light
heads
MODEL #UL-2A
light
housing
is
designed
for
easy
replacement
of
a
bonded
metal
channel
for
the
mounting
bracket
light
head
and
reduce
vibrations.
This
is
one
of
on
the
market.
the
light.
The
molded
in,
helping
the
most
rugged
LH-8
This
powerful
light
delivers
an
impressive
200,000
+
candlepower
when
set
on
spot.
It
uses
long
life
halogen
bulbs
in
a
reflector
designed
to
develop
a
tight
beam
for
optimal
target
illumination
at
distances
in
excess
of
100
yards.
This
is
coupled
with
a
defuse
flood
pattern
light
all
in
the
same
head.
Both
bulbs
are
shielded
by
tempered
glass
and
an
inch
ring
of
polymer
material
for
impact
protection.
Min. order qty. apply
FORM #3019-C Rev.E 5/07
Copyright 2007
LIGHTING
EQUIPMENT
AERIAL SAFETY LIGHT
for MODEL #UL-2A
5
6
â
7
8
â
â
â â
à
9
4
à
3
à
D I AG R AM
#
PT I
M O D EL #
D E SC R I PT I O N
1
UL- BCA
Battery Case Assembly
2
UL- BAT
7.5 Volt Battery
2A
UL- RCB- 2A Rechargeable Battery
2B
UL- CHG- 2A Battery Recharger
2
à
3
UL- LDA
Lid Assembly, includes
2A
à
4
UL- TNA
5
UL- BHA
Bulb Housing Assembly
includes switch assembly
6
UL- Switch
Switch Assembly
7
UL- BUL
Bulb Assembly
8
UL- BUG
O ptional Bulb Guard Assembly
9
UL- NBS
Bolt and Wing Nut
2B
Not
Shown
1
à
FORM #3020-C Rev.C 5/07
Copyright 2007
SAFETY EQUIPMENT
Designedforuseonutilitylinetrucks
POLE HAULING LIGHTS
• Light system that attaches to back end of pole being hauled to work site.
• Battery powered lights are completely independent from truck's electrical system.
Provides safety warning for trailer mounted pole when detached from truck.
• Two lighting modes, constant on (tail light), or flashing (hazard style).
• Bright safety yellow.
• Lights standard color is Red.
(Amber is available at no extra charge, please specifiy when ordering.)
Weatherproof.
Webbing and ratchet mounting system included.
Rugged O-Ring sealed units allow for easy lamp replacement. "Top Hat" style
lamp bezel provides warning to rear and sides of pole.
• Reflective strips provide additional protection.
• Battery powered models use standard lantern batteries.
•
•
•
(6 volt uses Ray-O-Vac #903 or EVEREADY #715)
•
•
•
Model
#611001P
Model
#611002P
Model
#611005P
(12 volt uses Ray-O-Vac #926).
Two Flag Holders.
Vehicle Powered model does not include cable. (Stop, Turn, Tail functions)
Beacon now available (standard beacon color is yellow).
Model #PHL-STTP
PT I M O D E L #
D E SC R I PT I O N
611001P
6 Volt, 3 clearance lights steady hazard
611002P
Stop, Turn, Tail, Velvac Connector
611005P
12 Volt rechargeable, amber beacon
611006P
6 Volt solid red beacon, battery powered
611008P
Pole Hauling Flag Holder
611009P
Stop, Turn, Tail, Amber Beacon
611021P
12 Volt 5 lights, 2 STT, 2 SMC, 1 Amber Beacon
PHL- STTP
Stop, Turn, Tail
PHL- 12
12 Volt battery 2 red lenses steady or hazard mode
PHL- 12A
12 Volt battery 2 amber lenses, steady or hazard mode
611024P
Mid Pole, 12 volt led, battery operated, red beacon
611025P
Mid Pole, 12 volt led, battery operated, amber beacon
611026P
End Pole 6 volt constant red beacon
611027P
End Pole 12 volt flashing, red beacon
PHL- S
12 volt rechargeable battery, red beacon
PHL- S1
12 volt battery operated, amber beacon
Model
#611006P
Model
#611009P
Model#
PHL-S1
All pole hauling lights come with 2 flag holders (flags not
included) and web strap binder unless otherwise noted.
* Batteries are customer supplied.
FORM
#
3435-C
03/02 Rev.5/07
Copyright 2007
Model
#PHL-12
LIGHTING EQUIPMENT
CAP LIGHTS
3 LED
FEATURES:
•
Longer Battery life and run time than 5 LED model
•
Approximately 70 hours constant on run time
•
Safety mode, light flash to provide warning to
motorists
•
Hands free
•
Light weight, 1 oz with batteries
719003
719003 mounted on
hat (hat not included)
719005
719005 mounted on
hat (hat not included)
Excellent arms reach work area illumination. Centered on
helmet so it does not throw weight off to one side,
equaling less fatigue.
Uses 2- 2032 Lithium coin cell batteries.
5 LED
FEATURES:
•
Battery life uses two 2032 coin cell batteries
•
5 Ultra bright LED's
•
On/Off only, no flashing light
•
Hands free
•
Light weight, 1.3 oz
Excellent arms reach work area illumination. Centered on
helmet so it does not throw weight off to one side.
— SECTION 8 —
BOXES & TRAYS
PTI's Boxes and Trays are composed of special grades of
polyethylene. They are formulated for a long and useful
service life.
ELEMENTS INCLUDE:
•
•
•
•
•
Ultraviolet inhibitor
Impervious to a broad range of chemicals
Unaffected by heavy weight
Incinerates 100%
Custom interior options available, please call.
Click
on
a
Subject
or
Scroll
Down
to
Browse
this
Section
Containment Trays / Containment Vessels
Transformer Maintenance Trays / Utility Boxes
At PTI, extreme durability is built into every tray.
FORM #8000-C
Copyright
5/07
2007
BOXES & TRAYS
CONTAINMENT TRAYS
(TMT-56 & TMT-62)
CONTAINMENT
•
Extra large capacity, TMT-56
approximately 100 gallons of
during repairs or transport.
•
TMT-62
•
Made of rugged durable polyethylene —
lightweight, and easy to clean —
impervious to motor oil, hydraulic oil,
and a broad range of chemicals.
•
Optional drain
specified when
•
Two
holds
built
VESSELS
approximately
in
made
16"
forklift
a
available
in
sizes
to
for
just
needs.
keep
to
but
lift.
about
The
are
moisture
MODEL
PT I
M O D EL #
#TMT-56
D I M E N SI O N S
APPR O X.
CAPACI TY
D E SC R I PT I O N
GB- 15
19" x 19" x 15"
23 gallons
Containment Box with Lid
GB- 30
15" x 30.5" x 12"
23 gallons
Containment Box with Lid
sizes
are
with
The
con-
extremely
also
They
light
can
all
and
be
your
used
storing
fitting
and
Containment
poly-
currently
follow.
tight
are
density
three
boxes
duty
easy
boxes
high
They
tainment
be
tunnels.
containment
from
heavy
gallons.
Boxes
ethylene.
more
120
plug (DP-1) must
ordering tray.
Containment
PTI’s
holds
spillage
dirt
covers
out.
Trays
•
Contains spillage during
or transportation.
•
Easy
•
Lightweight one person.
•
Trays are designed
nestable, easy to
•
Made from rugged
polyethylene.
•
Not
to
repairs
clean.
easily
handled
to be
store.
durable
GB- 20*
56" x 13" x 16"
30 gallons
N estable Containment Box w/Lid
TMT- 19
19" x 19" x 6"
9 gallons
Transformer Maintenance Tray
TMT- 24
2 4 " x 2 4 " x 5"
12 gallons
•
Available
TMT- 48
4 8 " x 3 6 " x 5"
37 gallons
TMT- 56
5 6 " X 4 6 " X 12 "
100 gallons
Containment Tray
•
Optional drain plug available
only at time of tray order.
TMT- 62
6 2 " X 4 8 " X 12 "
120 gallons
Containment Tray
•
Incinerates
DP- 1
*
Not
-
available
with
-
Drain Plug
GB-Chest
handles
affected
in
FORM
by
by
weight.
three
sizes.
100%.
#3041-C REV.D
Copyright
5/07
2007
BOXES & TRAYS
TRANSFORMER MAINTENANCE TRAYS
•
Contains oil spillage (from damaged transformers) during repairs or
transportation.
•
Easy to clean (after being soiled).
•
Lightweight - easily handled by one person.
•
Trays are designed to be nestable, easy to store.
•
Made from rugged durable polyethylene.
•
Not affected by the weight of any pole mounted transformer.
•
Available in three sizes.
•
Optional drain plug (causes minor interference with nesting). Must
be specified when ordering.
•
MODEL #TMT-48
Incinerates 100%.
UTILITY BOXES
PTI’s “NEW” utility boxes are made from a high density polyethylene. They are currently available in three sizes with more sizes
to follow.
The utility boxes are extremely heavy duty but also light and easy to lift. They can be used for just about all your storing needs.
The tight fitting covers keep moisture and dirt out.
MODEL #GB-30
FORM #3005 Rev.C 8/03
Copyright 2003
— SECTION 9 —
ORDERING
INFORMATION
Catalog on Disk
Guarantee
Terms and Conditions
Order Form
Repair Center
Return Policy
Test Procedures
FORM #9002-C
Copyright
5/07
2007
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-
PTI Catalog on CD
Your lineman just put a nail through his bucket liner, and you need to
replace it fast! You reach for your PTI catalog but it’s gone. The
search for the catalog is on. Who was the last person to borrow it?
After an hour of searching you finally track it down only to find the liner section missing.
Does this scenario sound too familiar? Then perhaps you
should consider PTI’s new catalog on CD. If you own an
IBM-PC/compatible or a MAC computer with a CD rom
drive and have Adobe Acrobat Reader installed, then you can have the
PTI catalog at your fingertips. The CD is available free of charge.
Scroll through each page, or quick reference a product through the
Table of Contents. Plans are underway to offer electronic ordering in
the near future.
Call today to order your PTI Catalog on CD!
FORM
#9003-C
5/07
Copyright 2007
P.O. BOX 250 GOFFSTOWN, NEW HAMPSHIRE 03045 TEL. 603-645-6800
Polyethylene Bucket Liner Guarantee
Plastic Techniques Utility Bucket Liners are molded from the best, stabilized, low
density, polyethylene available for this purpose. Each liner is carefully inspected and
dielectrically tested before shipment.
For a period of two years after the date of the guarantee, Plastic Techniques will replace this liner if it will not
withstand a one minute test at the certified test voltage (see below) or if it has a crack or other mechanical damage
resulting from improper molding.
This guarantee shall not cover mechanical damage inflicted by obvious abuse. Nor shall any dielectric parameter
other than voltage be guaranteed.
Defective liners must be shipped to PLASTIC TECHNIQUES, INC., GOFFSTOWN, NH -- Freight Prepaid. Upon
receipt and inspection, a replacement liner will be shipped by us (freight prepaid). Under this guarantee Plastic
Techniques liability shall be limited to replacement of liners. This constitutes the complete guarantee of Plastic
Techniques, Inc., expressed or implied.
GUARANTEE DATE ___________________
50 KV AC RMS
CERTIFIED VOLTAGE _________________
LINER SERIAL NO. ____________________
FORM #1015- F 6/93
N0TE: When returning a defective liner, first write for shipping instructions, giving guarantee date, liner serial number, and reason for
failure. The entire liner must be returned. If broken, all pieces must be included.
9-3
— SECTION 9 —
ORDERING
INFORMATION
Terms and Conditions of Sale
1. AGREEMENT OF SALE. Any terms of Buyer’s purchase order, or any response by Buyer to this acknowledgement which are inconsistent with any terms hereof and are
not specifically accepted are not binding upon Seller. Unless Buyer shall notify in writing to the contrary promptly after Buyer’s receipt of this acknowledgement, acceptance
of the terms and conditions hereof of Buyer shall be conclusively presumed. Seller’s or Buyer’s waiver of any breach or failure to enforce any of the terms and conditions
of this contract shall not in any way affect, limit or waive such party’s right at any time to enforce strict compliance with every condition hereof.
2. PRICE. Seller may, on 10 days’ prior written notice to Buyer, increase the prices indicated on the reverse side hereof to the extent that Seller’s cost of goods ordered
hereunder but not yet shipped may be increased as a result of (a) any order, rules, regulations, guideline or codes issued or promulgated in pursuance of any existing
or future federal, state, or municipal legislation; (b) any increase in the cost of such goods imposed upon Seller by the suppliers of such goods; (c) any controls, restrictions
or charges imposed by governmental authority upon the sale of such goods; or (d) any increase in the cost of manufacturing goods specifically fabricated by Seller. Buyer
may by written notice, delivered to the Seller prior to the effective date of any such price increase, cancel this Contract as it applies to any goods as to the price of which
parties cannot agree. Unless the contract shall be so cancelled, the increased price shall govern thereafter. Seller may, at its option, deliver the material in quantity herein
specified from production points other than that shown, but shall not be obligated to do so, provided that such delivery shall be made at the Contract price.
3. TAXES. Price described on the reverse side hereof shall be subject to any additional charges to cover any existing or future sales, use, excise or similar taxes which Seller
may be required to pay or collect with respect to the goods covered by the Contract. All such taxes shall be for the account of Buyer except as otherwise provided by law.
4. PAYMENTS. If credit has been extended to Buyer (a) payment in full of the invoice price of goods shall be made to Seller within 30 days of Buyer’s receipt of the applicable
invoice, and invoices not paid within such 30 day period shall bear, at Seller’s option, interest at 1.5% per month; and (b) Seller reserves the right to revoke such credit
if Buyer fails timely to pay for any goods previously shipped or service rendered or provided, or, if in the judgement of the Seller, there has been a material adverse change
in Buyer’s financial condition. In either of such events, Seller may demand payment before further shipment of any goods or rendition of any services.
5. SHIPMENT. This is a shipment contract and the Buyer agrees to pay all transportation charges incurred in loading and shipment. If freight or other transportation costs
are increased or if any additional charge or rental fee is required to be paid to manufacturer, then the Seller may add such charge or increase to the Contract price. If Seller
has paid any such charges in advance, Buyer agrees to promptly reimburse Seller on demand. Title to and the risk of loss of goods shall pass to Buyer upon Seller’s delivery
to the shipping carrier whether or not Seller pays all or part of the freight in advance.
6. DELIVERIES. Seller shall not be responsible for failure to make delivery or delays of goods. Seller shall have the right to make delivery in installments, each of which shall
be separately billed and paid for as billed without regard to subsequent deliveries. Each installment of goods deliverable in response to the Buyer’s purchase order shall
be deemed to be sold under a separate Contract. Failure to pay for any installment when due shall excuse Seller from making future deliveries. If Seller’s consent to Buyer’s
reduction of ordered quantities or to cancellation of any open balance of goods on order, the unit price for goods already delivered and for any undelivered goods shall
revert to the specified unit price for the goods actually delivered and accepted.
7. DEFECTIVE GOODS. Specifications for goods are listed in Seller’s literature and all relate to a specific part number. Buyer accepts the responsibility for determining the
suitability of such specifications to its need and ordering by Seller’s part number. Any attempt by Seller’s personnel to determine which Seller’s part number may be suitable
for Buyer’s purpose shall be done solely at Buyer’s risk. The weights, tares, tests and designations so indicated on Seller’s invoice shall govern unless proven to be incorrect.
Buyer shall inspect the goods immediately following their arrival and shall, within 5 business days of such arrival, give written notice to Seller of any claim that the goods
(including quantities thereof) do not conform to the terms of this Contract. If Buyer should fail to give such notice, the goods shipped shall be deemed conclusively to conform
with the terms of this Contract and Buyer shall be bound to pay for the goods. Buyer expressly waives the right that it might have to revoke acceptance after such a 5 day
period. Buyer assumes all risks and use of any goods, including the use of such goods alone or in conjunction with other substances or in the operation of any process,
machinery or equipment. SELLER MAKES NO WARRANTY THAT ANY OF THE GOODS ARE OR WILL BE MERCHANTABLE OR FIT FOR A PARTICULAR PURPOSE.
NEITHER BUYER NOR ANY FUTURE USER OF THE GOODS ARE RELYING UPON ANY REPRESENTATION OR OTHER ASSERTATION BY SELLER WITH
RESPECT TO THE NATURE OR QUALITY OF GOODS BEING SOLD PURSUANT HERETO: NO CLAIM OF ANY KIND AGAINST SELLER, WHETHER AS TO GOODS
DELIVERED OR FOR NONDELIVERY OF GOODS IN RESPECT TO WHICH SUCH CLAIM IS MADE THE PRICE PAID FOR GOODS IN RESPECT WHICH SUCH CLAIM
MADE THE SATISFACTION OF SELLER TO BUYER WITH RESPECT TO THE GOODS SOLD OR SERVICES RENDERED WHETHER BASED UPON CONTRACT
NEGLIGENCE OR OTHERWISE WITH RESPECT TO OR ARISING OUT OF THE DELIVERY AND USE OF SUCH GOODS, SHALL BE GREATER IN AMOUNT THAN
THE NET INVOICE PRICE PAID FOR GOODS IN RESPECT TO WHICH SUCH CLAIM IS MADE. THE SATISFACTION OF ANY SUCH CLAIMS SHALL CONSTITUTE
FULFILLMENT OF ANY AND ALL OBLIGATIONS OF SELLER TO BUYER WITH RESPECT TO THE GOODS SOLD OR SERVICES RENDERED WHETHER BASED
UPON CONTRACT, NEGLIGENCE OR OTHERWISE WITH RESPECT TO, OR ARISING OUT OF THE DELIVERY OF SUCH GOODS. If Buyer’s timely inspections and
notifications to Seller reveal any goods furnished by Seller are defective on account of faulty material or workmanship, Seller shall have the option of replacing such defective
goods free of charge or returning to Buyer the net invoice price previously paid by Buyer for such defective goods. IN NO EVENT SHALL SELLER BE RESPONSIBLE
FOR: (A) THE COST OF ANY WORK DONE BY BUYER ON GOODS FURNISHED HEREUNDER (UNLESS SPECIFICALLY AUTHORIZED BY SELLER), (B) ANY OF
BUYER’S COSTS OR EXPENSES IN TESTING, INSPECTING OR PROCESSING GOODS, ANY LOST PROFITS, INJURY TO GOOD WILL OR ANY OTHER SPECIAL
OR CONSEQUENTIAL DAMAGES.
8. CANCELLATION. Buyer may not cancel its order wholly or in part without Seller’s prior consent, except as specified in paragraph 2 hereof. If Seller consents to such
cancellation Buyer shall be liable for the full sales price of goods shipped prior to cancellation. As to goods shipped at the time of cancellation, Buyer shall pay (i) Seller
reasonable profit plus Seller’s cost of goods, which may not be returned to the supplier for full credit and (ii) all costs of packaging and shipment, plus handling charges
of 20% of the purchase price of shipped goods which may be returned to Shipper for full credit.
9. ASSIGNMENT. Neither this Contract nor any right or obligation hereunder is assignable or transferable to Buyer in whole or in part without the prior written consent of
Seller and any purported assignment shall be void.
10. CONSTRUCTION. This Contract is intended as the final expression of the parties agreement and is the complete and exclusive statement of the terms thereof. No
Statement or agreements, oral or written, made prior to or at the signing hereof, shall vary or modify the written terms hereof; and neither party shall claim any amendment,
modification or release from any provision hereof by reason of a course of action or mutual agreement unless such agreement is in writing signed by the other party and
specifically stating it is an amendment to the Contract. No modification or additions to the Contract shall be affected by the acknowledgement or acceptance by the Seller
of purchase orders, change orders releases, or other documents submitted by the Buyer containing other or different terms or conditions.
11. APPLICABLE LAW. This contract shall be construed and enforced in accordance with the laws of the State of New Hampshire.
NOTE: STANDARD TERMS: net 30 days. A finance charge of 1.5% per month or 18% per annum will be added to all items not paid in 30 days. All accounts are payable in
U.S. dollars. All prepaid shipments will be subject to a handling fee of 10% of the freight charges.
FORM #9013 8/03
Copyright 2003
P.O. BOX 250 ■ GOFFSTOWN, NEW HAMPSHIRE 03045-0250 ■ TEL: 603-645-6800 ■ FAX: 603-623-0918
ORDER FORM
FOR
INTERNAL
USE
ONLY
PTI
ORDER
N O . __________
ORDER
D A T E ______________
CUSTOMER
N O . ___________
SHIP TO:
______________________________________
BILL TO:
_____________________________________
______________________________________
_____________________________________
______________________________________
_____________________________________
______________________________________
_____________________________________
CONTACT & PHONE #:
CUSTOMER PURCHASE ORDER NO:
______________________________________
_____________________________________
SHIPPING: _________________________________________________________________________
o UPS o FEDEX GROUND o MOTOR FREIGHT o BEST WAY o OTHER ___________________________
o COL o PPD Special Instructions: ______________________________________________
REQUESTED DELIVERY DATE: ________________
METHOD OF PAYMENT: o CBS
o COD o CREDIT (Terms: Net 30) Prior Credit Approval Required
TO ENSURE CORRECT SHIPMENT, PTI MODEL # MUST APPEAR ON ALL PURCHASE ORDERS.
UNIT PRICE
TOTAL
QUANTITY
PTI MODEL #
DESCRIPTION
(U.S. Dollars)
(U.S. Dollars)
FORM
24 HOUR FAX ORDER LINE 603-623-0918
#9004-C
Copyright
5/
07
2007
PTI Repair Center
At PTI we don’t just sell great products, we
also service those products beyond the warranty
period.That’sright...evenafteryearsoffielduse
if you damage a PTI product*, then we will repair it
for a nominal fee. So don’t throw away a
repairable accessory, save money and repair it!
Call our Customer Service Department
at603-645-6800fordetails.
Remember each accessory repaired
is one less in our landfills!
*Damaged
bucket
liners
are
not
repairable.
FORM #9014-C
Copyright
5/07
2007
Return Policy
Special notes on returning new products that were shipped in error, do not fit, etc.
1. Before returning any item, you must have approval from the Sales Department of
Plastic Techniques.
2. Arrangements for returning any item as a new product must be made within 1 year
oftheoriginalshipmentdate.
3. Any item for return must bear the stamp containing the PTI name and the test information. We will not accept any PTI products which have had our stamp or label
removed or which have had other stamps, labels or serial numbers printed on them.
4. Our products can be bulky and difficult items to pack for shipment; however, any
product returned to the factory must be completely enclosed in a shipping container
to prevent marring and scratching. We will refuse to accept any returned items that
are improperly packed and have become damaged in transit.
5. Plastic Techniques, Inc. reserves the right to refuse returns on custom made items
(ie.specialcolor,specialcutouts,etc.).Thisdoesnotrefertosituationswherewe
have shipped in error.
6. All items being returned must be shipped freight PREPAID. We will advise you of
proper shipping address when you notify us prior to returning the item.
7. We will issue a CREDIT upon receipt of returned goods at our factory. Return of
some items incurs a restocking fee of 20% (or 30% for 70kv Liners). All credit card
sales subject to a 20% restocking fee. Please see the “Terms and Conditions” sectionofourpricelistformoreinformation.
8. PLEASE CONTACT US IF YOU HAVE ANY FURTHER QUESTIONS. This is our
current return policy which is subject to updates.
FORM #0011-C
Copyright
5/07
2007
PTI Test Procedures
GENERAL CONSIDERATIONS
1. Every liner shipped from PTI receives the standard electrical test of exposure to
50,000 volts, AC-RMS, for one minute on the day of shipment. Liners are unconditionally guaranteed to withstand a similar test for 2 years with the only exception
being physical abuse caused by the user. (We can't help the situation where a
lineman steps in with spikes). Under our guarantee, we replace the liner - full details
areontheguaranteecertificate.
2. PTI also supplies liners tested to 70,000 volts for one minute. Extra voltage testing
requires advance ordering since the liners are slightly heavier. Special manufacturing considerations are also utilized to ensure uniform testing. The 70,000 volts
tested liners are covered by PTI's standard guarantee.
3. Liners should be subjected to a dielectric acceptance test by the utility to guard
against any damage in transit. Re-testing by utilities is done on widely varying arrangements. We are familiar with companies who re-test every month as well as
organizations who do it every two years. What is best, is up to the individual safety
department.
4. All PTI testing is done with AC. To compare an AC test with a DC test, the DC voltage would have to be approximately 2.5 to 3 times the AC voltage. It should also be
noted that PTI measures voltage as RMS. This is equal to approximately 100,000
volts,AC,peak-to-peak.
5. Additional general information on the liners and polyethylene material is printed on
the reverse side of our basket liner data sheets.
6. For further general information on liners, please contact our Sales Department at
(603) 645-6800.
FORM
#9012-C
5/07
Copyright 2007

PLASTIC TECHNIQUES, INC. - Lineman`s Testing Laboratories

Transcription

Similar documents

Carolina Custom Products Spray

The only certainty at the Intermat Trade Fair: MB Shall be the talk of

christmas brochure

Line the bucket with your Bubble Bags, starting

2016 Golf Tournament flyer

Solmax - White Membrane

Materials Guide

highlight of the month

Aerial Photography - Lakes Region Planning Commission

Grecian Pool Liner Form