Line the bucket with your Bubble Bags, starting

In addition to the Bubble Bag kit, you will need ice, water, a spoon
(or a mixing device such as a hand mixer), a tea towel and a bucket
(the size will depend on the kit used).
Note: If you are using an electric mixing device, we
recommend mixing in a separate bucket before pouring
the mixture into your Bubble Bags.
The original Bubble Bag
system offers you eight
layers of industrial
grade filtration, which
will allow you to extract
the essential oils from
almost any plant.
Line the bucket with
your Bubble Bags,
starting with the 25
micron bag and ending
with the 220 micron bag.
Fill the bucket
with enough cold water
to cover the bottom of
the Bubble Bags
(about halfway full).
Add your dry
or frozen plant
trimmings.
Add enough ice to
almost fill your
bucket to the top.
Stir your mix for
15 to 20 minutes,
adding ice if necessary
to keep the water cold.
A 50/50 mix of ice and
water is ideal.
Pull out your
Bubble Bags
one by one,
draining them
into the bucket.
As you pull each
Bubble Bag, turn
it inside out after
it has finished draining
to collect your
herbal extract.
Gently press the
excess moisture
out of your herbal
extract using your
pressing screen
and a dish towel.
For more detailed instructions
check out www.bubblebag.com