assembly instructions paddington 2 door 1 drawer wardrobe

Vendor: S000298
ASSEMBLY INSTRUCTIONS
PADDINGTON 2 DOOR 1 DRAWER WARDROBE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR PADDINGTON 2
DOOR 1 DRAWER WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this wardrobe if any parts are missing, damaged or worn.
DO NOT use this wardrobe unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the wardrobe as this will damage the base.
Always lift the wardrobe with two people to reposition.
Keep any sharp objects away from the wardrobe.
Avoid direct contact with water and sunlight.
www.birlea.com
Page 1 of 7
Vendor: S000298
Parts List
Part Description
1
Left Panel
2
Right Panel
1
1
3
Top Panel
2
1
4
Base Panel
2
1
5
Back Support
2
2
6
Front Rail
2
1
7
Back Rail
2
1
8
Front Plinth
2
1
9
Back Plinth
2
1
10
Top Plinth
2
1
Hardware List (found in box 1)
Part
Description
A
Minifix
B
Minifix Cam
C
30 mm Wooden Dowel
D
Metal Hinges
E
M3.5 x 15 mm CSK Screw
F
Drawer Slide CL/CR
G
Drawer Slide DL/DR
H
M6 x 9 mm Euro Screw
I
M4.7 x 38 mm CSK Screw
J
Hanging Rail
11
Left Door
1
1
K
12
Right Door
1
1
L
Box
1
Qty
1
Qty
18
18
34
6 sets
28
2
2
4
4
1
6
Nail Leg
40
Nail Pin
13
Drawer Front
2
1
14
15
16
17
18
19
Left Drawer Side
Right Drawer Side
Drawer Back
Drawer Support
Back Panel
Drawer Base
2
2
2
2
1
2
1
1
1
1
2
1
M
Allen Key
** You will need a small mallet and a screwdriver for
assembly.
1
Page 2 of 7
Vendor: S000298
Step 1: Insert hardware part C using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Insert hardware part A using a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach hardware part D to the left door (11) and right door (12) using hardware part E and a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 3 of 7
Vendor: S000298
Step 4: Attach hardware part F to the left panel (1) and right panel (2) using hardware part H and a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Join together the front rail (6) and front plinth (8), then the back rail (7) and back plinth (9).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Attach the base panel (4), back supports (5) and top plinth (10) to the left panel (1) using hardware
parts B and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 4 of 7
Vendor: S000298
Step 7: Attach the assembled lower sections using hardware parts B and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8: Attach the right panel (2) using hardware parts B, K and M. Insert hardware part J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Attach the doors (6) then attach the handles (11) using hardware parts H, M and Q with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 5 of 7
Vendor: S000298
Step 10: Attach the back panels (18) using hardware part L and a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 11: Attach the left door (11) and right door (12) using hardware parts D, E and F with a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 12: Assemble the drawer components using hardware parts B, E, I and M with a screwdriver (not
providd).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6 of 7
Vendor: S000298
Step 13: Insert the assembled drawer to the wardrobe.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.
Page 7 of 7