Marshall Multispread

Marshall Multispread
2.5 Tonne Trailer Models
Marshall Multispread has built a strong reputation in Australian Agriculture as the number one selling all-purpose fertiliser spreader with
over 8000 machines in the field.
Constantly evolving over the past 30 years to keep up with the demands of modern farming the 2.5 tonne trailer models are well suited
to smaller farms, vineyards and orchards. Offered in two configurations, Standard 825T or the narrower 825T Horticultural, both models
feature the economically priced 800 series chain/belt feed system.
1
2
3
4
(1) 825T - Standard
The feed system on the 800 Series machines includes a 2ply rubber belt attached to a high grade calibrated 10mm chain and drive sprockets, supported by wear resistant nylon skids ensuring a positive drive. The standard spinner drive is via the tractor PTO (with Hydraulic
spinner drive available as a popular option).
(2) 825T Horticultural
Featuring the 800 Series feed chain system as per the standard 825T, a Hydraulic spinner drive, narrow hopper and wheel track give extra
flexibility in the vineyard and orchard. Optional Side Spread Attachments (shown in photo above) are adjustable to suit different row
widths.
(3) B Type Spinner - Standard on all 2.5 tonne Models.
The B Type spinner configuration has an overall diameter of 600mm, with three vanes and a stainless steel fertiliser chute for optimum
placement of product onto the spinner discs. Spread widths of up to 28m between passes for fertilisers such as Urea, DAP & Superphosphate and up to 12m for non-granulated materials like Lime & Gypsum can be achieved. Minimal adjustment to spinner set-up is required
when changing from granulated to non granulated products. All testing during the development of the B Type spinners was carried out to
Australian Industry standards.
(4) Ground Feed & Application Rates
A V-Belt attached to the wheel hub drives to a 5:1 gearbox and combination of 3 sprocket sets provides an application rate range
between 25kg/ha and 8000kg/ha at any ground speed that suits your paddock conditions. Simple rate charts for popular fertilisers are
provided to minimise calibration time.
Optional Equipment.
Hydraulic Spinner drive (on 825T Standard), Tarpaulin, Hydraulic feed belt drive for heavier application rates.
Model
825T
Nominal Load
Hopper Cubic Volume
825T Horticultural
2500KG
2.2m3
Hopper Feed Type
2.0m3
Chain/Belt
Spinner Type/Size
"B" / 600mm
Spinner Drive - Standard
PTO (1)
Spread Rates - Standard
25kg To 8000kg/hectare (with ground drive)
Spread Widths (*)
Hydraulic
Granulated up to 28m, non-granulated up to 12m
Speed - Paddock Max
25km/hr (loaded)
Speed - Road Max
80km/hr (empty)
Ground Drive Feed
V-belt on wheel hub, 5:1 gearbox, 3 speed (2)
Length - overall
4350mm
4550mm
Width - overall
2170mm
1830mm
Height - overall
1640mm
1620mm
Weight - nett (approx)
1080kg
1100kg
Hopper Length
2240mm
2215mm
Hopper Width
1900mm
1600mm
Track - centre of tyres
1750mm
1620mm
Axle
Tyres
60mm sq/6 stud
400/60 x15.5 12
900 x 16
(*) Allowing for wind conditions, speed and fertilizer consistency.
(1) Available with optional hydraulic spinner drive.
(2) Available with optional hydraulic feed belt drive to suit VRT systems.
Roesner Pty Ltd
PO Box 185
Harvey WA 6220
Freecall 1800 651 288
[email protected] Website www.roesner.com.au