02 Seating Work Chairs

work chairs
AL3 overview
Innovative synchronous mechanism concealed in the chair column integrates premium aesthetics, technology, and
ergonomics to elevate the Executive Chair.


• AL3 Chairs have been designed and tested for users weighing up to 250 lbs.
• AL3 Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could
result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer
for appropriate selection
• Synchro-tilt 3:1 ratio
• Optional Arms Shown

Black Mesh or
Upholstered Back

No Arms or Fixed Arm with Polyurethane
Cap & Optional Leather Upholstery


Frame and Five Star Base in
Polished Aluminum or
Ebony- Coated Aluminum
Upholstered Seat
Discreet and Simple Controls
for Tilt Lock, Tilt Tension
and Seat Height

Seat Height-Adjustment of 4 3/4"
60mm Hard Casters are Standard


Statement of Line


Mesh Back –
Fixed Arms
Upholstered Back –
Fixed Arms
Mesh Back –
Upholstered Fixed Arms



seating price & user guide – February 23, 2015
Upholstered Back –
Upholstered Fixed Arms
Mesh Back –
No Arms
Upholstered Back –
No Arms
work chairs
AL3 dimensions & material requirements
Dimensions
WEIGHT
For Conversion to Metric, multiply dimension by 25.4.
With Arms
Without Arms
50 lbs
47 lbs

Width Between Arms
20 1/4"

Backrest Width
19 3/4"
Angle between Seat and Back
93.2˚-105.8˚
Back Height from Seat
25"
Optional Arm Height from Seat
8 1/4"

Lumbar Apex Height
9"


Seat Height
17"-21 3/4"
Overall Height
42 1/2"-47 1/4"



Seat Depth
17 1/4"
Seat Width
19 3/4"

Overall Depth
28 3/4"
Overall Width
28 3/4"

COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather
yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and
shape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the
next hide.
SINGLE UPHOLSTERED
Complete Chair
Seat only
Back only
Arm Cap (Pair) only
COM
[yards]
COL
[sq. ft]
2
29
2
DUAL UPHOLSTERED
MESH BACK
COM
[yards]
COL
[sq. ft]
COM
[yards]
COL
[sq. ft]
3/4
2
10
19
2
3/4
10



2
seating price & user guide – February 23, 2015

work chairs
AL3 adjustment features & instructions
SEAT HEIGHT ADJUSTMENT
TILT ADJUSTMENT



To raise the chair, slide the grip
bar on the right below the seat
backward while lifting your
weight from the seat until you
reach the desired level, then release
to lock in place. To lower the
chair, slide the grip bar back and
allow your weight to push the seat
down until you reach the desired
level, then release to lock in place.

TILT TENSION ADJUSTMENT




Leaning back, determine if the
resistance of the chair is
comfortable. For less resistance,
press the twist grip below the
front-center of the seat to release it
from the recessed position and
turn it counterclockwise. For
greater resistance, turn the twist
grip clockwise. Once adjusted,
press the twist grip back into the
recessed position.






seating price & user guide – February 23, 2015
To adjust the angle of reclination,
slide the grip bar on the left below
the seat backward once to unlock
and leave the chair in free-flow
mode. Recline to the desired
position and slide the grip bar back
again to lock the chair in place.
work chairs
FEATURES
• Pneumatic Cylinder provides height adjustment of 4 3/4"
• Back tilt can be locked in three positions or left free flow
• Synchro-Tilt 3:1 Ratio
• 3˚ forward tilt
• Tension Control
• Hard casters are standard, unless otherwise specified
• Black mesh back with upholstered seat or fully upholstered style (back and seat in
single or different finishes)
• Frame and five-star base finished in Polished Aluminum or Ebony-Coated
Aluminum
NOTES
Choose Black mesh back with upholstered seat or fully upholstered style (back and seat
in single or different finishes).
For Upholstered Arm (G), when fabric seat is selected, arm will default to black leather,
when Leather seat is selected, arm will default to match selected leather.
Single Upholstered: The same fabric is applied to the seat and inside back.
Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat
and the other fabric to the inside back. First fabric listed will apply to the back and is
the grade of fabric used to price the chair. A dual upholstery upcharge applies.
NALY
AL3 – Synchro-Tilt
Task Chair

Fixed Arms

Upholstered
Fixed Arm

PRODUCT OPTIONS
Style
Upholstery/Back
Style
Back Upholstery
Finish
Seat Upholstery
Finish
Cylinder
Frame & Base
Finish
Casters/Glides
(Optional)
(For Dual)
N No Arms
F Fixed Arms
S Single
Upholstered
Fabric
Fabric
Leather
Leather
1 Standard
52
D Dual Upholstered
G Upholstered Fixed
Arms
M Mesh Back
Ebony
~ Hard Casters
C9 Polished
Aluminum
A Casters, Soft


SAMPLE ORDER CODE
NALY G

D
M501
M502
1
52
C

DESCRIPTION
PRICE
Single Upholstered (S)
No Arms, Mesh Back
No Arms, Upholstered Back
Fixed Arms, Mesh Back
Fixed Arms, Upholstered Back
Upholstered Fixed Arms, Mesh Back
Upholstered Fixed Arms, Upholstered Back
Grade 1
COM/
Grade 2
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
2506
2506
2720
2720
2720
2720
2554
2554
2769
2769
2769
2769
2604
2604
2818
2818
2818
2818
2654
2654
2868
2868
2868
2868
2702
2702
2917
2917
2917
2917
2752
2752
2966
2966
2966
2966
2802
2802
3016
3016
3016
3016
2850
2850
3065
3065
3065
3065
2850
2850
3114
3114
3114
3114
3071
3071
3285
3285
3285
3285
Leather
LA
Leather
LB
Leather
LC
Leather
LD
2757
3048
2971
3262
3002
3285
2787
3136
3002
3350
3039
3388
2879
3403
3094
3617
3150
3672
2910
3492
3125
3706
3186
3767
Single Upholstered (S) (Continued)
No Arms, Mesh Back
No Arms, Upholstered Back
Fixed Arms, Mesh Back
Fixed Arms, Upholstered Back
Upholstered Fixed Arms, Mesh Back
Upholstered Fixed Arms, Upholstered Back
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Polished Aluminum (C9) is specified




add 171
add 18
add 391


seating price & user guide – February 23, 2015
