amicus overview

Transcription

amicus overview
work chairs
amicus overview
Amicus is a streamline design with intuitive user adjustability.

• Amicus Chairs have been designed and tested for users weighing up to 300 lbs
• Amicus Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could
result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer
for appropriate selection
• Amicus Task/Executive Chair with Synchro-Tilt is shown


Outer Back is Plastic

Pivoting 3D Arm Cap
45˚ inwards
15˚ outwards
Lumbar Apex HeightAdjustment of 2 1/4"
(General Use has body fit
contour lumbar support
which is not user adjustable)
Height-Adjustment:
2D: 4"
3D: 3"

Seat Depth Adjustment of 2
1/2" (General Use excepted)
Back Tilt Lock
Standard Seat Height-Adjustment
of 4"

Tension Adjustment

Total Arm Width Adjustment of:
2D: T-Arms 3"
3D: T-Arms 1 1/2"
Five Star Base

2 3/8" (60mm)

Statement of Line


Mid-Back –
No Arms
Mid-Back –
Fixed T-Arms
Mid-Back –
Loop Arms
Mid-Back –
2D T-Arms
Mid-Back –
3D T-Arms
High-Back –
No Arms
High-Back –
Fixed T-Arms
High-Back –
Loop Arms
High-Back –
2D T-Arms


Cantilever Frame –
No Arms

Cantilever Frame –
Integrated Arms
Four-Leg Frame –
No Arms
seating price & user guide – October 24, 2016
Four-Leg Frame –
Integrated Arms
Four-Leg Frame
with Casters –
No Arms
Four Leg Frame
with Casters –
Integrated Arms
High-Back –
3D T-Arms
work chairs
amicus dimensions & material requirements
Dimensions
WEIGHT
For Conversion to Metric, multiply dimension by 25.4.
Task/General Use Mid Back
Task/General Use High Back
43 - 46 lbs
43 - 46 lbs
Width Between Arms
Fixed T-Arm 18 7/8"
Loop Arm 17 3/4"
2D Arm 17 1/2" - 20 1/4"
3D Arm 16 1/4" - 19 1/4"



Backrest Width
Task/General Use 18 1/2"
Back Height from Seat
Task Mid-Back 21"
Task High-Back 24"
Angle between Seat and Back
Task/General Use 97˚-113˚

Seat Height
Task Standard 16 1/2"-20 1/2"
Task Low 15"-18"
Task High 17 3/4"-22 3/4"
Lumbar Apex Height
Task 7"-11"
General Use 8 1/2"
Overall Height (Standard Cylinder)
Task Mid-Back 38"- 42"
Task High-Back 41"- 45"
Arm Height from Seat
Fixed T-Arm 8 1/2"
Loop Arm 9"
2D Arm 7 1/2"-11 1/2"
3D Arm 7 3/4"-10 3/4"




Seat Depth
Task 15" 1/2"-18"
General Use 16 3/4"
Seat Width
Task/General Use 17 3/4"

Overall Depth
Task/General Use 30"
Overall Width
Task/General Use 30"

COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield
varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape
of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next
hide.
SINGLE UPHOLSTERED
Mid-Back
High-Back
DUAL UPHOLSTERED – SEAT
DUAL UPHOLSTERED – BACK
COM
[yards]
COL
[sq. ft]
COM
[yards]
COL
[sq. ft]
COM
[yards]
COL
[sq. ft]
1 1/2
1 3/4
15
20
1
1
8 1/2
8 1/2
1
1 1/4
10
12
seating price & user guide – October 24, 2016




work chairs
amicus dimensions & material requirements (continued)
Dimensions
WEIGHT
For Conversion to Metric, multiply dimension by 25.4.
Guest Cantilever
Guest Four-Leg


20 lbs
20 lbs
Backrest Width
19"
Cantilever

Seat Height
Guest Four-Leg 17"
Guest Cantilever 18"

Back Height from Seat
15 1/2"

Arm Height from Floor 25 3/4"
Angle between Seat and Back
97˚
Lumbar Apex Height
General Use 9"
Overall Height (Standard Cylinder)
31"

Arm Height from Seat
8"


Seat Depth
17 1/4"
Seat Width
20 1/4"

Overall Depth
22"
Overall Width
24"

COM/COL Material Requirement




More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield
varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape
of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next
hide.
SINGLE UPHOLSTERED
Guest Chairs Seat only
Guest Chairs Seat and Back
DUAL UPHOLSTERED – SEAT
DUAL UPHOLSTERED – BACK
COM
[yards]
COL
[sq. ft]
COM
[yards]
COL
[sq. ft]
COM
[yards]
COL
[sq. ft]
1
1
8 1/2
10 1/2
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
seating price & user guide – October 24, 2016
work chairs
amicus adjustment features & instructions
SEAT HEIGHT ADJUSTMENT
SEAT DEPTH ADJUSTMENT

To raise the chair, lift the lever up
while lifting your weight from the
seat until you reach the desired
level, then release to lock in place.
To lower the chair, lift the lever up
and allow your weight to push the
seat down until you reach the
desired level, then release to lock
in place.
To adjust the seat depth, push the
lever down and simultaneously lift
your weight from the seat while
sliding the seat forward or
backward. Release the lever to lock
the seat in place. Not available on
Amicus General Use Chairs.



LUMBAR HEIGHT ADJUSTMENT
BACK TILT LOCK ADJUSTMENT


To adjust the lumbar height, grasp
both levers and slide them up or
down to the desired position.
Not available on Amicus General
Use Chairs.
To adjust the angle of reclination,
pull the lever up to unlock the back
and leave the chair in free-flow
mode. Recline to the desired
position and push the lever down
to lock the back in place.



TILT TENSION ADJUSTMENT
ARM WIDTH ADJUSTMENT

Leaning back, determine if the
resistance of the chair is
comfortable. For less resistance,
pull tension adjustment lever out
and turn it counterclockwise. For
greater resistance, turn the
lever clockwise.
To adjust the width of each arm,
push the lever down to release the
arm lock. Slide the arm inward or
outward to the desired position.
Push the lever up to lock the arm
in place.



seating price & user guide – October 24, 2016

work chairs
amicus adjustment features & instructions (continued)
2D ARM HEIGHT ADJUSTMENT
3D ARM ADJUSTMENT


To adjust the arm height, lift the
button under the arm cap to raise
or lower it to the desired position.
Release the button to lock in place.


3D ARM PIVOT ADJUSTMENT



To pivot the arm cap, grasp and
rotate inward or outward to the
desired position.







seating price & user guide – October 24, 2016
To adjust the arm height, press the
top half of the button in and raise
or lower it to the desired position.
Release the button to lock in place.














work chairs
FEATURES
• Standard pneumatic cylinder provides height adjustment of 4"
• Back tilt can be locked in five positions or left free flow
• Frame, outer back and five star base are plastic
• Synchro-tilt 2.7:1 ratio
• Tension control
• Seat depth adjustment of 2-1/2"
• Lumbar height adjustment of 4"
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete, or tile
NOTES
Single Upholstered: The same fabric is applied to the seat and inside back.
Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat
and the other fabric to the inside back. First fabric listed will apply to the back and is the
grade of fabric used to price the chair. A dual upholstery upcharge applies.
NACX
Amicus – Synchro-Tilt
Task Chair

Loop-Arm
3D Arm
Fixed T-Arm
2D Arm


PRODUCT OPTIONS
Size
F Mid-Back

H High-Back
Mechanism
Style
1 Standard
SynchroTilt (with
seat slider)
Arm Style
N No Arms
F Fixed T-Arms
L Fixed Loop Arms
Upholstery Style Back Upholstery
Finish
S Single
Upholstered

Frame & Base
Finish
E Ebony
Casters/Glides
(Optional)
Fabric
1 Standard
Leather
2 High
B Glides, Hard
3 Low
C Glides, Soft
D Dual
Upholstered
W 2D Width- &
Height-Adjustable
T-Arms
Cylinder Style
A Casters, Soft
Seat Upholstery
Finish
P 3D Width- &
Height-Adjustable
T-Arms with Pivot
(For Dual)
Fabric
Leather

SAMPLE ORDER CODE
NACX H
1
L
S
M501 M502
1
E

DESCRIPTION
PRICE

MID-BACK (F)
Grade 1

No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
MID-BACK (F) (Continued)


No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Hard Glides (B) are specified
If Soft Glides (C) are specified
COM/
Grade 2
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
814
904
937
924
970
853
943
975
965
1008
890
980
1012
1002
1046
928
1018
1052
1040
1085
968
1058
1090
1078
1123
1006
1096
1129
1118
1162
1043
1133
1166
1155
1200
1083
1173
1205
1194
1238
1121
1211
1244
1232
1277
1254
1344
1377
1366
1411
Leather
LA
Leather
LB
Leather
LC
Leather
LD
1165
1255
1288
1277
1322
1304
1394
1426
1415
1460
1350
1440
1472
1461
1506
1120
1210
1242
1231
1276
add
add
add
add
171
18
18
29
Pricing is continued on the following pages.



seating price & user guide – October 24, 2016
work chairs
NACX
Amicus – Synchro-Tilt
Task Chair (Continued)
DESCRIPTION
PRICE
HIGH-BACK (H)
Grade 1
COM/
Grade 2
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
919
1009
1041
1031
1075
965
1054
1086
1075
1120
1009
1099
1132
1121
1165
1054
1144
1176
1165
1210
1098
1188
1221
1210
1254
1143
1233
1265
1254
1299
1189
1279
1311
1300
1344
1233
1323
1356
1344
1389
1278
1368
1400
1389
1433
1433
1524
1557
1544
1590
Leather
LB
Leather
LC
Leather
LD
1377
1467
1500
1488
1533
1560
1650
1683
1672
1716
1621
1711
1744
1733
1777
Leather
LA
HIGH-BACK (H) (Continued)
No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Hard Glides (B) are specified
If Soft Glides (C) are specified
1315
1406
1439
1427
1472
add
add
add
add




171
18
18
29









seating price & user guide – October 24, 2016

work chairs
FEATURES
• Standard pneumatic cylinder provides height adjustment of 4"
• Back tilt can be locked in five positions or left free flow
• Frame, outer back and five star base are plastic
• Synchro-tilt 2.7:1 ratio
• Tension control
• Seat depth adjustment of 2-1/2"
• Lumbar height adjustment of 4"
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete, or tile
NOTES
Single Upholstered: The same fabric is applied to the seat and inside back.
Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat
and the other fabric to the inside back. First fabric listed will apply to the back and is the
grade of fabric used to price the chair. A dual upholstery upcharge applies.
NACXJ
Amicus – Synchro-Tilt
Task Chair (CAL-TB133)

Loop-Arm
3D Arm
Fixed T-Arm
2D Arm


PRODUCT OPTIONS
Size
F Mid-Back

H High-Back
Mechanism
Style
1 Standard
SynchroTilt (with
seat slider)
Arm Style
N No Arms
F Fixed T-Arms
L Fixed Loop Arms
Upholstery Style Back Upholstery
Finish
S Single
Upholstered
D Dual
Upholstered
W 2D Width- &
Height-Adjustable
T-Arms

Fabric
Cylinder Style
1 Standard
Frame & Base
Finish
E Ebony
Casters/Glides
(Optional)
A Casters, Soft
2 High
B Glides, Hard
3 Low
C Glides, Soft
Seat Upholstery
Finish
P 3D Width- &
Height-Adjustable
T-Arms with Pivot
(For Dual)
Fabric

SAMPLE ORDER CODE
NACXJ H
1
L
S
M501 M502
1
E



DESCRIPTION
PRICE
MID-BACK (F)
Grade 1
Grade 2
Grade 3
No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
980
1070
1103
1092
1136
1019
1110
1142
1131
1175
1058
1147
1180
1169
1214
1086
1176
1208
1197
1243
1131
1221
1253
1243
1287
1176
1266
1299
1288
1333
HIGH-BACK (H)


No Arms
Fixed T-Arms
Fixed Loop Arms
2D Width- & Height-Adjustable T-Arms
3D Width- & Height-Adjustable T-Arms
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Hard Glides (B) are specified
If Soft Glides (C) are specified
add
add
add
add
171
18
18
29


CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

seating price & user guide – October 24, 2016
work chairs
FEATURES
• Standard pneumatic cylinder provides height adjustment of 4"
• Back tilt can be locked in five positions or left free flow
• Frame, outer back and five star base are plastic
• Synchro-tilt 2.7:1 ratio
• Tension control
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete, or tile
NOTES
Single Upholstered: The same fabric is applied to the seat and inside back.
Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat
and the other fabric to the inside back. First fabric listed will apply to the back and is the
grade of fabric used to price the chair. A dual upholstery upcharge applies.
NACZ
Amicus Conference –
Synchro-Tilt – General Use Chair

Loop-Arm

T-Arm
Fixed T-Arm

PRODUCT OPTIONS
Size
F Mid-Back
H High-Back
Mechanism
Style
1 Standard
Synchro-Tilt
Arm Style
N No Arms
F Fixed T-Arms
L Fixed Loop Arms
Upholstery Style Back Upholstery
Finish
S Single
Upholstered
Cylinder Style
Frame & Base
Finish
(Optional)
Fabric
1 Standard
Leather
2 High
B Glides, Hard
3 Low
C Glides, Soft
D Dual
Upholstered
E Ebony
Casters/Glides
A Casters, Soft
Seat Upholstery
Finish
T Fixed Width& HeightAdjustable
T-Arms with
Pivoting Arm
Caps
(For Dual)

Fabric
Leather

SAMPLE ORDER CODE
NACZ F

1
L
D
DESCRIPTION
PRICE
MID-BACK (F)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
Grade 1
HIGH-BACK (H) (Continued)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Hard Glides (B) are specified
If Soft Glides (C) are specified

Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
741
831
863
896
778
868
900
936
818
908
941
974
856
946
978
1011
894
984
1017
1051
932
1022
1055
1089
972
1062
1094
1127
1009
1099
1132
1165
1143
1233
1265
1299
Leather
LB
Leather
LC
Leather
LD
1008
1098
1130
1164
1054
1144
1176
1211
1192
1282
1314
1349
1238
1328
1360
1395
Grade 1
COM/
Grade 2
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
807
897
929
965
853
943
975
1008
897
987
1021
1054
943
1033
1065
1098
986
1076
1110
1143
1032
1122
1154
1188
1077
1167
1200
1233
1122
1212
1245
1278
1166
1256
1289
1322
1322
1412
1445
1478
Leather
LA
Leather
LB
Leather
LC
Leather
LD
1265
1355
1388
1421
1448
1538
1571
1604
1509
1599
1632
1665
1204
1294
1327
1360
add
add
add
add
E
COL/
Grade 3
Leather
LA
HIGH-BACK (H)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
1
COM/
Grade 2
702
792
825
858
MID-BACK (F) (Continued)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
M501 M502






171
18
18
29
seating price & user guide – October 24, 2016

work chairs
FEATURES
• Standard pneumatic cylinder provides height adjustment of 4"
• Back tilt can be locked in five positions or left free flow
• Frame, outer back and five star base are plastic
• Synchro-tilt 2.7:1 ratio
• Tension control
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete, or tile
NOTES
Single Upholstered: The same fabric is applied to the seat and inside back.
Dual Upholstered: Two different fabrics are applied to the chair, one fabric to the seat
and the other fabric to the inside back. First fabric listed will apply to the back and is the
grade of fabric used to price the chair. A dual upholstery upcharge applies.
NACZJ
Amicus Conference – Synchro-Tilt
General Use Chair (CAL-TB133)

Loop-Arm

Fixed T-Arm

PRODUCT OPTIONS
Size
F Mid-Back

T-Arm
H High-Back
Mechanism
Style
1 Standard
Synchro-Tilt
Arm Style
N No Arms
F Fixed T-Arms
L Fixed Loop Arms



Fabric
D Dual
Upholstered
Cylinder Style
1 Standard
Frame & Base
Finish
E Ebony
Casters/Glides
(Optional)
A Casters, Soft
2 High
B Glides, Hard
3 Low
C Glides, Soft
Seat Upholstery
Finish
(For Dual)
Fabric
SAMPLE ORDER CODE
NACZJ F

S Single
Upholstered
T Fixed Width& HeightAdjustable
T-Arms with
Pivoting Arm
Caps


Upholstery Style Back Upholstery
Finish
1
L
D
M501 M502
DESCRIPTION
PRICE
MID-BACK (F)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
Grade 1
Grade 2
Grade 3
868
958
992
1025
909
999
1031
1064
946
1036
1068
1102
HIGH-BACK (H)
No Arms
Fixed T-Arms
Fixed Loop Arms
Fixed Width- & Height-Adjustable T-Arms
975
1065
1097
1131
1019
1110
1142
1175
1065
1155
1188
1221
If Dual Upholstered (D) is specified
If Soft Casters (A) are specified
If Hard Glides (B) are specified
If Soft Glides (C) are specified
add
add
add
add
1
E
171
18
18
29



CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

seating price & user guide – October 24, 2016














work chairs
Xpress
FEATURES
• Outer back and arms are plastic and finished in Ebony
• Multi-surface glides are standard when the Cantilever or Four-Leg frame style is
specified
• Hard casters are standard when the Four-Leg with Casters frame style is specified.
Soft casters may be ordered as an option
NOTES
When plastic back style is specified only the seat will be upholstered. When upholstered
pad on plastic back is specified both the seat and inside back will be upholstered.
Not all configurations are available as Xpress. Please see Xpress catalogue and/or
specification software for details.
NAMG
Amicus – Guest Chair


Four-Leg with Glides

Cantilever with Glides
PRODUCT OPTIONS
Size
D Low-Back

Frame Style
C Cantilever with
Glides
Arm Style
Upholstery/Back
Style
Upholstery Finish
Frame Finish
(Optional)
N No Arms
Z Plastic
Fabric
E Ebony
K Integrated Arms
U Upholstered Pad
on Plastic Back
Leather
C Chrome
F Four-Leg with
Glides (Shown)
Casters/Glides
A Casters, Soft
(For G frame
style)
K Mica Silver
D Glides
(For C & F frame
style)
G Four-Leg with
Casters

SAMPLE ORDER CODE

NAMG D

DESCRIPTION
C
K
Z
K
PRICE
WITHOUT CASTERS




Grade 1
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Grade 10
FOUR-LEG (F) PLASTIC BACK (Z)
No Arms
Integrated Arms
316
354
343
380
369
407
397
435
423
461
450
487
477
514
503
541
531
569
624
662
FOUR-LEG (F) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
362
400
389
426
417
454
443
481
470
508
497
534
524
561
552
589
579
616
672
709
CANTILEVER (C) PLASTIC BACK (Z)
No Arms
Integrated Arms
368
406
396
434
422
460
449
486
476
513
502
540
530
568
557
594
584
621
677
714
CANTILEVER (C) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
415
452
442
480
469
507
496
533
523
560
550
587
578
615
604
642
631
669
725
762
If Mica is specified
If Chrome Frame (C) is specified
If Soft Casters (A) are specified
add 56
add 56
add 29

Pricing is continued on the following pages.


COM/
Grade 2
seating price & user guide – October 24, 2016
work chairs
Xpress
NAMG
Amicus – Guest Chair (Continued)
DESCRIPTION
PRICE

WITHOUT CASTERS (CONTINUED)
Leather
LA
FOUR-LEG (F) PLASTIC BACK (Z)
No Arms
Leather
LB
Leather
LC
Leather
LD
Integrated Arms
499
537
526
563
604
642
630
668
FOUR-LEG (F) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
546
584
573
611
651
689
677
714
CANTILEVER (C) PLASTIC BACK (Z)
No Arms
Integrated Arms
552
589
579
616
656
694
682
720
CANTILEVER (C) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
599
637
625
663
704
741
730
767




WITH CASTERS
Grade 1
COM/
Grade 2
COL/
Grade 3
Grade 4
Grade 5
Grade 6
Grade 7
Grade 8
Grade 9
Leather/
Grade 10
FOUR-LEG (G) PLASTIC BACK (Z)
No Arms
Integrated Arms
346
384
373
410
400
437
427
465
453
491
480
518
507
544
533
571
561
599
654
692
FOUR-LEG (G) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
392
430
419
456
447
484
473
511
500
538
527
564
554
591
582
619
609
646
702
739
Leather
LB
Leather
LC
Leather
LD
Leather
LA
FOUR-LEG (G) PLASTIC BACK (Z)
No Arms
Integrated Arms
529
567
556
593
634
672
660
698
FOUR-LEG (G) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
576
614
603
641
681
718
707
744
If Mica is specified
If Chrome Frame (C) is specified
If Soft Casters (A) are specified




add 56
add 56
add 29




seating price & user guide – October 24, 2016

work chairs
FEATURES
• Outer back and arms are finished in Ebony
• Multi-surface glides are standard when the Cantilever or Four-Leg frame style is
specified
• Hard casters are standard when the Four-Leg with Casters frame style is specified.
Soft casters may be ordered as an option
NOTES
When plastic back style is specified only the seat will be upholstered. When upholstered
pad on plastic back is specified both the seat and inside back will be upholstered.
NAMGJ
Amicus – Guest Chair
(CAL-TB133)


Four-Leg with Glides

Cantilever with Glides
PRODUCT OPTIONS
Size
D Low-Back

Frame Style
C Cantilever with
Glides
Arm Style
Upholstery/Back
Style
N No Arms
Z Plastic
K Integrated Arms
U Upholstered Pad
on Plastic Back
F Four-Leg with
Glides (Shown)
Upholstery Finish
Frame Finish
Casters/Glides
(Optional)
Fabric
E Ebony
C Chrome
K Mica Silver
G Four-Leg with
Casters
A Casters, Soft
(For G frame
style)
D Glides
(For C & F frame
style)

SAMPLE ORDER CODE

NAMGJ D

DESCRIPTION
C
K
Z
K
PRICE
Grade 1
Grade 2
Grade 3
WITHOUT CASTERS






FOUR-LEG (F) PLASTIC BACK (Z)
No Arms
Integrated Arms
404
441
431
468
457
495
FOUR-LEG (F) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
450
487
477
514
503
541
CANTILEVER (C) PLASTIC BACK (Z)
No Arms
Integrated Arms
456
494
484
522
510
548
CANTILEVER (C) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
502
540
530
568
557
594
FOUR-LEG (G) PLASTIC BACK (Z)
No Arms
Integrated Arms
479
470
507
497
533
525
FOUR-LEG (G) UPHOLSTERED BACK (U)
No Arms
Integrated Arms
433
516
460
544
487
571
WITH CASTERS
If Mica is specified
If Chrome Frame (C) is specified
If Soft Casters (A) are specified
add 56
add 56
add 29
CAL-TB133 – flammability test procedure established by the State of California for seating furniture that is used in public occupancies.

seating price & user guide – October 24, 2016

Similar documents

t-3 overview

t-3 overview while lifting your weight from the seat until you reach the desired level and then release to lock in place. To lower the chair, lift the paddle up allowing your weight to push the seat down to the...

More information

02 Seating Work Chairs

02 Seating Work Chairs More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield varies from 60-80% and may be affected by the quality of the COL inclu...

More information