3 of 16 Drg and DocumentSchedule

Transcription

NFVP/CWP/2013-DD-002
INSTALLATION OF NEW COOLING WATER
PUMPS AT NFL, VIJAIPUR
DOCUMENT NO
Page 1 of 12
DRAWINGS & DOCUMENTS
DOCUMENT NO
Page 2 of 12
TABLE OF CONTENTS
SL. NO.
DESCRIPTION
SHEET NUMBER
1.0
3
2.0
CATEGORY OF DOCUMENTS
4
3.0
PROCEDURE
6
4.0
LIST OF DRAWINGS & DOCUMENTS
6
DOCUMENT NO
Page 3 of 12
1.0
1.1.
This chapter details out various drawings and doc uments to be g enerated at various
stages during the course of execution of the Project by the Bidder for different project
activities. Categorization of the documents/ drawings for review/ information/ records of
PMC and t he review/ approval requirements of the NFL along with routing of the
documents/ drawings will be conveyed separately as a philosophy.
1.2.
The efficient handling of drawings and documents to be prepared by the Bidder under
the contract is the key to the timely completion of the plants. The Bidder undertakes to
ensure that all drawings and documents to be submitted by him to the NFL shall be of
professional quality and conforming to the contractual requirements. The Bidder also
undertakes to institute a formal drawing control system which will be documented and
submitted to the NFL/ for review or approval.
1.3.
Compliance of this chapter on dr awings and doc uments is mandatory and i s
non-negotiable.
1.4.
The drawings / documents are to be generated by The Bidder at various stages of the
project covering different activities. The drawings / documents generated will be in the
category of Approval/ Review/ Information. The list of drawings and documents required
is enclosed; however, the categorisation for the drawings/ documents will be informed
separately. However, this will in no way relieve The Bidder of responsibility to conform
to drawings, standards, specification, codes and contractual requirements / obligations.
1.5.
The Bidder shall prepare the drawing numbering procedure and s ubmit to NFL for
approval. Each Drawing submitted by The Bidder shall be clearly marked with the name
of the NFL with revision number & date. It should contain the minimum following details:
1.5.1. Size of Drawing.
1.5.2. Discipline of Engineering for which the drawing is issued.
1.5.3. Discipline wise segregation of numbering sequence for example:
Bidder to note that the number corresponds to Ammonia-II & Urea-II C. W. Pumps
plants and shall be prefixed to all related documents/deliverables which shall be
indicated to successful bidder.
1.6.
For drafting of Drawings, Computer aided design and dr afting, AutoCAD 2010/latest
shall be used. Further, standard, approved and well established P.C. based computer
programmes/software packages, available in market shall only be used by The
Bidder/his sub Bidders/vendors etc. The Bidder shall bring out the list of all such
packages in the offer for each discipline for evaluation of bid. Every time a c omputer
aided design is submitted for review/ approval to NFL, it shall accompany with
input/output data on Compact disc (CD) along with the name of the software package
and operable on any system along with the requisite No. of Hard Copies (specified
elsewhere in the Bidding document).
1.7.
For drawing, data sheet and all graphic works AutoCAD 2010/latest and for all texts, MS
Word Package 2003/2007 shall be used. Soft Copies of all calculations & Drawings
shall be made available by the Bidder for review/records. Line List, Data Sheet & spread
sheets shall be pr ovided in MS Excel & all text items shall be i n MS Word. All other
documents like presentations etc. and other data shall be i n MS Office; the required
operating system for Data Exchange shall be at least Windows.
DOCUMENT NO
Page 4 of 12
1.8.
All documents before forwarding to NFL will have to be vetted in detail by The
Bidder/duly approved engineering sub Bidder appointed by The Bidder. Document
received without vetting will be returned.
1.9.
The review by the /NFL shall not be construed by The Bidder, as limiting any of his
responsibilities and l iabilities for mistakes and deviations from the requirements,
specified under these specifications and drawings.
1.10.
Each drawing submitted by The Bidder shall be clearly marked with the name of the
NFL, Unit Designation, Specifications, Title, Specification number and the name of the
Project with Revision number and date. If standards, catalogue pages are to be
submitted, the applicable items shall be indicated therein. All titles, noting, markings and
writings on the drawings shall be in English.
1.11.
All the dimensions should be in metric units. Upon receiving comments on Drawings &
Documents by The Bidder, the subsequent submission should give compliance report,
separately on each of the comments, document wise. Comments given by /NFL to be
discussed and finalised within agreed schedule.
1.12.
The schedule of submission of the Drawings & Documents shall be in accordance with
project plans only. The detailed list under different category, document wise, shall be
prepared by The Bidder for approval of NFL. This activity is to be completed within one
month of Fax of Intent.
1.13.
Sequence of submission of drawing is essential for proper review of documents and
timely completion of the project is to be adhered. In case sequence is not maintained,
the documents submitted will not be reviewed by NFL and responsibility of timely
execution of plant shall be to The Bidder's account.
2.0
CATEGORY OF DOCUMENTS
Category
1
2
Description
Records/
Information
Review
Action by NFL/
Bidder can continue to progress with the work. This
drawings or documents will be r etained with NFL for
information only. NFL/ reserves the right to advise The
Bidder of any comments (deviations from the contract) at
any time and The Bidder is liable to respond to satisfy
that the work being done is in accordance with the
contract; deviations, if any will be bidder's risk and cost.
NFL will review and advise The Bidder of any Comments
on Bidder’s Drawings / documents within specified
schedule (ie 2 weeks), from date of receipt in office of
Bidder's drawings/documents. The review period is
defined as date of receipt of documents by NFL to date of
issue of comments by NFL. This review period shall be
valid only if submission of drawings is done by Bidder in
accordance with approved drawings / documents
schedule as indicated in ITB. In case of any nonconformity to the above by Bidder due to which the
period of review extends beyond 2 weeks by the,
schedule delay, if any will have to be absorbed by the
Bidder.
DOCUMENT NO
Page 5 of 12
2.1
The documents falling under Review category will be returned with comments within
specified time schedules subject to fulfilling other conditions enumerated. The
information category document will be r etained for information only but however NFL
reserves the right to comment at any stage of the Project, but not later than two weeks
of receipt.
2.2
Where clearance of NFL/ is required for ordering of equipment materials, enquiry
documents and one technically selected offer is to be s ubmitted for review. The unpriced copies of purchase orders detailing both technical and commercial aspects for all
items shall be submitted to / NFL within 15 days of issue of the same.
2.3
Each purchase order forwarded should contain complete technical documents. It is
obligatory for The Bidder to obtain acceptance on al l the technical documents and
accepted
copy
only
to
be
forwarded
to
NFL.
Any
inaccuracies
/omissions/inconsistencies noticed and brought to the notice of The Bidder at any stage
of the project will be rectified/ replaced by Bidder without any cost & time implication to
the NFL/ .
2.4
Detailed manufacturing schedules of fabricated/ manufactured items shall be submitted
within one month of ordering, Status report for all the items in detail, will be submitted
once in a month.
2.5
As Built Drawings:
2.5.1.
As built drawings and documents will be generated within one month of
completion of activities on respective items of work.
2.5.2.
Bidder will furnish reproducible and el ectronic files of all the drawings under
their scope to NFL certified as “As-Built Issue” by Third Party Inspection Agency
(TPIA) for Vendor Items coming under Third Party Inspection / Bidder for all
other drawings.
2.5.3.
Upon completion of identifiable units or components of the fabrication,
construction and installation phase of the project the Bidder will complete all the
related plans to the "as built' stage including all Vendor drawings and furnish
NFL with the following:
a) One complete set of all original tracings copies.
b) One complete set of reduced size (A3-297x420 mm) copies of all drawings.
c) One set of CD for all documents/drawings/data
d) All the as built drawings duly certified should be scanned and converted into
electronic files made on magnetic/discs/optical long storage.
e) All other project documents such as operating and m aintenance manuals,
manufacturers' Catalogues etc. shall also be scanned on magnetic/optical
discs for safe storage and retrievals by the NFL when needed.
f)
8 complete sets of full size prints of the drawings and 4 sets of reduced size
prints.
g) 8 complete bound s ets of Manufacturer's specifications including design
calculations.
h) 8 complete sets in hard binders of the Manufacturers data book including
certified prints and data for all items including test reports. Data Books shall
DOCUMENT NO
Page 6 of 12
be complete with index as tag numbers associated with Manufacturer's data
shown. Equipment data shall include as a minimum requirement the
principal and description of operation, drawings and dimensions, spare parts
lists and un-priced purchase orders and bill of material.
i)
8 bound copies each of the Spare Parts data books and the Lubricants
inventory Schedule.
j)
8 complete sets of field records shall be s igned by both the Bidder's and
NFL's Representative at the site.
k) Original approvals and related drawings and documents from the statutory
authority.
l)
3.0
Copies of correspondence with the statutory authorities.
PROCEDURE
The procedure for compilation of final as-built documents / drawings shall be informed
later. However the Procedure for routing the final / as built documents/ drawings to /
NFL shall be informed during the execution stage.
4.0
LIST OF DRAWINGS & DOCUMENTS
4.1
PROCESS
Sl.
Description
With Bid
(Y/N)
For
Review/
Approval
For
Information
Final/
Approved
/ As-built
1.0
Design Basis
Y
Y
Y
2.0
Process Description
Y
Y
Y
3.0
Process Flow Diagrams
Y
Y
Y
4.0
P&I Diagrams
Y
Y
Y
5.0
Tie-in Point Diagram
Y
Y
Y
Y
Y
Y
Y
Y
Y
6.0
7.0
Data sheet of all equipment and
machinery
Guaranteed Consumption of utilities
DOCUMENT NO
Page 7 of 12
4.2
Sr.
PIPING
Description
With Bid
Y/N
Y
For
For
Final/
Review/
Informat Approved
Approval ion
/ As-built
1.0
Equipment layout drawing.
Y
Y
2.0
Piping Layout drawing.
3.0
Quality control procedure & plan for piping
system.
Y
4.0
Filled in Valve Data Sheet.
Y
Y
5.0
Design data and layout.
5.1
Design basis
Y
Y
5.2
Piping material specification
Y
Y
6.0
Issued for construction (IFC) Drawing.
6.1
Piping GA DRGS.
Y
Y
Y
6.2
Isometrics
Y
Y
Y
6.3
Piping supports, operating platforms drg.
Y
Y
Y
7.0
Material Take-offs
8.0
Material and Purchase Requisitions
9.0
Design calculation / Documents.
9.1
Flexibility Analysis of Piping
Y
Y
9.2
Support and load data
Y
Y
10.0
Vendor Drawings
10.1
Valves
Y
10.2
Loading Arms
Y
11.0
As Built drawings
11.1
Piping GAD’s
Y
Y
11.2
Isometrics
Y
Y
11.3
All inspection, testing & NDT Records.
Y
Y
(Conceptual)
Y
Y
Y
DOCUMENT NO
Page 8 of 12
4.3
Civil
Sl. No. Description
Final/
For
For
With Bid
Review/
Approved /
Information
(Y/N)
Approval
As-built
1.0
Engineering specifications
Y
2.0
Design basis
Y
3.0
Overall foundation layout drawings
Y
4.0
Drawings & design calculations Equipment
foundations
Y
Y
5.0
Drawings & design calculations for
Steel/RCC structures foundations
Y
Y
6.0
Drawings & design calculations for
Steel/RCC structures
Y
Y
7.0
Drawings & design calculations for major
Steel/RCC structures/foundations viz.
compressors & machine foundations etc.
Y
Y
Y
Y
Y
Y
Structural layout drawings:
8.0
Showing key plan wise Structural Sectional
drawings, platforms, Ladders, Walkways &
Staircases
9.0
Fabrication & construction drawings for
structures
Y
10.0
Standards for steel structures
Y
11.0
Standards for concrete construction
Y
12.0
Standards for general civil
Y
Y
DOCUMENT NO
Page 9 of 12
4.4
ELECTRICAL
Sr.No.
Name of Document
1.
2.
3.
Load List indicating rated and absorbed
power of loads and duty type (Continuous /
Standby / Intermittent) at different voltages
including emergency loads
Construction power requirement:1.0 Peak load in KVA
2.0 Estimated KWH in KWH
3.0 Duration:- in days
Single line diagram including protection and
metering details
Documents Required (Y / N)
With
For
For
Bid
Approv
Informati
on
al
/
Review
To be
submitted
as and
Y
Y
when
revised-
Final /
Approv
ed/ AsBuilt
Y
Y
-
Y
Y
Y
Y
-
Y
4.
Specification of all Electrical Equipment
-
Y
-
Y
5.
Filled in Specification Sheets and Technical
Particulars of all equipment
-
Y
-
Y
6.
General arrangement and f
drawings of all equipment
7.
Equipment layout in Sub Station, MCC
room, and plant area showing location of all
electrical equipment
8.
Cable schedule
-
Y
Y
9.
Cable rack / trench / pipe layout
-
Y
Y
10.
Power Layout
-
Y
Y
11.
Schematic diagram for all control panel &
switch boards
12.
oundation
15.
Feeder Details of all LV switch boards /
Panels
Interconnection & Terminal connection
diagram
List of controls, interlocks, indication &
metering at various locations for all drives.
Characteristic curves for motor
16.
Earthing Layout
13.
14.
Y( Before
releasing
for civil
constructio
n)
Y
Y
Y
(Before order
placement to
sub vendor)
Same as
above-
Y
Y
-
Y
Y
-
Y
Y
-
Y
Y
-
Y
(1 month
before
commencem
ent of work)
Y
DOCUMENT NO
Page 10 of 12
Sr.No.
17.
Name of Document
Lighting layout
18.
Catalogues for all bought out items
19.
Bill of Materials covering all electrical
equipment and installation materials
20.
21.
Installation operation
(Manual)
Spare Parts list
and m aintenance
23.
Test Certificates
24.
Guarantee Certificates
25.
Quality Assurance Plan & Formats
26.
Erection Drawings & Details
27.
Construction & Commissioning specification
and procedure for all equipment
Documents Required (Y / N)
With
For
For
Bid
Approv
Informati
on
al
/
Review
Y( 2months
before
commencem
ent of actual
work)
Y( Before
erection of
equipment)
As and when
PO is
released to
sub vendors
Final /
Approv
ed/ AsBuilt
Y
-
Y
-
Y
-
-
Y
Y
**
-
Y
**
-
Y
** Y
-
Y
Y
-
Y
-
Y
Y
DOCUMENT NO
Page 11 of 12
4.5
Instrumentation
Sl.No
Description
With Bid
For Review/
For
(Y/N)
Approval
Information
Approved
/ As-built
1
Drawing & document schedule
2
Instrument Index
Y
3
Instrument sizing calculations
(control valves, safety valves &
flow elements)
Y
4
Utility requirements
Y
5
Level sketches
Y
6
Material Requisition
7
Purchase Requisition
Y
8
Vendor Drawings
Y
9
Functional Schematic
Y
10
Logic Diagrams as per ISA 75.2
Y
11
Instrument loop drawings
Y
12
Control room layout
13
Layout of equipment
control room
14
Power supply distribution
15
Wiring diagram for panels
16
Configuration diagram
Y
Y
17
I/O assignment
Y
Y
Y
Y
18
Y
Final/
Y
Y
inside
DCS graphics, report/log formats
& other DCS docs.
Y
Y
Y
Y
Y
Y
Y
Y
19
Instrument duct / tray layout
Y
20
Instrument cable schedule
Y
21
Instrument location plans
Y
22
Instrument installation drawings
Y
24
Spare part list for :
25
Mandatory S pares for start-up
& commissioning
Y
DOCUMENT NO
Page 12 of 12
26
Inspection & test procedures
Y
Complete catalogues with part list for
27
all
vendor
supplied
instruments,
Y
control etc.
28
29
Installation, operation & maintenance
manuals
As Built Drawings
Y
Y
Notes:
1. Final documentations including approved documentation from statutory design verifying
authority shall be s upplied in hard copies (6 sets) as well as soft copies in CD formats.
Applicable software is MS Office 2000, Word, Access, Excel and PDF.
2. Document marked as (**) are to be appr oved by authorized Inspection Agency and
Statutory Authorities as applicable.
3. Bidder shall submit document in required number of sets as stated elsewhere in
commercial part.
4. This list indicates the minimum drawings and do cuments requirements. However vendor
shall submit complete list of document & drawing schedule listing all drawings and
documents to be s ubmitted by them during the course of execution of the job. The
schedule shall list all drawings and documents along with their number and expected date
of submission.
LEGEND: Y - Yes, N - No
NFVP/CWP/2013-VL-002
ADDITIONAL C.W. PUMPS ALONWITH PIPING
AND ALLIED CIVIL WORKS
VENDOR LIST
DOCUMENT NO
Page 1 of 23
0
REV
Sl.No
1.
0
DOCUMENT NO
REV
Page 2 of 23
Vendor’s Name
Country
Cooling Water Pumps (Centrifugal)
1
Beacon Weir Ltd.,
India
2
Bharat Pumps & Compressors Ltd., Nani Allahabad
India
3
Jyoti Limited,
India
4
Kirloskar Brothers Limited, Pune
India
5
Mather & Platt Pumps Ltd., Pune
India
6.
Voltas Ltd. (Pumps & Projects Business Div),
India
7.
KSB Pumps Ltd., India, Pune
India
8
KSB AGg
Germany
9.
Deutsche Worthington Gmbh
Germany
10.
Mitsubishi Heavy Industries Ltd.
Japan
11
Shin Nippon Machinery Co Ltd
Japan
12
Torishima Pump Mfg Co Ltd.
Japan
13
Ebara Corporation, Japan
Japan
14
Flowserve (IDP)
Italy
15.
Mather & Platt Ltd. U.K.
U.K.
16
Kirloskar Ebara Pumps Limited,
U.K.
2.0
2.1
1
2
3
4
5
6.
7.
8
9.
10.
11
12
13
14
15.
16
17
18
19
20
21
22
PIPING
CS Welded Pipes To API 5L Spiral Long. Welded (SAW/EFSW)
HEAVY METAL PIPE CENTRE (Upto 24" (Upto SCHXXS)
Jindal Pipes Ltd.
JOTINDRA STEEL & TUBES LTD. (½" to 14")
KALPESH TUBE(INDIA), (TRADER)
Lalit Profiles & Steel Inds. Ltd.
Mann Industries
Mukat Pipes Tarapur
PRATIBHA INDUSTRIES NB LTD.,(16" to 24" NB, Wall Thickness:6 mm to 20
mm)
P.K.Forge & Fitting Industries
Ratnamani Metals & Tubes Ltd.
SAIL
SAGAR STEEL CORPORATION (TRADER
Saw Pipes
Surinder Engg. Co. Pvt. Ltd
Surya Roshini Ltd
THE BENGAL MILL STORES SUPPLY CO.(TRADER)
Welspun Gujarat Stahl Rohren Limited (For Anjar and Dahej Plants)
Phoceenne
ETS Trouvay & Cauvin
Mannesmann Handel AG
Thyssen-Krupp Stahlunion GmbH
Dalmine SPA
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
France
France
Germany
Germany
Italy
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
2.2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Raccortubi SRL
Kosei Sangyo Ltd
Marubeni Itochu Steel
Mitsubishi Corporation
Nippon Kokan
Nippon Steel Corporation
Nishitani & Co. Ltd.
Nissho Iwai Corporation
Okura & Co. Ltd.
Sojitz Corporation
Sumitomo Metal Industries Ltd.
Hyundai Corporation
British Steel Corporation
Corus Tubes Limited
SAW pipes USA, Inc
CS/AS LT Seamless Pipes
BHEL
Indian Tube Co.
ISMT Limited
Jay Lakshmi steel & engineering co.
Jindal Saw Ltd.
Maharashtra Seamless Ltd.
Phoceenne
Horst Kurvers GmbH
Dalmine SPA
Gam Raccordi S.P.A
IBF Seamless Pipes SPA
Raccortubi SRL
Nishitani & Co. LTD.
Okura & Co. Ltd.
Sojitz Corporation
Hyundai Corporation
AB Sandvik Steel
Vomal International Limited
Corus Tubes Limited
2.3
1.
SS Seamless/ Welded Pipes
Anil Metal Corporation
DOCUMENT NO
0
REV
Page 3 of 23
Italy
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Korea
U.K.
U.K.
U.S.A
India
India
India
India
India
India
India
France
France
Germany
Germany
Italy
Italy
Italy
Italy
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Korea
Sweden
U.K.
U.K.
U.K.
India
DOCUMENT NO
REV
Page 4 of 23
2
3
Apex Tubes
BHANDARI FOILS & TUBES LIMITED(Seamless Upto 4"(Sch. 80)&Welded Upto
India
India
4
5
6
Choksi Tube Company Ltd.
HEAVY METAL & TUBES (Upto 8" (thickness upto 18.26 mm))
HEAVY METAL PIPE CENTRE (Upto 8" ( Upto SCH80S) (PDIL approved
Manufacturer's Make only))
Jaylakshmi Steel & Engg. Co
Jindal Saw Ltd.
KRYSTAL STEEL MANUFACTURING PVT. LTD. (Upto 2" (Material upto
Grade SS 321))
Mardale Pipes Plus Ltd
MODERN TUBE INDUSTRIES LIMITED (Upto 2" (Upto SS Grade 321))
Nuclear Fuel Complex
Prakash Steelage Limited(0.5’’ to 20’’ welded & 0.25’’ to 8’’ smls (upto sch
40s))
QUALITY STAINLESS PVT. LTD. ( Seamless: Upto 6" (SCH40S ), Welded:
Upto 20" (SCH40S)
Rajendra Mechanical Industries Ltd.
Ratnamani Metals & Tubes Ltd.
SANDVIK ASIA PVT. LTD. (¾" to 2" (Thk: upto 8.74 mm))
SANGHVI METALS (TRADER)
SCORODITE STAINLESS (INDIA) PVT. LTD. (Upto 2" (Upto SS Grade 321))
Shubhlaxmi Metals & Tubes Pvt. Ltd
Suraj Stainless Limited
Phoceenne
H. BUTTING GmbH & CO. (Seamless : Upto 30" (upto 16mm thk) & Welded:
Upto 72" (upto 64mm )
Horst Kurvers GmbH
Thyssen-Krupp Stahlunion GmbH
Dalmine SPA
Gam Raccordi S.P.A
Raccortubi SRL
Nishitani & CO. LTD.
Okura & Co. LTD.
Sojitz Corporation
Sumitomo Metal Industries LTD.
Ab Sandvik Steel
T.T.I. – Tubacex Tubos Inoxidables, S.A.
SOSTA BV (Upto 72" ( thickness upto 25.4 mm))
India
India
India
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
20" (Thk. <= 8
0
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
France
France
Germany
Germany
Germany
Germany
Italy
Italy
Italy
Italy
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Sweden
Spain
Netherland
U.K.
46
47
48
3
1.
2
3
4
5
6.
7.
8
9.
10.
11
12
13
14
15.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
37
38
39
40
41
DOCUMENT NO
0
REV
Page 5 of 23
Corus Tubes Limited
Hyundai Corporation
Fittings: CS/AS/SS Seamless & Forged
Amforge Industries
Anil Metal Corporation
COMMERCIAL SUPPLYING AGENCY
CSA FITTINGS (Forged: ½" to 2" (Upto 9000#) & Seamless: 2" to 8" (Upto SCH
XXS))
EBY Fasteners
EBY Industries
FIT-TECH INDUSTRIES (CS (Forged) Elbow and Tee ½" NB to 1 ½" NB, Rating
3000#, 6000#, 9000#
Flash Forge(P) Ltd.
Gujarat Infrapipes Pvt. Ltd.
IISCO Ltd.
Jay Lakshmi Steel & Engineering Co.
KALPESH TUBE(INDIA),(TRADER) (upto a max order value Rs.25.0 lakh)
M.S Fittings Manufacturing Co. Pvt Ltd.
Mardale Pipes Plus Ltd
National Org Chemical India Ltd
Navkar Forgings & Fittings Pvt. Ltd
NL HAZRA
P.K Forge & Fitting industries
Parmar Techno Forge
Perfect Marketing (P) Ltd,
PETROCHEM INDUSTRIES (Seamless: upto 16" (all Fittings) & upto 36"
(Only Caps) Sch : XXS /
RAJENDRA FORGE INDUSTRIES (CS: Upto 12" Sch 40 & SS: 6" Sch 40S)
SAGAR STEEL CORPORATION (TRADER)
Sawan Engineers
Shivananda Pipe Fittings Ltd.,
Surya Roshni Ltd
S & G Engineers (P) Ltd.
STEWARTS AND LLOYDS OF INDIA LIMITED
Teekay Tubes Private Limited
Topaz Piping Industries
Tube Bend
Tube Products Incorporate(CS fitting Only)
Visvesaraya iron & steel Ltd.
Zoloto Industries
BHDT GMBH
BHDT GMBH
Phoceenne
Vallourec
Seikmann Anlagen-Technik GMBH.
U.K.
U.K.
Korea
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Austria
Austria
France
France
France
Germany
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
4
1.
2
3
4
5
6.
7.
8
9.
10.
11
12
13
14
15.
16
17
18
19
20
DOCUMENT NO
0
REV
Page 6 of 23
TPS-Technitube Rohrenwerke GMBH
Horst Kurvers GmbH
Dalmine SPA
Gam Raccordi S.P.A
IND Meccanica Bassi Luigi & C. SPA
Mantovani SpA
Raccortubi Srl
Techno Forge SPA
Nippon Kokan
Nishitani & co. Ltd.
Okura & co. Ltd.
Sojitz Corporation
Avesta Candvite Tube AD
Helens Energy
Haitima Corporation
Corus Tubes Limited
Eurotube Limited
Bonney Forge
Forged Flanges
Ajay Forging Pvt. Ltd
Amforge Industries
Anandmayee Forgings PVT. LTD.
C D Engineering
Chaudhary Hammer Works (P) LTD.
Echjay Industries Ltd
Ferrous Alloys Forging Pvt. Ltd
Golden Iron & Steel Works
GOOD LUCK ENGINEERING CO. (½"-12" (Upto 2500#), 14"-16" (Upto 900#),
18"-32" (Upto 600#),
J.K Forgings
Kunj Forgings Pvt. Ltd.(Material CS/SS/AS)
MAHESH INDUSTRIES (Upto 8" (150#, Material: ASTM A105 only))
Perfect Marketing (P) Ltd
Punjab Steel
RAJENDRA FORGE INDUSTRIES (CS & SS : Upto 12", 300#)
R D Forge (A Unit Of R D Chemicals Pvt Ltd)
Sanghvi Forgings & Engineering Ltd
Sawan Engineers
S & G ENGINEERS (P) LTD.
TECHNO FORGE LTD. (Upto 42" (upto 300#), upto 24" (600#), upto 20" (900#),
upto 16" (1500#),
Germany
Germany
Germany
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Japan
Japan
Japan
Japan
Japan
Japan
Japan
Sweden
Sweden
Sweden
U.K.
U.K.
U.K.
U.K.
U.S.A.
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
21
22
23
24
25
26
27
28
29
30
31
32
33
5
5.1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
5.2
1
2
3
4
DOCUMENT NO
0
REV
Page 7 of 23
Tube Bend (Calcutta) Pvt Ltd
Viraj, Tarapur
Phoceenne
Horst Kurvers GmbH
I.S. International
Mantovani spa
Officine Nicola Galperti & Figlio S.P.A
Raccortubi Srl
Nichinan Sangyo CO. Ltd.,
Nishitani & CO. Ltd.
Sojitz Corporation
VALVES
Gate/ Globe/ Check Valves CS/SS/AS > =900 Lbs
Audco India Limited (L&T Valves Divn.)
BHEL (Valves Division)
BDK Engineering Industries Ltd. (upto 2500#)
FLOVEL VALVES PVT. LTD. (Dual Plate Check Valves only: Upto 24"
(900#))
KSB Pumps Limited (Valves Divn)
Larsen & Toubro Limited (1/2" to 2")
Leader Valves Limited (1500 & 2500# upto 12",forging upto 2" 2500#)
NSSL Limited
Oswal Industries Ltd. (1500 & 2500, 1/2" to 2" size)
Sempell Valves Pvt Limited
Tyco valves & Controls India Pvt Ltd,
Hoerbiger Ventilwerke,(For Plate Type Check Valves only)
Babcock Borsig Espana, S.A.
Velan Inc.
FRIULCO SPA (Upto 32" (900#); 24" (1500#); 14" (2500#))
Valvitalia SPA
BFE Bonney Forge Valve Licensee
Cesare Bonetti
Fasani S.P.A.
GTC Italia, S.R.L.
OMB S.P.A.
Petrol Valves S.R.L
Matsura H. P Machine Works Co.Ltd.
NishitanI & Co. Ltd.
POYAM VALVES, (AMPO S. COOP.) (Size upto 30" (Rating upto 2500#))
Sufa Limited
BEL Valves
Ball valves (Metal Seated)
Larsen & Toubro Limited
NSSL Limited (2" NB to 12" NB, Ratings:150# & 300# (Material: Cast CS/AS/SS))
OSWAL INDUSTRIES LTD. (Upto 24" (150#, 300#, & 600#))
VIRGO ENGINEERS LTD. (Upto16" (Upto 600#))
India
India
France
France
Germany
Italy
Italy
Italy
Italy
Japan
Japan
Japan
U.K.
India
India
India
India
India
India
India
India
India
India
India
India
Berlin
Canada
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Italy
Japan
Japan
Spain
U.A.E.
U.K.
India
India
India
India
DOCUMENT NO
0
REV
Page 8 of 23
5
WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast: Upto 30" (150# &
India
6
7
8
9
10
11
12
13
14
15
16
17
18
VELAN INC. (Size upto 16" (Rating upto 600#))
Alfa Valvole SRL
CESARE BONETTI SPA (Upto 24" (150#) & 4" (Upto 1500#) Trunnion Mounted only)
GE power (Nuovo Pignone SPA)
GTC Italia, S.R.L.
Petrol Valves S.R.L
Valvitalia Spa
PERRIN GmbH (Size upto 24" (Rating upto 2500#))
Red point alloys Bv
FRIULCO SPA (Upto 48" (150# & 300#); 20" (Upto 1500#); 12" (2500#))
POYAM VALVES, (AMPO S. COOP.) (Size upto 42" (Rating Upto 2500#))
Metso Automation
Orbit Valves PLC
Butterfly Valves
Advance Valves (rubber lined and metal seated)
Audco India Limited (L&T Valves Divn.)
BDK Process Control Pvt Ltd. (upto 1600mm)
Crawley & Ray (F&E) Pvt. Ltd. (40mm - 1000mm)
Delval Flow Controls Private Limited (2" NB to 24" NB; for Classes: 150#,
300#,)
Fisher-Xomox Sanmar Ltd.
Flocon systems pvt. Ltd. (CS upto 12" 150#)
Fouress Engineering (I) Ltd.
Hawa valves india pvt. Ltd.
Hawa Engineers, Ahmedabad
Hi-tech butterfly valves India Pvt. Ltd (<300#,<30"(Teflon/Rubber)
,<72"(Metal)
Intervalve India Ltd.
Instrumentation Ltd. (palakkad)
L&T Ltd (1/2" to 24")
Mather & Platt (India) Ltd. A Subsidiary of WILO SE German (upto DN
1600,PN10)
Venus Pumps & Engineering Works (upto 600NB,150#)
VIRGO ENGINEERS LTD.((Triple Offset only): 3" to 24", Upto 600# (CS/SS))
XOMOX SANMAR LIMITED (FISHER XOMOX)
BHDT GMBH
Velan INC.
Griss Sapag Industrail Valves
Adams Armaturen
GTC Italia, S.R.L.
Haitima Corporation
Weir valves & controls division.
Leeds Valve Ltd
Curtis Wright Flow Control Corpoaration (COPES-VULCAN LTD)
Lear siegler meas. Ctrls. Corp
Tyco International INC.,U.S.A.
Emerson Process Mgt
canada
Italy
Italy
Italy
Italy
Italy
Italy
Germany
Netherland
Italy
Spain
Singapore
Singapore
5.3
1.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
300#); 20" NB
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Austria
Canada
France
Germany
Italy
Taiwan
U.K
U.K
U.S.A.
U.S.A.
U.S.A.
U.S.A.
DOCUMENT NO
REV
Page 9 of 23
31
32
Spx Valves & Controls
XOMOS (Crane Co)
Plug Valves (Non Lubricated)
U.S.A.
U.S.A.
1.
2
3
A V VALVES LIMITED (Upto 20" (150#) (CS & SS)
Audco India Ltd (L&T Valves Divn.)
AZ ARMATUREN GMBH (½" NB to 20" NB, 150#, 300#, 600# (Matl. CS, SS &
AS))
BDK Process Control Pvt Ltd.
Crawley & Ray (Founders & Engineers) Pvt. Ltd (DN 200)
L&T Ltd ( 1/2" to 24")
WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Upto 16"(150#), 12"
(300#), 3" (600#))
Xomox Sanmar Limited (Fisher Xomox)
O.M.S. Saleri Di Saleri P & Figli S.M.C.
POYAM VALVES, (AMPO S. COOP.) (Upto 30" (Upto 900#) for Lift Plug valves only.)
India
India
India
5.4
4
5
6.
7
8.
9.
10.
6
1.
2
3
4
5
6.
7.
8
9.
10.
11
12
13
14
7
1.
2
3
4
5
6.
7.
8
9.
10.
11
12
13
8
1
0
Spirally Wound Gaskets
Gaskets (India) Pvt. Ltd
Goodrich gasket Pvt. Ltd.
IGP Engineers Limited
Madras Industrial Products
Packings & Jointings Pvt. Ltd
Perfect marketing (P) Ltd,
Prashant Engg Stores
Spiraseal gaskets pvt. Ltd.
Starflex sealing india pvt. Ltd.
Uniklinger Gaskets, Pune
Garlock Sealing systems Ltd., Pune
TEADIT gaskets, Mumbai
UNIQUE INDUSTRIAL PACKINGS PVT.LTD. (Upto 42"(600#) & Upto 24"
(2500#))
Expansion Joints & Bellows
Cori Engineers PVT. Ltd.
D.Wren & Co.
Flexatherm Expanllow Pvt. Ltd
Flexican Bellows & Hoses Pvt. Ltd
Fluidyne Engg. (I) Pvt. Ltd
Keld Ellentoft India Pvt. Ltd
Lonestar Industries
Metallic Bellows (India) Pvt. Ltd
Prashant Engg Stores
Standard Precision Bellows
Tuboflex
FLEXIDER S.P.A.
Ke-Burgmann India Pvt. Ltd., India
STRAINERS (PERMANENT INCLUDING Y-TYPE)
FLAIR STRAINERS & FILTERS (Size upto 42" (Rating upto 1500#))
India
India
India
India
India
India
Italy
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Germany
Italy
India
2
3
4
5
6.
7.
8
9.
10.
9
1.
2
3
4
5
6.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
11
DOCUMENT NO
CAPITAL INDUSTRIES
CONSOLE ENGG. & FASTNERS INDUSTRIES
EBY FASTNERS
FIT TIGHT NUTS & BOLTS LTD.
FIX FIT FASTENERS MFG. PVT. LTD.
INDUSTRIAL ENGINEERING CORPORATION (Size upto 4" (M100))
MEGA ENGINEERING PRIVATE LIMITED (½" to 3" Material: CS/AS/SS)
METRO MECHANICAL PVT.LTD.
NAGBHUSHANAM INDUSTRIES
NIREKA ENGG. CO. PVT. LTD.
PACIFIC FORGING & FASTENERS PVT. LTD. (M 10 to M125)
PERFECT MARKETING (P) LTD,
PIONEER NUTS & BOLTS PVT. LTD.
PRECISION AUTO ENGINEERS
PRECISION ENGINEERING INDUSTRIES
PTD FASTNERS PVT. LTD.
SUNDARAM FASTENERS LIMITED
UDHERA FASTENERS
REV
Page 10 of 23
GRAND PRIX ENGINEERING PVT. LTD. (upto 60" pipeline, upto ANSI 1500#)
GREAVES LIMITED
GUJARAT OTOFILT
KWIKFLO FILTERS PVT. LTD.
LEADER VALVES LIMITED (upto 300# & upto 12"size)
MOD FABRICATORS
MULTITEX FILTERATION ENGINEERS LTD
ZOLOTO INDUSTRIES (15mm to 100mm)
BOTELI VALVE GROUP CO. LTD. (Y - Type only: 14" (150#) & 3" (300# &
600#))
SPRING SUPPORTS
MYRICS PIPING SYSTEM PVT.LTD.
PIPE SUPPORTS INDIA PVT. LTD.
PIPING & ENERGY PRODUCTS (P) LTD.
SARATHI ENGG. ENTERPRISES PVT. LTD.
SPRING SUPPORTS MFG. CO.
FLEXIDER S.P.A.
FASTENERS
AEP COMPANY
India
India
India
India
India
India
India
India
China
India
India
India
India
India
Italy
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Mechanical Seals
1
2
12
Flowserve Sanmar, New Delhi
Eagleburgmann India
India
India
Coupling
1
2
3
Rathi-Discoflex,
Euroflex,
John Crane (Triveni-Flexibox)
0
India
India
India
DOCUMENT NO
0
REV
Page 11 of 23
Electricals:
13
HT Motors, HT Panel, HT cables ,Refer vender list Anmnexure-E1-17.0
Induction Motors – LV (415 V) (For Hazardous Area)
1.
Asea Brown Boveri Ltd.
2.
Crompton Greaves Ltd.
3.
Bharat Bijlee Ltd.
4.
Siemens AG
5.
Kirloskar Electric Company Ltd.
6.
7.
Toshiba Corporation
8.
General Electric Co.
9.
Fuji Electric Systems Co. Ltd.
LT (1.1 KV) Power Cables
1
Cable Corporation of India Ltd.
2
Ravin Cables Limited
3
RPG Cables Limited
4
Finolex Cables Ltd.
5
KEI Industries Ltd.
6
Torrent Cables Limited
7
Industrial Cables (I) Limited
8
NICCO Corporation Limited
9
Universal Cables Ltd.
10
KEC International ltd.(Formerly RPG Cables Limited)
11
Gemscab industries Limited
12
Special Cable Pvt. Limited
13
Friends Cables Industries
14
Polycab Wires Pvt. Limited
LT (1.1 KV) Control Cables
1
Cable Corporation of India Ltd.
2
RPG Cables Limited
3
Finolex Cables Ltd.
4
KEI Industries Ltd.
5
Cords Cable Industries Ltd.
6
NICCO Corporation Limited
7
Universal Cables Ltd.
8
KEC International ltd.(Formerly RPG Cables Limited)
9
Gemscab industries Limited
10
Special Cable Pvt. Limited
11
Friends Cables Industries
12
Polycab Wires Pvt. Limited
India/Sweden
India
India
Germany
India
Japan
Japan
USA
Japan
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Switchboards – LV (415 V) (MCC/PCC/PMCC)
1.
2.
3.
Larsen & Toubro Ltd.
GE Power Controls India Pvt. Ltd.
Siemens Ltd.
India
India
India
DOCUMENT NO
0
REV
Page 12 of 23
Control & Relay Panel
1.
AREVA
India
2.
Asea Brown Boveri Ltd.
India
3.
Controls & Switchgear Co. Ltd.
India
4.
Elecmech Corporation
India
5.
Larsen & Toubro Ltd. (El. Products Divn)
India
6.
Siemens Ltd.
India
7.
Lotus Powergear Pvt. Ltd.
India
Flameproof Local Control Station, Junction Box, Lighting Fitting, Plug, Socket, Hand Lamp,
Accessories Lighting, Distribution Board & Control Panel
1.
FCG Flameproof Control Gears Pvt. Ltd.
India
2.
Baliga Lighting Equipments Ltd.
India
3.
Sudhir Switchgears Pvt. Ltd.
India
4.
Flameproof Equipments Pvt. Ltd.
India
5.
Flexpro Electricals Pvt. Ltd.
India
6.
R. Stahl
India/Germany
7.
Siemens A.G.
Germany
8.
Legrand S.A.
France
9.
FCG Power Industries Pvt. Ltd.
India
10.
SCG Ex D Tech Pvt. Ltd.
India
Cable Trays
1
Globe Electrical Industries India
India
2
Metalite Industries India
India
3
India
4
Stealite Engineering Co. India
Indiana Cable trays corporation India
5
Sadhana Engineering Corporation India
India
6
ATP Engineering Works
India
7.
MEK Engineer & construction
India
8
Slotco steel products Pvt. Ltd.
Earthing & Lightning Protection Material – (Al/GI) Wire/Strip
.Anand Electric Trading Co.
1
India
India
India
2
Bharti Exports India
India
3
India
4
Controls & Switchgear Co. Ltd.
Jayant Metal Mfg. Co.
5
Metalite Industries India
India
6
Premier Power Products (Calcutta) Pvt. Ltd.
India
7
Control & switchgear Ltd.
India
8
Jamna Metal Co. India
India
India
Protective Relays (other than BMR)
1
AREVA (HV & MV switchboard)
India
2
ABB Limited
India
INSTRUMENTATION
Gas Analysers (IR, Thermal Conductivity, Paramagnetic)
ChemtrolsEnginnering Limited (Maihak Make)
India
5.0
1
2
3
4
5
Emerson Process Management (I) Pvt. Ltd
Siemens AG
Emerson Process Management Singapore Ltd
M.S.A International
pH, conductivity & ORP Analyser
1
2
Forbes PolymetronPvt. Ltd
3
Zellweger SA
4
Yokogawa Electric Corporation
5
6
Foxbaro Far East Pte Ltd
7
Hach company
Trace Analyser/ Ion Selective
1
Forbes PolymetronPvt. Ltd
2
Zellweger SA
3
Bran &Luebbe Ltd
4
Hach company
SOX/ NOX Analyser
1
2
Sick AG
3
Siemens AG
4
Horiba Ltd.
5
6
7
Lear Siegler Meas. Controls Corp.
8
M.S.A International
9
Thermo Environment Instruments Inc
Mass Spectrometer
1
VG Gas Analysis Systems
2
Orbital Science Corporation
3
Thermofisher
Gas Chromatograph
1
Applied Automation Inc
2
Foxbaro Far East Pte Ltd
Flue Gas Analyser (ZrO2 type)
1
2
AmetekInc
3
GE Panametrics
H2S/ Total Sulphur Analysers
1
Barton Instrument Systems Limited
2
Thermofisher
3
Teledyne
System House Analysers
1
ChemtrolsEnginnering Limited
2
3
Intech
Density Analysers
1
Emerson Process Management (I) Pvt. Ltd (coriolis type)
2
Bopp & Reuther MesstechnikGmbh (coriolis type)
3
SolartronMobrey
4
Chemtrolls for Sarasota (thermo electron corporation)
5
Sarasota (thermo electron corporation)
Moisture Analysers
1
GE Panametrics
2
AmetekInc
Gas & Fire Detection System
1
Andrew Yule & Company Ltd. (Fire)
DOCUMENT NO
0
REV
Page 13 of 23
India
Germany
Singapore
U.S.A
India
India
France
Japan
Singapore
Singapore
U.S.A
India
France
U.K
U.S.A
India
Germany
Germany
Japan
Japan
Singapore
U.S.A
U.S.A
U.S.A
U.K
U.S.A
U.K / India
Singapore
Singapore
India
U.S.A
Ireland
U.K
U.K/ India
India
India
India
Italy
India
Germany
U.K
India
USA
Italy
U.S.A
India
DOCUMENT NO
0
REV
Page 14 of 23
2
Honeywell Automation India Limited (Gas)
3
J B Boda And Brothers Pvt. Ltd. (Gas Make-International Sensor Technology)
4
Pollution Protection System Mumbai Pvt Ltd (Gas)
5
Teledyne Fluid Systems (Gas)
6
General Monitors (Gas)
Flow Element: Orifice/ Venturi/ Flow Nozzle
1
Baliga Lighting Equipments Limited (Only Orifice)
2
General Instruments Consortium (Only Orifice)
3
Instrumentation Ltd, Palakkad
4
Micro Precision Products Private Ltd.
5
Eureca Industrial Eqipments Pvt Ltd.
6
Bopp & Reuther MesstechnikGmbh
7
Technomatic Spa
8
ISA Controls Limited
9
Daniel Measurement & Control
Pitot Tube/ Annubar
1
Control Engineers
2
Emerson Process Management (I) Pvt. Ltd.
3
Micro Precision Products Private Ltd.
4
Technomatic Spa
5
ISA Controls Limited
6
Daniel Measurement & Control
Rotameters
1
Instrumentation Engineers Pvt. Ltd.
2
Krohne Marshall Pvt. Ltd.
3
Placka Instruments & Controls Pvt. Ltd. (Purge Rotameter Only)
4
Rota Instrumentation
5
Eureca Industrial Eqipments Pvt Ltd.
6
Krohne
7
Rota Yokogawa Gmbh& Co. Kg
8
Tokyo Keiso Co. Ltd.
9
Yamatake Corporation
10
Emerson Process Mgt
Mass Flow Meter (Coriolis Type)
1
2
3
Endress + Hauser Gmbh& Co.
4
Krohne
5
Schlumberger Resource Management Ltd.
6
Yokogawa Electric Corporation, Japan (M/s Yokogawa India Limited)
7
FmcSanmar Ltd.
8
9
Instromet International N.V
10
Itochu Corporation (Rep.KubotaCorpn.)
11
12
Oval Asea Pacific Pte Ltd
13
14
Emerson Process Mgt
15
Emerson Process Mgt
16
Rockwell International Corpn.
Vortex meter
1
2
Yokogawa Limited
3
4
Endress + Hauser Gmbh& Co.,
5
Krohne
6
India
India
India
Thailand
U.K
India
India
India
India
India
Germany
Italy
U.K
U.S.A
India
India
India
Italy
U.K
U.S.A
India
India
India
India
India
Germany
Germany
Japan
Japan
U.S.A
India
Germany
Germany
Germany
U.S.A
India
India
Germany
Holland
Japan
Japan
Singapore
U.K
U.K
U.S.A
U.S.A
India
India
Germany
Germany
Germany
Japan
DOCUMENT NO
7
PD Meter
1
Rockwin Flow Meters (I) Pvt. Ltd.
2
3
Oval Asea Pacific Pte Ltd
4
Emerson Process Mgt
5
Magnetic Flow meter
1
2
3
4
Krohne
5
6
Yokogawa Electric Corporation, Japan (M/s Yokogawa India Limited)
Pressure Gauges
1
A N Instruments Pvt. Ltd.
2
General Instruments Consortium,
3
H.Guru Industries
4
Manometer (India) Pvt. Ltd
5
PeejeeEngg. Works
6
Precision Industries Ltd. (standard normal type)
7
Premium Inst. & Controls Ltd.
8
Waaree Instruments Ltd.
9
Walchandnagar Industries Ltd.
10
Ashcroft India(P) Ltd. (standard normal type)
11
Dresser Europe S.A
12
WikaAlexenderWiegardGmbh& Co.
13
Spriano Spa
14
Nagano Keiki Seisakusho
15
Rueger SA
16
Budenberg Gauge Co. Ltd
Vol. Seal Pr. Gauges
1
A N Instruments Pvt. Ltd. (=<600# Except Urea Service)
2
Dresser Europe S.A.
3
WikaAlexenderWiegandGmbh& Co.
4
Spriano Spa
5
6
Rueger Sa
7
Budenberg Gauge Co. Ltd.
Local D/P Indicators
1
Switzer Instrument Co.
2
3
Delta Controls Ltd.
Pressure & D/P Transmitters
1
2
Honeywell Automation India Limited
3
Yokogawa Limited
4
Siemens Ag, Germany
5
6
7
Emerson Process Mgt Singapore Ltd
8
SmarSingaporePte. Ltd.
9
Honeywell Inc.
10
Moore Products Company
11
M/s Fuji Electric Co
Temperature Transmitters
1
0
REV
Page 15 of 23
U.S.A
India
Germany
Singapore
U.S.A
U.S.A
India
India
Germany
Germany
Japan
India
India
India
India
India
India
India
India
India
India
India
Germany
Germany
Italy
Japan
Switzerland
U.K
India
Germany
Germany
Italy
Japan
Switzerland
U.K
India
U.K
U.K
India
India
India
Germany
Japan
Japan
Singapore
Singapore
U.S.A
U.S.A
Japan
India
2
3
Yokogawa Limited
4
Siemens Ag, Germany
5
Fuji Electric
6
M-System
Vol. Seal Pr./Dp Transmitter
1
2
Yokogawa Limited
3
Fuji Electric Systems Co., Ltd. (Except Urea Service)
4
5
6
7
Moore Products Company
Pressure & D/P Switches Including Vol. Seal
1
Indfos Industries Ltd. (Except Vol.Seal)
2
Switzer Instrument Co., (Except Vol.Seal)
3
4
5
Delta Controls Ltd.
6
Sor Inc.
7
United Electric Controls Co.
Vol. Seal Pressure.&Dp Switches (Urea Service)
1
Spriano Spa
2
Delta Controls Ltd.
3
Sor Inc.
Transparent/ Reflex / Bicolor Mag.Level Gauges
1
Chemtrols Samil(India) Pvt Ltd.
2
Pune TechtrolPvt.Ltd. (<=300# Rating Only)
3
Tecnomatic (India) Pvt. Ltd.
4
V-Automat & Inst. (P) Ltd., (Upto 300#)
5
Nisan Scientific Process Equipments Pvt. Ltd.
6
Richard Klinger Ag
7
CesareBonetti
8
Technomatic Spa
9
Nihon Klingage Co. Ltd.
10
Clark-Reliance Corp.
11
Jerguson Gauge & Valve Co.
12
Tyco International Inc.
Level Switches (Float & Displacer Type)
1
V-Automat & Inst. (P) Ltd., (Upto 300# , Non-Critical Service)
2
Magnetrol International N.V.
3
Isa Controls Limited
4
KdgMobrey Ltd.
5
Sor Inc.
Displacer Type Level Transmitters
1
Chemtrols Engineering Limited (Eckdart Make Electronics)
2
Dresser Valve India Pvt Ltd (Rating <= 600#)
3
Magnetrol International N.V. (Lvdt)
4
Dresser Masoneilan
5
Foxboro EckardtGmbh
6
Parcol Spa (Pneumatic Transmission Only)
Nucleonic Level Transmitter
1
Berthold Technologies Gmbh&Co.Kg
2
3
Kay Ray
Capacitance Type Level Transmitter
1
Magnetrol International N.V
DOCUMENT NO
0
REV
Page 16 of 23
India
India
Germany
Japan
Japan
India
India
Japan
Japan
Japan
Singapore
U.S.A
India
India
Japan
Japan
U.K
U.S.A
U.S.A
Italy
U.K
U.S.A
India
India
India
India
India
Austria
Italy
Italy
Japan
U.S.A
U.S.A
U.S.A
India
Belgium
U.K
U.K
U.S.A
India
India
Belgium
France
Germany
Italy
Germany
Germany
U.S.A
Belgium
2
3
Krohne
4
KdgMobrey Ltd
Tank Level Instruments
1
Endress + Hauser Gmbh& Co., (Non-Contact & Servo)
2
Krohne (Non-Contact Type)
3
Tokyo Keiso Co. Ltd.
4
EnrafSingaporePte. Ltd.
5
L & J Technologies
Resitive Electrode Type Level Instrument
1
Clark-Reliance Corp
2
Special Level Switches (Vibration Fork/Rf Admittance)
1
2
Sor Inc.
Temperature Elements (Thermocouple, Rtd)
1
Altop Industries Ltd. (Only Normal Type (Mi))
2
Detriv Instrumentation & Electronics Ltd (Only Normal Type)
3
Electrical & Electronics Ltd. (Only Normal Type)
4
Eliend Engineering Pvt. Ltd. (Only Normal Type)
5
General Instruments Consortium
6
Industrial Instrumentation, (Only Normal Type)
7
Sensycon ( M/S Degussa Ag )
8
W.C. HeraeusGmbh
9
Thermo Electric Co. Ltd.
10
Okazaki Manufacturing Co.
11
12
M/s Tecnomatic SpA
Bimetallic Thermometer
1
2
General Instruments Consortium
3
H.Guru Industries
4
5
Precision Industries Ltd.
6
Waaree Instruments Ltd
7
Ashcroft India(P) Ltd.
8
Technomatic Spa
9
10
Rueger Sa
11
Trend Instrument Inc.
Dial Thermometer (Hg In Steel/Glass)
1
2
3
H.Guru Industries
4
PeejeeEngg. Works
5
Precision Industries Ltd.
6
Waaree Instruments Ltd
7
Walchandnagar Industries Ltd.
8
Ashcroft India(P) Ltd.
Radiation Pyrometer
1
Siemens Ag, Germany
2
C.C.R. Technico
3
ChinoCorpn.
4
Land Infrared
5
Wahl Instruments
Gate/Plug Valves
1
Audco India Limited(L&T Valves Divn.)
DOCUMENT NO
0
REV
Page 17 of 23
Germany
Germany
U.K
Germany
Germany
Japan
Singapore
U.S.A
U.S.A
U.S.A
Germany
U.S.A
India
India
India
India
India
India
Germany
Germany
Holland
Japan
Japan
Italy
India
India
India
India
India
India
India
Italy
Japan
Switzerland
U.S.A
India
India
India
India
India
India
India
India
Germany
Italy
Japan
U.K
U.S.A
India
DOCUMENT NO
0
REV
Page 18 of 23
2
BHEL(Valves Division)
3
Chemtrols Engineering Limited (Plug Valves)
4
Ksb Pumps Limited (Valves Divn)
5
Velan Inc.
6
MalbranqueS.A.
7
CesareBonetti
8
Fasani S.P.A.
9
Petrol Valves S.R.L
10
Matsura H. P Machine Works Co.Ltd.
11
Bel Valves
Globe / Angle Valves
1
Dresser Valve India Pvt Ltd (Rating <= 600# , Size 3/4 To 6")
2
Fisher sanmar
3
Instrumentation Ltd. (Palakkad) (=<2500#,Except Slurry,Noise,Cavitatation)
Mil Controls Limited (=<600#,Except Slurry,Noise,Cavitation) For Non-critical
4
applications only.
R K Controls Instruments Pvt Ltd(=<600#,Except Slurry,Noise,Cavitation) For
5
Non-critical applications only.
Samson Control Pvt Ltd(upto 6’’ &=<600#) For Non-critical applications only.
6
7
Dresser Masoneilan (=<2500#,Urea Service Also)
8
Arca-ReglerGmbh (=< 2500#)
9
Parcol Spa (=<2500#,Urea Service Also)
10
Nippon Fisher Co. Ltd. (=<2500#)
11
Yamatake Corporation (=<2500#)
12
Fisher Xomox (=< 2500#)
13
Flowserve (=<2500#)
14
KOSO/KENT
Ball Valves
1
Tyco Valves & Controls (I) Ltd (=< 150 #)
2
Virgo Engineers Ltd. (=<600# With Maccair Actuators)
3
Metso Automation (=<2500#)
4
Petrol Valves S.R.L
5
Pibiviesse S.P.A. (Rating Upto 2500 #)
6
GTC Italia
7
Metso Automation (=<2500#)
8
Orbit Valves (=<2500#)
Butterfly Valves
1
Instrumentation Ltd. (Palakkad) (=< 300#)
2
Tyco Valves & Controls (I) Ltd (=< 150 #)
3
Virgo Engineers Ltd. (=<300#)
4
Parcol Spa (=< 2500# Urea Service Also)
5
Orton s.r.l (Upto 2500#)
6
Bray Controls(=< 300#)
7
Keystone (Upto 2500#)
8
Metso Automation (Upto 2500#)
9
Leeds Valve Ltd
Saunders (Pinch) Valves
1
Bdk Engineering Industries Ltd. (Upto 150#)
2
R K Engineering Pvt Ltd (Upto 150#)
Solenoid Valves
1
Asco (India) Limited
2
Rotex Automation Limited (for non-critical applications only)
3
IMI Norgren-HerionFluidtronicGmbh&Co.
4
Alexender Controls Ltd.
5
AscoJoucomatic Ltd.
Prds& Spray Nozzle,Vent Valves Upto 2500#
1
Cci Valve Technology Ab
India
India
India
Canada
France
Italy
Italy
Italy
Japan
U.K
India
India
India
India
India
India
France
Germany
Italy
Japan
Japan
Singapore
U.S.A
India
India
India
Italy
Italy
Italy
Italy
Singapore
Singapore
India
India
India
Italy
Italy
U.S.A
Singapore
Singapore
U.K
India
India
India
India
Germany
U.K
U.K
Sweden
DOCUMENT NO
0
REV
Page 19 of 23
2
Control Components Inc.
3
Spx Valves & Controls (Copes-Vulcan Ltd)
4
ARCA(Forbes Marshal)(mech spray nozzle type desuperheater )
5
Control Components Inc.
Electric Actuator
1
Rotork Control (Deutschland) Gmbh
2
Biffi Italia S.R.L
3
Limitorque, U.S.A
Air Filter Regulator
1
Divya Control Elements Pvt. Ltd.
2
Mil Controls Limited
3
Placka Instruments & Controls Pvt. Ltd.
4
Shavo Norgren(India) Pvt Ltd.
5
SMC
Limit/Proximity Switches
Osna Electronics Pvt. Ltd. (Intrinsically Safe Proximity Switches) (For non1
critical applications only)
2
Pepperl + Fuch
3
EL-O Matic India Pvt Ltd(for non critical apps)
4
Potex Manufacturers & Engineers Pvt Ltd(for non critical apps)
5
Pepperl + Fuch
6
Pepperl + Fuchs Pte Ltd.
7
Honeywell Inc.
Control Panel
1
Electronics Corporation Of India Ltd
2
Industrial Control Appliances (P) Ltd.,
3
Jaisun&Hutchisun Controls Ltd.,
4
Pyrotech Electronics Pvt.Ltd.
5
United Electric Co. (Delhi) Pvt. Ltd. (Upto 10 Mtrs.)
6
Yokogawa Limited
7
Instromet International N.V
8
Rittal
Panel Access. ( Relay,Switch,Lamp,Terminal,Push Button)
1
Industrial controls and appliances(ICA) for OMRON relays
2
Larsen & Toubro Ltd.(Control& Automation (Lamp, Push Button)
3
Rockwell Automation India Ltd. (Relays)
4
DigitableThielenGmbh& Co
5
Phoenix Contact Gmbh& Co.
6
Siemens Ag, Germany (Lamp,Pushbutton,Contactors)
7
Stahl-Und Apparatebau Hans LefferGmbh (Lamp,Pushbutton)
8
WagoKontakltechnikGmbh
9
Weidmuller Ltd.
10
Omron Corporation (Relay)
11
Pepperl + Fuchs Pte Ltd. (Switch)
Programable Logic Controller
1
Ge Fanuc Systems Prvitate Limited
2
Honeywell Automation India Limited (Safety System)
3
Larsen & Toubro Ltd.(Control& Automation (Non Failsafe)
4
Moore Controls Ltd. (Failsafe)
5
Rockwell Automation India Ltd. (Non Failsafe)
6
Siemens Ltd., (Non Failsafe)
7
Hima Paul Hildebrandt Gmbh + Co Kg (Failsafe)
8
Marconi Italiana (Non Failsafe)
9
Omron Corporation (Non Failsafe)
10
Triconex (Fault Tolerant Tmr)
11
Ge Fanuc Automation North America, Inc. (Fault Tolerant Tmr)
Distributed Control System
U.S.A
U.S.A
India
India
Germany
Italy
U.S.A
India
India
India
India
India
India
India
India
India
Germany
Singapore
U.S.A
India
India
India
India
India
India
Holland
India
India
India
India
Germany
Germany
Germany
Germany
Germany
Germany
Japan
Singapore
India
India
India
India
India
India
Germany
Italy
Japan
Singapore
U.S.A
1
2
Yokogawa Limited
3
Siemens Ag, Germany
4
Invensys
5
6
7
Honeywell Inc.
Multiplexer / Remote I/O
1
Mtl Instrument Limited
2
Pepperl + Fuch
3
Pepperl + Fuch
4
Stahl-Und Apparatebau Hans LefferGmbh
5
6
M.T.L., U.K.
Receiver Instruments (Indicator,Controller,Recorder)
1
Chino-Laxsons (India) Limited (Only Recorder)
2
Eurotherm Del India Limited
3
4
Moore Controls Ltd.
5
Yokogawa Limited
6
Siemens Ag, Germany
7
ChinoCorpn.
8
9
Heraeus Electro-Nite International N.V.
10
Honeywell Inc.
Alarm Annunciator
1
Industrial Instruments & Controls
2
Shree Electronics
3
M.T.L., U.K.
4
Rochester Instrument Systems Ltd.
5
Riley Panalarm
6
Ronan Engg. Co.
Barrier/Isolator/Trip Amplifier
1
MTL Instrument Limited
2
Pepperl + Fuch
3
DigitableThielenGmbh& Co
4
Foxboro EckardtGmbh
5
Pepperl + Fuch
6
7
8
9
Camille Bauer Ag
10
M.T.L., U.K.
11
Honeywell Inc.
Temperature Scanner
1
Industrial Instrumentation
2
Nishko
Speed Indicator
1
Pepperl + Fuch
2
Shinkawa Electric Co.
3
4
Jacquet
5
Bentley NevedaLlc
Anti Surge Controller
1
Compressor Control Corporation
2
Invensys Triconex
3
Dresser - Rand Co.
DOCUMENT NO
0
REV
Page 20 of 23
India
India
Germany
Holland
Japan
Singapore
U.S.A
India
India
Germany
Germany
Singapore
U.K
India
India
India
India
India
Germany
Japan
Japan
Japan
U.S.A
India
India
U.K
U.K
U.S.A
U.S.A
India
India
Germany
Germany
Germany
Germany
Japan
Singapore
Switzerland
U.K
U.S.A
India
India
Germany
Japan
Singapore
Switzerland
U.S.A
Singapore
Singapore
Singapore
DOCUMENT NO
REV
Page 21 of 23
Burner Management System
1
DuragIndustrieElektronikGmbh& Co Kg
2
Siemens Ag, Germany
3
Mitsubishi Heavy Industries Ltd.
4
Omron Corporation
5
6
Honeywell Inc.
Terminal Automation System
1
2
I/P Converter
1
2
Invensys (Foxboro)
3
Yokogawa Limited
4
5
Emerson Process Management Ltd
Instrument Power & Control Cables
1
Associated Cables Ltd.
2
Associated Flexibles & Wires Pvt. Ltd.
3
4
Insucon Cables & Conductors (P) Ltd. (For Smaller Non-Critical Projects)
5
J K Cables Limited
6
Kei Industries Limited
7
Paramount Cable Corporation
8
T C Communications Pvt Ltd
9
Thermo Cables Limited
10
Toshniwal Cables
11
Udey Pyro Cables Pvt Ltd
Extension & Compensating Cables
1
Associated Cables Ltd.
2
Associated Flexibles & Wires Pvt. Ltd.
3
4
5
J K Cables Limited
6
Kei Industries Limited
7
Paramount Cable Corporation
8
ThermopadsPvt. Ltd.
9
Toshniwal Cables
Cable Trays & Accessories (Al./Gi)
1
Globe Electrical Industries
2
Indiana Engg Works Pvt Ltd
3
Metalite Industries,
4
Parekh Engineering Company
5
Sadhana Engineering Corporation
6
Steelite Engineering Limited
Multi Transit Inlet System
1
MctBrattbergAktiebolag
2
RoxtecAb
3
Hawke International
Junction Box & Cable Gland
1
Baliga Lighting Equipments Limited
2
Ceag Flameproof Control Gears Pvt.Ltd.
3
Flameproof EquipmentsPvt. Ltd.
4
SS Tubes
1
Choksi Tube Company Ltd.
0
India
Germany
Japan
Japan
Japan
U.S.A
India
India
India
India
India
Japan
U.S.A.
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
India
Sweden
Sweden
U.K
India
India
India
Germany
India
2
Nuclear Fuel Complex
3
Ratnamani Metals & Tubes Limited
4
5
Nishitani& Co. Ltd.
6
Compression Fittings
1
Aura Inc
2
Baldota Valve & Fitting Co.Pvt.Ltd.
3
Excel Hydro-Pneumatics Pvt Ltd,
4
Excelsior Engg Works
5
Panam Engineers
6
Precision Engineering Industries
7
Reliance Engg. & Electrical Corpn.
8
Vikas Industrial Products
9
Arya Crafts & Engineering Pvt Ltd.
10
Fluid Controls Pvt Ltd
11
Parker Hannifin SingaporePte. Ltd.
12
Swagelock Company/Creximco
Instrument Miniature Valves
1.
Audco India Limited(L&T Valves Divn.)
2.
Aura Inc
3.
BHEL (Valves Division)
4.
Chemtrols Engineering Limited
5.
Excel Hydro-Pneumatics Pvt Ltd,
6.
Chemtrols Samil(India) Pvt Ltd
7.
Hyd- Air Engineering works Lonavla
8.
Excelsior Engg Works
9.
Ksb Pumps Limited (Valves Divn)
10.
Panam Engineers
11.
Tecnomatic (India) Pvt. Ltd.
12.
CellierS.A.
13.
BfeBonney Forge Valve Licensee
14.
Euromisure Cremona
15.
Technomatic Spa
16.
Kosei Sangyo Ltd
17.
18.
Dewrance& Co. Ltd.
19.
Hopkinsons Limited
20.
Velan Engineering Co. Limited
21.
Anderson Greenwood & Co.
22.
Crane Company Intl. Sales
23.
Swagelock Company/Creximco
Purge Rotameter
1.
Instrumentation Engineers Pvt. Ltd.
2.
Placka Instruments & Controls Pvt. Ltd.
3.
Eureca Industrial Equipments Pvt Ltd
Instrumentation Contractor for Construction/Erection Works
1.
Ani Instrument (up to 0.5 crores)
2.
Instrocon Engineers And Controls(i)Pvt.Ltd (up to 0.5 crores)
3.
Jasubhai Engineering Ltd. (up to 0.5 crores)
5.
L&T (construction contracts divn.)
6.
Miraj Instrumentation Service (up to 0.5 crores)
7.
Narayan Engineering (<rs. 5 lacs (small project))
8.
Pace Process Control Pvt.Ltd
9.
Petron Engg.Construction Ltd.
10.
Protech Control Pvt.Ltd. (up to 0.5 crores)
11.
Technimont Icb Ltd.
DOCUMENT NO
0
REV
Page 22 of 23
India
India
Japan
Japan
Japan
India
India
India
India
India
India
India
India
India
India
Singapore
U.S.A
India
India
India
India
India
India
India
India
India
India
India
France
Italy
Italy
Italy
Japan
Japan
U.K
U.K
U.K
U.S.A
U.S.A
U.S.A
India
India
India
India
India
India
India
India
India
India
India
India
India
DOCUMENT NO
Page 23 of 23
0
REV
NFVP/CWP/TI-002
TIE- IN LIST
COOLING TOWER PUMPS
NFL VIJAIPUR
TIE-IN LIST
NFVP/CWP/2013-TI-002
0
DOCUMENT NO
REV
REV DT
EFF DT
AV
PC
RKV
PPD
CKD
APPD
1 of 2
SHEET
NO
All rights reserved
S. No.
Tie In
P&ID No.
Line No.
1
TP-1
New P & I
36”-CW-205-01 B24
Sump of New Cooling Tower F3801 G
Sump of Existing Cooling Tower
F-3801 A-F
2
TP-2
New P & I
36”-CW-205-02 B24
Sump of New C. T. Cell F-3801 G
C. W. Pump P-3801 D Suction
3
TP-3
Y6
28”-CW-206.01 B24
C. W. Pump P-3801 D Discharge
28” CW-101.07 B20
4
TP-4
U10 A
28” CW-208.01.B24
28”-CW-108.01 B20
New Cooling Tower F-3801 G
New
Line
NFVP/CWP/P&I002-Amm-II
20”-CW208.02 B24
28” CW-208.01 B24
20”-CW208.03 B24
28” CW-218.01 B24
5
From
To
Rev.
6
TP-5
36”-08-CW-101 11 E
Sump New Cooling Tower F-4801 F
Sump Existing Cooling Tower
F-4801 A-E
7
TP-6
36”-08-CW-102 11E
Sump of New C. T. Cell F-4801 F
C. W. Pump P-4801 D Suction
8
TP-7
28”-08-CW-110 11E
C. W. Pump P-3801 D Discharge
28”-08- CW-27 11D-B
9
TP-8
32”-08- CW-103 11E
60”-08-CW-2 11D-B
New Cooling Tower F-4801 F
20”-08- CW-104 11E
32”-08- CW-103 11E
20”-08- CW-105 11E
32”-08- CW-103 11E
10
New
Line
NFVP/CWP/P&I002-Urea-II
TIE-IN LIST
NFVP/CWP/2013-TI-002
0
DOCUMENT NO
REV
REV DT
EFF DT
Remarks
Material shall
be Spec. B24
AV
PC
RKV
PPD
CKD
APPD
2 of 2
SHEET
NO
All rights reserved
TP- with Butterfly Valve & Spectacle
Blind for Line No. 28”-CW- from
new C.W. Pump P-3801 D
To new Cooling Tower Cell F-3801
G
28"-CW-208.01-B-20
Proposed new CT cell water interconnection
Chlorine injection
42"
Existing ACT
TP-1
Inter connection
TP-3
PG
36"
PG & PT
1"vent
36X24
20X28
28"
S
NEW CT
U
CELL
M
F-3801G
P
E-3504
66" Existing Supply header
P-3801D
Bellow
TP-2
66" Existing return header
Existing pumps
Bellow
E-3510A
E-3510B
TP-4
Comp
House
GV
section
Other utility
Legend :
Dotted lines - New proposed
Solid Line
-Existing
20"
20"
New Pump
2" drain
IBD Valve
P&I No. : NFVP/CWP/P&I-002-AMM-II
28"
Propose new CT cell water interconnection
new return header
32"
IBD
Chlorine injection
20"
20"
TP-5
TP-8
Existing UCT
Inter connection
TP-7
PG
1"vent
36"
PG & PT
36X24
36"
20X28
28"
S
U
M
P
New Pump
66" Existing Supply header
66" Existing return header
2" drain
Legend :
Dotted lines - New proposed
Solid Line
-Existing
Bellow
P-4801D
Bellow
TP-6
P&I No. : NFVP/CWP/P&I-002-UREA-II
New CT Cell
F-4801F

3 of 16 Drg and DocumentSchedule

Transcription

Similar documents

A golden opportunity to A golden opportunity to

AVS24 2.4 GHZ Wireless Audio/Video Sender

HEMINEVRIN - Alcohol and Alcoholism

No trophy could ever fully express our

Final New Corporate overview - PRINTING.

Building Capacity, Creating Jobs, Discovering and Developing

New User FFM Marketplace Testing

2013 dt 04.07.2013 on th - the official website of Bangalore Customs

WELCOME TO VARIOSYSTEMS

Chetana Profile 2014